pipe shoe catalog
TRANSCRIPT
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 1/26
A A A T E C H N O L O G Y & SPECIALTIES CO., INC.
P R O D U C T C A T A L O G
2012
www.aaatech.com
TOTAL SOLUTION SERVICE
For the Industrial Piping Marketplace
4 1 Y E A R S S E R V I N G I N D U S T
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 2/26
AAA Technology & Speciales Co., Inc.
TABLE OF CONTENTS
Introducon 1
Shoe Types 2
How to Order 3
Slot Opon Detain 4
Slide Bearing Detail 5
Guide Detail 6
Base Plate Detail 7
SHOE TYPES AND SPECIFICATIONS
Fig 5000 - Split Beam T-Shoe 8
Fig 5001 - Split Beam T-Shoe with Gusset 9
Fig 5010 - Split Beam T-Shoe with U-Bolts 10
Fig 5011 - Split Beam T-Shoe with U-Bolts and Gusset 11
Fig 5020 - Split Beam T-Shoe with Clamps 12
Fig 5021 - Split Beam T-Shoe with Clamps and Gusset 13
Fig 5100 - Fabricated T-Shoe 14
Fig 5101 - Fabricated T-Shoe with Gusset 15
Fig 5110 - Fabricated T-Shoe with U-Bolts 16
Fig 5111 - Fabricated T-Shoe with U-Bolts and Gusset 17
Fig 5120 - Fabricated T-Shoe with Clamps 18
Fig 5121 - Fabricated T-Shoe with Clamps and Gusset 19
Fig 5200 - Double Upright T-Shoe 20
Fig 5210 - Double Upright T-Shoe with U-Bolts 21
Fig 5220 - Double Upright T-Shoe with Clamps 22
Fig 5500 - Heavy Duty Pipe Saddle 23
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 3/26
713-849-3366 | www.aaatech.com | [email protected] Page 1
PIPE SHOES
Pipe Support and T– Shoes
AAA Technology & Specialty Co., Inc. is proud to provide a complete line of Pipe Shoes and Supports. These pipe shoes are con-
structed in accordance with the rules and regulaons specied and dened by the Quality Assurance Procedures for Pipe Sup-
ports Manufactured per ASME B31.1, B31.2, B31.3, B31.4, B31.5, B31.8, B31.9 & B31.11 Piping Codes, the ANSI/AWS D1.1 and
the MSS SP-58 & MSS SP-69 Standards. Well trained and experienced personal using formal standardized document systems
and fabricaon control methods supervise all projects.
The Pipe Shoes and Supports oered
herein are built in three categories:
Split Beam Construcon, Welded FlatBar or Double Upright Construcon in
accordance to your requirements. In
addion, we can supply these in vari-
ous Guided Shoe Assemblies as illus-
trated in the pages hereaer.
These shoes can be built with our
TRI*SLIDE™ slide bearings furnished
in PTFE over PTFE, Stainless Steel over
PTFE , Stainless Steel over Graphite,
or any other combinaon that you
require. We are also able to supply
Meehanite & Alloys for high tempera-
ture applicaons, Permali or Compo-
site Supports for cryogenic applica-
ons, and can fabricate these out of
machined block or poured to your
specic needs.
To beer assist you please do not
hesitate to call AAA Technology & Speciales Co., Inc. to tell us about your requirements in order to beer serve you in yourPipe Support soluons.
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 4/26
AAA Technology & Speciales Co., Inc. Page 2
PIPE SHOES
SHOE TYPES
Choose from three designs of pipe shoe: 1) Split Beam T -Shoe; 2) Fabricated (from at bar) T-Shoe; or 3) Double Upright T-Shoe. Each design, in turn, can be fabricated : 1)
Plain; 2) With U-Bolts; or 3) With Clamps.
5000 - Split Beam—Plain 5010 - Split Beam with U-Bolts 5020 - Split Beam with Clamps
5100 - Fabricated-Plain 5110 - Fabricated with U-Bolts 5120 - Fabricated with Clamps
5200 - Double Upright—Plain 5210 - Double Upright with U-Bolts 5220 - Double Upright with Clamps
Fig. 5000, 5010, & 5020 SPLIT BEAM T-SHOES
Fig. 5100, 5110, 5120 FABRICATED T-SHOES
Fig. 5200, 5210, & 5220 DOUBLE UPRIGHT T-SHOES
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 5/26
713-849-3366 | www.aaatech.com | [email protected] Page 3
PIPE SHOES
HOW TO ORDER
T-Shoes are ordered by indicang the following dimensions and choices:
Fig. Descripon of Pipe Shoe
5000 Split Beam T-Shoe
5010 Split Beam T-Shoe w/U-Bolts
5020 Split Beam T-Shoe w/Clamps
5100 Fabricated T-Shoe
5110 Fabricated T-Shoe w/U-Bolts
5120 Fabricated T-Shoe w/Clamps
5200
Double Upright T-Shoe
5210 Double Upright T-Shoe w/U-Bolts
