piston vibrator - shape · l ub r ic a to. u se nh p vibrator operates at maximum ef i cn y. all...
TRANSCRIPT
6 Wadhurst Drive, Boronia, VIC, AUS 3155 ph: +61 3 9800 6777 fax: +61 3 9800 2211
INTRODUCTIONEPV
PISTON VIBRATORSFor the past 25 years Enmin have been regarded as one of the most experienced application engineering houses for Industrial Vibrators. The development of the new range of Piston Vibrators is backed by experience and the goal to provide an exceptional product that meets the highest industry expectations.
WHY USE ONE?Piston Vibrators are linear in operation and are used to provide a controlled, direct force to a specific region of a hopper, storage bin, chute or silo where material blockage or build-up has occured. They are a cost-effective solution to bulk material-flow problems commonly encountered in most industries. Piston Vibrators ensure that product does not adhere to the walls, therefore helpingto avoid production and maintenance problems.
Enmin Piston Vibrators have been designed to easily switch from air-cushion to impact operation. This is achieved by removing/replacing the easily accessable rebound plug in the base of the unit.
Removing the plug enables air-cushion operation whilst replacing it creates an impact piston vibrator.
This feature allows the unit to be tailored exactly to each application.
Enmin Piston Vibrators are designed and manufactured within Australia.
The slotted base design ensures that Enmin Piston Vibrators are interchangeable with the majority of existing piston vibrators throughout the market
IMPACT OPERATIONFunctions of the Impact variation include:
- Lower Noise than most competitors'- Greater Linear Force- Low Air Consumption- For more demanding applications
INDUSTRIES- Food- Chemical- Mining- Plastics - Concrete- Metal - Brick & Tile - Glass - Power Stations- Foundries
2.
AIR-CUSHION OPERATIONFunctions of the Air-Cushion variation include:
- Low noise - Gentle Vibration- Low Air-Consumption- Acceptable for use near Operators
6 Wadhurst Drive, Boronia, VIC, AUS 3155 ph: +61 3 9800 6777 fax: +61 3 9800 2211
EPV PISTON VIBRATOR RANGE 3.
5000
6200
7500
2
4
6
95
125
160
69
70
72
FREQUENCY(Hz)
PRESSURE(bar)
AIR USAGE(L/min)
NOISE(dBa)
FREQUENCY(Hz)
PRESSURE(bar)
AIR USAGE(L/min)
NOISE(dBa)
EPV 25EPV - 25 AC
EPV 381750
2600
2980
2
4
6
90
120
150
72
80
82
EPV - 38 AC
2490
3500
3800
2
4
6
100
125
180
82
90
95
EPV - 38 LI
309
1211/4 BSP
1/4 BSP
13
13
45
Note: Information presented may be updated without notification. Please consult Enmin if exact dimensions are required
105
105
136
1/4BSP
1/4BSP
16
76
76
56
56
6 Wadhurst Drive, Boronia, VIC, AUS 3155 ph: +61 3 9800 6777 fax: +61 3 9800 2211
EPVPISTON VIBRATOR RANGE 4.
EPV 751400
1580
2340
2
4
6
120
140
240
72
76
82
EPV - 75 AC
2000
2600
3100
2
4
6
140
260
320
70
96
98
EPV - 75 LI
EPV 502100
2600
3400
2
4
6
90
140
215
68
77
80
EPV - 50 AC
2700
4050
4200
2
4
6
100
150
210
85
93
93.5
EPV - 50 LI
Note: Information presented may be updated without notification. Please consult Enmin if exact dimensions are required
125
125 181
16
90
90
76
76 3/8BSP
3/8BSP
13
102175 128
175128
102 16
232
1/2BSP
3/8BSP
18
FREQUENCY(Hz)
PRESSURE(bar)
AIR USAGE(L/min)
NOISE(dBa)
FREQUENCY(Hz)
PRESSURE(bar)
AIR USAGE(L/min)
NOISE(dBa)
6 Wadhurst Drive, Boronia, VIC, AUS 3155 ph: +61 3 9800 6777 fax: +61 3 9800 2211
ACCESSORIESEPV
MOUNTING CHANNELThese are provided as standard 1m lengths and come ready to install in either mild or stainless steel. All mounting channel comes with notches to ensure that welds are positioned correctly.
Trouble free mounting is achieved due to multiple bolt hole positioning and nuts being welded to the inside of the channel.
5.
SOLENOIDSThe Solenoid Valve is a normally closed device that operates on a signal from the Electronic Timer.
Installed close to the Piston Vibrator it ensures that the air-supply to the vibrator is instantaneous and full.
Various voltages are available to marry with the Timer.
Note : Upon ordering please specify the voltage required.
TIMERSA timer can be used in conjunction with the piston vibrator to minimise operational time and conserve plant air. They are recommended for maximum efficiency and can be interlocked with adjacent equipment.
Simple to program and simple to install, digital timers are IP rated to suit the harshest environments.
Timers can be supplied as single installation (TS), or multi-timer installation. Multi timer installations set up a maximum of 4 units to be controlled at a single point.
Note : Upon ordering please specify the voltage required.
EPV - 25EPV - 38EPV - 50EPV - 75
E-FRL1
E-FRL1
E-FRL2
E-FRL2
25MC-MS
25MC-SS
38MC-MS
38MC-SS
50MC-MS
50MC-SS
75MC-MS
75MC-SS
E-TS
E-TS
E-TS
E-TS
E-SOL1
E-SOL1
E-SOL1
E-SOL1
10mm
10mm
12mm
12mm
E-BV-B
E-BV-B
E-BV-B
E-BV-B
12/40mm
12/40mm
12/40mm
16/50mm
EEM-1/4
EEM-1/4
EEM-3/8
EEM-1/2
AIR-SERVICE
KITS
MOUNTING
CHANNEL TIMERMODEL TYPE SOLENOID
HOSE
DIAMETER
BALL
VALVE
BOLT
DIAMETER
EXHAUST
MUFFLER
BOLT
TORQUE
43Nm
43Nm
43Nm
110Nm
NOTE: Variations on items are available upon request. Please consult the distributor or manufacturer for further information.
AIR-SERVICE KITSThese kits are comprised of an efficient air-service filter, regulator and lubricator. Use ensures that the piston vibrator operates at maximum efficiency.
All FRL kits are supplied with suitable press-in fittings and 1000 mm of air line.
BALL VALVESBall valves are available in both stainless steel and brass.
The ball valve allows safe maintenance and can be used to restrict air-flow into the vibrator.