2 din 250

14 EN 1176-5:2019 Playground equipment and surfacing - Part 5: Additional specific safety requirements and test methods for carousels Trim. 1

SM EN 1176-5:201530.04.2020

15 EN 1612:2019 Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements Trim. 1

SM SR EN 1612-1+A1:201130.04.2020

16 EN ISO 1833-9:2019 Textiles - Quantitative chemical analysis - Part 9: Mixtures of acetate with certain other fibres (method using benzyl alcohol) (ISO 1833-9:2019) Trim. 1

SM SR EN ISO 1833-9:201330.04.2020

17 EN ISO 1833-13:2019 Textiles - Quantitative chemical analysis - Part 13: Mixtures of certain chlorofibres with certain other fibres (method using carbon disulfide/acetone) (ISO 1833-13:2019) Trim. 1

SM EN ISO 1833-13:201530.04.2020

18 EN ISO 1833-14:2019 Textiles - Quantitative chemical analysis - Part 14: Mixtures of acetate with certain other fibres (method using glacial acetic acid) (ISO 1833-14:2019) Trim. 1

SM EN ISO 1833-14:201530.04.2020

19 EN 3155-003:2019 Aerospace series - Electrical contacts used in elements of connection - Part 003: Contacts, electrical, female, type A, crimp, class S - Product standard Trim. 1

SM EN 3155-003:201830.04.2020

20 EN ISO 3175-5:2019Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 5: Procedure for testing performance when cleaning and finishing using dibutoxymethane (ISO 3175-5:2019) Trim. 1

21 EN ISO 3175-6:2019Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 6: Procedure for testing performance when cleaning and finishing using decamethylpentacyclosiloxane (ISO 3175-6:2019) Trim. 1

22 EN ISO 3183:2019 Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO 3183:2019) Trim. 1

SM EN ISO 3183:2015 / SM EN ISO 3183:2015/A1:2018 30.04.2020

23 EN ISO 3233-2:2019Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Trim. 1

SM EN ISO 3233-2:201630.04.2020

24 EN 3278:2019 Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness) Trim. 1

SM EN 3278:201930.04.2020

25 EN ISO 3630-1:2019Dentistry - Endodontic instruments - Part 1: General requirements (ISO 3630-1:2019) Trim. 1

SM EN ISO 3630-1:201630.04.2020

26 EN 3660-033:2019 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 033: Stainless steel banding band, style Z, for attachment of individual and/or overall screens to cable outlets - Product standard Trim. 1

27 EN 3740:2019Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 coated - Classification: 1 100 MPa (at ambient temperature)/315 °C Trim. 1

SM EN 3740:201830.04.2020

28 EN ISO 3826-1:2019 Plastics collapsible containers for human blood and blood components - Part 1: Conventional containers (ISO 3826-1:2019) Trim. 1

SM EN ISO 3826-1:201630.04.2020

29 EN ISO 3964:2016/A1:2019 Dentistry - Coupling dimensions for handpiece connectors - Amendment 1: Interface dimensions (ISO 3964:2016/Amd 1:2018) Trim. 1

30 EN 4161:2019Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 PMa (at ambient temperature)/235 °C Trim. 1

SM EN 4161:2018 / SM EN 4161:2018/AC:2018 30.04.2020

3 din 250

31 EN 4165-022:2019Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 022: Insertion/extraction tool for removal of modules - Product standard Trim. 1

SM EN 4165-022:2019

30.04.2020

32 EN ISO 4259-1:2017/A1:2019Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test - Amendment 1 (ISO 4259-1:2017/Amd 1:2019) Trim. 1

33 EN ISO 4259-2:2017/A1:2019Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test - Amendment 1 (ISO 4259-2:2017/Amd 1:2019) Trim. 1

34 EN ISO 4489:2019Hardmetals - Sampling and testing (ISO 4489:2019) Trim. 1

35 EN 4539-2:2019Aerospace series - Bearing, spherical, plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations - Wide series - Dimensions and loads - Part 2: Inch series Trim. 1

36 EN 4854-1:2019

Aerospace series - Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, narrow series - Part 1: Dimensions and loads for narrow series Trim. 1

37 EN 4854-2:2019 Aerospace series - Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, wide series - Part 2: Dimensions and loads Trim. 1

38 EN 4854-3:2019Aerospace series — Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions — Part 3: Technical specification Trim. 1

39 EN ISO 4884:2019Hardmetals - Sampling and testing of powders using sintered test pieces (ISO 4884:2019) Trim. 1

SM EN 24884:201530.04.2020

40 EN ISO 5167-6:2019 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge meters (ISO 5167-6:2019) Trim. 1

41 EN ISO 5832-1:2019 Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO 5832-1:2016) Trim. 1

42 EN ISO 5832-6:2019 Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO 5832-6:1997) Trim. 1

43 EN ISO 5832-7:2019 Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy (ISO 5832-7:2016) Trim. 1

44 EN ISO 6145-1:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019) Trim. 1

SM SR EN ISO 6145-1:201230.04.2020

4 din 250

45 EN ISO 6218:2019Inland navigation vessels - Manually- and power-operated coupling devices for rope connections of pushing units and coupled vessels - Safety requirements and main dimensions (ISO 6218:2019) Trim. 1

SM EN ISO 6218:2017

30.04.2020

46 EN ISO 6246:2017/A1:2019 Petroleum products - Gum content of fuels - Jet evaporation method - Amendment 1: Purity requirement for n-heptane (ISO 6246:2017/Amd 1:2019) Trim. 1

47 EN ISO 6947:2019Welding and allied processes - Welding positions (ISO 6947:2019) Trim. 1

SM SR EN ISO 6947:201230.04.2020

48 EN ISO 8362-1:2019 Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO 8362-1:2018) Trim. 1

SM EN ISO 8362-1:2016 / SM EN ISO 8362-1:2016/A1:2016 30.04.2020

49 EN ISO 8384:2019Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2019) Trim. 1

SM EN ISO 8384:201830.04.2020

50 EN ISO 9455-16:2019 Soft soldering fluxes - Test methods - Part 16: Flux efficacy test, wetting balance method (ISO 9455-16:2019) Trim. 1

SM EN ISO 9455-16:201630.04.2020

51 EN ISO 9809-1:2019Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa (ISO 9809-1:2019) Trim. 1

SM EN ISO 9809-1:2016

30.04.2020

52 EN ISO 9809-2:2019Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2019) Trim. 1

SM EN ISO 9809-2:201630.04.2020

53 EN ISO 9809-3:2019 Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 3: Normalized steel cylinders and tubes (ISO 9809-3:2019) Trim. 1

SM EN ISO 9809-3:201630.04.2020

54 EN ISO 10426-3:2019 Petroleum and natural gas industries - Cements and materials for well cementing - Part 3: Testing of deepwater well cement formulations (ISO 10426-3:2019) Trim. 1

SM EN ISO 10426-3:201630.04.2020

55EN ISO 10555-6:2017/A1:2019

Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports - Amendment 1 (ISO 10555-6:2015/Amd 1:2019) Trim. 1

56 EN ISO 10642:2019 Fasteners - Hexagon socket countersunk head screws with reduced loadability (ISO 10642:2019) Trim. 1

SM EN ISO 10642:2019 / SM EN ISO 10642:2019/A1:2019 30.04.2020

57EN ISO 10893-3:2011/A1:2019

Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019) Trim. 1

58 EN ISO 11274:2019 Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:2019) Trim. 1

SM EN ISO 11274:201630.04.2020

59 EN ISO 11665-1:2019Measurement of radioactivity in the environment - Air: radon-222 - Part 1: Origins of radon and its short-lived decay products and associated measurement methods (ISO 11665-1:2019) Trim. 1

SM EN ISO 11665-1:201630.04.2020

60 EN ISO 11665-2:2019Measurement of radioactivity in the environment - Air: radon-222 - Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products (ISO 11665-2:2019) Trim. 1

SM EN ISO 11665-2:201630.04.2020

5 din 250

61 EN ISO 11665-11:2019 Measurement of radioactivity in the environment - Air: radon-222 - Part 11: Test method for soil gas with sampling at depth (ISO 11665-11:2016) Trim. 1

62 EN 12390-4:2019 Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines Trim. 1

SM SR EN 12390-4:201130.04.2020

63 EN 12390-16:2019Testing hardened concrete - Part 16: Determination of the shrinkage of concrete Trim. 1

64 EN 12390-17:2019Testing hardened concrete - Part 17: Determination of creep of concrete in compression Trim. 1

65 EN 12413:2019Safety requirements for bonded abrasive products Trim. 1

SM EN 12413+A1:201830.04.2020

66 EN 12449:2016+A1:2019Copper and copper alloys - Seamless, round tubes for general purposes Trim. 1

SM EN 12449:201630.04.2020

67 EN ISO 12821:2019Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2019) Trim. 1

SM EN ISO 12821:201730.04.2020

68 EN ISO 12944-5:2019 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2019) Trim. 1

SM EN ISO 12944-5:201830.04.2020

69 EN ISO 13076:2019 Paints and varnishes - Lighting and procedure for visual assessments of coatings (ISO 13076:2019) Trim. 1

