TF050

PLASTICADE® BOLLARD COVERS● 1/8” thick plastic bollard covers, fit 4” and 6” posts

● Attractive domed top and smooth sleeve surface

● Optional two strips of 3/4“ reflective tape increase bollard visibility - tape is recessed to keep it scratch free

● Installs in minutes - no adhesives, screws, or tools required - place provided compressible foam strips on bollard, then slide on cover

● Engineered plastic resists fading and withstands severe weather - 5 year warranty against fading

● Three heights available, 52”, 60”, and 72” - can be custom cut to your required length with minimum order quantity

● Available in yellow, red, and blue - custom colors with minimum order quantity

● Made in the U.S.A.

Extend The Life OfYour Bollards...

Cover Them!

5 YearWARRANTY

AGAINSTFADING

Never Paint YourBollards Again!

Get OurMaintenance FreeAt tract ive Covers

72”H 6” Wide 4” Wide

60”H

52”H

Plasticade.com

MADE IN THE USA

100 Howard AvenueDes Plaines, IL 60018phone (800) 772-0355

fax (847) 966-8074

PLASTICADE® BOLLARD COVERS

1/8'' Typical wall thickness throughout

5.25”

OD

6.0

”

1.0

”

3.5

”

1.0

” 6

.0”

3.5

”

Fits 4” Post Fits 6” Post

7.35 OD

Composition High Density Polyethylene

Weights4” Cover

6” Cover

Specs

52” H - 3.6 lbs.60” H - 4.1 lbs.72” H - 5 lbs.

52” H - 5.15 lbs.60” H - 6 lbs.72” H - 7.1 lbs.

Reflective tape is 3/4” H

Cover Colors& Tape Options

Yellow with red tapeRed with white tapeBlue with white tape

Installation InstructionsOur covers are installed onto bollards using twocompressible foam strips (provided).

Apply the foam strips to the bollard so that they criss-crossat the top of the bollard.

Slide the cover over the foam strips and bollard, applying pressure as necessary to push the sleeve down to the ground.

The foam strips will compress creating a tight fit.

4” Cover

6” Cover

Standard AvailableHeights

Inside Diameter 5”

Fits Pipe With Diameter - 4.5”(Pipe Circumference - 14” -15”)

Inside Diameter - 7.1”

Fits Pipe With Diameter - 6.625”(Pipe Circumference - 20.5” - 21.5”)

52”, 60”, and 72”Cover should be at least 2” tallerthan the height of the post.

Bollard Sizing Guide

Tape Size

Quick and Easy Installation

Plasticade.com

If pipe/post is not flat on top, measure the circumference. Divide that measurement by 3.14 for the pipe diameter.

Measurement Help