8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 1/17

9/20/2014 ASME Standards - Piping Designer  

http://www.piping-designer.com/ASME_Standards 1

1Thích   Tweet   0   0

Admin Log in

ASME Standards

Search

Search  

Namespaces

PageDiscussion

Variants

Views

View

View sourceHistory

Actions

HomeCalculationsCompaniesDatasheetsDisciplinesDownloads

StandardsTrade AssociationsThe WorldContact

8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 2/17

9/20/2014 ASME Standards - Piping Designer  

http://www.piping-designer.com/ASME_Standards 2

Navigation

Category: Piping Designer ResourcesCategory: Trade AssociationsCategory: StandardsArticle: ASME Standards

Additional Info

Article: American Society of Mechanical Engineers

Piping Designer - Resources for piping, engineering and design

Contents

1 Codes and Sections1.1 Authorizes Inspections1.2 Automotive

1.3 Bioprocess1.4 Blanks1.5 Boilers1.6 Career and Guidance1.7 Center for Research and Technology1.8 Certification and Accreditation (C/S)1.9 Certification and Accreditation (EDU)1.10 Chains1.11 Chemical/Process1.12 Compressors1.13 Computational/Analysis

Hanoi &HoChiMinhOffices

en.regus.com.vn/Service…

Furnished & Ready-

to-Go Offices. 2

Months Free on

Offices.Quote Now!

8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 3/17

9/20/2014 ASME Standards - Piping Designer  

http://www.piping-designer.com/ASME_Standards 3

1.14 Computing/Information Science and Engineering1.15 Controls1.16 Conveyors1.17 Cranes and Hoists1.18 Design1.19 Elevators and Escalators1.20 Energy Efficiency1.21 Engineering Drawings and Related Practices1.22 Environmental1.23 Fasteners1.24 Fitness for Service1.25 Fittings, Flanges & Gaskets1.26 Fossil1.27 Gauges and Gaging1.28 General Interest1.29 Geometric Dimensioning and Tolerancing1.30 Heating,Ventilating and Air-Conditioning1.31 Industrial Gas1.32 Internal Combustion Engine1.33 Keys and Keyseats1.34 Limits and Fits1.35 Materials1.36 Measurement1.37 Medical/Health1.38 Metal Product Sizes1.39 Metric System1.40 Noise Control and Acoustics1.41 Non-Personnel and Personnel Lifting Devices1.42 Nondestructive Evaluation/Examination1.43 Nuclear 1.44 Operator Qualification and Certification

1.45 Performance Test Codes1.46 Piping and Pipelines1.47 Plant Operations1.48 Plumbing1.49 Post Construction1.50 Pressure Vessels1.51 Pumps1.52 Rail Transportation1.53 Reinforced Thermo, Plastic Corrosion Resistance1.54 Renewable/Alternative Energy1.55 Risk Analysis

1.56 Screw Threads1.57 Steam Table1.58 Steel Stacks1.59 Surface Quality1.60 Testing1.61 Textile Engineering1.62 Tools1.63 Turbines1.64 Valves1.65 Waste1.66 Water Management

8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 4/17

9/20/2014 ASME Standards - Piping Designer  

http://www.piping-designer.com/ASME_Standards 4

1.67 Welding & Brazing

Codes and Sections

Authorizes Inspections

Automotive

Bioprocess

Blanks

Boilers

ASME BIO - Guide for ASME Stamp Holders for Section VIII Division 1 Vessels and the PressureEquipment Directive

