pilot pioneer datasheet v10 - dingli.com documents/pilot...tdd-lte vilte test is supported by htc m8...

Pilot Pioneer Datasheet

V10.0

Contents

Contents 1 What's New in Version 10.0 .................................................................................................. 1

2 Introduction ............................................................................................................................ 2

3 Main Features ......................................................................................................................... 3

4 New Supported Terminals .................................................................................................. 12

4.1 IPhone 6s/6s Plus ..................................................................................................... 12

4.2 Samsung Note5 N9200 ............................................................................................ 12

4.3 Nubia Z9 NX508J ...................................................................................................... 12

4.4 Nubia Z9 MAX NX510J ........................................................................................... 13

4.5 Nubia Z9 MAX NX518J ........................................................................................... 13

4.6 Qualcomm MTP 9640-NS ........................................................................................ 13

4.7 ZTE Blade Q Lux ...................................................................................................... 14

4.8 ZTE MF831 ................................................................................................................ 14

4.9 HUAWEI Mate7 TL09 .............................................................................................. 14

What's New in Version 10.0

1 © Dingli 27-09-2016 DL1100DS

1 What's New in Version 10.0 1. TDD-LTE ViLTE test is supported by HTC M8 in this version.

2. A new high-performance GPS device with greater sensitivity and faster positioning is

used for high-speed (approx. 300 km/h) train test.

3. Users may export the selected cell sites, test routes and cell line linkings to the Mapinfo,

Google Earth, and Shape file formats, which can be reused in other tools or platforms.

4. Users may select a cell or site to display its coverage map and cell line linkings for the

relevant analysis.

5. Users may define the type of signaling messages to collect based on the actual test and

analysis requirements.

Introduction

2 © Dingli 27-09-2016 DL1100DS

2 Introduction Pilot Pioneer is DingLi's multi-technology laptop-based radio access network test and

measurement tool. It is an integrated all-purpose product that can be used for indoor measurement

and in-vehicle outdoor drive testing. Various services tests can be conducted with a wide range of

the latest supported commercial test terminals. Pilot Pioneer test and measurement capability is

applicable throughout the network development lifecycle, therefore allowing network and service

provider to fully leverage on their investment. The collected data reflects subscriber's perceptions

and experience, enabling network operators to fine tune the network to maximize subscriber's

satisfaction.

Pilot Pioneer V10.0 is newly designed with simple and user-friendly interfaces for easy operation.

New functions are added or improved in this version：

ViLTE and VoLTE tests (with HTC M8)

WCDMA Adaptive Multi-Rate Wideband (AMR-WB) test

High-speed train test with GPS trajectory compensation

Export Map layers

Cell site coverage map

User-defined signaling message collection

Main Features

3 © Dingli 27-09-2016 DL1100DS

3 Main Features The main features of Pilot Pioneer are as below:

Supports multiple technologies, including 2G (GSM/GPRS/EDGE, CDMAIS95/1X), 3G

(TD-SCDMA, WCDMA, CDMA2000), HSDPA/HSUPA/HSPA+ and 4G (TDD/FDD

LTE)

Supports the common commercial cellphones/data cards and scanners

Supports genuine iOS iPhones e.g. iPhone 6/iPhone 6 Plus, iPhone 6s/iPhone 6s Plus

Supports voice quality evaluation tests (PESQ and POLQA)

Supports multiple test services: including indoor and outdoor voice call test s for GSM,

CDMA, UMTS, TD-SCDMA, and LTE; data service test for HSDPA/HSUPA/HSPA+

and LTE; and value-added service tests for all supported network technologies

Supports VOIP, CSFB, VoLTE service tests, and KPI statistics for LTE network

technology

Supports LTE 2CC CA test

Supports Global License Server (GLS) that allows customers to better manage license

distribution and usage according to project timeline

Supports data replay

The following table describes the Pilot Pioneer features list:

Function

Modules Description Details

System

Overview System Environment. Based on the Windows operating system.

Data

Collection

Supports multi-network data

collection

1. GSM (GPRS/EDGE)

2. CDMA, EVDO-Rel. 0/Rev. A/Rev. B

3. WCDMA/HSDPA/HSUPA/HSPA+

4. TD-SCDMA/HSDPA/HSUPA

5. LTE (VoLTE CA)

Supports data collection via

Pilot Pioneer test terminals

1. Support genuine iOS iPhones to conduct

service tests.

