plaster profiles and accessories - isomaster.dk · in the manufacturing of plaster profiles (mesh...
TRANSCRIPT
PLASTER PROFILES AND ACCESSORIES FOR PLASTERING AND CONCRETING
GENERAL INTRODUCTION
Plaster profilesApplicationPlaster profiles and accessories applicable during the process of plastering are essential materials in the economical construction of traditional cement, lime and gypsum plasters, since their use plays an important role in the satisfaction of demands and requirements made on plasters, while the great variety of materials and sizes also facilitates their application in many areas.
Compatibility:Galvanized steel profiles (only with protective tiling in humid spaces): applicable to cement, lime-cement and lime plastersAluminium and PVC profiles: in gypsum and in rendering of external thermal insulation systems
Method of installation:Installing the profiles is simple. In case of traditional lime and cement plasters, the galvanized steel edge plaster profiles are to be fixed and levelled with the help of profile fixing mortar (both for interior and exte-rior use). After that, beads are set up with the help of strings stretched between the edge profiles. The window connecting profile must be installed at the jointing point of the plaster and the window or door frame. In case of gypsum-based plasters, the fastening of the profiles can be performed with the plastering mate-rial, but in exterior or in humid rooms – where lime-cement plaster is applied – gypsum-based materials must not be used for profile attachment.We provide a wide selection of the higher-priced and higher-quality Protektor products, a leading company in the manufacturing of plaster profiles (mesh accessories of heat insulation systems for façades, edge plaster profiles for interior and exterior use, as well as base-, base extension-, plaster finishing-, and dilata-tion profiles).
Advantages:With the application of these profiles, approx. 20-30% of the quantity of plaster can be saved, since the With the application of these profiles, approx. 20-30% of the quantity of plaster can be saved, since the desired plaster thickness can be exactly adjusted, applying less material reduces costs, shortens the time of con-struction and at the same time accelerates the drying of the plaster layer.They provide protection at the most vulnerable points of the thin plaster layer, along corners and edges, while making possible the proper finishing of plastered surfaces, and when connecting to other materials – e.g. door and window frames – they provide a watertight and cracking-free connection, and the necessary dilatation for broad surfaces.
Some good adviceThe galvanized steel profiles must not be cutted by an angle-grinder because the zinc layer can easily dam-aged, which results in the corrosion of the profiles.
2 MASTERPLAST GROUP INTERNATIONAL
PLASTER PROFILES AND ACCESSORIES
Accessories for plaster and concrete works
Profile fixing mortar is a powder mix available in bags which serves for the fastening of the plaster profiles.The metal mesh and glass fibre mesh (so called rabitz-meshes) are also proper for the reinforcement of traditional plasters, while also increasing their strength and reducing the extent of shrinkage cracks. Internal fiberglass mesh also fulfils these requirements, embedded in the finishing layer of internal plastering.MASTERPOL lime substitute additive when given to the mortar makes the mixture easy to shape without the application of lime and reduces the quantity of the required mixing water. MASTERFROST set accelerating admixture for concrete and mortar ensures that the concrete sets without damaging in cold weather, up to a (–) 5°C air temperature, along with the necessary thickness and safety actions.It is also advisable to use MASTERFIBER fibre additive made of polypropylene to water-setting build-ing materials, since these, when added to different kinds of mortar and concrete, improves the mechanical properties of those.
3MASTERPLAST GROUP INTERNATIONAL
PLASTER PROFILES AND ACCESSORIES
To be kept indoors, in a dry place, protected from rain
Fragile
Protected against atmospheric exposure, espe-cially sun-radiation and other heat sources
Technical and Safety Data Sheet
Product Description
Expiry date: 1 year from production
Frost hazard
Icons
4MASTERPLAST GROUP INTERNATIONAL
PLASTER PROFILES
Angle bead for internal plastering PLUS
Angle bead for internal plastering
Depth gauge bead: 6 or 10 mm
Material: Hot-dip coated steelApplication: Intended to be used to improve the protection of the corners and also provide features to the internal cement or lime plastering of the construction.