ASME BPVC - Boiler and Pressure Vessel Code Complete SetASME BPVC-I - BPVC Section I - Power BoilersASME BPVC-IIA - BPVC Section II - Materials Part A - Ferrous Material SpecificationsASME BPVC-IIB - BPVC Section II - Materials Part B - Nonferrous Material SpecificationsASME BPVC-IIC - BPVC Section II - Materials Part C - Specifications for Welding Rods Electrodes andFiller MetalsASME BPVC-IID - BPVC Section II - Materials Part D - Properties-(Customary)ASME BPVC-II DM - Properties, Metric VersionASME BPVC-III-2 - BPVC Section III - Rules for Construction of Nuclear Facility Components Division2 - Code for Concrete ContainmentsASME BPVC-III-3 - BPVC Section III - Rules for Construction of Nuclear Facility Components Div 3 -Containments for Transportation & Storage of Spent Nuclear Fuel & High Level Radioactive Mat & WasASME BPVC-III NB - BPVC Section III - Rules for Construction of Nuclear Facility ComponentsDivision 1 - Subsection NB Class 1 ComponentsASME BPVC-III NC - BPVC Section III - Rules for Construction of Nuclear Facility ComponentsDivision 1 - Subsection NC Class 2 ComponentsASME BPVC-III NCA - BPVC Section III - Rules for Construction of Nuclear Facility ComponentsSubsection NCA - General Requirements Division 1 & 2ASME BPVC-III ND - Rules for Construction of Nuclear Power Plant Components - Class 3 ComponentASME BPVC-III NE - BPVC Section III - Rules for Construction of Nuclear Facility ComponentsDivision 1 - Subsection NE Class MC ComponentsASME BPVC-III NF - BPVC Section III - Rules for Construction of Nuclear Facility ComponentsDivision 1 - Subsection NF SupportsASME BPVC-III NG - BPVC Section III - Rules for Construction of Nuclear Facility ComponentsDivision 1 - Subsection NG Core Support StructuresASME BPVC-III NH - BPVC Section III Rules for Construction of Nuclear Facility Components Divisio1 - Subsection NH Class 1 Components in Elevated Temperature ServiceASME BPVC-III APP - Rules for Construction of Nuclear Power Plant Components - AppendicesASME BPVC-IV - BPVC Section IV - Rules for Construction of Heating BoilersASME BPVC-V - Nondestructive ExaminationASME BPVC-VI] - Recommended Rules for Care and Operation of Heating BoilersASME BPVC-VII - Recommended Guidelines for the Care of Power BoilersASME BPVC-VIII-1 - Rules for Construction of Pressure VesselsASME BPVC-VIII-2 - Rules for Construction of Pressure Vessels

8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 5/17

8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 6/17

9/20/2014 ASME Standards - Piping Designer  

http://www.piping-designer.com/ASME_Standards 6

Computing/Information Science and Engineering

Controls

Conveyors

Cranes and Hoists

ASME B29.24M - Roller Load Chains For Overhead HoistsASME B30.1 - JacksASME B30.2 - Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, TopRunning Trolley Hoist)ASME B30.3 - Construction Tower CranesASME B30.4 - Portal, Tower, and Pedestal CranesASME B30.5 - Mobile and Locomotive CranesASME B30.6 - DerricksASME B30.7 - Base-Mounted Drum HoistsASME B30.8 - Floating Cranes and Floating DerricksASME B30.9 - SlingsASME B30.10 - HooksASME B30.11 - Monorails and Underhung CranesASME B30.12 - Handling Loads Suspended from RotorcraftASME B30.13 - Storage/Retrieval (S/R) Machines and Associated EquipmentASME B30.14 - Side Boom TractorsASME B30.16 - Overhead Hoists (Underhung)ASME B30.17 - Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist)ASME B30.18 - Stacker Cranes (Top or Under Running Bridge, Multiple Girder with Top or Under Running Trolley Hoist)ASME B30.19 - CablewaysASME B30.20 - Below-the-Hook Lifting Devices

ASME B30.21 - Manually Lever Operated HoistsASME B30.22 - Articulating Boom CranesASME B30.23 - Personnel Lifting SystemsASME B30.24 - Roller Load Chains for Overhead HoistsASME B30.25 - Scrap and Material HandlersASME B30.26 - Rigging HardwareASME B30.27 Material Placement SystemsASME BTH-1 - Design of Below-the-Hook Lifting DevicesASME HST-1 - Performance Standard for Electric Chain HoistsASME HST-2 - Performance Standard for Hand Chain Manually Operated Chain HoistsASME HST-3 - Performance Standard for Manually Lever Operated Chain Hoists

ASME HST-4 - Performance Standard for Overhead Electric Wire Rope HoistsASME HST-5 - Performance Standard for Air Chain HoistsASME HST-6 - Performance Standard for Air Wire Rope HoistsASME NOG-1 - Rules for Construction of Overhead and Gantry Cranes (Top Running Bridge, MultipleGirder)ASME NUM-1 - Rules for Construction of Cranes, Monorails, and Hoists (with Bridge or Trolley or Hoisof the Underhung Type)

Design

8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 7/17

9/20/2014 ASME Standards - Piping Designer  

http://www.piping-designer.com/ASME_Standards 7

Elevators and Escalators

Energy Efficiency

Engineering Drawings and Related Practices

ASME B5.46 - Symbols For Machine Tool Indicator PlatesASME B5.51M - Preferred SI Units for Machine Tools