5220 Double Upright T-Shoe w/Clamps
Type Descripon of Guide Support
NG No Guide
CG Clip Guide
AG Angle Guide
AG2 Angle Guide 2
AG&ST Angle Guide and Line Stop
Type Descripon of Slot Opons
S1 No Slots
S2 Expansion Slots
S3 Insulaon Band Slots
S4 Expansion Slots & Insulaon Band Slots
GP Gusset Plates
Type Descripon of Slide Bearings
T/T PTFE on PTFE
S/T Stainless Steel on PTFE
S/P Stainless Steel on Polyethylene
S/G Stainless Steel on Graphite
G/G Graphite on Graphite
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 6/26
AAA Technology & Speciales Co., Inc. Page 4
SLOT OPTION DETAIL
Type S1, No Slots
Type S2, Expansion Slots
Type S3, Insulaon Slots
Type S4, Expansion & Insulaon Slots
Type GP, Gusset Plates
PIPE SHOES
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 7/26
713-849-3366 | www.aaatech.com | [email protected] Page 5
PIPE SHOES
GUIDE DETAIL
Type NG, No Guide
Type CG, Clip Guide
Type AG, Angle Guide
Type AG2, Angle Guide 2
Type AG&ST, Angle Guide & Line Stop
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 8/26
AAA Technology & Speciales Co., Inc. Page 6
PIPE SHOES
SLIDE BEARING OPTION DETAIL
Property T/T - PTFE on PTFE S/T - SS on PTFE S/P - SS on Polyethylene
G/G - Graphite on
Graphite
Compressive
Strength
2000 PSI 4000 PSI 1200 PSI 5625 PSI
Maximum Tem-
perature
300° F (150° C) 300° F (150° C) 200° F (95° C) 800° F (430° C)
Opon T/T, S/T and S/P
Opon G/G
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 9/26
713-849-3366 | www.aaatech.com | [email protected] Page 7
PIPE SHOES
BASE PLATE DETAIL
L (in)
Single Upright Shoes (e.g. Fig Double Upright Shoes (e.g. Fig
Pipe Size Type NG
Type AG
or AG2
Type CG Type NG
Type AG
or AG2
Type CG T (in)
2 6 6 3/4 8 1/4 -- -- --1/4" or 3/8 or 1/2"
2 1/2 6 6 3/4 8 1/4 -- -- --1/4" or 3/8 or 1/2"
3 6 6 3/4 8 1/4 -- -- --1/4" or 3/8 or 1/2"
4 6 6 3/4 8 1/4 -- -- --1/4" or 3/8 or 1/2"
6
6
6 3/4
8 1/4-- -- --
1/4" or 3/8 or 1/2"
8 6 6 3/4 8 1/4 -- -- --1/4" or 3/8 or 1/2"
10 6 6 3/4 8 1/4 8 8 3/4 10 1/4 1/4" or 3/8 or 1/2"
12 10 10 3/4 12 1/4 10 10 3/4 12 1/4 1/4" or 3/8 or 1/2"
14 10 10 3/4 12 1/4 10 10 3/4 12 1/4 1/4" or 3/8 or 1/2"
16 10 10 3/4 12 1/4 12 12 3/4 14 1/4 1/4" or 3/8 or 1/2"
18 10 10 3/4 12 1/4 12 12 3/4 14 1/4 1/4" or 3/8 or 1/2"
20 12 12 3/4 14 1/4 14 14 3/4 16 1/4 1/4" or 3/8 or 1/2"
24 12 12 3/4 14 1/4 14 14 3/4 16 1/4 1/4" or 3/8 or 1/2"
30 -- -- -- 19 1/2 20 1/4 21 3/4 1/4" or 3/8 or 1/2"
36 -- -- -- 22 1/2 23 1/4 24 3/4 1/4" or 3/8 or 1/2"
42
-- -- --25 1/2
26 1/4
27 3/4
1/4" or 3/8 or 1/2"
Type NG Base Plate
Type AG or AG2 Base Plate
Type CG Base Plate
Dierent lengths, widths and thicknesses available upon request.
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 10/26
PIPE SHOES
Nominal
Pipe Dia.
(in)
Actual
O.D. (in.) A (in)
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
2 2.375 4 4 5 3/16 5000 6.50 6 7 3/16 5000 8.00
2 1/2 2.875 4 4 5 7/16 5000 6.50 6 7 3/16 5000 8.00
3 3.5 4 4 5 3/4 5000 6.50 6 7 3/4 5000 8.00
3 1/2 4 4 4 6 5000 6.50 6 8 5000 8.00
4 4.5 4 4 6 1/4 5000 6.50 6 8 1/4 5000 8.00
5
5.5625
4
4
6 25/32
6000
6.50
6
8 25/32
6000
8.00
6 6.625 4 4 7 5/16 6000 6.50 6 9 5/16 6000 8.00
8 8.625 4 4 8 5/16 6000 6.50 6 10 5/16 6000 8.00
10 10.75 4 4 9 3/8 8000 6.50 6 11 3/8 8000 8.00
12 12.75 6.5 4 10 3/8 8000 12.00 6 12 3/8 8000 13.00
14 14 6.5 4 11 8000 12.00 6 13 8000 13.00
16 16 6.5 4 12 8000 12.00 6 14 8000 13.00
18 18 6.5 4 13 8000 12.00 6 15 8000 13.00
20 20 8 4 14 8000 15.50 6 16 8000 20.00
24 24 8 4 16 8000 15.50 6 18 8000 20.00
(All slot opons are available with each pipe shoe)
APPLICATION: The Fig 5000 Pipe Shoe is to be welded to the pipe along the top edge and can also be welded to the base.
CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-36 steel. FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See beginning of this section for ordering instructions.
EXAMPLE: 3” - Fig.5000 - 4”x12” - S1 - T/T - AG
FIG. 5000
* - Weights shown are for 12” long shoes
* - For pipe shoes larger than 24” NPS, contact AAAT for further assistance.
