play frames & combination implements - sisis · 2 certificate of conformity play frames &...

PLAY FRAMES &

COMBINATION IMPLEMENTS INSTRUCTION MANUAL

SP20046_REV0 DECEMBER 2017

2

CERTIFICATE OF CONFORMITY

PLAY FRAMES & COMBINATION IMPLEMENTS CN Code: 84322990

Manufacturer:- Howardson Ltd, Howardson Works, Kirk Langley, Derby, DE6 4NJ. UK

Owner of Technical Document:- Mr I.D. Howard, Howardson Ltd, Howardson Works Kirk Langley, Derby, DE6 4NJ, UK

The reliability and quality of performance of PLAY FRAMES & COMBINATION IMPLEMENTS depends upon some simple care maintenance carried out regularly. This manual has been prepared to allow the user to carry out all such work.

It is advisable to read the instructions carefully. Proper care and attention will enable the machines to give a continuous, satisfactory, and reliable service. Failure to carry out regular lubrication and maintenance as outlined in this manual may render any guarantee or warranty invalid.

In the case of any difficulty, or if further information or advice is required, our Service Department is always at your call. In the interests of speed and accuracy of information please quote the serial numbers of the machine and engine when making enquiries.

For the machine, this is to be found on a plate attached to the side frame. We suggest you write the numbers on the front page of this book.

INTRODUCTION

SERIAL NUMBERS

Ian Howard

Managing Director

MACHINE SERIAL NUMBER

NOTE:- MAKE A NOTE OF THE SERIAL NUMBER OF YOUR MACHINE AND ALWAYS

QUOTE IT IN ANY COMMUNICATION WITH PERSONNEL AT SISIS.


3

CONTENTS Page

Declaration of Conformity....................................................................................................................................................... 2 Serial Numbers....................................................................................................................................................................... 2 Introduction............................................................................................................................................................................. 2 Technical Data........................................................................................................................................................................ 3 Important Safety Instructions.................................................................................................................................................. 4 Machine Description.............................................................................................................................................................. 5 Operating instructions………................................................................................................................................................6-7 Parts Listings...............................................................................................................................................................P0 – P17

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:- READ THE INSTRUCTIONS. We want you to obtain the best performances from this

machine. If you have any difficulty in carrying out the following instructions please contact

your local SISIS dealer.

NEVER

• Carry out adjustments whilst the machine is running.• Allow any unauthorised person to handle machines in any way at any time.• Lift or carry a machine whilst any parts are moving

ALWAYS

• Read the operating instructions carefully and understand the controls before commencing work.• Be extra careful when using petrol or diesel fuel. Danger – no smoking or naked lights.• Before starting work always visually check machine for damage or wear to parts.• Look behind before starting to reverse and watch out for children or pedestrians.• Switch off the power before making adjustments or repairs and never lift or carry a machine whilst any parts are

moving.


IMPLEMENTS

MODEL SIZE WIDTH LENGTH HEIGHT WEIGHT

FLEXICOMB

FS1163 (1.3m) 1416mm 140mm 449mm 24.4Kg

FS1134 (1.8m) 1893mm 140mm 449mm 29.6Kg

FS1277 (2.4m) 2493mm 140mm 449mm 36.1Kg

INTERMEDIATE RAKE

FS1270 (1.2m) 1252mm 190mm 329mm 20.9Kg

FS0759 (1.8m) 1860mm 190mm 329mm 30.5Kg

FS1268 (2.4m) 2480mm 190mm 329mm 40.4Kg

TILTH RAKE

FS1269 (1.2m) 1252mm 190mm 329mm 21.5Kg

FS0760 (1.8m) 1860mm 190mm 329mm 31.3Kg

FS1266 (2.4m) 2480mm 190mm 329mm 41.7Kg

SPRING TINE GROOMING RAKE

FS1148 (1.2m) 1232mm 131mm 458mm 20.3Kg

FS0761 (1.8m) 1651mm 131mm 458mm 27Kg

FS0771 (2.4m) 2211mm 131mm 458mm 35.6Kg

FINE GROOMING RAKE

FS1272 (1.2m) 1229mm 131mm 458mm 17.9Kg

FS1075 (1.8m) 1839mm 131mm 458mm 26.1Kg

FS1076 (2.4m) 2409mm 131mm 458mm 34Kg

ZIG ZAG BRUSH FS0869 B/Y (1.8m) 1919mm 479mm 346mm 40.5Kg

FS0516 B/Y (2.4m) 2399mm 479mm 346mm 51Kg

STRAIGHT BRUSH

FS0865 B/Y (1.2m) 1255mm 140mm 345mm 17Kg

FS0765 B/Y (1.8m) 1853mm 140mm 345mm 25.7Kg

FS0775 B/Y (2.4m) 2443mm 140mm 345mm 31Kg

ROLASPIKE

FS1271 (1.2m) 1356mm 344mm 483mm 39.3Kg

FS1169 (1.8m) 1928mm 344mm 483mm 56.1Kg

FS1267 (2.4m) 2500mm 344mm 483mm 73Kg

DEEP SLITTER FS1162 1471mm 972mm 722mm 108.5Kg

ROLLER

FS0863 (1.2m) 1327mm 178mm 372mm 53Kg

FS0763 (1.8m) 1939mm 178mm 372mm 74.5Kg

FS0773 (2.4m) 2515mm 213mm 326mm 102Kg

GRADER PLATE FS1110 (2m) 2000mm 733mm 442mm 144Kg

FS1109 (2.4m) 2400mm 733mm 442mm 1662Kg

LEVELLING LUTE FS0762 (1.8m) 1750mm 275mm 376mm 42Kg

FS0772 (2.4m) 2310mm 275mm 376mm 48Kg

SPIKER SLITTER

FS0561 (1.2m) 1372mm 271mm 450mm 49Kg

FS0764 (1.8m) 1914mm 271mm 450mm 65Kg

FS0774 (2.4m) 2470mm 271mm 450mm 81Kg

4

TECHNICAL DATA PLAY FRAMES

MODEL WIDTH LENGTH HEIGHT WEIGHT

SINGLEPLAY – FS0870 1126mm 313mm 581mm 24.54Kg

TWINPLAY – FS1237 1126mm 573mm 581mm 32.8Kg

TRI-PLAY – FS1236 1126mm 937mm 581mm 41.77Kg

QUADRAPLAY – FS0758 1382mm 1120mm 622mm 108kg


5

OPERATING INSTRUCTIONS PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING THESE PRODUCTS

We want you to obtain the best performance from this set of machines, If you have any difficulties after reading these operating instructions, please contact us or your local SISIS Territory Manager or SISIS Dealer.

