pivoting door system sliding door system dorma · pdf filemanet compact pivoting door system...
TRANSCRIPT
DORMA MANETCOMPACT
Pivoting door systemSliding door system
MANETCOMPACT
MANET COMPACT Pivoting door systemSliding door system
Wherever doors of high qual-
ity, unique design and a
maximum of functionality are
planned, the system
MANET COMPACT for sliding
and pivoting doors provides
an optimal solution.
The combination of elegant
stainless steel with extensive
glass panels gives the best
precondition for bringing out
design features.
Flush-fitting single point
fixings and the visually open
designed technique of the
door fittings, this is what
makes this system so unique.
The pull handles also show
this consistent MANET
design.
Besides the optical effect a
remarkable feature of
MANET COMPACT are the
standardised sets which allow
an easy and quick planning
of the common types of
assemblies with 10 or 12 mm
toughened glass.
Optimal accessories allow
various design possibilities
within the individual sets.
The system components are
fitted with numerous
adjustment possibilities to
guarantee an unproblematic
mounting of sliding, double
or single action doors.
If necessary wall connection
profiles have to be considered
on site for the fixing of
sidelights or overpanels.
2 8/00
Types of pivoting doors
Types of sliding doors
Overall view
Type 1Pages 6-7
Type 9Pages 8-9
Type 12Pages 8-9
Type 13Pages 10-11
Type 15Pages 10-11
Type 18Pages 8-9
Type 21Pages 8-9/ 10-11
Type 23Pages 10-11
Type IPages 12/13/14
Type IIPages 12/13/15
Type IIIPages 12/13/16
Type 2Pages 6-7
Type 3Pages 6-7
Type 4Pages 6-7
Type 5Pages 6-7
Type 6Pages 6-7
Type 7Pages 6-7
Type 8Pages 6-7
8/00 3
Fitting components for pivoting doors
Overpanel/sidelightconnector
Overpanel/sidelightconnectorwith stopinside
Stop for ceilingmounting
Stop foroverpanelmounting
Handle bar
Intermediatetube
Pivot pole with single point fixingsand pivot bearingfor Dorma BTS/floor pivot
Pivot pole with single point fixingsand pivot bearing
Pivot polewith single point fixingsand pivot bearingfor interme-di-ate tube
Pivot pole with single point fixings and pivot bearing for intermediate tube,Dorma BTS/ floor pivot
Back-to-back handle bars
Overpanel/sidelightconnector withpivot bearing location
Pivot bearing locationfor overpanel
Eccentric bushing for top pivot pin or lock bolt
Floor pivot
Top/bottomLock
Eccentric bushing for top pivot pin or lock bolt
4 8/00
Pivoting door system
The MANET COMPACT sets
for pivoting doors contain all
components to realise various
types of assemblies.
In addition to the short pivot
poles the sets comprise floor
pivots and top pivot patch
fittings with pivot pins or
pivot sockets.
Optionally a continous visual
effekt of the pivot pole can
be achieved by use of the
short pivot poles in connec-
tion with an intermediate
tube which is cut on site
based on the door height.
All door types can be fitted
with floor springs,
e.g. DORMA BTS 75 V.
For completion, various
options are available.
Maximum measures of the
pivoting door:
Weight 80 kg
Height 2500 mm
Width 1200 mm
Assembly advice:
Tighten the single point
fixings with the tool for
manuel locking and tighten
up to 15 Nm with a torque
wrench.
