pipes and tubes
TRANSCRIPT
Pipes and Tubes
European delivery programmeOctober 2009
Foreword pipes and tubes
Foreword
Dear reader,
We proudly present to you our brand-new catalogue. The layout has been refreshed and modernized to increase its
ease of use. Many changes were also made to its content. Indeed, our portfolio is constantly changing in response to
changes in both demand and supply. For example, the transition from DIN standards to Euro Standards is currently
still in full swing. The Euro Standard has already been adopted for many items, while other items are still in a
transition phase. The product tables and the technical information refl ect the most recent state of affairs.
We hope that you will fi nd the information you are looking for in this document. We would also like to refer you
to our website, www.vanleeuwen.com, for additional information. Our website was completely revamped at the
beginning of 2009. Continuous investment in modern communication tools is a top priority for us. The proper
exchange of information is at the root of an enjoyable business relationship. A printed catalogue naturally cannot
compete with the internet and other electronic resources. However, the demand for our catalogues to this very day is
still so high that we are pleased to respond to this need.
Please do not hesitate to contact us should you have any questions. Our contact information is listed on the back of
this publication.
I hope you enjoy perusing this catalogue!
M.A.L.W.J. van Engelen
General Director
Van Leeuwen Buizen, Zwijndrecht, the Netherlands
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 1
2 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Table of contentsDelivery programme from stock for pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Seamless steel pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Welded steel pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Customized services for pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Material treatments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Logistics services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Consultancy and customer-specific services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Technical information for pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
General factors for conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Overview most important Euronorms for pipe and tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Standards and steel qualities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Pipe schedules and wall thicknesses in inch/mm and weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Product descriptions for pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Seamless steel pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Welded steel pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Pipes and Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Appendix A for pipes and tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 3
Delivery programme from stock for pipes and tubes
Overview delivery programme from stock
1 Seamless steel pipes & tubes
EURONORM
EN 10210-1/2 Seamless steel tubes, steel grade S235 JRH
EN 10210-1/2 Seamless steel tubes, steel grade S355 J2H
EN 10297-1 Seamless steel tubes, steel grade E355 AR
EN 10294 Seamless hollow bar, steel grade E470 AR
EN 10255 Seamless gas tubes, steel grade S195T
EN 10216-1 Seamless steel pipes, steel grade P235 TR1
EN 10216-2 Seamless steel boiler tubes, steel grade P235 GH
API
API 5L Gr. B Seamless steel pipes, steel Grade B
API 5L Gr. B Seamless steel pipes, steel Grade B, galvanised, threaded and coupled
ASTM / ASME
A/SA 106-B Seamless steel pipes, ASTM A106/A530M/SA530 M Grade B
A/SA 333 Gr.6 Seamless steel pipes, ASTM A 333M/SA 333M Gr.6 LT 45
In a number of cases, a combination of the above mentioned standards is applicable.
Pipes and tubes according to any other standard or steel grade can be offered upon request.
4 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Delivery programme from stock for pipes and tubes
2 Welded steel pipes & tubes
DIN
DIN 1626 Welded steel tubes, steel grade St.37.0
DIN 2394 Welded steel precision tubes, steel grade St.34.2
DIN 2394 Welded LEBU® central heating pipes, electrolytic zinc plated, steel grade St.34.2
DIN 2440 Welded gaspipes, steel grade St.33
DIN 2441 Welded steam pipes, steel grade St.33
EURONORM
EN 10210-1/2 Welded steel tubes, steel grade S355 J2H
EN 10219-1/2 Welded steel tubes, steel grade S235 JRH
EN 10219-1/2 Welded steel tubes, steel grade S355 J2H
EN 10217-1 Welded steel pipes, steel grade P235 TR1
EN 10217-1 Welded steel pipes, steel grade P265 TR2
EN 10217-2 Welded steel pipes, steel grade P195 GH
EN 10255 Welded gaspipes, steel grade S195 T
EN 10305-3 Welded precision tubes, steel grade E195 + CR1
BS
BS 3059 / 87 part 1 Welded steel boiler tubes, steel grade ERW 320
API
API 5L Gr. B SAW longitudinally welded steel pipes, steel grade B
API 5L Gr. B ERW longitudinally welded steel pipes, steel grade B
API 5L Gr. X42 ERW longitudinally welded steel pipes, steel grade X42
ASTM
A 53 Gr. B ERW longitudinally welded steel pipes, steel grade B
The transition from DIN to EN standards is still in progress. All DIN standards still mentioned above, will be
replaced by EN standards soon. For more information, see the special chapter about Euronorms.
In a number of cases, a combination of the above mentioned standards is applicable.
Pipes and tubes according to any other standard or steel grade can be offered upon request.
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 5
Customized services for pipes and tubes
Customized Service
Van Leeuwen Buizen is more than just a supplier of materials. We offer a wide range of services to provide you with the most
comprehensive product offering possible. This way we anticipate our customers’ needs. Our services are designed to speed
up delivery, and make delivery easier and more complete, enabling you to focus on your own core activities. Our services are
subdivided into material treatments, logistics services and customer-specific services.
1 Material Treatments
a. Cutting
We can cut your circular pipes and tubes to fix lengths at our own facilities:
• Maximumoutsidediameter:813mm
• Minimumlength:20mm
• Maximumlength:12meters
For outside diameters > 813 mm, pipes can be cut to fix lengths by oxygen cutting:
• Maximumoutsidediameter:1.280mm
• Minimumlength:50mm
• Maximumlength:12meters
Hollowsectionscanalsobecuttomeasure.Themaximumoutsidedimensionofthehollowsectionsis400x400mmor500x300
mm (the abovementioned specifications otherwise apply).
b. Angular cutting
We can make angle cuts of square and rectangular hollow sections in accordance with your drawings. We can make simple, as
wellassquareandtrapezoidalmitercuts.Onlyasingleanglecutispossibleateachpipeend.Theangletoleranceis-0,25°/+0,25°.
c. Laser and Plasma Cutting
Laser and plasma cutting allow many variously shaped cut-outs to be made at the end as well as in the middle of the pipe. The
possibilitiesandbenefitsarecountless.Forexample,suchcutscanbemadewithhigherprecisionincomparisontotraditional
cutting methods and there is less loss of material, no burr-forming and the cutting speed is higher. We would be pleased to make
the necessary computations for you to determine if this treatment is beneficial for you as well.
d. Shot-blasting and Priming
Circular pipes and tubes and hollow sections can be shot-blasted and primed.
The following options are available:
• ExternalSA2.5shot-blastingtoSwedishStandardSIS055900–1967.
• Primingusingred-brownKPC7205*AquaWeldingPrimer;layerthicknessapprox25μ.
• PrimingusingaEuroponorSigmaepoxyshopprimer;layerthicknessapprox20μ.
• PrimingusingaSigmaweidMCsilicateshopprimer;layerthicknessapprox20μ.
* A fast drying water-borne resin-based primer.
6 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Customized services for pipes and tubes
We can also shot-blast and prime individual pipe components for you. Furthermore, there is a combined option consisting of
theinternalandexternalshot-blastingoffittingsortheall-aroundshot-blastingofflanges,followedbyaMagneticParticle
Examination(MPE)test.
The treatments most frequently applied to pipe components are:
• ExternalSA2.5shot-blasting
• InternalandexternalSA2.5shot-blastingoffittings
• ExternalSA2.5shot-blastingandprimingusingEuroluxalkydweldprimer;approx20μ
• ExternalSA2.5shot-blastingandprimingusingSigmaweldshopprimer;approx20μ
• ExternalSA2.5shot-blastingandprimingusingSigmaweldMCzincsilicateshopprimer;approx20μ
• ExternalSA2.5shot-blastingandprimingusingVLBtransparantpipecoating(Eurolux)
• All-aroundSA2.5shot-blastingofflanges
• ExternalSA2.5shot-blastingandprimingusingzincepoxy;approx20μ
e. Chemical Cleaning of Pipes and Pipe Components
Inadditiontoshot-blasting,pipesandpipecomponentscanalsobechemicallycleaned.Internalandexternalcleaningthentakes
place at the same time. Depending on the contamination of the pipe or pipe component supplied and the desired delivery state
oftheproduct,theoveralltreatmentcanbemoreextensive.
By completely removing the mill scale and other contamination, this cleaning method not only cleans the surface, but also makes
theproductvulnerabletorenewedcorrosion.Ifnoadditionaltreatmentiseffected,itisrecommendedthatexternalprotection
beprovidedbyapplyingathinlayerofoil.Internalcontaminationcanbepreventedbyusingplasticcapsasaprotectivemeasure.
The following options are available to you:
• Degreasing
• Pickling,rinsingandphosphating
• Pickling,rinsing,phosphatingandcapping
• Degreasing,pickling,rinsingandphosphating
• Degreasing,pickling,rinsing,phosphatingandcapping
• Pickling,rinsing,phosphatingandinternaland/orexternaloiling
• Pickling,rinsing,phosphating,internaland/orexternaloilingandcapping
• Degreasing,pickling,rinsing,phosphatingandinternaland/orexternaloiling
• Degreasing,pickling,rinsing,phosphating,internaland/orexternaloilingandcapping
Definition of concepts used above:
Degreasing: contaminants such as oil and grease are removed prior to pickling.
Pickling: removal of layers of oxidation, annealing and mill scale, and corrosion products.
Phosphating: treatment using a hot phosphoric acid solution to prevent rust (temporary protective layer).
Oiling: Internal and/or external oiling (up to a maximum of 12 meters) using Shell Ensis Fluid E.
f. Hot-dipped galvanizing and Electrolytic zinc plating
Hot-dipped galvanizing involves immersing the material in a bath of liquid zinc. Once it solidifies, the zinc layer acquires a matte
appearance. When pipes with relatively thin walls compared to their diameter are galvanized using this method, there is a risk of
warping. The advantage of hot dipping is that the inside and outside of the material are evenly galvanized. The thickness of the
zinc layer depends on the thickness of the material to be galvanized.
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 7
Customized services for pipes and tubes
Specifications:
• Hot-dippedgalvanizedtoNENEN1461orA-123
• Minimumdiameter:17mm
• Minimumlength:6meters
• Noguaranteethatpipeswillnotwarp
With electrolytic zinc plating the zinc layer is deposited electrolytically by immersing the product in a water-based solution
andpassinganelectriccurrentthroughtheproductandfluid.Thelayerofzincisthenpassivated,whichsignificantlyincreases
its resistance to corrosion. The passivation layer is a thin layer of zinc chromate on top of the zinc layer and can assume various
colors,suchasblue,yellow,greenandblack.Thisgivesthematerialasatinappearance.Incontrasttohotdippedgalvanizing,
thereisnoriskofrelativelythin-walledpipeswarping.Adisadvantageofelectrolyticgalvanizingisthatpipesareonlygalvanized
ontheoutside.Iftheinsidealsoneedstobegalvanized,anadditionalauxiliaryanodeisrequiredontheinside.
Specifications:
• Layerthickness:8-12mμ
• Standardbluepassivated;yellowisalsoavailable
• For5-7meterpipes
• Standardpackaging:perforatedfilm
g. External Polyethylene Coating
Pipesandpipecomponentscanbegivenanexternalpolyethylene(PE)coatingtoextendtheirservicelife.Acoatinglikethisis
usuallyappliedtopipesthatareburiedunderground.Thepolyethyleneisappliedbyhoseorwrappingextrusionfollowingthe
applicationofanepoxyprimerbase.
Specifications:
• PEcoatedtoDIN30670N/norEN6901/6902,standardlayerthicknesswithepoxy
baselayer(3-layercoating)usingthehoseextrusionprocess
• Color:standardisblack;yellowisalsoavailable
• Layerthicknessinaccordancewithstandard
• Ifrequired,theKIWAmarkcanbeapplied(fordeliverywithintheNetherlands)
Additional options:
• PEcoatingusingthesinteringmethod
• ExternalPEcoatingcombinedwithinternalcementlining
h. Annealing
We offer the following options:
• GBKannealingatapprox.720°C
• NBKannealingatapprox.930°C
Unless otherwise specified, the pipes will be lightly oiled using spray guns after annealing. Lack of oiling increases the risk of
corrosion significantly.
* NKB annealed circular pipes and tubes are straightened afterwards.
8 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Customized services for pipes and tubes
i. Mechanical Treatments
Van Leeuwen can provide a wide range of mechanical treatments.
The treatments most often requested are:
• MachiningofgasketfacesofRFflangestoaflatfacewithafinishofRa=3.2–12.5micrometers(=125–500microinches
AARH)toASME/ANSIB16.5aandB46.1–1985.
• MachiningofgasketfacesofflangestoafinishofRa=4.0–6.3micrometers(=160–250microinchesAARH)to
ANSI/ASMEB46.1–1985.
• MachiningofgasketfacesofflangestoasmoothfinishofRa=3.2–6.3micrometers(=125–250microinchesAARH)
accordingtoShellspecification76/001.Machiningwithatoolradiusof0.8mmandapitchof0.35–0.45mm.
• MechanicaltreatmentofpartiallymachinedANSIflanges,suchas:internaldrillingacrosstheentireheighttoASME/ANSI
B16.5–1988andB16.5a–1992toaspecifiedSchedule.Machiningoftheroot/groovefacetoASME/ANSIB16.5–1988Fig.8.
Gasketfacetobetreatedtothedesiredtype.
• InternaldrillingoftheboreofflangesacrosstheentireheighttoASME/ANSIB16.5–1988andmachiningtheroot/groove
facetoASME/ANSIB16.5–1988Fig.8.
• MachiningofDINweldingneckflangeswithextrastrongS-size:internaldrillingacrosstheentireheightuptoaspecified
wallthickness;machiningthegasketfacetoafinishofRa=3.2–6.3micrometers(=125–250microinchesAARH);
andmachiningtheroot/groovefacetoDIN2559part105-1973form22.
• MachiningofDINweldingneckflangeswithextrastrongS-size:internaldrillingacrosstheentireheightuptoaspecified
wallthickness;machiningofroot/groovefacetoDIN2559part105-1973form22.
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 9
Customized services for pipes and tubes
2 Logistics Services
a. Storage
One of our core competencies consists of maintaining a broad and in-depth inventory of steel pipes, pipe components and valves.
OurstrategicinventoriesarestoredatvarioussitesinEurope,theMiddleEast,AsiaandAustralia.
Managinginventoriesconsequentlyisaveryimportantactivityforus.Theoptimizationofinventorylevelsandatsameour
ability to guarantee a high level of service to our customers requires our day-to-day attention. We therefore invest a great deal
inourpeople,training,softwaresystemsandresourcestobeabletoachievethis.Forexample,afewyearsagoweintroducedan
advanced platform elevator for storing a major portion of our components. Furthermore, we introduced an innovative software
system for managing our inventories.
b. Distribution
Thespeedofourservicesisakeysuccessfactor.Everyday,largevolumesofsteelpipesandothermaterialsmaketheirwayfrom
strategicallylocatedlogisticscenterstocustomersallovertheworld.Intensificationoftheshuttleservicesbetweenourvarious
stocklocationshasgivenusahighdegreeofflexibilityandraisedourlevelofservice.Furthermore,wecontinuallyinvestinmodern
equipmentdesignedtoimproveourdistribution.Recently,forinstance,wepurchasedaLoadPlate,whichenablesclosedcontainers
tobeloadedmuchfaster.AnotherexampleofcustomdistributionisourHeavyWallExpress®servicewithintheBenelux.Cutor
uncutheavywallseamlesspipescanbeorderdupto17:00hours,andaredeliveredbefore12:00thenextday.
c. Export Packaging and Marking
Ourmaterialsareshippedallovertheworld.Wethereforeoffervarioustypesofexportpackaging,includingcrates,boxes
andfilmpackaging.Naturallywealsopackagetoacustomer’sspecification,withstrawedgingsunderthecabletiesandskids
between the bundles if required. Furthermore, we also apply all required markings, such as paint dots, lines or stencils, including
the desired brand name identification.
d. Document Control
To verify and confirm that our products are made and supplied according to specifications, design drawings, laws and
regulations and other contract-specific requirements, we provide full documentation and document management services. The
documentation may consist of packing lists, material certificates, purchase specifications, order confirmations, invoices, (online)
pricelists,(online)cataloguesandQAcertificates.Weprovidethematerialcertificateselectronicallyandcanputthemtogether
onCD-ROMonaperprojectbasis,forexample.
10 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Customized services for pipes and tubes
3 Consultancy and Customer-specific Services
a. Project Management
Weputtogetherprojectteamsforlarge-scaleprojectsthat,ifdesired,canalsoworkatthecustomer’ssite.Asidefromlooking
afterthepurchaseofthenecessarymaterials,thisenablesustoprovideexcellentsupportintheareaofexpediting,deliveryand
document control before, during and after the project.
b. Consultancy
Allofouremployeesarethoroughlyfamiliarwithourproducts.Thecontinuityofthisknowledgeisassuredthroughinternal
training programs facilitated by senior staff and training programs facilitated by branche organizations. We also actively contribute
to this area. Furthermore, we have our own metallurgist on staff. He can advise you concerning standards, different quality steel
levels and other material properties to enable you to select the right product for the right application.
c. Testing and Inspection
We can carry out various inspections and material tests for you, destructive and non-destructive. The most common type of
destructive testingconsistsofadditional3.2testingunderthesupervisionofLloyd’soranotherindependentinspectionbody.
The following additional tests are also available:
• Tensilestrengthtest
• Hotyieldtest
• Impacttestatdifferenttemperatures
• Bendingtest
• Flaringtest
• Ringtensiletest
• Ringbendingtest
• Ringflaringtest
• Hardnesstest
• Spectralanalysis
• PositiveMaterialIdentification(PMI)test
Non-destructive testing includes:
• Ultrasonictest
• MagneticParticleExamination(MPE)test
• PMItest
• Ferritetest
• EddyCurrenttest
Materialscanalsobeinspectedpriortobeingshipped.Thiscanbedonebyaninspectorfromourowninspectiondepartment,by
the customer or by an independent inspection body.
d. Customer-dedicated Inventories
We service all of our customers from our general inventories maintained at various sites around the world. But in some cases
we also manage specific inventories reserved for a single customer only, based on that customer’s projected purchasing
requirements.Thisassuresourcustomersofsufficientmaterialswithouthavingtomaintainextensiveinventoriesthemselves.
Thisserviceisparticularlyappropriateforcustomerswhospecializeinstandardproduction(theso-calledOriginalEquipment
Manufacturers).Customer-specificinventoriesarealsomaintainedforlargeprojects.