Technical data: Width of profile: 34 × 34 mm;
Interior edge plaster profile Available Code
2.75 m 2.75 m/pc, 25 pcs/bundle 0801-00275000
3 m 3 m/pc, 25 pcs/bundle 0801-00300000
Material: Hot-dip coated steelApplication: Intended to be used to improve the protection of the corners and also provide features to the internal cement or lime plastering of the construction. The enhanced edge and wings of the profile increase the stiffness. Technical data: Width of profile: 34 × 34 mm;
Length Available Code
2.75 m 2.75 m/pc, 25 pcs/bundle 0801-10275000
3 m 3 m/pc, 25 pcs/bundle 0801-10300000
Material: Hot-dip coated steelApplication: Profiled section which can be set on plane surfaces to control the depth of cement or lime plaster applied. Technical data: Height of profile: 6 mm; 10 mm;
Depth gauge bead Available Code
bead 6 mm 3 m/pc, 50 pcs/bundle 0802-06300000 2.75 m/pc, 50 pcs/bundle 0802-06275000bead 10 mm 3 m/pc, 50 pcs/bundle 0802-10300000 2.75 m/pc, 50 pcs/bundle 0802-10275000
5MASTERPLAST GROUP INTERNATIONAL
PLASTER PROFILES
PVC depth gauge bead 8mm
Arch form profile
Angle bead for external rendering
Window connecting and covering profile
Material: PVCApplication: Profiled section which can be set on plane surfaces to control the depth of gypsum plaster applied. Technical data: Height of profile: 8 mm; Width of profile: 38 mm
Available Code
PVC depth gauge bead 8mm 2.5 m/pc, 20 pcs/bundle 0802-08300000
Material: Hot-dip coated steelApplication Intended to be used to improve the protection of the corners and also provide features to the internal cement or lime plastering of the construction. The enhanced edge and wings of the profile increase the stiffness. The edge of the profile should be covered entirely by plaster (at least 3 mm). Technical data: Width of profile: 48 × 48 mm;
Available Code
Angle bead for external rendering 3 m/pc, 15 pcs/bundle 0805-00300000
Material: Galvanized steel wireApplication: Improve the protection of the corners and also provide features to the internal cement or lime plastering of curved edges (e.g. arches).Technical data: Width of profile: 60 × 60 mm;
Available Code
Arch form profile 2.95 m/pc, 40 pcs/bundle 0803-00295000
Material: hard PVC profile with flexible, self-adhesive stripApplication: Self adhesive PVC profile with fixing strip for protection foils to form exact connections to door and window frames. Minimum fixing temperature: +5°CTechnical data: Necessary plaster thickness: min 10 mmTotal width of profile: 32 mm
Available Code
Window connecting and covering profile 2.5 m × 20 pcs = 50 m/bundle 0808-00250000
6MASTERPLAST GROUP INTERNATIONAL
PLASTER PROFILES
1007 – Corner bead for internal plastering
1028 – Corner bead with rigid PVC covering strip
Material: Hot-dip coated steelApplication: Intended to be used to improve the protection of the corners and also provide features to the internal cement or lime plastering of the construction. The enhanced edge and wings of the profile increase the stiffness. Technical data: Width of profile: 34 × 34 mm;
Available Code
1007 – Corner bead for internal plastering 3 m × 25 pcs/bundle 0801-20300000
Material: hot-dip coated steel with rigid PVC stripApplication: Intended to be used to improve the protection of the corners and also provide features to the external cement or lime plastering of the construction. The enhanced edge and wings of the profile increase the stiffness, the PVC covering strip protects against abrasion and corrosion.Technical data: Width of profile: 50 × 50 mm;
Available Code
