Negotiated sales for heavy equipment & industrial assets

2006 Caterpillar 777D

Year 2006 Manufacturer CaterpillarModel 777DAsset Type Rock TruckSerial Number CAT0777DLAGC02255Usage 29,455 hrsComes with retarder, A/C, liner, heated box, auto lube, 27.00R49

rbauction.com/privatetreaty

Asset 8

Don’t miss out! Contact Scott Zeilstra to make an offer:+1.780.686.0725 szeilstra@rbauction.com

PICTURE TO COME

COMPONENT

CHANGES

COMPONENT CHANGE-OUT REPORT

Verified by: GMAM Assets – Forms - FRM006 Version Date Review Page No

Initial: Component Change-Out Report 4 Nov 11 Nov 13 Page 1

MAINTENANCE PLANNER TO UPDATE THE COMPONENT REGISTER IN EQUIPMENT MANAGER

NOTIFICATION FOR UPDATING COMPONENT HISTORY FOR THE ASSET ID OF ALL MAJOR ASSETS CHANGE-OUT ACTIVITY?

FORWARD THIS NOTIFICATION TO THE REGIONAL MAINTENANCE PLANNER FOR PROCESSING Planned

ASSET DETAILS:

Originator Name: Matt Biamonte Date: March / 10 / 2015

Asset ID: RDC049 Change-Out Date: SEPT / 1 / 2014

Make: cat Change-Out SMU: 11280

Model: 777d Planned Disposal SMU:

Serial No: Agc02255 WON for Change-Out: EME1432

COMPONENT DETAILS: Component Description:

Rear struts left rear strut

COMPONENT REMOVED DETAILS:

Serial No.: Part number: 2474883 Component Usage Hrs:

Arrangement No.: Recommended Life Hrs:

Reason Change Out Required: x Failure Scheduled Change-Out SOS Investigation

Other:- EXCESSIVE LEAKAGE

COMPONENT INSTALLED DETAILS:

Serial No.: Part number: 2474883-EXC PS ID Used (if applicable):

Arrangement No.: Other Supply:

Component Repair Details: New Reconditioned Emeco Parts Component x Dealer PEX

Reconditioned or Supplied By: exchange struts through finning

Warranty Terms & Provisions:

COMMENTS: (Results of SOS Investigation and/or Failure Analysis, Warranty Conditions, etc.)

COPIES FOR SYSTEM UPDATE & FILING: (Component History for Asset ID to be Updated)

Maintenance Planner: Name: Signature: Date: / /

Entered into Great Plains: Name: Date: / /

COMPONENT CHANGE-OUT REPORT

Verified by: GMAM Assets – Forms - FRM006 Version Date Review Page No

Initial: Component Change-Out Report 4 Nov 11 Nov 13 Page 1

MAINTENANCE PLANNER TO UPDATE THE COMPONENT REGISTER IN EQUIPMENT MANAGER

NOTIFICATION FOR UPDATING COMPONENT HISTORY FOR THE ASSET ID OF ALL MAJOR ASSETS CHANGE-OUT ACTIVITY?

FORWARD THIS NOTIFICATION TO THE REGIONAL MAINTENANCE PLANNER FOR PROCESSING Planned

ASSET DETAILS:

Originator Name: Matt Biamonte Date: March / 10 / 2015

Asset ID: RDC049 Change-Out Date: SEPT / 1 / 2014

Make: cat Change-Out SMU: 11280

Model: 777d Planned Disposal SMU:

Serial No: Agc02255 WON for Change-Out: EME1433

COMPONENT DETAILS: Component Description:

RIGHT REAR STRUT

COMPONENT REMOVED DETAILS:

Serial No.: Part number: 2474883 Component Usage Hrs:

Arrangement No.: Recommended Life Hrs:

Reason Change Out Required: x Failure Scheduled Change-Out SOS Investigation

Other:- EXCESSIVE LEAKAGE

COMPONENT INSTALLED DETAILS:

Serial No.: Part number: 2474883-EXC PS ID Used (if applicable):

Arrangement No.: Other Supply:

Component Repair Details: New Reconditioned Emeco Parts Component x Dealer PEX

Reconditioned or Supplied By: exchange struts through finning

Warranty Terms & Provisions:

COMMENTS: (Results of SOS Investigation and/or Failure Analysis, Warranty Conditions, etc.)

