plastic sheets for your needs data sheets - … · the consistent high quality demands from the...

DATA SHEETS

P L A S T I C S H E E T S F O R Y O U R N E E D S

MAKROCLEAR™ is transparent polycarbonate sheet.

The product is produced with vast knowledge of our

production team experienced in producing mono, co and

tri-extrusion. The product is virtually unbreakable with

extremely high impact resistance and offers high

temperature performance too.

MAKROCLEAR™ provides designers, specifiers and

architects with possibilities to use transparent

polycarbonate sheets in applications where high clarity

and optical performance is required. The consistent high

quality demands from the market helps to improve

machining, screen printability and thermoformability

EXCELLENT FIRE PERFORMANCE complying

requirements to EN 13501-1 (EUROPEAN BUILDING

STD). In case of fire, the sheet will melt and allow venting

where heat and smoke will be let out and therefore

reduce the growth of fire by flame spread.

MAKROCLEAR™ TRANSPARENT PRODUCTS – POLYCARBONATE SHEETS

MAKROCLEAR™ BENEFITS:

• Good optical quality

• Half the weight of glass

• More than 10 times the impact strength of high

impact PMMA

• Easy to thermoform or fabricate

• Good fire classification

APPLICATION AREAS:

MAKROCLEAR™ is the perfect solution for machining

protection, safety glazing, ice hockey rinks, vandal

protection etc. MAKROCLEAR™ thermoforms very easily

and is often used in signs, displays, riot shields,

windows, medical equipment, bicycle helmets etc.

DELIVERY PROGRAM:

Standard size: 2050 x 3050 mm

2050 x 3050 mm (2 – 20 mm)

Thickness range: 0,75 – 20 mm

Colour: Clear

Embossing: ICE™, TEX™, Grain 35, ANTI-REFLEX™

Special sizes and thicknesses on request

Version 2014-08-20

Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden

Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com

Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such

information. Detailed product specification and technical manual/information is available on request.

Property Value Unit Standard

Physical properties

Density 1,2 g/cm3 ISO 1183

Refractive index (20 °C) 1,586 ISO 489

Moisture absorption 24 hours, 23 °C, 50% RH 0,15 % ISO 62

Mechanical properties

Tensile strength at yield (at break) 60 (70) N/mm2 ISO 527

Elongation at yield (at break) 6 (110) % ISO 527

Elastic modulus >2300 N/mm2 ISO 527

Flexural modulus >2300 N/mm2 ISO 178

Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/1eU

Charpy notched impact strength -30 °C 11 kJ/m2 ISO 179/1eA

Izod notched impact strength +23 °C 65 kJ/m2 ISO 180/1A

Izod notched impact strength -30 °C 10 kJ/m2 ISO 180/1A

Thermal properties

Linear coefficient of thermal expansion (20-70 °C) 65x10-6 K-1 ISO 11359-2

Heat deflection temperature, HDT A (1,80 N/mm2) 132 °C ISO 75

Heat deflection temperature, HDT B (0,45 N/mm2) 142 °C ISO 75

Vicat temperature VST/B 120 149 °C ISO 306


Thermal conductivity 0,20 W/m.K DIN 8302

Electrical properties

Volume resistivity, dry >1014 Ω . m IEC 60093

Surface resistivity, dry 1016 Ω IEC 60093

Dielectric strength, dry 30 kV/mm IEC 60243

Dielectric constant, dry 50 Hz 3 IEC 60250

Dielectric constant, dry 1 MHz 2,9 IEC 60250

Dissipation factor (tan δ), dry 50 Hz 0,001 IEC 60250

Dissipation factor (tan δ), dry 1 MHz 0,01 IEC 60250

MAKROCLEAR™ TECHNICAL SPECIFICATIONS

MAKROCLEAR™ FR is flame Retardant Polycarbonate

with high clarity and surface quality. The product can be

used where fire performance is required. The product is

virtually unbreakable with extremely high impact

resistance and offers high temperature performance too.

MAKROCLEAR™ provides designers, specifiers and





machining, screen printability and thermoformability.


requirements to UL 94 V0 from 3 mm. In case of fire, the

sheet will melt and allow venting where heat and smoke

will be let out and therefore reduce the growth of fire by

flame spread.

MAKROCLEAR™ FR

TRANSPARENT PRODUCTS – POLYCARBONATE SHEETS

MAKROCLEAR™ FR BENEFITS:

• UL 94 V0 FROM 3 mm

• Outstanding high clarity and surface quality

• High Impact strength



APPLICATION AREAS:

MAKROCLEAR™ FR is the best choice where there is

a demand for improved fire properties.

DELIVERY PROGRAM:


Thickness range: 3 – 6 mm

Colour: Clear



Version 2014-08-20






MAKROCLEAR® FR special properties

Limiting Oxygen index 35 % ISO 4589

V0 (on resin) 3 Mm UL94

Physical properties













Thermal properties















MAKROCLEAR™ FR TECHNICAL SPECIFICATIONS

MAKROCLEAR™ FA is transparent polycarbonate sheet.

The product has high clarity and surface quality ideal to

replace Glass in food contact applications. The product

is virtually unbreakable with extremely high impact

resistance and offers high temperature performance too.

MAKROCLEAR™ FA provides designers with possibilities

to use transparent polycarbonate sheets in applications

where high clarity and optical performance is required.

The consistent high quality demands from the market

helps to improve machining, screen printability and

thermoformability

MAKROCLEAR™ FA is an extruded polycarbonate sheet

made from a special resin complying with food contact

regulations governed by the US Food and Drug

Administration and EC Directive. Sawing and forming can

be performed by using the same methods as for standard

polycarbonate.

MAKROCLEAR™ FA


MAKROCLEAR™ FA BENEFITS:

• Food approval

• Resistance to high temperature


• High impact strength


APPLICATION AREAS:

MAKROCLEAR™ FA is the right choice for food

packaging and applications where the product will

come in direct contact with food, such as displays

and boxes.

DELIVERY PROGRAM:



Colour: Clear



Version 2014-08-20






Physical properties













Thermal properties















MAKROCLEAR™ FA TECHNICAL SPECIFICATIONS

MAKROCLEAR™ SQ is Selected Quality transparent

polycarbonate sheet is produced with advanced extrusion

technology with outstanding optical and surface quality.



tri-extrusion.

The product is virtually unbreakable with extremely high

impact resistance and offers high temperature

performance too. The product provides designers,

specifiers and architects with possibilities to use the

sheets in applications where high optical quality is

required replacing glass and other transparent plastics.

The consistent high quality demands from the market

helps to improve optical quality, machining, screen

printability and thermoformability.






MAKROCLEAR™ SQ


MAKROCLEAR™ SQ BENEFITS:

• High optical quality and outstanding clarity

• Half the weightc of glass


impact PMMA

• Good fire classification

APPLICATION AREAS:

The selective quality properties of MAKROCLEAR™ SQ

makes it a perfect solution for glazing, machine

protection, safety glazing, ice hockey rinks, visors,

optical distortion free parts, vandal protection, sound

walls / sound barriers etc.

DELIVERY PROGRAM:



Colour: Clear

Embossing: No


Version 2014-08-20






Physical properties













Thermal properties















MAKROCLEAR™ SQ TECHNICAL SPECIFICATIONS

MAKROLIFE™ is transparent polycarbonate sheet with

double sided UV-protection. The product is produced with

vast knowledge of our production team experienced in

producing mono, co and tri-extrusion. The product has a

UV protection layer guaranteed against UV radiation and

yellowing hence excellent for outdoor applications where

Glass is used. The product is virtually unbreakable with



MAKROLIFE™ provides designers, specifiers and





machining, screen printability and thermoformability.






MAKROLIFE™


MAKROLIFE™ BENEFITS:

• Double-sided UV-protection


impact PMMA

• Easy to thermoform and fabricate


APPLICATION AREAS:

MAKROLIFE™ is used in barrel vaults, roof lights, wide

span architectural glazing, bus shelters, poster

protection, skylights, greenhouses, covered walkways

and sport arenas. MAKROLIFE™ has set the industrial

standard in applications for vending machines, lamps,

nurseries, public telephones, stairs, soundprotections

walls and many others.