PLAYFRAMES

Connection to the tractor

All four playframes (Singleplay, Twinplay, Tri-play and Quadraplay) are designed to mount to a tractor using the three point linkage. When fitting a Playframe, ensure the implement is parallel with the ground. Also ensure the implement can be lifted high enough to clear the ground in transportation, particularly in undulating conditions.

Safety

Always: - Read the operating instructions carefully and understand the controls before commencing work.- Before starting work visually check machines for damage or wear to working parts such as blades or tines.- Use safety guards and make sure they are in the correct position. They are supplied for your safety.- Watch out for children or pedestrians. Always look behind before starting to reverse.- Switch of power before making adjustments or repairs and never lift or carry a machine whilst any parts are moving.

Do Not: - Allow any unauthorised person to handle the machine in any way at anytime.- Lower the implements too far as this could damage the product or the surface being treated.- Raise or lower the implements whilst the tractor is in motion.- Turn the tractor whilst the play frame is still in contact with the ground.

Raising and Lowering Implements

Unbolt, raise/lower and re-bolt

Unbolt, raise/lower and

re-bolt

Singleplay Tri-play Twinplay

Remove and replace after

raising the jack

Quadraplay

All the combination frames can be raised off the floor using the tractors hydraulic lift, for the Single play this is the only method for lifting the frame, for the Twin and Tri-play the 2nd and 3rd implements can be raised/lowered by unbolting the implement attachment bars and re-bolting at the desired height as shown above.

The Quadraplay can be lifted and set at the right height in 3 different ways:

1) Using the tractors hydraulic lift.

2) Raising/lowering the jacks on the side of theframe by unbolting and re-bolting. (each jackmust be held in position by 4 bolts)

3) Winding the jack handles to make theimplements lift or fall (wind all adjacent jacks atthe same time)


Direction of Travel

Stand Legs

These are only for supporting the Rolaspike when its not in use and not attached to any of the playframes. They help to protect the tines by lifting them off the ground and should be removed when in use.

6

OPERATING INSTRUCTIONS

Implement Connection to the frame.

When connecting implements to any of the various play frames. Always lower the frame closer to the ground using the tractor hydraulics.

Remove the x4 M16 implement bolts using a pair of spanners.

Lift the implement so that the implement and frame holes align.

Re-insert x4 M16 bolts and tighten to secure the implement.

Take extra care when removing implements.

Diagrams to show correct implement orientation

Implement Height

Each implement will need the height to be set individually to ensure it interacts with the ground in the correct manor. The heights can be set by turning the jack handles above each implement. The Spiker Slitter and the Rolaspike sit lower to penetrate the ground.

Approximate ground level for each implement


7

OPERATING INSTRUCTIONS

Flexicomb Brush Adjustment

The Flexicomb can be adjusted to change theattributes of the brush to apply a different processto the surface.

The brush length can be shortened achieve astiffer and more aggressive action

The brush can also be lengthened to achieve amore delicate action.

The length is changed by turning the adjusterhandles in unison to raise and lower the guide bar,as shown on the right.


NOTES


PLAY FRAMES AND COMBINATION IMPLEMENTS - PARTS BOOK

P0


3

2

1

2

1

ITEM NO. PART NUMBER DESCRIPTION QTY.1 D8326_REV1 PIN LINCH 7/16" 22 F20327_REV0 IMPLEMENT MOUNTING PIN 23 F32146_REV3 IMP ATT FRAME 1

SINGLEPLAY - FS0870

P1.01


6

3

5

7 1 1 9

210108

4

3

** REF - P1.01 F32146

**

ITEM NO. PART NUMBER DESCRIPTION Default/QTY.1 E1-1080_REV0 WASHER M16 FORM A 42 E1-1130_REV0 HEX BOLT M10 X 65 43 F32163_REV8 IMPLEMENT ATTACHMENT BAR 24 F37390_REV3 RH HEIGHT ARM 15 F37391_REV3 LH HEIGHT ARM 16 FS0870_REV0 SINGLE PLAY FRAME (FS0870) 17 SP01116_REV0 HEX BOLT M16 X 75 28 SP02008_REV0 NUT M10 NYLOC (T) 49 SP02028_REV0 NUT M16 NYLOC (T) 2

10 SP03011_REV0 WASHER M10 FORM A 8

TWINPLAY - FS1237

P2.01


6

4

53

7 1 1 9

210108

2 10 10 8

** REF - P1.01 F32146

**

ITEM NO. PART NUMBER DESCRIPTION QTY.1 E1-1080_REV0 WASHER M16 FORM A 82 E1-1130_REV0 HEX BOLT M10 X 65 43 F32163_REV8 IMPLEMENT ATTACHMENT BAR 44 F36400_REV3 LH HEIGHT ADJ ARM 15 F36401_REV3 RH HEIGHT ADJUSTING ARM 16 FS0870_REV0 SINGLE PLAY FRAME (FS0870) 17 SP01116_REV0 HEX BOLT M16 X 75 48 SP02008_REV0 NUT M10 NYLOC (T) 49 SP02028_REV0 NUT M16 NYLOC (T) 4