MANET COMPACT Pivoting door system
8/00 5
Measurements pivoting door with overpanel with an inter-mediate tube
Spacing between glass drillings and handle bar
Glass drilling for OSCor stop
Glass drilling for back-to-back handle bars
Glass drilling overpanel/sidelight connector
Measurements for stop for ceiling mounting
Measurements and glass preparation: Lock
Glass preparation for all drillings except for handle bars and locks
Mounting of ceiling pivot
50
50±0.3 67±0,3
±..3
±0.3
±0
.3
±0
.3
±0
.3
±0
.3±0
.3
±0
.3
OKF
3
5
40 3
12
0
Door weight80 kg
Door height 2500 mm
Door width 1200 mm
50
3
5
67
12
0
40
Counter-sunk holesfrom the front side
Counter-sunk holes from thefront side
7
Glass preparationfor pivoting doors
27
52
8015
01
13
15
01
13
22
mm
10(12)mm
10(12)mm
3 mm -0.2
Ø 3
2 m
m +
0.2
Ø 2
6 m
m
90
°
An NC-controlled glasspreparation with size standards of max. ±0,3 mm is to be preferred.
28
5 m
m2
78
mm
50
3
67
67
12
0
40
Counter-sunk holesfrom thefront side
Door opening
Overpanel
Sidelight
50
3
3065
30
30
12
0±0
.3
40
18
.5
Countersunkholes from the front side
Door opening
inside
outside
BTS
Overpanel
Sidelight
28
40
Dooropening
Ceiling
Sid
elig
ht
shifting duringassembly
ø 25
28.5
77
ø 25Ceiling
2173 65 65 mm
55 mm
65
mm
10
(12
)
mm
10 12
63
28
.5
28
.5
7 7
113
min. 65
52
0 m
m
10
40
mm
1
56
0 m
m
±0
.3
±0.3
Countersunkholes from thefront side
sidelight to door
8
wall to door
6 8/00
for 10 mm toughened glass
COMPACT-Set 7 COMPACT-Set 1
for 12 mm toughened glassconsisting of:
1
21.500 21.500 Pivot pole pair top/bottom, short type
including: 4 Single point fixings for pivot poles
1 Pivot bearing for DORMA BTS/floor pivot
1 Pivot bearing (top)
1 Eccentric bushing for top pivot pin
Pivoting door system COMPACT-Set 1 for 10 mm toughened glassCOMPACT-Set 7 for 12 mm toughened glass
MANET COMPACT Pivoting door system
Set Art.-no. Set Art.-no.DescriptionAmount
Eccentric bushingfor top pivot pin Ceiling
Pivot pole withsingle pointfixings and pivot bearing
Pivoting door
Optional handle bars
Pivot pole withsingle pointfixings and pivot bearingfor DORMA BTSor floor pivot
8/00 7
for 10 mm toughened glass
COMPACT-Set 7 COMPACT-Set 1
for 12 mm toughened glassOptions:
1
1111111111111
21.501
21.27221.275 21.27821.27121.27421.27721.33414.40014.405 05.19401.10621.13621.138
Set like 21.500, but with intermediate tube in fix length (please indicate)Pair of handle bars, length 720 mmPair of handle bars, length 1240 mmPair of handle bars, length 1760 mmHandle bar, length 720 mmHandle bar, length 1240 mmHandle bar, length 1760 mmStop for ceiling/wall mountingLock top/bottomLock top/bottom, prepared for profile cylinder, with rose on one sideEccentric bushing for lock (14.400, 14.405)Floor pivot with round spindleTool for single point fixings, 1/2“ nuts Sickle spanner
Art.-no. Art.-no.DescriptionAmount
Examples and options
Type 1 COMPACT-Set1 or 7
Type 2COMPACT-Set 1 or 7
Type 3COMPACT-Set 1 or 7
Type 4COMPACT-Set 1 or 7
Type 52 COMPACT-Sets 1 or 7
Type 62 COMPACT-Sets 1 or 7
Type 72 COMPACT-Sets 1 or 7
Type 8 2 COMPACT-Sets 1 or 7
Pivotingdoor
Pivotingdoor
Pivotingdoor
Pivotingdoor
Pivotingdoor
Pivotingdoor
Side-light
Pivotingdoor
Ceiling
Pivotingdoor
Side-light
Pivotingdoor
Side-light
Pivotingdoor
Pivotingdoor
Pivotingdoor
Side-light
Side-light
Side-light
Side-light
Side-light
Ceiling Ceiling Ceiling Ceiling
Ceiling Ceiling Ceiling
21.501
21.270 21.273 21.27621.27121.27421.27721.33414.40014.40505.19401.10621.13621.138
for 10 mm toughened glass
