PING-TENG CHANG

Tunghai UniversityDepartment of Industrial Engineering and Enterprise

InformationTaichung 407, Taiwan, ROC

Tel: +886-4-23594319 ext. 123; Fax: +886-4-23591756E-mail: ptchang@ie.thu.edu.tw

ACADEMIC EXPERIENCES

2009/01 Present Editor-in-Chief, International Journal of Artificial Life Research

2004/112008/10 Editor-in-Chief, International Journal of Operations Research

2004/8 2007/7 Chairman, Department of Industrial Engineering and Enterprise Information, Tunghai University

2003/9 2005/11 President, Operations Research Society of Taiwan

2003/1 2005/11 President, INFORMS Taiwan Chapter

2001/8 Present Professor, Department of Industrial Engineering and Enterprise Information, Tunghai University

1996/8 2001/7 Associate Professor, Department of Industrial Engineering, Tunghai University

1994/8 1996/7 Associate Professor, Department of Industrial Management & Institute of Management Science, I-Shou University

SOCIETY SERVICES

Directorate, The Chinese Institute of Industrial Engineers, 2005 2006, 2007 2008

Directorate, The Operations Research Society of Taiwan, 2010 2011

Board of Controllers, The Operations Research Society of Taiwan, 2008 2009

Executive Controller, The Operations Research Society of Taiwan, 2006 2007

President, The Operations Research Society of Taiwan, 2003/9 2005/11

President, The INFORMS Taiwan Chapter, 2003/1 2005/11

Ping-Teng Chang

PAPER, THESIS, RESEARCH AWARDS

“Paper Contest of the 2006 Conference of the Chinese Institute of Industrial Engineers” “Excellence” (A Study of Analysis of Multi-generation Product Diffusion Pricing Models for DRAM; with M.S. graduates S.-C. Chen and M.-Y. Hsieh)

“Paper Contest of the 2006 Int’l Conference on New Global Management Environment” “Best Paper” (Combining Meta-heuristic and Support Vector Machines in Predicting the Protein Structure; with Dr. P.-F. Pai, Ph.D. students W.-C. Hong and S.-L. Yang)

“The 2004 Industrial Engineering Paper Award”, Chinese Institute of Industrial Engineers (Fuzzy Message Requirement Classifiers System and an Application to the IC Test Machine Diagnostics-I; with M.S. graduates C.-H. Liu, Y.-T. Lo and Y.-J. Szu)

“The 2009 Master Thesis Award of the Operations Research Society of Taiwan” “Honorable Mention” (Protein Clustering with Mixed Structure and Application of Fuzzy Set Theory; supervise M.S. student Y.-L. Li)

“The 2009 Master Thesis Award of the Operations Research Society of Taiwan”– “Honorable Mention” (Study of Real Function Problem Solution of MBO; supervise M.S. student W.-C. Chuang)

“The 2007 Ph.D. Dissertation Award of the Operations Research Society of Taiwan” “Excellence First Place”(Study of Fuzzy Arithmetic and Fuzziness Accumulation Controlling Method for System Dynamics with Fuzzy Arithmetic; supervise Ph.D. student K.-P. Lin)

“The 2006 Ph.D. Dissertation Award of the Taiwan Fuzzy Systems Association” “Second Place” (A Study of -Cut Fuzzy Arithmetic Simplifying Rules, Fuzzy Weighted Average and Fuzzy Function Optimization; supervise Ph.D. student K.-C. Hung)

“The 2006 Master Thesis Award of the Chinese Institute of Industrial Engineers” “Excellence” (A Study of Multi-objective Parallel-machine Job Shop Rescheduling; supervise M.S. student G.-C. Pan)

“The 2006 Graduate Thesis Award of the Chinese Institute of Decision Sciences” “Second Place” (A Research of Analysis of Multi-generation Product Diffusion Pricing Model; supervise M.S. student S.-C. Chen)

“The 2005 Master Thesis Award of the Operations Research Society of Taiwan” “Honorable Mention” (A Research of Parallel Neural Network Power Load Forecasting System Modeling; supervise M.S. student C.-C. Huang)

Ping-Teng Chang

“The 2004ING Management Master Thesis Award” “Honorable Mention” (A Study of Multi-objective Job-shop Parallel Machine SchedulingApplication of the Ant Colony Optimization Algorithm; supervise M.S. student C.-Z. Zhong)

“The 2002APIEMS Thesis Award” “First Place” (A Study of Collaborative SearchMulti-simplex Genetic Algorithm; supervise M.S. student H.-H. Lee)

“The 2002APIEMS Thesis Award” “Third Place” (Multilevel Proportional Lot-sizing and Scheduling ProblemA Model with Product Life Cycle, Cash Flow and Marketing Production Requirements; supervise M.S. student C.-T. Chen)

“The 2002National Management Master Theses Award”, Chinese Management Association “Honorable Mention” (Multilevel Proportional Lot-sizing and Scheduling ProblemA Model with Product Life Cycle, Cash Flow and Marketing Production Requirements; supervise M.S. student C.-T. Chen)

“The 1999National Management Master Theses Award”, Chinese Management Association “Excellent Thesis in General Management” (Product Life Cycle Strategic Forecasting System; supervise M.S. student C.- H. Chang)

“The 1998Twelfth Dragon Thesis Award”, Acer Foundation “HonorableMention” (Fuzzy Message Requirement Classifier System: A Case Study of IC Test Machine Diagnosis Problem; supervise M.S. student C.-H. Liu)

“The 1996Tenth Dragon Thesis Award”, Acer Foundation “Honorable Mention” (Fuzzy Dynamic Equipment Replacement Programming; supervise M.S. student C.-T. Wang)

“The 1995National Management Master Theses Award”, Chinese Management Association “Honorable Mention” (A Study of Application of Fuzzy Delphi Method to Product Portfolio: A Case Study of Yieh Loong Group; co-supervise M.S. student D.-C. Lee)

NSC - “2000 Research Prize” -First Class (An Integrated Artificial Intelligent Computer-aided Process Planning System)

NSC - “1999 Research Prize” -First Class (Fuzzy Decision Networks and Deconvolution)

NSC - “1998 Research Prize” -First Class (The Fuzzy Delphi Method via Fuzzy Statistics and Membership Function Fitting and an Application to the Human Resources)

NSC - “1997 Research Prize” -First Class (Fuzzy Part Coding for Group Technology)

NSC - “1996 Research Prize” -First Class(Fuzzy Seasonality Forecasting)

NSC - “1995 Research Prize” -First Class(Fuzzy Regression Analysis)

Ping-Teng Chang

INDUSTRIAL EXPERIENCES

1987 1988 Associate Manager / Quality Control Dept., Associate Manager / Engineering Dept., Lite-On Inc. (PCB manufactures) (Develop multi-layer PCB production, strengthen functions of Lab, plan and organize quality plan, education and training. Raise the production percentage of multi-layer PCB from 5% to 30%.)

1983 1987 Supervisor and Chief Quality Engineer / QC Dept., Supervisor / Manufacturing Dept., Process Engineer / Engineering Dept., Ko Sheng Enterprises Co., Ltd. (PCB manufactures)

EDUCATION

Ph.D. Industrial Engineering – 1994, Kansas State University (Chairperson: Dr. E. Stanley Lee; Dissertation Title: Fuzzy Regression Analysis)

M.S. Industrial Engineering – 1990, Kansas State University (Chairperson: Dr. Stephan A. Konz)

Chemical Engineering – 1981, National Taipei Institute of Technology

AREAS OF RESEARCH AND TEACHING

RESEARCH Production Management and Manufacturing Planning and Control Systems (Flexible Manufacturing Systems, Group Technology, Computer-Aided Process Planning, etc.)