SM EN ISO 13076:201630.04.2020

70 EN 13272-1:2019 Railway applications - Electrical lighting for rolling stock in public transport systems - Part 1: Heavy rail Trim. 1

SM EN 13272:201530.04.2020

71 EN 13272-2:2019 Railway applications - Electrical lighting for rolling stock in public transport systems - Part 2: Urban rail Trim. 1

SM EN 13272:201530.04.2020

72 EN ISO 13287:2019 Personal protective equipment - Footwear - Test method for slip resistance (ISO 13287:2019) Trim. 1

SM EN ISO 13287:201430.04.2020

73 EN 13674-2:2019 Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above Trim. 1

SM EN 13674-2+A1:201530.04.2020

74 EN ISO 13715:2019 Technical product documentation - Edges of undefined shape - Indication and dimensioning (ISO 13715:2017) Trim. 1

SM SR ISO 13715:201230.04.2020

75 EN ISO 13857:2019 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2019) Trim. 1

SM SR EN ISO 13857:201430.04.2020

76 EN 14366:2004+A1:2019 Laboratory measurement of noise from waste water installations Trim. 1 SM SR EN 14366:2011 30.04.2020

77 EN 14419:2019 District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Surveillance systems Trim. 1

SM SR EN 14419:201330.04.2020

78 EN ISO 14644-3:2019 Cleanrooms and associated controlled environments - Part 3: Test methods (ISO 14644-3:2019) Trim. 1

SM EN ISO 14644-3:201630.04.2020

79 EN ISO 14780:2017/A1:2019Solid biofuels - Sample preparation - Amendment 1 (ISO 14780:2017/Amd 1:2019) Trim. 1

80 EN 15154-5:2019 Emergency safety showers - Part 5: Water overhead body showers for sites other than laboratories Trim. 1

81 EN 15332:2019 Heating boilers - Energy assessment of hot water storage tanks Trim. 1 SM EN 15332:2017 30.04.2020

6 din 250

82 EN 15493:2019 Candles - Specification for fire safety Trim. 1 SM EN 15493:2018 30.04.2020

83 EN ISO 15607:2019 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2019) Trim. 1

SM SR EN ISO 15607:201430.04.2020

84 EN ISO 15609-1:2019 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2019) Trim. 1

SM SR EN ISO 15609-1:201430.04.2020

85 EN ISO 15609-2:2019 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2019) Trim. 1

SM SR EN ISO 15609-2:201430.04.2020

86 EN 15633-1:2019 Foodstuffs - Detection of food allergens by immunological methods - Part 1: General considerations Trim. 1

SM EN 15633-1:201530.04.2020

87 EN 15634-1:2019 Foodstuffs - Detection of food allergens by molecular biological methods - Part 1: General considerations Trim. 1

SM EN 15634-1:201530.04.2020

88 EN 15634-2:2019Foodstuffs - Detection of food allergens by molecular biological methods - Part 2: Celery (Apium graveolens) - Detection of a specific DNA sequence in cooked sausages by real-time PCR Trim. 1

89 EN 15698-1:2019District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipes, polyurethane thermal insulation and one casing of polyethylene Trim. 1

SM EN 15698-1:2018

30.04.2020

90 EN 15698-2:2019District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and one casing of polyethylene Trim. 1

SM EN 15698-2:201730.04.2020

91 EN 15804:2012+A2:2019 Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products Trim. 1

SM EN 15804+A1:201731.10.2022

92 EN 15842:2019 Foodstuffs - Detection of food allergens - General considerations and validation of methods Trim. 1

SM EN 15842:201530.04.2020

93 EN 16437:2014+A1:2019

Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on porous surfaces without mechanical action - Test method and requirements (phase 2, step 2) Trim. 1

SM EN 16437:2015

30.04.2020

94 EN 16612:2019 Glass in building - Determination of the lateral load resistance of glass panes by calculation Trim. 1

95 EN 16613:2019 Glass in building - Laminated glass and laminated safety glass - Determination of interlayer viscoelastic properties Trim. 1

96 EN 16641:2019 Textile floor coverings - Guidelines for acceptable colour deviations Trim. 1 SM CEN/TS 16641:2019 30.04.2020

97 CEN/TS 16794-1:2019 Public transport - Communication between contactless readers and fare media - Part 1: Implementation requirements for ISO/IEC 14443 Trim. 1

98 CEN/TS 16794-2:2019 Public transport - Communication between contactless readers and fare media - Part 2: Test plan for ISO/IEC 14443 Trim. 1

99 EN 17074:2019 Glass in building - Environmental product declaration - Product category rules for flat glass products Trim. 1

100 EN 17082:2019 Domestic and non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW Trim. 1

7 din 250

101 EN 17175:2019 Gas-fired overhead radiant strip heaters and multi-burner continuous radiant tube heater systems for non-domestic use - Safety and energy efficiency Trim. 1

SM SR EN 777-4:2012 , SM SR EN 416-2:2011

30.04.2020

102 EN 17248:2019 District heating and district cooling pipe systems - Terms and definitions Trim. 1

103 EN 17254:2019Foodstuffs - Minimum performance requirements for determination of gluten by ELISA Trim. 1

104 EN 17256:2019 Animal feeding stuffs: Methods of sampling and analysis - Determination of ergot alkaloids and tropane alkaloids in feed materials and compound feeds by LC-MS/MS Trim. 1

105 EN 17270:2019Animal feeding stuffs: Methods of sampling and analysis - Determination of theobromine in feed materials and compound feed, including cocoa derived ingredients, by liquid chromatography Trim. 1

106 EN 17277:2019 Hydrometry - Measurement requirements and classification of rainfall intensity measuring instruments Trim. 1

107 EN 17279:2019Foodstuffs - Multimethod for the screening of aflatoxin B1, deoxynivalenol, fumonisin B1 and B2, ochratoxin A, T-2 toxin, HT-2 toxin and zearalenone in foodstuffs, excluding foods for infants and young children, by LC-MS/MS Trim. 1

108 EN 17280:2019Foodstuffs - Determination of zearalenone and trichothecenes including deoxynivalenol and its acetylated derivatives (3-acetyl-deoxynivalenol and 15-acetyl-deoxynivalenol), nivalenol T-2 toxin and HT-2 toxin in cereals and cereal products by LC-MS/MS Trim. 1

109 CEN/TS 17378:2019Intelligent transport systems - Urban ITS - Air quality management in urban areas Trim. 1

110 CEN/TS 17380:2019 Intelligent transport systems - Urban-ITS - 'Controlled Zone' management for UVARs using C-ITS Trim. 1

111 CEN/TR 17426:2019Sanitary appliances - Drainage systems for the application of sanitary appliances Trim. 1

112 EN ISO 17872:2019 Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2019) Trim. 1

SM EN ISO 17872:201630.04.2020

113 EN ISO 18388:2019 Technical product documentation (TPD) - Relief grooves - Types and dimensioning (ISO 18388:2016) Trim. 1

114EN ISO 18640-1:2018/A1:2019

Protective clothing for firefighters - Physiological impact - Part 1: Measurement of coupled heat and moisture transfer with the sweating torso - Amendment 1 (ISO 18640-1:2018/Amd 1:2019) Trim. 1

115EN ISO 18640-2:2018/A1:2019

Protective clothing for firefighters - Physiological impact - Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters - Amendment 1 (ISO 18640-2:2018/Amd 1:2019) Trim. 1

116 EN ISO 18647:2019 Petroleum and natural gas industries - Modular drilling rigs for offshore fixed platforms (ISO 18647:2017) Trim. 1

8 din 250

117 EN ISO 18674-5:2019 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 5: Stress change measurements by total pressure cells (TPC) (ISO 18674-5:2019) Trim. 1

118 EN ISO 18862:2019 Coffee and coffee products - Determination of acrylamide - Methods using HPLC-MS/MS and GC-MS after derivatization (ISO 18862:2016) Trim. 1

119 EN ISO 19225:2017/A1:2019Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems - Amendment 1 (ISO 19225:2017/Amd 1:2019) Trim. 1

120 CEN ISO/TS 19468:2019 Intelligent transport systems - Data interfaces between centres for transport information and control systems - Platform independent model specifications for data exchange protocols for transport information and control systems (ISO/TS 19468:2019) Trim. 1