COMPACT-Set 8 COMPACT-Set 2
for 12 mm toughened glassconsisting of:
1 21.502 21.502 Pivot pole pair top/bottom, short type
including: 4 Single point fixings for pivot poles
1 Pivot bearing for DORMA BTS/floor pivot
1 Pivot bearing (top)
1 Pivot bearing location for overpanel
Pivoting door system COMPACT-Set 2 for 10 mm toughened glassCOMPACT-Set 8 for 12 mm toughened glass
MANET COMPACT Pivoting door system
8 8/00
Set Art.-no. Set Art.-no.DescriptionAmount
Pivot bearinglocation foroverpanel
Pivot pole withsingle pointfixings and pivot bearing
Optional handle bars
Pivoting door
Overpanel
Pivot pole withsingle pointfixings and pivot bearingfor DORMA BTSor floor pivot
8/00 9
COMPACT-Set 8 COMPACT-Set 2
Examples and options
Type 12COMPACT-Set 2 or 8
+ 1 Overpanel/sidelight connector
Pivotingdoor
Side-light
Overpanel
Type 9COMPACT-Set 2 or 8
Pivotingdoor
Overpanel
Type 182 COMPACT-Sets 2 or 8
Type 211 COMPACT-Set 2 or 8
+1 COMPACT-Set 3 or 9
Pivotingdoor
Pivotingdoor
Pivotingdoor
Pivotingdoor
Side-light
Overpanel Overpanel
for 10 mm toughened glass for 12 mm toughened glassOptions:
1
111111111111111111
21.503
21.27021.27321.27621.27121.27421.27721.33421.33521.33614.40014.40505.19421.32021.32221.32401.10621.13621.138
21.503
21.27221.27521.27821.27121.27421.27721.33421.33521.33614.40014.40505.19421.32121.32321.32501.10621.13621.138
Set like 21.502, but with intermediate tube in fix length (please indicate)Pair of handle bars, length: 720 mm
Pair of handle bars, length: 1240 mmPair of handle bars, length: 1760 mmHandle bar, length 720 mmHandle bar, length 1240 mmHandle bar, length 1760 mmStop for ceiling/wall mountingStop for overpanel mounting insideStop for overpanel mounting outsideLock top/bottomLock top/bottom, prepared for profile cylinder, with rose on one sideEccentric bushing for lock (14.400, 14.405)Overpanel/sidelight connectorOverpanel/sidelight connector with stop insideOverpanel/sidelight connector with stop outsideFloor pivot with round spindleTool for single point fixings, 1/2“nutsSickle spanner
Art.-no. Art.-no.DescriptionAmount
for 10 mm toughened glass
COMPACT-Set 9 COMPACT-Set 3
for 12 mm toughened glassconsisting of:
1 21.504 21.506 Pivot pole pair top/bottom, short type
including: 4 Single point fixings for pivot pole
1 Pivot bearing for DORMA BTS/floor pivot
1 Pivot bearing (top)
1 Overpanel/sidelight connector
with pivot bearing location
Pivoting door system COMPACT-Set 3 for 10 mm toughened glassCOMPACT-Set 9 for 12 mm toughened glass
MANET COMPACT Pivoting door system
10 8/00
Set Art.-no. Set Art.-no.DescriptionAmount
Overpanel/sidelight connectorwith pivot bearing location
Pivot pole withsingle pointfixings and pivot bearing
Optional handle bars
Pivoting door Sidelight
Overpanel
Pivot pole with single point fixings and pivot bearingfor DORMA BTSor floor pivot
8/00 11
for 10 mm toughened glass
COMPACT-Set 9 COMPACT-Set 3
for 12 mm toughened glassOptions:
1
111111111111111111
21.505
21.27021.27321.27621.27121.27421.27721.33421.33521.33614.40014.40505.19421.32021.32221.32401.10621.13621.138
21.507
21.27221.27521.27821.27121.27421.27721.33421.33521.33614.40014.40505.19421.32121.32321.32501.10621.13621.138