ASME SI-1 - ASME Orientation and Guide for Use of SI-1 (Metric) UnitsASME Y14.1 - Decimal Inch Drawing Sheet Size and FormatASME Y14.1M - Metric Drawing Sheet Size and FormatASME Y14.2M - Line Conventions and LetteringASME Y14.3 - Multiview and Sectional View DrawingsASME Y14.3M - Multiview And Sectional View DrawingsASME Y14.4M - Pictorial DrawingASME Y14.5M - Dimensioning and TolerancingASME Y14.5.1M - Mathematical Definition of Dimensioning and Tolerancing PrinciplesASME Y14.5.2 - Certification of Geometric Dimensioning and Tolerancing ProfessionalsASME Y14.6 - Screw Thread Representation

ASME Y14.7.1 - Gear Drawing Standards-Parts 1: For Spur, Helical, Double Helical and Rack ASME Y14.7.2 - Gear and Spline Drawing Standards-Part 2: Bevel and Hypoid GearsASME Y14.8M - Castings and ForgingsASME Y14.13M - Mechanical Spring RepresentationASME 'Y14.18M - Optical PartsASME Y14.24 - Types and Applications of Engineering DrawingsASME Y14.32.1M - Chassis Frames-Passenger Car and Light Truck-Ground Vehicle PracticesASME Y14.34M - Associated ListsASME Y14.35M - Revision of Engineering Drawings and Associated DocumentsASME Y14.36M - Surface Texture SymbolsASME Y14.38 - Abbreviations and Acronyms for Use on Drawings and Related Documents

ASME Y14.41 - Digital Product Definition Data PracticesASME Y14.42 - Digital Approval SystemsASME Y14.43 - Dimensioning and Tolerancing Principles for Gages and FixturesASME Y14.100 - Engineering Drawing PracticesASME Y32.2.3 - Graphic Symbols For Pipe Fittings, Valves And PipingASME Y32.2.4 - Graphic Symbols For Heating, Ventilating And Air ConditioningASME Y32.4 - Graphic Symbols for Plumbing Fixtures for Diagrams Used in Architecture & BuildingConstructionASME Y32.7 - Graphics Symbols for Railroad Maps and ProfilesASME Y32.10 - Graphic Symbols for Fluid Power DiagramsASME Y32.11 - Graphic Symbols For Process Flow Diagrams In Petroleum And Chemical Industries

ASME Y32.18 - Symbols For Mechanical And Acoustical Elements As Used In Schematic Diagrams

Environmental

Fasteners

ASME B18.1.1 - Small Solid RivetsASME B18.1.2 - Large RivetsASME B18.1.3M - Metric Small Solid RivetsASME B18.2.1 - Square and Hex Bolts and Screws, Inch SeriesASME B18.2.2 - Square and Hex Nuts

8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 8/17

8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 9/17

9/20/2014 ASME Standards - Piping Designer  

http://www.piping-designer.com/ASME_Standards 9

ASME B18.16M - Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange NutsASME B18.18.1 - Inspection and Quality Assurance for General Purpose FastenersASME B18.18.1 - Inspection and Quality Assurance for General Purpose FastenersASME B18.18.2M - Inspection and Quality Assurance for High-Volume Machine Assembly FastenersASME B18.18.2M - SUPPLEMENT (Supplement of ASME B18.18.2M) Inspection and QualityAssurance for High-Volume Machine Assembly FastenersASME B18.18.3M - Inspection and Quality Assurance for Special Purpose FastenersASME B18.18.4M - Inspection and Quality Assurance for Fasteners for Highly Specialized EngineeredApplications for Metric FastenersASME B18.18.5M - Inspection and Quality Assurance Plan Requiring In-Process Inspection and ControlASME B18.18.6M - Quality Assurance Plan for Fasteners Produced in a Third Party Accreditation SystemASME B18.18.7M - Quality Assurance Plan for Fasteners Produced in a Customer Approved Control PlaASME B18.2.9 - Straightness Gage and Gaging for Bolts and ScrewsASME B18.21.1 - Lock Washers, Inch SeriesASME B18.21.2M - Lock Washers, Metric SeriesASME B18.22.1 - Plain WashersASME B18.22M - Metric Plain WashersASME B18.24 - Part Identifying Number (PIN) Code System Standard for B18 Fastener ProductsASME B18.25.1M - Square and Rectangular Keys and KeywaysASME B18.25.2M - Woodruff Keys and KeywaysASME B18.25.3M - Square and Rectangular Keys and Keyways: Width Tolerances and DeviationsGreater than Basic SizeASME B18.27 - Tapered and Reduced Cross Section Retaining Rings, Inch SeriesASME B18.29.1 - Helical Coil Screw Thread Inserts - Free Running and Screw Locking, Inch SeriesASME B18.29.2M - Helical Coil Screw Thread Inserts - Free Running and Screw Locking, Metric SeriesASME B18.30.1M - Open-End Blind Rivets with Break Mandrels, Metric SeriesASME B18.31.1M - Metric Continuous and Double End Studs