121 EN ISO 19903:2019Petroleum and natural gas industries - Concrete offshore structures (ISO 19903:2019) Trim. 1

SM EN ISO 19903:201630.04.2020

122 EN ISO 19905-3:2019 Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - Part 3: Floating unit (ISO 19905-3:2017) Trim. 1

123 EN ISO 20028-1:2019 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specification (ISO 20028-1:2019) Trim. 1

SM EN ISO 20028-1:201730.04.2020

124 EN ISO 20088-3:2019 Determination of the resistance to cryogenic spillage of insulation materials - Part 3: Jet release (ISO 20088-3:2018) Trim. 1

125 EN ISO 20186-3:2019Molecular in-vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 3: Isolated circulating cell free DNA from plasma (ISO 20186-3:2019) Trim. 1

126 EN ISO 20337:2019Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018) Trim. 1

127 EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017) Trim. 1

128 EN ISO 20846:2019 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2019) Trim. 1

SM EN ISO 20846:201630.04.2020

129 EN ISO 20884:2019 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2019) Trim. 1

SM EN ISO 20884:201630.04.2020

130 EN ISO 20896-1:2019 Dentistry - Digital impression devices - Part 1: Methods for assessing accuracy (ISO 20896-1:2019) Trim. 1

131 CEN ISO/TS 21177:2019 Intelligent transport systems - ITS station security services for secure session establishment and authentication between trusted devices (ISO/TS 21177:2019) Trim. 1

132 EN ISO 21253-1:2019Water quality - Multi-compound class methods - Part 1: Criteria for the identification of target compounds by gas and liquid chromatography and mass spectrometry (ISO 21253-1:2019) Trim. 1

9 din 250

133 EN ISO 21253-2:2019Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019) Trim. 1

134 EN ISO 21268-1:2019Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials - Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter (ISO 21268-1:2019) Trim. 1

SM CEN ISO/TS 21268-1:201930.04.2020

135 EN ISO 21268-2:2019Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like material - Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter (ISO 21268-2:2019) Trim. 1

SM CEN ISO/TS 21268-2:2019

30.04.2020

136 EN ISO 21268-3:2019 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials - Part 3: Up-flow percolation test (ISO 21268-3:2019) Trim. 1

SM CEN ISO/TS 21268-3:201930.04.2020

137 EN ISO 21416:2019 Recreational diving services - Requirements and guidance on environmentally sustainable practices in recreational diving (ISO 21416:2019) Trim. 1

138 EN ISO 21417:2019 Recreational diving services - Requirements for training on environmental awareness for recreational divers (ISO 21417:2019) Trim. 1 30.04.2020

139 EN ISO 21572:2019 Foodstuffs - Molecular biomarker analysis - Immunochemical methods for the detection and quantification of proteins (ISO 21572:2019) Trim. 1

SM EN ISO 21572:201630.04.2020

140 EN ISO 21877:2019 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019) Trim. 1

141 EN ISO 21968:2019

Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019) Trim. 1

SM SR EN ISO 21968:201230.04.2020

142 EN ISO 23611-3:2019 Soil quality - Sampling of soil invertebrates - Part 3: Sampling and extraction of enchytraeids (ISO 23611-3:2019) Trim. 1

SM EN ISO 23611-3:201330.04.2020

143 EN ISO 25066:2019

Evaluation (SQuaRE) - Common Industry Format (CIF) for Usability - Evaluation Report (ISO/IEC 25066:2016) Trim. 1

144 CEN ISO/TS 25107:2019 Non-destructive testing - NDT training syllabuses (ISO/TS 25107:2019) Trim. 1

145 EN ISO 25177:2019 Soil quality - Field soil description (ISO 25177:2019) Trim. 1 SM EN ISO 25177:2016 30.04.2020

146 EN ISO 27065:2017/A1:2019Protective clothing - Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers - Amendment 1: Surrogate test chemical (ISO 27065:2017/Amd 1:2019) Trim. 1

147 EN ISO 28258:2013/A1:2019 Soil quality - Digital exchange of soil-related data - Amendment 1 (ISO 28258:2013/Amd 1:2019) Trim. 1

148 EN ISO 28721-1:2019 Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories (ISO 28721-1:2019) Trim. 1

SM EN ISO 28721-1:201630.04.2020

149 EN ISO 29464:2019 Cleaning of air and other gases - Terminology (ISO 29464:2017) Trim. 1 SM EN 14799:2015 30.04.2020

150 EN ISO 35101:2019 Petroleum and natural gas industries - Arctic operations - Working environment (ISO 35101:2017) Trim. 1

10 din 250

151 EN ISO 35103:2019 Petroleum and natural gas industries - Arctic operations - Environmental monitoring (ISO 35103:2017) Trim. 1

152 CEN ISO/TS 35105:2019 Petroleum and natural gas industries - Arctic operations - Material requirements for arctic operations (ISO/TS 35105:2018) Trim. 1

153 EN ISO 35106:2019 Petroleum and natural gas industries - Arctic operations - Metocean, ice, and seabed data (ISO 35106:2017) Trim. 1

154 EN ISO/ASTM 52910:2019 Additive manufacturing - Design - Requirements, guidelines and recommendations (ISO/ASTM 52910:2018) Trim. 1

155 EN ISO 52911-2:2019 Additive manufacturing - Design - Part 2: Laser-based powder bed fusion of polymers (ISO/ASTM 52911-2:2019) Trim. 1

156 EN ISO 80000-2:2019 Quantities and units - Part 2: Mathematics (ISO 80000-2:2019) Trim. 1 SM EN ISO 80000-2:2016 30.04.2020

157 EN ISO 80000-4:2019 Quantities and units - Part 4: Mechanics (ISO 80000-4:2019) Trim. 1 SM SR EN ISO 80000-4:2014 30.04.2020

158 EN ISO 80000-5:2019 Quantities and units - Part 5: Thermodynamics (ISO 80000-5:2019) Trim. 1 SM SR EN ISO 80000-5:2014 30.04.2020

159 EN ISO 80000-9:2019 Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2019) Trim. 1

SM EN ISO 80000-9:201630.04.2020

160 EN ISO 80000-10:2019Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2019) Trim. 1

SM EN ISO 80000-10:201630.04.2020

161 EN ISO 80000-12:2019Quantities and units - Part 12: Condensed matter physics (ISO 80000-12:2019) Trim. 1

SM EN ISO 80000-12:201630.04.2020

162 EN ISO/IEC 80079-20-1:2019 Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data (ISO/IEC 80079-20-1:2017) Trim. 1

163 EN 50186-2:1998/A1:2019 Live-line washing systems for power installations with nominal voltages above 1kV - Part 2: Specific national requirements (national annexes to EN 50186-1:1998) Trim. 1

164 EN 50238-1:2019 Railway applications - Compatibility between rolling stock and train detection systems - Part 1: General Trim. 1

SM SR EN 50238-1:2013 / SM EN 50238-1:2017/AC:2017 09.09.2022

165 EN 50342-2:2019Lead-acid starter batteries - Part 2: Dimensions of batteries and marking of terminals Trim. 1

SM EN 50342-2:2015 / SM EN 50342-2:2015/A1:2015 19.08.2022

166 EN 50413:2019 Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz) Trim. 1

SM EN 50413:2016 / SM EN 50413:2016/A1:2017 23.09.2022

167 EN 50499:2019 Procedure for the assessment of the exposure of workers to electromagnetic fields Trim. 1 SM SR EN 50499:2013 20.08.2022

168 EN 60062:2016/A1:2019 Marking codes for resistors and capacitors Trim. 1

169 EN IEC 60068-3-3:2019 Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment Trim. 1

SM SR EN 60068-3-3:201327.09.2022

170 EN IEC 60071-1:2019 Insulation co-ordination - Part 1: Definitions, principles and rules Trim. 1SM SR EN 60071-1:2013 / SM SR EN 60071-1:2013/A1:2013 12.09.2022

171 EN IEC 60311:2019Electric irons for household or similar use - Methods for measuring performance Trim. 1

SM SR EN 60311:2012 / SM SR EN 60311:2012/A1:2012 / SM SR EN 60311:2012/A2:2012 11.10.2022

11 din 250

172 EN 60317-0-1:2014/A1:2019 Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire Trim. 1

173 EN 60317-0-3:2008/A2:2019 Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire Trim. 1

174 EN IEC 60317-0-8:2019Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass-fibre wound unvarnished and fused, or resin or varnish impregnated, bare or enamelled rectangular copper wire Trim. 1

SM EN 60317-0-8:2017

24.09.2022

175 EN IEC 60317-80:2019 Specifications for particular types of winding wires - Part 80: Polyvinyl acetal enamelled rectangular copper wire, class 120, with a bonding layer Trim. 1