COPIES FOR SYSTEM UPDATE & FILING: (Component History for Asset ID to be Updated)

Maintenance Planner: Name: Signature: Date: / /

Entered into Great Plains: Name: Date: / /

Emeco Daily Time Sheet

Date: 10/04/13 Day:Tuesday Shift: D/S W/O # 175073 Unit Number: rdc049 SMU IN 7450 SMU Out 7450

Machine S/N Parts Ordered No Time down Apr-04 am/pm

Customer sunhills mining Customer Unit Number Time Up down am/pm

Machine Location: highvale Site Contact JHA Completed Yes Warranty or Redo No

Description Of Work performed steering

Segment If more then one S/N or W/O is worked on than a separate report must be used

Complaint

Cause

Correction

install steer pump

remove , clean and reinstall steering oil reseviour

start connecting steering lines

replace steering return filter, replace case drain filter

Complications

Repair Hours

Segment ST OT

ss 8 2

Total

Matthew Biamonte

The above work has been completed to my satisfaction Tech's Name Print Customer Name Print

Approval Tech's Signature Customer Signature

SERVICE REPORTS

Verified by: J.Everett © EMECO International Issue Date Review Page No.

Initial: MAINTCLF004 – CAT 777BCD Dump Truck

2000 Hour Service Sheet 1.0 Apr 2006 Apr 2007 Page 1 of 6

MAINTCLF004 CAT 777BCD DUMP TRUCK

2000HR SERVICE Unit Number: SMU: Date:

SAMPLE Initial Engine Transmission Hydraulic / Brakes Steering Front hubs LH ( ) RH ( ) Differential Final Drives LH ( ) RH ( ) Cooling system (level 2 analysis) – aftercooler and engine REPLACE Engine oil Cap (91 L) Engine oil filters Cut 1 filter open Clean ( ) Metal ( ) Front Hub oil LH ( ) RH ( ) Cap (5 L each) Front brake cooling filters (hydraulic) Fuel filters Primary air filters Secondary air filters Transmission oil filter Transmission breather Transmission oil Cap (95 L) system only Hydraulic tank breather Hoist, torque Converter and Brake Oil Cap (250 L) Tank Hoist, torque Converter and Brake tank Breather Steering system oil filter Steering system oil Cap(83 L) Tank Park brake release filter Differential oil Cap (224 L) Final drive oil Cap (45 L each) Front Axle breather Differential Breather Cab air conditioner filters clean ( ) change ( ) CLEAN Hoist high pressure screens clean ( ) metal ( ) material ( ) Torque converter outlet screens clean ( ) metal ( ) Transmission magnetic screens clean ( ) metal ( ) material ( ) Batteries and terminals Engine breathers clean ( ) change ( ) Differential breather Front hub breathers Transmission breather Air conditioner filter Air/hydraulic cylinder breather clean Overhaul air dryer Walkways, handrails, cab – controls, screens, floors etc free of grease and oils CHECK Engine oil level Coolant charge level Drain water and sediment from fuel tank Drain moisture and sediment from air tank

Verified by: J.Everett © EMECO International Issue Date Review Page No.

Initial: MAINTCLF004 – CAT 777BCD Dump Truck

2000 Hour Service Sheet 1.0 Apr 2006 Apr 2007 Page 2 of 6

Transmission oil level Differential oil level Final drive oil levels Hoist, torque converter and brake oil tanks level Front wheel hub oil levels LH ( ) RH ( ) Steering oil level Fill fuel tank and record litres if applicable ( L) GREASE Fan hub and jockey pulley (hand gun only) Driveshaft splines and universal joints (hand gun only) Manually grease all injectors & check lines for condition Fill bulk grease tank

Ball Stud Inspection 1) Clean all steer cylinder and tie rod ends down. 2) Drive truck in straight line so as not to load up steering geometry. 3) Chock and tag vehicle 4) Bar all tie rod and steer cylinder points to locate any movement. 5) If movement found, set up dial indicator and measure amount of movement. 6) If movement is greater than 1 mm, remove cap and determine is wear is between ball stud and bearing race, or bearing race and housing. Record which area is worn 7) Ball stud wear limits: 0 to 1.02 mm - OK 1.02 to 1.27 mm - schedule for change out 1.27 mm and above - change out ball stud 8) Record measurement:

CHECK 1 2 3 4 Steering accumulator – using ground level engine shutdown switch stop engine then check for steering operation.