1028 – Corner bead with rigid PVC covering strip 3 m × 15 pcs/bundle 0804-20300000
1041 – Corner bead with cut wings and PVC edging
Material: hot-dip coated steel with rigid PVC stripApplication: To realize circular arches and exact edgings at circular stairs. PVC covering strip protects against abrasion and corrosion.Technical data: Width of profile: 40 × 40 mm;
Available Code
1041 – Corner bead with cut wings and PVC edging 15 pcs × 2.5m 0803-20295000
7MASTERPLAST GROUP INTERNATIONAL
PLASTER PROFILES
1212, 1210 – Stop bead for internal plastering 10, 14 mm
Socle profiles for different plaster thicknesses in exterior application
3204 – Expension joint profile
Material: hot-dip coated steelApplication: Profiles to provide exact edging and connection for different cement and lime plaster thicknesses in interior application. Technical data: Height of profile: 31 mm;Width of profile: 10 and 14 mm
Type Available Code
10 mm 25 pcs × 3m 0807-30300000
14 mm 25 pcs × 3 m 0807-31300000
Material: hot-dip coated steel with rigid PVC cover stripApplication: Profiles for exact render edging and connection with other materials PVC cover strip for protection against abrasion and corrosion.Technical data: profile width: 1225 – 12 × 51 mmprofile width: 1229 – 20 × 48 mmprofile width: 1263 – 30 × 50 mmprofile width: 1264 – 40 × 50 mm
Available Code
1225 – socle profile for plaster thickness, 14 mm 3 m/pc, 15 pcs/bundle 0807-143000001229 – socle profile for plaster thickness, 20 mm 3 m/pc, 15 pcs/bundle 0807-203000001263 – socle profile for plaster thickness, 30 mm 3 m/pc, 15 pcs/bundle 0808-303000001264 – socle profile for plaster thickness, 40 mm 3 m/pc, 15 pcs/bundle 0808-40300000
Material: Galvanised steel with elastic centre partsApplication: for expansion joints in render surfaces. Technical data: profile width: 135 mm;Elastic centre part: 38 mmMovement absorption: Tension/Pressure for joint 25 mm +5 mm/–2 mm
Available Code
Expension joint profile 3 m/pcs, 15 pcs/bundle 0806-32040000
8MASTERPLAST GROUP INTERNATIONAL
PLASTER PROFILES
3712 – Window connecting and covering profile
9122 – Clip on profile
Material: hard PVC profile with flexible, self-adhesive stripApplication: Self adhesive PVC profile with fixing strip for protection foils to form exact connections to door and window framesTechnical data: necessary plaster thickness: min 9 mm
Available Code
Window connecting and covering profile 1.5 m × 60 pcs=90 m/bundle 0809-20250000
Material: AluminiumApplication: Additional profile to clip on to socle profile.Technical data: Width of profile: 15 × 20 mm
Available Code
9122 – Clip on profile in bundle, 20 pcs × 2.5 m 0111-19122000
9122
9MASTERPLAST GROUP INTERNATIONAL
ACCESSORIES FOR PLASTERING AND CONCRETING
PROFILFIX Profile fixing mortar
Metal reinforcement mesh
PREMIUM Fibergrass mesh
Ready-to-apply cementing mortar with synthetic resin additive Application: Fastening of plaster profiles used for lime and cement plasters (for concrete clay-brick and sand-lime brick surfaces) Coverage: 1 bag is enough for fixing ~60-100 m profiles (depending on the sur-face and the profile).Adhesive strength: 0.3 N/mm2 (galvanized steel – concrete) Release time: 0.3 N/mm2 (after 20 minutes)Applicable: within 20 minutes after mixingApplication temperature: above + 5°C
Available Code
PROFILFIX profile cementing mortar 25 kg/bag 0814-00025000
Material: Hot-dip coated, spot-welded steel meshApplication: Proper for the reinforcement of traditional plasters, while also increasing their strength and reducing the extent of shrinkage cracks. Especially recommended for strengthening the plaster layer of wood wool insulating boards.Technical data: Wire thickness: 0.8 mmHole width: 25 × 25 mm;Material demand: 1.15 m2/m2