DELIVERY PROGRAM:



Colour: Clear



Version 2014-08-20






Physical properties













Thermal properties















MAKROLIFE™ TECHNICAL SPECIFICATIONS

MAKROLIFE™ SL sheet has outstanding clarity

developed to replace Glass. The product offers excellent

optical surface quality provided by the uniform and well

controlled distribution of the UV protection layer.

MAKROLIFE™ SL is virtually unbreakable with the high

impact strength Of Polycarbonate. The product offers

additional protection against UV radiation and yellowing

which is excellent for weatherable outdoor applications.

The product is half the weight of glass and offers

excellent UV Performance even after deeper

thermoforming.

MAKROLIFE™ SL


MAKROLIFE™ SL BENEFITS:

• Additional UV-protection


impact PMMA

• Easy to thermoform and fabricate

• Tailor made UV protection for thermo formers

APPLICATION AREAS:

Ski Lifts, stadia, atria, continuous glazing, cladding,

partitioning, safety and security glazing, barrel vaults,

roof lights, wide span architectural glazing, bus shelters,

poster protection, skylights, greenhouses, covered

walkways and sport arenas.

MAKROLIFE™ SL has set the industrial standard in

applications for vending machines, lamps, nurseries,

public telephones, stairs, sound protections

walls and many others.

DELIVERY PROGRAM:



Colour: Clear

Version 2014-08-20






Physical properties













Thermal properties















MAKROLIFE™ SL TECHNICAL SPECIFICATIONS

COLORADO® offers a wide range of extruded

transparent coloured polycarbonate sheet. The product

is produced with vast knowledge of our production team

experienced in producing mono, co and tri-extrusion.

The product is virtually unbreakable with extremely high

impact resistance and offers high temperature

performance too.

COLORADO® provides designers, specifiers and

architects with possibilities to use transparent coloured


and optical performance is required.

Arla Plast AB offer a range of standard coloured tints but

also offer good colour matching service with low

minimum quantities

STOCK COLOURS:

Light Bronze 130, Grey 133, Opal 30%, Opal 50%

Standard colours: Medium Bronze 131, Dark Bronze 132,

Yellow 700, Orange 710, Red 720, Green 730, Blue 740,

DoveBlue 745, Grey/Blue 746, Glass Tint 750. Colour

matching service on request.

ALSO AVAILABLE:

COLORADO® SL, Hard Coated (scratch resistant) and

our textured surfaces.






COLORADO®


COLORADO® BENEFITS:

• Wide range of transparent colours


impact PMMA

• Easy to thermoform or cold bend into complex shapes


APPLICATION AREAS:

For glazing, signs, displays, machine protection and in

other applications where a high impact strength and

good aesthetics are needed.

DELIVERY PROGRAM:



Colour: Standard colours and customer specific colours

upon request

Embossing: ICE™, TEX™, Grain 35, ANTI-

REFLEX™


Version 2014-08-20






Physical properties













Thermal properties















COLORADO® TECHNICAL SPECIFICATIONS

COLORADO® LED offers a range of extruded translucent coloured polycarbonate. The product is produced with vast knowledge of our production team experienced in producing mono, co and tri-extrusion. The product is virtually unbreakable with extremely high impact resistance and offers high temperature performance too. Arla Plast AB offer a range of LED colours with diffusing properties. The product can be created with a UV protection layer guaranteed against UV radiation and yellowing hence excellent for outdoor applications COLORADO® LED provides designers, specifiers and architects with possibilities to use the LED coloured polycarbonate sheets in various applications with demands of diffusing effects and good light spreading. STANDARD COLOURS: Opal DB and Opal White. Colour matching service on request. ALSO AVAILABLE: COLORADO® LED UV and our textured surfaces. EXCELLENT FIRE PERFORMANCE complying requirements to EN 13501-1 (EUROPEAN BUILDING STD). In case of fire, the sheet will melt and allow venting where heat and smoke will be let out and therefore reduce the growth of fire by flame spread.

COLORADO® LED


COLORADO® LED BENEFITS:

• Excellent light spreading and hiding of the light source

• LED colours for homogenous light diffusion

• More than 10 times the impact strength of high impact

acrylic

• Easy to cold bend or thermoform into complex shapes

APPLICATION AREAS:

LED applications, lamp covers, signs, displays and in

other applications where a high impact strength and

good light spreading and diffusion are needed.

DELIVERY PROGRAM:


Opal LED colours: 2 - 4 mm

Colour: Opal DB, Opal White.

Customer specific colours upon request.

Embossing: Smooth, ICE™, TEX™, ANTI-REFLEX™

Special size and thickness on request.

Version 2015-11-06

Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com

Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.


Physical properties












Thermal properties

Coefficient of linear thermal expansion (20-70 °C) 65x10-6 K-1 ISO 11359-2














Light transmittance, Lt

3 mm Opal DB 70 % ASTM D1003

3 mm Opal White 48 % ASTM D1003

COLORADO® LED TECHNICAL SPECIFICATIONS

COLORADO® UV SOLAR CONTROL sheet is developed

for applications where heat or Solar Radiation is reflected

or absorbed providing low heat build up, good light

transmission and ambiance. The Solar control product

provides heat build up protection hence used for

applications to reduce air conditioning costs.

COLORADO® UV SOLAR CONTROL has a unique

colour tint which allows the sheet to have outstanding

transparency or clarity. The surface quality is superior

due to our line capa-bilities to control the distribution of

the UV protection layer.

ALSO AVAILABLE as Saphir Colorado (Hard Coated,

scratch resistant).






COLORADO® UV SOLAR CONTROL


COLORADO® UV SOLAR CONTROL BENEFITS:

• The sheet absorbs IR heat and creates a stable

indoor climate


impact PMMA



• Two sides UV as standard

APPLICATION AREAS:

Building industry roofing, cladding, sidewalls,

conservatories, domes, skylights, sheds, car ports,

smoke vents, swimming pool covers, glasshouses,

shoppingcentre roofing, railway/metro station and stadia

roofing. Agriculture greenhouses, lorry/tractor ports and

farm/barn buildings.

DELIVERY PROGRAM:



Colour: SG 63, SG 74, Blue, Grey and Bronze


Version 2014-08-20






Physical properties













Thermal properties















Spectral properties

Light transmittance Tv

3 mm SG 63 63 % ASTM D1003

3 mm SG 74 74 % ASTM D1003

3 mm Blue 62 % ASTM D1003

3 mm Grey 62 % ASTM D1003

3 mm Bronze 68 % ASTM D1003

Total solar energy transmittance g

3 mm Grey 68 % EN 14500

3 mm Bronze 68 % EN 14500

3 mm Blue 66 % EN 14500

3 mm Green SG 63 51 % EN 14500

3 mm Green SG 74 63 % EN 14500

COLORADO®SOLAR CONTROL TECHNICAL SPECIFICATIONS

PC FROST™ is a transparent polycarbonate sheet.



tri-extrusion. The product is virtually unbreakable with



PC FROST™ provides designers, specifiers and

architects with possibilities to use FROSTED

polycarbonate sheets in applications where a modern

and stylish look is required. The consistent high quality

demands from the market helps to improve machining

and thermoformability.

ALSO AVAILABLE:

In different transparent colours.

EXCELLENT FIRE PERFORMANCE. In case of fire, the

polycarbonate sheet will melt and allow venting where

heat and smoke will be let out and therefore reduce the

growth of fire by flame spread.

PC FROST™


PC FROST™ BENEFITS:

• Wide range of transparent colours


impact PMMA



APPLICATION AREAS:

Interior design, signs, displays and in other applications

where a high impact strength, good aesthetics and a

stylish look are needed.