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 11
Technical information for pipes and tubes
Technical information
1 General factors for conversion
General factors for conversion From metric to imperial multiply
Pressure and stress
Energy Sundry conversion factors
Joule=Nm kgf/m ft/lb cal
Joule=N/m 1 0,102 0,737 0,239
kgf/m 9,807 1 7,233 2,342
ft/lb 1,356 0,138 1 0,324
cal 4,19 0,427 3,090 1
Contents - Inhoud
1 barrel 159 litres
1 UK gal 4,55 litres
1 US gal 3,785 litres
Volume
1 in3 16,3871 cm3
1 yd3 0,7646 m3
1 ft3 0,0283 m3
Weight/mass - Gewichten/massa
1 lb 0,454 kg
1 cwt 50,80 kg
1 (long) ton 1016 kg
1 short ton 907,2 kg
Area - Oppervlakte
1 in2 6,45 cm2
1 ft2 0,0929 m2
1 yd2 0,836 m2
1 acre 4047 m2
1 sq. mile 2,5899 km2
Lengths - Lengtematen
1 inch 25,4 mm 0,0254 m
1 foot 304,8 mm 0,3048 m
1 yard 914,4 mm 0,9144 m
1 mile 1609 m 1,609 km
1 nautical mile 1852 m 1,852 km
Contents - Inhoud
ltr x 0,0063 barrel
ltr x 0,22 UK gal
ltr x 0,2642 US gal
Volume
cm3 x 0,06102 in3
m3 x 35,3147 ft3
m3 x 1,3079 yd3
Weight/mass - Gewichten/massa
1 kg x 2,2046 lb
1 kg x 0,0197 cwt
1 kg x 0,0009842 (long) ton
1 kg x 0,0011023 short ton
Area - Oppervlakte
cm2 x 0,155 in2
m2 x 10,764 ft2
m2 x 1,196 yd2
m2 x 0,0002471 acre
km2 x 0,386 sq. mile
Lengths - Lengtematen
1 mm 0,0394 inch
1 m 3,2808 ft
1 m 1,0936 yd
1 km 0,6215 mile
1 km 0,5399 nautical mile
N/m2=Pa N/mm2=MPa Bar Atm=kgf/cm2 kgf/mm2 lb/in2 (psi) Ksi
N/m2 = Pa 1 10-6 10-5 10,2 x 10-6 0.102 x 10-6 145,0 x 10-6 0,145
N/mm2 = Mpa 106 1 10 10,2 0,102 145,0 0,145 x 106
Bar 105 0,10 1 1,02 0,0102 14,5 0,145 x 105
atm = kgf/cm2 98070 0,09807 0,9807 1 0,01 14,22 0,01422
kgf/mm2 9,807 x 106 9,807 98,07 100 1 1422 1,422
lb/in2 (psi) 6895 6895 x 10-6 6895 x 10-5 0,0703 703 x 10-6 1 10-3
KSI 6,895 x 106 6,895 0,6895 x 10-5 70,3 0,703 x 10-6 1000 1
1 km/ltr = 2,8225 mpg 1 mpg = 0,3536 km/ltr
1kg = 0,1573 stone 1 stone = 6,3503 kg
1kg/m = 0,67197 lb/ft 1 lb/ft = 1,4882 kg/m
12 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Technical information for pipes and tubes
3 Overview most important Euronorms for pipe and tube
Execution Norm Steel grade
Welded DIN 1626 St.37.0
Welded DIN 1626 St.52.0
Welded BS 3059-1 ERW 320
Seamless DIN 1629 St.37.0
Seamless DIN 1629 St.52.0
Seamless DIN 17175 St.35.8/1
Seamless ASTM A106* Grade B
Seamless ASTM A333* Grade 6
Execution Norm Steel grade
Welded EN 10217-1 P235 TR2
Welded EN 10217-3 P355N
Welded EN 10217-2 P195 GH
Seamless EN 10216-1 P235 TR2
Seamless EN 10216-3 P355N
Seamless EN 10216-2 P235 GH
Seamless EN 10216-2 P265 GH
Seamless EN 10216-4 P265NL
Pipes for pressure applications
* API and ASTM standards will remain valid and will not be replaced by Euronorms in the near future
Execution Norm Steel grade
Welded DIN 17120 St.37.2
Welded DIN 17120 St.52.3
Seamless DIN 17121 St.37.2
Seamless DIN 17121 St.52.3
Execution Norm Steel grade
Welded EN 10219-1/2 S235 JRH
Welded EN 10219-1/2 S355 J2H
Seamless EN 10210-1/2 S235 JRH
Seamless EN 10210-1/2 S355 J2H
Pipes for construction applications
Execution Norm Steel grade
Welded API 5L* Grade B
Welded API 5L* Grade X52
Seamless API 5L* Grade B
Seamless API 5L* Grade X52
Execution Norm Steel grade
Welded EN 10208-2 L245NB
Welded EN 10208-2 L360NB
Seamless EN 10208-2 L245NB
Seamless EN 10208-2 L360NB
Pipes for pipeline applications
Execution Norm Steel grade
Hollow bar ISO 2938 20MnV6
Seamless DIN 17121 St.52.3
Execution Norm Steel grade
Hollow bar EN 10294-1 E470
Seamless EN 10297-1 E355
Pipes for mechanical applications
Execution Norm Steel grade
Welded DIN 2394 RSt.34-2
Welded DIN 2395 St.33
Welded DIN 2395 St.37.2
Execution Norm Steel grade
Welded EN 10305-3 E195+CR2
Welded EN 10305-5 E190+CR1
Welded EN 10305-5 E235+CR1
Pipes for precision applications
Old New
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 13
Technical information for pipes and tubes
3 Standards and steel qualities
a. Notes to the Euronorms and associated steel qualities for seamless pipes
The standards used in the past such as the DIN 17121, DIN 1629, DIN 2448 and the DIN 17175 have since been mostly replaced by
Euronorms. The Euronorms clearly distinguish the pipe’s area of application. Consequently different standards now exist for pipes
used as construction materials, pipelines or for mechanical engineering applications.
This distinction was not as clear in the past. For example, the old St.52.0 quality was derived from the DIN 1629 standard which
was intended for pipeline systems and mechanical engineering applications. This quality was also often used for steel structures,
however.
The information below explains the main standards and steel qualities under the new system of standards.
Seamless circular pipes and tubes for pressure applicationsThe EN 10216 Euronorm replaces the old DIN 17175 and 1629 standards. This standard is designed for pipes used in pressure
applications, such as a pipeline. This is why the associated steel qualities are designated by the letter P for ‘Pressure’. The
value that follows this letter designates the minimum yield strength. The subsequent letter designations provide additional
information.
The EN 10216 comprises several parts. The parts that are relevant to us are as follows:
EN 10216 Part 1: non-alloy pipes with specified properties at room temperature
EN 10216 Part 2: non-alloy pipes with specified properties at higher temperatures
EN 10216 Part 3: alloy pipes made from fine-grained steel for any temperature
Some examples:
a. EN 10216-1, Quality P235TR2 (formerly DIN 1629, St.37.0)
P = Pressure
235 = minimum yield strength in N/mm2
TR2 = quality with specified properties relating to aluminum content, impact values and inspection and test requirements. (In
contrast to TR1, for which this is not specified).
b. EN 10216-2, Quality P235 GH (formerly DIN 17175, St.35.8 Cl. 1, boiler pipe)
P = Pressure
235 = minimum yield strength in N/mm2
GH = tested properties at higher temperatures
c. EN 10216-3, Quality P355 N (more or less equivalent to DIN 1629, St.52.0)
P = Pressure
355 = minimum yield strength in N/mm2
N = normalized*
* Normalized is defined as: normalized (warm) rolled or standard annealing (at a min temperature of 930°C). This applies to all
qualities designated by the letter ‘N’ in the new Euro Standards.
14 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Technical information for pipes and tubes
Seamless circular pipes and tubes for the mechanical engineering and machining industryThe EN 10297 Euronorm is specifically designed for these applications. The standard consequently replaces the more general DIN
17121 standard used in the past. The pipes are primarily used in the mechanical engineering and hydraulics sector, where the
pipes are treated, turned, milled, etc. The steel quality designations therefore start with the letter E for ‘Engineering’.
Some examples:
a. EN 10297, Quality E355+AR (formerly DIN 17121, St.52.3)
E = Engineering
355 = minimum yield strength in N/mm2
AR = as rolled, with no further heat treatment
b. EN 10297, Quality E355+N (formerly DIN 17121, St.52.3N)
E = Engineering
355 = minimum yield strength in N/mm2
N = normalized (hot-formed or normally annealed)
There is another Euronorm in this area, specifically designed for the machining industry: EN 10294. This standard is used for
machine engineering steel that in the past was designated as 20MnV6, MW 450 or Mecaval 147M, for example. The common
quality designation according to this standard is E 470. This steel quality offers several advantages over the E355+N making it even
more suitable for turning, such as more precise tolerances, more homogeneous steel quality, higher tensile strength and reduced
eccentricity.
Seamless circular pipes and tubes for construction applicationsThe EN 10210 Euronorm was developed some time ago and aside from its application to circular pipes, also applies to square and
rectangular hot-formed hollow sections. This standard was specifically developed for steel construction applications. The steel
quality is therefore designated with the letter S for ‘Structural’.
An example:
EN 10210, Quality S355 J2H (formerly DIN 17121, St.52.3N)
S = Structural
355 = minimum yield strength in N/mm2
J2 = minimum average impact value: 27 Joules at -20°C
H = Hollow section
This quality replaces the former St.52.3N quality. This does not imply, however, that the pipes are always annealed. The mill is
required to guarantee that the required mechanical properties are attained. Depending on the mill’s production process and the
pipe’s wall thickness, post-annealing may or may not be required.
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 15
Technical information for pipes and tubes
b. Notes to the Euro Standards and associated steel qualities for welded pipes
The DIN 1626, 17120 and DIN 2394 standards used in the past have since been mostly dropped and replaced by Euronorms.
The Euronorms clearly distinguish the pipe’s area of application. Consequently different standards now exist for pipes used as
construction materials and pipelines or in applications requiring precision materials.
This distinction was not as clear in the past. The former DIN 1626, St.37.0 quality for pipelines was at times also used for steel
structures. The most important Euronorms and steel qualities are highlighted below.
Welded cicrular pipes and tubes for pressure applicationsThe EN 10217 Euro Standard replaces the old DIN 1626 standard. This standard is designed for welded pipes used in pressure
applications, such as pipelines. This is why the associated steel qualities are designated by the letter P for ‘Pressure’. The value that
follows this letter designates the minimum yield strength. The subsequent letter designations provide additional information.
The EN 10217 comprises several parts. The parts that are relevant to us are as follows:
EN 10217 Part 1: non-alloy pipes with specified properties at room temperature
EN 10217 Part 2: alloy and non-alloy pipes with specified properties at higher temperatures
EN 10217 Part 3: alloy pipes made of fine-grained steel
Some examples:
a. EN 10217-1, Quality P235TR2 (formerly DIN 1626, St.37.0)
P = pressure
235 = minimum yield strength in N/mm2
TR2 = quality with specified properties relating to aluminum content, impact values and inspection and test requirements.
(In contrast to TR1, for which this is not specified).
b. EN 10217-2, Quality P195 GH (now still: BS 3059, ERW 320)
P = Pressure
195 = minimum yield strength in N/mm2
GH = properties at higher temperatures
c. EN 10217-3, Quality P355N (formerly DIN 1626, St.52.0)
P = Pressure
355 = minimum yield strength in N/mm2
N = normalized*
* Normalized is defined as: normalized (hot) rolled or normally annealed (at a min temperature of 930°C). This applies to all
qualities designated by the letter ‘N’ in the new Euronorms.
16 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Technical information for pipes and tubes
Welded cicrular pipes and tubes for construction applicationsThe EN 10210, as well as the EN 10219 standard can be used for circular pipes and tubes used in construction applications. The
only difference between these two standards is that the EN 10210 applies to hot-formed pipes and the EN 10219 applies to cold-
formed pipes. The manufacturing process is at the discretion of the producer. In actual practice, cold-formed pipes manufactured
according to EN 10219 are almost always welded. Hot-formed pipes manufactured according to EN 10210 are available in seamless,
as well as welded versions. The materials for these standards are designated using the letter S for ‘Structural Steel’.
Both standards comprise 2 parts. Part 1 contains the technical delivery conditions and Part 2 contains the dimensions, tolerances
and static values.
Some examples:
a. EN 10210 / 10219-1/2, S235JRH (formerly DIN 17120, St.37-2)
S = Structural
235 = minimum yield strength in N/mm2
JR = specified impact values at room temperature
H = hollow section (in this case a round hollow section)
b. EN 10210 / 10219-1/2, S355J2H (formerly DIN 17120, St.52.3)
S = Structural
355 = minimum yield strength in N/mm2
J2 = specified impact values at -20°C
H = hollow section (in this case a round hollow section)
Welded circular precision pipes and tubesThe DIN 2394 was the usual standard for this application. This standard has been or will shortly be replaced by the EN 10305. This
standard comprises 6 parts, focused on specific uses (hydraulics, pneumatics) or manufacturing processes (cold-drawn, welded,
seamless) or shape (circular or square-rectangular). Only Part 3 applies to our product portfolio: welded and calibrated circular
pipes and tubes for precision applications. Precision pipes are generally used in the hydraulics and pneumatics sectors and the
steel qualities are therefore designated with the letter E for ‘Engineering’.
An example:
EN 10305-3, E235+CR1 (formerly: DIN 2394, RSt.34-2)
E = Engineering
235 = minimum yield strength in N/mm2
CR1 = suitable for post-annealing (in contrast to CR2)
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 17
Technical information for pipes and tubes
Nominal
pipe size
inches
O.D.
mm
Standard
STD
Wall
Standard
STD
Wt
Extra strong
XS
Wall
Extra strong
XS
Wt
Double
extra strong
XXS
Wall
Double
extra strong
XXS
Wt
Schedule
10
Wall
Schedule
10
Wt
Schedule
20
Wall
Schedule
20
Wt
Schedule
30
Wall
Schedule
30
Wt
1/8” 10,3 1,7 0,357 2,4 0,470
1/4” 13,7 2,2 0,625 3,0 0,804
3/8” 17,1 2,3 0,848 3,2 1,10
1/2” 21,3 2,8 1,26 3,7 1,62 7,5 2,54
3/4” 26,7 2,9 1,68 3,9 2,19 7,8 3,63
1” 33,4 3,4 2,50 4,5 3,23 9,1 5,45
1.1/4” 42,2 3,6 3,38 4,9 4,46 9,7 7,75
1.1/2” 48,3 3,7 4,05 5,1 5,40 10,2 9,54
2” 60,3 3,9 5,43 5,5 7,47 11,1 13,4
2.1/2” 73 5,2 8,62 7,0 11,4 14 20,4
3” 88,9 5,5 11,3 7,6 15,3 15,2 27,7
3.1/2” 101,6 5,7 13,6 8,1 18,6 16,2 34
4” 114,3 6 16,1 8,6 22,3 17,1 41,1
5” 141,3 6,6 21,8 9,5 30,9 19 57,4
6” 168,3 7,1 28,2 11,0 42,5 21,9 79,1
8” 219,1 8,2 42,5 12,7 64,6 22,2 108 6,4 33,3 7 36,7
10” 273 9,3 60,2 12,7 81,5 25,4 155 6,4 41,7 7,8 50,9
12” 323,9 9,5 73,8 12,7 97,4 25,4 187 6,4 49,7 8,4 65,1
14” 355,6 9,5 81,2 12,7 107 6,4 54,6 7,9 68,1 9,5 81,2
16” 406,4 9,5 93,1 12,7 123 6,4 62,6 7,9 77,9 9,5 93,1
18” 457,2 9,5 105 12,7 139 6,4 70,5 7,9 87,8 11,1 122
20” 508 9,5 117 12,7 155 6,4 78,5 9,5 117 12,7 155
22” 558,8 9,5 129 12,7 171 6,4 86,4 9,5 129 12,7 171
24” 609,6 9,5 141 12,7 187 6,4 94,7 9,5 141 14,3 210
26” 660,4 9,5 153 12,7 203 7,9 128 12,7 203
28” 711,2 9,5 165 12,7 219 7,9 138 12,7 219 15,9 272
30” 762 9,5 176 12,7 234 7,9 147 12,7 234 15,9 292
32” 812,8 9,5 188 12,7 250 7,9 157 12,7 250 15,9 312
34” 863,6 9,5 200 12,7 266 7,9 167 12,7 266 15,9 332
36” 914,4 9,5 212 12,7 282 7,9 177 12,7 282 15,9 351
4 Pipe schedules and wall thicknesses in inch/mm and weights
ASME B 36.10 PIPE SCHEDULES
Wall = Wallthickness in millimeters
WT = Weights in kilogram per meter
18 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Technical information for pipes and tubes
Nominal
pipe size
O.D.
mm
Schedule
40
Wall
Schedule
40
Wt
Schedule
60
Wall
Schedule
60
Wt
Schedule
80
Wall
Schedule
80
Wt
Schedule
100
Wall
Schedule
100
Wt
Schedule
120
Wall
Schedule
120
Wt
Schedule
140
Wall
Schedule
140
Wt
Schedule
160
Wall
Schedule
160
Wt
1/8” 10,3 1,7 0,357 2,4 0,470
1/4” 13,7 2,2 0,625 3,0 0,804
3/8” 17,1 2,3 0,848 3,2 1,10
1/2” 21,3 2,8 1,26 3,7 1,62 4,8 1,9
3/4” 26,7 2,9 1,68 3,9 2,19 5,6 2,89
1” 33,4 3,4 2,50 4,5 3,23 6,4 4,23
1.1/4” 42,2 3,6 3,38 4,9 4,46 6,4 5,6
1.1/2” 48,3 3,7 4,05 5,1 5,40 7,1 7,23
2” 60,3 3,9 5,43 5,5 7,47 8,7 11,1
2.1/2” 73 5,2 8,62 7,0 11,4 9,5 14,9
3” 88,9 5,5 11,3 7,6 15,3 11,1 21,3
3.1/2” 101,6 5,7 13,6 8,1 18,6
4” 114,3 6 16,1 8,6 22,3 11,1 28,3 13,5 33,5
5” 141,3 6,6 21,8 9,5 30,9 12,7 40,2 15,9 49,0
6” 168,3 7,1 28,2 11,0 42,5 14,3 54,2 18,3 67,5
8” 219,1 8,2 42,5 10,3 53,1 12,7 64,6 15,1 75,8 18,3 90,7 20,6 101 23,0 112
10” 273 9,3 60,2 12,7 81,5 15,1 95,8 18,3 115 21,4 133 25,4 156 28,6 172
12” 323,9 10,3 79,7 14,3 109 17,4 132 21,4 160 25,4 187 28,6 208 33,3 239
14” 355,6 11,1 94,3 15,1 126 19,0 158 23,8 195 27,8 224 31,8 253 35,7 281
16” 406,4 12,7 123 16,7 160 21,4 203 26,2 245 30,9 286 36,5 333 40,5 365
18” 457,2 14,3 156 19 206 23,8 254 29,4 310 34,9 363 39,7 408 45,2 459
20” 508 15,1 183 20,6 248 26,2 311 32,5 381 38,1 441 44,4 508 50,0 564
22” 558,8 22,2 294 28,6 373 34,9 451 41,3 526 47,6 600 54,0 671
24” 609,6 17,4 255 24,6 355 30,9 441 38,9 547 46,0 639 52,4 719 59,5 807
26” 660,4
28” 711,2
30” 762
32” 812,8
34” 863,6
36” 914,4
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 19
Product descriptions for pipes and tubes
Product descriptions
VL Code Norm Steel grade Product description
110 EN 10216-1 / EN 10210-1 P235 TR2 / S235 JRH Seamless steel normal wall tubes according to EN 10216-1 steel grade P235 TR2
and to EN 10210-1 steel grade S235 JRH with AD-W4 requirements, pressure
tested, with plain ends. Sizes with OD ≥ 51 mm paint stencilled with heat
number. If desired with inspection certificate to EN 10204/3.1. Ditto, but outside
shotblasted SA 2,5 and painted, without heat number.
