plant closed surplus equipment of...

HYDRAULIC CYLINDER MANUFACTURER INCLUDING CENTERLESS GRINDERS,CNC TURNING CENTERS, CNC MACHINING CENTERS, ENGINE LATHES, ID AND OD

GRINDERS, TOOLROOM MACHINERY, AIR COMPRESSORS AND SUPPORT EQUIPMENT

HYDRAULIC CYLINDER MANUFACTURER INCLUDING CENTERLESS GRINDERS,CNC TURNING CENTERS, CNC MACHINING CENTERS, ENGINE LATHES, ID AND OD

GRINDERS, TOOLROOM MACHINERY, AIR COMPRESSORS AND SUPPORT EQUIPMENTSee Instructions on Page 3

To Become a Qualified Bidder on the Internet

SALE DATE: TUESDAY, AUGUST 29TH, STARTING AT 9:00 AMSALE DATE: TUESDAY, AUGUST 29TH, STARTING AT 9:00 AMINSPECTION: MONDAY, AUGUST 28TH, FROM 10:00 AM TO 4:00 PM

SURPLUS EQUIPMENT OF WEATHERFORDSURPLUS EQUIPMENT OF WEATHERFORD600 Airpark Rd. – Woodward, Oklahoma 73801

120 Miles Northwest of Oklahoma City

Plant Closed

Cincinnati Model 350-20 CNC Centerless Grinder 42" Mattison No. 24 Rotary Surface Grinder

Mazak Model M5NX-1500 Flat Bed CNC Lathe

Mori Seiki Model SL-35 CNC Turning Center

(2) 100 HP Ingersoll Rand Model SSR-EP100 RotaryScrew CE Air Compressors

NEW2010

CINCINNATIINDUSTRIALAUCTIONEERS

auctioneers | appraisers | since 1961

Sale Under The Management Of

Cincinnati Industrial Auctioneers2020 Dunlap St., Cincinnati, Ohio 45214Phone 513-241-9701 Fax 513-241-6760cia-auction.com | [email protected]

In Conjunction With

Prestige Equipment Auctions35 Pinelawn Road, Melville, NY 11747Phone 613-249-5566 Fax [email protected]

1749381i CIA Weatherford-4 7/28/17 7:24 AM

TUESDAY, AUGUST 29TH – 9:00 AMTUESDAY, AUGUST 29TH – 9:00 AM

(4) Mori Model SL25B5 CNC Turning Centers Mori Model MV-65/50 CNC VMC

Mazak Model Quickturn 20 HP CNC TurningCenter

26”/36” x 78” South Bend Model Nordic Gap BedEngine Lathe

Mazak Ultra 650 Two-Pallet CNC HorizontalMachining Center

(5) LNS Hydrobar Bar Feeds to 4.5”

Mazak Model Multiplex 425 Twin-Spindle CNCTurning Center

Large Quantity Tooling and Machine Accessories

CNC TURNING CENTERSMazak Model M5NX-1500 Flat BedCNC Lathe; s/n 112893, 24” x 72”Capacity, Mazatrol T-Plus, 8-Pos. Front and6-Pos. Rear Turrets, Chip Conveyor, 12”Chucks (1995) SEE PHOTO

Mazak Model Quickturn 20 HPCNC Turning Center; s/n 118890, 10”Chuck, Tailstock, Foot Pedal, Mazatrol T-Plus (1996) SEE PHOTO

Mori Seiki Model SL-35 CNCTurning Center; s/n 1222, MF-T6Controls, 12” Chuck, 24” Swing Over Bed,72” Centers, 12 Pos. Turret, Tailstock,Coolant (Approx. 1993) SEE PHOTO

Mori Seiki Model SL-35B CNCTurning Center; s/n 760, Mori T5FControl, 12” Chuck, 12 Pos. Turret,Tailstock (1990)

Mazak Model Multiplex 425 Twin-Spindle CNC Turning Center; s/n105136, Maztrol T32-2, 10” Chuck, ToolProbe, 12 Pos. Turret (1992) SEE PHOTO

Mazak Model 35NATC Multi-AxisCNC Turning / Milling Center; s/n93673, Mazatrol T32-3 Control, 12”Chuck, 16-Pos. ATC, CHIP CONVEYOR,42” Centers, 20” Swing (1990)