DELIVERY PROGRAM:



Colour: colours upon request

Embossing: smooth


Version 2014-08-20






Physical properties













Thermal properties















POLYCARBONATE TECHNICAL SPECIFICATIONS

SAPHIR® is hard coated polycarbonate sheet with glass

like appearance suitable for flat applications. The high

impact strength of polycarbonate is combined with

improved weather and chemical resistance. The product

offers protection against abrasion compared to standard

plastic sheets.

SAPHIR® is resistant to many of the most common

chemicals, and the hard coat also provides an excellent

protection against graffiti and vandalism.

SAPHIR® weighs about half of standard glass, yet the

product is virtually unbreakable. SAPHIR® has an

outstanding clarity, the hard coat improves the light

transmission of the polycarbonate sheet.

ALSO AVAILABLE:

Double side coating, one side coating, any transparent

colour or tint.

SAPHIR®


SAPHIR® BENEFITS:

• Abrasion and Impact Resistant

• Chemical Resistance

• UV Stability

• High optical quality and outstanding clarity


impact PMMA

APPLICATION AREAS:

Anti-vandal glazing, security glazing, safety screens and

acoustic screens, Industrial equipment (machine

coverings, machine protections), Indoor and outdoor

signs, vending machine faces and many different kinds

of technical parts.

DELIVERY PROGRAM:



1 side or 2 sides coated


Version 2014-08-20






Physical properties













Thermal properties



Coating properties

Adhesion GT-0 DIN 53151 / ISO 1044

Taber Abrasion, CS 10F, 500g, 100 / 500 cycles 2 / <9 % Haze ASTM D 1044

1Taberhaze: Taber abrader, 500g load, CS 10F wheels, 500 cycles

SAPHIR® TECHNICAL SPECIFICATIONS

MAKROCLEAR™ HARDCOAT is a hard coated polycarbonate transparent sheet for flat applications. The high impact strength of polycarbonate is combined with a hard coating for flat applications, improved weatherability and chemical resistance and good protection against abrasion. MAKROCLEAR™ HARDCOAT has medium optical quality and is the choice when chemical resistance, scratch resistance and impact strength are more important than high optical clarity. MAKROCLEAR™ HARDCOAT is resistant to many of the most common chemicals, and the hard coat also provides an excellent protection against vandalism as paint and ink does not stick to the coated surface. ALSO AVAILABLE: Double side coating, one side coating, any transparent colour.

MAKROCLEAR™ HARDCOAT


MAKROCLEAR™ HARDCOAT BENEFITS:

•Abrasion and Impact Resistant

•UV Stability

•Chemical resistance

•More than 10 times the impact strength of high impact acrylic

APPLICATION AREAS:

Anti-vandal glazing, security glazing, safety screens and

acoustic screens, Industrial equipment (machine covers,

machine protections), Indoor and outdoor signs, vending

machine faces and many different kinds of technical

parts.

DELIVERY PROGRAM:



1 side or 2 sides coated

Special sizes and thicknesses on request.

Version 2015-09-05

Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com



Physical properties*




Mechanical properties*









Thermal properties*

Coefficient of linear thermal expansion (20-70 °C) 65x10-6 K-1 ISO 11359-2


Coating properties

Adhesion GT-0 ISO 1044

Taber Abrasion, CS 10F, 500g, 500 cycles <12 % Haze ASTM D 1044 1Taberhaze: Taber abrader, 500g load, CS 10F wheels, 500 cycles *Based on raw material data

MAKROCLEAR™ HARDCOAT TECHNICAL SPECIFICATIONS

Arla Plast MAKROTECH™ is a range of opaque coloured

polycarbonate sheets. The product is virtually

unbreakable with extremely high impact resistance.

The product offers high temperature performance too.

ALSO AVAILABLE IN:

• MAKROTECH™ CC for metallic colours

• MAKROTECH™ ECC for extra depth in metallic

colours

• With stripe applied for identification in packaging

industry

RECYCLING

Our total recycling concept (TRC), is a major advantage

in todays environmentally friendly market. The TRC

concept covers all types of sheets to provide you with

cost saving. Off-cuts from the sheets can be used in

production of new sheets by co-extruding virgin material

as the top layer. Care is taken that all quality

requirements are met.

MAKROTECH™

OPAQUE PRODUCTS – POLYCARBONATE SHEETS

MAKROTECH™ BENEFITS:

• Unique metallic colours


• Wide temperature range

APPLICATION AREAS:

Indoor flat, curved and formed parts in automotive,

agricultural, covers and containers.

DELIVERY PROGRAM:


Max width: 1450 mm


Colours: 14 standard colours and customer specific

colours upon request

Embossing: 00/00, 00/35, 00/40

Version 2014-08-20







Izod Impact, unnotched 4 mm -30 °C 10 kJ/m2 ISO 180/1U

Tensile elongation at yield (at break) 6 (100) % ISO 527

Flexural strength >90 % ISO 178

Elastic modulus 2300 MPa ISO 527

Flexural modulus 2300 MPa ISO 178

Izod notched impact strength +23 °C 60

Rockwell hardness M70 R-scale ISO 2039-2

Tensile strength at yield (at break) 60 MPa ISO 527

Izod impact strength unnotched at +23 °C NB ISO 180/1U

Physical properties


Thermal properties

Linear coefficient of thermal expansion (23-80 °C) 0,70 10-4 x K-1 ISO 2039-2

Vicat softening temperature B120 149 °C ASTM D 2220

Heat deflection temperature 132 °C DIN 53516

Fire properties

Flammability 1,6 mm HB Class UL 94

MAKROTECH™ TECHNICAL SPECIFICATIONS

Arla Plast MAKROTECH™ UV is a range of opaque

coloured polycarbonate sheets. The product is virtually

unbreakable with extremely high impact resistance. The

product offers high temperature performance too.

MAKROTECH™ UV is one side UV-protected sheet

which allows possibilities for outdoor applications.

ALSO AVAILABLE:

• Two side UV protection


industry

• MAKROTECH™ CC for metallic colours

• MAKROTECH™ ECC for extra depth in metallic colours

RECYCLING








MAKROTECH™ UV


MAKROTECH™ UV BENEFITS:

• UV protected topside

• Unique metallic colours



APPLICATION AREAS:

Outdoor flat, curved and formed parts for applications in

automotive, agricultural, covers and containers, wall

cladding, signage.

DELIVERY PROGRAM:


Max width: 1450 mm




Embossing: 00/00, 00/35, 00/40

Version 2014-08-20








Tensile elongation at yield (at break) % ISO 527

Flexural modulus >90 MPa ISO 178







Physical properties


Thermal properties

Coefficient of linear thermal expansion (23-80 °C) 0,70 10-4 x K-1 ISO 2039-2



Fire properties

Flammability 1,6 mm HB UL 94

MAKROTECH™ UV TECHNICAL SPECIFICATIONS

MAKROTECH™ MATT is coloured opaque polycarbonate

sheet. The product is produced with vast knowledge of

our production team experienced in producing mono, co

and tri-extrusion. The product is virtually unbreakable

with extremely high impact resistance. The product offers

high temperature performance.

MAKROTECH™ MATT provides designers, specifiers and

architects with possibilities to use opaque polycarbonate

sheets in applications where matt surface adds value and

also provides the classy look.

RECYCLING.








MAKROTECH™ MATT


MAKROTECH™ MATT BENEFITS:


• Usable over a wide temperature range

• Easy to thermoform

APPLICATION AREAS:

Outdoor for automotive, signage, advertising, street

furniture, building and construction, safety and security,

point of sale/purchase, cladding and decoration,

protection etc.

DELIVERY PROGRAM:


Max width: 1450 mm


Colours: black or others up on request

Embossing: 00/00, 00/35, 00/40

Version 2014-08-20







Tensile elongation at at break >50 % ISO 527

Tensile elongation at yield (at break) 6 % ISO 527

Flexural strength 90 MPa ISO 178


Izod impact, notched +23 °C 60 kJ/m2 ISO 180



Izod impact, unnotched 3 mm -30 °C d) 10 kJ/m2 ISO 180/1U

Physical properties


Thermal properties



Fire properties


MAKROTECH™ MATT TECHNICAL SPECIFICATIONS

Arla Plast MAKROTECH™ FR is a range of opaque




MAKROTECH™ FR is flame retardant sheet produced

with halogen free according to DIN VDE 472 part 815,

flame retardant additives. A yellow card on the base

material is also available on the UL website.