Visual check on duo cone leakage acc hub positions Report on any significant coolant usage (to indicate internal leakage) Are ball stud inspections due? Check steering ball joint wear as per service manual, maximum wear in any ball joint is 1.02mm. Check all ball joint covers are in good condition

Check tie rod ends for movement

1 2 3 4 5 6 7 8

LEGEND FOR COLUMNS: 1 – Defect found and repaired 2 – Defect on machine, machine still OK 3 – OK 4 – Not applicable

Verified by: J.Everett © EMECO International Issue Date Review Page No.

Initial: MAINTCLF004 – CAT 777BCD Dump Truck

2000 Hour Service Sheet 1.0 Apr 2006 Apr 2007 Page 3 of 6

CHECK 1 2 3 4 Check tension and orientation of tie rod end clamps. Open portion of clamp should be aligned with one slot in tie rod (see SERVB-CAT2 in RMS for guidance). Tension is 583 Nm±27

Check the tension and condition of the steering centre linkage bolts (250Nm). If bolt require re-tensioning, relace bolts and reinstall as per SERVB-CAT3 service bulletin in RMS

Steering (cylinders, valve and joints) Air Conditioner – condition and operation Air Dryer operation, check for moisture in secondary air tank Replace air dryers desiccant Belts – inspection/adjust/replace Rock ejectors Induction system for leaks and clamps for tightness All hoses for general condition and chaffing Cooling system hoses for condition and clamps for tightness Brake cooling hoses for leaks, hardness and damage. Replace as required Fuel system for loose bolts and fittings Download VIMS, check operation and report overspeeds. Inspect hydraulic hoist cylinder hoses for damage, wear or deteriorated condition. Replace hoses as required.

Engine mounts Frame and body support pads. Clean and inspect for cracks ROPS/Cab and chassis attachment points for damage, cracks, corrosion or loose/missing bolts

Retarder lever free play Radiator for debris (wash if necessary) Cooling system pressure cap- clean inspect and replace as required Cooling system pressure relief valve - clean Engine shutdown system – test operation Exhaust system for leaks and clamps for tightness All points are receiving grease Differential Thrust pin clearance - Check A-frame endplay - adjust Inspect pre-start book and ensure all defects are repaired or documented Suspension cylinder heights (adjust if necessary): LHF LHR RHF RHR SPEC FRONT 216 mm REAR 1040 mm

Steering accumulator nitrogen pressure: - See table for acceptable pressure. Use only correct procedure in workshop manual.

21 °C 300 psi 27 °C 306 psi 32 °C 312 psi 43 °C 324 psi Test for leakage in the service brake and retarder system – as per caterpillar Systems operations and testing manual – air Systems and Brakes - Spec Roto Chamber no more than 3.2 mm in 10 minutes – record below

FRONT REAR Left Right Brake pack heights: as per Service Manual procedure RHF LHF RHR LHR Maximum permissible piston travel is: Front 14.7mm Rear 14.5mm Use only correct procedure in workshop manual

Tyre pressures: Adjust cold pressure only Radial - 105 psi cold Bias Ply – 82 psi cold

Pos 1 Pos 2 Pos 3 Actual Adjusted

Verified by: J.Everett © EMECO International Issue Date Review Page No.