TRI-PLAY - FS1236

P3.01


2

1

5

3

1

7 11 11 9

3

4

6 10 8

3

7 11 11 9

ITEM NO. PART NUMBER DESCRIPTION QTY.1 D8326_REV1 PIN LINCH 7/16" 112 D8617_REV1 TOP LINK PIN 3/4" 13 F30971_REV1 PARKING JACK 84 F30972_REV3 MAIN FRAME ASM 15 F30981_REV1 QUADRAPLAY BASE BOARD 16 SP01038_REV0 COACH BOLT M8 X 30 (8.8 HT) 47 SP01065_REV0 HEX SET SCREW M12 X 30 328 SP02006_REV0 NUT M8 NYLOC (T) 49 SP02010_REV0 NUT M12 NYLOC (T) 32

10 SP03008_REV0 WASHER M8 FORM A 411 SP03012_REV0 WASHER M12 FORM A 64

QUADRAPLAY - FS0758

P4.01


13 106 8 8 17

14

12 15 7 195

4

12

91818 11

25

112016 113

ITEM NO. PART NUMBER DESCRIPTION QTY.1 400298_REV0 PLASTIC GROMMET 762 400510_REV1 SCREW BLOCK ASSY 23 BA1009_REV1 BUSH AL1218 - 12 44 D1917_REV0 3/16" X 1" SPLIT PIN 25 D1947_REV1 GREASE NIPPLE M6 26 SP01108_REV0 HEX BOLT M16 X 90 47 E1-1065_REV0 SPRING WASHER M12 SQUARE SECTION 388 E1-1080_REV0 WASHER M16 FORM A 89 E1-1116_REV0 HEX BOLT M8 X 70 8

10 F37145_REV4 BRISTLE ASSEMBLY 3811 F37154_REV2 FLEXICOMB ADJUSTER LOWER BRACKET 212 F37155-A_REV0 FLEXICOMB 1.3M ADJUSTER 213 F37789-1_REV2 FLEXICOMB 1.3M TOP FRAME 114 F37789-2_REV2 FLEXICOMB 1.3M BOTTOM FRAME 115 SP01059_REV0 HEX SET SCREW M12 X 25 3816 SP02006_REV0 NUT M8 NYLOC (T) 817 SP02028_REV0 NUT M16 NYLOC (T) 418 SP03008_REV0 WASHER M8 FORM A 1619 SP03012_REV0 WASHER M12 FORM A 3820 SP03017_REV0 WASHER M12 FORM C 421 F37152_REV1 DECAL 122 F37153_REV1 DECAL 2

ITEM NO. PART NUMBER DESCRIPTION Default/QTY.1 400298_REV0 PLASTIC GROMMET 1042 400510_REV1 SCREW BLOCK ASSY 23 BA1009_REV1 BUSH AL1218 - 12 44 D1917_REV0 3/16" X 1" SPLIT PIN 25 D1947_REV1 GREASE NIPPLE M6 26 SP01108_REV0 HEX BOLT M16 X 90 47 E1-1065_REV0 SPRING WASHER M12 SQUARE SECTION 528 E1-1080_REV0 WASHER M16 FORM A 89 E1-1116_REV0 HEX BOLT M8 X 70 8

10 F37145_REV4 BRISTLE ASSEMBLY 5211 F37154_REV2 FLEXICOMB ADJUSTER LOWER BRACKET 212 F37155-A_REV0 FLEXICOMB 1.3M ADJUSTER 213 F37614-1_REV4 FLEXICOMB 1.8M TOP FRAME 114 F37614-2_REV4 FLEXICOMB 1.8M BOTTOM FRAME 115 SP01059_REV0 HEX SET SCREW M12 X 25 5216 SP02006_REV0 NUT M8 NYLOC (T) 817 SP03008_REV0 WASHER M8 FORM A 1618 SP03012_REV0 WASHER M12 FORM A 5219 SP03017_REV0 WASHER M12 FORM C 420 E1-1231_REV0 M16 NYLOC 421 F37152_REV1 DECAL 122 F37153_REV1 DECAL 2

ITEM NO. PART NUMBER DESCRIPTION QTY.1 400298_REV0 PLASTIC GROMMET 1382 400510_REV1 SCREW BLOCK ASSY 23 403210_REV0 FLEXICOMB 2.4M BOTTOM FRAME 14 403212_REV0 FLEXICOMB 2.4M TOP FRAME 15 BA1009_REV1 BUSH AL1218 - 12 46 D1917_REV0 3/16" X 1" SPLIT PIN 27 D1947_REV1 GREASE NIPPLE M6 28 SP01108_REV0 HEX BOLT M16 X 90 49 E1-1065_REV0 SPRING WASHER M12 SQUARE SECTION 69

10 E1-1080_REV0 WASHER M16 FORM A 811 E1-1116_REV0 HEX BOLT M8 X 70 812 F37145_REV4 BRISTLE ASSEMBLY 6913 F37154_REV2 FLEXICOMB ADJUSTER LOWER BRACKET 214 F37155-A_REV0 FLEXICOMB 1.3M ADJUSTER 215 SP01059_REV0 HEX SET SCREW M12 X 25 6916 SP02006_REV0 NUT M8 NYLOC (T) 1017 SP02028_REV0 NUT M16 NYLOC (T) 418 SP03008_REV0 WASHER M8 FORM A 1619 SP03012_REV0 WASHER M12 FORM A 6920 SP03017_REV0 WASHER M12 FORM C 421 F37152_REV1 DECAL 122 F37153_REV1 DECAL 2

FLEXICOMB - FS1163 1.3m, FS1134 1.8m, FS1277 2.4m

P5.01


110 7 7 8 11 16 14 1

13 15

6

3

2 4

6

5155 9 14 14 12

ITEM NO. PART NUMBER DESCRIPTION QTY.1 403060_REV0 RAKE SUPPORT 1200 12 403062_REV0 RAKE TOP FRAME (1200) 13 403064_REV0 BOTTOM FRAME ASSY (1200) 14 403067_REV0 TINE TUBE (1200) 15 403069_REV0 TUBE STAY ROD ASSY (1200) 16 D3544_REV1 COILED TINE 247 E1-1080_REV0 WASHER M16 FORM A 88 E1-1231_REV0 M16 NYLOC 49 SP01034_REV0 HEX SET SCREW M10 X 20 2