713-849-3366 | www.aaatech.com | [email protected] Page 8
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 11/26
PIPE SHOES
FIG. 5001
* - Weights shown are for 12” long shoes
APPLICATION: The Fig 5001 Pipe Shoe with End Gusset Plates is to be welded to the pipe along the top edges of the shoe and the gussets and can also be
welded to the base.
CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-36 steel with End Gussets of Plate. FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See beginning of this section for ordering instructions.
EXAMPLE: 3” - Fig.5001 - 4”x12” - S1 - T/T - AG
Nominal
Pipe Dia.
(in)
Actual
O.D. (in.) A (in)
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
2 2.375 4 4 5 3/16 6500 8.73 6 7 3/16 6500 11.22
2 1/2 2.875 4 4 5 7/16 6500 8.73 6 7 3/16 6500 11.22
3 3.5 4 4 5 3/4 6500 8.73 6 7 3/4 6500 11.22
3 1/2 4 4 4 6 6500 8.73 6 8 6500 11.22
4 4.5 4 4 6 1/4 6500 8.73 6 8 1/4 6500 11.22
5 5.5625 4 4 6 25/32 7800 8.73 6 8 25/32 7800 11.22
6 6.625 4 4 7 5/16 7800 8.73 6 9 5/16 7800 11.22
8 8.625 4 4 8 5/16 7800 8.73 6 10 5/16 7800 11.22
10 10.75 4 4 9 3/8 10400 8.73 6 11 3/8 10400 11.22
12 12.75 6.5 4 10 3/8 10400 16.78 6 12 3/8 10400 19.90
14 14 6.5 4 11 10400 16.78 6 13 10400 19.90
16 16 6.5 4 12 10400 16.78 6 14 10400 19.90
18 18 6.5 4 13 10400 16.78 6 15 10400 19.90
20 20 8 4 14 10400 21.23 6 16 10400 28.28
24 24 8 4 16 10400 21.23 6 18 10400 28.28
* - For pipe shoes larger than 24” NPS, contact AAAT for further assistance.
(All slot opons are available with each pipe shoe)
AAA Technology & Speciales Co., Inc. Page 9
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 12/26
Nominal
Pipe Dia.
(in)
Actual
O.D. (in.) A (in) D (in)
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit
Wt.
(lbs.)*
2 2.375 4 3 7/8" 4 5 3/16 5000 7.94 6 7 3/16 5000 9.44
2 1/2 2.875 4 4 3/16" 4 5 7/16 5000 8.30 6 7 3/16 5000 9.80
3 3.5 4 4 5/8" 4 5 3/4 5000 8.66 6 7 3/4 5000 10.16
3 1/2 4 4 4 7/8" 4 6 5000 9.39 6 8 5000 10.88
4 4.5 4 5 7/16" 4 6 1/4 5000 10.10 6 8 1/4 5000 11.60
5 5.5625 4 6 1/8" 4 6 25/32 6000 10.46 6 8 25/32 6000 11.96
6 6.625 4 7 3/8" 4 7 5/16 6000 14.78 6 9 5/16 6000 16.28
8 8.625 4 8 1/4" 4 8 5/16 6000 16.10 6 10 5/16 6000 17.60
10 10.75 4 10 1/4" 4 9 3/8 8000 25.70 6 11 3/8 8000 27.20
12 12.75 6.5 11 5/8" 4 10 3/8 8000 33.30 6 12 3/8 8000 34.30
14 14 6.5 12 1/2" 4 11 8000 39.90 6 13 8000 40.90
16 16 6.5 13 3/4" 4 12 8000 42.60 6 14 8000 43.60
18 18 6.5 15 1/4" 4 13 8000 55.20 6 15 8000 56.20
20 20 8 16 3/4" 4 14 8000 64.70 6 16 8000 69.20
24 24 8 19 1/4" 4 16 8000 85.10 6 18 8000 89.60
PIPE SHOES
APPLICATION: The Fig. 5010 Pipe Shoe is to be clamped to the pipe along the top edge and can also be welded to the base.
CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-36 steel. FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See beginning of this section for ordering instructions.
EXAMPLE: 3” - Fig.5010 - 4”x12” - S1 - T/T - AG
FIG. 5010
* - Weights shown are for 12” long shoes
* - For pipe shoes larger than 24” NPS, contact AAAT for further assistance.
(All slot opons are available with each pipe shoe)
713-849-3366 | www.aaatech.com | [email protected] Page 10
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 13/26
PIPE SHOES
Nominal
Pipe Dia.
(in)
Actual
O.D. (in.) A (in) D (in)
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit
Wt.