Set like 21.504, but with intermediate tube in fix length (please indicate)Pair of handle bars, length 720 mmPair of handle bars, length 1240 mmPair of handle bars, length 1760 mmHandle bar, length 720 mmHandle bar, length 1240 mmHandle bar, length 1760 mmStop for ceiling/wall mountingStop for overpanel mounting insideStop for overpanel mounting outsideLock top/bottomLock top/bottom, prepared for profile cylinder, with rose on one sideEccentric bushing for lock (14.400, 14.405)Overpanel/sidelight connectorOverpanel/sidelight connector with stop insideOverpanel/sidelight connector with stop outsideFloor pivot with round spindleTool for single point fixings, 1/2“nutsSickle spanner
Art.-no. Art.-no.DescriptionAmount
Examples and options
Type 13COMPACT-Set 3 or 9
Type 15COMPACT-Set 3 or 91 Overpanel/sidelight connector+
Type 211 COMPACT-Set 2 or 81 COMPACT-Set 3 or 9+
Type 232 COMPACT-Sets 3 or 9
Pivotingdoor
Side-light
Overpanel
Pivotingdoor
Side-light
Side-light
Overpanel
Pivotingdoor
Pivotingdoor
Side-light
Side-light
Overpanel
Pivotingdoor
Pivotingdoor
Side-light
Overpanel
Fitting componentsfor sliding doors
Sliding door system
MANET COMPACT Sliding door system
12 8/00
Sliding doors realized with
the MANET COMPACT sets
can be installed in glass
partition walls as well as in
wall openings.
Accurate positioning of the
endstops on the track ensures
a safe restriction of the
sliding movement.
The track tube is available
in different standard length
depending on type and mea-
surements of the assembly.
As protection against noise
and draught the sliding
doors are also available with
perimeter brush profiles.
The installation of centre or
corner locks is an additional
optional feature.
Maximum measurements
of the sliding door:
Weight 100 kg
Height 2500 mm
Width see charts
Pages 14-16
Assembly advice:
Tighten the single point
fixings with tool for manual
locking and tighten up to
15 Nm with a torque wrench.
Sliding door lock
Sliding track tube
Sliding door rollerComplete fittingwithout stabilizer
Lock
Aluminium brush profile, anodized similar to satin steel, fix length2530 mm
Floor guide, 50 mm long,for mounting onto floor
Floor guide, 50 mm long,plastic profile,aluminium-coated, anodized similar to satin steel formounting onto floor
Sliding sleevefor wall fixing,flattened,left/right
Clamp fixing fortrack, countersunksingle point fixing
Endpiece
Attention!Max. distance betweenthe clamps = 1/2 thewidth of the door
Clamp fixing for track,wall fixing
Aluminiumguide rail with brushseals, embed-ded, fix length3000 mm
Eccentric bushingfor corner lock
Doorstopupperleft
Doorstopupperright
Handel bar
Back-to-back handle bars
Door knob, one side fixing
Pair of door knobs
ø 3
0m
in.3
5
10(1
2)m
m
10(1
2) m
m
Sliding door Sidelight
min
. 3
5 m
m
min
.3
5 m
m
min.35
min.35
ø 30 ø 30
55 55
35
60
As requiredby installation
50
50
8/00 13
Measurements and glass preparation for sliding doors
Perimeter brushprofile, if required on three edges
with 10 mm glass(11.5 with 12 mm glass)
10(12) mm
Slid
ing
door
ø 4
5
10.5
13.5
Side
light
min
. 7
0
Wall WallSliding door
Attention! The placement of stops, clamp and wallfixings depend on the width of the door 18.5
60
30
42
Measurements and assembly for wall fixings
Measurements between glass drill-ings for handle bar
Glass drilling for back-to-backhandle barsand pair of door knobs
Glass drillings for sliding door roller
Measurements and glass preparation, lock
Measurements and glass preparation, lock for sliding doors
Glass preparation for all drillings, except for back-to-back handle bars,pair of door knobsand locks
±0
.3±0
.3±0
.3
22
mm
10(12)mm
10(12)mm
3 mm -0.2
inside outside
Ø 3
2 m
m +
0.2
Ø 2
6 m
m
90
°
An NC-controlled glass preparation with size standards of max. ±0.3 mm is to be preferred.