Available Code
Metal reinforcement mesh 1 m × 50 m=50 m2 0503-60050000
Material: Blue alkali-resistant fiberglass mesh Application: Proper for the reinforcement of traditional plasters and also for gypsum plasters, while increasing their strength and reducing the extent of shrinkage cracks.Technical data: Coverage: 1.15 m2/m2
Mesh size: 10 mm × 10 mm
Available Code
MASTERNET PREMIUM mesh (R-85) 1 m × 50 m=50 m2 0810-085K0000
10MASTERPLAST GROUP INTERNATIONAL
ACCESSORIES FOR PLASTERING AND CONCRETING
PREMIUM R-52
MASTERPOL lime substitute additive
MASTERFROST set accelerating admixture for concrete and mortar
Material: alkali-resistant fiberglass mesh Application: Intended to be used as a reinforcement in the finishing layer of internal cement plaster, because it increases the strength of the plaster and reduces the risk of cracking on the surface. It also can be used in gypsum plaster.Technical data: Coverage: 1.1 m2/m2
Available Code
Interior fiberglass mesh 1 m × 50 m=50 m2 0811-052W0000
Material: Resin-based solution Application: When added to mortar, it reduces the quantity of the required mixing water, and makes the mixture easy to shape without the application of lime. Coverage: 2.8–5.6 dl/100 kg cementApplication temperature: above + 5°C
Available Code
MASTERPOL In 1 litre plastic can 0815-01000000MASTERPOL In 5 litre plastic can 0815-05000000
Material: Neutral, chloride- and ammonium-free additiveApplication: When added to concrete, it accelerates the setting and hardening process, increas-es heat formation during hydration, and reduces frost hazard of the concrete.Material demand: In correlation to the mass of cement 1-2% (depending on the type and tem-perature of, and the type of additive in the cementApplication temperature: Air temperature max. –10°C, temperature of fresh concrete min. +5°C. For detailed rules of application see the product description.
Cikkszám
MASTERFROST In 5 litre plastic can (7.2 kg) 0816-00005000MASTERFROST In 50 litre plastic can (72 kg) 0816-00050000
11MASTERPLAST GROUP INTERNATIONAL
ACCESSORIES FOR PLASTERING AND CONCRETING
Material: Polypropylene fibre additiveApplication: By adding to water, it reduces the volume of shrinkage cracks; improve the abrasive strength against dynamic effects and shock resistance, the compressive- and bending strength of concretes and mortars. Technical data: Fibre diameter: 30 μmLength: 12, 18 mmAdd: for concrete (with max. granules of 7 mm), estrich:1.4 –2 kg/m3;
Available Code
MASTERFIBER 30 μm, 12 mm 0.9 kg (in self-releasing paper bags) 0813-18312000
MASTERFIBER 30 μm, 18 mm 0.9 kg (in self-releasing paper bags) 0813-18320000
MASTERFIBER
12 MASTERPLAST GROUP INTERNATIONAL
OTHER ACCESSORIES
PE foil black, recycled0.05-0.09-0.15 and 0.2 mm thick
PE foil, transparent0.05 and 0.09 mm thick
Material: PE foil made of recycled PEApplication:• 0.05 mm: applicable as protective covering in case of painting and renovation, as well as
a vapour-control and sliding-separating layer under laminates. • 0.09 mm: applicable for the protective covering of building materials or as separating layer • 0.15 mm: applicable for the protective covering of building materials or as separating layer • 0.2 mm: applicable as separating layer under concrete slabs or as technological layer
over thermal insulationTechnical data:Vapour-diffusion resistance number(μ): in delivered condition ca. 80,000, which is expect-
