plasma cutting machine - nissan...
TRANSCRIPT
Plasma Cutting Machine
High productivity brought out at cutting shops!Outstanding features of KT-790PMX, which is being well-reputed because of high-quality beveling and cost saving by fast plasma-cutting process, are inherited to KT-790PJX. And KT-790PJX has realized further higher workability to meet demands from cutting shops. KT-790PJX, that has been reduced its cost by using newly developed Beveling Unit and has been downsized, shall surely provide great productivity to International market widely.
KT-790PJX, that has pursued farther high speed process, high-quality, high efficiency
1. New bevel cutting unitNewly developed RA (Rotate/Angle) style bevel cutting unit, which is lighter/smaller/higher-rigid than conventional High Speed Link Style and TCL Style, is employed to improve not only movement speed, but maintenability as well.
2. Improved operability PCNC (FANUC FS31iB+Panel i) is adopted to enhance Drawing Function. Real-time Drawing Function that shows you the current cutting-position and total cutting time while running a program, Document Viewer Function that can
see Manuals on the screen, these two functions have been available on the machine.
3. Improved cutting qualityNewly developed Cut-condition Setting Function utilizing functions of PCNC enables you to set Cutting Conditions
(AC current/Flow rate/etc) through NC controller. You can select Cutting material, Material thickness, Type of corner rope through NC controller, and the cutting can be done with much more suitable conditions.
Caution!
790PJX-01’13.02 NPC 2000
http://nissantanaka.com
The specifications are subject to change for improvement without notice.
Manufactured by :
No.11,Chikumazawa, Miyoshi, Iruma-gun, Saitama, 354-8585 JapanTEL : + 81-49-258-4412 FAX : + 81-49-258-4858
Plasma Cutting Machine
KT-790PJX Main specifications
Rail span
Effective cutting width
Rail length
Effective cutting length
Rail / rack size
NC controller
Speedspecification
Plasma cuttingapparatus
4,000~6,500mm
Rail span-1,000mm
Up to 50,000mm(Without cable-bearer less friction device)Up to 100,000mm(With cable-bearer less friction device)
Rail length-3,000mm
37kg/m rail(CP6)/50kg/m rail(CP6, CP10 and CP16)
FANUC 31iB+Panel i
Cutting speed : 0~10,000mm/minRapid speed : 30,000mm/minManual rapid speed : 12,000mm/minCutting head lift up/down speed : 18,000mm/min
PEGASUS 500 orHPR-400XD (HYPERTHERM INC)
OV
ER
ALL
MA
CH
INE
LE
NG
TH 2
673
292
270
OV
ER
ALL
MA
CH
INE
HE
IGH
T 17
3215
030
0
EFFECTIVE CUTTING WIDTH 4000
RAIL SPAN 5000
OVERALL MACHINE WIDTH 5600
5980
500
380
50
3001801230
1690460
3261657690
983
KT-790PJX machine body external view
Standardfunctions
Optionalfunctions
● Bevel cutting unit(RA style)● Initial height controller● Cutting height controller (Arc height control style)● Coordinate rotation function● Scheduled operation function● Operator’ s deck● Area sensor
● Stainless steel cutting● R-chamfering function (Only for PEGASUS 500)● Bottom 40 degree beveling function (Only for PEGASUS 500)● Powder marking device● Ink-jet marking device● Positioning camera● Dust collector (Stand-alone type)
Saitama factory is certified as ISO 9001 factory Registration No : 99QR - 156Scope of product / Service : Design and Manufacturing of Gas Cutting Machine, Plasma Cutting Machine and Laser Cutting Machine
●The person who operates Plasma Cutting Machine shall be required to take an adequate training based on regulations/laws/etc of each country.●Be sure to read through "Instruction Manual" beforehand, to properly operate the machine.