Supply Chain Management (Multi-site Production Planning) Fuzzy Set Theory (fuzzy Arithmetic, Fuzzy Ranking, Fuzzy Regression, Fuzzy Multiple Criteria Decision Making, Fuzzy Decision Networks, Fuzzy Delphi Method, Fuzzy Analytic Hierarchy Process, Fuzzy Classifiers System, Fuzzy System Dynamics, Fuzzy Structural Equation Modeling, etc., and Applications)

Intelligent Algorithms (Genetic Algorithms, Ant Colony Optimization, Evolutionary Algorithms, Tabu Search, Simulated Annealing, Harmony Search, Hybrids, etc., and Applications)

Forecasting and Product Life Cycle Modeling (Fuzzy Forecasting, PLC Models)

Scheduling Theory (Various Shop Scheduling, Parallel-machine Scheduling, Rescheduling, Multi-objective Scheduling, etc.)

Inventory Models (Various Inventory/Lot-sizing Models)

TEACHING

Ping-Teng Chang

Work Study (Undergraduate) Facility Layout (Undergraduate) Production and Operations Management (Undergraduate, Graduate)

Automated Production Systems (Undergraduate) Operations Research and Artificial Intelligence (Undergraduate) Engineering Economics (Undergraduate) Mathematical Programming (Graduate) Decision Making (Graduate) Decision Support Systems (Graduate) Fuzzy Set Theory and Applications (Graduate)

RESEARCH

REFEREED JOURNAL ARTICLES

Chang, P.-T. and Lee, J.-H., 2010, “A Fuzzy DEA and Knapsack Formulation Integrated Model for Project Selection,” Computers & Operations Research, in print. doi:10.1016/j.cor.2010.10.021 [SCI, EI] (NSC 98-2221-E-029-007-MY3)

Chang, P.-T., Lin, C.-S., Hung, K.-C., Lee, H.-H., and Chang, C.-H., 2010, “Collaboration and Competition Process: A Multi-Teams and Genetic Algorithm Hybrid Approach,” International Journal of Artificial Life Research, Vol. 1, No. 3, pp. 62–90. (NSC 90-2218-E-029-009)

Pai, P.-F., Lin, K.-P., Lin, C.-S., and Chang, P.-T., 2010, “Time Series Forecasting by a Seasonal Support Vector Regression Model,” Expert Systems with Applications, Vol. 37, Issue 6, June, pp. 4261-4265. [SCI]

Lin, K.-P., Chang, P.-T., Hung, K.-C., and Pai, P.-F., 2010, “A Simulation of Vendor Managed Inventory Dynamics Using Fuzzy Arithmetic Operations with Genetic Algorithms,” Expert Systems with Applications, Vol. 37, Issue 3, March, pp. 2571-2579. [SCI] (NSC 97-2410-H-262 -006)

Chang, P.-T., Lin, K.-P., Lin, C.-S., Hung, K.-C., Hung, L.-T., and Hsu, B.-D., 2009, “Developing a Fuzzy Bicluster Regression to Estimate Heat Tolerance in Plants by Chlorophyll Fluorescence,” IEEE Transactions on Fuzzy Systems, Vol. 17, No. 3, June, pp. 485–504. [SCI, EI] (NSC 94-2213-E-029-008)

Pai, P.-F., Yang, S.-L., and Chang, P.-T., 2009, “Forecasting Output of Integrated Circuit Industry by Support Vector Regression Models with Marriage Honey-bees Optimization Algorithms,” Expert Systems with Applications, Vol. 36, pp. 10746–10751. [SCI] (NSC 96-2628-E-260-001-MY3)

Chang, P.-T., Lee, J.-H., Hung, K.-C., Tsai, J.-T., and Perng, C., 2009, “Applying Fuzzy Weighted Average Approach to Evaluate Office Layouts with Feng-Shui Consideration,” Mathematical and Computer Modelling, Vol. 50, No. 9-10, November, pp. 1514–1537. [SCI, EI]

Ping-Teng Chang

Chang, P.-T., Lin, K.-P., Pai, P.-F., Zhong, C.-Z., Lin, C.-H., and Hung, L.-T., 2008, “Ant Colony Optimization System for a Multi-quantitative and Qualitative Objective Job-shop Parallel-machine-scheduling Problem,” International Journal ofProduction Research, Vol. 46, No. 20, October, pp. 5719–5759. [SCI, EI] (NSC 92-2213-E-029-007)

Perng, C., Chang, P.-T., Lin, S.-S., Huang, C.-C., and Ho, Z.-P., 2008, “Optimizing Multi-Site Production Planning and Scheduling with a Hybrid Genetic Algorithm,” International Journal of Management Theory and Practices, Vol. 9, No. 1, August, pp. 5–20.

Pai, P.-F., Lin, K.-P., and Chang, P.-T., 2007, “Potential Assessment of an Ellipsoidal Neural Fuzzy Time Series Model for Freeway Traffic Prediction,” Lecture Notes in Computer Sciences, Vol. 4431, pp. 631–639. [SCI]

Chang, P.-T., Hung, K.-C., Lin, K.-P., and Chang, C.-H., 2006, “A Comparison of Discrete Algorithms for Fuzzy Weighted Average,” IEEE Transactions on FuzzySystems, Vol. 14, No. 5, pp. 663-675. [SCI, EI] (NSC 91-2213-E-029-018)

Chang, P.-T. and Hung, K.-C., 2006, “-Cut Fuzzy Arithmetic: Simplifying Rules and a Fuzzy Function Optimization with a Decision Variable,” IEEE Transactionson Fuzzy Systems, Vol. 14, No. 4, pp. 496-510. [SCI, EI] (NSC 91-2213-E-029-018)

Chang, P.-T., Pai, P.-F., Lin, K.-P., and Wu, M.-S., 2006, “Applying Fuzzy Arithmetic to System Dynamics for the Customer-Producer-Employment Model,” International Journal of Systems Science, Vol. 37, No. 10, pp. 673-698. [SCI, EI] (NSC 91-2213-E-029-018)

Chang, P.-T. and Chang, C.-H., 2006, “An Elaborative Unit Cost Structure-based Fuzzy Economic Production Quantity Model,” Mathematical and ComputerModelling, Vol. 43, pp.1337-1356. [SCI, EI]

Chang, P.-T., Yao, M.-J., Huang, S.-F., and Chen, C.-T., 2006, “A Genetic Algorithm for Solving a Fuzzy Economic Lot-size Scheduling Problem,” International Journalof Production Economics, Vol. 102, pp. 265-288. [SCI, EI] (NSC 90-2218-E-029-008, NSC 90-2218-E-029-009)

Pai, P.-F., Hong, W.-C., Chang, P.-T., and Chen, C.-T., 2006, “The Application of Support Vector Machines to Forecast Tourist Arrivals in Barbados: An Empirical Study,” International Journal of Management, Vol. 23, pp. 375-385. (NSC 92-2213-E-212-001, NSC 93-2213-E-212-001)

Hong, W.-C., Pai, P.-F., Chen, C.-T., and Chang, P.-T., 2005, “Recurrent Support Vector Machines in Reliability Prediction,” Lecture Notes in Computer Sciences, Vol. 3610, pp. 619-629. [SCI] (NSC 92-2213-E-212-001, NSC 93-2213-E-212-001)

Chang, P.-T. and Hung, K.-C., 2005, “Applying the Fuzzy-Weighted-Average Approach to Evaluate Network Security Systems,” Computers and Mathematicswith Applications, Vol. 29, pp. 1797-1814. [SCI, EI]

Ping-Teng Chang

Yao, M.-J., Chang, P.-T., and Huang, S.-F., 2005, “On the Economic Lot Scheduling Problem with Fuzzy Demands,” International Journal of Operations Research, Vol. 2, No. 2, pp. 58-71. (NSC 89-2213-E-029-029)