MAKROTECH™ FR


MAKROTECH™ FR BENEFITS:

• Flame retardant (halogen free)

• High impact resistance and virtually unbreakable


APPLICATION AREAS:

Flame retardant requirements (UL 94, oxygen index,

glow wire) for indoor flat, curved and formed applications

like electrical appliances, machine covers and

containers, luminaires.

DELIVERY PROGRAM:


Max width: 1450 mm




Embossing: 00/00, 00/35, 00/40

Version 2014-08-20







Tensile elongation at Yield (at break) 6(110) % ISO 527





Izod impact, unnotched 3 mm +23 °C d) NB kJ/m2 ISO 180/1U

Izod impact, unnotched 3 mm -30 °C d) NB kJ/m2 ISO 180/1U

Tensile Stress, break, 50 mm/min 65 MPa ISO 527

Tensile Strain, yield, 50 mm/min 6 % ISO 527

Tensile Modulus, 1 mm/min 2300 MPa ISO 527

Flexural Stress, yield, 2 mm/min 90 MPa ISO 178

Flexural Modulus, 2 mm/min 2300 MPa ISO 178

Hardness, H358/30 95 MPa ISO 2039-1

Charpy Impact notched 3 mm +23 °C 75 kJ/m2 ISO 179


Physical properties


Thermal properties



Thermal conductivity 7.E-0,5 W/m.K DIN 52612



Ball Pressure Test, 125 °C +/- 2 °C PASSES – ISO 180/1U

CTE, 23 °C to 80 °C, flow 0,2 W/m-°C ISO 8302

Ball Pressure Test, 125 °C +/- 2 °C PASSES – ISO 180/1U

Fire properties

UL 94 V-= Flame Class Rating 1,5 mm UL 94

UL 94 5VA Rating 3 mm UL 94

Glow Wire Flammability Inex 850 °C passes at 1 mm IEC 60695-2-12

Glow Wire Flammability Inex 960 °C passes at 1,6 Mm IEC 60695-2-12

Oxygen Index (LOI) 35 mm ISO 4589


Volume resistivity, dry >1.E+15 ? x cm IEC 60093

Oxygen Index (LOI) >1.E+15 ? IEC 60093

Oxygen Index (LOI) 0,001 IEC 60250

Oxygen Index (LOI) 17 kV/mm IEC 60243-1



Oxygen Index (LOI) 50/60 Hz 2,7 IEC 60250

Oxygen Index (LOI) 1 MHz 2,7 IEC 60250

MAKROTECH™ FR TECHNICAL SPECIFICATIONS

Arla Plast MAKROTECH™ FA is a range of opaque




MAKROTECH™ FA complies with food contact

regulations.

MAKROTECH™ FA


MAKROTECH™ FA BENEFITS:

• Food compliant sheet



APPLICATION AREAS:

The product is used in applications where food

compliance is required coupled with high temperature

performance.

Some applications include covers, containers, cladding,

agricultural equipment including flat curved and

formed parts.

DELIVERY PROGRAM:


Max width: 1450 mm


Colours: contact sales representative

Embossing: 00/00, 00/35, 00/40

Version 2014-08-20








Tensile elongation at yield (at break) 6 (110) % ISO 527




Izod notched impact strength -30 °C 10


Tensile strength at yield (at break) 63(70) MPa ISO 527


Physical properties


Thermal properties

Coefficient of linear thermal expansion (23-80 °C) 0,7 10-4 x K-1 ISO 2039-2



Fire properties


USA (FDA) Complies

MAKROTECH™ FA TECHNICAL SPECIFICATIONS

Arla Plast RPC is a range of opaque coloured

polycarbonate sheets. The product is virtually

unbreakable with extremely high impact resistance.

The product offers high temperature performance too.

RPC is mainly extruded in black colour for thermoforming

purposes. The sheet has a base regrind material which is

then covered with a co-extruded top layer as in our

MAKROTECH® range. Carbon black offers excellent UV

absorbance which projects the material for outdoor

applications. The product offers good cost savings versus

performance.

ALSO AVAILABLE IN:


industry

• With a colored co-extrusion layer

• With UV protection on top side

RPC


RPC BENEFITS:

• Environmental friendly with recycled core

• Good impact resistance


APPLICATION AREAS:

Indoor applications as flat, curved and formed parts

automotive agricultural, covers and containers.

DELIVERY PROGRAM:


Max width: 1450 mm


Colours: black

Embossing: 00/00, 00/35, 00/40

Version 2014-08-20






Tensile elongation at yield (at break) 6 % ISO 527

Tensile elongation at Break >50 % ISO 527

Flexural strength >90 MPa ISO 178





Tensile strength at yield (at break) 50 ISO 527


Physical properties


Thermal properties

Linear coefficient of thermal expansion (23-80 °C) 0,7 10-4 x K-1 ISO 2039-2



RPC TECHNICAL SPECIFICATIONS

MULTICLEAR® BOX 2 WALL is an aesthetically pleasing

twin wall extruded multiwall polycarbonate sheet which

offers higher light transmission products with lower

weight for handling and transportation.

MULTICLEAR® BOX 2 WALL is transparent and

translucent with one side UV protected sheet (also

available with two side UV protection, except 4-6 mm).

Standard colours are clear, opal and bronze. Available in

thicknesses of 4, 6, 8 and 10 mm.

Knife cutting operation is used both online and offline to

avoid saw dust.

MULTICLEAR® BOX 2 WALL has a 10 year limited

warranty against discolouration, loss of impact strength

and light transmission due to weathering.

ALSO AVAILABLE:

MULTICLEAR® HAMMER FINISH, MULTICLEAR®

SOLAR CONTROL (UV protected), MULTICLEAR® RPC,

MULTICLEAR® ULTRA.






MULTICLEAR®

BOX 2 WALL

MULTIWALL PRODUCTS – PC SHEETS

MULTICLEAR® BOX 2 WALL BENEFITS:

• High light transmission

• Excellent bending radius

• One side UV protection as standard

• Light weight - simple handling and installation

APPLICATION AREAS:

Building industry – roofing, cladding, sidewalls,


smoke vents, swimming pool covers, suspended

ceilings, glasshouses, shopping centre roofing,

railway/metro station, stadia roofing and partitions.

Lighting/packaging lamp optics and neon signs boxes,

pallet shields, protective covers for fragile items.

Advertising illuminated signs and advertising panels.

Agriculture greenhouses, lorry/tractor ports and


Version 2014-08-20

Arla Plast AB s.r.o. • Královský Vrch 1982 • CZ-432 01 Kadanˇ • Czech Republic Telefon +420 474 698 030 • Fax +420 474 698 040 • E-post: [email protected] • www.arlaplast.com


MULTICLEAR® BOX 2 WALL TECHNICAL SPECIFICATIONS


Physical properties



Moisture absorption 24 hours, 23 °C, 50% RH 0,15 %




Elastic modulus 2300 N/mm2 ISO 527

Flexural modulus 2300 N/mm2 ISO 178

Charpy unnotched impact strength +23 °C NB kJ/m2 ISO 179/2D

Charpy unnotched impact strength -40 °C NB kJ/m2 ISO 179/2D



Rockwell hardness M70 ISO 2039-2

Thermal properties

Linear coefficient of thermal expansion (23-80 °C) 0,7 10-4 x K-1





Specific heat capacity, Cp 1,17 kJ/kg.K


MULTICLEAR® BOX 3 WALL is an aesthetically pleasing

triple wall extruded multiwall polycarbonate sheet which

offers higher light transmission products with lower

weight for handling and transportation.



available with two side UV protection). Standard colours

are clear, opal and bronze. Available in thickness 16 mm.


avoid saw dust.




ALSO AVAILABLE:



MULTICLEAR® ULTRA.






.