(lbs.)*
2 2.375 4 3 7/8" 4 5 3/16 6500 11.13 6 7 3/16 6500 12.66
2 1/2 2.875 4 4 3/16" 4 5 7/16 6500 11.63 6 7 3/16 6500 13.02
3 3.5 4 4 5/8" 4 5 3/4 6500 12.33 6 7 3/4 6500 13.38
3 1/2 4 4 4 7/8" 4 6 6500 13.53 6 8 6500 14.10
4 4.5 4 5 7/16" 4 6 1/4 6500 14.73 6 8 1/4 6500 14.82
5 5.5625 4 6 1/8" 4 6 25/32 7800 15.33 6 8 25/32 7800 15.18
6 6.625 4 7 3/8" 4 7 5/16 7800 22.53 6 9 5/16 7800 19.50
8 8.625 4 8 1/4" 4 8 5/16 7800 24.73 6 10 5/16 7800 20.82
10 10.75 4 10 1/4" 4 9 3/8 10400 40.73 6 11 3/8 10400 30.42
12 12.75 6.5 11 5/8" 4 10 3/8 10400 52.28 6 12 3/8 10400 41.20
14 14 6.5 12 1/2" 4 11 10400 63.28 6 13 10400 47.80
16 16 6.5 13 3/4" 4 12 10400 67.78 6 14 10400 50.50
18 18 6.5 15 1/4" 4 13 10400 88.78 6 15 10400 63.10
20 20 8 16 3/4" 4 14 10400 103.23 6 16 10400 77.48
24 24 8 19 1/4" 4 16 10400 137.23 6 18 10400 97.88
APPLICATION: The Fig. 5011 Pipe Shoe with End Gusset Plates is to be clamped to the pipe along the top edges and can also be welded to the base.
CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-36 steel. FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See beginning of this section for ordering instructions.
EXAMPLE: 3” - Fig.5011 - 4”x12” - S1 - T/T - AG
FIG. 5011
* - Weights shown are for 12” long shoes
* - For pipe shoes larger than 24” NPS, contact AAAT for further assistance.
(All slot opons are available with each pipe shoe)
AAA Technology & Speciales Co., Inc. Page 11
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 14/26
PIPE SHOES
FIG. 5020
* - Weights shown are for 12” long shoes
Nominal
Pipe Dia.
(in)
Actual
O.D. (in.) A (in) D (in)
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit
Wt.
(lbs.)*
2 2.375 4 3 7/8" 4 5 3/16 5000 8.90 6 7 3/16 5000 10.40
2 1/2 2.875 4 4 3/16" 4 5 7/16 5000 9.50 6 7 3/16 5000 11.00
3 3.5 4 4 5/8" 4 5 3/4 5000 10.10 6 7 3/4 5000 11.60
3 1/2 4 4 4 7/8" 4 6 5000 11.30 6 8 5000 12.80
4 4.5 4 5 7/16" 4 6 1/4 5000 12.50 6 8 1/4 5000 14.00
5 5.5625 4 6 1/8" 4 6 25/32 6000 13.10 6 8 25/32 6000 14.60
6 6.625 4 7 3/8" 4 7 5/16 6000 20.30 6 9 5/16 6000 21.80
8 8.625 4 8 1/4" 4 8 5/16 6000 22.50 6 10 5/16 6000 24.00
10 10.75 4 10 1/4" 4 9 3/8 8000 38.50 6 11 3/8 8000 40.00
12 12.75 6.5 11 5/8" 4 10 3/8 8000 47.50 6 12 3/8 8000 48.50
14 14 6.5 12 1/2" 4 11 8000 58.50 6 13 8000 59.50
16 16 6.5 13 3/4" 4 12 8000 63.00 6 14 8000 64.00
18 18 6.5 15 1/4" 4 13 8000 84.00 6 15 8000 85.00
20 20 8 16 3/4" 4 14 8000 97.50 6 16 8000 102.00
24 24 8 19 1/4" 4 16 8000 131.50 6 18 8000 136.00
APPLICATION: The Fig. 5020 Pipe Shoe is to be clamped to the pipe along the top edge and can also be welded to the base.
CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-36 steel. FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See beginning of this section for ordering instructions.
EXAMPLE: 3” - Fig.5020 - 4”x12” - S1 - T/T - AG
* - For pipe shoes larger than 24” NPS, contact AAAT for further assistance.
(All slot opons are available with each pipe shoe)
713-849-3366 | www.aaatech.com | [email protected] Page 12
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 15/26
PIPE SHOES
FIG. 5021
* - Weights shown are for 12” long shoes
Nominal
Pipe Dia.
(in)
Actual
O.D.
(in.)
A (in) D (in) BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit
Wt.
(lbs.)*
2 2.375 4 3 7/8" 4 5 3/16 6500 11.13 6 7 3/16 6500 13.62
2 1/2 2.875 4 4 3/16" 4 5 7/16 6500 11.93 6 7 3/16 6500 14.22
3 3.5 4 4 5/8" 4 5 3/4 6500 12.33 6 7 3/4 6500 14.82
3 1/2 4 4 4 7/8" 4 6 6500 13.53 6 8 6500 16.02
4 4.5 4 5 7/16" 4 6 1/4 6500 14.73 6 8 1/4 6500 17.22
5 5.5625 4 6 1/8" 4 6 25/32 7800 15.33 6 8 25/32 7800 17.82
6 6.625 4 7 3/8" 4 7 5/16 7800 22.53 6 9 5/16 7800 25.02
8 8.625 4 8 1/4" 4 8 5/16 7800 24.73 6 10 5/16 7800 27.22
10 10.75 4 10 1/4" 4 9 3/8 10400 40.73 6 11 3/8 10400 43.22
12 12.75 6.5 11 5/8" 4 10 3/8 10400 52.28 6 12 3/8 10400 55.40
14 14 6.5 12 1/2" 4 11 10400 63.28 6 13 10400 66.40
16 16 6.5 13 3/4" 4 12 10400 67.78 6 14 10400 70.90
18 18 6.5 15 1/4" 4 13 10400 88.78 6 15 10400 91.90
20 20 8 16 3/4" 4 14 10400 103.23 6 16 10400 110.28
24 24 8 19 1/4" 4 16 10400 137.23 6 18 10400
APPLICATION: The Fig. 5021 Pipe Shoe with End Gusset Plates is to be clamped to the pipe along the top edges and can also be welded to the base.
CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-36 steel. FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See beginning of this section for ordering instructions. EXAMPLE: 3” - Fig.5020 - 4”x12” - S1 - T/T - AG
* - For pipe shoes larger than 24” NPS, contact AAAT for further assistance.
(All slot opons are available with each pipe shoe)
AAA Technology & Speciales Co., Inc. Page 13
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 16/26
PIPE SHOES
FIG. 5100
* - Weights shown are for 12” long shoes
APPLICATION: The Fig. 5100 Pipe Shoe is to be welded to the pipe along the top edge and can also be welded to the base.
CONSTRUCTION: The Pipe Shoe is constructed from two pieces of A-36 steel flat bar welded together. FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See Page 2 for ordering instructions.
EXAMPLE: 3” - Fig.5100 - 4”x12” - S1 - T/T - AG
Nominal
Pipe Dia.
(in)
Actual
O.D. (in.) A (in)
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
2 2.375 4 4 5 3/16 5000 6.58 6 7 3/16 5000 8.28
2 1/2 2.875 4 4 5 7/16 5000 6.58 6 7 3/16 5000 8.28
3 3.5 4 4 5 3/4 5000 6.58 6 7 3/4 5000 8.28
3 1/2 4 4 4 6 5000 6.58 6 8 5000 8.28
4 4.5 4 4 6 1/4 5000 6.58 6 8 1/4 5000 8.28
5 5.5625 4 4 6 25/32 6000 6.58 6 8 25/32 5000 8.28
6 6.625 4 4 7 5/16 6000 6.58 6 9 5/16 6000 8.28
8 8.625 4 4 8 5/16 6000 6.58 6 10 5/16 6000 8.28
10 10.75 4 4 9 3/8 8000 6.58 6 11 3/8 8000 8.28
12 12.75 8 4 10 3/8 8000 9.87 6 12 3/8 8000 12.26
14 14 8 4 11 8000 9.87 6 13 8000 12.26
16 16 8 4 12 8000 9.87 6 14 8000 12.26
18 18 8 4 13 8000 9.87 6 15 8000 12.26
20 20 10 4 14 8000 9.87 6 16 8000 12.26
24 24 10 4 16 8000 9.87 6 18 8000 12.26
* - For pipe shoes larger than 24” NPS, contact AAAT for further assistance.
(All slot opons are available with each pipe shoe)
713-849-3366 | www.aaatech.com | [email protected] Page 14
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 17/26
PIPE SHOES
FIG. 5101
* - Weights shown are for 12” long shoes
Nominal
Pipe Dia.
(in)
Actual
O.D. (in.) A (in)
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt
(lbs.)*
2 2.375 4 4 5 3/16 6500 8.81 6 7 3/16 6500 11.50
2 1/2 2.875 4 4 5 7/16 6500 8.81 6 7 3/16 6500 11.50
3 3.5 4 4 5 3/4 6500 8.81 6 7 3/4 6500 11.50
3 1/2 4 4 4 6 6500 8.81 6 8 6500 11.50
4 4.5 4 4 6 1/4 6500 8.81 6 8 1/4 6500 11.50
5 5.5625 4 4 6 25/32 7800 8.81 6 8 25/32 7800 11.50
6 6.625 4 4 7 5/16 7800 8.81 6 9 5/16 7800 11.50
8 8.625 4 4 8 5/16 7800 8.81 6 10 5/16 7800 11.50
10 10.75 4 4 9 3/8 10400 8.81 6 11 3/8 10400 11.50
12 12.75 8 4 10 3/8 10400 14.65 6 12 3/8 10400 17.09
14 14 8 4 11 10400 14.65 6 13 10400 17.09
16 16 8 4 12 10400 14.65 6 14 10400 17.09
18 18 8 4 13 10400 14.65 6 15 10400 17.09
20 20 10 4 14 10400 15.60 6 16 10400 17.09
24 24 10 4 16 10400 15.60 6 18 10400 17.09
APPLICATION: The Fig. 5101 Pipe Shoe with End Gusset Plates is to be welded to the pipe along the top edges and can also be welded to the base.
CONSTRUCTION: The Pipe Shoe is constructed from two pieces of A-36 steel flat bar welded together. FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See beginning of this section for ordering instructions.
EXAMPLE: 3” - Fig.5101 - 4”x12” - S1 - T/T - AG
* - For pipe shoes larger than 24” NPS, contact AAAT for further assistance.
(All slot opons are available with each pipe shoe)
AAA Technology & Speciales Co., Inc. Page 15
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 18/26
PIPE SHOES
FIG. 5110
* - Weights shown are for 12” long shoes
Nominal
Pipe Dia.