2. See Offered Devices.

Supports data collection via

Scanner

3. See Offered Devices.

4. Supports multi-network, simultaneous

scanner functions.

Supports GPS data collection

1. Supports NMEA0183 protocol-based USB

GPS/Bluetooth GPS.

2. Supports R&S (Rohde & Schwarz) and

PCTEL scanners' GPS function.

Main Features

4 © Dingli 27-09-2016 DL1100DS

Function


3. Supports high-performance GPS device

with greater sensitivity and faster

positioning for high-speed train test

Connect test mode

Connect test mode with a single click (After

users click Connect, Pilot Pioneer will detect

the test status immediately)

TCP/IP Sniffer Support TCP/IP Sniffer for data test

Recording test mode

1. Switches test modes between Connect and

Recording.

2. Inserts tags to all devices or a single device.

3. Supports log file swap.

GIS Support

Supports digital maps

MapInfo (*.Tab,*.Mif), ibwc (*.ibwc), Terrain

(*.TMB,*.TMD), AutoCAD (*.Dxf), USGS

(*.DEM), ArcInfo (*.Shp) formats

Supports scanned maps *.bmp, *.jpg, *.gif, *.tif, and *.tga formats

Displays Google maps in

real time

1. Supports online Google map or satellite

map in real time.

2. Supports Google Earth display.

Displays Bing maps in real

time Displays online Bing maps in real time.

Supports GPS measurement

route display

1. Real-time GPS-based measurement route

displayed on the Map window for each

network technology

2. GPS route only displayed in the Map

window

3. Parameter coverage map (including real

parameter values and duplicated parameter

values)

4. GPS compensation with Inertial

Navigation System

Positioning by longitude and

latitude

Supports orientation by longitude and latitude

and inserts tags at specific coordinates.

Supports distance

measurements

Measures the distance between any two random

points or multiple points.

Supports area measurements Measures area by square or polygon regions.

Controls base station display

on Map

1. Supports user-defined base station

information display: to display all base

station information or only display the cell

ID or name.

2. Supports user-defined base station icon,

color, and size.

Main Features

5 © Dingli 27-09-2016 DL1100DS

Function


Displays/searches base

station on the Map window

1. Searches and locates the base station.

2. Displays cell service information.

3. Displays neighbor cell information.

4. Displays multi-carriers information.

Cell Linking by selected

regions

Defines a map by regions (in circle, rectangle or

irregular shapes) to display cell line linking.

User-defined parameter

tracks and events

Displays user-defined parameter routes and

events simultaneously.

Displays track offset Selects any parameter to display the offset.

Supports cell line linking,

and distinguish main serving

cell and neighbor cells with

different colors

1. Supports single-point cell line linking to

distinguish the main serving cell and

neighbor cell.

2. Customizes cell line linking color, pattern,

and thickness.

3. Customizes warning distance.

4. Cell line linking by region.

5. Cell line linking by cell.

6. Cell line linking by log.

7. Cell site coverage map

Displays test information in

the floating window

1. Customizes content to be displayed in the

floating window.

2. Displays test parameter information in the

floating window.

3. Displays base station information in the

floating window.

Manages layers in the Map

window

1. Supports user-defined layer priority.

2. Shows/hides layers.

3. Customizes the legend display including

color, name, and transparency.

4. Supports layer offset.

5. Supports the label function for Map info.

6. Supports export of selected layers and test

routes

7. Supports export of map layers

Manage neighbor cells on

the Map Window

1. Checks neighbor cells relation

2. Adds or deletes neighbor cells

3. Exports neighbor cell relationship

4. Exports neighbor cell modified records

Main Features

6 © Dingli 27-09-2016 DL1100DS

Function


Project

Management

Generate test plans based

on test plan template after

adding devices

Generates test plans based on test plan

template after adding devices, and supports

user-defined test services

Save, save as, and close

projects Saves, saves as, and closes projects.

Save, open scenes Saves and opens customized scenes.

Save default parameter and

window Saves user-defined parameters and windows.

Save display and test plan

configuration along with

projects

Saves customized window display and test plan

configuration along with project.

Re-open and reuse a project Re-opens and reuses a project.