2173 65 65 mm
55 mm
13.5
65
mm
10
(12
)
mm
10 12
63
28
.5
28
.5
7 7
113
min. ca. 65
52
0 m
m
10
40
mm
1
56
0 m
m
for 10 mm toughened glassCOMPACT-Set 10 COMPACT-Set 4
for 12 mm toughened glassconsisting of:
1 52111
see below21.15321.402 21.42021.421 07.126
see below21.15321.40321.42021.421 07.126
Sliding track tube with endpiecesClamp fixings for track, wall fixingSliding door rollersDoor stop leftDoor stop rightFloor guide, plastic, for mounting onto floor
MANET COMPACT Sliding door system
14 8/00
Art.-no. Art.-no.DescriptionAmount
Options:
11 111111111111111
21.52721.27021.273 21.276 21.271 21.274 21.27721.42321.42221.43314.40014.40505.19421.43221.41521.13621.138
21.52721.27221.27521.27821.27121.27421.27721.42421.42221.43314.40014.40505.19421.43221.41521.13621.138
Sliding track tube with endpieces, fix length 3000 mmPair of handle bars, length 720 mmPair of handle bars, length 1240 mmPair of handle bars, length 1760 mmHandle bar, length 720 mmHandle bar, length 1240 mmHandle bar, length 1760 mmPair of door knobsDoor knob, one side fixingFloor guide, length 50 mm, aluminium coated, anodizedLock top/bottomLock top/bottom, prepared for profile cylinder, with rose on one sideEccentric bushing for lock (14.400, 14.405)Guide rail, length 3000 mmBrush profile, similar satin steel, fix length 2530 mmTool for single point fixings, 1/2“nutsSickle spanner
Measurements:
WallSliding doorOptionalhandle bars
Stop
Sliding door roller Sliding track tube with wall fixings and endpieces
Stop
Floor guideoutside
insideType I
910-1010 (800 - 900) mm1010-1110 (900-1000) mm1110-1210 (1000-1100) mm1210-1310 (1100-1200) mm
960-1060 mm1060-1160 mm1160-1260 mm1260-1360 mm
Door width Tube length Tube Art.-no. Tube Art.-no.2038 mm2238 mm2438 mm2638 mm
21.52021.52221.52421.526
21.52021.52221.52421.526
Daylight opening (Entry width)
Sliding door system COMPACT-Set 4 for 10 mm toughened glassCOMPACT-Set 10 for 12 mm toughened glass
Sliding door system COMPACT-Set 5 for 10 mm toughened glassCOMPACT-Set 11 for 12 mm toughened glass
Overpanel
SidelightSliding doorOptionalhandle bar
Attention !Notice placementof stops, clampand wall fixings
Stop
Sliding door rollers Sliding track tube with single point fixings and endpiece
Wall fixingStop
Floor guideType II
for 10 mm toughened glassCOMPACT-Set 11 COMPACT-Set 5
for 12 mm toughened glassconsisting of:
1 621111
see below21.15121.40221.42021.421 07.126 21.440
see below21.151 21.40321.42021.421 07.126 21.440
Sliding track tube with endpieceClamp fixings for track, glass fixingSliding door rollersDoor stop leftDoor stop rightFloor guide, plastic, for mounting onto floorSliding sleeve for wall fixing, flattened
Art.-no. Art.-no.DescriptionAmount
Options:
11 111111111111111
21.52721.27021.273 21.276 21.271 21.274 21.27721.42321.42221.43314.40014.40505.19421.43221.41521.13621.138