Pai, P.-F., Chang, P.-T., Lin, K.-P., and Hong, W.-C., 2005, “Hybrid Learning Fuzzy Neural Models in Stock Price Forecasting,” Journal of Information & OptimizationSciences, Vol. 26, No. 3, pp. 495-508. [EI]

Pai, P.-F., Chang, P.-T., and Lee, S.-Y., 2005, “Part-machine Family Formation Using Genetic Algorithms in a Fuzzy Environment,” International Journal ofAdvanced Manufacturing Technology, Vol. 25, No. 11-12, pp. 1175-1179. [SCI, EI] (NSC 92-2213-E-212-001)

Chang, P.-T., 2005, “Fuzzy Strategic Replacement Analysis,” European Journal ofOperational Research, Vol. 160, pp. 532-559. [SCI, EI] (NSC 86-2213-E-029-009)

Chang, P.-T., Chang, C.-H., and Chen, C.-T., 2004, “An Extension of the Multi-machine Multi-level Proportional Lot Sizing and Scheduling Model for Product-life-cycle Demands,” International Journal of Operations Research, Vol. 1, pp. 11-22. (NSC 90-2218-E-029-009)

Pai, P.-F., Chang, P.-T., Wang, S.-S., and Lin, K.-P., 2004, “A Fuzzy Logic-based Approach in Capacity-planning Problems,” International Journal of AdvancedManufacturing Technology, Vol. 23, pp. 806-811. [SCI, EI] (NSC91-2213-E-212-003)

Chang, P.-T. and Chang, C.-H., 2003, “A Stage Characteristic-Preserving Product Life Cycle Modeling,” Mathematical and Computer Modelling, Vol. 37, pp. 1259-1269. [SCI, EI] (NSC 89-2213-E-029-013)

Chang, P.-T., Liu, C.-H., Lo, Y.-T., and Szu, Y.-J., 2003, “Fuzzy Message Requirement Classifiers System and an Application to the IC Test Machine DiagnosticsI,” Journal of the Chinese Institute of Industrial Engineers, Vol. 20, No. 2, pp. 113-124. (2004 Paper Award of the Chinese Institute of Industrial Engineers) [EI] (NSC 88-2213-E-029-008)

Chang, P.-T., 2002, “Fuzzy Stage Characteristic-Preserving Product Life Cycle Modeling,” Fuzzy Sets and Systems, Vol. 126, pp. 33-47. [SCI, EI] (NSC 89-2213-E-029-013)

Chang, P.-T. and Lo, Y.-T., 2001, “Modeling of Job-Shop Scheduling with Multiple Quantitative and Qualitative Objectives and a GA/TS Mixture Approach,” International Journal of Computer Integrated Manufacturing, Vol. 14, pp. 367-384. [SCI, EI] (NSC 89-2213-E-029-012)

Huang, L.-C., Hsieh, S.-Y., and Chang P.-T., 2001, “A Comparison of Fuzzy Delphi Methods with an Application to Assessment Factor Selection for Bank Employees,” Journal of the Chinese Institute of Industrial Engineers, Vol. 18, pp. 74-86. [EI] (NSC 86-2416-H-214-001)

Ping-Teng Chang

Chang, P.-T., Chang, C.-H., and Jong, T.-P., 2001, “A Dynamic Unit Cost Based Economic Production Quantity Model with Fuzzy JIT Concept,” Journal of theChinese Institute of Industrial Engineers, Vol. 18, pp. 9-20. [EI]

Chang, P.-T., 2001, “A Study of a Two-Stage Fuzzy Multi-objective Hybrid Genetic Algorithm Job-Shop Scheduling System Approach,” Engineering & Applied ScienceLetters, No. 55, National Science Council of Taiwan, Engineering & Applied Science Division. (NSC 89-2213-E-029-012)

Chang, P.-T. and Chang, C.-H., 2000, “An Integrated Artificial Intelligent Computer-Aided Process Planning System,” International Journal of ComputerIntegrated Manufacturing, Vol. 13, pp. 483-497. [SCI, EI] (NSC 87-2213-E-029-009)

Chang, P.-T., Huang, L.-C., and Lin, H.-J., 2000, “The Fuzzy Delphi Method via Fuzzy Statistics and Membership Function Fitting and an Application to the Human Resources,” Fuzzy Sets and Systems, Vol. 112, pp. 511-520. [SCI, EI] (NSC 86-2416-H-214-001)

Chang, P.-T. and Lee, E.S., 2000, “A Multi-Solution Method for Cell FormationExploring Practical Alternatives in Group Technology Manufacturing,” Computers and Mathematics with Applications, Vol. 40, pp. 1285-1296. [SCI, EI]

Chang, P.-T. and Lee, E.S., 1999, “Fuzzy Decision Networks and Deconvolution”, Computers and Mathematics with Applications, Vol. 37, pp. 53-63. [SCI, EI]

Chang, P.-T., 1997, “Fuzzy Seasonality Forecasting,” Fuzzy Sets and Systems, Vol. 90, pp. 1-10. [SCI, EI]

Huang, L.-C., Chang, P.-T., and Lin, H.-J., 1997, “The Fuzzy Managerial Talent Assessment Model,” Pan-Pacific Management Review, Vol. 1, pp. 71-83.

Ben-Arieh, D., Lee, E.S., and Chang, P.-T., 1996, “Fuzzy Part Coding for Group Technology,” European Journal of Operational Research, Vol. 92, pp. 637-648. [SCI, EI]

Chang, P.-T. and Lee, E.S., 1996, “A Generalized Fuzzy Weighted Least Squares Regression,” Fuzzy Sets and Systems, Vol. 82, pp. 289-298. [SCI, EI]

Chang, P.-T., Lee, E.S., and Konz, S.A., 1996, “Applying Fuzzy Linear Regression to VDT Legibility,” Fuzzy Sets and Systems, Vol. 80, pp. 197-204. [SCI, EI]

Chang, P.-T. and Lee, E.S., 1995, “The Estimation of Normalized Fuzzy Weights,” Computers and Mathematics with Applications, Vol. 29, pp. 21-42. [SCI, EI]

Chang, P.-T. and Lee, E.S., 1994, “Fuzzy Least Absolute Deviations Regression and the Conflicting Trends in Fuzzy Parameters,” Computers and Mathematics withApplications, Vol. 28, pp. 89-101. [SCI, EI]

Ping-Teng Chang

Chang, P.-T. and Lee, E.S., 1994, “Fuzzy Linear Regression with Spreads Unrestricted in Sign,” Computers and Mathematics with Applications, Vol. 28, pp. 61-70. [SCI, EI]

Chang, P.-T. and Lee, E.S., 1994, “Ranking of Fuzzy Sets based on the Concept of Existence,” Computers and Mathematics with Applications, Vol. 27, pp. 1-21. [SCI, EI]

Ben-Arieh, D. and Chang, P.-T., 1994, “An Extension of the p-median Group Technology Algorithm,” Computers & Operations Research, Vol. 21, pp. 119-125. [SCI, EI]

BOOK CHAPTER PAPERS

Chang, P.-T. and Lee, E.S., 1994, “Fuzzy Arithmetic and Comparison of Fuzzy Numbers,” in Fuzzy Optimization: Recent Advances, edited by M. Delgado et al., Omnitech Press.

Chang, P.-T. and Lee, E.S., 1993, “Fuzzy Decision Making: A Survey,” in BetweenMind and Computer: Fuzzy Science and Engineering, edited by P.Z. Wang and K.F. Loe, World Scientific Publishing, Singapore, pp. 139-182.

Chang, P.-T. and Konz, S., 1993, “Character Size vs Viewing Distance on VDTs,” in Work with Display Units 92, edited by H. Luczak, A. Cakir and G. Cakir, Elsevier, pp. 143-147.

PAPERS UNDER REVIEW

Lee, J.-H. and Chang, P.-T., 2010, “A Trigonometry-directed Adaptive Penalty Approach for Constrained Evolutionary Optimization,” submitted to Journal ofGlobal Optimization.