Initial: MAINTCLF004 – CAT 777BCD Dump Truck

2000 Hour Service Sheet 1.0 Apr 2006 Apr 2007 Page 4 of 6

CHECK 1 2 3 4 Pos 4 Pos 5 Pos 6 Actual Adjusted Tread depths: (Record any abnormal wear, cuts or damage on back sheet) Pos 1 Pos 2 Pos 3 Actual MM Pos 4 Pos 5 Pos 6 Actual MM Magnetic plug conditions*: RHF LHF RHR LHR

NOTE:

Boxes A - F are to be initialled by person carrying out safety checks. Every person carrying out these checks must also sign off Safety Check Sheet before the end of each shift.

SAFETY CHECKS A B C D E F Service Brake Operation Stall Test Spec: 777BCD 1st Gear Stall Test - must hold at 1300 RPM

Emergency/secondary brake stall test Spec: 777BCD 1st Gear Stall Test - must hold at 1300 RPM

Park brake operation Spec: 777BCD 1st Gear Stall Test - must hold at 1300 RPM

Retarder operation Steering operation Emergency steering operation Seat belt – retainers and operation Seats – suspension adjustment/condition Horns – air and electric Wipers Mirrors Doors Windows Gauges Audible alarm and warning lights Body up reverse inhibitor Grab rails Steps Fire extinguishers – invert & shake to loosen powder & inspect date Fire suppression bottle charge Tyre condition Lights Reverse alarm Wheel nuts Pin retainers Cab condition Operation of emergency stop Accumulation of fuel, oil, grease etc that may cause a fire Tray condition Rock ejectors condition (bent?) Grease system operation Two way radio operation

*LEGEND: OK – OK P – Paste HP – Heavy Paste

LF – Light Flakes

HF – Heavy Flakes (Return to Foreman)

LEGEND FOR COLUMNS: A – Machine is not safe – defect must be repaired D – Defect found and repaired B – Defect found – authorisation required before returning to work E – OK C – Defect found and recorded – machine safe to operate F – Not applicable

Verified by: J.Everett © EMECO International Issue Date Review Page No.

Initial: MAINTCLF004 – CAT 777BCD Dump Truck

2000 Hour Service Sheet 1.0 Apr 2006 Apr 2007 Page 5 of 6

Chassis Crack Inspection

Notes: - Inspect all coloured areas for cracks – clean as required

- All non repaired cracks to be marked a crack ends and dated using paint marker

Rear tail casting section

1 2 3

LEGEND FOR COLUMNS: 1 – Crack found and repaired 2 – Crack on machine, machine still OK 3 – No cracks found

Cross tube area (Check both sides)

1 2 3

1 2 3

Fuel tank and hydraulic mounts (Check both sides)

1 2 3

Hoist cylinder supports and cross tube (Check both sides)

Transition castings (777 & 785 only)

1 2 3

Pedestal castings

1 2 3

1 2 3

Front Strut Mounting Castings –check weld section and flanges

1 2 3

Engine (both sides) and cab mounts

Verified by: J.Everett © EMECO International Issue Date Review Page No.

Initial: MAINTCLF004 – CAT 777BCD Dump Truck

2000 Hour Service Sheet 1.0 Apr 2006 Apr 2007 Page 6 of 6

DEFECTS PARTS SHEET YES/NO

COMPLETED YES/NO

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

Comments:

CARRIED OUT BY: CHECKED & RECORDED BY:

Print Name: Print Name:

Signed: Signed:

Date: Date:

Verified by: J.Everett © EMECO International Issue Date Review Page No.

Initial: MAINTCLF001 – CAT 777BCD Dump Truck

250 Hour Service Sheet 1.0 Apr 2006 Apr 2007 Page 1 of 4

MAINTCLF001 CAT 777BCD DUMP TRUCK

250HR SERVICE Unit Number: SMU: Date:

SAMPLE Initial Engine Transmission REPLACE Engine oil Cap (91 L) Engine oil filters Cut 1 filter open Clean ( ) Metal ( ) Fuel filters CLEAN Transmission magnetic screens clean ( ) metal ( ) material ( ) Batteries and terminals Engine breathers clean ( ) change ( ) Engine air Filter Pre-cleaner Assembly Air conditioner filter Walkways, handrails, cab – controls, screens, floors etc free of grease and oils CHECK Engine oil level Coolant charge level Drain water and sediment from fuel tank Drain moisture and sediment from air tank Transmission oil level Differential oil level Final drive oil levels Hoist, torque converter and brake oil tanks level Front wheel hub oil levels LH ( ) RH ( ) Steering oil level Fill fuel tank and record litres if applicable ( L) GREASE Fan hub and jockey pulley (hand gun only) Driveshaft splines and universal joints (hand gun only) Fill bulk grease tank

CHECK 1 2 3 4 Steering accumulator – using ground level engine shutdown switch stop engine then check for steering operation.