10 SP01108_REV0 HEX BOLT M16 X 90 411 SP01124_REV0 HEX SET SCREW M10 X 45 412 SP02008_REV0 NUT M10 NYLOC (T) 213 SP02010_REV0 NUT M12 NYLOC (T) 114 SP03011_REV0 WASHER M10 FORM A 815 SP03012_REV0 WASHER M12 FORM A 216 SP03034_REV0 WASHER M10 SPRING LOCK 4

ITEM NO. PART NUMBER DESCRIPTION QTY.1 D3544_REV1 COILED TINE 382 D6549_REV1 TUBE STAY ROD ASSY 6' 13 D6550_REV1 TINE TUBE (1800) 14 D6551_REV1 BOTTOM FRAME ASSY 6' 15 E1-1080_REV0 WASHER M16 FORM A 86 E1-1231_REV0 M16 NYLOC 47 E1-6548_REV2 RAKE TOP FRAME 6' 18 F30973_REV1 RAKE SUPPORT 6' 19 SP01034_REV0 HEX SET SCREW M10 X 20 210 SP01108_REV0 HEX BOLT M16 X 90 411 SP01124_REV0 HEX SET SCREW M10 X 45 612 SP02008_REV0 NUT M10 NYLOC (T) 213 SP02010_REV0 NUT M12 NYLOC (T) 114 SP03011_REV0 WASHER M10 FORM A 1015 SP03012_REV0 WASHER M12 FORM A 216 SP03034_REV0 WASHER M10 SPRING LOCK 6

ITEM NO. PART NUMBER DESCRIPTION QTY.1 403062_REV0 RAKE TOP FRAME (1200) 22 403064_REV0 BOTTOM FRAME ASSY (1200) 23 403067_REV0 TINE TUBE (1200) 24 403071_REV0 TUBE STAY ROD ASSY (2400) 15 403073_REV0 RAKE SUPPORT (2400) 16 SP01108_REV0 HEX BOLT M16 X 90 47 D3544_REV1 COILED TINE 488 E1-1080_REV0 WASHER M16 FORM A 89 E1-1231_REV0 M16 NYLOC 410 SP01034_REV0 HEX SET SCREW M10 X 20 211 SP01105_REV0 HEX SET SCREW M10 X 30 112 SP01124_REV0 HEX SET SCREW M10 X 45 813 SP02008_REV0 NUT M10 NYLOC (T) 314 SP02010_REV0 NUT M12 NYLOC (T) 115 SP03011_REV0 WASHER M10 FORM A 1416 SP03012_REV0 WASHER M12 FORM A 217 SP03034_REV0 WASHER M10 SPRING LOCK 8

INTERMEDIATE RAKE - FS1270 1.2m, FS0759 1.8m, FS1268 2.4m

P6.01


111 16 14

10 6 6 8

2

7

413 15

111614

3

9 14

515155 1

14 12

ITEM NO. PART NUMBER DESCRIPTION QTY.1 403060_REV0 RAKE SUPPORT 1200 12 403062_REV0 RAKE TOP FRAME (1200) 13 403064_REV0 BOTTOM FRAME ASSY (1200) 14 403067_REV0 TINE TUBE (1200) 15 403069_REV0 TUBE STAY ROD ASSY (1200) 16 D2149_REV1 TILTH RAKE COILED TINE 167 E1-1080_REV0 WASHER M16 FORM A 88 E1-1231_REV0 M16 NYLOC 49 SP01034_REV0 HEX SET SCREW M10 X 20 210 SP01108_REV0 HEX BOLT M16 X 90 411 SP01124_REV0 HEX SET SCREW M10 X 45 412 SP02008_REV0 NUT M10 NYLOC (T) 213 SP02010_REV0 NUT M12 NYLOC (T) 114 SP03011_REV0 WASHER M10 FORM A 815 SP03012_REV0 WASHER M12 FORM A 216 SP03034_REV0 WASHER M10 SPRING LOCK 4

ITEM NO. PART NUMBER DESCRIPTION QTY.1 D2149_REV1 TILTH RAKE COILED TINE 242 D6549_REV1 TUBE STAY ROD ASSY 6' 13 D6550_REV1 TINE TUBE (1800) 14 D6551_REV1 BOTTOM FRAME ASSY 6' 15 E1-1080_REV0 WASHER M16 FORM A 86 E1-1231_REV0 M16 NYLOC 47 E1-6548_REV2 RAKE TOP FRAME 6' 18 F30973_REV1 RAKE SUPPORT 6' 19 SP01034_REV0 HEX SET SCREW M10 X 20 2

10 SP01108_REV0 HEX BOLT M16 X 90 411 SP01124_REV0 HEX SET SCREW M10 X 45 612 SP02008_REV0 NUT M10 NYLOC (T) 213 SP02010_REV0 NUT M12 NYLOC (T) 114 SP03011_REV0 WASHER M10 FORM A 1015 SP03012_REV0 WASHER M12 FORM A 216 SP03034_REV0 WASHER M10 SPRING LOCK 6

ITEM NO. PART NUMBER DESCRIPTION QTY.1 403062_REV0 RAKE TOP FRAME (1200) 22 403064_REV0 BOTTOM FRAME ASSY (1200) 23 403067_REV0 TINE TUBE (1200) 24 403071_REV0 TUBE STAY ROD ASSY (2400) 15 403073_REV0 RAKE SUPPORT (2400) 16 D2149_REV1 TILTH RAKE COILED TINE 327 E1-1080_REV0 WASHER M16 FORM A 88 E1-1231_REV0 M16 NYLOC 49 SP01034_REV0 HEX SET SCREW M10 X 20 2

10 SP01105_REV0 HEX SET SCREW M10 X 30 111 SP01108_REV0 HEX BOLT M16 X 90 412 SP01124_REV0 HEX SET SCREW M10 X 45 813 SP02008_REV0 NUT M10 NYLOC (T) 314 SP02010_REV0 NUT M12 NYLOC (T) 115 SP03011_REV0 WASHER M10 FORM A 1416 SP03012_REV0 WASHER M12 FORM A 217 SP03034_REV0 WASHER M10 SPRING LOCK 8