113 EN 10216-2 / DIN 2448 P235 GH / St.35.8 Class I Seamless steel boiler tubes according to EN 10216-2 steel grade P235 GH or DIN
2448 steel grade St.35.8 Class I to DIN 17175 TRD 102 and AD-W4, pressure
tested, with plain ends. Sizes with OD ≥ 26,9 mm also stamped with heat number.
If desired with inspection certificate to EN 10204/3.1.
120 EN 10216-1 P235 TR2 Seamless heavy wall tubes according to EN 10216-1 steel grade P235 TR2 and
EN 10210-1, steel grade S235 JRH, with AD-W4, pressure tested, with plain
ends. Sizes with OD ≥ 51 mm paint stencilled with heat number. If desired with
inspection certificate to EN 10204/3.1.
125 EN 10210-1 / EN 10297-1 S355 J2H / E355 Seamless heavy wall tubes according to EN 10210-1 steel grade S355 J2H and
EN 10297-1, steel grade E355. Pressure tested, with plain ends. Impact tested at
-20 °C, for wall thicknesses ≥ 6 mm. Outside paint stencilled with heat number.
If desired with inspection certificate to EN 10204/3.1.Dimension range up to and
incl. 168,3 mm OD.
126 EN 10210-1 / EN 10297-1 S355 J2H / E355 Ditto, however dimension range from OD 177,8 mm up to and incl. 406,4 mm.
127 EN 10210-1 / EN 10297-1 S355 J2H / E355 Ditto, however dimension range > 406,4 mm OD.
126 DIN 17121 MW 450 (20MnV6) Seamless steel heavy wall tubes according to DIN 17121, steel grade MW450
(20MnV6) to material sheet 03R/05.93. Normalised and impact tested at -20 °C
to DIN 17121. Eddy Current tested to SEP 1925, with plain ends. Outside paint
stencilled with heat number. If desired with inspection certificate to EN 10204/3.1.
Dimension range from OD 177,8 mm up to and incl. 406,4 mm.
127 EN 10210-1 / DIN 1629 S355 J2H / St.52.0 Seamless heavy wall tubes according to EN 10210-1 steel grade S355 J2H and DIN
1629 steel grade St.52.0 with AD-W4. Pressure tested and impact tested at -20
°C, with plain ends. Outside paint stencilled with heat number. If desired with
inspection certificate to EN 10204/3.1. Dimension range > 406,4 mm OD.
1 Seamless steel pipes and tubes
VL codes 110 up to and incl. 181
20 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Product descriptions for pipes and tubes
VL Code Norm Steel grade Product description
140 A/SA 106 Gr. B Seamless steel pipes according to ASTM A-106/SA-106 grade B and ASTM A530/
ASME SA 530 with additional requirements to ASME section II part D table Y1,
NACE MR 0175 and NACE 1030. C-content max. 0,22%, C-equivalent max. 0,41%
as per long formula, outside oiled. Sizes with OD ≥ 26,7 mm stamped with “round
nose tools” with heat number, steel grade, dimension and mill symbol. Sizes with
OD ≥ 60,3 mm with bevelled ends to A106 par. 19.1.2 note 9 (30° -0/+5°), however
with plain ends for wall thickness ≥ 25,4 mm. If desired with inspection certificate
to EN 10204/3.1.
150 ASTM/ASME
A-SA333
Gr.6 / LT45 Seamless steel pipes according to ASTM A-333M/SA-333M grade 6 LT 45 with
additional requirements to ASME section II part A, NACE MR 0175 and NACE 1030,
pressure tested to norm. Pipes normalised as per “fine grain practice” with a grain
size of min. 6 to ASTM E 112. C-content max. 0,20%, C-equivalent max. 0,41% as
per long formula, with impact test Charpy V notch at -45 °C (average value min. 27
Joule), outside oiled. Sizes with OD ≥ 26,7 mm stamped with “round nose tools”
with heat number, steel grade, dimension and mill symbol. Sizes with OD ≥ 60,3
mm with bevelled ends to ANSI B16.25 fig. 2a/3a, however with plain ends for wall
thickness ≥ 25,4 mm. If desired with inspection certificate to EN 10204/3.1.
170 API Spec. 5L
ASTM/ASME
A-SA106
Gr. B
Gr. B
Seamless steel pipes according to API Spec. 5L grade B /ASTM A-106/ASTM
A530 / ASME SA-106/SA530 Grade B to ASME section II part A, with additional
requirements to NACE MR 0175 and NACE 1030. Pressure tested as per API 5L jan.
2000 PSL 1 and A-SA 530. C-content max. 0,22%, C-equivalent max. 0,41% as per
long formula, outside oiled. Sizes with OD ≥ 26,7 mm stamped with “round nose
tools” with heat number, steel grade, dimension, mill symbol and API monogram.
Sizes with OD ≥ 60,3 mm with bevelled ends to A106 par. 19.1.2 note 9 (30°
-0/+5°), however with plain ends for wall thickness ≥ 25,4 mm. If desired with
inspection certificate to EN 10204/3.1.
174 API /A/SA 106 Grade B galvanised
threaded & coupl.
Seamless steel tubes according to API Spec. 5L / ASTM A 106 grade B, with
threaded and coupled ends as per API 5L, hot-dipped galvanised to ASTM A53,
pressure tested to the norm. If desired with inspection certificate to EN 10204/3.1.
181 EN 10294-1 E 470AR Seamless hollow bar according to EN 10294-1, steel grade A470 AR (as rolled).
Tubes are especially suitable for machining. With plain ends. If desired with
inspection certificate to EN 10204/3.1.
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 21
Product descriptions for pipes and tubes
2 Welded steel pipes and tubes
VL codes 210 up to and incl. 430
VL Code Norm Steel grade Product description
210 EN 10217-1 P235 TR1 grooved Welded normal wall steel tubes according to EN 10217-1, steel grade P235 TR1, black, not
oiled, with a groove for a groove coupling system
211 EN 10219-1/2
“greenhouse tube”
S185 / S235 JRH Welded light wall steel tubes (greenhouse tubes) according to EN 10219-1, steel grade
S185 or S235 JRH, leak tested, with plain ends. If desired with test report to EN 10204/2.2.
Execution black or electrolytic zinc plated
211 EN 10219-1/2
DIN 1626
S235 JRH /
St.37.0
Welded light wall steel tubes according to EN 10219-1 steel grade S235 JRH or to DIN
1626 steel grade St.37.0. Leak tested, with plain ends. If desired with test report to EN
10204/2.2.
212 EN 10219-1/2 S235 JRH Welded heavy wall steel tubes up to and incl. OD 127 mm, according to EN 10219-1,
material grade S235 JRH. Leak tested, with plain ends. If desired with test report to EN
10204/2.2.
212 DIN 1626 /
EN 10219-1
St.37.0 Welded heavy wall steel tubes > OD 127 mm, according to EN 10219-1 material grade
S235 JRH or DIN 1626 steel grade St.37.0. Leak tested as per DIN 1626, with plain ends. If
desired with test report to EN 10204/2.2.
213 EN 10219-1/
DIN 1626
S235 JRH /
St.37.0
Welded normal wall steel tubes according to EN 10219-1 steel grade S235 JRH or to DIN
1626 steel grade St.37.0, leak tested, with plain ends. If desired with test report to EN
10204/2.2. Also in coated execution: shotblasted and painted or painted only.
217 EN 10219-1/2 S355 J2H Welded heavy wall tubes according to EN 10219-1, steel grade S355 J2H, impact tested at
-20 °C. If desired with inspection certificate to EN 10204/3.1.
219 BS 3059-1 ERW 320 HF longitudinally welded steel boiler tubes according to BS 3059/87 part 1, steel grade
ERW 320 or to EN 10217-2 steel grade P195 GH, weld efficiency factor V=1, internal weld
seam removed, normalised, tensile strength max. 440 N/mm². Leak tested to the norm,
with plain ends covered with plastic caps. If desired with inspection certificate to EN
10204/3.1.
220 EN 10255 S195T / Poly 3 Plus Welded steel gaspipes according to EN 10255 steel grade S195T. Pressure tested at 50
bar or Eddy Current tested to EN 10246-1. Outside shotblasted SA 2,5 and coated with
polyethylene, colour yellow, layer thickness min. 1,8 mm (Install Poly 3 Plus), with plain
ends or threaded and coupled ends, provided with KIWA Gastec marking.
230 EN 10255 S195T “gas” Welded steel gaspipes according to EN 10255, steel grade S195T. Pressure tested at 50
bar or Eddy Current tested to EN 10246-1. Execution black or hot-dipped galvanised. Ends
plain or threaded and coupled.
231 EN 10219-1/2
EN 10210-1/2
S235 JRH
“construction”
Welded steel construction pipes according to EN 10210/10219-1/2, steel grade S235 JRH,
execution black or hot-dipped galvanised. Ends plain or threaded and coupled.
231 EN 10255
Type L2
S195T
“Class A”
Welded steel pipes type L2 according to EN 10255, steel grade S195T. Pressure tested at
50 bar or Eddy Current tested to EN 10246-1. Execution black, hot-dipped galvanised or
electrolytic zinc plated to EN 10240. Ends plain or threaded and coupled.
22 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Product descriptions for pipes and tubes
VL Code Norm Steel grade Product description
232 EN 10219 S235 JRH Welded steel pipes according to EN 10219-1, steel grade S235 JRH, not leak tested, black,
with plain ends
232 EN 10255 S195T Welded steel gaspipes according to EN 10255, steel grade S195T, cold formed, leak tested,
hot-dipped galvanised, with plain ends
233 EN 10219 S235 JRH Welded steel pipes according to EN 10219-1, steel grade S235 JRH, not leak tested, black,
with plain ends
233 EN 10255 S195T Welded steel pipes Type L2 according to EN 10255, steel grade S195T, cold formed, leak
tested, hot-dipped galvanised, with plain ends
239 EN 10255 medium S195T (INSTALL) Welded steel gaspipes (INSTALL medium) according to EN 10255, steel grade S195T. Pres-
sure tested at 50 bar or Eddy Current tested to EN 10246-1. Execution black, hot-dipped
galvanised, electrolytic zinc plated, shotblasted and painted or painted only. Ends plain or
threaded and coupled.
239 EN 10255 heavy S195T (INSTALL) Welded steel steampipes (INSTALL heavy) according to EN 10255, steel grade S195T. Pres-
sure tested at 50 bar or Eddy Current tested to EN 10246-1. Execution black or electrolytic
zinc plated, with plain ends.
271 API Spec. 5L Gr. B In- and outside submerged arc longitudinally welded pipes (SAW) according to API 5L grade
B, with additional requirements to NACE MR 0175. C-content max. 0,22%, C-equivalent max.
0,41% as per long formula. Weld efficiency factor V=1. Pressure tested to the norm, with bevel-
led ends, stamped with heat number, if desired with inspection certificate to EN 10204/3.1.
280 API Spec. 5L
ASTMA 53
Gr.B / X42 /
A53
Electric resistance welded pipes (ERW) according to API 5L PSL 1 grade B / X42 / ASTM
A53M type E grade B, with additional requirements to NACE MR 0175, pressure test based
on grade X42, weld efficiency factor V=1, weld seam annealed. C-content max. 0,22%,
C-equivalent max. 0,41% as per long formula, with bevelled ends. Outside stamped
with heat number, steel grade, mill name and API monogram. If desired with inspection
certificate to EN 10204/3.1.
281 API Spec. 5L /
EN 10217 /
EN 10219
Gr.B /
P265TR2 /
S275J0H
Electric resistance welded pipes (ERW) according to API 5L PSL 1 grade B, to EN 10217
steel grade P265 TR2 and to EN 10219 steel grade S275J0H, with additional requirements
to NACE MR 0175 and MR 0103. C-content max. 0,22%, C-equivalent max. 0,41% as per
long formula, with bevelled ends. Outside stamped with heat number, steel grade, mill
name and API monogram. If desired with inspection certificate to EN 10204/3.1.
290 DIN 2394 St.34.2 KB Welded steel precision tubes according to DIN 2394, cold formed, from cold rolled strip,
steel grade St.34-2, execution BKM (bright), with plain ends
290 DIN 2394 St.34.2 Welded steel precision tubes according to DIN 2394, cold formed, from hot rolled un-
pickled strip, steel grade St.34-2, execution M, with plain ends
290 DIN 2394 St.34.2 GWB Welded steel precision tubes according to DIN 2394, cold formed, from hot rolled pickled
strip, steel grade St.34-2, execution BKM (bright), with plain ends
295 DIN 2394 LEBU heating pipes St.34-2 Welded steel LEBU heating pipes according to DIN 2394, execution BKM (bright), high
gloss electrolytic zinc plated, with plain ends
430 EN 39 EN 39 Welded steel scaffolding tubes, steel grade and tolerances according to EN 39, hot-dipped
galvanised as per EN 10240 table 2, steel grade B2, with plain, deburred ends.