Lee, J.-H. and Chang, P.-T., 2010, “A Survey and Numerical Comparison of Factor-free Penalty Function Constraint Handling Techniques in Genetic Algorithms,” submitted to Expert Systems with Applications.

(Book under preparation) Chang, P.-T. (Editor), 2011, Fuzzy Methodologies andtheir Applications. (in English)

CONFERENCE PROCEEDINGS PAPERS

Chang, P.-T., Zeng, P.-S., and Wu, S.-X., 2011, “Research of Relationship Framework among Corporate Social Responsibility, Other Influential Factors and Organizational Performance,” 2011 Conference on Industry Innovation and Technology Management, Pingtung, Taiwan, January 21, pp. 451- 463.

Ping-Teng Chang

Chang, P.-T., Yang, S.-Y., and Lin, S.-R., 2011, “Research of Target Costing System Thinking Combined with Target Marketing, Product Life Cycle and Consumer Behaviors,” 2011 Conference on Industry Innovation and Technology Management, Pingtung, Taiwan, January 21, pp. 123-135.

Chang, P.-T., Tseng, T.-Y., Li, Y.-L., and Lin, Y.-H., 2009, “Protein Clustering with Mixed Structure and Application of Fuzzy Set Theory,” The 17th National Conference on Fuzzy Theory and Its Application, Kaohsiung, Taiwan, December 18.

Chang, P.-T., Wang, W.-C., Chiu, Y.-T., and Chien, H.-S., 2009, “Study of Brand Development based on Life Cycle Prospective,” 2009 Annual Meeting of Chinese Institute of Industrial Engineers, Taichung, Taiwan, December 12.

Chang, P.-T., Wang, W.-C., Chen, X.-Y., and Huang, H.-H., 2009, “Study of Structure Analysis of Yield Management System－A Case Study of Airlines Industry,” 2009 Annual Meeting of Chinese Institute of Industrial Engineers, Taichung, Taiwan, December 12.

Chang, P.-T., Liu, C.-T., and Huang, Y.-Y., 2009, “Study of Capital and Technology Investment Strategy-Applying System Dynamics and a Case Study of Wafer Fabrication Factory,” The 6th Annual Conference of Operations Research Society of Taiwan 2009, Hsinchu, Taiwan, November 5.

Chang, P.-T., Tseng, T.-Y., Chung, W.-C., and Huang, C.-C., 2009, “Study of Real Function Problem Solution of MBO,” The 6th Annual Conference of Operations Research Society of Taiwan 2009, Hsinchu, Taiwan, November 5.

Chang, P.-T., Wu, J.-S., and Tsai, C.-C., 2008, “System Dynamics Applied in Capacity and Demand BalancingA Case Study of Wafer Fabrication Factory,” The 16th National Conference on Fuzzy Theory and Its Applications, Chung Li, Taiwan, December 20.

Pai, P.-F., Yang, S.-L., Huang, C.-C., and Chang, P.-T., 2008, “Application of Ontology and Directed Acyclic Graph Support Vector Machine in Patent Classification,” 2008 Annual Meeting of Chinese Institute of Industrial Engineers, Chung Li, Taiwan, December 13.

Chang, P.-T., Hsieh, M.-Y., and Tseng, P.-S., 2008, “An Origin-Destination Fare Differentiation and Discount Model by Example of Taiwan High-Speed Rail,” 2008 Annual Meeting of Chinese Institute of Industrial Engineers, Chung Li, Taiwan, December 13.

Chang, P.-T., Chang, C.-H., and Yang, S.-I., 2008, “A Study of DVD Diskette Malfunction Monitoring,” 2008 Annual Meeting of Chinese Institute of Industrial Engineers, Chung Li, Taiwan, December 13.

Chang, P.-T., Yang, W.-Y., and Tu, M.-F., 2008, “A Study of Fuzzy Set Theory in Triangulation Position Estimation–for Zigbee,” 2008 Workshop on Consumer Electronics, Taipei, Taiwan, December 5.

Ping-Teng Chang

Chang, P.-T., Chen, C.-Y., and Chen, C.-Y., 2008, “A Study of Multi-Site Production Assignment and Scheduling System with Order Contributivity Considered Multi-Objectives,” The 13th Conference on Artificial Intelligence and Applications, Ilan, Taiwan, November 21.

Chang, P.-T., Chen, J.-Y., and Chen, S.-Y., 2008, “A Study of Fuzzy Game Theory Applied in Selection of Competition Strategy for High-Speed Rail, Railway, and Air lines,” 2008 Ninth Conference on Sustaining Development Management, Pingtung, Taiwan, April 25.

Chang, P.-T., Kung, C.-M., and Liu, G.-T., 2008, “A Study of System Dynamics Applied in Production Control and Capacity Planning of Wafer Fabrication–The Case Study of Back-End-of-the-Line,” 2008 Ninth Conference on Sustaining Development Management, Pingtung, Taiwan, April 25.

Chang, P.-T., Ku, C.-C., and Lee, Y.-L., 2007, “A Study of Orthogonal Quasi-Gradient Search Algorithm,” The 12th Conference on Artificial Intelligence and Applications, Yunlin, Taiwan, November 16-17.

Chang, P.-T. and Lin, K.-P., 2007, “Study of Fuzzy Arithmetic and Fuzziness Accumulation Controlling Method for System Dynamics with Fuzzy Arithmetic,” Fourth Conference of Operations Research Society of Taiwan and 2007 Operations Research Theory and Practice Conference, Hualien, Taiwan, October 26-27.

Chang, P.-T., Chiang, H.-C., and Chiu, Y.-T., 2007, “A Study of Repeated Purchase and Innovation Diffusion for Multi-generation Products,” Fourth Conference of Operations Research Society of Taiwan and 2007 Operations Research Theory and Practice Conference, Hualien, Taiwan, October 26-27.

Chang, P.-T., Juan, Y.-C., and Chuang, W.-C., 2007, “A Study of Multi-objective and TOC Driven Job-shop Production Scheduling,” Fourth Conference of Operations Research Society of Taiwan and 2007 Operations Research Theory and Practice Conference, Hualien, Taiwan, October 26-27.

Perng, C., Chang, P.-T., Ho, Z.-P., and Huang, C.-C., 2007, “Optimization of Multi-site Integrated Production Assignment and Scheduling System,” ACME Transactions, Las Vegas, Nevada, USA, July 12-14, pp. C39_34-C.39_41.

Chang, P.-T., Chen, S.-C., and Shie, M.-Y., 2006, “A Study of Analysis of Multi-generation Product Diffusion Pricing Models for DRAM,” 2006 Annual Meeting of Chinese Institute of Industrial Engineers, Taichung, Taiwan., December 23.

Chang, P.-T., Pan, G.-C., and Wu, J.-S., 2006, “A Study of Multi-objective Parallel-machine Job Shop Rescheduling,” 2006 Annual Meeting of Chinese Institute of Industrial Engineers, Taichung, Taiwan, December 23.

Chang, P.-T., Shyue, D.-H., and Wu, J.-S., 2006, “A GA/Tabu Search for Multiple Sequence Alignment in Computational Biology,” The 3rd Annual Conference of Operations Research Society of Taiwan 2006, Nei-Li, Taiwan, November 18.

Ping-Teng Chang

Chang, P.-T., Chen, S.-C., and Chang, C.-H., 2006, “A Study of Analysis of Multi-generation Product Diffusion Pricing Models for CPU,” The 3rd Annual Conference of Operations Research Society of Taiwan 2006, Nei-Li, Taiwan, November 18.

Chang, P.-T., Guo, J.-S., and Chen, J.-Y., 2006, “An Orthogonal Harmony Search for Function Optimization,” The 11th Conference on Artificial Intelligence and Applications, Kaohsiung, Taiwan, December 15-16.