TILTH RAKE - FS1269 1.2m, FS0760 1.8m, FS1266 2.4m

P7.01


56 3 3 4 1 3 3 42

FS1148 - 1.2m

ITEM NO. PART NUMBER DESCRIPTION QTY.1 D1956_REV0 HEX BOLT M16 X 80 182 D7853_REV1 B.B.S. TINE (HEAVY) 183 E1-1080_REV0 WASHER M16 FORM A 444 E1-1231_REV0 M16 NYLOC 225 F31553_REV1 RAKE BAR W.A. 35CRS (4') 16 SP01108_REV0 HEX BOLT M16 X 90 4

FS0761 - 1.8m

ITEM NO. PART NUMBER DESCRIPTION QTY.1 D1956_REV0 HEX BOLT M16 X 80 242 D7853_REV1 B.B.S. TINE (HEAVY) 243 E1-1080_REV0 WASHER M16 FORM A 564 E1-1231_REV0 M16 NYLOC 285 F30976_REV1 RAKE BAR W.A. 35CRS (6') 16 SP01108_REV0 HEX BOLT M16 X 90 4

FS0771 - 2.4m

ITEM NO. PART NUMBER DESCRIPTION QTY.1 D1956_REV0 HEX BOLT M16 X 80 322 D7853_REV1 B.B.S. TINE (HEAVY) 323 E1-1080_REV0 WASHER M16 FORM A 724 E1-1231_REV0 M16 NYLOC 365 F30985_REV1 RAKE BAR W.A. (8' STD) 16 SP01108_REV0 HEX BOLT M16 X 90 4

SPRING TINE GROOMING RAKE - FS1148 1.2m, FS0761 1.8m, FS0771 2.4m

P8.01


16 3 3 4 2 3 3 45

ISO VIEW

FS1272 - 1.2m

ITEM NO. PART NUMBER DESCRIPTION QTY.1 403074_REV0 RAKE BAR W.A. 29CRS 1200 12 D1956_REV0 HEX BOLT M16 X 80 223 E1-1080_REV0 WASHER M16 FORM A 524 E1-1231_REV0 M16 NYLOC 265 F36926_REV1 B.B.S. TINE (FINE) 226 SP01108_REV0 HEX BOLT M16 X 90 4

FS1075 - 1.8m

ITEM NO. PART NUMBER DESCRIPTION QTY.2 D1956_REV0 HEX BOLT M16 X 80 323 E1-1080_REV0 WASHER M16 FORM A 724 E1-1231_REV0 M16 NYLOC 365 F36926_REV1 B.B.S. TINE (FINE) 321 F36946_REV2 RAKE BAR W.A. 29CRS (6') 16 SP01108_REV0 HEX BOLT M16 X 90 4

FS1076 - 2.4ITEM NO. PART NUMBER DESCRIPTION QTY.

2 D1956_REV0 HEX BOLT M16 X 80 423 E1-1080_REV0 WASHER M16 FORM A 924 E1-1231_REV0 M16 NYLOC 465 F36926_REV1 B.B.S. TINE (FINE) 421 F37028_REV2 RAKE BAR W.A. (8' FINE) 16 SP01108_REV0 HEX BOLT M16 X 90 4

FINE GROOMING RAKE - FS1272 1.2m, FS1075 1.8m, FS1076 2.4m

P9.01


5

6

3 4 4 9

710108

2

1

2

710108

3 4 4 9

5

1

1

Also available with yellow brushes - Part Number: SP24006 (Models: FS0765Y (1.8m), FS0516Y (2.4m))

FS0765B - 1.8mITEM NO. PART NUMBER DESCRIPTION Default/QTY.

1 D1481_REV1 DECAL 22 D1520_REV4 BRUSH 60cm BLACK 43 SP01108_REV0 HEX BOLT M16 X 90 44 E1-1080_REV0 WASHER M16 FORM A 85 F32208_REV2 Z BRUSH FRAME 1.8 ASSY 16 F32347_REV1 DECAL 17 SP01124_REV0 HEX SET SCREW M10 X 45 128 SP02008_REV0 NUT M10 NYLOC (T) 129 SP02028_REV0 NUT M16 NYLOC (T) 4


FS0516B - 2.4mITEM NO. PART NUMBER DESCRIPTION Default/QTY.

1 D1481_REV1 DECAL 22 D1520_REV4 BRUSH 60cm BLACK 53 SP01108_REV0 HEX BOLT M16 X 90 44 E1-1080_REV0 WASHER M16 FORM A 85 F32347_REV1 DECAL 16 F32608_REV2 BRUSH FRAME 2.4 ASSY 17 SP01124_REV0 HEX SET SCREW M10 X 45 158 SP02008_REV0 NUT M10 NYLOC (T) 159 SP02028_REV0 NUT M16 NYLOC (T) 4


ZIG ZAG BRUSH - FS0869 B/Y 1.8m, FS0516 B/Y 2.4m

P10.01


52 3 3 4 6 8 8 7 1

Also available with yellow brushes - Part Number: SP24006 (Models: FS0865Y (1.2m), FS0765Y(1.8m), FS0775Y (2.4m))

FS0865 - 1.2m ITEM NO. PART NUMBER DESCRIPTION QTY.

1 D1520_REV4 BRUSH 60cm BLACK 22 SP01108_REV0 HEX BOLT M16 X 90 43 E1-1080_REV0 WASHER M16 FORM A 84 E1-1231_REV0 M16 NYLOC 45 F31554_REV2 BRUSH FRAME ASSY 4' 16 SP01124_REV0 HEX SET SCREW M10 X 45 67 SP02008_REV0 NUT M10 NYLOC (T) 68 SP03011_REV0 WASHER M10 FORM A 12

FS0765 - 1.8mITEM NO. PART NUMBER DESCRIPTION BLACK/QTY.