176 EN IEC 60384-11:2019 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil DC capacitors Trim. 1

SM EN 60384-11:201426.09.2022

177 EN 60601-2-4:2011/A1:2019 Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators Trim. 1

178 EN 60601-2-63:2015/A1:2019 Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment Trim. 1

179 EN IEC 60601-2-75:2019 Medical Electrical Equipment - Part 2-75: Particular requirements for the basic safety and essential performance of photodynamic therapy and photodynamic diagnosis equipment Trim. 1

180 EN IEC 60684-3-214:2019Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall Trim. 1

SM EN 60684-3-214:2017

12.09.2022

181 EN IEC 60684-3-216:2019 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving Trim. 1

SM EN 60684-3-216:2017 / SM EN 60684-3-216:2017/A2:2017

12.09.2022

182 EN IEC 60684-3-247:2019Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall Trim. 1

SM EN 60684-3-247:2017 / SM EN 60684-3-247:2017/A1:2017

12.09.2022

183 EN IEC 60684-3-280:2019 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking Trim. 1

SM EN 60684-3-280:2017 / SM EN 60684-3-280:2017/A1:2017 24.09.2022

184 EN IEC 60684-3-283:2019 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation Trim. 1

SM EN 60684-3-283:2017 / SM EN 60684-3-283:2017/A1:2017

24.09.2022

185 EN 60851-3:2009/A2:2019 Winding wires - Test methods - Part 3: Mechanical properties Trim. 1

186 EN IEC 60904-7:2019 Photovoltaic devices - Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices Trim. 1

SM SR EN 60904-7:201324.09.2022

187EN IEC 61000-4-18:2019/AC:2019-10

Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test Trim. 1

12 din 250

188 EN 61191-2:2017/AC:2019-10 Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies Trim. 1

189 EN IEC 61333:2019 Marking on ferrite cores Trim. 1 SM EN 61333:2017 03.09.2022

190 EN IEC 62327:2019Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the estimation of ambient dose equivalent rate from photon radiation Trim. 1

SM EN 62327:201607.10.2022

191 EN IEC 62401:2019 Radiation protection instrumentation - Alarming personal radiation devices (PRDs) for the detection of illicit trafficking of radioactive material Trim. 1

192EN IEC 62443-3-3:2019/AC:2019-10

Industrial communication networks - Network and system security - Part 3-3: System security requirements and security levels Trim. 1

193 EN 62734:2015/A1:2019 Industrial networks - Wireless communication network and communication profiles - ISA 100.11a Trim. 1

194 EN 62751-2:2014/A1:2019 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters Trim. 1

195 EN IEC 62885-8:2019 Surface cleaning appliances - Part 8: Dry vacuum cleaners for commercial use - Methods for measuring the performance Trim. 1

196 EN IEC 63137-1:2019 Standard test radio-frequency connectors - Part 1: Generic specification - General requirements and test methods Trim. 1

197 EN IEC 80601-2-49:2019 Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment Trim. 1

198 EN IEC 80601-2-59:2019Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening Trim. 1

SM EN 80601-2-59:2014

11.10.2022

199 EN ISO 389-7:2019Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions (ISO 389-7:2019) Trim. 1

SM EN ISO 389-7:2015 / SM EN ISO 389-7:2015/A1:2017

31.05.2020

200 EN 510:2019 Specification for protective clothing for use where there is a risk of entanglement with moving parts Trim. 1

SM SR EN 510:201031.05.2020

201 EN 1015-11:2019 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar Trim. 1

SM SR EN 1015-11:2010 / SM SR EN 1015-11:2010/A1:2010 31.05.2020

202 EN 1130:2019 Children's furniture - Cribs - Safety requirements and test methods Trim. 1SM SR EN 1130-1:2012 / SM SR EN 1130-2:2012 31.05.2020

203 EN 1269:2019 Textile floor coverings - Assessment of impregnations in needled floor coverings by means of a soiling test Trim. 1

SM EN 1269:201631.05.2020

204 EN 1366-12:2014+A1:2019 Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork Trim. 1

SM EN 1366-12:201531.05.2020

205 EN ISO 1833-15:2019 Textiles - Quantitative chemical analysis - Part 15: Mixtures of jute with certain animal fibres (method by determining nitrogen content) (ISO 1833-15:2019) Trim. 1

SM EN ISO 1833-15:201531.05.2020

13 din 250

206 EN 1971-1:2019Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface Trim. 1

SM EN 1971-1:201431.05.2020

207 EN 1971-2:2019 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface Trim. 1

SM EN 1971-2:201431.05.2020

208 EN 2002-16:2019 Aerospace series - Metallic materials - Test methods - Part 16: Non-destructive testing - Penetrant testing Trim. 1

209 EN 2002-21:2019 Aerospace series - Metallic materials - Test methods - Part 21: Radiographic testing of castings Trim. 1

210 EN 2400:2019 Aerospace series - Heat resisting nickel base alloy NI-P96-HT - Cold drawn and precipitation treated - Wire - D ≤ 10 mm Trim. 1

211 EN ISO 2440:2019Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:2019) Trim. 1

SM EN ISO 2440:2016 / SM EN ISO 2440:2016/A1:2016 / SM EN ISO 2440:2016/A2:2016 31.05.2020

212 EN 2943:2019Aerospace series - Inserts, MJ and M screw threads, helical coil - Technical specification Trim. 1

SM EN 2943:201831.05.2020

213 EN 3468:2019 Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 MPa ≤ Rm ≤ 700 MPa - Forgings - De ≤ 100 mm Trim. 1

214 EN 3481:2019 Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat treatment: softened - Hollow bars - 5 mm ≤ a ≤ 12 mm Trim. 1

215 EN 3482:2019 Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat treatment: softened - Forging stock - De ≤ 100 mm Trim. 1

216 EN ISO 4180:2019 Packaging - Complete, filled transport packages - General rules for the compilation of performance test schedules (ISO 4180:2019) Trim. 1

SM EN ISO 4180:201431.05.2020

217 EN 4609:2019 Aerospace series - Spiral drive recesses for threaded fasteners - Geometrical definition and technical requirements Trim. 1

218 EN ISO 8504-1:2019 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2019) Trim. 1

SM EN ISO 8504-1:201631.05.2020

219 EN ISO 8504-2:2019 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2019) Trim. 1

SM EN ISO 8504-2:201631.05.2020

220 EN ISO 9090:2019Gas tightness of equipment for gas welding and allied processes (ISO 9090:2019) Trim. 1

SM SR EN 29090:201231.05.2020

221 EN 9138:2019 Aerospace Series - Quality Management Systems - Statistical Product - Acceptance Requirements Trim. 1

222 EN ISO 9693:2019 Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems (ISO 9693:2019) Trim. 1

SM EN ISO 9693-1:2016 / SM EN ISO 9693-2:2016 31.05.2020

223 EN ISO 11135:2014/A1:2019Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices - Amendment 1: Revision of Annex E, Single batch release (ISO 11135:2014/Amd 1:2018) Trim. 1

14 din 250

224EN ISO 11137-1:2015/A2:2019

Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices - Amendment 2: Revision to 4.3.4 and 11.2 (ISO 11137-1:2006/Amd 2:2018) Trim. 1

225 EN ISO 11197:2019 Medical supply units (ISO 11197:2019) Trim. 1 SM EN ISO 11197:2016 31.05.2020

226 EN ISO 11551:2019 Optics and photonics - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO 11551:2019) Trim. 1

SM EN ISO 11551:201331.05.2020

227 EN ISO 12759-4:2019 Fans - Efficiency classification for fans - Part 4: Driven fans at maximum operating speed (ISO 12759-4:2019) Trim. 1

SM EN ISO 12759:201731.05.2020

228 EN 13422:2019 Vertical road signs - Portable deformable warning devices and delineators - Portable road traffic signs - Cones and cylinders Trim. 1

SM SR EN 13422+A1:201331.05.2020

229 EN 13819-3:2019Hearing protectors - Testing - Part 3: Supplementary acoustic test methods Trim. 1

230 EN ISO 13919-1:2019Electron and laser-beam welded joints - Requirements and recommendations on quality levels for imperfections - Part 1: Steel, nickel, titanium and their alloys (ISO 13919-1:2019) Trim. 1

SM SR EN ISO 13919-1:201231.05.2020

231 EN 14752:2019 Railway applications - Bodyside entrance systems for rolling stock Trim. 1 SM EN 14752:2015 31.05.2020

232 EN 14901-1:2014+A1:2019 Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty) Trim. 1

SM EN 14901:201731.05.2020

233 EN 14901-2:2019Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO) Trim. 1

234 EN ISO 15002:2008/A1:2019 Flow-metering devices for connection to terminal units of medical gas pipeline systems - Amendment 1 (ISO 15002:2008/Amd 1:2018) Trim. 1