21.52721.27221.275 21.278 21.271 21.274 21.27721.42421.42221.43314.40014.40505.19421.43221.41521.13621.138
Measurements:
920-1020 (800 - 900) mm1020-1120 (900-1000) mm1120-1220 (1000-1100) mm1220-1320 (1100-1200) mm
960-1060 mm1060-1160 mm1160-1260 mm1260-1360 mm
Door width Tube length Tube Art.-no. Tube Art.-no.2038 mm2138 mm2338 mm2538 mm
21.52021.52121.52321.525
21.52021.52121.52321.525
Daylight opening (Entry width)
8/00 15
outside
inside
Sliding track tube with endpiece, fix length 3000 mmPair of handle bars, length 720 mmPair of handle bars, length 1240 mmPair of handle bars, length 1760 mmHandle bar, length 720 mmHandle bar, length 1240 mmHandle bar, length 1760 mmPair of door knobsDoor knob, one side fixingFloor guide, length 50 mm, aluminium coated, anodizedLock top/bottomLock top/bottom, prepared for profile cylinder, with rose on one sideEccentric bushing for lock (14.400, 14.405)Guide rail, length 3000 mmBrush profile, similar satin steel, fix length 2530 mmTool for single point fixings, 1/2“nutsSickle spanner
MANET COMPACT Sliding door system
16 8/00
COMPACT-Set 6 for 10 mm toughened glassCOMPACT-Set 12 for 12 mm toughened glass
Sliding door system
Sidelight
Stopper
Stop Sliding door roller Sliding track tube with single point fixings and endpieces
Sliding door
Floor guideType III
Sliding door
Optionalhandle bar
Overpanel
for 10 mm toughened glassCOMPACT-Set 12 COMPACT-Set 6
for 12 mm toughened glassconsisting of:
1 72111
see below21.15121.402 21.42021.421 07.126
see below21.15121.403 21.42021.421 07.126
Sliding track tube with endpiecesClamp fixings for track, glass fixingSliding door rollersDoor stop leftDoor stop rightFloor guide, plastic, for mounting onto floor
Art.-no. Art.-no.DescriptionAmount
Options:
11 1111111111111111
21.52721.27021.273 21.27621.271 21.274 21.27721.42321.42221.43321.44514.40014.40505.19421.43221.41521.13621.138
21.52721.272 21.275 21.278 21.271 21.27421.27721.42421.42221.43321.44514.40014.40505.19421.43221.41521.13621.138
Sliding track tube with endpieces, fix length 3000 mmPair of handle bars, length 720 mmPair of handle bars, length 1240 mmPair of handle bars, length 1760 mmHandle bar, length 720 mmHandle bar, length 1240 mmHandle bar, length 1760 mmPair of door knobsDoor knob, one side fixingFloor guide, length 50 mm, aluminium coated, anodizedSliding door lockLock top/bottomLock top/bottom, prepared for profile cylinder, with rose on one sideEccentric bushing for lock (14.400, 14.405)Guide rail, length 3000 mmBrush profile, similar satin steel, fix length 2530 mmTool for single point fixings, 1/2“nutsSickle spanner
Measurements:
880- 980980-1080
1080-11801180-1280
(770- 870) mm(870- 970) mm(970-1070) mm
(1070-1130) mm
960-1060 mm1060-1160 mm1160-1260 mm1260-1360 mm
Door width Tube length Tube Art.-no. Tube Art.-no.2338 mm2438 mm2538 mm2638 mm
21.52321.52421.52521.526
21.52321.52421.52521.526
Daylight opening (Entry width)
outside
inside