Visual check on duo cone leakage acc hub positions Report on any significant coolant usage (to indicate internal leakage) Visually inspect steering ball joint wear and movement. Check all ball joint covers are in good condition.

Check tie rod ends for movement (visual only – measure if movement) Steering (cylinders, valve and joints) Air Conditioner – condition and operation Air Dryer operation, check for moisture in secondary air tank Belts – inspection/adjust/replace

LEGEND FOR COLUMNS: 1 – Defect found and repaired 2 – Defect on machine, machine still OK 3 – OK 4 – Not applicable

Verified by: J.Everett © EMECO International Issue Date Review Page No.

Initial: MAINTCLF001 – CAT 777BCD Dump Truck

250 Hour Service Sheet 1.0 Apr 2006 Apr 2007 Page 2 of 4

CHECK 1 2 3 4 Retarder lever free play Radiator for debris (wash if necessary) Cooling system pressure cap- clean inspect and replace as required Download VIMS, check operation and report overspeeds. Engine shutdown system – test operation All points are receiving grease Inspect pre-start book and ensure all defects are repaired or documented Tyre pressures: Adjust cold pressure only Radial - 105 psi cold Bias Ply - 82 psi cold

Pos 1 Pos 2 Pos 3 Actual Adjusted Pos 4 Pos 5 Pos 6 Actual Adjusted Magnetic plug conditions*: RHF LHF RHR LHR Adjusted NOTE: Boxes A - F are to be initialled by person carrying out safety checks. Every person carrying out these checks must also sign off Safety Check Sheet before the end of each shift.

SAFETY CHECKS A B C D E F Service Brake Operation Stall Test Spec: 777BCD 1st Gear Stall Test - must hold at 1300 RPM

Emergency/secondary brake stall test Spec: 777BCD 1st Gear Stall Test - must hold at 1300 RPM

Park brake operation Spec: 777BCD 1st Gear Stall Test - must hold at 1300 RPM

Retarder operation Steering operation Emergency steering operation Seat belt – retainers and operation Seats – suspension adjustment/condition Horns – air and electric Wipers Mirrors Doors Windows Gauges Audible alarm and warning lights Body up reverse inhibitor Grab rails Steps Fire extinguishers – invert & shake to loosen powder & inspect date Fire suppression bottle charge Tyre condition Lights Reverse alarm Wheel nuts

*LEGEND: OK – OK P – Paste HP – Heavy Paste

LF – Light Flakes

HF – Heavy Flakes (Return to Foreman)

LEGEND FOR COLUMNS: A – Machine is not safe – defect must be repaired D – Defect found and repaired B – Defect found – authorisation required before returning to work E – OK C – Defect found and recorded – machine safe to operate F – Not applicable

Verified by: J.Everett © EMECO International Issue Date Review Page No.

Initial: MAINTCLF001 – CAT 777BCD Dump Truck

250 Hour Service Sheet 1.0 Apr 2006 Apr 2007 Page 3 of 4

SAFETY CHECKS A B C D E F Pin retainers Cab condition Operation of emergency stop Accumulation of fuel, oil, grease etc that may cause a fire Tray condition Rock ejectors condition (bent?) Grease system operation Two way radio operation

Chassis Crack Inspection

Notes: - Inspect all coloured areas for cracks – clean as required

- All non repaired cracks to be marked a crack ends and dated using paint marker

Rear tail casting section

1 2 3

LEGEND FOR COLUMNS: 1 – Crack found and repaired 2 – Crack on machine, machine still OK 3 – No cracks found

Cross tube area (Check both sides)

1 2 3

1 2 3

Fuel tank and hydraulic mounts (Check both sides)

1 2 3

Hoist cylinder supports and cross tube (Check both sides)

Transition castings (777 & 785 only)

1 2 3

Pedestal castings

1 2 3

1 2 3

Front Strut Mounting Castings –check weld section and flanges

1 2 3

Engine (both sides) and cab mounts

Verified by: J.Everett © EMECO International Issue Date Review Page No.