MULTICLEAR®

BOX 3 WALL







APPLICATION AREAS:











Version 2014-08-20





Physical properties














Thermal properties








MULTICLEAR® BOX 7 WALL is a seven wall extruded

multiwall polycarbonate sheet offering low U-value with

excellent light transmission The range offers high impact

strength with lower weight for handling and

transportation.



available with two side UV protection). Standard colours

are clear, opal and bronze. Available in thicknesses

16 and 20 mm.





avoid saw dust.

ALSO AVAILABLE:



MULTICLEAR ULTRA






MULTICLEAR®

BOX 7 WALL







APPLICATION AREAS:











Version 2014-08-20





Physical properties














Thermal properties








MULTICLEAR® HAMMER FINISH is a textured multiwall

polycarbonate sheet which has special aesthetic

appearance. The product has been designed to provide

an alternative�to architects or specifiers who would like

to maintain the light transmission whilst allowing

maximum diffusion of light without tinting the product.

The spread of light is even and the surface is textured on

the inner layer. Light diffusion and transmission are much

better than standard tinted products. Good cleanability

and appearance with light diffusion and diffraction hides

dirt or marks on the sheet.

MULTICLEAR® HAMMER FINISH has one side UV

protected sheet as standard (also available with two side

UV protection). Standard colours are opal, white and

bronze. Other colours are available. Thicknesses from 8

mm upwards for the whole MULTICLEAR® range.

MULTICLEAR® HAMMER FINISH has a 10 year limited



ALSO AVAILABLE:

MULTICLEAR® HAMMER FINISH is available for the

whole MULTICLEAR® range.






MULTICLEAR®

HAMMER FINISH


MULTICLEAR® HAMMER FINISH BENEFITS:





APPLICATION AREAS:

Where aesthetics are required and privacy is needed.

Version 2014-08-20





Physical properties














Thermal properties








MULTICLEAR® HAMMER FINISH TECHNICAL SPECIFICATIONS

MULTICLEAR® LIGHT is an 8 wall extruded multiwall

polycarbonate sheet. The product offers increased light

transmission and light weight for an 8 layer product.

MULTICLEAR® LIGHT also offers cost saving by using

less electricity for lighting, excellent thermal insulation

and lower weight per/kg. The product offers outstanding

aesthetic quality replacing glass and other plastics in

continuous glazing applications.

MULTICLEAR® LIGHT is transparent or translucent with

one side UV protected sheet. Standard colours are clear,

opal and bronze. Available in thicknesses 25, 32, and 40

mm.

MULTICLEAR® LIGHT has a 10 year limited warranty

against discolouration, loss of impact strength and loss of

light transmission due to weathering.

ALSO AVAILABLE:


SOLAR CONTROL (UV protected), MULTICLEAR® RPC.






MULTICLEAR® LIGHT


MULTICLEAR® LIGHT BENEFITS:

• Good light transmission

• Excellent thermal insulation

• More than 10 times the impact strength of PMMA

• More than 4 times the impact strength of PVC

• Light weight – simple handling and installation

APPLICATION AREAS:








Advertising – illuminated signs and advertising panels.

Agriculture – greenhouses, lorry/tractor ports and


Version 2015-02-03



MULTICLEAR® LIGHT TECHNICAL SPECIFICATIONS


Physical properties














Thermal properties








MULTICLEAR® LIGHT

16 & 20 mm

MULTICLEAR® LIGHT is an 8 wall extruded multiwall

polycarbonate sheet with wide channel. The product

offers increased light transmission with very light weight

for an 8 layer product allowing cost saving by using less

electricity for lighting, excellent thermal insulation and

lower weight per kg. Outstanding aesthetic quality

replacing glass and other plastics in continuous glazing

applications.

MULTICLEAR® LIGHT is transparent or translucent with

one side UV protected sheet. Standard colours are clear,

opal and bronze. Available in thicknesses 25, 32, 35 and

40 mm.

MULTICLEAR® LIGHT has a 10 year limited warranty

against discolouration, loss of impact strength and light

transmission due to weathering.

ALSO AVAILABLE:

MULTICLEAR® (hammer finish), MULTICLEAR® SOLAR

CONTROL (heat reducing), MULTICLEAR® RPC.







MULTICLEAR® LIGHT BENEFITS:

• Good light transmission




• Light weight – simple handling and installation

APPLICATION AREAS:








Advertising – illuminated signs and advertising panels.



Version 2014-08-20

20 mm



MULTICLEAR® LIGHT 16 & 20 MM TECHNICAL SPECIFICATIONS


Physical properties














Thermal properties








MULTICLEAR® LIGHT – LIGHT TRANSMISSION

%

Thickness mm Clear Opal

16 63 45

20 58 45 MULTICLEAR® LIGHT 8 WALL LIGHT 16 mm LIGHT 20 mm

Width of the sheet mm 600 625 980 1250 600 625 980 1250

Load N/m2 Length of the sheets mm

500 >6000 >6000 >6000 2700 >6000 >6000 >6000 3200

750 >6000 >6000 2800 2000 >6000 >6000 3600 2300

900 >6000 >6000 2300 1800 >6000 >6000 2775 2050

1200 >6000 >6000 1950 1650 >6000 >6000 2150 1775

1500 4600 3800 1700 1425 >6000 >6000 1950 1575

2000 2500 2300 1500 1300 3200 2800 1600 1250

Minimum Bending Radius LIGHT 16 mm: 2800 min. LIGHT 16 mm: 3500 min.

MULTICLEAR® RPC is a polycarbonate sheet

extruded primarily from regrind polycarbonate. With

MULTICLEAR® RPC you will get a product with high

impact strength and high temperature resistance.

MULTICLEAR® RPC is suitable for outdoor applications.

The RPC sheet can bet protected against UV on the top

side. To widen the use the RPC sheet can be offered in

black multiwall structure with one co-extruded side. The

product can also be produced with BOX 2W, BOX 3W

and STRONG structures. Multiclear RPC can be

coloured and available in varying thicknesses.

ALSO AVAILABLE:


SOLAR CONTROL (UV protected).






.

MULTICLEAR® RPC MULTIWALL PRODUCTS – PC SHEETS

MULTICLEAR® RPC BENEFITS:

• Lower costs than standard polycarbonate materials



• One side UV as standard

APPLICATION AREAS:

Internal partitions, soundproofing, hospital room privacy

partitions, farmhouse partitions and roofing, furniture

parts. Ideal for cladding, transport boxes and packaging.

Version 2014-08-20



MULTICLEAR® RPC TECHNICAL SPECIFICATIONS


Physical properties














Thermal properties








MULTICLEAR® SOLAR CONTROL GREY is an extruded

multiwall polycarbonate sheet which stops heat build up.

It provides pleasant ambiance by allowing greater light

transmission compared to standard tinted products whilst

keeping the infra-red heat out. The spread of light is even

and the surface is textured on the inner layer. The grey

and silver combination of colour provides an aesthetically

pleasing product once glazed whilst needing lesser

frequency for cleaning due to its colour or effect.

MULTICLEAR® SOLAR CONTROL GREY has one side

UV protected sheet as standard (also available with two

side UV protection).


requirements to EN 13501-1. In case of fire, the sheet will

melt and allow venting where heat and smoke will be let

out and therefore reduce the growth of fire by flame

spread.

MULTICLEAR® SOLAR CONTROL GREY has a 10 year

limited warranty against discolouration, loss of impact

strength and light transmission due to weathering.

MULTICLEAR® SOLAR CONTROL GREY


MULTICLEAR® SOLAR CONTROL BENEFITS:

• Keeping the infra-red heat out



• Good cleanability and appearance

APPLICATION AREAS:

Suitable for applications where solar heat reduction is

needed.