Fitness for Service

Fittings, Flanges & Gaskets

ASME B16.1 - Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250ASME B16.3 - Malleable Iron Threaded Fittings: Classes 150 and 300ASME B16.4 - Gray Iron Threaded Fittings: (Classes 125 and 250)ASME B16.5 - Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch StandardASME B16.9 - Factory-Made Wrought Buttwelding FittingsASME B16.10 - Face to Face and End to End Dimensions of ValvesASME B16.11 - Forged Fittings, Socket-Welding and ThreadedASME B16.12 - Cast Iron Threaded Drainage FittingsASME B16.14 - Ferrous Pipe Plugs, Bushings and Locknuts with Pipe Threads

ASME B16.15 - Cast Copper Alloy Threaded Fittings: Classes 125 and 250ASME B16.18 - Cast Copper Alloy Solder Joint Pressure FittingsASME B16.20 - Metallic Gaskets for Pipe Flanges: Ring-Joint, Spiral-Wound, and JacketedASME B16.21 - Nonmetallic Flat Gaskets for Pipe FlangesASME B16.22 - Wrought Copper and Copper Alloy Solder Joint Pressure FittingsASME B16.23 - Cast Copper Alloy Solder Joint Drainage Fittings: DWVASME B16.24 - Cast Copper Alloy Pipe Flanges and Flanged Fittings: Classes 150, 300, 600, 900, 1500and 2500ASME B16.25 - Buttwelding EndsASME B16.26 - Cast Copper Alloy Fittings for Flared Copper TubesASME B16.28 - Wrought Steel Buttwelding Short Radius Elbows and Returns

8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 10/17

9/20/2014 ASME Standards - Piping Designer  

http://www.piping-designer.com/ASME_Standards 10

ASME B16.29 - Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings-DWVASME B16.33 - Manually Operated Metallic Gas Valves for use in Gas Piping Systems up to 125 psi(Sizes NPS 1/2 - NPS 2)ASME B16.34 - Valves Flanged, Threaded and Welding EndASME B16.36 - Orifice FlangesASME B16.38 - Large Metallic Valves for Gas Distribution: Manual Operated,NPS 2 1/2 (DN 65) to NP12 (DN 300), 125 psig (8.6 bar) MaximumASME B16.39 - Malleable Iron Threaded Pipe Unions: Classes 150, 250, and 300ASME B16.40 - Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution SystemsASME B16.42 - Ductile Iron Pipe Flanges and Flanged Fittings: Classes 150 and 300ASME B16.44 - Manually Operated Metallic Gas Valves for use in Above Ground Piping Systems up to

 psiASME B16.45 - Cast Iron Fittings for Sovent Drainage SystemsASME B16.47 - Large Diameter Steel Flanges: NPS 26 Through NPS 60 Metric/Inch StandardASME B16.48 - Line BlanksASME B16.49 - Factory-Made, Wrought Steel, Buttwelding Induction Bends for Transportation andDistribution SystemsASME B16.50 - Wrought Copper and Copper Alloy Braze-Joint Pressure FittingsASME PCC-1 - Guidelines for Pressure Boundary Bolted Flange Joint AssemblyASME Y32.2.3 - Graphic Symbols for Pipe Fittings, Valves And Piping

Fossil

Gauges and Gaging

ASME B1.2 - Gages and Gaging for Unified Inch Screw ThreadsASME B1.3M - Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric ScrewThreads (UN, UNR, UNJ, M and MJ).ASME B1.16M - Gages and Gaging for Metric M Screw ThreadsASME B1.20.5 - Gaging for Dryseal Pipe Threads (Inch)

ASME B1.22M - Gages and Gaging for MJ Series Metric Screw ThreadsASME B1 TECH REPORT - Measurement Uncertainty for 60 Degree Screw Thread Gage ElementMeasurement (Inch and Metric)ASME B18.2.9 - Straightness Gage and Gaging for Bolts and ScrewsASME B40.100 - Pressure Gauges and Gauge AttachmentsASME B40.200 - Thermometers, Direct Reading and Remote ReadingASME B89.1.2M - Calibration of Gage Blocks by Contact Comparison Methods, Through 20 inch and 50mmASME B89.1.5 - Measurement of Plain External Diameters for use as Master Discs or Cylindrical PlugGagesASME B89.1.6 - Measurement of Plain Internal Diameters for use as Master Rings or Ring Gauges