235 EN 15494:2019 Candles - Product safety labels Trim. 1 SM EN 15494:2018 31.05.2020

236 EN ISO 15614-7:2019 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2016) Trim. 1

SM EN ISO 15614-7:201731.05.2020

237 EN 15898:2019 Conservation of cultural heritage - Main general terms and definitions Trim. 1 SM EN 15898:2018 31.05.2020

238 EN 16090:2019 Copper and copper alloys - Estimation of average grain size by ultrasound Trim. 1 SM EN 16090:2014 31.05.2020

239 EN 16185-2:2014+A1:2019Railway applications - Braking systems of multiple unit trains - Part 2: Test methods Trim. 1

SM EN 16185-2:201731.05.2020

240 EN 16207:2014+A1:2019 Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock Trim. 1

SM EN 16207:201731.05.2020

241 EN 16214-1:2012+A1:2019 Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology Trim. 1

SM EN 16214-1:201731.05.2020

242 EN 16214-4:2013+A1:2019Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 4: Calculation methods of the greenhouse gas emission balance using a life cycle analysis approach Trim. 1

SM EN 16214-4:201731.05.2020

15 din 250

243 CEN/TS 16459:2019 External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187 Trim. 1

244 EN 16603-11:2019 Space engineering - Definition of the Technology Readiness Levels (TRLs) and their criteria of assessment (ISO 16290:2013, modified) Trim. 1

245 EN 16809-1:2019Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose-fill products before installation Trim. 1

246 EN 16931-1:2017+A1:2019 Electronic invoicing - Part 1: Semantic data model of the core elements of an electronic invoice Trim. 1

SM EN 16931-1:201731.05.2020

247 EN ISO/IEC 17029:2019 Conformity Assessment - General principles and requirements for validation and verification bodies (ISO/IEC 17029:2019) Trim. 1

248 EN 17122:2019Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements - Phase2, step2 Trim. 1

249 EN 17194:2019

Deoxynivalenol, Aflatoxin B1, Fumonisin B1 & B2, T-2 & HT-2 toxins, Zearalenone and Ochratoxin A in feed materials and compound feed by LC-MS/MS Trim. 1

250 EN 17266:2019 Foodstuffs - Determination elements and their chemical species - Determination of organomercury in seafood by elemental mercury analysis Trim. 1

251 EN 17269:2019 Health informatics - The International Patient Summary Trim. 1

252 CEN/TS 17385:2019 Method for condition assessment of immobile constructed assets Trim. 1

253 CEN/TS 17395:2019Intelligent transport systems - eSafety - eCall for automated and autonomous vehicles Trim. 1

254 EN ISO 19036:2019 Microbiology of the food chain - Estimation of measurement uncertainty for quantitative determinations (ISO 19036:2019) Trim. 1

255 EN ISO 22041:2019/A1:2019 Refrigerated storage cabinets and counters for professional use - Performance and energy consumption (ISO 22041:2019) Trim. 1

256 EN ISO 22125-1:2019 Water quality - Technetium-99 - Part 1: Test method using liquid scintillation counting (ISO 22125-1:2019) Trim. 1

257 EN ISO 22125-2:2019 Water quality - Technetium-99 - Part 2: Test method using inductively coupled plasma mass spectrometry (ICP-MS) (ISO 22125-2:2019) Trim. 1

258 EN ISO 22301:2019 Security and resilience - Business continuity management systems - Requirements (ISO 22301:2019) Trim. 1

SM EN ISO 22301:201631.05.2020

259 EN ISO 24550:2019Ergonomics - Accessible design - Indicator lights on consumer products (ISO 24550:2019) Trim. 1

260 EN ISO 24551:2019 Ergonomics - Accessible design - Spoken instructions of consumer products (ISO 24551:2019) Trim. 1

261 EN ISO 25424:2019Sterilization of health care products - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2018) Trim. 1

SM EN ISO 25424:2014

31.05.2020

262 EN 45555:2019 General methods for assessing the recyclability and recoverability of energy-related products Trim. 1

16 din 250

263 EN 50465:2015/A1:2019 Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW Trim. 1

264EN ISO 80601-2-13:2012/A1:2019

Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation - Amendment 1 (ISO 80601-2-13:2011/Amd 1:2015) Trim. 1

265EN ISO 80601-2-13:2012/A2:2019

Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation - Amendment 2 (ISO 80601-2-13:2011/Amd 2:2018) Trim. 1

266 EN ISO 81060-2:2019 Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type (ISO 81060-2:2018) Trim. 1

SM EN ISO 81060-2:201530.11.2022

267 EN 50104:2019 Electrical equipment for the detection and measurement of oxygen - Performance requirements and test methods Trim. 1

SM SR EN 50104:201426.08.2022

268 EN 50411-3-3:2019Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-3: Singlemode optical fibre fusion splice protectors Trim. 1

SM EN 50411-3-3:201930.09.2020

269 CLC/TS 50586:2019 Open Smart Grid Protocol (OSGP) Trim. 1

270 EN 50632-2-6:2015/A1:2019 Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hammers Trim. 1

271 EN 50980-1:2019 Remote alcohol monitoring devices - Test methods and performance requirements - Part 1: Instruments for assessment programmes Trim. 1

272 EN 55035:2017/AC:2019-11Electromagnetic compatibility of multimedia equipment - Immunity requirements Trim. 1

273 EN 60068-2-64:2008/A1:2019 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance Trim. 1

274EN IEC 60086-4:2019/AC:2019-11 Primary batteries - Part 4: Safety of lithium batteries Trim. 1

275 EN IEC 60118-9:2019 Electroacoustics - Hearing aids - Part 9: Methods of measurement of the performance characteristics of bone conduction hearing aids Trim. 1

276 EN 60335-2-4:2010/A2:2019 Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors Trim. 1

277 EN 60335-2-7:2010/A2:2019 Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines Trim. 1

278EN 60335-2-52:2003/A12:2019

Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances Trim. 1

279 EN IEC 60335-2-111:2019 Household and similar electrical appliances - Safety - Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part Trim. 1

280 EN IEC 60384-16:2019 Fixed capacitors for use in electronic equipment - Part 16: Sectional specification - Fixed metallized polypropylene film dielectric DC capacitors Trim. 1

281 EN IEC 60565-2:2019 Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 2: Procedures for low frequency pressure calibration Trim. 1

282 EN IEC 60601-2-46:2019 Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables Trim. 1

SM EN 60601-2-46:201515.11.2022

17 din 250

283 EN 60644:2009/A1:2019 Specification for high-voltage fuse-links for motor circuit applications Trim. 1

284 EN IEC 60794-1-23:2019 Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods Trim. 1

SM EN 60794-1-23:201913.11.2022

285 EN 60851-5:2008/A2:2019 Winding wires - Test methods - Part 5: Electrical properties Trim. 1

286 EN IEC 60917-1:2019 Modular order for the development of mechanical structures for electrical and electronic equipment practices - Part 1: Generic standard Trim. 1

287 EN IEC 60974-3:2019 Arc welding equipment - Part 3: Arc striking and stabilizing devices Trim. 1 SM EN 60974-3:2015 08.11.2022

288 EN IEC 60974-7:2019 Arc welding equipment - Part 7: Torches Trim. 1 SM EN 60974-7:2015 08.11.2022

289 EN IEC 61000-3-11:2019Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection Trim. 1

SM EN 61000-3-11:201501.11.2022

290 EN IEC 61076-3-123:2019Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking Trim. 1

291 EN IEC 61169-1-2:2019 Radio-frequency connectors - Part 1-2: Electrical test methods - Insertion loss Trim. 1

292 EN IEC 61169-64:2019 Radio frequency connectors - Part 64: Sectional specification - RF coaxial connectors with 0,8 mm inner diameter of outer conductor - Characteristic impedance 50 Ω (type 0,8) Trim. 1

293 EN IEC 61223-3-5:2019Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests and and constancy tests - Imaging performance of computed tomography X-ray equipment Trim. 1

SM EN 61223-3-5:201621.10.2022

294 EN IEC 61300-3-21:2019 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time Trim. 1

SM EN 61300-3-21:201725.10.2020

295 EN 61400-2:2014/AC:2019-11 Wind turbines - Part 2: Small wind turbines Trim. 1

296EN 61400-11:2013/A1:2018/AC:2019-11 Wind turbines - Part 11: Acoustic noise measurement techniques Trim. 1

297 EN 61709:2017/AC:2019-11 Electric components - Reliability - Reference conditions for failure rates and stress models for conversion Trim. 1

298 EN IEC 62025-2:2019 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics Trim. 1

SM EN 62025-2:201725.10.2022

299EN IEC 62040-1:2019/AC:2019-11 Uninterruptible power systems (UPS) - Part 1: Safety requirements Trim. 1