Automatically configure a

device port

1. Supports automatic device detection.

2. Automatically configure a device port once

a device is connected to Pilot Pioneer.

Test Services

MO-MT test Supports MO-MT test (MO/MT role would

rotate).

Loop test Enables customized loop test.

Voice test

1. Supports single/multiple terminal test.

2. Supports MO-MT test.

3. Supports PESQ, POLQA based voice

quality assessment test.

4. Supports mobile-to-land MOS test.

5. Controls reference file replay (including

pause and start) manually for MOS test

6. Supports multiple reference files replay

for MOS test

7. Supports AMR-WB MOS POLQA

Data test

1. Supports Ping, PPP, FTP Upload, FTP

Download, PBM, DNS Lookup, Facebook,

Trace Route, Speedtest, HTTP Download,

HTTP Page, HTTP Upload/Download,

Multi FTP, Email, etc.

2. Supports automatic file creation for FTP

Upload, HTTP Upload service test

template.

Value-added service test Supports SMS tests.

PBM service test Supports pulse-sampling bandwidth

measurement.

Main Features

7 © Dingli 27-09-2016 DL1100DS

Function


Video service test

1. Supports Video Telephony and Video

Streaming tests.

2. Supports LTE ViLTE test

Parallel test

1. Supports parallel tests for two or more

services, e.g. parallel tests of voice service

and data service.

2. Supports simultaneous tests of a single

test device with two chipsets, to achieve

simultaneous multi-network testing.

Scanner test

1. Supports Scanner data replay.

2. Supports Scanner Pilot, CW, Spectrum,

Blind, and EPS tests.

3. Supports Layer 3 message details.

LTE test Supports data test in LTE: VoLTE and CA tests.

Time synchronization

function

Synchronizes the time between the mobile

phone and server for mobile-to-land calls (for

both PESQ and POLQA mobile-to-land call).

TCP/IP Sniffer Supports TCP/IP Sniffer in Win XP/Win 7/8

(32/64 bit)

Force service test

1. 2G: Idle mode; 3G→2G: Stop test;

2G→3G: Start test

2. 3G: Idle mode; 4G→3G: Stop test;

3G→4G: Start test

Force test

1. Force to lock band or technology on

terminals.

2. Force cell reselection or handover.

Indoor Test

Supports indoor pin-point

tests

1. Supports user-defined pin-point test.

2. Supports predefined pin-point test.

Supports indoor maps Supports maps in the bmp, jpg, and gif formats.

Supports predefined floor

plans

1. Supports predefined floor plans.

2. Supports indoor test building management.

Users may import building information

by importing corresponding files, add

buildings and floors, and configure

building and floor information as

required.

Supports user-defined

parameters with different

coverage

Supports user-defined coverage parameters.

Main Features

8 © Dingli 27-09-2016 DL1100DS

Function


Supports abnormal event

display, such as dropped and

blocked calls

Supports icon display when abnormal events

occur.

Supports discrete parameter

value display

Supports discrete parameter value display (e.g.

BCCH, Cell ID, PCI, and UARFCN).

Outdoor Test

Supports GPS connection

and data collection

1. Supports real-time data collection and test

route display on the Map.

2. Supports GPS information collection via

multi-terminals based on one GPS.

3. Supports external Bluetooth GPS.

Supports base station import

1. Imports base station log files in the *.txt

format.

2. Supports automatic and manual log file

import.

3. Displays information about base station

name, sector name, PN, and scrambler.

4. Adds a base station into base station

database.

Supports abnormal event

displays, such as blocked

call, dropped call, etc.


occur.

Supports cell line linking

1. Cell line between the current test point and

serving cells

2. Cell line between the current test point and

neighbor cells

Window

Display

Supports Map window

Displays the longitude and latitude of the

sampling point, testing time, and covered

distance in real time.

Supports Table window

1. Displays the measurement samples’ time,

longitude, latitude, duplicated value, and

real value of a parameter.

2. Supports data filter by real parameter value

3. Able to copy one or multiple rows of data

from the Table

4. Supports statistics for selected parameters

in the Table window

Supports default windows

1. Supports default windows: Map, Message,

Event, and Line chart windows.

2. Customizes default window in Scene

Manager.