ASME B89.1.9 - Gage BlocksASME B89.1.10M - Dial Indicators (for Linear Measurements)ASME B89.1.13 - MicrometersASME Y14.43 - Dimensioning and Tolerancing Principles for Gages and Fixtures

General Interest

Geometric Dimensioning and Tolerancing

Heating,Ventilating and Air-Conditioning

8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 11/17

9/20/2014 ASME Standards - Piping Designer  

http://www.piping-designer.com/ASME_Standards 11

Industrial Gas

Internal Combustion Engine

Keys and Keyseats

ASME B17.1 - Keys and KeyseatsASME B17.2 - Woodruff Keys and Keyseats

ASME B18.25.1M - Square and Rectangular Keys and KeywaysASME B18.25.2M - Woodruff Keys and Keyways (Metric)ASME B18.25.3M - Square and Rectangular Keys and Keyways: Width Tolerances and DeviationsGreater than Basic Size (Metric)

Limits and Fits

Materials

Measurement

ASME B40.100 - Pressure Gauges and Gauge AttachmentsASME B40.200 - Thermometers, Direct Reading and Remote ReadingASME B89.1.2M - Calibration of Gage Blocks by Contact Comparison Methods (Through 20 in. and 500mm)ASME B89.1.5 - Measurement of Plain External Diameters for Use as Master Discs or Cylindrical PlugGagesASME B89.1.6 - Measurement of Plain Internal Diameters for use as Master Rings or Ring GagesASME B89.1.9 - Gage BlocksASME B89.1.10M - Dial Indicators (for Linear Measurements)ASME B89.1.13 - Micrometers

ASME B89.1.17 - Measurement of Thread Measuring WiresASME B89.3.1 - Measurement of Out-of-RoundnessASME B89.3.4M - Axes of Rotation - Methods for Specifying and TestingASME B89.4.1 - Methods for Performance Evaluation of Coordinate Measuring Machines (CMM)ASME B89.4.10 - Methods for Performance Evaluation of Coordinate Measuring Systems SoftwareASME B89.4.19 - Performance Evaluation of Laser-Based Spherical Coordinate Measurement SystemsASME B89.4.22 - Methods for Performance Evaluation of Articulated Arm Coordinate MeasuringMachines (CMM)ASME B89.6.2 - Temperature and Humidity Environment for Dimensional MeasurementASME B89.7.2 - Dimensional Measurement PlanningASME B89.7.3.1 - Guidelines for Decision Rules: Considering Measurement Uncertainty in Determining

Conformance to SpecificationsASME B89.7.3.2 - Guidelines for the Evaluation of Dimensional Measurement UncertaintyASME B89.7.3.3 - Guidelines for Assessing the Reliability of Dimensional Measurement UncertaintyStatementsASME B89.7.4.1 - Measurement Uncertainty and Conformance Testing: Risk AnalysisASME B89.7.5 - Metrological Traceability of Dimensional Measurements to the SI Unit of LengthASME B89 TECH PAPER - Space Plate Test Recommendations for Coordinate Measuring Machines(CMM’s)ASME B89 TECH REPORT - RPT Parametric Calibration of Coordinate Measuring Machines(CMM’s)ASME MFC-1M - Glossary of Terms Used in the Measurement of Fluid Flow in Pipes

8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 12/17

9/20/2014 ASME Standards - Piping Designer  

http://www.piping-designer.com/ASME_Standards 12

ASME MFC-2M - Measurement Uncertainty for Fluid Flow in Closed ConduitsASME MFC-3M - Measurement of Fluid Flow in Pipes Using Orifice, Nozzle and VenturiASME MFC-4M - Measurement of Gas Flow by Turbine MetersASME MFC-5M - Measurement of Liquid Flow in Closed Conduits Using Transit-Time UltrasonicFlowmetersASME MFC-6M - Measurement of Fluid Flow in Pipes Using Vortex FlowmetersASME MFC-7M - Measurement of Gas Flow by Means of Critical Flow Venturi NozzlesASME MFC-8M - Fluid Flow in Closed Conduits: Connections for Pressure Signal TransmissionsBetween Primary and Secondary DevicesASME MFC-9M - Measurement of Liquid Flow in Closed Conduits by Weighing MethodsASME MFC-10M - Method for Establishing Installation Effects on FlowmetersASME MFC-11 - Measurement of Fluid Flow by Means of Coriolis Mass FlowmetersASME MFC-12M - Measurement of Fluid Flow in Closed Conduits Using Multiport Averaging PitotPrimary ElementsASME MFC-13M - Measurement of Fluid Flow in Closed Conduits: Tracer MethodsASME MFC-14M - Measurement of Fluid Flow Using Small Bore Precision Orifice MetersASME MFC-16 - Measurement of Liquid Flow in Closed Conduits With Electromagnetic FlowmetersASME MFC-18M - Measurement of Fluid Flow Using Variable Area MetersASME MFC-22 - Measurement of Liquid by Turbine FlowmetersASME PTC 19.2 - Pressure MeasurementASME PTC 19.3 - Temperature MeasurementASME PTC 19.5 - Flow Measurement