(in)
Actual
O.D. (in.) A (in) D (in)
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
2 2.375 4 3 7/8" 4 5 3/16 5000 8.02 6 7 3/16 5000 9.72
2 1/2 2.875 4 4 3/16" 4 5 7/16 5000 8.29 6 7 3/16 5000 10.08
3 3.5 4 4 5/8" 4 5 3/4 5000 8.74 6 7 3/4 5000 10.44
3 1/2 4 4 4 7/8" 4 6 5000 9.46 6 8 5000 11.16
4
4.5
4
5 7/16"
4
6 1/4 5000
10.18
6
8 1/4 5000
11.88 5 5.5625 4 6 1/8" 4 6 25/32 5000 10.54 6 8 25/32 5000 12.24
6 6.625 4 7 3/8" 4 7 5/16 6000 14.86 6 9 5/16 6000 16.56
8 8.625 4 8 1/4" 4 8 5/16 6000 16.18 6 10 5/16 6000 17.88
10 10.75 4 10 1/4" 4 9 3/8 6000 25.78 6 11 3/8 6000 27.48
12 12.75 8 11 5/8" 4 10 3/8 8000 31.17 6 12 3/8 8000 33.56
14 14 8 12 1/2" 4 11 8000 37.77 6 13 8000 40.16
16 16 8 13 3/4" 4 12 8000 40.47 6 14 8000 42.86
18 18 8 15 1/4" 4 13 8000 53.07 6 15 8000 55.46
20 20 10 16 3/4" 4 14 8000 59.07 6 16 8000 61.46
24 24 10 19 1/4" 4 16 8000 79.47 6 18 8000 81.86
APPLICATION: The Fig. 5110 Pipe Shoe is to be clamped to the pipe along the top edge and can also be welded to the base.
CONSTRUCTION: The Pipe Shoe is constructed from two pieces of A-36 steel flat bar welded together. FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See Page 2 for ordering instructions.
EXAMPLE: 3” - Fig. 5110 - 4”x12” - S1 - T/T - AG
* - For pipe shoes larger than 24” NPS, contact AAAT for further assistance.
(All slot opons are available with each pipe shoe)
713-849-3366 | www.aaatech.com | [email protected] Page 16
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 19/26
PIPE SHOES
FIG. 5111
* - Weights shown are for 12” long shoes
APPLICATION: The Fig. 5111 Pipe Shoe with End Gusset Plates is to be clamped to the pipe along the top edges and can also be welded to the base.
CONSTRUCTION: The Pipe Shoe is constructed from two pieces of A-36 steel flat bar welded together. FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See Page 2 for ordering instructions.
EXAMPLE: 3” - Fig. 5110 - 4”x12” - S1 - T/T - AG
Nominal
Pipe Dia.
(in)
Actual
O.D.
(in.)
A (in) D (in) BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
2 2.375 4 3 7/8" 4 5 3/16 6500 10.25 6 7 3/16 6500 12.94
2 1/2 2.875 4 4 3/16" 4 5 7/16 6500 10.61 6 7 3/16 6500 13.30
3 3.5 4 4 5/8" 4 5 3/4 6500 10.97 6 7 3/4 6500 13.66
3 1/2 4 4 4 7/8" 4 6 6500 11.69 6 8 6500 14.38
4
4.5
4
5 7/16"
4
6 1/4 6500
12.41
6
8 1/4 6500
15.10
5 5.5625 4 6 1/8" 4 6 25/32 7800 12.77 6 8 25/32 7800 15.46
6 6.625 4 7 3/8" 4 7 5/16 7800 17.09 6 9 5/16 7800 19.78
8 8.625 4 8 1/4" 4 8 5/16 7800 18.41 6 10 5/16 7800 21.10
10 10.75 4 10 1/4" 4 9 3/8 10400 28.01 6 11 3/8 10400 30.70
12 12.75 8 11 5/8" 4 10 3/8 10400 35.95 6 12 3/8 10400 38.39
14 14 8 12 1/2" 4 11 10400 42.55 6 13 10400 44.99
16 16 8 13 3/4" 4 12 10400 45.25 6 14 10400 47.69
18 18 8 15 1/4" 4 13 10400 57.85 6 15 10400 60.29
20 20 10 16 3/4" 4 14 10400 64.80 6 16 10400 66.29
24 24 10 19 1/4" 4 16 10400 85.20 6 18 10400 86.69
* - For pipe shoes larger than 24” NPS, contact AAAT for further assistance.
(All slot opons are available with each pipe shoe)
AAA Technology & Speciales Co., Inc. Page 17
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 20/26
PIPE SHOES
FIG. 5120
* - Weights shown are for 12” long shoes
APPLICATION: The Fig. 5120 Pipe Shoe is to be clamped to the pipe along the top edge and can also be welded to the base.
CONSTRUCTION: The Pipe Shoe is constructed from two pieces of A-36 steel flat bar welded together. FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See Page 2 for ordering instructions.
EXAMPLE: 3” - Fig. 5120 - 4”x12” - S1 - T/T - AG
Nominal
Pipe Dia.
(in)
Actual
O.D. (in.) A (in) D (in)
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
2 2.375 4 3 7/8" 4 5 3/16 5000 8.98 6 7 3/16 5000 10.68
2 1/2 2.875 4 4 3/16" 4 5 7/16 5000 9.58 6 7 3/16 5000 11.28
3 3.5 4 4 5/8" 4 5 3/4 5000 10.18 6 7 3/4 5000 11.88
3 1/2 4 4 4 7/8" 4 6 5000 11.38 6 8 5000 13.08
4
4.5
4
5 7/16"
4
6 1/4 5000
12.58
6
8 1/4 5000
14.28
5 5.5625 4 6 1/8" 4 6 25/32 6000 13.18 6 8 25/32 6000 14.88
6 6.625 4 7 3/8" 4 7 5/16 6000 20.38 6 9 5/16 6000 22.08
8 8.625 4 8 1/4" 4 8 5/16 6000 22.58 6 10 5/16 6000 24.28
10 10.75 4 10 1/4" 4 9 3/8 8000 38.58 6 11 3/8 8000 40.28
12 12.75 8 11 5/8" 4 10 3/8 8000 45.37 6 12 3/8 8000 47.76
14 14 8 12 1/2" 4 11 8000 56.37 6 13 8000 58.76
16 16 8 13 3/4" 4 12 8000 60.87 6 14 8000 63.26
18 18 8 15 1/4" 4 13 8000 81.87 6 15 8000 84.26
20 20 10 16 3/4" 4 14 8000 91.87 6 16 8000 94.26
24 24 10 19 1/4" 4 16 8000 125.87 6 18 8000 128.26
* - For pipe shoes larger than 24” NPS, contact AAAT for further assistance.