Hong, W.-C., Yang, S.-L., Pai, P.-F., and Chang, P.-T., 2006, “Combining Meta-heuristic and Support Vector Machines in Predicting the Protein Structure,” 2006 Int'l Conference on New Global Management Environment, Changhua, Taiwan, September 21.

Chang, P.-T., Hung, L.-T., Lin, K.-P., Lin, C.-S., and Hung, K.-C., 2006, “Protein Sequence Alignment based on Fuzzy Arithmetic and Genetic Algorithm,” FUZZ-IEEE 2006, Vancouver, Canada, September 7-9. [EI] (NSC 94-2213-E-029-008)

Chang, P.-T., Perng, C., Huang, C.-C., and Chen, C.-Y., 2005, “Optimization of Multi-site Integrated Production Assignment and Scheduling System,” 2005 Annual Meeting of Chinese Institute of Industrial Engineers, Hsinchu, Taiwan, December 17. (NSC 93-2213-E-029-004)

Chang, P.-T., Lee, W.-S., and Ku, C.-C., 2005, “Application of Duopoly Game Theory to the Pricing of Diffusion Model for Multi-generations Products–DRAM Products as an Example,” 2005 Annual Meeting of Chinese Institute of Industrial Engineers, Hsinchu, Taiwan, December 17. (NSC 93-2213-E-029-005)

Chang, P.-T., Cheng T.-J., Lin, K.-P., and Gung, C.-M., 2005, “Application of Fuzzy Set Theory and Hybrid Genetic Algorithm to Gene Sequence Alignment Problems,” The 13th National Conference on Fuzzy Theory and Its Applications, Kaohsiung, Taiwan, September 30.

Chang, P.-T., Kuo, W.-W., and Hong, L.-T., 2005, “Quasi Gradient Search Evolution Strategy Method,” The 10th Conference on Artificial Intelligence and Applications, Kaohsiung, Taiwan, December 2-3.

Chang, P.-T., Huang, J.-C., Hung, K.-C., Lin, K.-P., and Juan, Y.-C., 2005, “Study of Power Load Forecasting System Modeling with a Parallel Neural Network,” The 2nd Annual Conference of Operations Research Society of Taiwan 2005, Taipai, Taiwan, November 4.

Chang, P.-T., Lin, J.-J., Hong, L.-T., and Kuo, C.-H., 2005, “Diffusion-modeled Multi-generation Product Pricing and Advertisement Budgeting System,” 2005 Conference on Management Innovation and New Vision, Taipei, Taiwan, May 13. (NSC 92-2213-E-029-005)

Chang, P.-T. and Hung, K.-C., 2004, “A High Efficient Algorithm for Fuzzy Weighted Average,” The Fifth Asia-Pacific Industrial Engineering and Management Systems Conference & The Seventh Asia-Pacific Division Meeting of

Ping-Teng Chang

the International Foundation of Production Research, Queensland, Australia, December 12-15.

Chang, P.-T., Lin, K.-P., and Pai, P.-F., 2004, “Hybrid Learning Fuzzy Neural Models in Forecasting Engine System Reliability,” The Fifth Asia-Pacific Industrial Engineering and Management Systems Conference & The Seventh Asia-Pacific Division Meeting of the International Foundation of Production Research, Queensland, Australia, December 12-15.

Chang, P.-T., Zhong, C.-Z., Hung, K.-C., and Hung, L.-T., 2004, “An ACO to Multi-objective Job-shop Parallel-machine Scheduling,” The Conference on Science and Management, Taipei, Taiwan, November 12. (NSC 92-2213-E-029-007)

Chang, P.-T. and Hung, K.-C., 2004, “A Study for Simplifying Rules of -cut Fuzzy Arithmetic,” The Conference on Science and Management, Taipei, Taiwan, November 12.

Pai, P.-F., Chang, P.-T., and Lin, C.-S., 2004, “Modified SVMs Model in Forecasting System,” The Twelfth National Conference on Fuzzy Theory and Its Applications, Ilan, Taiwan, November 12-13.

Chang, P.-T., Pai, P.-F., Lin, K.-P., and Wu, M.-S., 2004, “Applying Fuzzy Arithmetic to the System Dynamics for the Customer-producer-employment Model,” The Twelfth National Conference on Fuzzy Theory and Its Applications, Ilan, Taiwan, November 12-13.

Chang, P.-T., Chang, C.-H., Lee, H.-H., and Hung, K.-C., 2004, “A Hybrid Multi-simplexes Genetic Algorithms Method,” International Conference on Analysis and Its Applications, Changhua, Taiwan, May 28-30.

Chang, P.-T., Lin, Y.-W., and Huang, C.-C., 2003, “Aggressive Win-win Pricing Modeling for PLC-based Multi-generation products,” 2003 Annual Meeting of Chinese Institute of Industrial Engineers, Taiwan. (NSC 91-2213-E-029-009)

Chang, P.-T. and Chang, C.-H., 2003, “Finding Roots by Genetic Algorithm,” The Joint Conference on AI, Fuzzy System, and Grey System, Taipei, Taiwan, December 4-5.

Chang, P.-T., Lin, C.-H., and Kuo, W.-W., 2003, “Study of Modeling and System of Multistage Parallel Machine Job-shop Multi-objective Scheduling,” 2003 Annual Meeting of Chinese Institute of Industrial Engineers, Taiwan. (NSC 91-2213-E-029-018)

Chang, P.-T., Lee, H.-H., and Chang C.-H., 2003, “Cooperative Search,” Fourth International Conference on Operations and Quantitative Management (ICOQM), Taiwan.

Chang, P.-T., Chang, C.-H., and Liao, C.-W., 2003, “A Preceding Collaborative Forecasting Architecture and Implement System Study,” 2003 International Conference on Electronic Business Management, Taichung, Taiwan, July 12, No. 108.

Ping-Teng Chang

Chang, P.-T., Chang, C.-H., and Wu, M.-C, 2002, “Product Life Cycle based Collaborative Product Design System with IC Industrial Application,” 2002 1st Conference of Knowledge Management and Collaborative Planning, Taiwan, October 12, A104.

Chang, P.-T., Chen, C.-T., and Chang, C.-H., 2002, “University Campus Broadcast Application Case 3Tunghai Digital Village: Electronic Commercial Network,” 2002 Conference of Electronic Commerce and Digital Life, Taiwan, E050.

Chang, P.-T. and Chung, K.-C., 2001, “Supply-chain Production Assignment and Scheduling SystemA Cooperation Model based on Petri-net and Genetic Algorithm,” 2001 Annual Meeting of Chinese Institute of Industrial Engineers, Kaohsiung, Taiwan, December 8, A06-2.

Chang, P.-T. and Chen, C.-J., 2001, “Supply-chain Production Assignment and Planning SystemMulti-agent Cooperative-and-competitive Model and Fuzzy Integrated Evaluation Mechanism,” The Ninth National Conference on Fuzzy Theory and Its Applications, Chungli, Taiwan, November 23-34, p. 89. (NSC 89-2213-E-029-031)

Chang, P.-T. and Chang, C.-H., 2001, “An Elaborative Unit Cost Structure-based Fuzzy Economic Production Quantity Model,” OR 43 Annual Conference, Bath, UK, September 4-6. (NSC 89-2213-E-029-031)

Chang, P.-T., 2000, “A Fuzzy Product Life Cycle Modeling with Stage Characteristic-preserving Capability,” The Third Asia-Pacific Conference on Industrial Engineering and Management Systems, APIEMS’2000, Hong Kong, December 20-22, pp. 184-189.

Chang, P.-T., Pai, P.-F., and Chuang, H.-W., 2000, “Flexible Multiple Criteria Group Technology and Cellular Manufacturing Scheduling System,” International Workshop on Intelligent Systems Resolutions, The 8th Bellman Continuum, Hsinchu, Taiwan, December 11-12, pp. 40-43.