Medical/Health

Metal Product Sizes

Metric System

Noise Control and Acoustics

Non-Personnel and Personnel Lifting Devices

Nondestructive Evaluation/Examination

Nuclear

ASME AG-1 - Code on Nuclear Air and Gas TreatmentASME N278.1 - Self-Operated and Power-Operated Safety-Related Valves Functional SpecificationStandard

ASME N509 - Nuclear Power Plant Air-Cleaning Units and ComponentsASME N510 - Testing of Nuclear Air Treatment SystemsASME NOG-1 - Rules for Construction of Overhead and Gantry Cranes (Top Running Bridge, MultipleGirder)ASME NQA - TECH RPT Comparison of ASME NQA-1 and ISO 9001.ASME NQA-1 - Quality Assurance Requirements for Nuclear Facility Applications (QA)ASME NUM-1 - Rules for Construction of Cranes, Monorails and Hoists (with Bridge or Trolley or Hoisof the Underhung Type)ASME OM - Code for Operation and Maintenance of Nuclear Power PlantsASME OM-S/G - Standards and Guides for Operation and Maintenance of Nuclear Power PlantsASME QME-1 - Qualification of Active Mechanical Equipment Used in Nuclear Power Plants

8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 13/17

9/20/2014 ASME Standards - Piping Designer  

http://www.piping-designer.com/ASME_Standards 13

ASME RA-S - Standard for Probabilistic Risk Assessment for Nuclear Power Plant Applications

Operator Qualification and Certification

Performance Test Codes

Piping and Pipelines

ASME B31.1 - Power PipingASME B31.2 - Fuel Gas PipingASME B31.3 - Process PipingASME B31.4 - Pipeline Transportation Systems for Liquid Hydrocarbons and Other LiquidsASME B31.5 - Refrigeration Piping and Heat Transfer ComponentsASME B31.8 - Gas Transmission and Distribution Piping SystemsASME B31.8S - Managing System Integrity of Gas PipelinesASME B31.9 - Building Services PipingASME B31.11 - Slurry Transportation Piping SystemsASME B31.12 - Hydrogen Piping and PipelinesASME B31E - Standard for the Seismic Design and Retrofit of Above-Ground Piping Systems

ASME B31G - Manual for Determining the Remaining Strength of Corroded Pipelines: Supplement toASME B31 Code for Pressure PipingASME B31J - Standard Test Method for Determining Stress Intensification Factors (i-Factors) for MetallPiping ComponentsASME B31Q - Pipeline Personnel QualificationASME B36.10M - Welded and Seamless Wroth Steel PipeASME B36.19M - Stainless Steel Pipe

Plant Operations

Plumbing

ASME A112.1.2 - Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water-ConnectedReceptors)ASME A112.1.3 - Air Gap Fittings for Use with Plumbing Fixtures, Appliances and AppurtenancesASME A112.3.1 - Performance Standard and Installation Procedures for Stainless Steel Drainage Systemfor Sanitary, Storm and Chemical Applications, Above and Below GroundASME A112.3.4 - Macerating Toilet Systems and Related ComponentsASME A112.4.1 - Water Heater Relief Valve Drain TubesASME A112.4.2 - Water Closet Personal Hygiene DevicesASME A112.4.3 - Plastic Fittings for Connecting Water Closets to the Sanitary Drainage SystemASME A112.4.7 - Point of Use and Branch Water Submetering SystemsASME A112.4.14 - Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing SystemsASME A112.6.1M - Floor-Affixed Supports for Off-the-Floor Plumbing Fixtures for Public UseASME A112.6.2 - Framing-Affixed Supports for Off-the-Floor Water Closets with Concealed TanksASME A112.6.3 - Floor Drains and Trench DrainsASME A112.6.4 - Roof, Deck and Balcony DrainsASME A112.6.7 - Enameled and Epoxy Coated Cast Iron and PVC Plastic Sanitary Floor SinksASME A112.6.9 - Siphonic Roof DrainsASME A112.14.1 - Backwater ValvesASME A112.14.3 - Grease InterceptorsASME A112.14.4 - Grease Removal DevicesASME A112.14.6 - FOG (Fats, Oils and Greases) Disposal Systems