FS0775 - 2.4mITEM NO. PART NUMBER DESCRIPTION QTY.


STRAIGHT BRUSH - FS0865 Y/B 1.2m, FS0765 Y/B 1.8m, FS0775 Y/B 2.4m

P11.01


17 6 6 8 24 4

2

25

13

1510

25

2

13

16

12

1111

12

3 11 15

14 231

3 19152124

7 22 22 18

5

1

12

15

17

9

20

RIVNUT & TINE

FRONT GUARD PANEL AND RIGHT ROLLER REMOVED FOR CLARITY

ITEM NO. PART NUMBER DESCRIPTION Default/QTY.1 401583_REV0 GUARD SUPPORT 32 403054_REV0 FRAME W.A. (ROLASPIKE 1200) 13 403056_REV0 SHAFT (ROLASPIKE 1200) 14 403057_REV0 GUARD (ROLASPIKE 1200) 25 D1921_REV1 BEARING BPFL6-30 46 E1-1080_REV0 WASHER M16 FORM A 87 E1-1114_REV0 HEX BOLT M8 X 65 58 E1-1231_REV0 M16 NYLOC 49 F37287_REV4 ROLLER SPIKE TINE 210 F37735_REV2 ROLASPIKE DRUM (180 - 602) 211 F37851_REV2 SPACER 312 F37853_REV1 TAB WASHER M16 213 F37854_REV2 STAND LEG 214 SP01012_REV0 BUTTON HEAD M8 X 12 615 SP01035_REV0 HEX SET SCREW M10 X 25 816 SP01037_REV0 HEX SET SCREW M16 X 30 217 SP01108_REV0 HEX BOLT M16 X 90 418 SP02006_REV0 NUT M8 NYLOC (T) 519 SP02046_REV0 RIVNUT HEX M10 (1.0-3.5) [NO HEAD] 820 SP02048_REV0 RIVNUT HEX M8 (0.5-3.0) [HEADED] 221 SP03011_REV0 WASHER M10 FORM A 822 SP03015_REV0 WASHER M8 FORM C 1023 SP03029_REV0 WASHER M8 SPRING LOCK 624 SP03034_REV0 WASHER M10 SPRING LOCK 825 SP14009_REV0 KNOB PLASTIC M8 MALE 2

ITEM NO. PART NUMBER DESCRIPTION QTY.1 401581_REV0 GUARD 22 401583_REV0 GUARD SUPPORT 43 D1921_REV1 BEARING BPFL6-30 64 E1-1080_REV0 WASHER M16 FORM A 85 E1-1114_REV0 HEX BOLT M8 X 65 76 E1-1231_REV0 M16 NYLOC 47 F37287_REV4 ROLLER SPIKE TINE 38 F37735_REV2 ROLASPIKE DRUM (180 - 602) 39 F37850_REV2 SHAFT (ROLASPIKE 6') 110 F37851_REV2 SPACER 411 F37852_REV5 FRAME W.A. (ROLASPIKE 6') 112 F37853_REV1 TAB WASHER M16 213 F37854_REV2 STAND LEG 214 SP01012_REV0 BUTTON HEAD M8 X 12 815 SP01035_REV0 HEX SET SCREW M10 X 25 1216 SP01037_REV0 HEX SET SCREW M16 X 30 217 SP01108_REV0 HEX BOLT M16 X 90 418 SP02006_REV0 NUT M8 NYLOC (T) 719 SP02046_REV0 RIVNUT HEX M10 (1.0-3.5) [NO HEAD] 1220 SP02048_REV0 RIVNUT HEX M8 (0.5-3.0) [HEADED] 321 SP03011_REV0 WASHER M10 FORM A 1222 SP03015_REV0 WASHER M8 FORM C 1423 SP03029_REV0 WASHER M8 SPRING LOCK 824 SP03034_REV0 WASHER M10 SPRING LOCK 1225 SP14009_REV0 KNOB PLASTIC M8 MALE 2

ITEM NO. PART NUMBER DESCRIPTION QTY.1 401583_REV0 GUARD SUPPORT 52 403050_REV0 FRAME W.A. (ROLASPIKE 2400) 13 403052_REV0 ROLASPIKE SHAFT 2400 14 403053_REV0 GUARD (ROLASPIKE 2400) 25 D1921_REV1 BEARING BPFL6-30 86 E1-1080_REV0 WASHER M16 FORM A 87 E1-1114_REV0 HEX BOLT M8 X 65 98 E1-1231_REV0 M16 NYLOC 49 F37287_REV4 ROLLER SPIKE TINE 410 F37735_REV2 ROLASPIKE DRUM (180 - 602) 411 F37851_REV2 SPACER 512 F37853_REV1 TAB WASHER M16 213 F37854_REV2 STAND LEG 214 SP01012_REV0 BUTTON HEAD M8 X 12 1015 SP01035_REV0 HEX SET SCREW M10 X 25 1616 SP01037_REV0 HEX SET SCREW M16 X 30 217 SP01108_REV0 HEX BOLT M16 X 90 418 SP02006_REV0 NUT M8 NYLOC (T) 919 SP02046_REV0 RIVNUT HEX M10 (1.0-3.5) [NO HEAD] 1620 SP02048_REV0 RIVNUT HEX M8 (0.5-3.0) [HEADED] 421 SP03011_REV0 WASHER M10 FORM A 1622 SP03015_REV0 WASHER M8 FORM C 1823 SP03029_REV0 WASHER M8 SPRING LOCK 1024 SP03034_REV0 WASHER M10 SPRING LOCK 1625 SP14009_REV0 KNOB PLASTIC M8 MALE 2