Main Features

9 © Dingli 27-09-2016 DL1100DS

Function


3. Supports cell information display through a

combined serving cell and neighbor cell

window for different technologies.

Real-time air interface

signaling display

Supports real-time air interface signaling

display.

Real-time test information

display

Supports test count, completed test count, and

test time display to control testing process.

Real-time test events display

Supports real-time display of key events during

testing, such as key events during call, and dial

establishment and disconnection in data service.

Real-time abnormal events

display


occur.

Real-time statistics of

indexes such as success rate,

time delay and rate

Supports real-time statistics of parameter

samplings and key event information.

Coverage display of multiple

parameters

Supports user-defined coverage display of multi

parameters.

User-defined status windows

and charts

1. Supports user-defined status window and

chart.

2. Adds multiple charts simultaneously (a

maximum of four charts).

Supports multiple parameter

displays in line chart

1. Displays multiple charts in a line chart (a

maximum of four charts).

2. Displays multiple parameters in a chart.

Supports event counter

1. Displays the total number of a selected

event in real time testing.

2. Displays the total number of a selected

event during log file replay.

3. Resets the event counter to zero.

Displays event flow chart

1. Supports default event flow display.

2. Supports user-defined event and messages

to be displayed in the event flow chart.

Displays the statistics

window

Drags a log file into the statistics window to

compile its statistics during data replay.

Messages and

Events View messages

1. Filters messages according to the L1/L2/L3

in order to filter unwanted messages.

2. Customizes message color and font.

3. Supports fuzzy message search.

4. Views message decoding information.

5. Supports synchronization of Message,

Event, and Line Chart windows.

Main Features

10 © Dingli 27-09-2016 DL1100DS

Function


6. Copies decoded message information.

7. Supports message history check.

8. Adds/deletes message label.

View events

1. Supports fuzzy event search, such as block

call or dropped call.

2. Supports message history check.

3. Filters events to find out abnormal events.

4. Supports synchronization of Message,

Event, and Line Chart windows.

5. Checks abnormal events.

6. Supports abnormal event analysis.

View

Parameters

Displays parameters by

category

1. Displays parameters according to radio,

system, and timeslot.

2. Displays parameters based on network

technologies: GPRS, EDGE, HSDPA,

HSUPA, HSPA+ and LTE.

Displays parameters by user-

defined category

1. Displays user-defined parameters (such as

ReLevSub, FtpDownloadRate, CS1, CS2)

in a window.

2. Supports data synchronization of two test

terminals.

3. Customizes parameter display.

Data

Processing

Log file partition

1. Supports log file partition by time.

2. Supports log file partition by port.

3. Supports log file partition by region.

4. Supports combined log file partition by

time, region and port.

Merge log files

Merges log files that are generated in different

time range and of the same device into one log

file.

Message and parameter

comparison

Supports message and parameter comparison

functions.

Data Replay

User-defined log file replay

1. Select any data to replay (decoded data and

data that has not been decoded).

2. Select scanner data to replay.

Supports forward, backward,

user-defined speed and

location replay

1. Users may replay log files forward and

backward.

2. The replay speed and replay start point can

be defined by users.

Dynamically replays all log

files

Log files can be replayed in a single or in

multiple windows.

Main Features

11 © Dingli 27-09-2016 DL1100DS

Function


Synchronizes log files in all

windows

1. Log files can be synchronized into multiple

windows.

2. Test log files and scanner log files can be

synchronized in time.

Supports log file

synchronization display

Supports synchronization: Click any test point

on the Map, Signaling, or Event window, and all

the information will be synchronized in all

windows.

Log file copy Copy a log file section by selecting the start

point and end point to generate a new log file.

Supports bookmark function

during data replay

Users may add bookmarks during test and data

replay.

Supports replay without

dongle

Re-decodes and replays log file while dongle is

not inserted (only parts of parameters can be

replayed).

New Supported Terminals

12 © Dingli 27-09-2016 DL1100DS

4 New Supported Terminals All the new devices support "Automatic Detection" where devices can be automtically detected

and configured.