• (10) 2” Shank Live Toolholdersand (10) Straight TypeToolholders

(4) Mori Model SL25B5 CNCTurning Centers; s/n 3668, 5102, 4328,& 4393, MF-T4 Controls, Collet and 8”Chucks, 10 Pos. Turrets, Tailstock, CHIPCONVEYOR (1990) SEE PHOTO

(2) Takisawa Model TC-4 CNCTurning Centers; s/n THxW-1291 &THxW-0216, Fanuc OT Control, (1) with12” and (1) with Collet Chuck, Tailstock,12 Pos. Turrets, 52” Centers, CHIP CON-VEYOR

(2) Takisawa Model TS-25 CNCTurning Centers; s/n TKMS-0054 &TKMS-0049, Fanuc OT Control, 10”Chuck, Tailstock, Tool Probe

Takisawa Model TC4 TurningCenter; s/n 1288, 15” Chuck, OTControl, 52” Centers (1988)

BAR FEEDS4.48” Cap. LNS Hydrobar Model7.114-5.2 Hydraulic Bar Feed

(3) LNS Hydrobar Model 6.65HS-5.2 Hydraulic Bar Feeds

LNS Hydrobar Model 6.90HS-5.4Hydraulic Bar Feed

CNC HORIZONTALMACHINING CENTERMazak Ultra 650 Two-Pallet CNCHorizontal Machining Center; s/n116909, Mazatrol M-Plus, 25” x 25”Pallets, 40 Pos. ATC, 50 Taper, ChipConveyor, Coolant, Renishaw Probe (1995)

SEE PHOTO

CNC VERTICALMACHINING CENTERSMori Model MV-65/50 CNC VMC;s/n 811, Mori Control, 25” x 76” Table, 30Pos. ATC, No. 50 Taper, Coolant

SEE PHOTO

Mori Model MV-55/50 CNC VMC w/4th Axis; s/n 1846, MF-M4 control, 22” x50” Table, 40 Positon ATC, Coolants

Mazak Model VTC-16B CNC VMC;s/n 126263, Mazatrol M Plus Control, 16”x 58” Table, 20 Pos. ATC (1997)

TOOLING(250) Approx. No. 50 Holders

(10) Machine Vises to 8”

(5) 4th Axis Tables by Haas,Tsudakoma and Others

16” x 30” Devlieg Angle Plate Set

Other Tooling Including SuperSpacer Chucks to 12”, IndexableLathe, Boring Bars and Drills,Carbide Inserts, Perishable Tooling,Machine Accessories

CENTERLESSGRINDERSCincinnati Model 350-20 CNCCenterless Grinder; s/n 9166-350-91-0110, GCH Rebuilt Wheel Spindle; s/n07320, 20” Wide Wheel, FanucPowermate CNC Control, 10’ Bar FeedRack, 50 HP Motor, Coolant (1991)

SEE PHOTO

Cincinnati Model Centurmatic 325-12 Centerless Grinder, s/n350412H5W-8, 12” Wheel, 4’ Infeed andOutfeed Bar, Racks, Dressers, Coolant(1970) SEE PHOTO

ID AND ODGRINDERS12” x 36” Toyota Model GUP-32x100 OD Grinder; s/n LG483-1,Drop Down ID, 1” Wide Wheel, MotorizedWorkhead, Tooling (1979) SEE PHOTO

12” x 36” Cincinnati OD Grinder;s/n 2U305A, ID Spindle

(2) Bryant Model 1116J IDGrinders; s/n N-15373, 7.5 HPHydraulic, PB Control, Coolant

Bryant Model 1416J ID Grinder; s/nR-15583, 12” Chuck, 7.5 HP, PB Control,Coolant

Cabinet with ID Grinding Stone,Mandrels and Chuck Jaws

ROTARY SURFACEGRINDER42” Mattison No. 24 Rotary SurfaceGrinder; s/n 24770, 43” Chuck, Approx.1/2” Chuck Lift, 22” Diameter GrindingWheel, 75 HP Motor, Marposs Gauging,PB Control, Coolant with Mac Filter,Hydraulic System SEE PHOTO

HONE144” Stroke (Approx.) HorizontalHone; 10” Chuck, 3-1/4” Hole Thru,Rolling Carriage with Hydraulic Stroke, 15HP Hydraulic Unit, Coolant with Filtration

SEE PHOTO

SAWS13” x 18” Hyd-Mech S20AHorizontal Band Saw, 16” Stroke BarFeed, PB Control SEE PHOTO

12” Dake Model 3155 Mitre ColdSaw (2007)

12” Kalmazoo Model K14S5Abrasive Saw (2008)