ROLASPIKE - FS1271 1.2m, FS1169 1.8m, FS1267 2.4m

P12.01


11 8 20 17

11 21 20

14

12

4

3

2

1

5

1518

19

7

89

8

112120

2

22

6

161019

11 21 20 811 21 20 8

6

6

13

23

ITEM NO. PART NUMBER DESCRIPTION QTY.1 401513_REV0 MULTISLIT SIDE COVER LH 12 401517_REV0 MULTISLIT SIDE COVER RH 13 401526_REV0 SLITTER SHAFT 1200 WA 14 401528_REV0 MULTISLIT 1200 TOP COVER 15 401529_REV1 MULTISLIT 1200 FRONT COVER 16 403260_REV0 TIF SLITTER 1200 W.A. 17 D1871_REV1 RIVET 3.2 X 6 28 D6725_REV2 WASHER GUARD 89 D6951_REV1 TINE 32

10 E1-1080_REV0 WASHER M16 FORM A 411 E1-1134_REV0 HEX SET SCREW M10 X 80 1212 F22430_REV1 BEARING BP207-35 213 F34904_REV1 GUARD CLAMP 414 F36000_REV2 SERIAL NO PLATE (SISIS) 115 SP01065_REV0 HEX SET SCREW M12 X 30 6416 SP01108_REV0 HEX BOLT M16 X 90 417 SP02008_REV0 NUT M10 NYLOC (T) 418 SP02010_REV0 NUT M12 NYLOC (T) 6419 SP02028_REV0 NUT M16 NYLOC (T) 420 SP03011_REV0 WASHER M10 FORM A 1221 SP03034_REV0 WASHER M10 SPRING LOCK 822 SP14011_REV0 INSERT 50MM SQ. 1.0-3.0 423 SP18015_REV0 DECAL MULTISLIT 1200 1

DEEP SLITTER - FS1162

P13.01


18 7 7 8

14

12 5

910

16622

15 20 20 19

2

1

4

3

15202019

11

17 23 21

13

ITEM NO. PART NUMBER DESCRIPTION QTY.1 D6056_REV2 SPACER 22 D6428_REV1 SPACER 23 D7962_REV1 ROLLER SHAFT 4FT 14 D7966_REV1 SCRAPER BRACKET ASSY 4' 15 D7967_REV1 SCRAPER BLADE RUBBER 4' 16 E1-1065_REV0 SPRING WASHER M12 SQUARE SECTION 27 E1-1080_REV0 WASHER M16 FORM A 88 E1-1231_REV0 M16 NYLOC 49 E1-1633_REV0 HEX SET SCREW M20 X 40 2

10 E1-1635_REV0 M20 SPRING WASHER 211 F21768_REV0 BEARING BPF7-35 212 F31288_REV1 SCRAPER CLAMP 4' 113 F31550_REV1 ROLLER FRAME 4' ASSY 114 F36128_REV1 ROLLER 4' 115 SP01027_REV0 HEX SET SCREW M8 X 40 516 SP01078_REV0 HEX SET SCREW M12 X 40 217 SP01105_REV0 HEX SET SCREW M10 X 30 618 SP01108_REV0 HEX BOLT M16 X 90 419 SP02006_REV0 NUT M8 NYLOC (T) 520 SP03008_REV0 WASHER M8 FORM A 1021 SP03011_REV0 WASHER M10 FORM A 622 SP03012_REV0 WASHER M12 FORM A 223 SP03034_REV0 WASHER M10 SPRING LOCK 6

ITEM NO. PART NUMBER DESCRIPTION QTY.1 D2731_REV2 SCRAPER BRACKET ASSY 6' 12 D3856_REV1 RUBBER SCRAPER 13 D6056_REV2 SPACER 24 D6428_REV1 SPACER 25 D6544_REV1 ROLLER SHAFT 16 E1-1065_REV0 SPRING WASHER M12 SQUARE SECTION 27 E1-1080_REV0 WASHER M16 FORM A 88 E1-1231_REV0 M16 NYLOC 49 E1-1633_REV0 HEX SET SCREW M20 X 40 2

10 E1-1635_REV0 M20 SPRING WASHER 211 F21768_REV0 BEARING BPF7-35 212 F30977_REV1 ROLLER FRAME 6' ASSY 113 F31002_REV1 SCRAPER CLAMP 114 F36129_REV1 ROLLER 6' 115 SP01027_REV0 HEX SET SCREW M8 X 40 816 SP01078_REV0 HEX SET SCREW M12 X 40 217 SP01105_REV0 HEX SET SCREW M10 X 30 618 SP01108_REV0 HEX BOLT M16 X 90 419 SP02006_REV0 NUT M8 NYLOC (T) 820 SP03008_REV0 WASHER M8 FORM A 1621 SP03011_REV0 WASHER M10 FORM A 622 SP03012_REV0 WASHER M12 FORM A 223 SP03034_REV0 WASHER M10 SPRING LOCK 6

ITEM NO. PART NUMBER DESCRIPTION QTY.1 D6056_REV2 SPACER 22 D6421_REV1 ROLLER SHAFT 13 D6428_REV1 SPACER 24 D6433_REV2 RUBBE SCRAPER BLADE 15 E1-1065_REV0 SPRING WASHER M12 SQUARE SECTION 26 E1-1080_REV0 WASHER M16 FORM A 87 E1-1231_REV0 M16 NYLOC 48 E1-1633_REV0 HEX SET SCREW M20 X 40 29 E1-1635_REV0 M20 SPRING WASHER 210 F21768_REV0 BEARING BPF7-35 211 F30987_REV1 ROLLER FRAME ASSY 8' 112 F31003_REV1 SCRAPER BRACKET ASSY 8' 113 F31013_REV2 SCRAPER BRACKET STIFFENER 114 F36130_REV1 ROLLER 8' 115 SP01027_REV0 HEX SET SCREW M8 X 40 1016 SP01078_REV0 HEX SET SCREW M12 X 40 217 SP01105_REV0 HEX SET SCREW M10 X 30 618 SP01108_REV0 HEX BOLT M16 X 90 419 SP02006_REV0 NUT M8 NYLOC (T) 1020 SP03008_REV0 WASHER M8 FORM A 2021 SP03011_REV0 WASHER M10 FORM A 622 SP03012_REV0 WASHER M12 FORM A 223 SP03034_REV0 WASHER M10 SPRING LOCK 6

