pjct outer
TRANSCRIPT
-
8/2/2019 Pjct Outer
1/24
AUTOMATIC TOLL BOOTH USING INFRARED
PROJECT REPORT
Submitted by
SREENATH.MV
Register No: 1032M0015
Under the guidance of
Mr.V.BALA PRAKASH
Submitted in partial fulfillment of the requirements for the award of the degree of
MASTER OF SCIENCE IN APPLIED ELECTRONICS
OF BHARATHIAR UNIVERSITY
DEPARTMENT OF ELECTRONICS
HINDUSTHAN COLLEGE OF ARTS AND SCIENCE
(Affiliated ti Bharathiar University)
COIMBATORE -641028
APRIL 2012
-
8/2/2019 Pjct Outer
2/24
Certificate
-
8/2/2019 Pjct Outer
3/24
HINDUSTHAN COLLEGE OF ARTS AND SCIENCE
COIMBATORE - 641028
Department of Applied Electronics
PROJECT WORK
APRIL 2012
This is to certify that the project entitled
AUTOMATIC TOLL BOOTH USING INFRARED
is the bonafide record of project work done by
SREENATH.MV
Register No: 1032M0015
of M.Sc.(Applied Electronics) during the year 2010-2012.
----------------------------- ---------------------------
Head of the Department Project Guide
Submitted for the Project Viva-Voce examination held on
---------------------------- ----------------------------
Internal Examiner External Examiner
-
8/2/2019 Pjct Outer
4/24
-
8/2/2019 Pjct Outer
5/24
DECLARATION
I here by declare that the project work entitledWHEATHER MONITORING
SYSTEM being submitted to the BHARATHIAR UNIVERSITY in partial
fulfillment of the requirements for the award of the degree of MASTER OF
SCIENCE IN APPLIED ELECTRONICS, is the original work carried out by
me. It has not formed the part of any other thesis submitted for award of any
degree or diploma, either in this or any other University.
Place:
Date:
Signature of the Candidate
SREENATH.MV
1032M0015
-
8/2/2019 Pjct Outer
6/24
Dedication
-
8/2/2019 Pjct Outer
7/24
I DEDICATE THIS WORK TO THE BELOVED GOD, MY
PARENTS AND TEACHERS WHO ENLIGHTENED THE
LIGHT OF KNOWLEDGE IN MY HEART
-
8/2/2019 Pjct Outer
8/24
Acknowledgement
-
8/2/2019 Pjct Outer
9/24
ACKNOWLEDGEMENT
My heartfelt thanks goes to Mr.P.GOWRISANKAR,M.Sc,M.Tech,PGD.e-
COM., Head of the department of Applied Electronics , HINDUSTHAN
COLLEGE OF ARTS AND SCIENCE, Coimbatore for his guidance and
suggestions at all stages of my project.
I take this opportunity to place on record my sincere thank to all the faculty of my
department for their valuable advice and support.
I also thank my parents, friends, and my family members who have offered their
unequivocal assistance and advice towards the successful completion of the
project.
I thank the almighty for showering his blessings in completing this project.
-
8/2/2019 Pjct Outer
10/24
Synopsis
-
8/2/2019 Pjct Outer
11/24
SYNOPSIS
The main objective of this project is to monitor the wheather and its
parameters. This project is carried over through embedded technology .
In this project we monitoring parameters like temperature,
humidity. PIC Microcontroller convert this analog input to digital using inbuilt
ADC converter and display the values on LCD screen. The control unit already
have the set point values of these parameters.Intially these value transmitted to the
sensing unit by RF module. sensing unit which receives this set point value and
compare the set point value with the sensed value. If sensed value greater than the
corresponding set point value then automatically the compensating actions carried
for the industrial safety.
-
8/2/2019 Pjct Outer
12/24
Contents
-
8/2/2019 Pjct Outer
13/24
-
8/2/2019 Pjct Outer
14/24
3.3 DESCRIPTION 39
4. SOFTWARE DEVELOPMENT 41
5. IMPLEMENTATIONS 43
6. FUTURE ENHANCEMENT 44
7. CONCLUSION 45
8. BIBLIOGRAPY 46
APPENDIX
DATASHEET
-
8/2/2019 Pjct Outer
15/24
Introduction
-
8/2/2019 Pjct Outer
16/24
System analysis
-
8/2/2019 Pjct Outer
17/24
Circuit Description
-
8/2/2019 Pjct Outer
18/24
Software Development
-
8/2/2019 Pjct Outer
19/24
Implementation
-
8/2/2019 Pjct Outer
20/24
Future Enhancement
-
8/2/2019 Pjct Outer
21/24
Conclusion
-
8/2/2019 Pjct Outer
22/24
Bibliograpy
-
8/2/2019 Pjct Outer
23/24
Appendix
-
8/2/2019 Pjct Outer
24/24