8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 14/17

9/20/2014 ASME Standards - Piping Designer  

http://www.piping-designer.com/ASME_Standards 14

ASME A112.18.1 - Plumbing Supply FittingsASME A112.18.2 - Plumbing Waste FittingsASME A112.18.3 - Performance Requirements for Backflow Protection Devices and Systems in PlumbinFixture FittingsASME A112.18.6 - Flexible Water ConnectorsASME A112.18.7 - Deck Mounted Bath/Shower Transfer Valves with Integral Backflow ProtectionASME A112.19.1M - Enameled Cast Iron Plumbing FixturesASME A112.19.2 - Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets anUrinalsASME A112.19.3 - Stainless Steel Plumbing Fixtures (Designed for Residential Use)ASME A112.19.4M - Porcelain Enameled Formed Steel Plumbing FixturesASME A112.19.5 - Trim for Water-Closet Bowls, Tanks and UrinalsASME A112.19.6 - Hydraulic Performance Requirements for Water Closets and UrinalsASME A112.19.7 - Hydromasssage Bathtub Appliances - Suction Fittings for Use in Swimming Pools,Wading Pools, Spas and Hot TubsASME A112.19.9M - Non-Vitreous Ceramic Plumbing FixturesASME A112.19.10 - Dual Flush Devices for Water ClosetsASME A112.19.12 - Wall Mounted, Pedestal Mounted, Adjustable, Elevating, Tilting, and PivotingLavatory, Sink, and Shampoo Bowl Carrier Systems and Drain Waste SystemsASME A112.19.13 - Electrohydraulic Water ClosetsASME A112.19.14 - Six-Liter Water Closets Equipped with a Dual Flushing DeviceASME A112.19.15 - Bathtubs/Whirlpool Bathtubs with Pressure Sealed DoorsASME A112.19.16 - Terrazzo Plumbing FixturesASME A112.19.17 - Manufactured Safety Vacuum Release Systems (SVRS) for Residential andCommercial Swimming Pool, Spa, Hot Tub, and Wading Pool Suction SystemsASME A112.19.19 - Vitreous China Nonwater UrinalsASME A112.20.1 - Qualification of Installers of High Purity Piping SystemsASME A112.20.2 - Qualification of Installers of Firestop Systems and Devices For Piping SystemsASME A112.21.3M - Hydrants for Utility and Maintenance UseASME A112.36.2M - CleanoutsASME B31.9 - Building Services Piping

Post Construction

Pressure Vessels

Pumps

ASME B73.1 - Specification for Horizontal End Suction Centrifugal Pumps for Chemical ProcessASME B73.1M - Specification For Horizontal End Suction Centrifugal Pumps For Chemical ProcessASME B73.2 - Specifications for Vertical In-Line Centrifugal Pumps for Chemical Process

ASME B73.3- Specification for Sealless Horizontal End Suction Metallic Centrifugal Pumps for ChemicaProcessASME B73.5M - Thermoplastic/Thermoset Polymer Material Horizontal End Suction Centrifugal PumpsChemical ProcessASME PTC 8.2 - Centrifugal PumpsASME PTC 9 - Displacement Compressors, Vacuum Pumps And BlowersASME PTC 18 - Hydraulic Turbines and Pump-Turbines

Rail Transportation

Reinforced Thermo, Plastic Corrosion Resistance

8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 15/17

9/20/2014 ASME Standards - Piping Designer  

http://www.piping-designer.com/ASME_Standards 15

Renewable/Alternative Energy

Risk Analysis

Screw Threads

ASME B1.1 - Unified Inch Screw Threads, (UN and UNR Thread Form)ASME B1.2 - Gages and Gaging for Unified Inch Screw Threads

ASME B1.3 - Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN,UNR, UNJ, M, and MJ)ASME B1.3M - Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric ScrewThreads (UN, UNR, UNJ, M and MJ).ASME B1.5 - Acme Screw ThreadsASME B1.7 - Screw Threads: Nomenclature, Definitions, and Letter SymbolsASME B1.8 - Stub Acme Screw ThreadsASME B1.9 - Buttress Inch Screw Threads (7 Degree/45 Degree Form with 0.5 Pitch Basic Height of Thread Engagement)ASME B1.10M - Unified Miniature Screw ThreadsASME B1.11 - Microscope Objective Thread