Chang, P.-T., Lo, Y.-T., and Chang, C.-H., 2000, “A GA/TS Method for Job-shop Scheduling with Multiple Qualitative and Quantitative Objectives and Fuzzy Data,” International Workshop on Intelligent Systems Resolutions, The 8th Bellman Continuum, Hsinchu, Taiwan, December 11-12, pp. 301-306.

Chang, P.-T. and Chang, C.-H., 2000, “A Product Life Cycle Modeling with Stage Characteristic-preserving Capability,” The 5th Annual International Conference of Industrial Engineering Theory, Applications & Practice, Hsinchu, Taiwan, December 13-15.

Chang, P.-T., Pai, P.-F., Hsio, J.E., and Hong, J.-C., 2000, “A Decision Support System for Cellular Manufacturing Systems Considering Seasonal Factors,” The Conference of Decision Analysis Approaches and Applications, Taipei, May, pp. 419-438.

Ping-Teng Chang

Chang, P.-T. and Kuo, C.-C., 2000, “Overall Diffusion and Neural Network Product-life-cycle Models,” Fifth Conference on Artificial Intelligence and Applications, Taipei, Taiwan, November 17, pp. 255-262.

Chang, P.-T., Hsieh, C.-F., and Hsiao, C.-A., 1999, “Design and Implementation of an Integrated Multi-stage Dynamic Cellular Manufacturing System,” 1999 Annual Meeting of Chinese Institute of Industrial Engineers, Taiwan, p. 169.

Chang, P.-T. and Jong, T.-P., 1999, “A Study of Dynamic Feedback Analysis Forecasting System,” 1999 Annual Meeting of Chinese Institute of Industrial Engineers, Taiwan, p. 249.

Chang, P.-T. and Chang, C.-H., 1999, “Strategic Product Life Cycle Forecasting System,” 1999 Annual Meeting of Chinese Institute of Industrial Engineers, Taiwan, p. 301.

Chang, P.-T., 1999, “Fuzzy Strategic Replacement Analysis,” Eighth International Fuzzy Systems Association World Congress, Taipei, Taiwan, August 16-20, pp. 833-837.

Chang, P.-T. and Lo, Y.-T., 1999, “A Study of Fuzzy Multi-objective Hybrid Genetic Algorithm Job-shop Scheduling System Approach,” The 1999 Conference on Production Scheduling: Theory and its Applications, Hsinchu, Taiwan, June 25, pp. A-39-A-46.

Chang, P.-T., Liu, C.-H., and Lo, Y.-T., 1998, “Fuzzy Message Requirement Classifier System: A Case Study of IC Test Machine Diagnosis Problem,” 1998 Annual Meeting of Chinese Institute of Industrial Engineers, Taiwan, pp. 691-696.

Chang, P.-T., Chang, C.-H., and Jong, T.-P., 1998, “An Integrated Dynamic Adaptive-learning Artificial Intelligent Computer-aided Process Planning System,” 1998 Annual Meeting of Chinese Institute of Industrial Engineers, Taiwan, pp. 181-186.

Chang, P.-T., Chang, C.-H., and Jong, T.-P., 1998, “A Dynamic Unit Cost based Economic Production Quantity Model with Fuzzy JIT Concept,” 1998 Annual Meeting of Chinese Institute of Industrial Engineers, Taiwan, pp. 52-57.

Chang, P.-T., Chuang, H.-W., and Hsieh, C.-F., 1998, “Flexible Multi-grouping and Multi-criteria Group Technology and Cellular Manufacturing Scheduling System,” Sixth National Conference on Fuzzy Theory and Its Applications, Taiwan, p. 13.

Huang, L.-C., Chang, P.-T., and Chen, Y.-J., 1998, “A Study of Importance Level Perception of Promotion Indices of Performance by Employer and EmployeeA Case Study of Manufacturing Industry,” Conference on Technology and Applications of Quality & Management for Twenty First Century (1998), Taiwan, pp. 555-564.

Huang, L.-C., Chang, P.-T., and Chen, Y.-J., 1997, “A Study of Fuzzy Theory Applied to Selection of Corporate Managerial Talent,” Fifth National Conference on Fuzzy Theory and Its Applications, Taiwan, pp. 185-190.

Ping-Teng Chang

Huang, L.-C., Chang, P.-T., and Hsieh, S.-Y., 1997, “Construction of Fuzzy Assessment Model for Bank Employee Recruitment and Case Comparison and Analysis,” 1997 Annual Meeting of Chinese Institute of Industrial Engineers, Taiwan, pp. 1006-1011.

Chang, P.-T. and Huang, L.-C., 1997, “The Fuzzy Delphi Method and Fuzzy Statistics,” 5th European Congress on Intelligent Techniques and Soft Computing, Aachen, Germany, September 8-11, pp. 168-172.

Huang, L.-C., Chang, P.-T., and Chen, Y.-J., 1997, “Fuzzy Theory Applied to Analysis of Employing Criteria of Manufacturing Industry Personnel,” Conference on Technology and Applications of Quality & Management for Twenty First Century, Taiwan, pp. 506-517.

Huang, L.-C., Chang, P.-T., and Hsieh, S.-Y., 1997, “A Study of Applying Fuzzy Delphi Method to Assessment Items of Bank Employee Recruitment,” Conference on Technology and Applications of Quality & Management for Twenty First Century, Taiwan, pp. 495-505.

Huang, L.-C., Chang, P.-T., and Lin, H.-J., 1996, “A Study of Fuzzy Assessment Model for Managerial Talent,” 1996 IEEE International Conference on Systems, Man and Cybernetics, Beijing, China, October 14-17, pp. 400-405.

Chang, P.-T. and Wang, C.-T., 1996, “Fuzzy Model for Replacement AnalysisA Pilot Study,” 1996 Annual Meeting of Chinese Institute of Industrial Engineers, Taiwan, pp. 121-128.

Huang, L.-C., Chang, P.-T., and Lin, H.-J., 1996, “Application of Fuzzy Delphi Method to Assessment Factor Analysis for Managerial Talent,” Conference on Technology and Applications of Quality & Management for Twenty First Century, Taiwan, pp. 393-402.

Chang, P.-T. and Lee, E.S., 1994, “Fuzzy Least Absolute Deviations Regression based on the Ranking of Fuzzy Numbers,” IEEE Conference on Fuzzy Systems at 1994 World Congress on Computational Intelligence, Orlando, Florida, June 26-29.

Lee, E.S. and Chang, P.-T., 1993, “Fuzzy Linear Regression with Conflicting Trends,” First Asian Fuzzy Systems Symposium, Singapore, November 23-26.

Chang, P.-T. and Konz, S., 1992, “Character Size vs. Viewing Distance on VDTs,” Work with Display Units ‘92, Third International Conference WWDU’92, Berlin, Germany.

Chang, P.-T., Ben-Arieh, D., and Lee, E.S., 1992, “Generation of Mechanical Assembly Sequences with Fuzzy Weights,” 1st Industrial Engineering Research Conference, Chicago, Illinois, May 20-21.

Chang, P.-T. and Lee, E.S., 1992, “Ranking of Fuzzy Numbers: Equal Existence Principle and Non-normalized Fuzzy Numbers,” TIMS/ORSA 33rd Joint National Meeting, Orlando, Florida, April 26-29.