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 23
Pipes and Tubes
Pipes and Tubes
24 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Delivery programme pipes and tubesDimensions and weights
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
2004 12 1 290 EN 10305-3 E220+CR2 S3(COLD) bright plain 6 0.271
2006 12 1 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 0.271
2319 13 1 290 EN 10305-3 E220+CR2 S3(COLD) bright plain 6 0.296
2328 13 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.425
2491 13.7 2.35 1/4 230 EN 10255 M bl not oil plain 6 0.650
2718 15 1 290 EN 10305-3 E220+CR2 S3(COLD) bright plain 6 0.345
2721 15 1.2 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6/10 0.408
92240 15 1.2 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 0.408
2722 15 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.499
2724 15 1.5 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 0.499
2970 16 1.2 290 EN 10305-3 E220+CR2 S3(COLD) bright plain 6 0.438
3003 16 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.536
3008 16 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.691
23331 17.2 1.8 3/8 231 EN 10255 L2 galvanized plain 6 0.714
33741 17.2 1.8 3/8 231 EN 10255 L2 bl not oil plain 6 0.674
6404 17.2 2.35 3/8 230 EN 10255 M bl not oil plain 6 0.852
6406 17.2 2.35 3/8 230 EN 10255 M galvanized plain 6 0.903
6405 17.2 2.35 3/8 239 EN 10255 M Install bl not oil plain 6 0.852
6408 17.2 2.35 3/8 239 galvanized plain 6 0.903
6409 17.2 2.35 3/8 239 shbl paint plain 6 0.852
6413 17.2 2.35 3/8 239 galvanized T and C 6 0.909
68993 17.2 2.9 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 1.020
3326 18 1 290 EN 10305-3 E220+CR2 S3(COLD) bright plain 6 0.419
36265 18 1.2 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 0.497
3342 18 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.610
3391 19 1 290 EN 10305-3 E220+CR2 S3(COLD) bright plain 6 0.444
3394 19 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.647
3397 19 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.838
4010 20 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.684
4027 20 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.888
68997 20 2.9 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 1.220
68999 20 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 1.580
69000 20 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 1.850
4270 21.3 2 110 EN 10216-1 P235TR2 bl not oil plain SRL 0.952
4271 21.3 2 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 0.952
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 25
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
23332 21.3 2 1/2 231 EN 10255 L2 galvanized plain 6 1.020
24550 21.3 2 1/2 231 EN 10255 L2 bl not oil plain 6 0.952
142592 21.3 2 1/2 233 EN 10219 S235JRH bl not oil plain 6 0.952
4272 21.3 2.6 120 EN 10216-1 P235TR2 bl not oil plain SRL 1.200
1832 21.3 2.65 1/2 220 poly plain 6 1.220
1838 21.3 2.65 1/2 230 EN 10255 M bl not oil plain 6 1.220
1841 21.3 2.65 1/2 230 EN 10255 M galvanized plain 6 1.270
85198 21.3 2.65 1/2 232 EN 10255 M CF galvanized plain 6 1.270
1840 21.3 2.65 1/2 239 EN 10255 M Install bl not oil plain 6 1.220
1842 21.3 2.65 1/2 239 EN 10255 M Install el zinc pl plain 6 1.220
1843 21.3 2.65 1/2 239 galvanized plain 6 1.270
1844 21.3 2.65 1/2 239 shbl paint plain 6 1.220
1847 21.3 2.65 1/2 239 EN 10255 M Install bl not oil T and C 6 1.230
1849 21.3 2.65 1/2 239 galvanized T and C 6 1.300
1850 21.3 2.65 1/2 239 shbl paint T and C 6 1.230
4275 21.3 2.8 1/2 STD 150 A333 A333/6LT45 bl oiled plain SRL 1.270
4276 21.3 2.8 1/2 STD 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 1.270
75176 21.3 2.8 1/2 STD 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 1.270
4277 21.3 2.8 1/2 STD 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 1.350
4280 21.3 3.2 120 EN 10216-1 P235TR2 bl not oil plain SRL 1.430
1852 21.3 3.25 1/2 239 EN 10255 H Install bl not oil plain 6 1.450
4284 21.3 3.7 1/2 XS 150 A333 A333/6LT45 bl oiled plain SRL 1.620
4285 21.3 3.7 1/2 XS 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 1.620
75142 21.3 3.7 1/2 XS 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 1.620
4286 21.3 3.7 1/2 XS 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 1.700
69005 21.3 4 1/2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 1.710
73882 21.3 4.8 1/2 S160 150 ASTM A106/A333 GR.B/GR.6 bl oiled plain SRL 1.950
69006 21.3 5 1/2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.010
34549 21.3 7.5 1/2 XXS 150 ASTM A106/A333 GR.B/GR.6 bl oiled plain SRL 2.550
4448 22 1.2 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6/10 0.616
92241 22 1.2 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 0.616
4453 22 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.758
4454 22 1.5 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 0.758
4459 22 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.986
4824 25 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.869
4831 25 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.134
69010 25 2.9 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 1.580
4846 25 3 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.628
67711 25 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.070
67716 25 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.910
4892 25.4 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 0.884
4895 25.4 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.150
26 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
4914 26 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.180
4971 26.7 2.9 3/4 STD 150 A333 A333/6LT45 bl oiled plain SRL 1.690
4972 26.7 2.9 3/4 STD 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 1.690
75143 26.7 2.9 3/4 STD 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 1.690
4973 26.7 2.9 3/4 STD 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 1.770
4980 26.7 3.9 3/4 XS 150 A333 A333/6LT45 bl oiled plain SRL 2.200
4981 26.7 3.9 3/4 XS 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 2.200
75144 26.7 3.9 3/4 XS 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 2.200
4982 26.7 3.9 3/4 XS 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 2.320
73883 26.7 5.6 3/4 S160 150 ASTM A106/A333 GR.B/GR.6 bl oiled plain SRL 2.900
34550 26.7 7.8 3/4 XXS 150 ASTM A106/A333 GR.B/GR.6 bl oiled plain SRL 3.640
5026 26.9 2.3 110 EN 10216-1 P235TR2 bl not oil plain SRL 1.400
5027 26.9 2.3 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 1.400
6105 26.9 2.35 3/4 231 EN 10255 L2 bl not oil plain 6 1.410
6109 26.9 2.35 3/4 231 EN 10255 L2 galvanized T and C 6 1.500
31765 26.9 2.35 3/4 231 EN 10255 L2 galvanized plain 6 1.470
54329 26.9 2.35 3/4 233 EN 10219 S235JRH bl not oil plain 6 1.420
5028 26.9 2.6 120 EN 10216-1 P235TR2 bl not oil plain SRL 1.560
6100 26.9 2.65 3/4 220 poly plain 6 1.580
6110 26.9 2.65 3/4 230 EN 10255 M bl not oil plain 6 1.580
6112 26.9 2.65 3/4 230 EN 10255 M galvanized plain 6 1.650
85199 26.9 2.65 3/4 232 EN 10255 M CF galvanized plain 6 1.650
6111 26.9 2.65 3/4 239 EN 10255 M Install bl not oil plain 6 1.580
6113 26.9 2.65 3/4 239 EN 10255 M Install el zinc pl plain 6 1.580
6114 26.9 2.65 3/4 239 galvanized plain 6 1.650
6115 26.9 2.65 3/4 239 shbl paint plain 6 1.580
6118 26.9 2.65 3/4 239 EN 10255 M Install bl not oil T and C 6 1.590
6120 26.9 2.65 3/4 239 galvanized T and C 6 1.690
6121 26.9 2.65 3/4 239 shbl paint T and C 6 1.590
67718 26.9 2.9 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 1.720
5031 26.9 3.2 120 EN 10216-1 P235TR2 bl not oil plain SRL 1.870
6123 26.9 3.25 3/4 239 EN 10255 H Install bl not oil plain 6 1.900
5033 26.9 4 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 2.260
69013 26.9 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.260
69014 26.9 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.700
69015 26.9 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.200
5161 28 1.2 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 0.793
5165 28 1.5 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 0.980
69018 28 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.840
5581 30 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.050
5584 30 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.380
69019 30 2.9 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 1.940
67724 30 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.560
67725 30 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.080
69020 30 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.680
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 27
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
123508 30 7.5 181 EN 10294-1 E470 bl not oil plain SRL 5.317
69022 30 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.340
5652 31.8 2 211 EN 10219 S235JRH bl not oil plain 6 1.470
101594 31.8 2 211 EN 10219 S235JRH bl not oil plain 9 1.470
5656 31.8 2.6 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 1.870
69023 31.8 2.9 125 EN 10210 S355J2H bl not oil plain SRL 2.070
67729 31.8 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.740
5665 31.8 4.5 120 EN 10216-1 P235TR2 bl not oil plain SRL 3.030
67731 31.8 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.300
67734 31.8 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.320
67735 31.8 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.700
5679 32 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.130
5685 32 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.480
5688 32 3 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 2.150
5824 33.4 3.4 1 STD 150 A333 A333/6LT45 bl oiled plain SRL 2.500
5825 33.4 3.4 1 STD 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 2.500
75145 33.4 3.4 1 STD 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 2.500
5826 33.4 3.4 1 STD 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 2.630
5832 33.4 4.5 1 XS 150 A333 A333/6LT45 bl oiled plain SRL 3.240
5833 33.4 4.5 1 XS 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 3.240
75149 33.4 4.5 1 XS 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 3.240
5834 33.4 4.5 1 XS 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 3.410
5843 33.4 6.4 1 S160 150 A333 A333/6LT45 bl oiled plain SRL 4.240
5844 33.4 6.4 1 S160 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 4.240
34551 33.4 9.1 1 XXS 150 ASTM A106/A333 GR.B/GR.6 bl oiled plain SRL 5.450
5848 33.4 9.1 1 XXS 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 5.450
249 33.7 2.25 1 231 EN 10219 bl not oil plain 6 1.734
250 33.7 2.25 1 231 EN 10219 galvanized plain 6 1.830
5883 33.7 2.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 1.990
5884 33.7 2.6 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 1.990
5886 33.7 2.6 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 1.990
253 33.7 2.65 1 231 EN 10255 L2 bl not oil plain 6 2.010
256 33.7 2.65 1 231 EN 10255 L2 galvanized T and C 6 2.150
31048 33.7 2.65 1 231 EN 10255 L2 galvanized plain 6 2.130
54330 33.7 2.65 1 233 EN 10219 S235JRH bl not oil plain 6 2.010
81852 33.7 2.65 1 233 EN 10255 L2 CF galvanized plain 6 2.100
5891 33.7 3.2 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 2.410
5890 33.7 3.2 120 EN 10216-1 P235TR2 bl not oil plain SRL 2.410
5892 33.7 3.2 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 2.410
247 33.7 3.25 1 220 poly plain 6 2.440
257 33.7 3.25 1 230 EN 10255 M bl not oil plain 6 2.440
259 33.7 3.25 1 230 EN 10255 M galvanized plain 6 2.550
120986 33.7 3.25 230 EN 10255 M galvanized T and C 6 2.610
74640 33.7 3.25 1 232 EN 10255 M CF galvanized plain 6 2.550
81965 33.7 3.25 1 232 EN 10219 S235JRH bl not oil plain 6 2.440
28 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
258 33.7 3.25 1 239 EN 10255 M Install bl not oil plain 6 2.440
260 33.7 3.25 1 239 EN 10255 M Install el zinc pl plain 6 2.440
261 33.7 3.25 1 239 galvanized plain 6 2.550
262 33.7 3.25 1 239 shbl paint plain 6 2.440
268 33.7 3.25 1 239 EN 10255 M Install bl not oil T and C 6 2.460
270 33.7 3.25 1 239 galvanized T and C 6 2.610
271 33.7 3.25 1 239 shbl paint T and C 6 2.460
5893 33.7 3.6 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 2.670
5894 33.7 4 120 EN 10216-1 P235TR2 bl not oil plain SRL 2.930
273 33.7 4.05 1 239 EN 10255 H Install bl not oil plain 6 2.970
69024 33.7 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.540
75093 33.7 5 212 EN 10219 S235JRH bl not oil plain 6 3.540
122755 33.7 5 212 EN 10219 S275J0H galvanized plain 6 3.540
6227 35 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.240
6228 35 1.5 295 DIN 2394 heating pipe R.ST34.2 el zinc pl plain 6 1.240
6230 35 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.630
6239 35 2.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 2.080
69026 35 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.060
69028 35 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.700
123724 35 5 181 EN 10294-1 E470 bl not oil plain SRL 5.092
69030 35 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.460
69031 35 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.890
123509 35 7.5 181 EN 10294-1 E470 bl not oil plain SRL 6.411
69032 35 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.330
69033 35 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 6.170
6424 38 2 211 EN 10219 S235JRH bl not oil plain 6 1.780
6426 38 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.780
74771 38 2.25 211 EN 10219 S235JRH bl not oil plain 9 1.980
122757 38 2.25 213 S500MC powdercoat plain 10 1.980
6433 38 2.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 2.270
6434 38 2.6 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 2.270
6435 38 2.6 213 EN 10219 S235JRH bl not oil plain 6 2.270
69035 38 3.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 2.750
67742 38 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.350
6444 38 4 212 EN 10219 S235JRH bl not oil plain 6 3.350
67743 38 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.070
67745 38 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.930
69037 38 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.410
67746 38 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.920
67748 38 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 6.910
6827 40 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.870
123726 40 5 181 EN 10294-1 E470 bl not oil plain SRL 5.853
123727 40 7.5 181 EN 10294-1 E470 bl not oil plain SRL 7.505
123578 40 10 181 EN 10294-1 E470 bl not oil plain SRL 8.671
6987 42.2 3.6 1.1/4 STD 150 A333 A333/6LT45 bl oiled plain SRL 3.390
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 29
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
6988 42.2 3.6 1.1/4 STD 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 3.390
75150 42.2 3.6 1.1/4 STD 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 3.390
6989 42.2 3.6 1.1/4 STD 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 3.570
6991 42.2 4.8 1.1/4 XS 150 A333 A333/6LT45 bl oiled plain SRL 4.470
6992 42.2 4.8 1.1/4 XS 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 4.470
75146 42.2 4.8 1.1/4 XS 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 4.470
6993 42.2 4.8 1.1/4 XS 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 4.710
119737 42.2 6.4 1.1/4 S160 150 A333 A333/6LT45 bl oiled plain SRL 5.610
73364 42.2 6.4 1.1/4 S160 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 5.610
119738 42.2 9.7 1.1/4 XXS 150 A333 A333/6LT45 bl oiled plain SRL 7.770
117206 42.2 9.7 1.1/4 XXS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 7.770
1428 42.4 2.25 1.1/4 231 EN 10219 bl not oil plain 6 2.217
1429 42.4 2.25 1.1/4 231 EN 10219 galvanized plain 6 2.350
7022 42.4 2.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 2.550
7023 42.4 2.6 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 2.550
7024 42.4 2.6 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 2.550
23370 42.4 2.65 1.1/4 231 EN 10255 L2 bl not oil plain 6 2.580
31767 42.4 2.65 1.1/4 231 EN 10255 L2 galvanized plain 6 2.690
54331 42.4 2.65 1.1/4 233 EN 10219 S235JRH bl not oil plain 6 2.580
81853 42.4 2.65 1.1/4 233 EN 10255 L2 CF galvanized plain 6 2.690
7026 42.4 3.2 120 EN 10216-1 P235TR2 bl not oil plain SRL 3.090
7027 42.4 3.2 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 3.090
1426 42.4 3.25 1.1/4 220 poly plain 6 3.140
1427 42.4 3.25 1.1/4 220 poly T and C 6 3.170
1435 42.4 3.25 1.1/4 230 EN 10255 M bl not oil plain 6 3.140
1437 42.4 3.25 1.1/4 230 EN 10255 M galvanized plain 6 3.280
36342 42.4 3.25 1.1/4 232 EN 10219 S235JRH bl not oil plain 6 3.140
1436 42.4 3.25 1.1/4 239 EN 10255 M Install bl not oil plain 6 3.140
1438 42.4 3.25 1.1/4 239 EN 10255 M Install el zinc pl plain 6 3.140
1439 42.4 3.25 1.1/4 239 galvanized plain 6 3.280
1440 42.4 3.25 1.1/4 239 shbl paint plain 6 3.140
1445 42.4 3.25 1.1/4 239 EN 10255 M Install bl not oil T and C 6 3.170
1447 42.4 3.25 1.1/4 239 galvanized T and C 6 3.360
1448 42.4 3.25 1.1/4 239 shbl paint T and C 6 3.170
7033 42.4 4 120 EN 10216-1 P235TR2 bl not oil plain SRL 3.790
142977 42.4 4 217 EN 10219 S355J2H bl not oil plain 6 3.790
7035 42.4 4 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 3.790
1450 42.4 4.05 1.1/4 239 EN 10255 H Install bl not oil plain 6 3.840
67750 42.4 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.610
7037 42.4 5 212 EN 10219 S235JRH bl not oil plain 6 4.610
67751 42.4 5.6 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.080
67752 42.4 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.610
125548 42.4 7.1 120 EN 10216-1 P235TR2 bl not oil plain SRL 6.180
67754 42.4 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 6.790
67755 42.4 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.990
7063 44.5 2 211 EN 10219 S235JRH bl not oil plain 6,40 2.100
7066 44.5 2.25 211 EN 10219 S235JRH bl not oil plain 7 2.340
39418 44.5 2.25 211 EN 10219 S235JRH bl not oil plain 9 2.340
30 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
93922 44.5 2.25 211 EN 10219 S235JRH bl not oil plain 10 2.340
7067 44.5 2.3 213 EN 10219 S235JRH bl not oil plain 6 2.390
7072 44.5 2.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 2.690
7074 44.5 2.6 213 EN 10219 S235JRH bl not oil plain 6 2.690
67758 44.5 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.870
67760 44.5 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.940
67762 44.5 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 6.550
67763 44.5 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.200
67765 44.5 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 8.510
69042 44.5 11 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 9.090
67766 44.5 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 9.860
123510 45 7.5 181 EN 10294-1 E470 bl not oil plain SRL 8.688
1140 48.3 2.5 1.1/2 231 EN 10219 bl not oil plain 6 2.811
1141 48.3 2.5 1.1/2 231 EN 10219 galvanized plain 6 2.980
7226 48.3 2.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 2.930
7228 48.3 2.6 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 2.930
7230 48.3 2.6 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 2.930
1145 48.3 2.9 1.1/2 231 EN 10255 L2 galvanized plain 6 3.400
24950 48.3 2.9 1.1/2 231 EN 10255 L2 bl not oil plain 6 3.250
54332 48.3 2.9 1.1/2 233 EN 10219 S235JRH bl not oil plain 6 3.250
57004 48.3 2.9 1.1/2 233 EN 10255 L2 CF galvanized plain 6 3.400
7233 48.3 3.2 120 EN 10216-1 P235TR2 bl not oil plain SRL 3.560
32278 48.3 3.2 430 EN39/2001 S235GT galvanized 6 3.830
1138 48.3 3.25 1.1/2 220 poly plain 6 3.610
1139 48.3 3.25 1.1/2 220 poly T and C 6 3.650
1147 48.3 3.25 1.1/2 230 EN 10255 M bl not oil plain 6 3.610
1149 48.3 3.25 1.1/2 230 EN 10255 M galvanized plain 6 3.770
81851 48.3 3.25 1.1/2 232 EN 10255 M CF galvanized plain 6 3.770
81966 48.3 3.25 1.1/2 232 EN 10219 S235JRH bl not oil plain 6 3.610
1148 48.3 3.25 1.1/2 239 EN 10255 M Install bl not oil plain 6 3.610
1150 48.3 3.25 1.1/2 239 EN 10255 M Install el zinc pl plain 6 3.610
1151 48.3 3.25 1.1/2 239 galvanized plain 6 3.770
1152 48.3 3.25 1.1/2 239 shbl paint plain 6 3.610
1156 48.3 3.25 1.1/2 239 EN 10255 M Install bl not oil T and C 6 3.650
1158 48.3 3.25 1.1/2 239 galvanized T and C 6 3.870
1159 48.3 3.25 1.1/2 239 shbl paint T and C 6 3.650
7242 48.3 3.7 1.1/2 STD 150 A333 A333/6LT45 bl oiled plain SRL 4.050
7243 48.3 3.7 1.1/2 STD 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 4.050
75147 48.3 3.7 1.1/2 STD 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 4.050
7244 48.3 3.7 1.1/2 STD 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 4.240
7246 48.3 4 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 4.370
7245 48.3 4 120 EN 10216-1 P235TR2 bl not oil plain SRL 4.370
141762 48.3 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain DRL 4.370
143219 48.3 4 212 EN 10219 S235JRH bl not oil plain 6 4.370
142978 48.3 4 217 EN 10219 S355J2H bl not oil plain 6 4.370
7248 48.3 4 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 4.370
142655 48.3 4.05 1.1/2 230 EN 10255 H bl not oil plain 6 4.430
1161 48.3 4.05 1.1/2 239 EN 10255 H Install bl not oil plain 6 4.430
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 31
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
69043 48.3 4.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.860
69044 48.3 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.340
7255 48.3 5 212 EN 10219 S235JRH bl not oil plain 6 5.340
7256 48.3 5 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 5.340
7260 48.3 5.1 1.1/2 XS 150 A333 A333/6LT45 bl oiled plain SRL 5.410
7261 48.3 5.1 1.1/2 XS 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 5.410
75148 48.3 5.1 1.1/2 XS 171 API 5L/ASTM A106 GR.B bl oiled plain SRL 5.410
7262 48.3 5.1 1.1/2 XS 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 5.660
67771 48.3 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 6.530
7266 48.3 6.3 212 EN 10219 S235JRH bl not oil plain 6 6.530
69045 48.3 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.210
7274 48.3 7.1 1.1/2 S160 150 A333 A333/6LT45 bl oiled plain SRL 7.250
7275 48.3 7.1 1.1/2 S160 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 7.250
67772 48.3 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.950
67773 48.3 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 9.450
119739 48.3 10.2 1.1/2 XXS 150 A333 A333/6LT45 bl oiled plain SRL 9.560
7222 48.3 10.2 1.1/2 XXS 170 API 5L/ASTM A106 Gr.B bl oiled plain SRL 9.560
67775 48.3 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 11.000
7382 50 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 1.790
123511 50 7.5 181 EN 10294-1 E470 bl not oil plain SRL 9.872
123579 50 10 181 EN 10294-1 E470 bl not oil plain SRL 11.829
7542 51 2 211 EN 10219 S235JRH bl not oil plain 6 2.420
7545 51 2.25 211 EN 10219 S235JRH bl not oil plain 7 2.710
7546 51 2.25 211 EN 10219 S235JRH bl not oil plain 9 2.710
7548 51 2.25 211 EN 10219 S235JRH el zinc pl plain 7 2.710
74666 51 2.25 211 EN 10219 S235JRH bl not oil plain 10 2.710
108266 51 2.25 211 EN 10219 S235JRH galvanized plain 7 2.710
7550 51 2.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 3.100
7551 51 2.6 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 3.100
7553 51 2.6 213 EN 10219 S235JRH bl not oil plain 6 3.100
69047 51 2.9 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.440
124427 51 2.9 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain DRL 3.440
106208 51 2.9 212 EN 10219 S235JRH bl not oil plain 6 3.440
67776 51 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.640
7559 51 4 212 EN 10219 S235JRH bl not oil plain 6 4.640
67777 51 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.670
7562 51 5 212 EN 10219 S235JRH bl not oil plain 6 5.670
67778 51 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 6.940
67779 51 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.690
67780 51 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 8.480
67781 51 8.8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 9.160
67782 51 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 10.100
67783 51 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 11.900
67784 51 14.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 12.900
7583 54 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 2.570
69048 54 2.9 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 3.650
32 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
69049 54 3.6 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.470
