PLACEMENT TRAINING KNITTING QUESTIONS

1. Tightness factor is the ratio of the area covered by the yarn in one loop to the area occupied by that loop. Ans: true

2. Which year circular flat knitting machine was mostly established? Ans:1749

3. What type of knitting needle is performing in high speed action? Ans: compound

4. Bracing is one type of weft knitting principal. Ans :True

5. In tuck stitch fabric, the width of the fabric is ____________ Ans: extended

6. Lacoste fabric what type of combination? ( knit & tuck or knit & miss)

7. To draw the graphical representation of tuck stitch?

8. To draw the symbolic representation of knit stitch? Face &back

9. Ottoman rib is what type of knitted fabric? Ans: interlock

10. Three thread fleece are__________ type of fleece fabric?

11. The speed ratio of tricot & Rachel warp knitting machine is 1:2 or 2:1 or 3:2

12.In warp knitting machine, the machine speed is calculated by________ /min Ans: cycle

13.Calculate the GSM of an Interlock fabric. Length – 12”, width-5” and weight-12gms

14.Write the suitable count range for 24E &20E single jersey machine ans:30’s 34’s

15. The angle of pattern wheel. 20 -30`, 38 – 45`, 32 – 35`, 50 – 60`.

16. The pattern drum mechanism is related to dobby mechanism in shedding on a plain power loom. True or false.

17.In warp knitting machine how to calculate the gauge Rachel knitting machine

18. In accordion design fabric _______ stitches are not used.

19.Maximum of _______of repeat width of stripes is possible to knit with the ordinary machines. Ans: 3.5cms

20. The machine Gauge to be selected according to ______. Ans: yarn count

21.In knitting, the diameter of the machine, diameter of the grey fabric, diameter of the processed fabric and diameter of the finished fabric. These diameters will be the same. Ans : false