(All slot opons are available with each pipe shoe)
713-849-3366 | www.aaatech.com | [email protected] Page 18
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 21/26
PIPE SHOES
FIG. 5121
* - Weights shown are for 12” long shoes
Nominal
Pipe Dia.
(in)
Actual
O.D.
(in.)
A (in) D (in) BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
2 2.375 4 3 7/8" 4 5 3/16 6500 11.21 6 7 3/16 12000 13.90
2 1/2 2.875 4 4 3/16" 4 5 7/16 6500 11.81 6 7 3/16 14000 14.50
3 3.5 4 4 5/8" 4 5 3/4 6500 12.41 6 7 3/4 15000 15.10
3 1/2 4 4 4 7/8" 4 6 6500 13.61 6 8 15000 16.30
4
4.5
4
5 7/16"
4
6 1/4 6500
14.81
6
8 1/4 18000
17.50
5 5.5625 4 6 1/8" 4 6 25/32 7800 15.41 6 8 25/32 18000 18.10
6 6.625 4 7 3/8" 4 7 5/16 7800 22.61 6 9 5/16 18000 25.30
8 8.625 4 8 1/4" 4 8 5/16 7800 24.81 6 10 5/16 24000 27.50
10 10.75 4 10 1/4" 4 9 3/8 10400 40.81 6 11 3/8 29000 43.50
12 12.75 8 11 5/8" 4 10 3/8 10400 50.15 6 12 3/8 30000 52.59
14 14 8 12 1/2" 4 11 10400 61.15 6 13 34000 63.59
16 16 8 13 3/4" 4 12 10400 65.65 6 14 38000 68.09
18 18 8 15 1/4" 4 13 10400 86.65 6 15 41000 89.09
20 20 10 16 3/4" 4 14 10400 97.60 6 16 41000 99.09
24 24 10 19 1/4" 4 16 10400 131.60 6 18 47000 133.09
APPLICATION: The Fig. 5121 Pipe Shoe with End Gusset Plates is to be clamped to the pipe along the top edges and can also be welded to the base.
CONSTRUCTION: The Pipe Shoe is constructed from two pieces of A-36 steel flat bar welded together. FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See Page 2 for ordering instructions.
EXAMPLE: 3” - Fig. 5120 - 4”x12” - S1 - T/T - AG
* - For pipe shoes larger than 24” NPS, contact AAAT for further assistance.
(All slot opons are available with each pipe shoe)
AAA Technology & Speciales Co., Inc. Page 19
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 22/26
AAA Technology & Specialties Co., Inc. Page 20
PIPE SHOES
(All possible slot options pictured for information purposes only)
FIG. 5200 DOUBLE UPRIGHT PIPE SHOE
* - Weights shown are for 12” long shoes
Nominal
Pipe Dia.
(in)
Actual
O.D. (in.) A (in)
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
10 10.75 6 4 9 3/8 19000 11.89 6 11 3/8 19000 15.27
12 12.75 8 4 10 3/8 19000 20.38 6 12 3/8 19000 23.76
14 14 8 4 11 19000 20.38 6 13 19000 23.76
16 16 10 4 12 26000 23.78 6 14 26000 27.16
18 18 10 4 13 26000 23.78 6 15 26000 27.16
20 20 12 4 14 26000 30.56 6 16 26000 35.66
24 24 12 4 16 35000 30.56 6 18 35000 35.66
30 30 17 1/2 4 19 38000 43.36 6 15 38000 50.16
36 36 20 1/2 4 22 41000 48.46 6 16 41000 55.26
42 42 23 1/2 4 25 44000 53.57 6 18 44000 60.37
APPLICATION: The Fig. 5200 Shoe is to be welded to the pipe along the two top edges and can also be welded to
the base.
CONSTRUCTION: The Pipe Shoe is constructed of two braced vertical flat bars welded on a support flat bar of A -
36 steel.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different
lengths.
ORDERING: See Page 2 for ordering instructions.
EXAMPLE: 3” - Fig. 5200 - 4”x12” - S1/GP - T/T - AG
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 23/26
713-849-3366 | www.aaatech.com | [email protected] Page 21
PIPE SHOES
(All possible slot opons pictured for informaon purposes only)
FIG. 5210
DOUBLE UPRIGHT PIPE SHOE w/U-BOLTS
* - Weights shown are for 12” long shoes
Nominal
Pipe Dia.
Actual
O.D. (in.) A (in) D (in)
BOP to
TOS (in) H (in)
Load
Capacity
Unit Wt.
(lbs.)*
BOP to
TOS (in) H (in)
Load Ca-
pacity
Unit Wt.