Version 2015-02-03



MULTICLEAR® SOLAR CONTROL GREY COMPARISON


Physical properties














Thermal properties








PRODUCT MULTICLEAR® STRONG

10 mm 10 mm 10 mm 16 mm 16 mm 16 mm

Clear Opal SC Grey Clear Opal SC Grey

Shading coefficient SC 0,74 0,70 0,42 0,76 0,63 0,31

Total solar energy transmittance g (%) 65% 61% 37% 65% 55% 27%

Light transmittance Ty (%) 64% 44% 25% 60% 30% 15%

Direct solar transmittance Te (%) 59% 55% 24% 59% 47% 14%

Direct solar reflectance Re (%) 23% 26% 30% 19% 23% 27%

MULTICLEAR® SOLAR CONTROL TRANSPARENT is

an extruded multiwall polycarbonate sheet which stops

heat build up. Transparent provides pleasant ambiance

by allowing greater light transmission compared to

standard tinted products whilst keeping the infra-red heat

out. The spread of light is even and the surface is

textured on the inner layer. Good cleanability and

appearance

MULTICLEAR® SOLAR CONTROL TRANSPARENT has

one side UV protected sheet as standard.


requirements to EN 13501-1. In case of fire, the sheet will

melt and allow venting where heat and smoke will be let

out and therefore reduce the growth of fire by flame

spread.

MULTICLEAR® SOLAR CONTROL TRANSPARENT has

a 10 year limited warranty against discolouration, loss of

impact strength and light transmission due to weathering.

MULTICLEAR® SOLAR CONTROL TRANSPARENT


MULTICLEAR® SOLAR CONTROL BENEFITS:

• Keeping the infra-red heat out



• Good cleanability and appearance

APPLICATION AREAS:

Suitable for applications where solar heat reduction is

needed.








Version 2015-02-03



MULTICLEAR® SOLAR CONTROL TRANSPARENT COMPARISON


Physical properties














Thermal properties








PRODUCT MULTICLEAR® STRONG

10 mm 10 mm 10 mm 16 mm 16 mm 16 mm

Clear Opal SC Grey Clear Opal SC Grey

Shading coefficient SC 0,74 0,70 0,42 0,76 0,63 0,31

Total solar energy transmittance g (%) 65% 61% 37% 65% 55% 27%

Light transmittance Ty (%) 64% 44% 25% 60% 30% 15%

Direct solar transmittance Te (%) 59% 55% 24% 59% 47% 14%

Direct solar reflectance Re (%) 23% 26% 30% 19% 23% 27%

MULTICLEAR® STRONG is an range of extruded

multiwall polycarbonate sheet specifically designed to

offer increased stiffness allowing cost saving by using

less glazing bars for installations hence increased light

transmittance.

MULTICLEAR® STRONG is transparent and translucent

with one side UV protected sheet (also available with two

side UV protection). Standard colours are clear, opal and

bronze. Available in thicknesses 10, 16, 20 and 25 mm.

Lower weight products are available for 16 and 25 mm.


avoid saw dust.

MULTICLEAR® STRONG has a 10 year limited warranty

against discolouration, loss of impact strength and light

transmission due to weathering.

ALSO AVAILABLE:








.

MULTICLEAR®

STRONG


MULTICLEAR® STRONG BENEFITS:



• Cross structure offering greater stiffness

• Good thermal insulation

APPLICATION AREAS:











Version 2014-08-20



MULTICLEAR® STRONG TECHNICAL SPECIFICATIONS


Physical properties














Thermal properties








MULTICLEAR® STRONG ULTRA 25/5 is an extruded

5 wall polycarbonate sheet designed to offer better

stiffness than standard weight products (the impact

strength is at quarter of the weight of glass of equivalent

thickness). The sheet offers increased impact resistance

by using cross structure and more material. The ribs are

optimised to improve the stiffness. The system is cost

saving by using less glazing bars for installations hence

increased light transmittance.

MULTICLEAR® STRONG ULTRA is transparent and


available with two side UV protection). Standard colour

is opal. Available in thickness 25 mm.

MULTICLEAR® STRONG ULTRA has a 10 year limited



ALSO AVAILABLE:








.

MULTICLEAR®

STRONG ULTRA 25/5


MULTICLEAR® STRONG ULTRA 25/5

BENEFITS:

• Less structural glazing bars hence increased

light transmission

• Cross structure offering greater stiffness

• High wind and snow loading capacity


APPLICATION AREAS:









Agriculture greenhouses, lorry/tractor ports and farm/

barn buildings.

Version 2014-08-20



MULTICLEAR® STRONG ULTRA 25/5 TECHNICAL SPECIFICATIONS


Physical properties














Thermal properties








ATECH is a series of sheets based on ABS which is a raw

material with very high impact-strength. ABS also has

impressive thermal qualities and is easy to thermoform and

fabricate. ATECH 3000 is a super high impact ABS with a

semigloss surface that thermoforms quickly and effectively.

ALSO AVAILABLE IN:

• ATECH 3003 has extra UV stabilizers added to improve

weather resistance

• ATECH 3000 FA is a food compliant product version

• Stripes for identification purpose

• Dual colouring to optimize to your need

RECYCLING

Our total recycling concept (TRC), is a major advantage in

todays environmentally friendly market. The TRC concept

covers all types of sheets to provide you with cost saving.

Off-cuts from the sheets can be used in production of new

sheets by co-extruding virgin material as the top layer.

Care is taken that all quality requirements are met.

ATECH® 3000

OPAQUE PRODUCTS – ABS SHEETS

ATECH® 3000 BENEFITS:



• Good thermal qualities

APPLICATION AREAS:

In general where a high impact strength material is

needed like machine covers, high demanding general

purpose & indoor applications.

DELIVERY PROGRAM:


Max width: 1750 mm




Embossing: 00/00, 00/30, 00/35, 00/38, 00/40, 00/42,

00/45, 00/50, 00/57 00/60

Version 2014-08-20





Physical properties



Tensile strength at yield 33 MPa ISO 527

Tensile elongation at yield >2 % ISO 527

Tensile elongation at break 55 % ISO 527

Elastic modulus in tension 1900 MPa ISO 527




Izod impact, unnotched -18 °C 20 kJ/m2 ISO 180


Ball intendation hardness 77 MPa ISO 2039

Thermal properties


Vicat softening temperature B120 97 °C ISO 306

Heat deflection temperature HDT-A 86 °C ISO 75

Mould shrinkage 0,6 – 0,7 % ISO 294-4

ARTECH® 3000 TECHNICAL SPECIFICATIONS




fabricate. The ATECH 3100 is a super high impact matt

ABS which remains matt after thermoforming.

ALSO AVAILABLE IN:

• ATECH 3103 has extra UV stabilizers added to improve

weather resistance

• ATECH 3110 with the matt surface on both sides

• Dual colouring to optimize to your needs

RECYCLING







ATECH® 3100



• Supermatt surface finish after thermoforming




APPLICATION AREAS:

Suitable for demanding automotive parts which are

exposed to secondary UV light, and other tough

industrial applications where a supermatt finish is

required.

DELIVERY PROGRAM:


Max width: 1750 mm




Embossing: 00/00, 00/30, 00/35, 00/38, 00/40, 00/42,

00/45, 00/50, 00/57 00/60

Version 2014-08-20





Physical properties













Thermal properties

Linear coefficient of thermal expansion (20-70 °C) K-1 ISO 11359-2








fabricate. The ATECH 3200 is a super high impact ABS

with a top layer of high gloss PMMA (acrylic).

ALSO AVAILABLE IN:

• ATECH 3203 with extra UV stabilization added in ABS to

improve weather resistance (3-5y)

• ATECH 3206 with extra UV stabilization added in ABS

and PMMA (10y)

• Optional with different structures to combine the high

gloss surface

• Dual colouring to optimize to your need

RECYCLING







ATECH® 3200



• Super high gloss surface finish

• Different stages of weathering performance solutions




APPLICATION AREAS:

Suitable for demanding external automotive component

parts which are exposed to UV light, and other tough

industrial applications where a high gloss finish is

required.

DELIVERY PROGRAM:


Max width: 1750 mm


Colours: Standard colours and customer specific colours

upon request

Embossing: 00/00, 00/35, 00/38, 00/40, 00/50, 00/60

Version 2014-08-20





Physical properties













Thermal properties










with a semigloss top layer of ASA material.