ASME B1.12 - Class 5 Interference-Fit ThreadASME B1.13M - Metric Screw Threads: M ProfileASME B1.15 - Unified Inch Screw Threads, (UNJ Thread Form)ASME B1.16M - Gages and Gaging for Metric M Screw ThreadsASME B1.20.1 - Pipe Threads, General Purpose, InchASME B1.20.2M - Pipe Threads, 60 Degree, General PurposeASME B1.20.3 - Dryseal Pipe Threads, InchASME B1.20.5 - Gaging for Dryseal Pipe Threads-InchASME B1.20.7 - Hose Coupling Screw Threads (Inch)ASME B1.21M - Metric Screw Threads: MJ ProfileASME B1.22M - Gages and Gaging for MJ Metric Screw Threads

ASME B1.30 - Screw Threads: Standard Practice for Calculating and Rounding DimensionsASME B1 - Technical Report Measurement Uncertainty for 60 Degree Screw Thread Gage ElementMeasurement (Inch and Metric)ASME B47.1 - Gage BlanksASME B94.9 - Taps: Ground and Cut Threads (Inch and Metric Sizes)ASME Y14.6 - Screw Thread Representation

Steam Table

Steel Stacks

Surface Quality

Testing

Textile Engineering

Tools

Turbines

8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 16/17

9/20/2014 ASME Standards - Piping Designer  

http://www.piping-designer.com/ASME_Standards 16

ASME PTC 4 - Fired Steam GeneratorsASME PTC 4.4 - Gas Turbine Heat Recovery Steam GeneratorsASME PTC 6 - Steam TurbinesASME PTC 6.2 - Steam Turbines in Combined CyclesASME PTC 6 REPORT - Guidance for Evaluation of Measurement Uncertainty in Performance Tests of Steam TurbinesASME PTC 6A - Appendix A to PTC6, the Test Code for Steam TurbinesASME PTC 6S REPORT - Procedures for Routine Performance Tests of Steam TurbinesASME PTC 8.2 - Centrifugal PumpsASME PTC 18 - Hydraulic Turbines and Pump-TurbinesASME PTC 22 - Performance Test Codes on Gas TurbinesASME PTC 25 - Pressure Relief DevicesASME PTC 29 - Speed-Governing Systems for Hydraulic Turbine-Generator UnitsASME 'PTC 42 - Wind TurbinesASME PTC 47 - Integrated Gasification Combined Cycle Power Generation PlantsASME TDP-1 - Recommended Practices for the Prevention of Water Damage to Steam Turbines used forElectric Power Generation: Fossil-Fuel Plants

Valves

ASME A112.4.14 - Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing SystemsASME A112.14.1 - Backwater ValvesASME A112.18.7 - Deck Mounted Bath/Shower Transfer Valves with integral Backflow ProtectionASME B16.10 - Face-to-Face and End-to-End Dimensions of ValvesASME B16.33 - Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psi(Sizes NPS 1/2 – NPS 2)ASME B16.34 - Valves - Flanged, Threaded and Welding EndASME B16.38 - Large Metallic Valves for Gas Distribution: Manual Operated, NPS 2 1/2 (DN 65) to NP12 (DN 300), 125 psig (8.6 bar) MaximumASME B16.40 - Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution SystemsASME B16.44 - Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems up to 5

 psiASME N278.1 - Self-Operated and Power-Operated Safety-Related Valves Functional SpecificationStandardASME OM CODE - Code for Operation and Maintenance of Nuclear Power PlantsASME OM-S/G - Standards and Guides for Operation and Maintenance of Nuclear Power PlantsASME PCT 25 - Pressure Relief DevicesASME QME-1 - Qualification of Active Mechanical Equipment Used in Nuclear Power Plants

Waste

Water Management

Welding & Brazing

Retrieved from "http://www.piping-designer.com/wiki/index.php?title=ASME_Standards&oldid=105487"Category: Standards

QCI CMM Styliqci.co.kr

CMM Styli Made in Korea

8/10/2019 Pipe ASME Standards - Piping Designer

http://slidepdf.com/reader/full/pipe-asme-standards-piping-designer 17/17

9/20/2014 ASME Standards - Piping Designer  

Tools

What links hereRelated changesSpecial pagesPrintable versionPermanent link 

Page information

This page was last modified at 28 June 2014, at 14:54.This page has been accessed 4,191 times.Site Map

© 2006-2014 Piping Designer, LLC - All Rights Reserved

 This work by Piping-Designer, LLC is licensed under a Creative Commons Attribution- NonCommercial-NoDerivs 3.0 Unported License.