Initial: MAINTCLF001 – CAT 777BCD Dump Truck

250 Hour Service Sheet 1.0 Apr 2006 Apr 2007 Page 4 of 4

DEFECTS PARTS SHEET

YES/NO COMPLETED

YES/NO 1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

Comments:

CARRIED OUT BY: CHECKED & RECORDED BY:

Print Name: Print Name:

Signed: Signed:

Date: Date:

JHA CompletedNo Yes

MakeYes No Yes No

ST OT

Yes No

Rev: 1/25/2013

Work Date

Customer Unit No

SMU OutWork Order No Unit Number Shift

Day Shift Night Shift

SMU In

Technician Name Signature

Time UpTime DownSite ContactEquipment Location

Repair 1 Information

Model Serial Number

Customer Name

Repair 2 Information

Wty or Redo

Complaint Correction

Repair 1 Details

Component - Work Type

Parts Ordered

Total

Repair HoursSegment

Complications:

Complaint

Repair 2 Details

Component - Work Type Correction

Emeco Supervisor Name

Complications:

Travel Allowance

The above work has been completed to my satisfaction

Customer ApprovalEmeco ApprovalSignature

Yes No Machine Released to Customer

Customer Name Signature

JHA CompletedNo Yes

MakeYes No Yes No

ST OT

Yes No

Rev: 1/25/2013

Work Date

Customer Unit No

SMU OutWork Order No Unit Number Shift

Day Shift Night Shift

SMU In

Technician Name Signature

Time UpTime DownSite ContactEquipment Location

Repair 1 Information

Model Serial Number

Customer Name

Repair 2 Information

Wty or Redo

Complaint Correction

Repair 1 Details

Component - Work Type

Parts Ordered

Total

Repair HoursSegment

Complications:

Complaint

Repair 2 Details

Component - Work Type Correction

Emeco Supervisor Name

Complications:

Travel Allowance

The above work has been completed to my satisfaction

Customer ApprovalEmeco ApprovalSignature

Yes No Machine Released to Customer

Customer Name Signature

WORK ORDER HISTORY

Maintenance History for Equipment ID: RDC049Start Date Meter Reading (Hrs)Job Number / Description

9-Oct-2017 WOC240942 - FRONT TIRE INSTALLATION 8,610.

11-Aug-2015 WOC258544 - SRV > 1500 HR 11,754CARRY OUT 1500HR SERVICE AND REPAIRS AS REQUIRED

ENGINE HOURS:

DATE:

SERVICE CARRY OUT BY:

MAGNETIC PLUG REPORT

LHF/FD:RHF/FD:F/DIFF:LHR/FD:RHR/FD:R/DIFF:

ALL DEFECTS ENTERED INTO GP.

1-Jul-2015 WOC258372 - TYR > FY2016 PREPAID TIRES 11,710

1-Jul-2015 WOC257895 - 2016 R&M - JUL 1 TO JUN 30 11,642

25-Jun-2015 WOC257727 - SRV > CHANGE DIFF & FINAL OIL 11,642CARRY OUT DIFF AND FINAL OIL CHANGE

26-May-2015 WOC257341 - SRV > 1250 HR 11,754CARRY OUT 1250HR SERVICE AND REPAIRS AS REQUIRED

8-Apr-2015 WOC256650 - FIRE SUPPRESSION PM 11,291.

27-Oct-2014 WOC254923 - BC > TRUCK TRANSPORT 11,288Transport from Sunhills to Acheson

11-Sep-2014 WOC254629 - BC > DAMAGE -TRANS COST 11,263Repair unit- SunhillsTransportation cost

9-Sep-2014 WOC254622 - PERFORM ENGINE VALVE SET 11,263.