300 EN IEC 62209-3:2019Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 3: Vector measurement-based systems (Frequency range Trim. 1

301 EN IEC 62275:2019Cable management systems - Cable ties for electrical installations Trim. 1

SM EN 62275:201629.11.2022

18 din 250

302 EN IEC 62290-3:2019 Railway applications - Urban guided transport management and command/control systems - Part 3: System requirements specification Trim. 1

303 EN IEC 62343-2-1:2019 Dynamic modules - Part 2-1: Reliability qualification - Test template Trim. 1 SM EN 62343-2:2016 21.10.2022

304 EN 62657-2:2017/A1:2019 Industrial communication networks - Wireless communication networks - Part 2: Coexistence management Trim. 1

305 EN IEC 62668-1:2019 Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components Trim. 1

306 EN IEC 62680-1-5:2019 Universal serial bus interfaces for data and power - Part 1-5: Common components - USB Audio 3.0 device class definition Trim. 1

307 EN IEC 62680-1-6:2019 Universal serial bus interfaces for data and power - Part 1-6: Common components - USB Audio 3.0 device class definition basic functions Trim. 1

308 EN IEC 62680-1-7:2019 Universal serial bus interfaces for data and power - Part 1-7: Common components - USB Audio 3.0 device class definition data formats Trim. 1

309 EN IEC 62680-1-8:2019 Universal serial bus interfaces for data and power - Part 1-8: Common components - USB Audio 3.0 device class definition terminal types Trim. 1

310 EN IEC 62858:2019Lightning density based on lightning location systems (LLS) - General principles Trim. 1

SM EN 62858:201713.11.2022

311 EN IEC 62878-2-5:2019 Device embedding assembly technology - Part 2-5: Guidelines - Implementation of a 3D data format for device embedded substrate Trim. 1

312 EN IEC 62962:2019 Particular requirements for load-shedding equipment (LSE) Trim. 1

313 EN IEC 62985:2019Methods for calculating size specific dose estimates (SSDE) on computed tomography Trim. 1

314 EN IEC 63013:2019 LED packages - Long-term luminous and radiant flux maintenance projection Trim. 1

315 EN IEC 63033-3:2019 Car multimedia systems and equipment - Drive monitoring system - Part 3: Measurement methods Trim. 1

316 EN IEC 63044-5-1:2019 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up Trim. 1

317 EN IEC 63044-5-2:2019

Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments Trim. 1

318 EN IEC 63044-5-3:2019

systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments Trim. 1

319 EN IEC 63136:2019Electric dishwashers for commercial use - Test methods for measuring the performance Trim. 1

SM EN 50593:201824.10.2022

320 EN IEC 63138-1:2019 Multi-channel radio frequency connectors - Part 1: Generic specification - General requirements and test methods Trim. 1

321 EN 54-13:2017+A1:2019 Fire detection and fire alarm systems - Part 13: Compatibility and connectability assessment of system components Trim. 1

SM EN 54-13:201730.06.2020

322 EN ISO 180:2019 Plastics - Determination of Izod impact strength (ISO 180:2019) Trim. 1

19 din 250

323 EN 234:2019Wallcoverings in roll form - Specification for wallcoverings for subsequent decoration Trim. 1

324 CEN/TS 1451-2:2019Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity Trim. 1

325 CEN/TS 1852-2:2019 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity Trim. 1

326 EN 2451:2019Aerospace series - Steel 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 420 MPa - Forgings - De ≤ 40 mm Trim. 1

327 EN 2476:2019 Aerospace series - Steel 30CrNiMo8 (1.6580) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Forgings - De ≤ 100 mm Trim. 1

328 EN 2502:2019 Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa - Bars Trim. 1

329 EN 2503:2019 Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa - Forgings - De ≤ 150 mm Trim. 1

330 EN 2997-011:2019Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire resistant or non fire resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 011: Dummy receptacle - Product standard Trim. 1

331 EN 3018:2019 Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D ≤ 3 mm Trim. 1

332 EN 3155-016:2019 Aerospace series - Electrical contacts used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S - Product standard Trim. 1

333 EN 3155-019:2019 Aerospace series - Electrical contacts used in elements of connection - Part 019: Contacts, electrical, female, type A, crimp, class S - Product standard Trim. 1

334 EN 3155-044:2019 Aerospace series - Electrical contacts used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard Trim. 1

335 EN 3155-045:2019 Aerospace series - Electrical contacts used in elements of connection - Part 045: Contacts, electrical, female, type A, double crimping, class T - Product standard Trim. 1

336 EN 3155-076:2019 Aerospace series - Electrical contacts used in elements of connection - Part 076: Contacts, electrical, male, type A, crimp, class R - Product standard Trim. 1

337 EN 3155-077:2019 Aerospace series - Electrical contacts used in elements of connection - Part 077: Contacts, electrical, female, type A, crimp, class R - Product standard Trim. 1

338 EN ISO 3233-1:2019

1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes principle (ISO 3233-1:2019) Trim. 1

339 EN 3484:2019

treatment: homogenised, solution treated, precipitation hardened and sub zero - Remelting stock Trim. 1

340 EN 3486:2019 Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Solution annealed and precipitation hardened - 1 400 ≤ Rm ≤ 1 550 MPa - Forgings - De ≤ 100 mm Trim. 1

341 EN 3489:2019 Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 ≤ Rm ≤ 750 MPa - Tubes for structures - 0,5 ≤ a ≤ 5 mm Trim. 1

20 din 250

342 EN 4604-007:2019 Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial, 50 ohms, 200 °C, type WN - Product standard Trim. 1

343 EN 4681-001:2019 Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 001: Technical specification Trim. 1

344 EN 4840-102:2019 Aerospace series - Heat shrinkable moulded shapes - Part 102: Elastomeric, semi-rigid, temperature range -75 to 150 °C - Product Standard Trim. 1

345 EN ISO 5010:2019Earth-moving machinery - Wheeled machines - Steering requirements (ISO 5010:2019) Trim. 1

346 EN ISO 6504-3:2019 Paints and varnishes - Determination of hiding power - Part 3: Determination of hiding power of paints for masonry, concrete and interior use (ISO 6504-3:2019) Trim. 1

347 EN ISO 6892-1:2019 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019) Trim. 1

348 EN ISO 8654:2018/A1:2019 Jewellery - Colours of gold alloys - Definition, range of colours and designation - Amendment 1 (ISO 8654:2018/Amd 1:2019) Trim. 1

349 EN ISO 9863-1:2016/A1:2019 Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers - Amendment 1 (ISO 9863-1:2016/Amd 1:2019) Trim. 1

350 EN ISO 10070:2019Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO 10070:2019) Trim. 1

351 EN 10216-2:2013+A1:2019 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties Trim. 1

352 EN ISO 10722:2019Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) (ISO 10722:2019) Trim. 1

353 EN ISO 10961:2019 Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2019) Trim. 1

354 EN ISO 11117:2019 Gas cylinders - Valve protection caps and guards - Design, construction and tests (ISO 11117:2019) Trim. 1

355 EN 12301:2019 Plastics and rubber machines - Calenders - Safety requirements Trim. 1

356 EN 12640:2019 Intermodal loading units and commercial vehicles - Lashing points for cargo securing - Minimum requirements and testing Trim. 1

357 EN 12641-1:2019 Intermodal loading units and commercial vehicles - Tarpaulins - Part 1: Minimum requirements Trim. 1

358 EN 12641-2:2019 Intermodal loading units and commercial vehicles - Tarpaulins - Part 2: Minimum requirements for curtainsiders Trim. 1

359 EN ISO 12813:2019 Electronic fee collection - Compliance check communication for autonomous systems (ISO 12813:2019) Trim. 1

360 EN 12845:2015+A1:2019 Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance Trim. 1

21 din 250

361 EN 12965:2019 Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety Trim. 1

362 EN 13031-1:2019 Greenhouses - Design and construction - Part 1: Commercial production greenhouses Trim. 1

363 EN 13053:2019 Ventilation for buildings - Air handling units - Rating and performance for units, components and sections Trim. 1

364 EN ISO 13426-1:2019 Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2019) Trim. 1

365 CEN/TS 13476-4:2019 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Assessment of conformity Trim. 1

366 EN ISO 13938-1:2019 Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:2019) Trim. 1

367 EN ISO 13938-2:2019 Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:2019) Trim. 1

368 EN 14908-7:2019 Open communication in building automation, controls and building management - Control Network Protocol - Part 7: Communication via internet protocols Trim. 1

369 EN ISO 14971:2019Medical devices - Application of risk management to medical devices (ISO 14971:2019) Trim. 1

370 EN 15202:2019 LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections Trim. 1

371 EN 15597-2:2019 Winter maintenance equipment - Spreading and spraying machines - Part 2: Requirements for distribution and their test Trim. 1