69050 54 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 4.930
67785 54 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 6.040
69051 54 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.410
69052 54 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 8.210
69053 54 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 10.900
123512 55 7.5 181 EN 10294-1 E470 bl not oil plain SRL 11.615
123513 55 10 181 EN 10294-1 E470 bl not oil plain SRL 13.905
123580 55 12.5 181 EN 10294-1 E470 bl not oil plain SRL 15.901
7634 57 2 211 EN 10219 S235JRH bl not oil plain 6 2.710
7637 57 2.25 211 EN 10219 S235JRH bl not oil plain 6,40 3.040
55175 57 2.25 211 EN 10219 S235JRH bl not oil plain 9 3.040
7640 57 2.6 213 EN 10219 S235JRH bl not oil plain 6 3.490
7641 57 2.9 110 EN 10216-1 P235TR2 bl not oil plain SRL 3.870
7646 57 2.9 213 EN 10219 S235JRH bl not oil plain 6 3.870
37823 57 2.9 213 EN 10219 S235JRH bl not oil plain 12 3.870
7651 57 3.2 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 4.250
67788 57 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.230
141763 57 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain DRL 6.410
69056 57 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.880
67791 57 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 8.740
67792 57 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 9.670
69057 57 8.8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 10.500
67793 57 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 11.600
67794 57 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 13.700
67796 57 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 16.200
8120 60.3 2 211 EN 10219 S235JRH bl not oil plain 6 2.880
8122 60.3 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 2.880
8123 60.3 2.25 211 EN 10219 S235JRH bl not oil plain 6,40 3.220
3693 60.3 2.5 2 231 EN 10219 bl not oil plain 6 3.539
8124 60.3 2.9 110 EN 10216-1 P235TR2 bl not oil plain SRL 4.110
8126 60.3 2.9 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 4.110
8127 60.3 2.9 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 4.110
8130 60.3 2.9 213 EN 10219 S235JRH bl not oil plain 6 4.110
8131 60.3 2.9 213 EN 10219 S235JRH bl not oil plain 12 4.110
114483 60.3 2.9 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 6 4.110
8134 60.3 2.9 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 4.110
3697 60.3 2.9 2 231 EN 10255 L2 galvanized plain 6 4.310
31049 60.3 2.9 2 231 EN 10255 L2 bl not oil plain 6 4.110
57005 60.3 2.9 2 233 EN 10255 L2 CF galvanized plain 6 4.310
81964 60.3 2.9 2 233 EN 10219 S235JRH bl not oil plain 6 4.110
8135 60.3 3.2 212 EN 10219 S235JRH bl not oil plain 6 4.510
8139 60.3 3.6 120 EN 10216-1 P235TR2 bl not oil plain SRL 5.030
8140 60.3 3.6 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 5.030
3691 60.3 3.65 2 220 poly plain 6 5.100
3692 60.3 3.65 2 220 poly T and C 6 5.170
3699 60.3 3.65 2 230 EN 10255 M bl not oil plain 6 5.100
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 33
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
3701 60.3 3.65 2 230 EN 10255 M galvanized plain 6 5.330
83892 60.3 3.65 2 232 EN 10255 M CF galvanized plain 6 5.330
93926 60.3 3.65 2 232 EN 10219 S235JRH bl not oil plain 6 5.100
3700 60.3 3.65 2 239 EN 10255 M Install bl not oil plain 6 5.100
3702 60.3 3.65 2 239 EN 10255 M Install el zinc pl plain 6 5.100
3703 60.3 3.65 2 239 galvanized plain 6 5.330
3704 60.3 3.65 2 239 shbl paint plain 6 5.100
3707 60.3 3.65 2 239 EN 10255 M Install bl not oil T and C 6 5.170
3709 60.3 3.65 2 239 galvanized T and C 6 5.480
3710 60.3 3.65 2 239 shbl paint T and C 6 5.170
8148 60.3 3.9 2 STD 150 A333 A333/6LT45 bl oiled bevelled SRL 5.440
8149 60.3 3.9 2 STD 150 A333 A333/6LT45 bl oiled bevelled DRL 5.440
8150 60.3 3.9 2 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 5.440
8152 60.3 3.9 2 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 5.440
76929 60.3 3.9 2 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled SRL 5.440
76930 60.3 3.9 2 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 5.440
8154 60.3 3.9 2 STD 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 5.730
8159 60.3 4 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 5.550
67798 60.3 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.550
8161 60.3 4 212 EN 10219 S235JRH bl not oil plain 6 5.550
8163 60.3 4 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 5.550
8167 60.3 4.5 120 EN 10216-1 P235TR2 bl not oil plain SRL 6.190
3712 60.3 4.5 2 239 EN 10255 H Install bl not oil plain 6 6.170
67800 60.3 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 6.820
8174 60.3 5 212 EN 10219 S235JRH bl not oil plain 6 6.820
143534 60.3 5 212 EN 10219 S235JRH bl not oil plain 12 6.820
142979 60.3 5 217 EN 10219 S355J2H bl not oil plain 12 6.820
8176 60.3 5 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 6.820
8184 60.3 5.5 2 XS 150 A333 A333/6LT45 bl oiled bevelled SRL 7.480
8185 60.3 5.5 2 XS 150 A333 A333/6LT45 bl oiled bevelled DRL 7.480
8187 60.3 5.5 2 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 7.480
9185 60.3 5.5 2 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 7.480
76931 60.3 5.5 2 XS 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 7.480
76932 60.3 5.5 2 XS 171 API 5L/ASTM A106 GR.B bl oiled bevelled SRL 7.480
8191 60.3 5.5 2 XS 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 7.930
69058 60.3 5.6 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.550
67802 60.3 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 8.390
8199 60.3 6.3 212 EN 10219 S235JRH bl not oil plain 6 8.390
67803 60.3 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 9.320
67804 60.3 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 10.300
8205 60.3 8.7 2 S160 150 A333 A333/6LT45 bl oiled bevelled SRL 11.110
8207 60.3 8.7 2 S160 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 11.110
67805 60.3 8.8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 11.200
67806 60.3 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 12.400
8112 60.3 11.1 2 XXS 150 A333 A333/6LT45 bl oiled bevelled SRL 13.440
8113 60.3 11.1 2 XXS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 13.440
67808 60.3 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 14.700
67809 60.3 14.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 16.100
34 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
67810 60.3 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 17.500
8279 63.5 2.25 211 EN 10219 S235JRH bl not oil plain 6,40 3.400
8281 63.5 2.9 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 4.330
8283 63.5 2.9 213 EN 10219 S235JRH bl not oil plain 6 4.330
85496 63.5 3.2 113 EN 10216-2 P235GH TC1 bl not oil plain 10,5- 4.760
69224 63.5 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 5.870
8290 63.5 4 212 EN 10219 S235JRH bl not oil plain 6 5.870
67812 63.5 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.210
141764 63.5 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain DRL 7.210
8293 63.5 5 212 EN 10219 S235JRH bl not oil plain 6 7.210
141765 63.5 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain DRL 8.890
67815 63.5 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 10.900
141766 63.5 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain DRL 10.900
67817 63.5 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 13.200
67819 63.5 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 15.700
67820 63.5 14.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 17.300
67821 63.5 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 18.700
123581 65 12.5 181 EN 10294-1 E470 bl not oil plain SRL 19.300
123582 65 15 181 EN 10294-1 E470 bl not oil plain SRL 21.377
8316 70 2 211 EN 10219 S235JRH bl not oil plain 6 3.350
8319 70 2.5 211 EN 10219 S235JRH bl not oil plain 6,40 4.160
8320 70 2.9 110 EN 10216-1 P235TR2 bl not oil plain SRL 4.800
8321 70 2.9 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 4.800
8323 70 2.9 213 EN 10219 S235JRH bl not oil plain 6 4.800
8325 70 2.9 213 EN 10219 S235JRH bl not oil plain 12 4.800
8332 70 3.2 113 EN 10216-2 P235GH TC1 bl not oil plain RL 5.270
69059 70 3.6 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 5.900
67824 70 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 6.510
8339 70 4 212 EN 10219 S235JRH bl not oil plain 6 6.510
67825 70 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 8.010
8355 70 5 212 EN 10219 S235JRH bl not oil plain 6 8.010
67826 70 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 9.900
8362 70 6.3 212 EN 10219 S235JRH bl not oil plain 6 9.900
67827 70 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 11.000
123729 70 7.5 181 EN 10294-1 E470 bl not oil plain SRL 14.607
67828 70 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 12.200
67829 70 8.8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 13.300
67830 70 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 14.800
67832 70 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 17.700
123730 70 12.5 181 EN 10294-1 E470 bl not oil plain SRL 20.927
67833 70 14.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 19.500
123514 70 15 181 EN 10294-1 E470 bl not oil plain SRL 23.484
67834 70 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 21.300
67835 70 17.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 22.700
8401 73 5.2 2.1/2 STD 150 A333 A333/6LT45 bl oiled bevelled SRL 8.630
8402 73 5.2 2.1/2 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 8.630
76933 73 5.2 2.1/2 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled SRL 8.630
119740 73 7 2.1/2 XS 150 A333 A333/6LT45 bl oiled bevelled DRL 11.410
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 35
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
8406 73 7 2.1/2 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 11.410
119741 73 9.5 2.1/2 S160 150 A333 A333/6LT45 bl oiled bevelled DRL 14.920
73365 73 9.5 2.1/2 S160 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 14.920
103226 73 10 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 15.500
119742 73 14 2.1/2 XXS 150 A333 A333/6LT45 bl oiled bevelled DRL 20.390
117208 73 14 2.1/2 XXS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 20.390
123583 75 12.5 181 EN 10294-1 E470 bl not oil plain SRL 22.789
123753 75 15 181 EN 10294-1 E470 bl not oil plain SRL 25.678
8412 76 1.5 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 2.760
8451 76.1 2 211 EN 10219 S235JRH bl not oil plain 6 3.650
8453 76.1 2.5 211 EN 10219 S235JRH bl not oil plain 6,40 4.540
143652 76.1 2.5 213 EN 10219 S235JRH bl not oil plain 12 4.540
8454 76.1 2.9 110 EN 10216-1 P235TR2 bl not oil plain SRL 5.240
8456 76.1 2.9 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 5.240
23537 76.1 2.9 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 5.240
8459 76.1 2.9 213 EN 10219 S235JRH bl not oil plain 6 5.240
8461 76.1 2.9 213 EN 10219 S235JRH bl not oil plain 12 5.240
8462 76.1 2.9 213 EN 10219 S235JRH bl not oil plain 10 5.240
39500 76.1 2.9 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 6 5.240
8466 76.1 2.9 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 5.240
8467 76.1 3.2 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 5.750
23371 76.1 3.25 2.1/2 231 EN 10255 L2 bl not oil plain 6 5.800
33743 76.1 3.25 2.1/2 231 EN 10255 L2 galvanized plain 6 5.980
117778 76.1 3.25 2.1/2 233 EN 10219 S235JRH bl not oil plain 6 5.840
8469 76.1 3.6 120 EN 10216-1 P235TR2 bl not oil plain SRL 6.440
8470 76.1 3.6 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 6.440
4192 76.1 3.65 2.1/2 220 poly plain 6 6.510
4197 76.1 3.65 2.1/2 230 EN 10255 M bl not oil plain 6 6.510
4199 76.1 3.65 2.1/2 230 EN 10255 M galvanized plain 6 6.800
145294 76.1 3.65 2.1/2 230 EN 10255 M galvanized T and C 6 7.020
4198 76.1 3.65 2.1/2 239 EN 10255 M Install bl not oil plain 6 6.510
4200 76.1 3.65 2.1/2 239 galvanized plain 6 6.800
4201 76.1 3.65 2.1/2 239 shbl paint plain 6 6.510
4205 76.1 3.65 2.1/2 239 galvanized T and C 6 7.020
84850 76.1 4 113 EN 10216-2 P235GH TC1 bl not oil plain RL 7.110
67839 76.1 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.110
8475 76.1 4 212 EN 10219 S235JRH bl not oil plain 6 7.110
110459 76.1 4 212 EN 10219 S235JRH bl not oil plain 12 7.110
8478 76.1 4.5 120 EN 10216-1 P235TR2 bl not oil plain SRL 7.950
4207 76.1 4.5 2.1/2 239 EN 10255 H Install bl not oil plain 6 7.900
8484 76.1 5 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 8.770
67841 76.1 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 8.770
8485 76.1 5 212 EN 10219 S235JRH bl not oil plain 6 8.770
8486 76.1 5 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 8.770
8487 76.1 5.6 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 9.740
67843 76.1 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 10.800
8495 76.1 6.3 212 EN 10219 S235JRH bl not oil plain 6 10.800
36 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
67844 76.1 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 12.100
8497 76.1 7.1 212 EN 10219 S235JRH bl not oil plain 6 12.100
67845 76.1 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 13.400
67846 76.1 8.8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain DRL 14.600
67847 76.1 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 16.300
67849 76.1 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 19.600
67850 76.1 14.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 21.700
67851 76.1 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 23.700
67852 76.1 17.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 25.300
67853 76.1 20 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 27.700
123515 80 10 181 EN 10294-1 E470 bl not oil plain SRL 20.800
123584 80 15 181 EN 10294-1 E470 bl not oil plain SRL 27.273
123585 80 20 181 EN 10294-1 E470 bl not oil plain SRL 32.555
8895 82.5 2.5 211 EN 10219 S235JRH bl not oil plain 6,40 4.930
8896 82.5 3.2 110 EN 10216-1 P235TR2 bl not oil plain SRL 6.260
8897 82.5 3.2 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 6.260
8898 82.5 3.2 213 EN 10219 S235JRH bl not oil plain 6 6.260
67854 82.5 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 7.740
67856 82.5 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 9.560
8903 82.5 5 212 EN 10219 S235JRH bl not oil plain 6 9.560
67858 82.5 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 11.800
8905 82.5 6.3 212 EN 10219 S235JRH bl not oil plain 6 11.800
67860 82.5 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 14.700
69061 82.5 8.8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 16.000
67861 82.5 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 17.900
67862 82.5 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 21.600
67863 82.5 14.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 23.900
67864 82.5 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 26.200
67865 82.5 17.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 28.100
67866 82.5 20 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 30.800
123754 85 10 181 EN 10294-1 E470 bl not oil plain SRL 22.400
123755 85 15 181 EN 10294-1 E470 bl not oil plain SRL 29.400
123516 85 20 181 EN 10294-1 E470 bl not oil plain SRL 35.305
8957 88.9 2 211 EN 10219 S235JRH bl not oil plain 6 4.290
8961 88.9 2.5 211 EN 10219 S235JRH bl not oil plain 6,40 5.330
8962 88.9 2.9 213 EN 10219 S235JRH bl not oil plain 6 6.150
8964 88.9 3.2 110 EN 10216-1 P235TR2 bl not oil plain SRL 6.760
8966 88.9 3.2 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 6.760
8967 88.9 3.2 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 6.760
8969 88.9 3.2 213 EN 10219 S235JRH bl not oil plain 6 6.760
8970 88.9 3.2 213 EN 10219 S235JRH bl not oil plain 12 6.760
39501 88.9 3.2 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 6 6.760
8974 88.9 3.2 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 6.760
23373 88.9 3.25 3 231 EN 10255 L2 bl not oil plain 6 6.810
31768 88.9 3.25 3 231 EN 10255 L2 galvanized plain 6 7.040
8976 88.9 3.6 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 7.570
8978 88.9 4 120 EN 10216-1 P235TR2 bl not oil plain SRL 8.380
8979 88.9 4 120 EN 10216-1 P235TR2 bl not oil plain DRL 8.380
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 37
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
8983 88.9 4 212 EN 10219 S235JRH bl not oil plain 12 8.380
5414 88.9 4.05 3 220 poly plain 6 8.470
137925 88.9 4.05 220 EN 10255 M Install poly T and C 6 8.640
5418 88.9 4.05 3 230 EN 10255 M bl not oil plain 6 8.470
5420 88.9 4.05 3 230 EN 10255 M galvanized plain 6 8.850
5419 88.9 4.05 3 239 EN 10255 M Install bl not oil plain 6 8.470
5421 88.9 4.05 3 239 galvanized plain 6 8.850
5422 88.9 4.05 3 239 shbl paint plain 6 8.470
5426 88.9 4.05 3 239 galvanized T and C 6 9.150
125845 88.9 4.05 239 EN 10255 M Install bl not oil T and C 6 8.640
8986 88.9 4.5 120 EN 10216-1 P235TR2 bl not oil plain SRL 9.370
5428 88.9 4.85 3 239 EN 10255 H Install bl not oil plain 6 10.100
67870 88.9 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 10.300
8992 88.9 5 212 EN 10219 S235JRH bl not oil plain 12 10.300
142980 88.9 5 217 EN 10219 S355J2H bl not oil plain 12 10.300
8994 88.9 5 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 10.300
9000 88.9 5.5 3 STD 150 A333 A333/6LT45 bl oiled bevelled DRL 11.290
9001 88.9 5.5 3 STD 150 A333 A333/6LT45 bl oiled bevelled SRL 11.290
9002 88.9 5.5 3 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 11.290
9004 88.9 5.5 3 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 11.290
76934 88.9 5.5 3 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 11.290
76935 88.9 5.5 3 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled SRL 11.290
9006 88.9 5.5 3 STD 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 11.920
9014 88.9 5.6 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 11.500
67871 88.9 5.6 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 11.500
9016 88.9 5.6 212 EN 10219 S235JRH bl not oil plain 6 11.500
67872 88.9 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 12.800
9024 88.9 6.3 212 EN 10219 S235JRH bl not oil plain 6 12.800
67873 88.9 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 14.300
9034 88.9 7.6 3 XS 150 A333 A333/6LT45 bl oiled bevelled DRL 15.270
9036 88.9 7.6 3 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 15.270
62412 88.9 7.6 3 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 15.270
76936 88.9 7.6 3 XS 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 15.270
76937 88.9 7.6 3 XS 171 API 5L/ASTM A106 GR.B bl oiled bevelled SRL 15.270
67874 88.9 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 16.000
67875 88.9 8.8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 17.400
67876 88.9 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 19.500
8943 88.9 11.1 3 S160 150 A333 A333/6LT45 bl oiled bevelled DRL 21.350
143072 88.9 11.1 3 S160 150 A333 A333/6LT45 bl oiled bevelled SRL 21.350
8945 88.9 11.1 3 S160 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 21.350
67878 88.9 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 23.600
8954 88.9 15.2 3 XXS 150 A333 A333/6LT45 bl oiled bevelled DRL 27.680
73366 88.9 15.2 3 XXS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 27.680
67880 88.9 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 28.800
67881 88.9 17.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 30.800
67882 88.9 20 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 34.000
8960 88.9 22.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 36.500
38 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
9052 89 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 4.290
123517 90 10 181 EN 10294-1 E470 bl not oil plain SRL 23.600
123756 90 12.5 181 EN 10294-1 E470 bl not oil plain SRL 27.533
123586 90 20 181 EN 10294-1 E470 bl not oil plain SRL 38.600
9122 95 2.75 211 EN 10219 S235JRH bl not oil plain 6,40 6.260
67883 95 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 11.100
67886 95 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 17.200
67887 95 8.8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 18.700
142934 95 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 25.400
67890 95 14.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 28.300
67891 95 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 31.200
67893 95 20 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 37.000
123588 95 22.5 181 EN 10294-1 E470 bl not oil plain SRL 43.965
9121 95 25 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 43.200
123518 100 10 181 EN 10294-1 E470 bl not oil plain SRL 27.100
123757 100 15 181 EN 10294-1 E470 bl not oil plain SRL 36.000
123758 100 20 181 EN 10294-1 E470 bl not oil plain SRL 44.000
801 101.6 2 213 EN 10219 S235JRH bl not oil plain 6 4.910
805 101.6 2.75 211 EN 10219 S235JRH bl not oil plain 6,40 6.700
806 101.6 3.2 213 EN 10219 S235JRH bl not oil plain 6 7.770
808 101.6 3.6 110 EN 10216-1 P235TR2 bl not oil plain DRL 8.700
809 101.6 3.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 8.700
810 101.6 3.6 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 8.700
811 101.6 3.6 213 EN 10219 S235JRH bl not oil plain 6 8.700
812 101.6 3.6 213 EN 10219 S235JRH bl not oil plain 12 8.700
67895 101.6 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 9.630
814 101.6 4 212 EN 10219 S235JRH bl not oil plain 12 9.630
54824 101.6 4 212 EN 10219 S235JRH bl not oil plain 6 9.630
67897 101.6 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 11.900
816 101.6 5 212 EN 10219 S235JRH bl not oil plain 12 11.900
818 101.6 5.7 3.1/2 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 13.570
67899 101.6 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 14.800
821 101.6 6.3 212 EN 10219 S235JRH bl not oil plain 12 14.800
67900 101.6 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 16.500
67901 101.6 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 18.500
825 101.6 8 212 EN 10219 S235JRH bl not oil plain 12 18.500
826 101.6 8.1 3.1/2 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 18.630
67902 101.6 8.8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 20.100
67903 101.6 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 22.600
67905 101.6 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 27.500
67907 101.6 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 33.800
67908 101.6 17.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 36.300
67909 101.6 20 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 40.200
804 101.6 25 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 47.200
10120 101.6 30 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 53.000
830 102 2 290 EN 10305-3 E220+CR2/E235+CR1S2-PICK
bright plain 6 4.930
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 39
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
123760 105 12.5 181 EN 10294-1 E470 bl not oil plain SRL 33.300
123761 105 17.5 181 EN 10294-1 E470 bl not oil plain SRL 42.700
123762 105 22.5 181 EN 10294-1 E470 bl not oil plain SRL 50.700
866 108 2 211 EN 10219 S235JRH bl not oil plain 6 5.230
869 108 2.75 211 EN 10219 S235JRH bl not oil plain 6,40 7.140
128097 108 2.75 211 EN 10219 S235JRH bl not oil plain 6 7.140
874 108 3.6 213 EN 10219 S235JRH bl not oil plain 6 9.270
875 108 3.6 213 EN 10219 S235JRH bl not oil plain 12 9.270
67912 108 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 12.700
881 108 5 212 EN 10219 S235JRH bl not oil plain 12 12.700
67914 108 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 15.800
887 108 6.3 212 EN 10219 S235JRH bl not oil plain 12 15.800
67915 108 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 17.700
67916 108 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 19.700
891 108 8 212 EN 10219 S235JRH bl not oil plain 12 19.700
67918 108 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 24.200
67920 108 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 29.400
67921 108 14.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 32.800
67922 108 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 36.300
67923 108 17.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 39.100
67924 108 20 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 43.400
868 108 25 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 51.200
870 108 30 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 57.700
1542 114.3 2.75 211 EN 10219 S235JRH bl not oil plain 6,40 7.550
1545 114.3 3.2 213 EN 10219 S235JRH bl not oil plain 6 8.770