26” Doall Vertical Band Saw, BladeWelder

PRESSES20 Ton Hannifin Model S201-41-SPHydraulic Straightening Press; s/nD69664, 60” Wide Bed, Bed Clamps andWork Holders SEE PHOTO

60 Ton American Type M-2-6 C-Frame Hydraulic Press; s/n 4928

ENGINE LATHES26”/36” x 78” South Bend ModelNordic Gap Bed Engine Lathe; s/nN315D-64ET-0480, Taper, 15” Chuck,Speeds to 1,400 RPM SEE PHOTO

LATE ADDITION OF (4) FORK LIFTS – SEE WEBSITE FOR DETAILS


SURPLUS EQUIPMENT OF WEATHERFORDSURPLUS EQUIPMENT OF WEATHERFORD

(20) Dumping Hoppers From 1/4 Yard to 1-1/2 YardCapacity

(45) 15’ H X 2’ Arm Jarke Cantilever Racks

Minuteman Litterboss Diesel Power Rider Sweeper(80) 22” x 52” Tubular Frame Pipe and Bar Carts

Cincinnati Model Centurmatic 325-12 CenterlessGrinder

144” Stroke (Approx.) Horizontal Hone 12” x 36” Toyota Model GUP-32x100 OD Grinder

2,000 Deg. LuciferModel DL7-R24 ElectricFurnace

13” x 18” Hyd-Mech S20A Horizontal Band Saw

(10) 1/2 Ton to 2 TonFree-Standing JibCranes

20 Ton Hannifin ModelS201-41-SP HydraulicStraightening Press

6,600 Lb. Kalmar ModelEFY/30/08/55S ElectricSide Loader

(2) 100 HP Ingersoll Rand Model SSR-EP100 RotaryScrew CE Air Compressors

WEBCAST BIDDER INSTRUCTIONS➢ All Internet bidders must register for this auction at www.bidspotter.com at least 48-Hours Prior to the

Sale Date, if you do not you will not be approved.

➢ All Internet bidders must Post a Deposit of Approx. 25% of Your Planned SpendingBudget or $5,000.00 Minimum with Cincinnati Industrial Auctioneers in Order to beapproved to Bid. Those who do Not Post the Deposit Will Not be Approved. Period.

16” x 150” Monarch Engine Lathe;s/n 39742, Taper, 12” Chuck, Steady Rest

Lathe Tooling and AccessoriesIncluding Dumore 57-02 ToolpostGrinder, Aloris Toolpost with (10) Holders,Chucks, Centers, Lathe Tools and Related

TOOLROOMMACHINERY3 HP Hurco Mill with 12” x 48” Table,Power Draw Bar

2 HP Bridgeport Series I Mill, 42”Power Table

(2) Sunnen Model MBB-1800Hones; s/n 80155

KO Lee Model B360 T&C Grinder

Adrian Oliver Model 600 DrillGrinder

OK No. 202 Universal T&CGrinder, Power Workhead

48” Whitney Bench Center

(2) Rockwell Hardness Testers

MISCELLANEOUSMACHINERYFeedall Model 1700HD Auto BarLoader; s/n 15959, 100” (Approx.)Capacity

32” x 120” Cardinal HD Weld BuildUp Lathe Fixture

2,000 Deg. Lucifer Model DL7-018Electric Furnace; s/n 7548, 18” x 18” x18” Capacity

2,000 Deg. Lucifer Model DL7-R24Electric Furnace; s/n 7549, 24” x 24” x24” Capacity SEE PHOTO

500 Deg. Grieve Model AA-500Electric Oven; s/n 330008, 24” x 24” x24”

30” x 60” Kelco and 32” x 60” BlastCabinets with Reclaim

Lincoln Square Wave Tig 255Welder with Leads and Cooler

LNS Bar Champfer Machine with10” Chuck

Six-Tank Manual Dip Wash Line w/32” x 42” x 60” Long Tanks

(20) 20” x 32” x 16” Deep StainlessBaskets

(12) DE and Tool Grinders

(3) Coolant Systems with Filters,Approx. 40” x 96” x 32” Deep Tanks

Cecor Type CP5-100/100 PortableCoolant Pump

FORKLIFTSSee Website for Late Edition ForkLifts

6,600 Lb. Kalmar ModelEFY/30/08/55S Electric Side Loader;s/n 9-121-69, 216” Lift, 11’ Wide Carriage(1987) SEE PHOTO