(lbs.)*
10 10.75 6 14 4 9 3/8 19000 19.77 6 11 3/8 19000 23.15
12 12.75 8 16.75 4 10 3/8 19000 33.18 6 12 3/8 19000 36.56
14 14 8 18 4 11 19000 36.98 6 13 19000 40.36
16 16 10 19.75 4 12 26000 42.18 6 14 26000 45.56
18
18
10
22
4
13 26000
50.78
6
15 26000
54.16
20 20 12 24 4 14 26000 59.76 6 16 26000 64.86
24 24 12 28 4 16 35000 64.36 6 18 35000 69.46
30 30 17 1/2 34 4 19 38000 88.96 6 15 38000 95.76
36 36 20 1/2 40 4 22 41000 112.46 6 16 41000 119.26
42 42 23 1/2 46 4 25 44000 129.57 6 18 44000 136.37
APPLICATION: The Fig. 5210 Shoe is to be clamped to the pipe along the top edge and can also be welded to the base.
CONSTRUCTION: The Pipe Shoe is constructed of two braced vertical flat bars welded on a support flat bar of A-36 steel.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See Page 2 for ordering instructions.
EXAMPLE: 3” - Fig. 5210 - 4”x12” - S1/GP - T/T - AG
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 24/26
AAA Technology & Speciales Co., Inc. Page 22
PIPE SHOES
(All possible slot opons pictured for informaon purposes only)
FIG. 5220
DOUBLE UPRIGHT PIPE SHOE w/CLAMPS
* - Weights shown are for 12” long shoes
Nominal
Pipe Dia.
(in)
Actual
O.D. (in.) A (in) D (in)
BOP to
TOS (in) H (in)
Load
Capacity
(lbs.)
Unit Wt.
(lbs.)*
BOP to
TOS (in) H (in)
Load Ca-
pacity
(lbs.)
Unit Wt.
(lbs.)*
10 10.75 6 17 4 9 3/8 19000 43.49 6 11 3/8 19000 46.87
12 12.75 8 19 1/4 4 10 3/8 19000 55.66 6 12 3/8 19000 59.04
14 14 8 21 4 11 19000 66.76 6 13 19000 70.14
16 16 10 23 4 12 26000 74.58 6 14 26000 77.96
18 18 10 25 4 13 26000 96.02 6 15 26000 99.4
20 20 12 27 4 14 26000 111.94 6 16 26000 117.04
24 24 12 31 1/2 4 16 35000 147.00 6 18 35000 152.1
30 30 17.5 38 4 19 38000 241.64 6 15 38000 248.44
36 36 20.5 44 4 22 41000 355.00 6 16 41000 365.00
42 42 23 1/2 50 4 25 44000 510.00 6 18 44000 525.00
APPLICATION: The Fig. 5220 Shoe is to be clamped to the pipe along the top edge and can also be welded to the base.
CONSTRUCTION: The Pipe Shoe is constructed of two braced vertical flat bars welded on a support flat bar of A-36 steel.
FINISH: The Pipe Shoe can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Pipe Shoe can be supplied in different BOP to TOS dimensions as well as different lengths.
ORDERING: See Page 2 for ordering instructions.
EXAMPLE: 3” - Fig.5220 - 4”x12” - S1/GP - T/T - AG
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 25/26
713-849-3366 | www.aaatech.com | [email protected] Page 23
PIPE SHOES
(All possible slot opons pictured for informaon purposes only)
FIG. 5500
SPLIT BEAM PIPE SHOE
Pipe Size R (IN) A (IN) B
C (IN) T (IN) T2 (IN) T3 (IN) WIDE STD.
20 10 20 1/2 20 6 14 3/8 1/2 3/8 ---
22 11 22 20 6 15 3/8 1/2 3/8 ---
24 12 23 1/2 20 6 16 3/8 1/2 3/8 ---
26 13 25 1/2 20 6 17 3/8 1/2 3/8 ---
28 14 27 20 6 18 3/8 1/2 3/8 ---
30 15 29 20 6 19 1/2 5/8 1/2 1/2
32
16
31
20
6
20 1/2
5/8
1/2
1/2 34 17 32 20 6 20 1/2 5/8 1/2 1/2
36 18 34 20 6 22 1/2 5/8 1/2 1/2
38 19 36 20 6 22 1/2 5/8 1/2 1/2
40 20 38 20 6 24 1/2 5/8 1/2 1/2
42 21 40 20 6 26 1/2 5/8 1/2 1/2
48 24 46 20 6 32 1/2 5/8 1/2 1/2
54 27 52 20 6 36 1/2 5/8 1/2 1/2
60 30 58 20 6 40 1/2 5/8 1/2 1/2
APPLICATION: The Fig. 5500 Heavy Duty Pipe Saddle is used to support large diameter pipe.
CONSTRUCTION: The Saddle is constructed of A-36 steel.
FINISH: The Saddle can be provided with a black, painted or hot dip galvanized finish.
OPTIONAL FEATURES: The Saddle can be supplied in different dimensions upon request.
ORDERING: To order specify pipe size and figure number and desired finish.
EXAMPLE: 20”-
Fig.6000-
Plain
7/27/2019 Pipe Shoe Catalog
http://slidepdf.com/reader/full/pipe-shoe-catalog 26/26
AAA TECHNOLOGY & SPECIALTIES CO., INC.
6219 Brimoore Road, Houston, Texas 77041-5114, U.S.A.
Telephone: 713-849-3366; FAX: 713-849-3654
E-mail: [email protected]; Website: hp://www.aaatech.com