8/00 17
Order details
1 Tool for fixing, 1/2“ nutsArt.-no. 21.136
2Sickle spanner Art.-no. 21.138
1
2
Installation tools
MANET COMPACT Sliding door system
Measurementsfor installation and glass preparation
18 02/01
COMPACT-Set 10for 12 mm glass
COMPACT-Set 4for 10 mm glass
COMPACT-Set 11for 12 mm glass
COMPACT-Set 5for 10 mm glass
OW = overpanel widthSW = sideligth widthDW = door width
Measurements:
910-1010 ( 800- 900) mm1010-1110 ( 900-1000) mm1110-1210 (1000-1100) mm1210-1310 (1100-1200) mm
960-1060 mm1060-1160 mm1160-1260 mm1260-1360 mm
Door width Tube length Tube Art.-no. Tube Art.-no.2038 mm2238 mm2438 mm2638 mm
21.52021.52221.52421.526
21.52021.52221.52421.526
Daylight opening (Entry width)
Set 4 for 10 mm glass Set 10 for 12 mm glass
Set 5 for 10 mm glass Set 11 for 12 mm glass Measurements:
920-1020 (800 - 900) mm1020-1120 (900-1000) mm1120-1220 (1000-1100) mm1220-1320 (1100-1200) mm
960-1060 mm1060-1160 mm1160-1260 mm1260-1360 mm
Door width Tube length Tube Art.-no. Tube Art.-no.2038 mm2138 mm2338 mm2538 mm
21.52021.52121.52321.525
21.52021.52121.52321.525
Daylight opening (Entry width)
max. DW/2
DW = daylight opening + 50
DW
DW = door width
50
50
143
70
40
143
Sliding door
Overpanel
Seen from inside Sidelight
3
180180
143 143
Y YXX
X = (OW-360) /2= max. DW/2
Y = (SW-100) /2= max. DW/2
70
Seen from inside Sliding door Wall
8/00 19
Measurementsfor installation and glass preparation
COMPACT-Set 12for 12 mm glass
COMPACT-Set 6for 10 mm glass
COMPACT-Set 12for 12 mm glass
COMPACT-Set 6for 10 mm glass
OW = overpanel widthSW = sidelight widthDW = door widthEW = entry width
OW = overpanel widthSW = sidelight widthDW = door width
Measurements:
880- 980980-1080
1180-1280
(770- 870) mm(870- 970) mm
(1070-1130) mm
960-1060 mm1060-1160 mm
1260-1360 mm
Door width Tube length Tube Art.-no. Tube Art.-no.2338 mm2438 mm2538 mm2638 mm
21.52321.524
21.526
21.52321.524
21.526
Daylight opening (Entry width)
Measurements:
1080-1180 (970-1070) mm 1160-1260 mmDoor width Tube length Tube Art.-no. Tube Art.-no.
2538 mm 21.525 21.525Daylight opening (Entry width)
Set 6 for 10 mm glass Set 12 for 12 mm glass
Set 6 for 10 mm glass Set 12 for 12 mm glass
Overpanel
X = (OW-360) /2= max. DW/2
DW
Y = (SW-360) /2= max. DW/2
180180
3
70
40 40
3
120 180
SidelightSeen from inside Sidelight Sliding door
YYX X
Important notice!Installation measurementsof clamp fixing X1 andstop X2 must be checked.X1 = SW-180X2 = EW-15
X1 ≤ X2 - 45 orX1 ≥ X2+45
Overpanel
X = (OW-360) /2= max. DW/2
TB
Y = (SW-360) /2= max. DW/2
180180
143 143
143 143
3
70
40 40
3
120 180
Sidelight
Seen from inside Sidelight Slidingdoor
YYX X
X1
X2
see belowsee below
WN 800.51.150.6.32. · GB · 5 · Dom/CtP · 11/01
Postal addressDORMA-Glas GmbHPostfach 326832076 Bad SalzuflenGermany
LocationMax-Planck-Straße 37–4332107 Bad SalzuflenGermany
FON ++49(0)5222/924-0FAX ++49(0)5222/21009
www.dorma-glas.com