ed to continuously decline during the yearsTemperature resistance: +70°CApplication temperature: –20°C – +40°C
Available Code
Recycled PE foil 0.05 mm In rolls, 2 × 25 m = 50 m2/roll 0901-05050000
Recycled PE foil 0.09 mm In rolls, 4 × 25 m = 100 m2/roll 0901-09100000
Recycled PE foil 0.15 mm In rolls, 4 × 25 m = 100 m2/roll 0901-15100000
Recycled PE foil 0.2 mm In rolls, 4 × 25 m = 100 m2/roll 0901-20100000
Material: made of primer PEApplication:• 0.05 mm: as a vapour-control and sliding-separating layer under laminates• 0.09 mm: as a vapour-control layer in not load-bearing partitions and for protec-
tion against dust from fibres of mineral wool thermal insulations.Technical data:Vapour-diffusion resistance number(μ): in delivered condition ca. 100,000, which is
expected to continuously decline during the years (at a lower rate than in the case of recycled PE foil)
Temperature resistance: +70°CApplication temperature: –20°C – +40°C
Available Code
Transparent PE foil 0.05 mm In rolls, 2 × 50 m = 100 m2/roll 0902-05100000
Transparent PE foil 0.09 mm In rolls, 4 × 25 m = 100 m2/roll 0902-09100000
13MASTERPLAST GROUP INTERNATIONAL
OTHER ACCESSORIES
Wide PE foil with UV resistant additive0.12 mm thick
Wide, black PE foil with UV resistant additive 0.12 mm thick
Material: made of primer PE and UV additiveApplication: for the protection of building materials, temporarily for agricultural purposes Technical data:Vapour-diffusion resistance number (μ): in delivered condition ca. 100,000, which is
expected to continuously decline during the years (at a lower rate than in the case of building foil)
Temperature resistance: +70°CApplication temperature: –20°C – +40°C
Width Available Code
4.2 m wide In rolls, 4.2 × 60 m=252 m2/roll 0903-042UV000
6.5 m wide In rolls, 6.5 × 60 m=390 m2/roll 0903-065UV000
8.5 m wide In rolls, 8.5 × 60 m=510 m2/roll 0903-085UV000
12 m wide In rolls, 12 × 60 m=720 m2/roll 0903-120UV000
Material: made of primer PE and UV additiveApplication: for the protection of building materials, for agricultural purposesTechnical data:Vapour-diffusion resistance number (μ): in delivered condition ca. 100,000, which is expected
to continuously decline during the years (at a lower rate than in the case of building foil)
Temperature resistance: +70°CApplication temperature: –20°C – +40°C
Available Code
Black PE foil 8.5 m 8.5 × 60 m=510 m2/roll 0903-085F0000Black PE foil 12 m 12 × 60 m=720 m2/roll 0903-120F0000
14MASTERPLAST GROUP INTERNATIONAL
OTHER ACCESSORIES
Agricultural foil0.15 mm thick
PE bag
Material: made of primer PE and UV additiveApplication: for agricultural purposes
With Available Code
4.2m In rolls, 4.2 × 80 m= 336m2 0903-0042U0006.5m In rolls, 6.5 × 60 m= 390m2 0903-0065U0008.5m In rolls, 8.5 × 60 m= 510m2 0903-0085U00012m In rolls, 12 × 60 m= 720m2 0903-0120U000
Material: made of recycled PE Application: for storing powder and waste of building material or as a lime bag
Available Code
PE bag 550 × 900 mm In bundles, 25 pc/bundle 0904-09000000PE bag 550 × 1150 mm In bundles, 25 pc/bundle 0904-11500000
Elastic foil
Material: made of PE Application: for packaging
Available Code
Stretchfoil In rolls, 50 cm wide, 2.5 kg/roll 0905-00000000
15MASTERPLAST GROUP INTERNATIONAL
OTHER ACCESSORIES
Plastic bucket12 and 20 litre
Plastic mortar trough65 and 90 litre
Material: flexible, made of recycled plastic.
Available Code
Bucket 12 litre In pieces 0906-01200000Bucket 20 litre In pieces 0906-02000000
Material: flexible, made of recycled plastic.