372 EN ISO 16140-6:2019Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019) Trim. 1

373 EN 16234-1:2019 e-Competence Framework (e-CF) - A common European Framework for ICT Professionals in all sectors - Part 1: Framework Trim. 1

374 EN ISO 16929:2019 Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test (ISO 16929:2019) Trim. 1

375 CWA 17349:2019Engineering materials - Electronic data interchange - Mechanical test data Trim. 1

22 din 250

376 CWA 17486:2019Verification of performance levels of Galileo Enabled mass-market receivers Trim. 1

377 CWA 17493:2019 Journalism Trust Initiative Trim. 1

378 EN ISO 19107:2019 Geographic information - Spatial schema (ISO 19107:2019) Trim. 1

379 EN ISO 19116:2019 Geographic information - Positioning services (ISO 19116:2019) Trim. 1

380 EN ISO 19577:2019 Footwear - Critical substances potentially present in footwear and footwear components - Determination of Nitrosamines (ISO 19577:2019) Trim. 1

381 EN ISO 20706-1:2019 Textiles - Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends - Part 1: Fibre identification using microscopy methods (ISO 20706-1:2019) Trim. 1

382 EN ISO 21268-4:2019Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials - Part 4: Influence of pH on leaching with initial acid/base addition (ISO 21268-4:2019) Trim. 1

383 EN ISO 28927-1:2019 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2019) Trim. 1

384 EN ISO 29988-1:2019 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 29988-1:2019) Trim. 1

385 EN ISO/ASTM 52907:2019 Additive manufacturing - Feedstock materials - Methods to characterize metal powders (ISO/ASTM 52907:2019) Trim. 1

386EN ISO 80079-36:2016/AC:2019

Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements - Technical Corrigendum 1 (ISO 80079-36:2016/Cor 1:2019) Trim. 1

387 EN 50083-2-4:2019Cable networks for television signals, sound signals and interactive services - Part 2-4: Interference Mitigation Filters operating in the 700 MHz and 800 MHz bands for DTT reception Trim. 1

388 EN 50325-1:2019 Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 1: General requirements Trim. 1

389 EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods Trim. 1

390 CLC/TS 50703-1:2019 Lightning Protection System Components (LPSC) - Part 1: Testing requirements for metal sheets’ joints used in LPS Trim. 1

23 din 250

391 EN IEC 60077-3:2019 Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for DC circuit-breakers Trim. 1

392 EN IEC 60077-4:2019 Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers Trim. 1

393 EN IEC 60077-5:2019 Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses Trim. 1

394 EN IEC 60079-19:2019Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation Trim. 1

395 EN IEC 60309-5:2019Plugs, socket-outlets and couplers for industrial purposes - Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC) Trim. 1

396 EN IEC 60317-27-3:2019 Specifications for particular types of winding wires - Part 27-3: Paper tape covered rectangular copper wire Trim. 1

397 EN 60335-2-5:2015/A11:2019 Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers Trim. 1

398 EN 60335-2-35:2016/A1:2019 Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters Trim. 1

399 EN 60335-2-47:2003/A2:2019 Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans Trim. 1

400 EN 60335-2-48:2003/A2:2019 Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters Trim. 1

401 EN 60335-2-49:2003/A2:2019 Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm Trim. 1

402EN 60335-2-61:2003/A11:2019 Household and similar electrical appliances - Safety - Part 2-61: Particular requirements

for thermal-storage room heaters Trim. 1

403 EN IEC 60512-28-100:2019 Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g Trim. 1

404 EN IEC 60793-2:2019 Optical fibres - Part 2: Product specifications - General Trim. 1

24 din 250

405 EN IEC 60904-4:2019 Photovoltaic devices - Part 4: Reference solar devices - Procedures for establishing calibration traceability Trim. 1

406 EN IEC 61300-2-54:2019 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-54: Tests - Corrosive atmosphere (mixed gas) Trim. 1

407EN 61400-12-1:2017/AC:2019-12 Wind energy generation systems - Part 12-1: Power performance measurement of

electricity producing wind turbines Trim. 1

408 EN IEC 61535:2019Installation couplers intended for permanent connection in fixed installations Trim. 1

409 EN 61784-3-12:2010/A1:2019 Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12 Trim. 1

410 EN IEC 61857-32:2019 Electrical insulation systems - Procedures for thermal evaluation - Part 32: Multifactor evaluation with increased factors during diagnostic testing Trim. 1

411 EN 62026-2:2013/A1:2019 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) Trim. 1

412 EN 62026-3:2015/AC:2019-12 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet Trim. 1

413EN IEC 62386-332:2018/AC:2019-12 Digital addressable lighting interface - Part 332: Particular requirements - Input devices -

Feedback Trim. 1

414 EN IEC 62430:2019Environmentally conscious design (ECD) - Principles, requirements and guidance Trim. 1

415 EN IEC 62878-1:2019 Device embedding assembly technology - Part 1: Generic specification for device embedded substrates Trim. 1

416 EN IEC 62885-9:2019 Surface cleaning appliances - Part 9: Floor treatment machines with or without traction drive, for commercial use - Methods for measuring the performance Trim. 1

417 EN IEC 63006:2019 Wireless power transfer (WPT) - Glossary of terms Trim. 1

418 EN IEC 63077:2019 Good refurbishment practices for medical imaging equipment Trim. 1

419 EN 301549:2019 Accessibility requirements for ICT products and services Trim. 1 SM EN 301549:2018 30.06.2020

25 din 250

420 CWA 17377:2019 Design and Construction Codes for Gen II to IV nuclear facilities (pilot case for process for evolution of AFCEN codes) Trim. 1

421 EN 60061-3:1993/A56:2019 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges Trim. 1

422 EN ISO 17700:2019 Footwear - Test methods for upper components and insocks - Colour fastness to rubbing and bleeding (ISO 17700:2019) Trim. 1

423 CWA 17379:2019General guideline on real drive test methodology for compiling comparable emission data Trim. 1

424 CEN Guide 414:2017Safety of machinery - Rules for the drafting and presentation of safety standards Trim. 1

425 EN 50341-2-15:2019 Overhead electrical lines exceeding AC 1 kV - Part 2-15: National Normative Aspects (NNAs) for the Netherlands (based on EN 50341-1:2012) Trim. 1

426EN IEC 60076-11:2018/AC:2019-06 Power transformers - Part 11: Dry-type transformers Trim. 1

427 CLC/TS 50238-3:2019 Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle counters Trim. 1

428EN IEC 60964:2019/AC:2019-08 Nuclear power plants - Control rooms - Design Trim. 1

429 CEN/TS 17329-2:2019 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 2: Collaborative study Trim. 1

430HD 60364-4-41:2017/A12:2019 Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against

electric shock Trim. 1

431 EN 50551-1:2019 Simplex and duplex cables for use in terminated cable assemblies - Part 1: Blank Detail Specification and minimum requirements Trim. 1

432 EN 17267:2019 Energy measurement and monitoring plan - Design and implementation - Principles for energy data collection Trim. 1

433 CEN/TS 17176-3:2019Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings Trim. 1

434 EN ISO 20361:2019 Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2019) Trim. 1

26 din 250

435 CEN/TR 10367:2019 Alloyed steels - Determination of chromium content - Inductively coupled plasma optical emission spectrometric method Trim. 1

436 CEN/TS 16769:2019 LPG equipment and accessories - Terminology Trim. 1

437 EN 50591:2019Railway Applications - Rolling Stock - Specification and verification of energy consumption Trim. 1

438 CEN/TR 17376:2019 Textiles - Safety of children's clothing - Guidance on the use of EN 14682:2014 Cords and drawstrings on children's clothing - Specifications Trim. 1

439 CLC/TR 62453-51-32:2019 Field device tool (FDT) interface specification - Part 51-32: Communication implementation for common object model - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 Trim. 1

440 CLC IEC/TR 62453-52-90:2019 Field device tool (FDT) interface specification - Part 52-90: Communication implementation for common language infrastructure - IEC 61784 CPF 9 Trim. 1

441 EN IEC 60276:2019 Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature Trim. 1

442 CEN/TR 17309:2019 Test methods for environmental characterization of solid matrices - Guide to flash point testing Trim. 1

443 EN IEC 81346-2:2019Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 2: Classification of objects and codes for classes Trim. 1

444 EN 215:2019 Thermostatic radiator valves - Requirements and test methods Trim. 1

445 EN ISO 3252:2019 Powder metallurgy - Vocabulary (ISO 3252:2019) Trim. 1

446 EN 60068-2-67:1996/A1:2019 Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components Trim. 1

447 EN ISO 16136:2006/A1:2019 Industrial valves - Butterfly valves of thermoplastics materials - Amendment 1 (ISO 16136:2006/Amd 1:2019) Trim. 1