1546 114.3 3.6 110 EN 10216-1 P235TR2 bl not oil plain DRL 9.830
1547 114.3 3.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 9.830
1549 114.3 3.6 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 9.830
23275 114.3 3.6 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 9.830
1551 114.3 3.6 213 EN 10219 S235JRH bl not oil plain 6 9.830
1552 114.3 3.6 213 EN 10219 S235JRH bl not oil plain 12 9.830
39502 114.3 3.6 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 6 9.830
121178 114.3 3.6 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 9.830
1555 114.3 3.6 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 9.830
33742 114.3 3.65 4 231 EN 10255 L2 bl not oil plain 6 9.890
69063 114.3 4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 10.900
1557 114.3 4.5 120 EN 10216-1 P235TR2 bl not oil plain DRL 12.200
6678 114.3 4.5 4 220 poly plain 6 12.100
6681 114.3 4.5 4 230 EN 10255 M bl not oil plain 6 12.100
6683 114.3 4.5 4 230 EN 10255 M galvanized plain 6 12.600
6682 114.3 4.5 4 239 EN 10255 M Install bl not oil plain 6 12.100
6685 114.3 4.5 4 239 shbl paint plain 6 12.100
6689 114.3 4.5 4 239 galvanized T and C 6 13.100
1560 114.3 4.8 4 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 12.910
1561 114.3 5 120 EN 10216-1 P235TR2 bl not oil plain DRL 13.500
1563 114.3 5 212 EN 10219 S235JRH bl not oil plain 12 13.500
1564 114.3 5 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 13.500
6691 114.3 5.4 4 239 EN 10255 H Install bl not oil plain 6 14.500
40 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
67927 114.3 5.6 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 15.000
1572 114.3 6 4 STD 150 A333 A333/6LT45 bl oiled bevelled DRL 16.070
1573 114.3 6 4 STD 150 A333 A333/6LT45 bl oiled bevelled SRL 16.070
1574 114.3 6 4 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 16.070
1576 114.3 6 4 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 16.070
76938 114.3 6 4 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 16.070
76939 114.3 6 4 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled SRL 16.070
1578 114.3 6 4 STD 174 API 5L/ASTM A106 Gr.B galvanized T and C SRL 17.040
1587 114.3 6.3 113 EN 10216-2 P235GH TC1 bl not oil plain RL 16.800
67928 114.3 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 16.800
1588 114.3 6.3 212 EN 10219 S235JRH bl not oil plain 12 16.800
67929 114.3 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 18.800
67930 114.3 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 21.000
1596 114.3 8 212 EN 10219 S235JRH bl not oil plain 12 21.000
1604 114.3 8.6 4 XS 150 A333 A333/6LT45 bl oiled bevelled DRL 22.320
143073 114.3 8.6 4 XS 150 A333 A333/6LT45 bl oiled bevelled SRL 22.320
1606 114.3 8.6 4 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 22.320
73367 114.3 8.6 4 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 22.320
76940 114.3 8.6 4 XS 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 22.320
76941 114.3 8.6 4 XS 171 API 5L/ASTM A106 GR.B bl oiled bevelled SRL 22.320
67932 114.3 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 25.700
119743 114.3 11.1 4 S120 150 A333 A333/6LT45 bl oiled bevelled DRL 28.320
1519 114.3 11.1 4 S120 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 28.320
67934 114.3 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 31.400
1528 114.3 13.5 4 S160 150 A333 A333/6LT45 bl oiled bevelled DRL 33.540
143074 114.3 13.5 4 S160 150 A333 A333/6LT45 bl oiled bevelled SRL 33.540
1529 114.3 13.5 4 S160 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 33.540
67935 114.3 14.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 35.100
67936 114.3 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 38.800
1536 114.3 17.1 4 XXS 150 A333 A333/6LT45 bl oiled bevelled DRL 41.030
143076 114.3 17.1 4 XXS 150 A333 A333/6LT45 bl oiled bevelled SRL 41.030
1538 114.3 17.1 4 XXS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 41.030
67937 114.3 17.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 41.800
69064 114.3 20 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 46.500
1541 114.3 25 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 55.100
1544 114.3 30 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 62.400
123519 115 17.5 181 EN 10294-1 E470 bl not oil plain SRL 47.600
123589 115 25 181 EN 10294-1 E470 bl not oil plain SRL 61.000
123590 120 15 181 EN 10294-1 E470 bl not oil plain SRL 44.700
123520 120 20 181 EN 10294-1 E470 bl not oil plain SRL 55.300
123591 120 25 181 EN 10294-1 E470 bl not oil plain SRL 64.500
2259 121 3 211 EN 10219 S235JRH bl not oil plain 6,40 8.730
2263 121 4 213 EN 10219 S235JRH bl not oil plain 6 11.500
2264 121 4 213 EN 10219 S235JRH bl not oil plain 12 11.500
67938 121 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 14.300
2266 121 5 212 EN 10219 S235JRH bl not oil plain 12 14.300
69065 121 5.6 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 15.900
67939 121 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 17.800
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 41
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
2269 121 6.3 212 EN 10219 S235JRH bl not oil plain 12 17.800
67940 121 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 22.300
2272 121 8 212 EN 10219 S235JRH bl not oil plain 12 22.300
67942 121 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 27.400
67944 121 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 33.400
67946 121 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 41.400
67947 121 17.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 44.700
67948 121 20 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 49.800
2258 121 25 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 59.200
138445 121 28 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 64.200
2260 121 30 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 67.300
138446 121 32 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 70.200
138447 121 36 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 75.500
123592 125 12.5 181 EN 10294-1 E470 bl not oil plain SRL 41.100
123521 125 17.5 181 EN 10294-1 E470 bl not oil plain SRL 53.000
123593 125 25 181 EN 10294-1 E470 bl not oil plain SRL 68.400
2302 127 3 211 EN 10219 S235JRH bl not oil plain 6,40 9.170
2306 127 4 110 EN 10216-1 P235TR2 bl not oil plain DRL 12.100
2307 127 4 110 EN 10216-1 P235TR2 bl not oil plain SRL 12.100
2308 127 4 213 EN 10219 S235JRH bl not oil plain 6 12.100
2309 127 4 213 EN 10219 S235JRH bl not oil plain 12 12.100
139135 127 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 15.000
2311 127 5 212 EN 10219 S235JRH bl not oil plain 12 15.000
67951 127 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 18.800
2313 127 6.3 212 EN 10219 S235JRH bl not oil plain 12 18.800
67952 127 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 21.000
139136 127 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 23.500
2316 127 8 212 EN 10219 S235JRH bl not oil plain 12 23.500
67954 127 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 28.900
67955 127 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 35.300
67956 127 14.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 39.500
67957 127 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 43.800
67958 127 17.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 47.300
67959 127 20 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 52.800
130974 127 22.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 57.400
2301 127 25 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 62.900
2303 127 30 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 71.800
2304 127 36 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 80.800
123763 130 10 181 EN 10294-1 E470 bl not oil plain SRL 36.700
123522 130 20 181 EN 10294-1 E470 bl not oil plain SRL 61.700
123594 130 27.5 181 EN 10294-1 E470 bl not oil plain SRL 77.000
109761 133 3 211 EN 10219 S235JRH bl not oil plain 6,40 9.620
2376 133 4 110 EN 10216-1 P235TR2 bl not oil plain DRL 12.700
2379 133 4 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 6 12.700
2380 133 4 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 12.700
108656 133 4 213 EN 10219 S235JRH bl not oil plain 12 12.700
67961 133 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 15.800
139122 133 5 212 EN 10219 S235JRH bl not oil plain 6 15.800
42 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
67962 133 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 19.700
2385 133 6.3 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 19.700
67963 133 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 22.000
67964 133 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 24.700
2388 133 8 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 24.700
67966 133 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 30.300
2360 133 10 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 30.300
132026 133 10 217 EN 10219 S355J2H bl not oil plain 12,50 30.300
67968 133 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 37.100
67969 133 14.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 41.600
67970 133 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 46.200
67971 133 17.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 49.800
2370 133 20 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 55.700
2371 133 25 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 66.600
130976 133 28 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 72.500
2373 133 30 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 76.200
2374 133 36 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 86.100
109762 139.7 3 211 EN 10219 S235JRH bl not oil plain 6,40 10.100
2443 139.7 3.6 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 12.100
2444 139.7 4 110 EN 10216-1 P235TR2 bl not oil plain DRL 13.400
2445 139.7 4 110 EN 10216-1 P235TR2 bl not oil plain SRL 13.400
2447 139.7 4 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 13.400
23315 139.7 4 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 13.400
2448 139.7 4 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 6 13.400
2449 139.7 4 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 13.400
108657 139.7 4 213 EN 10219 S235JRH bl not oil plain 12 13.400
2451 139.7 4 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 13.400
69068 139.7 5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 16.600
2453 139.7 5 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 16.600
69069 139.7 5.6 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 18.500
2456 139.7 5.6 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 18.500
2458 139.7 6.3 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 20.700
67973 139.7 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 20.700
2460 139.7 6.3 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 20.700
67974 139.7 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 23.200
41174 139.7 7.1 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 23.200
67975 139.7 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 26.000
2465 139.7 8 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 26.000
121166 139.7 8 217 EN 10219 S355J2H bl not oil plain 12 26.000
67977 139.7 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 32.000
41177 139.7 10 217 EN 10219 S355J2H bl not oil plain 12 32.000
67978 139.7 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 39.200
67979 139.7 14.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 43.900
67980 139.7 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 48.800
67982 139.7 20 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 59.000
2438 139.7 25 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 70.700
138448 139.7 28 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 77.100
2440 139.7 30 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 81.200
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 43
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
130977 139.7 32 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 85.000
2441 139.7 36 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 92.100
138449 139.7 40 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 98.400
123764 140 20 181 EN 10294-1 E470 bl not oil plain SRL 67.500
123765 140 30 181 EN 10294-1 E470 bl not oil plain SRL 89.600
2693 141.3 6.6 5 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 21.770
2695 141.3 6.6 5 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 21.770
2699 141.3 9.5 5 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 30.970
103298 141.3 10 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 32.400
2690 141.3 12.7 5 S120 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 40.280
117209 141.3 15.9 5 S160 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 49.110
117210 141.3 19.1 5 XXS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 57.430
67984 146 5.6 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 19.400
69070 146 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 24.300
69071 146 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 33.500
67988 146 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 41.200
67990 146 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 51.300
67992 146 20 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 62.100
123766 150 12.5 181 EN 10294-1 E470 bl not oil plain SRL 51.700
123523 150 22.5 181 EN 10294-1 E470 bl not oil plain SRL 80.400
123596 150 32.5 181 EN 10294-1 E470 bl not oil plain SRL 103.800
108861 152.4 3 211 EN 10219 S235JRH bl not oil plain 6,40 11.100
2801 152.4 4 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 6 14.600
2802 152.4 4 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 14.600
2804 152.4 4.5 110 EN 10216-1 P235TR2 bl not oil plain DRL 16.400
2805 152.4 4.5 110 EN 10216-1 P235TR2 bl not oil plain SRL 16.400
2806 152.4 4.5 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 16.400
41182 152.4 5.6 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 20.300
67994 152.4 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 22.700
2808 152.4 6.3 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 22.700
67996 152.4 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 28.500
2812 152.4 8 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 28.500
67998 152.4 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 35.100
68000 152.4 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 43.100
68001 152.4 14.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 48.400
68002 152.4 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 53.800
68003 152.4 17.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 58.200
68004 152.4 20 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 65.300
2797 152.4 25 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 78.500
2799 152.4 30 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 90.600
2800 152.4 36 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 103.000
2803 152.4 40 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 111.000
2846 159 3 211 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 6,40 11.500
109763 159 3 211 EN 10219 S235JRH bl not oil plain 6,40 11.500
2851 159 4 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 6 15.300
2852 159 4 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 15.300
108658 159 4 213 EN 10219 S235JRH bl not oil plain 12 15.300
2855 159 4.5 110 EN 10216-1 P235TR2 bl not oil plain DRL 17.100
44 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
2856 159 4.5 110 EN 10216-1 P235TR2 bl not oil plain SRL 17.100
2858 159 4.5 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 17.100
139123 159 5.6 212 EN 10219 S235JRH bl not oil plain 6 21.200
68007 159 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 23.700
2862 159 6.3 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 23.700
41186 159 7.1 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 26.600
68009 159 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 29.800
2866 159 8 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 29.800
68011 159 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 36.700
68012 159 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 45.200
68013 159 14.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 50.700
68014 159 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 56.400
68015 159 17.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 61.100
68016 159 20 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 68.600
2845 159 25 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 82.600
2848 159 30 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 95.400
2850 159 36 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 109.000
138450 159 40 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 117.000
123524 160 15 181 EN 10294-1 E470 bl not oil plain SRL 63.700
123525 160 25 181 EN 10294-1 E470 bl not oil plain SRL 93.600
123597 160 35 181 EN 10294-1 E470 bl not oil plain SRL 118.400
3085 165.1 4.5 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 17.800
69072 165.1 5.4 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 21.300
69073 165.1 8.8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 33.900
103790 168.3 3.2 211 EN 10219 S235JRH bl not oil plain 6,40 13.030
3167 168.3 4 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 6 16.200
3168 168.3 4 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 16.200
3171 168.3 4.5 110 EN 10216-1 P235TR2 bl not oil plain DRL 18.200
3172 168.3 4.5 110 EN 10216-1 P235TR2 bl not oil plain SRL 18.200
3174 168.3 4.5 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 18.200
23317 168.3 4.5 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 18.200
3176 168.3 4.5 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 18.200
104459 168.3 4.5 213 EN 10219 S235JRH bl not oil plain 12 18.200
3177 168.3 4.5 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 18.180
3178 168.3 4.8 6 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 19.270
142226 168.3 4.8 6 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 19.350
69074 168.3 5.6 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 22.500
3181 168.3 5.6 6 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 22.310
3182 168.3 5.6 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 22.500
3183 168.3 5.6 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 22.500
68024 168.3 6.3 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 25.200
3186 168.3 6.3 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 25.200
3188 168.3 7.1 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 28.200
68025 168.3 7.1 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 28.200
3195 168.3 7.1 6 STD 150 A333 A333/6LT45 bl oiled bevelled DRL 28.260
3199 168.3 7.1 6 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 28.260
3201 168.3 7.1 6 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 28.260
76942 168.3 7.1 6 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 28.260
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 45
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
76943 168.3 7.1 6 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled SRL 28.260
41188 168.3 7.1 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 28.200
3208 168.3 7.1 219 BS 3059 ERW320/P195GH bl not oil plain 6,70 28.200
130173 168.3 7.1 6 STD 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 28.220
142573 168.3 7.1 6 STD 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 28.220
68026 168.3 8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 31.600
3211 168.3 8 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 31.600
121167 168.3 8 217 EN 10219 S355J2H bl not oil plain 12 31.600
68027 168.3 8.8 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 34.600
68028 168.3 10 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 39.000
3116 168.3 10 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 39.000
121168 168.3 10 217 EN 10219 S355J2H bl not oil plain 12 39.000
3124 168.3 11 6 XS 150 A333 A333/6LT45 bl oiled bevelled DRL 42.560
3125 168.3 11 6 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 42.560
73368 168.3 11 6 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 42.560
76944 168.3 11 6 XS 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 42.560
68030 168.3 12.5 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 48.000
41189 168.3 12.5 217 EN 10219 S355J2H bl not oil plain 12 48.000
68031 168.3 14.2 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 54.000
3141 168.3 14.3 6 S120 150 A333 A333/6LT45 bl oiled bevelled DRL 54.200
3143 168.3 14.3 6 S120 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 54.200
68032 168.3 16 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 60.100
3150 168.3 18.3 6 S160 150 A333 A333/6LT45 bl oiled bevelled DRL 67.560
3152 168.3 18.3 6 S160 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 67.560
68034 168.3 20 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 73.100
3158 168.3 21.9 6 XXS 150 A333 A333/6LT45 bl oiled bevelled DRL 79.220
3160 168.3 21.9 6 XXS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 79.220
3163 168.3 25 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 88.300
3164 168.3 30 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 102.000
3166 168.3 36 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 117.000
3170 168.3 40 125 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 127.000
123598 170 15 181 EN 10294-1 E470 bl not oil plain SRL 68.500
123526 170 25 181 EN 10294-1 E470 bl not oil plain SRL 101.200
123527 170 35 181 EN 10294-1 E470 bl not oil plain SRL 128.400
3252 177.8 4.5 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 19.200
3253 177.8 5 110 EN 10216-1 P235TR2 bl not oil plain DRL 21.300
3254 177.8 5 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 21.300
69075 177.8 6.3 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 26.600
3256 177.8 6.3 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 26.600
69077 177.8 8 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 33.500
3259 177.8 8 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 33.500
69078 177.8 8.8 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 36.700
69079 177.8 10 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 41.400
69080 177.8 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 51.000
68035 177.8 14.2 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 57.300
69081 177.8 16 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 63.800
68036 177.8 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 77.800
3248 177.8 25 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 94.200
46 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
3249 177.8 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 109.000
3250 177.8 36 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 126.000
3251 177.8 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 136.000
144284 177.8 45 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 147.000
123767 180 15 181 EN 10294-1 E470 bl not oil plain SRL 72.900
123528 180 27.5 181 EN 10294-1 E470 bl not oil plain SRL 116.000
123768 180 40 181 EN 10294-1 E470 bl not oil plain SRL 150.900
123769 190 15 181 EN 10294-1 E470 bl not oil plain SRL 77.800
123770 190 27.5 181 EN 10294-1 E470 bl not oil plain SRL 123.900
105019 193.7 4 211 EN 10219 S235JRH bl not oil plain 6,40 18.700
41192 193.7 4 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 18.700
3433 193.7 5.6 110 EN 10216-1 P235TR2 bl not oil plain DRL 26.000
3434 193.7 5.6 110 EN 10216-1 P235TR2 bl not oil plain SRL 26.000
3432 193.7 5.6 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 26.000
79652 193.7 5.6 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 6 26.000
108659 193.7 5.6 213 EN 10219 S235JRH bl not oil plain 12 26.000
69082 193.7 6.3 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 29.100
3437 193.7 6.3 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 29.100
41193 193.7 7.1 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 32.700
68038 193.7 8 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 36.600
9148 193.7 8 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 36.600
61612 193.7 8 217 EN 10219 S355J2H bl not oil plain 12 36.600
69084 193.7 8.8 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 40.100