5,000 Lb. Raymond Model E55TNElectric Side Loader; s/n 902-4D-E5STN-2240S, 181” Lift, 11’ Carriage

Minuteman Litterboss Diesel PowerRider Sweeper; s/n n/a, 51.04 HoursShowing SEE PHOTO

Radius 300 Walk Behind ElectricSweeper

JIB CRANES(10) Free Standing 360 DegreeRotating Jib Cranes for 8’ to 12’Arm and 1/4 Ton to 1 Ton

AIR COMPRESSORS(2) 100 HP Ingersoll Rand ModelSSR-EP100 Rotary Screw CE AirCompressors; s/n CK9394U10337(17,923 and 5,981 Hours) andCK965PU11222 (17,923 and 5,981), 434CFM, 125 PSIG, 460 Volt (New 2010)

SEE PHOTO

Ingersoll Rand Model D850INA400Air Dryer; s/n 552101

5 HP Speedaire Vertical Tank AirCompressor

SHOP EQUIPMENT15’ High x 2’ Arm Jarke Steel TreeDouble Side Cantilever Racks, (30)Uprights, (8) Shelves, (2” Spacer Brackets

15’ High x 2’ Arm Jarke Steel TreeSingle Side Cantilever Racks, with(14) Uprights with (9) Shelves Approx.,92” Spacer Brackets

(20) Dumping Hoppers From 1/4Yard to 1-1/2 Yard Capacity

SEE PHOTO

(80) 22” x 52” Tubular Frame Pipeand Bar Carts SEE PHOTO

(10) 20” x 36” (Approx.) HydraulicScissor Carts

Shop Equipment Including PlasticSpill Skids, Barrel Holders, (80) SectionsClip Type Steel Shelving, Carts, Racks,Ladders, Hoppers, Cabinets, (3) 4-Shelf 3’x 3’ Slide Out HD Racks, Pallet Rack,Ladders, Chains, Slings, Carts, Fork Jiband Drum Dumper, Mop Buckets andRelated

NEW2010


FIRST CLASS MAIL!

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞

All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.

15% ONSITE BUYER’S PREMIUM18% ONLINE BUYER’S PREMIUM

TERMS OF SALE

Use GPS for best resultsDIRECTIONS

TUESDAY, AUGUST 29THTUESDAY, AUGUST 29TH

SURPLUS EQUIPMENTOF WEATHERFORD

Although information has been obtained fromsources deemed reliable, the auctioneer makes nowarranty or guarantee, expressed or implied, as tothe accuracy of the information herein contained. It is for this reason that buyers should avail them-selves of the opportunity to make inspection prior to the sale. This brochure is intended to provide general information of the equipment being offered and is subject to errors, omissions, additions or deletions.Please check with the Auctioneer’s Office for a final listing. Items offered may or may not necessarily besold as described and/or photographed in this brochure.

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

IMPORTANT NOTICE:

PRE-SORTFIRST CLASS

U.S. POSTAGEPAID

CINCINNATI, OHIOPERMIT NO. 3593

Plant Closed


600 Airpark Rd.Woodward, Oklahoma 73801

120 Miles Northwest of Oklahoma City

(6) Mori Sieki CNC Lathes(6) Mori Sieki CNC Lathes(6) Mori Sieki CNC Lathes (2) Air Compressors (2011)(2) Air Compressors (2011)(2) Air Compressors (2011)

(13) CNC Lathes(13) CNC Lathes(13) CNC Lathes (2) Centerless Grinders(2) Centerless Grinders(2) Centerless Grinders


Plant Closed


600 Airpark Rd. – Woodward, Oklahoma 73801120 Miles Northwest of Oklahoma City

SALE DATE:Tuesday, August 29th

STARTING: 9:00AMINSPECTION:

Monday, August 28th10:00 AM to 4:00 PM



Contact Information2020 Dunlap St.Cincinnati, Ohio 45214Phone 513-241-9701Fax 513-241-6760www.cia-auction.com

Cincinnati Industrial Auctioneers, Inc.Jeffrey L. Luggen Joseph M. Luggen

AUCTIONEERS



Sale Under The Management Of

Cincinnati Industrial Auctioneers2020 Dunlap St., Cincinnati, Ohio 45214Phone 513-241-9701 Fax 513-241-6760cia-auction.com | [email protected]

In Conjunction With

Prestige Equipment Auctions35 Pinelawn Road, Melville, NY 11747Phone 613-249-5566 Fax [email protected]


plant closed surplus equipment of...

Documents