placing a straumann analog in the itero modelstoragy-itero-production-us.s3.amazonaws.com/... ·...
TRANSCRIPT
![Page 1: Placing a Straumann Analog in the iTero Modelstoragy-itero-production-us.s3.amazonaws.com/... · The Straumann WN Repositionable Implant Analog “press-fit” into the iTero milled](https://reader034.vdocuments.us/reader034/viewer/2022043009/5f9e5201f897304cf84b9ddf/html5/thumbnails/1.jpg)
Placing a Straumann Analogin the iTero Model
![Page 2: Placing a Straumann Analog in the iTero Modelstoragy-itero-production-us.s3.amazonaws.com/... · The Straumann WN Repositionable Implant Analog “press-fit” into the iTero milled](https://reader034.vdocuments.us/reader034/viewer/2022043009/5f9e5201f897304cf84b9ddf/html5/thumbnails/2.jpg)
Image of the iTero™ milled model with the socket for a Straumann® WN Repositionable Implant Analog
![Page 3: Placing a Straumann Analog in the iTero Modelstoragy-itero-production-us.s3.amazonaws.com/... · The Straumann WN Repositionable Implant Analog “press-fit” into the iTero milled](https://reader034.vdocuments.us/reader034/viewer/2022043009/5f9e5201f897304cf84b9ddf/html5/thumbnails/3.jpg)
The Straumann WN Repositionable Implant Analog “press-fit” into the iTero milled model.Instruction: Lab just has to place the analog in the model and double checks that it sets properly.
![Page 4: Placing a Straumann Analog in the iTero Modelstoragy-itero-production-us.s3.amazonaws.com/... · The Straumann WN Repositionable Implant Analog “press-fit” into the iTero milled](https://reader034.vdocuments.us/reader034/viewer/2022043009/5f9e5201f897304cf84b9ddf/html5/thumbnails/4.jpg)
If the lab would like to check the position, they can use a fine tip marker, indicate where the Repositionable Implant Analog is at the base of the model
![Page 5: Placing a Straumann Analog in the iTero Modelstoragy-itero-production-us.s3.amazonaws.com/... · The Straumann WN Repositionable Implant Analog “press-fit” into the iTero milled](https://reader034.vdocuments.us/reader034/viewer/2022043009/5f9e5201f897304cf84b9ddf/html5/thumbnails/5.jpg)
Measure the distance between the bottom shoulder of the WN Repositionable Implant Analog and where the base of the model was
indicated.
![Page 6: Placing a Straumann Analog in the iTero Modelstoragy-itero-production-us.s3.amazonaws.com/... · The Straumann WN Repositionable Implant Analog “press-fit” into the iTero milled](https://reader034.vdocuments.us/reader034/viewer/2022043009/5f9e5201f897304cf84b9ddf/html5/thumbnails/6.jpg)
Remove the WN Repositionable Implant AnalogUsing your measurement, indicate where to drill on the model and drill a
<2.2mm hole
![Page 7: Placing a Straumann Analog in the iTero Modelstoragy-itero-production-us.s3.amazonaws.com/... · The Straumann WN Repositionable Implant Analog “press-fit” into the iTero milled](https://reader034.vdocuments.us/reader034/viewer/2022043009/5f9e5201f897304cf84b9ddf/html5/thumbnails/7.jpg)
The drill should perforate the socket where the Repositionable Implant will seat.
![Page 8: Placing a Straumann Analog in the iTero Modelstoragy-itero-production-us.s3.amazonaws.com/... · The Straumann WN Repositionable Implant Analog “press-fit” into the iTero milled](https://reader034.vdocuments.us/reader034/viewer/2022043009/5f9e5201f897304cf84b9ddf/html5/thumbnails/8.jpg)
Confirm the seating of the Repositionable Implant Analog in the iTero milled model socket. Lab can glue it in place in order to get more stability.
![Page 9: Placing a Straumann Analog in the iTero Modelstoragy-itero-production-us.s3.amazonaws.com/... · The Straumann WN Repositionable Implant Analog “press-fit” into the iTero milled](https://reader034.vdocuments.us/reader034/viewer/2022043009/5f9e5201f897304cf84b9ddf/html5/thumbnails/9.jpg)
If the lab has additional questions, please recommend them to contact Straumann.