pipe rack-3210 product sheet - g p masonry supply · pipe rack description: provides four support...

1
G P M a s o n r y S u p p l y - w w w . G P - M a s o n r y . c a - 1 - 8 0 0 - 4 4 0 - 0 6 4 7 5 6 1 0 ' * $ # 4 4 +' 4 5 * % 1 0 6 # + 0 ' 4 5 * 6 4 7 % - 5 ' 4 8 + % ' 5 5 # . ' 5 & 4 ' 0 6 # . 5 *Warning: All products that require installation or fabrication should never be done until you have the product in hand to take exact measurements. While every attempt is made to measure product specifications are accurate in these pages there is the possibility the products have been updated or a small variance between production has made the measurements off from what is in this book. Installation of our products may require some fabrication experience and in no way does warranty cover installation mistakes. Specifications: - 68 1/2” x 20 1/4” x 1 1/2” - 12 Lbs / 5.5 Kg per bracket - 16” Deep shelf - Roll stop tab for safety - Gusseted arms for strength Features: - Hooks to container D-Rings - Hooks to container corner castings - No bolting or welding to container - No Damage to container when uninstalled - Unobstructed storage space under shelf Pipe Rack Description: Provides four support arms mounted at 30 degrees to enhance volume capabilities. Each support arm is gusseted for added strength and includes roll stops. Provides 24 inches of open floor space below for storage.

Upload: others

Post on 14-Mar-2020

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Pipe Rack-3210 Product Sheet - G P Masonry Supply · Pipe Rack Description: Provides four support arms mounted at 30 degrees to enhance volume capabilities. Each support arm is gusseted

GP M

ason

ry S

upply

- www.GP-Masonry.ca - 1-800-440-0647

*

* *

&

*Warning: All products that require installation or fabrication should never be done until you have the product in hand to take exact measurements. While every attempt is made to measure product speci�cations are accurate in these pages there is the possibility the products have been updated or a small variance between production has made the measurements o� from what is in this book. Installation of our products may require some fabrication experience and in no way does warranty cover installation mistakes.

Speci�cations:- 68 1/2” x 20 1/4” x 1 1/2”- 12 Lbs / 5.5 Kg per bracket- 16” Deep shelf- Roll stop tab for safety- Gusseted arms for strength

Features:- Hooks to container D-Rings- Hooks to container corner castings- No bolting or welding to container- No Damage to container when uninstalled- Unobstructed storage space under shelf

Pipe Rack Description:Provides four support arms mounted at 30 degrees to enhance volume capabilities. Each support arm is gusseted for added strength and includes roll stops. Provides 24 inches of open �oor space below for storage.