plasscom en priprema - hidroex.hr · 2010. 4. 14. · augusta Šenoe 74, 10290 zaprešić tel. 01...
TRANSCRIPT
Telecomunication Push-Fit
fittings for cable laying
www.hidroex.hr
connecting solutions
Distributor and representative
Advantages:·Stronger pipe joining
·Most Economical
·Superior Service
- Plasson Plasscom quality fittings have longpenetration and connecting zones which ensure high quality connections.
- Economic benefits are resault of overall integrated systemquality and innovation.
- Plasson provides through regional distributors unmatched servicebased on over 40years in the field.
HidroexAugusta Šenoe 74, 10290 Zaprešić
tel. 01 5535 677 fax. 01 5535 678 [email protected]
PLASSON’s part of the main worldreference in telecomunication industries.
Plasscom Fittings
Attached
- reference list -
As authorised distributor and representative for Croatia, BiH and Serbia of Plasson aworldwide leader in fittings for polyethylene pipes for over 40 years, now offers a completeline/solutions of Telecom fittings and tools.
Plasson PlassCom fittings are designed specially for PE cable ducts offering innovativefeatures dedicated to the specific needs of cable duct installations. The transparent bodyassures that the PE pipe has reached the pipe stop and the cable has passed through. Orangenuts help distinguish easily between a cable duct installation and other installations and thepush-fit fittings add ease when inserting the pipe - there is no need to disassemble the nutsfrom the body
Swiss Telecom, Switzerland
British Telecom, UKDeutsche Telecom, Germany
Tele2, Austria
Russian’s Telecom, Russia
Technical details:
Transparent body enables to ensure that:
Colour/orange nut
Push-fit Fitting System
Application
- Body and nut made of polypropylene- high grade copolymer, acetal terminal rings, O-ringsmade of NBR
- Pressure 16 bar for 2 hours, then 10 bar-
-- gh-
-
-
- for cable laying and pulling for zeroing
Pull out on PN pipes According to DIN T
The PE pipe reached the pipe stopThe cable has passed throu
10 : 8076 3.
The fitting is made from high quality virgin raw material
Enables to distinguish easily between a cable duct installation and others.
when inserting the pipe there is no need to disassemble the nuts from the body.
Providers for fixed networks
Technical specification:- These fittings have been specially designed for joining polyethylene pipes used with aworking pressure up to 10 bar. These fittings are designed according to ISO standrardsand are available in sizes 20 to 63mm
The fittings are:
- perfectly watertight- extremly simple to use- ease and fast to reuse- designed with captive O-ring
- frost proof- suitable for outdoor use in direct sunlight- highly impact resistant
www.hidroex.hrPlasscom Fittings
dimensiond x d
E H L
12 x 12 - - -
16 x 16 39 105 50
18 x 18 42 90 44
20 x 20 42 90 44
25 x 25 50 98 48
32 x 32 61 114 56
35 x 35 - - -
40 x 40 73 127 62
50 x 50 89 146 74
63 x 63 106 167 82
dimensiond
E L A
25 50 48 92
32 61 54 100
40 73 67 113
50 89 71 126
63 106 81 146
dimensiond
E L H
25 50 43 52
32 61 54 67
40 73 67 80
50 89 71 93
63 105 80 112
dimensiond
E A
25 50 61
32 61 62
40 73 65
50 89 68
63 106 77
size
24/25 x Cable 13
32 x Cable 13
50 x Cable 13
sizeG
L2 A
3/4" 17 65
1" 19 68
1 1/4" 22 72
1 1/2" 22 73
connecting solutions
End Plug+Air VentDuct coupling
End plug
This fitting is used as above when thereis a need to inf late the pipe with airpressure but when the air ventil needsto stay permanently on the end of the lineThis fitting provides a convenient way ofend i ng t he p i pe w i t h an a i r ven t i lconnected to the p ipe by a P lassoncompression fitting
,
,
.
.
Threaded Plug
+ Air Vent
Plug
+ Air Vent
AdaptorPlug
+ Air Vent
Adaptor Cable Gland Seal
Some times there is a request from the telecompipe installer or the telecom company to inflate the
PE pipe with air pressure This fitting can be
threaded into any standard female thread and air
pressure can be inflated using standard tire
inflating equipment The assumption is that the
fitting connected to the pipe is not a Plasson fitting
and thus we supply the air ventil on a threaded
plug
.
.
.
This fitting is used as above when there is
a need to inflate the pip with air pressure
The f i t t ing can b assembled into any
Plasson compression end using the normal
nut The split ring of the fitting can be kept
between the plug adaptor and the nut
e main use is with a coupler assuming that
in the future the pipeline will be continued
When the time comes to continue the line
the Plug adaptor Air Ventil is disassembled
from the coupler and the continuation pipe is
connected
,
.
,
,
+
e
e
. (
).
Th
.
.
The Cable Gland Seal is used when there is a
need to seal the end of the pipe after the telecom
cable was put in the pipe and the cable continues
out of the pipe A seal is achieved between the
internal surface of the pipe the Cable Gland Seal
and the external surface of the cable It is a
one piece rubber part with a slot along all its
length In order to use it a Plasson coupler is
installed on the end of the pipe before the cable
is pushed through the pipe After the cable has
been pushed or pul led through the pipe
the nut is disassembled from the coupler body
the split ring is taken out the Cable Gland Seal
is put over the cable the cable is forced through
the slot of the Cable Gland Seal and then the
Cable Gland Seal is pushed into the coupler body
and the nut is tightened over it This seal was
designed as a custom made product for British
Telecom and fits on a cable with an external
iameter of mm If there is a need for something
similar but with different dimensions it can be
discussed
,
.
, ,
.
-
. ,
) ( ,
- ,
)
(
.
13 .
, ,
.
www.hidroex.hrPlasscom Fittings
connecting solutions
Cable Installation Guard
This device is assembled on the end of the pipe prior
to the cable blowing operation It enables the air to
f l ow th rough wh i l e p ro tec t i ng the end o f the p i pe
from penetration of coarse dirt The riser has through slots
machined long its length to enable the blown air to
come out during the cable blowing operation A cylindrical
metal net is bound to the internal side of the riser covering
the internal side of the slots and acting as a filter letting
the air out and preventing dirt from penetrating into the pipe
.
.
( ) a
4
,
.
,
,
.
size
20
25
32
40
50
63
Duct Grip Coupling
Female
size
dd L G B
25 25 1125 14 125
size
dd L G B
25 25 1125 14 125
Duct Grip Coupling
Male
Th i s i t em i s u s ed t o g r i p on t he i n t e r na l
su r face o f a PE p ipe when there i s a need
to pul l the pipe through a larger d iameter
protective pipe It is a one piece machined
s ta in l e ss s tee l pa r t The long th read has
h a r p t e e t h a n d a d i a m e t e r t o f i t b y
t h r ead i ng i n t o t he mm SDR PE p i pe
When threaded in to the PE p ipe i t cu ts a
thread in the pipe and thus creates the grip
between the Duct Grip Coupling and the pipe
A suitable handle is connected to the other end
of the Duct Grip Coupling onto the short thread
In simple words the Duct Grip Coupling Male
enables the connection of a pulling means rope
handle to the inside of the PE pipe so that it can
be pulled through a protective pipe This Item was
a lso des igned as a cus tom made product
for British Telecom
. -
.
,
, 25 9
,
.
.
,
)
( ,
.
.
s
www.hidroex.hrPlasscom Fittings
Distributor and representative
Augusta Šenoe 74
10290 ZaprešićCROATIA
tel. 00385 1 5535 677
fax. 00385 1 5535 678
Hidroex