ROLLER - FS0863 1.2m, FS0763 1.8m, FS0773 2.4m

P14.01


4

3

6 1 1 25887

FS1110 - 2m

ITEM NO. PART NUMBER DESCRIPTION QTY.1 E1-1080_REV0 WASHER M16 FORM A 82 E1-1231_REV0 M16 NYLOC 43 F37296_REV2 FRAME ASSY 14 F37298_REV2 2M SKID 15 SP01105_REV0 HEX SET SCREW M10 X 30 86 SP01108_REV0 HEX BOLT M16 X 90 47 SP02008_REV0 NUT M10 NYLOC (T) 88 SP03011_REV0 WASHER M10 FORM A 16

FS1109 - 2.4m

ITEM NO. PART NUMBER DESCRIPTION QTY.1 E1-1080_REV0 WASHER M16 FORM A 82 E1-1231_REV0 M16 NYLOC 43 F37296_REV2 FRAME ASSY 14 F37297_REV2 2.4M SKID 15 SP01105_REV0 HEX SET SCREW M10 X 30 86 SP01108_REV0 HEX BOLT M16 X 90 47 SP02008_REV0 NUT M10 NYLOC (T) 88 SP03011_REV0 WASHER M10 FORM A 16

GRADER PLATE - FS1110 2m, FS1109 2.4m

P15.01


7

2

3

8 13 13 11

10556

91441412

1

1

FS0762 - 1.8m

ITEM NO. PART NUMBER DESCRIPTION QTY.1 D6425_REV1 PARALLEL LINK ARM 42 D6541_REV1 BLADE 6' 23 D6545_REV1 TRULUTE FRAME 6' 14 D6650_REV1 STANDARD FERRULE 85 E1-1080_REV0 WASHER M16 FORM A 86 E1-1231_REV0 M16 NYLOC 47 F30975_REV1 SUB FRAME ASSY 18 SP01035_REV0 HEX SET SCREW M10 X 25 109 SP01078_REV0 HEX SET SCREW M12 X 40 8

10 SP01108_REV0 HEX BOLT M16 X 90 411 SP02008_REV0 NUT M10 NYLOC (T) 1012 SP02010_REV0 NUT M12 NYLOC (T) 813 SP03011_REV0 WASHER M10 FORM A 2014 SP03012_REV0 WASHER M12 FORM A 16

FS0772 - 2.4m

ITEM NO. PART NUMBER DESCRIPTION QTY.1 D5202_REV1 BLADE 8' 22 D6425_REV1 PARALLEL LINK ARM 43 D6426_REV1 LUTE FRAME 8' 14 D6650_REV1 STANDARD FERRULE 85 E1-1080_REV0 WASHER M16 FORM A 86 E1-1231_REV0 M16 NYLOC 47 F30975_REV1 SUB FRAME ASSY 18 SP01035_REV0 HEX SET SCREW M10 X 25 149 SP01078_REV0 HEX SET SCREW M12 X 40 810 SP01108_REV0 HEX BOLT M16 X 90 411 SP02008_REV0 NUT M10 NYLOC (T) 1412 SP02010_REV0 NUT M12 NYLOC (T) 813 SP03011_REV0 WASHER M10 FORM A 2814 SP03012_REV0 WASHER M12 FORM A 16

LEVELLING LUTE - FS0762 1.8m, FS0772 2.4m

P16.01


1113668

5

7171715

2

12161614 4

5

9310

11

ITEM NO. PART NUMBER DESCRIPTION QTY.1 D3051_REV2 SQUARE WASHER 22 D5622_REV0 SPLIT PIN DIA5 x 50 23 D7904_REV1 SPACER SPRING 244 D8032_REV0 BEARING BPFL5-25 25 D8298_REV1 BEARING UCFT205-25 26 E1-1080_REV0 WASHER M16 FORM A 87 E1-1157_REV0 HEX BOLT M12 X 45 48 E1-1231_REV0 M16 NYLOC 49 F30470_REV2 SLITTER DISC ASSY 26

10 F30474_REV1 SLITTER SHAFT (956mm) 211 F30974_REV1 SLITTER FRAME 6' ASSY 112 SP01027_REV0 HEX SET SCREW M8 X 40 213 SP01108_REV0 HEX BOLT M16 X 90 414 SP02006_REV0 NUT M8 NYLOC (T) 215 SP02010_REV0 NUT M12 NYLOC (T) 416 SP03008_REV0 WASHER M8 FORM A 417 SP03012_REV0 WASHER M12 FORM A 8


10 F31552_REV1 SLITTER SHAFT 2

11 F33598_REV1 SLITTER FRAME 4' ASSY 112 SP01027_REV0 HEX SET SCREW M8 X 40 213 SP01108_REV0 HEX BOLT M16 X 90 414 SP02006_REV0 NUT M8 NYLOC (T) 215 SP02010_REV0 NUT M12 NYLOC (T) 416 SP03008_REV0 WASHER M8 FORM A 417 SP03012_REV0 WASHER M12 FORM A 8


10 F30478_REV1 SLITTER SHAFT 211 F30986_REV1 SLITTER FRAME 8' ASSY 112 SP01027_REV0 HEX SET SCREW M8 X 40 213 SP01108_REV0 HEX BOLT M16 X 90 414 SP02008_REV0 NUT M10 NYLOC (T) 215 SP02010_REV0 NUT M12 NYLOC (T) 416 SP03008_REV0 WASHER M8 FORM A 417 SP03012_REV0 WASHER M12 FORM A 8

SPIKER SLITTER - FS0561 1.2m, FS0764 1.8m, FS0774 2.4m

P17.01


NOTES


SISIS, Ashbourne Road, Kirk Langley, Derbyshire, DE6 4NJ, England

Tel: +44 (0) 1332 824 777

Fax: +44 (0) 1332 824 525

Email: [email protected]

www.sisis.com A division of Howardson Ltd – a proudly British company Company reg No: 641526 – Vat No GB 345 9918 12


play frames & combination implements - sisis · 2 certificate of conformity play frames &...

Documents