4.1 IPhone 6s/6s Plus

Supported technologies and frequencies/bands:

TDD-LTE: 2600 (Band 38), 1900 (Band 39), 2300 (Band 40), 2500 (Band 41)

FDD—LTE: 2100 (Band 1), 1900 (Band 2), 1800 (Band 3), 1700/2100 (Band 4), 850

(Band 5), 2600 (Band 7), 900 (Band 8), 700 (Band 12), 700 (Band 13), 700 (Band 17),

800 (Band 18), 800 (Band 19), 800 (Band 20), 1900 (Band 25), 800 (Band 26), 800 (Band

27), 700 (Band 28), 700 (Band 29)

UMTS: 850 (B5), 900 (B8), 1900 (B2), 2100 (B1)

TD-SCDMA: 2000/1900

CDMA/EVDO: 800/1900/1700/2100

GSM/EDGE: 850/900/1800/1900

LTE category: Cat 6

4.2 Samsung Note5 N9200



FDD-LTE: 2100 (Band 1), 1900 (Band 2), 1800 (Band 3), 1700/2100 (Band 4), 850


800 (Band 19), 800 (Band 26), 700 (Band 28), 2300 (Band 30)

UMTS: 850 (Band 5), 900 (Band 8), 1900 (Band 2), 2100 (Band 1)

TD-SCDMA: 2000/1900

CDMA/EVDO: 800/1900/1700/2100

GSM/EDGE: 850/900/1800/1900

LTE category: Cat 6

LTE 2CC CA test is supported.

4.3 Nubia Z9 NX508J


TDD-LTE: 2600 (Band 38)/1900 (Band 39)/2300 (Band 40)/2500 (Band 41)

FDD-LTE: 2100 (Band 1) /1800 (Band 3)/ 2600 (Band 7)

UMTS: 850 (Band 5)/900 (Band 8)/1900 (Band 2)/2100 (Band 1)


13 © Dingli 27-09-2016 DL1100DS

TD-SCDMA: 2000/1900

CDMA/EVDO: 800

GSM/EDGE: 850/900/1800/1900

LTE category: Cat 6


4.4 Nubia Z9 MAX NX510J



FDD-LTE: 2100 (Band 1) /1800 (Band 3)/ 2600(Band 7)


TD-SCDMA: 2000/1900

CDMA/EVDO: 800

GSM/EDGE: 850/900/1800/1900

LTE category: Cat 6


4.5 Nubia Z9 MAX NX518J



FDD-LTE: 2100 (Band 1) /1800 (Band 3)/ 2600 (Band 7)


TD-SCDMA: 2000/1900

CDMA/EVDO: 800

GSM/EDGE: 850/900/1800/1900

LTE category: Cat 6


4.6 Qualcomm MTP 9640-NS





800 (Band 19), 800 (Band 20), 1900 (Band 25), 800 (Band 26), 700 (Band 28), 700 (Band

29)


14 © Dingli 27-09-2016 DL1100DS


TD-SCDMA: 2000/1900

CDMA/EVDO: 800

GSM/EDGE: 850/900/1800/1900

LTE category: Cat 6


4.7 ZTE Blade Q Lux


FDD-LTE: 1800 (Band 3)/ 900 (Band 8)

TDD-LTE: 2300 (Band 40)

UMTS: 900 (Band 8)/ 2100 (Band 1)

GSM/EDGE: 850/900/1800/1900

LTE category: Cat 4

FDD-LTE VoLTE test is supported.

4.8 ZTE MF831


TDD-LTE: 2600 (Band 38), 2300 (Band 40)

FDD-LTE: 2100 (Band 1), 1800 (Band 3), 2600 (Band 7), 900 (Band 8), 800 (Band 20)

UMTS: 900 (Band 8)/ 2100 (Band 1)

GSM/EDGE: 850/900/1800/1900

LTE category: Cat 4

4.9 HUAWEI Mate7 TL09


TDD-LTE: 2300 (Band 40)


(Band 5), 2600 (Band 7), 900 (Band 8), 800 (Band 20), 700 (Band 28)


GSM/EDGE: 850/900/1800/1900

LTE category: Cat 6


DINGLI CORP., LTD

Address: No. 8, 5th Technology Road, Gangwan Avenue, Zhuhai, 519085, P.R. China

Tel: +86-756-3626100 Fax: +86-756-3391900

Email: [email protected] [email protected]

pilot pioneer datasheet v10 - dingli.com documents/pilot...tdd-lte vilte test is supported by htc m8...

Documents