69085 193.7 10 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 45.300
41194 193.7 10 217 EN 10219 S355J2H bl not oil plain 12 45.300
69086 193.7 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 55.900
41195 193.7 12.5 217 EN 10219 S355J2H bl not oil plain 12 55.900
69087 193.7 14.2 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 62.900
69088 193.7 16 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 70.100
69090 193.7 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 85.700
125496 193.7 22.2 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 93.900
3423 193.7 25 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 104.000
3426 193.7 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 121.000
3427 193.7 36 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 140.000
3430 193.7 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 152.000
125497 193.7 55 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 188.000
123772 200 20 181 EN 10294-1 E470 bl not oil plain SRL 105.200
123599 200 30 181 EN 10294-1 E470 bl not oil plain SRL 142.700
123773 200 42.5 181 EN 10294-1 E470 bl not oil plain SRL 182.100
113312 203 6.3 110 EN 10216-1 P235TR2 bl not oil plain DRL 30.600
69091 203 7.1 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 34.300
69092 203 8 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 38.500
69093 203 10 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 47.600
68039 203 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 58.700
69094 203 14.2 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 66.100
69095 203 16 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 73.800
69096 203 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 90.300
4102 203 25 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 110.000
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 47
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
4103 203 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 128.000
138461 203 36 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 148.000
4106 203 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 161.000
4107 203 50 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 189.000
130978 216 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 96.700
4384 219.1 4 211 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 21.200
4385 219.1 4 211 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 6 21.200
105020 219.1 4 211 EN 10219 S235JRH bl not oil plain 6 21.200
4388 219.1 4.5 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 23.800
4389 219.1 4.5 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 6 23.800
108660 219.1 4.5 213 EN 10219 S235JRH bl not oil plain 12 23.800
4392 219.1 5 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 26.400
141417 219.1 5.6 8 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 29.480
4395 219.1 5.9 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 31.000
4396 219.1 6.3 110 EN 10216-1 P235TR2 bl not oil plain DRL 33.100
4397 219.1 6.3 110 EN 10216-1 P235TR2 bl not oil plain SRL 33.100
4398 219.1 6.3 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 33.100
23319 219.1 6.3 113 EN 10216-2 P235GH TC1 bl not oil plain SRL 33.100
4399 219.1 6.3 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 33.100
108661 219.1 6.3 213 EN 10219 S235JRH bl not oil plain 12 33.100
144969 219.1 6.3 217 EN 10219 S355J2H bl not oil plain 12 33.100
4401 219.1 6.4 8 S 20 150 A333 A333/6LT45 bl oiled bevelled DRL 33.310
4403 219.1 6.4 8 S 20 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 33.310
62947 219.1 6.4 8 S 20 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 33.310
137690 219.1 6.4 8 S 20 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 33.570
143362 219.1 6.4 8 S 20 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 33.570
4410 219.1 7 8 S 30 150 A333 A333/6LT45 bl oiled bevelled DRL 36.810
4411 219.1 7 8 S 30 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 36.810
62948 219.1 7 8 S 30 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 36.810
69097 219.1 7.1 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 37.100
41198 219.1 7.1 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 37.100
69098 219.1 8 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 41.600
41200 219.1 8 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 41.600
61614 219.1 8 217 EN 10219 S355J2H bl not oil plain 12 41.600
4424 219.1 8.2 8 STD 150 A333 A333/6LT45 bl oiled bevelled DRL 42.550
4425 219.1 8.2 8 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 42.550
4427 219.1 8.2 8 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 42.550
4426 219.1 8.2 8 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 42.550
130174 219.1 8.2 8 STD 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 42.650
142227 219.1 8.2 8 STD 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 42.650
69099 219.1 8.8 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 45.600
69100 219.1 10 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 51.600
4324 219.1 10 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 51.600
61615 219.1 10 217 EN 10219 S355J2H bl not oil plain 12 51.600
4326 219.1 10.3 8 S 60 150 A333 A333/6LT45 bl oiled bevelled DRL 53.080
4327 219.1 10.3 8 S 60 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 53.080
69101 219.1 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 63.700
4337 219.1 12.5 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 63.700
48 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
61616 219.1 12.5 217 EN 10219 S355J2H bl not oil plain 12 63.700
4342 219.1 12.7 8 XS 150 A333 A333/6LT45 bl oiled bevelled DRL 64.640
4344 219.1 12.7 8 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 64.640
73369 219.1 12.7 8 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 64.640
4345 219.1 12.7 8 XS 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 64.640
134909 219.1 12.7 8 XS 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 64.640
143575 219.1 12.7 8 XS 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 64.640
69102 219.1 14.2 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 71.800
4357 219.1 15.1 8 S100 150 A333 A333/6LT45 bl oiled bevelled DRL 75.920
23279 219.1 15.1 8 S100 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 75.920
69110 219.1 16 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 80.100
119744 219.1 18.3 8 S120 150 A333 A333/6LT45 bl oiled bevelled DRL 90.440
4369 219.1 18.3 8 S120 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 90.440
69112 219.1 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 98.200
119745 219.1 20.6 8 S140 150 A333 A333/6LT45 bl oiled bevelled DRL 100.920
117231 219.1 20.6 8 S140 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 100.920
4375 219.1 23 8 S160 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 111.270
4377 219.1 25 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 120.000
4381 219.1 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 140.000
4383 219.1 36 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 163.000
4386 219.1 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 177.000
4387 219.1 45 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 193.000
4393 219.1 50 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 209.000
123529 220 20 181 EN 10294-1 E470 bl not oil plain SRL 122.733
123774 220 25 181 EN 10294-1 E470 bl not oil plain SRL 145.356
123530 220 30 181 EN 10294-1 E470 bl not oil plain SRL 166.857
123776 220 45 181 EN 10294-1 E470 bl not oil plain SRL 221.795
69113 229 8 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 43.600
68040 229 10 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 54.000
69114 229 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 66.700
69115 229 16 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 84.100
69116 229 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 103.000
17390 229 25 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 126.000
4503 229 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 147.000
4505 229 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 186.000
37538 229 50 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 221.000
123531 230 20 181 EN 10294-1 E470 bl not oil plain SRL 135.739
123600 230 30 181 EN 10294-1 E470 bl not oil plain SRL 182.546
123777 230 47.5 181 EN 10294-1 E470 bl not oil plain SRL 250.060
4809 244.5 6.3 110 EN 10216-1 P235TR2 bl not oil plain DRL 37.000
4810 244.5 6.3 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 37.000
69117 244.5 8 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 46.700
41522 244.5 8 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 46.700
61618 244.5 8 217 EN 10219 S355J2H bl not oil plain 12 46.700
69118 244.5 10 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 57.800
61619 244.5 10 217 EN 10219 S355J2H bl not oil plain 12 57.800
69119 244.5 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 71.500
61620 244.5 12.5 217 EN 10219 S355J2H bl not oil plain 12 71.500
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 49
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
69120 244.5 14.2 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 80.600
69121 244.5 16 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 90.200
69122 244.5 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 111.000
125498 244.5 22.2 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 122.000
4802 244.5 25 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 135.000
4804 244.5 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 159.000
4806 244.5 36 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 185.000
4807 244.5 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 202.000
125499 244.5 60 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 273.000
123778 250 25 181 EN 10294-1 E470 bl not oil plain SRL 174.200
132584 250 30 181 EN 10294-1 E470 bl not oil plain SRL 199.800
123779 250 35 181 EN 10294-1 E470 bl not oil plain SRL 218.850
123601 250 50 181 EN 10294-1 E470 bl not oil plain SRL 281.447
4907 254 6.3 110 EN 10216-1 P235TR2 bl not oil plain DRL 38.500
69123 254 8 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 48.500
4888 254 10 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 60.200
69125 254 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 74.400
68041 254 16 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 93.900
69126 254 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 115.000
4900 254 25 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 141.000
4902 254 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 166.000
4903 254 36 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 194.000
4904 254 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 211.000
17451 254 50 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 252.000
110659 254 60 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 287.000
4993 267 6.3 110 EN 10216-1 P235TR2 bl not oil plain DRL 40.500
69127 267 8 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 51.100
68042 267 10 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 63.400
69128 267 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 78.500
69131 267 17.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 108.000
69132 267 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 122.000
4969 267 25 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 149.000
4974 267 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 175.000
4985 267 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 224.000
4986 267 50 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 268.000
5107 273 4 211 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 26.500
5108 273 4 211 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 6 26.500
104424 273 4 211 EN 10219 S235JRH bl not oil plain 12 26.500
105021 273 4 211 EN 10219 S235JRH bl not oil plain 6 26.500
136093 273 4.8 10 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 31.760
121341 273 5.6 10 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 36.940
139907 273 5.6 10 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 36.940
5116 273 6.3 110 EN 10216-1 P235TR2 bl not oil plain DRL 41.400
5117 273 6.3 110 EN 10216-1 P235TR2 bl not oil plain SRL 41.400
5118 273 6.3 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 41.400
5119 273 6.3 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 41.400
5121 273 6.4 10 S 20 150 A333 A333/6LT45 bl oiled bevelled DRL 41.770
5123 273 6.4 10 S 20 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 41.770
50 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
132057 273 6.4 10 S 20 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 41.770
121342 273 6.4 10 S 20 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 42.090
139908 273 6.4 10 S 20 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 42.090
5126 273 7.8 10 S 30 150 A333 A333/6LT45 bl oiled bevelled DRL 51.030
5127 273 7.8 10 S 30 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 51.030
62950 273 7.8 10 S 30 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 51.030
121343 273 7.8 10 S 30 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 51.030
142228 273 7.8 10 S 30 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 51.030
69133 273 8 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 52.300
41203 273 8 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 52.300
61621 273 8 217 EN 10219 S355J2H bl not oil plain 12 52.300
5140 273 9.3 10 STD 150 A333 A333/6LT45 bl oiled bevelled DRL 60.310
5141 273 9.3 10 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 60.310
5142 273 9.3 10 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 60.310
121344 273 9.3 10 STD 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 60.500
141418 273 9.3 10 STD 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 60.500
69134 273 10 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 64.900
61622 273 10 217 EN 10219 S355J2H bl not oil plain 12 64.900
69135 273 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 80.300
61623 273 12.5 217 EN 10219 S355J2H bl not oil plain 12 80.300
5070 273 12.7 10 XS 150 A333 A333/6LT45 bl oiled bevelled DRL 81.550
5071 273 12.7 10 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 81.550
73371 273 12.7 10 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled SRL 81.550
38842 273 12.7 10 XS 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 81.550
121345 273 12.7 10 XS 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 81.550
68043 273 14.2 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 90.600
5078 273 15.1 10 S 80 150 A333 A333/6LT45 bl oiled bevelled DRL 96.010
5079 273 15.1 10 S 80 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 96.010
68044 273 16 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 101.000
41204 273 16 217 EN 10219 S355J2H bl not oil plain 12 101.000
117232 273 18.3 10 S100 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 114.750
68046 273 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 125.000
119746 273 21.4 10 S120 150 A333 A333/6LT45 bl oiled bevelled DRL 133.060
5095 273 21.4 10 S120 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 133.060
130979 273 22.2 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 137.000
5099 273 25 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 153.000
119747 273 25.4 10 XXS 150 A333 A333/6LT45 bl oiled bevelled DRL 155.150
117271 273 25.4 10 XXS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 155.150
5102 273 28.6 10 S160 150 A333 A333/6LT45 bl oiled bevelled DRL 172.330
73372 273 28.6 10 S160 170 API 5L/ASTM A106 Gr.B bl oiled plain DRL 172.330
5104 273 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 180.000
5106 273 36 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 210.000
5109 273 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 230.000
5113 273 50 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 275.000
69139 279 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 128.000
5153 279 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 184.000
5154 279 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 236.000
69140 292 10 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 69.500
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 51
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
69141 292 16 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 109.000
69142 292 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 134.000
5179 292 25 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 165.000
5180 292 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 194.000
17524 292 36 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 227.000
5183 292 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 249.000
5200 298.5 7.1 110 EN 10216-1 P235TR2 bl not oil plain DRL 51.000
5201 298.5 7.1 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 51.000
69143 298.5 8 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 57.300
69144 298.5 10 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 71.100
69145 298.5 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 88.200
69146 298.5 16 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 111.000
69147 298.5 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 137.000
5194 298.5 25 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 169.000
5195 298.5 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 199.000
5196 298.5 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 255.000
5197 298.5 50 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 306.000
110660 298.5 60 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 353.000
111052 298.5 70 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 394.000
110672 298.5 90 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 463.000
133720 305 7.1 110 EN 10216-1 P235TR2 bl not oil plain SRL 52.200
69148 305 10 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 72.800
69149 305 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 90.200
69150 305 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 141.000
5634 305 25 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 173.000
5635 305 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 204.000
5636 305 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 261.000
125511 305 50 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 314.000
69152 318 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 94.200
110339 318 36 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 250.000
109000 318 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 274.000
125512 318 60 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 382.000
5776 323.9 4 211 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 31.600
78971 323.9 4 211 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 6 31.600
143366 323.9 4.8 12 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 37.770
5782 323.9 5 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 39.300
143365 323.9 5.6 12 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 43.960
5788 323.9 6.3 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 49.300
121348 323.9 6.4 12 S 20 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 50.110
139909 323.9 6.4 12 S 20 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 50.110
5791 323.9 7.1 110 EN 10216-1 P235TR2 bl not oil plain DRL 55.500
5792 323.9 7.1 110 EN 10216-1 P235TR2 bl not oil plain SRL 55.500
5793 323.9 7.1 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 55.500
5795 323.9 7.1 12 150 A333 A333/6LT45 bl oiled bevelled DRL 55.770
5797 323.9 7.1 12 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 55.770
121350 323.9 7.1 12 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 55.470
139910 323.9 7.1 12 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 55.470
69155 323.9 8 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 62.300
52 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
61624 323.9 8 217 EN 10219 S355J2H bl not oil plain 12 62.300
5806 323.9 8.4 12 S 30 150 A333 A333/6LT45 bl oiled bevelled DRL 65.200
5808 323.9 8.4 12 S 30 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 65.200
62952 323.9 8.4 12 S 30 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 65.200
121351 323.9 8.4 12 S 30 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 65.350
5816 323.9 9.5 12 STD 150 A333 A333/6LT45 bl oiled bevelled DRL 73.880
5817 323.9 9.5 12 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 73.880
5818 323.9 9.5 12 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 73.880
121352 323.9 9.5 12 STD 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 73.650
69156 323.9 10 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 77.400
54622 323.9 10 217 EN 10219 S355J2H bl not oil plain 12 77.400
5724 323.9 10.3 12 S 40 150 A333 A333/6LT45 bl oiled bevelled DRL 79.730
5726 323.9 10.3 12 S 40 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 79.730
5727 323.9 10.3 12 S 40 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 79.730
69157 323.9 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 96.000
5732 323.9 12.5 212 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 96.000
61625 323.9 12.5 217 EN 10219 S355J2H bl not oil plain 12 96.000
5734 323.9 12.7 12 XS 150 A333 A333/6LT45 bl oiled bevelled DRL 97.460
5735 323.9 12.7 12 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 97.460
62953 323.9 12.7 12 XS 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 97.460
121353 323.9 12.7 12 XS 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 97.460
69158 323.9 14.2 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 108.000
119748 323.9 14.3 12 S 60 150 A333 A333/6LT45 bl oiled bevelled DRL 108.960
5741 323.9 14.3 12 S 60 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 108.960
68048 323.9 16 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 121.000
41209 323.9 16 217 EN 10219 S355J2H bl not oil plain 12 121.000
115021 323.9 16 217 EN 10219 S355J2H bl not oil plain 8 121.000
125513 323.9 17.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 132.000
5749 323.9 17.5 12 S 80 150 A333 A333/6LT45 bl oiled bevelled DRL 132.080
5750 323.9 17.5 12 S 80 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 132.080
68049 323.9 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 150.000
132674 323.9 20 217 EN 10219 S355J2H bl not oil plain 12 150.000
119749 323.9 21.4 12 S100 150 A333 A333/6LT45 bl oiled bevelled DRL 159.910
5756 323.9 21.4 12 S100 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 159.910
78211 323.9 25 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 184.000
119750 323.9 25.4 12 XXS 150 A333 A333/6LT45 bl oiled bevelled DRL 186.970
5765 323.9 25.4 12 XXS 170 API 5L/ASTM A106 Gr.B bl oiled plain DRL 186.970
119751 323.9 28.6 12 S140 150 A333 A333/6LT45 bl oiled bevelled DRL 208.140
117233 323.9 28.6 12 S140 170 API 5L/ASTM A106 Gr.B bl oiled bevelled 7,15- 208.140
5772 323.9 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 217.000
125515 323.9 32 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 230.000
119752 323.9 33.3 12 S160 150 A333 A333/6LT45 bl oiled bevelled DRL 238.760
117234 323.9 33.3 12 S160 170 API 5L/ASTM A106 Gr.B bl oiled bevelled 6-7,9 238.760
5775 323.9 36 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 256.000
5778 323.9 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 280.000
5779 323.9 45 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 310.000
5784 323.9 50 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 338.000
113733 323.9 60 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 390.000
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 53
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
111053 323.9 70 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 438.000
69160 343 16 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 129.000
125517 343 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 232.000
125518 343 36 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 273.000
39860 343 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 299.000
125519 343 50 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 361.000
110340 343 55 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 391.000
130453 355.6 4.8 14 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 41.520