Ping-Teng Chang

SPONSORED RESEARCH PROJECTS, NATIONAL SCIENCE COUNCIL OF TAIWAN

“Nonlinear and Fuzzy Earned Value Management & Multi-objective Multi-project Scheduling Model with Nonlinear Resource Consumptions” (NSC 98-2221-E-029-007-MY3) (2009/8 – 2012/7)

“Artificial Intelligent Integrated Yield Management System—Applied in the High Speed Rail (3/3)” (NSC 95-2221-E-029-003-MY3) (2008/8 – 2009/7)

“Artificial Intelligent Integrated Yield Management System—Applied in the High Speed Rail (2/3)” (NSC 95-2221-E-029-003-MY3) (2007/8 – 2008/7)

“Artificial Intelligent Integrated Yield Management System—Applied in the High Speed Rail (1/3)” (NSC 95-2221-E-029-003-MY3) (2006/8 – 2007/7)

“A Research of Applying Artificial Intelligence in Computational Molecular Biology (I)” (NSC 94-2213-E-029-008) (2005/8 – 2006/7)

“Innovative and Collaborative Value Chain Development Engineering for Taiwan IndustryCase Study of the Taiwan Precision Machinery IndustrySubproject 4: Collaborative Knowledge Management SystemStrategic Pricing System (3/3)” (NSC 93-2213-E-029-005) (2004/8 – 2005/7)

“Integrated Artificial Intelligent Supply Chain Order Assignment and Production Planning System(3/3)” (NSC 93-2213-E-029-004) (2004/8 – 2005/7)

“Innovative and Collaborative Value Chain Development Engineering for Taiwan IndustryCase Study of the Taiwan Precision Machinery IndustrySubproject 4: Collaborative Knowledge Management SystemStrategic Pricing System (2/3)” (NSC 92-2213-E-029-005) (2003/8 – 2004/7)

“Integrated Artificial Intelligent Supply Chain Order Assignment and Production Planning System (2/3)” (NSC 92-2213-E-029-007) (2003/8 – 2004/7)

“Innovative and Collaborative Value Chain Development Engineering for Taiwan IndustryCase Study of the Taiwan Precision Machinery IndustrySubproject 4: Collaborative Knowledge Management SystemStrategic Pricing System (1/3)” (NSC 91-2213-E-029-009) (2002/8 – 2003/7)

“Integrated Artificial Intelligent Supply Chain Order Assignment and Production Planning System (1/3)” (NSC 91-2213-E-029-018) (2002/8 – 2003/7)

“A Product Life Cycle-based Economic Multi-echelon Production Planning, Assignment and Inventory Management System (I)” (NSC 90-2218-E-029-009) (2001/8 – 2002/7)

“Strategic Product Life Cycle Forecasting System (3/3)” (NSC 90-2218-E-029-012) (2001/8 – 2002/7)

Ping-Teng Chang

“Multi-agent Fuzzy Multi-criteria Decision-making System of Multi-supply Chain” (NSC 89-2213-E-029-031) (2000/8 – 2001/7)

“Strategic Product Life Cycle Forecasting System (2/3)” (NSC 89-2213-E-029-035) (2000/8 – 2001/7)

“Study of Two-stage Fuzzy Multi-objective Hybrid Genetic Algorithm Job Shop Scheduling System Approach” (NSC 89-2213-E-029-012) (1999/8 – 2000/7)

“Strategic Product Life Cycle Forecasting System (1/3)” (NSC 89-2213-E-029-013) (1999/8 – 2000/7)

“Study of a Framework for Fuzzy Dynamic Flexible Manufacturing Systems Design & Implementation Planning” (NSC 88-2213-E-029-009) (1998/8 – 1999/7)

“Study of Classifier System Framework and Application with Fuzzy Dynamic Adaptive Learning and Reasoning” (NSC 88-2213-E-029-008) (1998/8 – 1999/7)

“Dynamic Sensor-neuron Combined Neural Network” (NSC 87-2213-E-029-009) (1997/8 – 1998/7)

“A Study of Fuzzy Assessment Model for Managerial Talent” (NSC 86-2416-H-214-001) (1996/8 – 1997/7)

“Fuzzy Dynamic Equipment Replacement Programming” (NSC 86-2213-E-029-009) (1996/8 – 1997/7)

“Analytical Approaches to the Group Technology Part Family/Machine Cell Formation Problem in Cellular Manufacturing” (NSC 85-2213-E-214-004) (1995/8 – 1996/7)

“Fuzzy Regression Analysis” (NSC 84-2213-E-214-015) (1995/2 – 1995/7)

SERVICE

INDUSTRIAL PROJECTS/CONSULTING AND REVIEW/PANEL ACTIVITIES

“Chip Conveyor Product Design and Production Technique Research and Development and R/D Management Assisting Tool Development Project” (2009 Ministry of Economic Affairs, Industrial Development Bureau, Industrial and Academic Joint Research Plan: Tunghai Univ. and Keyarrow (Taiwan) Co., Ltd.) (S09800226－093) (2009/4 - 2009/12)

“Survey of IT Firms’ Capacity” (for Corporate Synergy Development Center) (2007/10 - 2007/11)

“Process Flexibility and EfficiencyModularization and Project Management Planning and Analysis” (Kingroup Automation Industry Corp.) (2005/6 - 2006/5)

Ping-Teng Chang

“Pharmacy Department Reengineering” (Taichung Veterans General Hospital) (2005/3 - 2005/6)

“Intelligent Digital Health Net” (Show Chwan Health Care System) (2003/10 - 2004/9)

“Order Entry and Shipping Information System” (Liang Chi Hardware Works Co., Ltd.) (2001/1 - 2001/7, in cooperation with Pro-Max System Corp.)

Cooperative Project“Tunghai Digital Village” (with Mobitai Communications Corp.) (2000/7 - 2001/6, E-commerce net construction and operations design)

Cooperative Project“Exchange Network for Emergent Patient Records” (with Mobitai Communications Corp. and Taichung Veterans General Hospital) (1999/9 - 2000/5)

Cooperative Project“Business Knowledge Management” (with IBM Taiwan Corp.) (1999/5 - 2001/6, KM application with Lotus Notes and pricing knowledge system)

“Information System Construction” (Parfaite Tool Co., Ltd.) (1999/7 - 2001/1, order management, production control, inventory management, pricing, accounting system design consulting)

“Intelligent Delivery System” (Tait Marketing & Distribution Co., Ltd., Contract Distribution Services) (1999/9 - 2000/6)

“Operations Indices Analysis” (Genuine Co., Ltd. (Logistics)) (1999/9 - 2000/6)

“Process Streamline, Inventory and Operation Standardization Improvement” (Bliss Yih Enterprise Co., Ltd.) (1997/7 - 1998/1)

Project Proposal Reviewer and Panelist for the Ministry of Economic Affairs, Industrial Development Bureau (2007 - now)

Examiner for the Examination Yuan (2009 - now)

Member of Proposal Review Committee for the National Science Council, Industrial Engineering and Management Program (2008 - 2010)

Member of Advisory Committee for the Collaborative Commerce, Corporate Synergy Development Center (2008/7)

INVITED SPEECHES

National Tsing Hua University, Department of Industrial Engineering and Engineering Management, Taiwan “Fuzzy Cluster Regression Analysis”, December 8, 2010

Ping-Teng Chang

Cheng Shiu University, Department of Industrial Engineering and Management, Kaohsiung “Fuzzy Bi-cluster Regression”, October 14, 2009

National Kaohsiung First University of Science and Technology, College of Management, Graduate Institute of Management, Kaohsiung “Fuzzy Bi-cluster Regression”, November 23, 2007

Taichung Veterans General Hospital, Taichung “Industrial Engineering/Management and Thinking Methodologies Applied in Hospital Management”, June 19, 2006

Forum of Chinese Industrial Engineering and Hospitality Management Innovation, Tianjin, China “Process Reengineering of Hospital Clinic Pharmacy”, April 18 (April 18-19), 2006

Kingroup Automation Industry Corp., Taichung “Time Based Competition”, August 6, 2005

2005 National MBA Operations Management Course Meeting, Shanghai, China Keynote Speech: “Time Based Competition”, July 15 (July 14-16), 2005

The 13th Conference on National Defense Management and Practice, Taipei, Taiwan Panelist for “Forum of Applications of Operations Research in National Defense and Civilian Industries”, June 17, 2005