ALSO AVAILABLE IN:

• ATECH 3300M with a matt ASA surface

• ATECH 3330 with ASA surface on both sides

RECYCLING







ATECH® 3300



• Weathering performance

• Chemical resistance




APPLICATION AREAS:

The weathering properties makes ATECH 3300 the

ultimate choice for any outdoor application such as

gardening applications, agriculture vehicles, transport

vehicles etc.

DELIVERY PROGRAM:


Max width: 1650 mm


Colours: Standard colours and customer specific


Embossing: 00/00, 00/30, 00/35, 00/38, 00/40, 00/42,

00/45, 00/50, 00/57 00/60

Version 2014-08-20





Physical properties













Thermal properties










with a matt colored PMMA top layer.

ALSO AVAILABLE IN:

• ATECH 3400GC Gloss control range with a gloss level to

meet your requirements

• ATECH 3440 with matt PMMA surface both sides

RECYCLING







ATECH® 3400






APPLICATION AREAS:

The great weathering properties and gloss cha-

racteristics makes ATECH 3400 series suitable for both

indoor and outdoor applications. For example;

advertising, building & construction, industrial machines,

automotive etc.

DELIVERY PROGRAM:


Max width: 1750 mm


Colours: Black and customer specific colours upon

request

Embossing: 00/00, 00/30, 00/35, 00/38, 00/40, 00/42,

00/45, 00/50, 00/57 00/60

Version 2014-08-20





Physical properties




Tensile elongation at yield % ISO 527



Flexural strength MPa ISO 178

Flexural modulus MPa ISO 178


Izod impact, unnotched -18 °C kJ/m2 ISO 180


Ball intendation hardness MPa ISO 2039

Thermal properties


Vicat softening temperature B120 °C ISO 306







fabricate. The A3700 is a super high impact ABS with a soft

touch, super matt, UV stabilized, thermoplastic elastomer

on the top surface that is UV stabilized.

CLEANING RECOMMENDATIONS

• ATECH Use dry clean air to blow off dust

• Use a mild soap solution or a slightly acidic or alkaline �

detergent

• Methanol and ethanol can be used in moderate �

concentrations and short term use

• Always rinse with clean lukewarm water

• Use lint free synthetic cloths or sponges similar

to chamois

ATECH® 3700



• Softtouch feeling with high friction

• Good weathering performance

• Supermatt after thermoforming


• High impact strength�


APPLICATION AREAS:

The great weathering properties and surface

characteristics makes ATECH 3700 series suitable for

both indoor and outdoor applications. For example;

industrial machines, packaging, automotive etc.

DELIVERY PROGRAM:


Max width: 1500 mm


Colours: Standard colours in black and grey and

customer specific colours upon request

Embossing: 00/45, other upon request

Version 2014-08-20





Physical properties




Tensile elongation at yield % ISO 527



Flexural strength MPa ISO 178

Flexural modulus MPa ISO 178


Izod impact, unnotched -18 °C kJ/m2 ISO 180


Ball intendation hardness MPa ISO 2039

Thermal properties


Vicat softening temperature B120 °C ISO 306




ATECH® 5100 is PC/ABS sheet coextruded with Matt ABS

layer. The product offers good impact strength and wide

working temperature range. ATECH® 5100 has good

chemical resistance to most common chemicals and offers

better fire performance than ABS.

ALSO AVAILABLE IN:

• ATECH 5103 with extra UV stabilizers added to improve

weather resistance

• ATECH 5110 with the matt surface on both sides

RECYCLING







ATECH® 5100

OPAQUE PRODUCTS – PC/ABS SHEETS


• Matt surface finish after thermoforming




APPLICATION AREAS:

Suitable for demanding automotive parts which are

exposed to secondary UV light, and other tough

industrial applications where a supermatt finish is

required.

DELIVERY PROGRAM:


Max width: 1450 mm


Colours: black and customer specific colours

upon request

Embossing: 00/00, 00/40, 00/50

Version 2014-08-20






Tensile strength at Break 55 MPa ISO 527

Tensile elongation at Break 50 % ISO 527

Flexural Strength 73 MPa ISO 178

Izod Impact, unnotched 4 mm +23 °C NB kJ/m2 ISO 180/1U

Izod Impact, unnotched 4 mm -30 °C NB kJ/m2 ISO 180/1U

Izod Impact, notched 3 mm +23 °C 40 kJ/m2 ISO 180/1A

Izod Impact, notched 3 mm -23 °C 32 kJ/m2 ISO 180/1A

Ball indentation hardness (H-35.8/30) 87 MPa ISO 2039/1



Physical properties


Thermal properties

Vicat B/120 125 °C ISO 306

HDT A 1,80 MPa 110 °C ISO 75

Fire properties

Flammability 1,6 mm Class HB UL 94

Flammability 3,0 mm < 5 mm/min US-FMVSS 302


TPE (TPO) – The O8000-13 is a thermoplastic elastomer

(TPE) which is polyolefin (PP) based, hence also named

thermoplastic polyolefin (TPO). It combines the high impact

strength of elastomers with the stability and processability

of a thermoplastic material. The sheets are easy to thermo-

form and to fabricate. The material can be recycled like all

thermoplastic materials.

ALSO AVAILABLE IN:

• O8003-13, with a UV stability package that makes it

suitable for outdoor use applications.

RECYCLING







O8000-13 TPE (TPO)

OPAQUE PRODUCTS – TPE (TPO) SHEETS

O8000-13 TPE (TPO) BENEFITS:

• Very high impact strength at low temperatures

• Good chemical and abrasion resistance

• Good noise damping properties

• Easy thermoforming

• Good weathering performance with UV

stabilized version

APPLICATION AREAS:

Thermoformed parts for very tough outdoor automotive

applications.

DELIVERY PROGRAM:


Max width: 1250 mm others upon request


Colours: Black and grey, others upon request

Embossing: 00/00, 00/35, 00/40, 00/55

Version 2014-08-20






Izod impact, notched +23°C 65 KJ/m2 ISO 180


Elongation at break 300 % ISO 527

Tensile Stress at yield 19 MPa ISO 527

Izod Impact, notched -23°C 60 KJ/m2 ISO 180/1A

Charpy Impact, notched +23°C 60 KJ/m2 ISO 179-1eA

Charpy Impact, notched -20°C 8 KJ/m2 ISO 179-1eA

Physical properties


Thermal properties

Vicat softening temperature 135 °C ISO 306

O8000-13 TPE (TPO) TECHNICAL SPECIFICATIONS

TPE (TPO) – The O8010 is a mineral modified

thermoplastic elastomer (TPE) which is polyolefin (PP)

based, hence also named thermoplastic polyolefin (TPO). It

combines the high impact strength of elastomers with the

stability and processability of a thermoplastic material. The

sheets are easy to thermoform and to fabricate. The

material can be recycled like all thermoplastic materials.

ALSO AVAILABLE IN:

• O8013, with a UV stability package that makes it


RECYCLING







O8010 TPE/TPO


O8010 TPE /TPO BENEFITS:

• Mineral modified for improved properties

• Very high impact strength at low temperatures

• Good chemical and abrasion resistance

• Good noise damping properties


• Good weathering performance with UV

stabilized version

APPLICATION AREAS:


applications.

DELIVERY PROGRAM:




Colours: Black and grey, others upon request

Embossing: 00/00, 00/35, 00/40, 00/55

Version 2014-08-20






Izod impact, notched +23°C 65 KJ/m2 ISO 180

Elongation at yield (at break) 300 % ISO 527

Flexural modulus 1200 % ISO 178

Charpy unnotched impact strength +23 °C No break MPa ISO 179

Tensile strength at yield (at break) 21 KJ/m2 ISO 527

Izod impact strength -20 °C, notched 34 KJ/m2 ISO 180

Charpy Impact, notched 3 mm +23 °C 64 KJ/m2 ISO 179

Charpy Impact Strength -20 °C 8 ISO 179

Physical properties


Thermal properties

Vicat softening temperature 138 °C ISO 306

O8010 TPE/TPO TECHNICAL SPECIFICATIONS

TPE (TPO) – The O8030-13 is a thermoplastic elastomer

(TPE) which is polyolefin (PP) based, hence also named

thermoplastic polyolefin (TPO). It combines the high impact

strength of elastomers with the stability and processability

of a thermoplastic material. The sheets are easy to thermo-

form and to fabricate. The material can be recycled like all

thermoplastic materials.