Available Code
Mortar trough 65 litre In pieces 0907-06500000Mortar trough 90 litre In pieces 0907-09000000
For further information and downloads, please visit to our website
www.masterplastgroup.com
MASTERPLAST Group Zrt.8143 Sárszentmihály, Árpád u. 1/a, HungaryPhone: +36-22-801-300, Fax.: +36-22-801-382 E-mail: [email protected]
MASTERPLAST Kft.8143 Sárszentmihály, Árpád u. 1/a., HungaryPhone: +36-22-801-300Fax: +36-22-801-382E-mail: [email protected]
MASTERPLAST România s.r.l.410605 Oradea, Şos. Borşului, nr. 45, RomaniaPhone: +40-259-465-456, Fax: +40-259-435-134E-mail: [email protected]
Î.C.S. MASTERPLAST CONSTRUCT S.R.L.2019, şos. Munceşti, nr.799/3, Chişinău, Republica MoldovaPhone / Fax: +373-22-524-148Phone: +373-69-314-042E-mail: [email protected]
MASTERPLAST YU d.o.o.24000 Subotica, Bodrogvari Ferenc 172, SerbiaPhone: +381- 24-625-825 Fax: +381-24-625-804E-mail: [email protected]
MASTERPLAST d.o.o.31304 Duboševica, Trg Hrvatske Mladeži 2, CroatiaPhone: +385-31-736-512; Fax: +38-5-31-736-513E-mail: [email protected]
MASTER PLAST s.r.o925 21 Sládkovičovo, Veľkoúľanská cesta 1339, SlovakiaPhone: +421-31-784-2181Fax: +421-31-784-2180E-mail: [email protected]
MASTER PLAST PLUS s.r.o.19600 Praha 9-Treboradice, Za tratí 197, Czech RepublicPhone: +42-0-286-850-565, Fax: +42-0-286-850-386E-mail: [email protected]
MASTERPLAST SP. z o.o.Ul. Kolejowa 23, 62-090 Rokietnica, PolandPhone: +48-61-896-35-58/59; +48-61-816-19-97;Fax. +48-61-814-11-79E-mail: [email protected]
MASTERPLAST DeutschlandProduktions- und Vertriebs GmbH39114 Magdeburg, Breite Str. 6f, Germany04519 Rackwitz, Kömmlitzer Str. 13, GermanyPhone: +49-0-34294-84662Fax: +49-0-34294-84663E-mail: [email protected]
MASTERPLAST Ukraina T.O.B.88000 Uzhgorod, Pavlovich u.5., UkrainePhone / Fax: +380-312-656093; +380-312-656073E-mail: [email protected]
MASTERPLAST Bulgaria EOOD1532 Sofia, MSK Kazichene, BulgariaPhone / Fax: +359-2-978-9791; +359-2-978-9764E-mail: [email protected]
Doo MASTERPLAST6250, Kičevo, 11 Septemvri 43, MacedoniaPhone: +389-45-223-766;Fax: +389-45-224-804E-mail: [email protected]
MASTERPLAST KO SHPK10000 Pristina, Rr. Drini i bardh , KosovoPhone: +377-44-250-877; +381-63-555-074E-mail: [email protected]
d.o.o. MASTERPLAST MONT85000 Bar, Jovana Tomaševića G-9, MontenegroPhone: +382-85-353-544; +382-69-657-131;Fax: +382-85-353-544E-mail: [email protected]
MASTERPLAST ÖSTERREICHProduktions- & Vertriebs GmbH3021 Pressbaum, Hauptstraße 119-5/4, AustriaPhone/ Fax: +43-0-2233-52244Mobile: +43-(0)676 - 710 80 82E-mail: [email protected]
MASTERPLAST ALB Sh.p.kTirane Llagja Ali Demi Kruga Shemsije Haka, AlbaniaE-mail: [email protected]
MASTERPLAST IGMIN D.O.O.78000 Banja Luka, Tunjice bb., Bosna i HercegovinaPhone: +387-51-386-486,
+387-51-386-437Fax: +387-51-388-966E-mail: [email protected]
MASTERPLAST China200433 Shanghai, Rm 1305, No. 2158 Siping Road, Fuqing Guoding Building, Yangpu District, ChinaPhone: +86 21 5506 2799Phone/Fax: +86 21 55063899E-mail: [email protected]