144042 355.6 4.8 14 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 41.520
41210 355.6 5.6 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 48.300
139941 355.6 6.4 14 S 10 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 55.110
6322 355.6 7.9 14 S 20 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 67.900
121355 355.6 7.9 14 S 20 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 67.740
139942 355.6 7.9 14 S 20 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 67.740
55077 355.6 8 110 EN 10216-1 P235TR2 bl not oil plain RL 68.600
6324 355.6 8 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 68.600
61626 355.6 8 217 EN 10219 S355J2H bl not oil plain 12 68.600
6328 355.6 9.5 14 STD 150 A333 A333/6LT45 bl oiled bevelled DRL 81.330
6329 355.6 9.5 14 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 81.330
38845 355.6 9.5 14 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 81.330
121356 355.6 9.5 14 STD 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 81.080
69162 355.6 10 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 85.200
61627 355.6 10 217 EN 10219 S355J2H bl not oil plain 12 85.200
6274 355.6 11.1 14 S 40 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 94.550
69163 355.6 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 106.000
41214 355.6 12.5 217 EN 10219 S355J2H bl not oil plain 12 106.000
115087 355.6 12.7 14 XS 150 A333 A333/6LT45 bl oiled bevelled DRL 107.390
9168 355.6 12.7 14 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 107.390
6283 355.6 12.7 14 XS 280 API 5L/ASTM A53 GR.B /X42 bl oiled bevelled RL 107.390
69164 355.6 14.2 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 120.000
6285 355.6 15.1 14 S 60 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 126.710
69165 355.6 16 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 134.000
41215 355.6 16 217 EN 10219 S355J2H bl not oil plain 12 134.000
118739 355.6 16 217 EN 10219 S355J2H bl not oil plain 12-18 134.000
69166 355.6 17.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 146.000
6293 355.6 19 14 S 80 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 158.100
69167 355.6 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 166.000
132675 355.6 20 217 EN 10219 S355J2H bl not oil plain 12 166.000
19672 355.6 23.8 14 S100 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 194.960
6299 355.6 25 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 204.000
117235 355.6 27.8 14 S120 170 API 5L/ASTM A106 Gr.B bl oiled bevelled 6,4-8 224.650
6304 355.6 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 241.000
117236 355.6 31.8 14 S140 170 API 5L/ASTM A106 Gr.B bl oiled bevelled 6-7,3 253.560
117237 355.6 35.7 14 S160 170 API 5L/ASTM A106 Gr.B bl oiled bevelled 6-6,5 281.700
6308 355.6 36 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 284.000
6310 355.6 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 311.000
6311 355.6 45 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 345.000
6313 355.6 50 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 377.000
54 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
111054 355.6 60 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 437.000
110673 355.6 70 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 493.000
110674 355.6 90 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 590.000
69168 368 10 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 88.300
69169 368 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 110.000
69170 368 16 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 139.000
68051 368 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 172.000
6356 368 25 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 211.000
6357 368 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 250.000
6362 368 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 324.000
6363 368 45 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 358.000
6364 368 50 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 392.000
110675 368 60 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 456.000
110676 368 70 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 514.000
111055 368 80 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 568.000
69171 394 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 118.000
69172 394 16 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 149.000
69173 394 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 184.000
6459 394 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 269.000
39861 394 36 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 318.000
39862 394 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 349.000
39863 394 45 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 387.000
110341 394 60 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 494.000
141419 406.4 5 16 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 49.500
139943 406.4 6.4 16 S 10 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 63.130
6945 406.4 7.9 16 S 20 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 77.830
6946 406.4 7.9 16 S 20 280 API 5L/ASTM A53 GR.B /X42 bl oiled bevelled RL 77.630
139944 406.4 7.9 16 S 20 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 77.630
61628 406.4 8 217 EN 10219 S355J2H bl not oil plain 12 78.600
6948 406.4 8.7 16 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 85.710
55078 406.4 8.8 110 EN 10216-1 P235TR2 bl not oil plain DRL 86.300
6949 406.4 8.8 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 86.300
41217 406.4 8.8 213 EN 10217-1/10219 P235TR1/S235JRH bl not oil plain 12 86.300
6954 406.4 9.5 16 STD 150 A333 A333/6LT45 bl oiled bevelled DRL 93.270
6955 406.4 9.5 16 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 93.270
79749 406.4 9.5 16 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 93.270
121358 406.4 9.5 16 STD 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 92.980
69174 406.4 10 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 97.800
61629 406.4 10 217 EN 10219 S355J2H bl not oil plain 12 97.800
69175 406.4 12.5 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 121.000
41219 406.4 12.5 217 EN 10219 S355J2H bl not oil plain 12 121.000
6898 406.4 12.7 16 XS 150 A333 A333/6LT45 bl oiled bevelled DRL 123.300
6899 406.4 12.7 16 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 123.300
130455 406.4 12.7 16 XS 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 123.300
143367 406.4 12.7 16 XS 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 123.300
68052 406.4 14.2 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 137.000
69176 406.4 16 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 154.000
41220 406.4 16 217 EN 10219 S355J2H bl not oil plain 12 154.000
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 55
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
6913 406.4 16.7 16 S 60 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 160.120
69177 406.4 20 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 191.000
128621 406.4 20 217 EN 10219 S355J2H bl not oil plain 15,30 191.000
132676 406.4 20 217 EN 10219 S355J2H bl not oil plain 12 191.000
6920 406.4 21.4 16 S 80 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 203.530
6922 406.4 25 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 235.000
73373 406.4 26.2 16 S100 170 API 5L/ASTM A106 Gr.B bl oiled plain DRL 245.560
6930 406.4 30 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 278.000
117238 406.4 31 16 S120 170 API 5L/ASTM A106 Gr.B bl oiled bevelled 6,65- 286.640
6933 406.4 36 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 329.000
117239 406.4 36.5 16 S140 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 333.190
6934 406.4 40 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 361.000
117240 406.4 40.5 16 S160 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 365.350
6936 406.4 45 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 401.000
6938 406.4 50 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 439.000
111056 406.4 60 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 513.000
110702 406.4 70 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 581.000
104714 406.4 80 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 644.000
104715 406.4 90 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 702.000
104716 406.4 100 126 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 756.000
69178 419 12.5 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 125.000
69179 419 16 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 159.000
69180 419 20 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 197.000
6975 419 25 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 243.000
6978 419 30 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 288.000
6981 419 40 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 374.000
6983 419 50 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 455.000
113734 419 60 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 531.000
113108 419 70 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 602.000
69181 445 14.2 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 151.000
104717 445 20 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 210.000
7070 445 25 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 259.000
9178 445 30 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 307.000
104718 445 36 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 363.000
37541 445 40 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 400.000
37542 445 50 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 487.000
104719 445 60 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 570.000
104720 445 70 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 647.000
104721 445 80 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 720.000
104722 445 90 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 788.000
137691 457 5.6 18 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 62.340
137692 457 6.4 18 S 10 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 71.120
141420 457 6.4 18 S 10 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 71.120
7153 457 7.9 18 S 20 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 87.710
136094 457 7.9 18 S 20 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 87.490
7159 457 9.5 18 STD 150 A333 A333/6LT45 bl oiled bevelled DRL 105.160
7161 457 9.5 18 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 105.160
128693 457 9.5 18 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 105.160
56 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
130175 457 9.5 18 STD 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 104.840
142229 457 9.5 18 STD 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 104.840
55079 457 10 110 EN 10216-1 P235TR2 bl not oil plain DRL 110.000
144970 457 10 217 EN 10219 S355J2H bl not oil plain 12 110.000
73374 457 11.1 18 S 30 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 122.380
68054 457 12.5 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 137.000
144971 457 12.5 217 EN 10219 S355J2H bl not oil plain 12 137.000
7122 457 12.7 18 XS 150 A333 A333/6LT45 bl oiled bevelled DRL 139.150
7124 457 12.7 18 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 139.150
131007 457 12.7 18 XS 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 139.150
73375 457 14.3 18 S 40 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 155.800
68055 457 16 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 174.000
144972 457 16 217 EN 10219 S355J2H bl not oil plain 12 174.000
7135 457 19 18 S 60 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 205.740
68057 457 20 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 216.000
21282 457 23.8 18 S 80 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 254.550
7143 457 25 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 266.000
117241 457 29.4 18 S100 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 309.620
7107 457 30 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 316.000
117242 457 34.9 18 S120 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 363.560
7145 457 36 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 374.000
117243 457 39.7 18 S140 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 408.260
7147 457 40 127 EN 10210 S355J2H bl not oil plain RL 411.000
117248 457 45.2 18 S160 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 459.370
7148 457 50 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 502.000
110677 457 60 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 587.000
110678 457 70 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 668.000
104723 457 80 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 744.000
104724 457 90 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 815.000
104725 457 100 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 880.000
109132 470 11 110 EN 10216-1 P235TR2 bl not oil plain DRL 125.000
7165 470 11 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 125.000
69183 470 20 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 222.000
7170 470 25 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 274.000
7173 470 30 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 326.000
125520 470 60 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 607.000
69184 495 16 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 189.000
121359 508 6.4 20 S 10 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 79.160
139945 508 6.4 20 S 10 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 79.160
137693 508 7.9 20 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 97.430
141451 508 7.9 20 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 97.430
7527 508 9.5 20 STD 150 A333 A333/6LT45 bl oiled bevelled DRL 117.150
7529 508 9.5 20 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 117.150
128694 508 9.5 20 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 117.150
139946 508 9.5 20 STD 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 116.780
61630 508 10 217 EN 10219 S355J2H bl not oil plain 12 123.000
7470 508 11 113 EN 10216-2 P235GH TC1 bl not oil plain DRL 135.000
69185 508 12.5 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 153.000
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 57
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
61631 508 12.5 217 EN 10219 S355J2H bl not oil plain 12 153.000
7476 508 12.7 20 XS 150 A333 A333/6LT45 bl oiled bevelled DRL 155.120
7477 508 12.7 20 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 155.120
139947 508 12.7 20 XS 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 155.120
104726 508 14.2 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 173.000
7489 508 15.1 20 S 40 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 183.420
68058 508 16 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 194.000
41233 508 16 217 EN 10219 S355J2H bl not oil plain 12 194.000
68059 508 20 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 241.000
132677 508 20 217 EN 10219 S355J2H bl not oil plain 12 241.000
21299 508 20.6 20 S 60 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 247.830
7500 508 25 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 298.000
73376 508 26.2 20 S 80 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 311.170
7507 508 30 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 354.000
117249 508 32.5 20 S100 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 381.530
104727 508 36 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 419.000
117250 508 38.1 20 S120 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 441.490
7511 508 40 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 462.000
117251 508 44.5 20 S140 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 508.110
7514 508 50 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 565.000
117252 508 50 20 S160 170 API 5L/ASTM A106 Gr.B bl oiled bevelled 8-10 564.810
110679 508 60 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 663.000
104728 508 70 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 756.000
113897 508 80 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain SRL 844.000
104729 508 90 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 928.000
104730 508 100 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 1006.000
7572 521 17.5 120 EN 10216-1 P235TR2 bl not oil plain DRL 217.000
69187 521 17.5 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 217.000
69188 521 20 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 247.000
125522 521 30 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 363.000
125523 521 50 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 581.000
108711 521 60 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 682.000
103673 546 50 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 612.000
119019 546 55 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 666.000
117954 546 60 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 719.000
104731 559 14.2 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 191.000
104732 559 17.5 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 234.000
69189 559 20 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 266.000
7596 559 25 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 329.000
7598 559 30 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 391.000
104733 559 36 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 464.000
7599 559 40 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 512.000
7607 559 50 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 628.000
104734 559 60 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 738.000
104735 559 70 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 844.000
104736 559 80 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 945.000
104737 559 90 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 1041.000
104738 559 100 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 1132.000
58 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
111450 572 45 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 585.000
111451 572 50 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 644.000
111452 572 60 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 758.000
125524 572 70 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 867.000
54623 610 6.4 24 S 10 280 API 5L/ASTM A53 Gr.B bl oiled bevelled 11,80 95.260
125541 610 6.4 24 S 10 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 95.260
139948 610 6.4 24 S 10 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 95.260
54624 610 7.9 24 280 API 5L/ASTM A53 Gr.B bl oiled bevelled 11,80 117.300
125542 610 7.9 24 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 117.300
143800 610 7.9 24 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 117.300
8235 610 9.5 24 STD 150 A333 A333/6LT45 bl oiled bevelled DRL 141.120
8237 610 9.5 24 STD 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 141.120
143194 610 9.5 24 STD 171 API 5L/ASTM A106 GR.B bl oiled bevelled DRL 141.120
54625 610 9.5 24 STD 280 API 5L/ASTM A53 Gr.B bl oiled bevelled 11,80 140.680
125543 610 9.5 24 STD 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 140.680
143811 610 9.5 24 STD 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 140.680
119430 610 12.7 24 XS 150 A333 A333/6LT45 bl oiled bevelled DRL 187.060
8243 610 12.7 24 XS 170 API 5L/ASTM A106 Gr.B bl oiled bevelled 8-14 187.060
54626 610 12.7 24 XS 280 API 5L/ASTM A53 Gr.B bl oiled bevelled 11,80 187.060
125544 610 12.7 24 XS 281 EN10217/EN10219/API 5L P265TR2/S275J0H/GR.B bl not oil bevelled 12 187.060
143812 610 12.7 24 XS 281 EN10217/EN10219/API 5L P235GH/S235JRH/GR.B bl not oil bevelled 11,80 187.060
8223 610 14.3 24 S 30 170 API 5L/ASTM A106 Gr.B bl oiled bevelled 8-14 209.640
69190 610 16 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 234.000
104739 610 17.5 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 256.000
38805 610 17.5 24 S 40 150 A333 A333/6LT45 bl oiled bevelled DRL 255.410
8226 610 17.5 24 S 40 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 255.410
69191 610 20 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 291.000
117253 610 24.6 24 S 60 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 355.260
8250 610 25 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 361.000
73377 610 25.4 24 170 API 5L/ASTM A106 Gr.B bl oiled plain DRL 366.170
46357 610 30 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 429.000
117254 610 31 24 S 80 170 API 5L/ASTM A106 Gr.B bl oiled bevelled DRL 442.080
104740 610 36 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 510.000
117255 610 38.9 24 S100 170 API 5L/ASTM A106 Gr.B bl oiled bevelled 8-10 547.710
8254 610 40 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 562.000
20893 610 45 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 627.000
117256 610 46 24 S120 170 API 5L/ASTM A106 Gr.B bl oiled bevelled 7-9 640.030
8255 610 50 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 691.000
117257 610 52.4 24 S140 170 API 5L/ASTM A106 Gr.B bl oiled bevelled 7-9 720.150
117258 610 59.5 24 S160 170 API 5L/ASTM A106 Gr.B bl oiled bevelled 7-9 808.220
113735 610 60 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 814.000
110680 610 70 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 932.000
110681 610 80 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 1046.000
110682 610 90 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 1154.000
104751 610 100 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 1258.000
107077 622 25 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 368.000
104610 660 20 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 316.000
102841 660 30 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 466.000
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 59
Pipes and Tubes
Explanation of used abbreviations is foundon the last page of this catalogue.
D Outside diameters Wall thickness Seamless - VL code 110 - 181 welded - VL code 211 - 430
Legend
Art.nr D1 mm S1mm
D1inch
Sched VLCode
Standard Steel grade Surface Ends Length in m Kg/m
109001 660 50 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 752.000
103672 660 60 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 888.000
117764 660 70 127 EN 10210/10297-1 S355J2H/E355 bl not oil plain RL 1019.000
8398 711 9.5 28 STD 271 API 5L Gr.B bl not oil bevelled 12 164.340
8396 711 12.7 28 XS 271 API 5L Gr.B bl not oil bevelled 12 218.690
8509 762 9.5 30 STD 271 API 5L Gr.B bl not oil bevelled 12 176.290
8504 762 12.7 30 XS 271 API 5L Gr.B bl not oil bevelled 12 234.670
8876 813 9.5 32 STD 271 API 5L Gr.B bl not oil bevelled 12 188.240
8874 813 12.7 32 XS 271 API 5L Gr.B bl not oil bevelled 12 250.640
9109 914 9.5 36 STD 271 API 5L Gr.B bl not oil bevelled 12 211.900
9105 914 12.7 36 XS 271 API 5L Gr.B bl not oil bevelled 12 282.270
828 1016 9.5 40 STD 271 API 5L Gr.B bl not oil bevelled 12 235.790
795 1016 12.7 40 XS 271 API 5L Gr.B bl not oil bevelled 12 314.220
2275 1219 9.5 48 STD 271 API 5L Gr.B bl not oil bevelled 12 283.350
2274 1219 12.7 48 XS 271 API 5L Gr.B bl not oil bevelled 12 377.790
142538 1422 12.7 56 XS 271 API 5L Gr.B bl not oil bevelled 12 441.370
60 No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube
Appendix A for pipes and tubes
Appendix A
Used abbreviations
6/5 6 m length, bundled per 5
6/10 6 m length, bundled per 10
bl not oil black, not oiled
bl oiled black, oiled
CFS from cold formed strip
cold cold formed
DRL double random length (8-12 m)
el zinc pl electrolytic zinc plated
KTL boiler tube quality
pickled from hot rolled pickled strip
poly outside polyethylene coated
RL random length (5-12 m)
shbl paint shotblasted and painted
SRL single random length (5-7m)
T and C threaded and coupled
Although this publication has been compiled with the greatest care, there is a possibility that certain information expires or is incorrect. Van Leeuwen Buizen is not responsible for the consequences of activities that are initiated on the basis of this publication.
No part of this publication may be multiplied or copied without previous written permission of Van Leeuwen Pipe and Tube 61
www.vanleeuwen.com
Van Leeuwen Buizen
Lindtsedijk 100, 3336 LE Zwijndrecht
Postbus 1, 3330 AA Zwijndrecht
Nederland
Telefoon : +31 (0) 78 625 25 25
Fax : +31 (0) 78 625 20 20
E-mail : [email protected]