448CLC IEC/TR 62453-51-150:2019 Field device tool (FDT) interface specification - Part 51-150: Communication

implementation for common object model - IEC 61784 CPF 15 Trim. 1

449 EN 60335-1:2012/A14:2019Household and similar electrical appliances - Safety - Part 1: General requirements Trim. 1

27 din 250

450 EN IEC 61810-10:2019 Electromechanical elementary relays - Part 10: Additional functional aspects and safety requirements for high-capacity relays Trim. 1

451 EN IEC 62909-2:2019 Bi-directional grid-connected power converters - Part 2: Interface of GCPC and distributed energy resources Trim. 1

452 EN 60704-2-3:2019/A11:2019 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers Trim. 1

453 EN 10025-6:2019 Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition Trim. 1

454 EN 60335-2-13:2010/A1:2019 Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances Trim. 1

455 EN ISO 15995:2019 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2019) Trim. 1

456 EN 17294:2019 Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD) Trim. 1

457 EN 856:2015+AC:2019 Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification Trim. 1

458 CEN/TS 17303:2019 Foodstuffs - DNA barcoding of fish and fish products using defined mitochondrial cytochrome b and cytochrome c oxidase I gene segments Trim. 1

459 EN IEC 61500:2019 Nuclear power plants - Instrumentation and control systems important to safety – Data communication in systems performing category A functions Trim. 1

460 EN 62808:2016/A1:2019 Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices Trim. 1

461 EN ISO 17059:2019 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) (ISO 17059:2019) Trim. 1

462 EN 62752:2016/AC:2019-03 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPDs) Trim. 1

463 CEN/TS 17287:2019 Requirements and test methods for electronic cigarette devices Trim. 1

28 din 250

464EN IEC 62443-2-4:2019/A1:2019 Security for industrial automation and control systems - Part 2-4: Security program

requirements for IACS service providers Trim. 1

465 EN 15182-3:2019Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Hand-held branchpipes for fire service use - Part 3: Smooth bore jet and/or one fixed spray jet angle branchpipes PN 16 Trim. 1

466 EN 15182-4:2019 Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40 Trim. 1

467 EN 61121:2013/A11:2019 Tumble dryers for household use - Methods for measuring the performance Trim. 1

468 CEN/TR 16829:2016+AC:2019Fire and explosion prevention and protection for bucket elevators Trim. 1

469 CEN ISO/TS 21003-7:2019 Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity (ISO/TS 21003-7:2019) Trim. 1

470 EN IEC 61158-6-10:2019 Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements Trim. 1

471 EN 927-3:2019 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test Trim. 1

472 EN IEC 60480:2019 Specifications for the re-use of sulphur hexafluoride (SF6) and its mixtures in electrical equipment Trim. 1

473 EN IEC 60539-2:2019 Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors Trim. 1

474 EN 927-13:2019 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 13: Assessment of resistance to impact of a coating on a wooden substrate Trim. 1

475 CWA 17369:2019Authenticity and fraud in the feed and food chain - Concepts, terms, and definitions Trim. 1

476 EN 60320-1:2015/AC:2019-06 Appliance couplers for household and similar general purposes - Part 1: General requirements Trim. 1

477 CEN/TS 17062:2019 Foods of plant origin - Multimethod for the determination of pesticide residues in vegetable oils by LC-MS/MS (QuOil) Trim. 1

478 EN 14012:2019 Postal services - Quality of service - Complaints handling principles Trim. 1

29 din 250

479 EN 60675:1995/A11:2019Household electric direct-acting room heaters - Methods for measuring performance Trim. 1

480 EN IEC 60076-22-3:2019 Power transformers - Part 22-3: Power transformer and reactor fittings - Insulating liquid to air heat exchangers Trim. 1

481 EN ISO 20074:2019 Petroleum and natural gas industry - Pipeline transportation systems - Geological hazards risk management for onshore pipeline (ISO 20074:2019) Trim. 1

482 EN 60317-20:2014/A1:2019 Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155 Trim. 1

483EN 60061-1:1993/A58:2018/AC:2019-04 Lamp caps and holders together with gauges for the control of interchangeability and

safety - Part 1: Lamps Caps Trim. 1

484 EN 2465:2019 Aerospace series - Steel X2CrNi18-9 (1.4307) - Softened - 450 MPa ≤ Rm ≤ 680 MPa - Bars for machining - 4 mm ≤ De ≤ 100 mm Trim. 1

485 EN ISO/ASTM 52911-1:2019 Additive manufacturing - Design - Part 1: Laser-based powder bed fusion of metals (ISO/ASTM 52911-1:2019) Trim. 1

486 CEN/TS 17307:2019Material derived from End-of-Life tyres - Granulates and powders - Elastomers identification: Gas-chromatography and mass-spectrometric detection of pyrolysis products in solution Trim. 1

487 EN 419231:2019 Protection profile for trustworthy systems supporting time stamping Trim. 1

488 EN 15017:2019 Funeral Services - Requirements Trim. 1

489 EN 13098:2019 Workplace exposure - Measurement of airborne microorganisms and microbial compounds - General requirements Trim. 1

490 EN 13494:2019 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material Trim. 1

491 EN 3155-027:2019 Aerospace series - Electrical contacts used in elements of connection - Part 027: Contacts, electrical, female, type A, crimp, class R - Product standard Trim. 1

492 CEN/TS 17297-2:2019 Intelligent transport systems - Location Referencing Harmonisation for Urban-ITS - Part 2: Transformation methods Trim. 1

493 EN 50117-1:2019 Coaxial cables - Part 1: Generic specification Trim. 1

30 din 250

494 EN ISO 11393-2:2019 Protective clothing for users of hand-held chainsaws - Part 2: Performance requirements and test methods for leg protectors (ISO 11393-2:2018) Trim. 1

495 CEN/TR 15654-3:2019 Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 3: Approval and verification of on track measurement sites for vehicles in service Trim. 1

496 CEN/TS 17154-2:2019 Electronic fee collection - Evaluation of implementation for conformity to CEN/TS 16986 - Part 2: Abstract test suite Trim. 1

497 EN 1276:2019Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1) Trim. 1

498 EN ISO 19906:2019Petroleum and natural gas industries - Arctic offshore structures (ISO 19906:2019) Trim. 1

499 EN IEC 61158-5-10:2019 Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer service definition - Type 10 elements Trim. 1

500 EN IEC 61158-5-25:2019 Industrial communication networks - Fieldbus specifications - Part 5-25: Application layer service definition - Type 25 elements Trim. 1

501 EN IEC 61158-4-19:2019 Industrial communication networks - Fieldbus specifications - Part 4 -19: Data-link layer protocol specification - Type 19 elements Trim. 1

502 EN IEC 61158-3-19:2019 Industrial communication networks - Fieldbus specifications - Part 3-19: Data-link layer service definition - Type 19 elements Trim. 1

503 CEN/TS 17241:2019 Intelligent transport systems - Traffic management systems - Status, fault and quality requirements Trim. 1

504 EN IEC 61158-6-19:2019 Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specification - Type 19 elements Trim. 1

505 CEN/TS 17249-5:2019 Intelligent transport systems - eSafety - Part 5: eCall for UNECE Category L1 and L3 powered two-wheeled vehicles Trim. 1

506 EN ISO 5362:2019 Anaesthetic reservoir bags (ISO 5362:2006) Trim. 1

507 EN 14683:2019+AC:2019 Medical face masks - Requirements and test methods Trim. 1

508 EN IEC 31010:2019 Risk management - Risk assessment techniques Trim. 1

31 din 250

509 EN 4612-003:2019Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 003: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Single extruded wall for open applications, with jacket without screen - UV laser printable - Product standard Trim. 1

510 CEN/TS 17312:2019Intelligent transport systems - eSafety - eCall via satellite Trim. 1

511 EN ISO 787-13:2019 General methods of test for pigments and extenders - Part 13: Determination of water-soluble sulfates, chlorides and nitrates (ISO 787-13:2019) Trim. 1

512 EN ISO 787-15:2019 General methods of test for pigments and extenders - Part 15: Comparison of resistance to light of coloured pigments of similar types (ISO 787-15:2019) Trim. 1

513 EN 4612-007:2019

p , , g p p , g y XLETFE Family - Jacketed or screened and jacketed - Part 007: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Single extruded wall for open applications, with jacket without screen - UV laser printable - Product standard Trim. 1

514 EN 4612-008:2019

p g p p g y XLETFE Family - Jacketed or screened and jacketed - Part 008: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Single extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard Trim. 1

515 EN IEC 63093-4:2019 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores Trim. 1

516 EN ISO 3269:2019Fasteners - Acceptance inspection (ISO 3269:2019) Trim. 1

517 CEN/TS 17286:2019 Statio