ALSO AVAILABLE IN:

• O8033, with a UV stability package that makes it


RECYCLING







O8030 TPE/TPO


O8030 TPE/TPO BENEFITS:

• Mineral modified for improved properties

• High stiffness

• High Impact strength

• Good temperature resistance

• Good moisture barrier resistance

• Good chemical resistance

• Low and stable mould shrinkage

APPLICATION AREAS:


applications.

DELIVERY PROGRAM:




Colours: Black, others upon request

Embossing: 00/00, 00/35, 00/40, 00/55

Version 2014-08-20








Charpy Impact strength -20 °C, notched 6,5 KJ/m2 ISO 179

Charpy Impact Strength 0 °C, notched 15,5 KJ/m2 ISO 179

Charpy Impact Strength +23 °C, notched 52 kJ/m2 ISO 179

Elongation at break 85 % ISO 527

Physical properties


Thermal properties

Vicat softening temperature 10 N 131 °C ISO 306

O8030 TPE/TPO TECHNICAL SPECIFICATIONS

GRIPHEN® FROST is high impact transparent sheet with

frosty look on each side. The product is easy to fabricate

and thermoform without pre-drying offering faster cycle

times hence cost saving. The product offers high definition

on thermoforming. The product can be used

in point of sale and point of purchase applications.

GRIPHEN® FROST retains frosty look after thermoforming.

GRIPHEN® FROST also offers excellent colour range.

ALSO AVAILABLE:

GRIPHEN® UV, (UV protected), GRIPHEN® COLOUR

(transparent and opal colours), GRIPHEN® COLOUR UV

(transparent colours with UV protection)

GRIPHEN® FROST

TRANSPARENT PRODUCTS – PETG SHEETS

GRIPHEN® FROST BENEFITS:

• Unique frosty look


• Cost effective - no pre-drying required when

thermoforming


impact PMMA

APPLICATION AREAS:

Solutions in interior design, displays, indoor illuminated

signs, showcases applications and exclusive design

accessories.

DELIVERY PROGRAM:

Standard size: 1250 x 2050 mm, 2050 x 3050 mm


Colour: Clear and FROST colours

Version 2014-08-20






Physical properties





Tensile strength at break 55 MPa ISO 527




Charpy unnotched impact strength +23 °C NB kJ/m2 ISO 179/1eU

Izod notched impact strength +23 °C 11,5 kJ/m2 ISO 180/1A

Izod notched impact strength -30 °C 4,4 kJ/m2 ISO 180/A

Rockwell hardness R115 R-scale ISO 2039-2

Tensile strength at yield (at break) N/mm2 ISO 527

Thermal properties

Linear coefficient of thermal expansion (23-70 °C) 51x10-4 K1 ISO 11359-2





Volume resistivity, dry 1016 Ω x cm IEC 60093





GRIPHEN® FROST TECHNICAL SPECIFICATIONS

GRIPHEN® is high impact transparent sheet. The product

is easy to fabricate and thermoform without pre-drying

offering faster cycle times hence cost saving. The product

offers high definition on thermoforming and clarity on cold

and hot bending. The product can be used in point of sale

and point of purchase applications,

GRIPHEN® FDA can be used for applications where food

contact is required. GRIPHEN® also offers excellent colour

range, UV protected product and also the unique frosty

(satin) look

ALSO AVAILABLE:

GRIPHEN® UV, (UV protected), GRIPHEN® COLOUR

(transparent and opal colours), GRIPHEN® COLOUR UV

(transparent colours with UV protection) GRIPHEN®

FROST (anti reflex frost surface)

GRIPHEN®

TRANSPARENT PRODUCTS – PETG SHEETS

GRIPHEN® BENEFITS:

• Very easy to thermoform and no pre drying

needed

• Food contact approval

• Outstanding high clarity and surface quality

• GRIPHEN® has more than 2 times the impact

strength of high impact PMMA


APPLICATION AREAS:

Indoor and outdoor signs, shelving and racking systems,

food displays/bin/dividers, thermoformed covers, vending

machine faces, medical equipment (packaging etc),

industrial equipment (machine coverings, machine

protections and many different kinds of technical parts).

DELIVERY PROGRAM:

Standard size: 1250 x 2050 mm, 2050 x 3050 mm


Colour: Clear and Transparent colours

Version 2014-08-20






Physical properties





Tensile strength at break 55 MPa ISO 527




Charpy unnotched impact strength +23 °C NB kJ/m2 ISO 179/1eU

Izod notched impact strength +23 °C 11,5 kJ/m2 ISO 180/1A

Izod notched impact strength -30 °C 4,4 kJ/m2 ISO 180/A

Rockwell hardness R115 R-scale ISO 2039-2

Tensile strength at yield (at break) N/mm2 ISO 527

Thermal properties

Linear coefficient of thermal expansion (23-70 °C) 51x10-4 K1 ISO 11359-2





Volume resistivity, dry 1016 Ω x cm IEC 60093





GRIPHEN® TECHNICAL SPECIFICATIONS

GRIPHTECH® is an opaque coloured copolyester sheet

which combines extremely good fabrication and thermo-

forming properties with good impact strength. The product

has good fire performance, self-extinguishable and also low

smoke generation (during a fire).

ALSO AVAILABLE IN:

• UV protected optional

• Frost surface optional

• Recycled in black optional

• Food compliant version

GRIPHTECH®

OPAQUE PRODUCTS – PETG SHEETS

GRIPHTECH® BENEFITS:

• No predrying needed before thermoforming

• Easy to achieve high definitions with sophisticated

shapes at thermoforming

• Fast cycle times in thermoforming

• Good fire properties


APPLICATION AREAS:

Indoor and outdoor, shelving and racking systems, food

displays/bin/dividers, thermoformed covers, vending

machine faces, medical equipment (packaging etc),

industrial equipment (machine coverings, machine

protections and many different kinds of technical parts).

DELIVERY PROGRAM:


Max width: 2050 mm


Colours: Standard colours, customer specific colours

upon request

Embossing: 00/00

Version 2014-08-20






Elongation at yield (at break) 4,7 (40) % ISO 527

Elastic modulus 2200 % ISO 527

Tensile strength at yield (at break) 53 (26) MPa ISO 527

Izod impact, unnotched 3 mm +23 °C d) NB* kJ/m2 ISO 180/1U

Izod Impact, unnotched 3 mm -30 °C d) NB* kJ/m2 ISO 180/1U

Physical properties


Thermal properties

HDT A 1,80 Mpa 68 °C ISO 75

Vicat B 5 kg 78 °C ISO 306

Coefficient of linear thermal expansion 6,8x10-5 mm/mK ASTM D696


Volume resistivity, dry 1016 ? x cm IEC 60093

Surface resistivity, dry 1015 ? IEC 60093


Fire and smoke performance

Flammability 4 mm Class V2C) ** UL 94

Flammability 3 mm (UL listed raw material) Class V2C) ** UL 94

* = Internal test�** = Indicative testing only (UI file available for resin used)

GRIPHTECH® TECHNICAL SPECIFICATIONS

Arla Plast AB • Västanåvägen • SE-590 30 Borensberg • Sweden • Phone + 46 141 20 38 00 • Fax + 46 141 414 30 • E-post: [email protected]

Arla Plast s.r.o. • Královský Vrch 1982 • CZ-432 01 Kadan • Czech Republic • Phone + 420 474 698 030 • Fax + 420 474 698 040 • E-mail: [email protected]

)

plastic sheets for your needs data sheets - … · the consistent high quality demands from the...

Documents