Ming Hsin University of Science and Technology, Graduate Institute of Engineering Management, Taiwan “Manufacturing Planning Systems, SCM and Search Methodology”, May 4, 2005

Nan Kai Institute of Technology, Department of Industrial Management, Taiwan “Intelligent Manufacturing Planning Systems, SCM & Cooperative Search”, January 13, 2003

National Tsing Hua University, Department of Industrial Engineering and Engineering Management, Taiwan “Intelligent Manufacturing Planning Systems, SCM & Cooperative Search”, May 8, 2002

Feng Chia University, Department of Industrial Engineering, Taichung “Intelligent Manufacturing Planning Systems”, May 28, 2001

Yuan-Ze University, Department of Industrial Engineering and Management, Taiwan “Intelligent Manufacturing Planning Systems”, June 8, 2000

I-Shou University, Department of Industrial Engineering and Management, Taiwan “A GA/TS Mixture Approach to Job Shop Scheduling with Multiple Quantitative & Qualitative Objectives”, December 23, 1999

Acer Inc. “Calm Production, Productivity & Flexibility Improvement”, January 28, 1999

Ping-Teng Chang

Choice Communications & Logistics Corp. “Logistics”, September 10, 11 and 14, 1998

Bliss Yih Enterprise Co., Ltd. “Process Streamline, Inventory & Operation Standardization Improvement”, July 1998

Chia-Yi Christian Hospital “Hospital Management & Reengineering”, November 14, 1997

Chinese Petroleum Corp., Kaohsiung Refinery “Theory & Practice of Work Process Simplification”, November 21, 1995

Yieh Loong Group “Production Management”, August 23-September 1, 1995

Yieh Loong Group “Practice of Managerial Implements”, August 24, 1995

CONFERENCE SERVICE

Co-General Chair, The 2006 Annual Meeting of Chinese Institute of Industrial Engineers, Taichung, December 23, 2006

General Chair, The 2005 Annual Meeting of Operations Research Society of Taiwan and INFORMS Taiwan Chapter and Operations Research and Applications Conference, Taipei, November 4, 2005

General Chair, The 2005 Workshop on Technology Management Application Software, Taiwan, May 28, 2005

Co-General Chair, The Workshop of NSC Industrial Engineering and Management Program: Innovative and Collaborative Value Chain Development Engineering for Taiwan Industry-Case Study of the Taiwan Precision Machinery Industry, Taiwan, March 5, 2005

General Chair, The First Operations Research Society of Taiwan Conference and 2004 Conference on Science and Management, Taipei, November 12, 2004

General Chair, The 2002 First Conference of Knowledge Management and Collaborative Planning, Taiwan, October 12, 2002

General Chair, The 2002 Collaborative Knowledge Management Workshop, Taiwan, March 9, 2002

General Chair, The 2002 Conference of Electronic Commerce and Digital Life, Taiwan, August 21, 2002

Program and Organizing Chair, The 1999 Meeting on Industrial Management and Competitiveness, Taiwan, July 3, 1999

Advisory Board/Organizing/Program Committee Members:

Ping-Teng Chang

Program Committee, The 14th Conference on Artificial Intelligence and Applications, Taichung, Taiwan, October 30-31, 2009 Advisory Board, The 2008 Annual Meeting of Chinese Institute of Industrial Engineers, Chung Li, Taiwan, December 13, 2008 Program Committee, The 13th Conference on Artificial Intelligence and Applications, Ilan, Taiwan, November 21-22, 2008 Program Committee, The 2007 National Computer Symposium, Taichung, Taiwan, December 20-21, 2007 Program Committee, The 12th Conference on Artificial Intelligence and Applications, Yunlin, Taiwan, November 16-17, 2007 Organizing Committee, The Fourth Conference of Operations Research Society of Taiwan and 2007 Operations Research Theory and Practice Conference, Hualien, Taiwan, October 26-27, 2007 Advisory Board, The 36th International Conference on Computers and Industrial Engineering, Taipei, June 20-23, 2006 Organizing Committee, The 10th Conference on Artificial Intelligence and Applications, Kaohsiung, Taiwan, December 2-3, 2005 Advisory Board, The 1st Conference on Product Reliability and Maintainability Practice, Changhua, Taiwan, November 18-19, 2004 Organizing Committee, The 4th International Conference on Operations and Quantitative Management (ICOQM), Tainan, Taiwan, 2003 Organizing Committee, The Ninth National Conference on Fuzzy Theory and Its Applications, Chung-Li, Taiwan, November 23-24, 2001 Organizing Committee, The 2001 Annual Meeting of Chinese Institute of Industrial Engineers, Kaohsiung, Taiwan, December 8, 2001 Organizing Committee, The Sixth National Conference on Fuzzy Theory and Its Applications, Taichung, Taiwan, December 4-5, 1998

Session Chairs: The 6th Annual Meeting and Conference of Operations Research Society of Taiwan, Taipei, June 5, 2010 The 2008 Annual Meeting of Chinese Institute of Industrial Engineers, Chung Li, Taiwan, December 13, 2008 The Fourth Conference of Operations Research Society of Taiwan and 2007 Operations Research Theory and Practice Conference, Hualien, Taiwan, October 26-27, 2007 The Annual Project Concluding Presentation of National Science Council, Industrial Engineering and Management Program, Taipei, November 12, 2005 The 1st Operations Research Society of Taiwan Conference and 2004 Conference on Science and Management, Taipei, November 12, 2004 The Ninth National Conference on Fuzzy Theory and Its Applications, Chung-Li, Taiwan, November 23-24, 2001 The 2001 Annual Meeting of Chinese Institute of Industrial Engineers, Kaohsiung, Taiwan, December 8, 2001 The International Workshop on Intelligent Systems Resolutions, the 8th Bellman Continuum, Hsinchu, Taiwan, December 11-12, 2000 The 5th Annual International Conference on Industrial EngineeringTheory, Applications & Practice, Hsinchu, Taiwan, December 13-15, 2000

Ping-Teng Chang

The 1999 Conference on Technology and Applications of Quality & Management for Twenty First Century, Kaohsiung, Taiwan, June 19, 1999 The Sixth National Conference on Fuzzy Theory and Its Applications, Taichung, Taiwan, December 4-5, 1998 The 1998 Annual Meeting of Chinese Institute of Industrial Engineers, Janghuah, Taiwan, December 13, 1998 The 5th European Congress on Intelligent Techniques and Soft Computing, Aachen, Germany, September 8-11, 1997

JOURNAL SERVICE

Editor-in-Chief International Journal of Artificial Life Research (IJALR), 2009/01 International Journal of Operations Research, 2004/11 2008/10

Referees/Reviewers OR Spectrum IEEE Transactions on Fuzzy Systems IEEE Transactions on Systems, Man and Cybernetics - Part B IEEE Transactions on Industrial Informatics Information Sciences International Journal of Production Research European Journal of Operational Research Fuzzy Sets and Systems International Journal of Production Economics Fuzzy Optimization and Decision Making International Journal of Operations and Quantitative Management International Journal of Systems Science Soft Computing and Automation Journal International Journal of Technology Management International Journal of Electronic Business Management International Journal of Information and Management Sciences International Journal of Fuzzy Systems Journal of the Chinese Institute of Industrial Engineers Decision Support Systems Water Resources Management Journal of Multiple-Valued Logic and Soft Computing International Journal of Modelling and Simulation International Journal of Computer Integrated Manufacturing Applied Mathematical Modelling PanPacific Management Review Journal of Information Science and Engineering Applied Computational Intelligence and Soft Computing Computers and Mathematics with Applications International Journal of Applied Science and Engineering International Journal of Approximate Reasoning Advances in Fuzzy Systems African Journal of Business Management Journal of Modelling in Management

Ping-Teng Chang

Computers & Operations Research