24-Aug-2014 WOC254433 - BC > CUSTOMER DAMAGE 11,263Repair customer damage

19-Aug-2014 WOC254417 - SRV > 1000 HR 11,483CARRY OUT 1000HR SERVICE AND REPAIRS AS REQUIRED

3-Aug-2014 WOC228257 - PERFORM ENGINE VALVE SET 11,154.

8-Jul-2014 EME1432 - ME > STRUT LEFT REAR REPLACE 11,280

Page 1 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

Replace rear left hand side strut using Finning EXC component.

8-Jul-2014 EME1433 - ME > STRUT RIGHT REAR REPLACE 11,280Replace rear right hand side strut using Finning EXC component.

1-Jul-2014 WOC254216 - 2015 R&M - JUL 1 TO JUN 30 11,157

1-Jul-2014 WOC254483 - TYR > FY2015 PREPAID TIRES 11,263

18-Jun-2014 WOC253768 - SRV > 750 HR 11,238CARRY OUT 750HR SERVICE AND REPAIRS AS REQUIRED

17-Jun-2014 WOC253750 - BRAKE AND STEERING TEST 36,640.

15-Jun-2014 WOC239763 - BRAKE AND STEERING TEST 10,907.

8-May-2014 WOC245893 - FIRE SUPPRESSION PM 11,291.

6-May-2014 WOC253441 - SRV > 500 HR 10,922CARRY OUT 500HR SERVICE AND REPAIRS AS REQUIRED

22-Apr-2014 WOC253341 - VISIONLINK REPAIR 10,159REPAIR SCOPE:

15-Apr-2014 WOC253260 - SRV > 250 HR 10,470CARRY OUT 250HR SERVICE AND REPAIRS AS REQUIRED

12-Feb-2014 WOC251800 - BC > DISASSEMBLE MACHINE 9,889Remove tray/ tires .

16-Jan-2014 WOC247678 - SRV > 2000 HR 10,149CARRY OUT 2000HR SERVICE AND REPAIRS AS REQUIRED

1-Jan-2014 WOC246562 - 2014 R&M - JAN 1 TO DEC 31 9,5842014/01/02-SL-9695RON DUYVEWAARDTPERFORMED 500HR SERVICE

2014/01/03-TR-9713RON DUYVEWAARDTCHECKED TRANS OP. NO PROBLEM WITH REVERSE. POSSIBLY DUMP LEVER IN WRONG POSITION. WAITED IN AREA WHILE TRUCK MADE A FEW ROUNDS TO ENSURE NO MORE ISSUES WITH REVERSE.

2014/01/12-FR-9916RON DUYVEWAARDTMOVED WASH TRUCK FROM WASHBAY TO YARD. WELDED NEW HANDLE ONTO BOX SAFETY PIN

2014/01/13-OT-9916RON DUYVEWAARDTSTARTED CHECKING FOR DEFECTS

2014/01/04-EL-SU-9657SCOTT MCLENNANTROUBLESHOOT CAB HEATER FAN NOT WORKING, FOUND MOTOR FAULTY. REMOVED MOTOR FROM RDC030 AND INSTALLED ON RDC049, TOPPED UP LOW STRUTS. CALLED UNIT UP. TROUBLESHOOT UNIT NOT GOING INTO REVERSE, FOUND LOOSE CONNECTION ON BOX UP SENSOR. CALLED UNIT UP

2014/01/01-EN-9657THOMAS FINKBEINERINSPECTED AND VERIFIED OIL GAUGE BROKEN. VERIFIED ALL PIECES COMPLETE. INSTALLED NEW DIPSTICK AND FOUND IT DIFFICULT TO INSTALL AT ENGINE BLOCK. REMOVED AND INSPECTED FOR RESTRICTION. OK. INSTALLED DIPSTICK AND CHECKED OIL LEVEL. OK.

27-Dec-2013 WOC244466 - SRV > 1500 HR 9,695

Page 2 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

CARRY OUT 1000HR SERVICE AND REPAIRS AS REQUIRED

ENGINE HOURS:

DATE:

SERVICE CARRY OUT BY:

MAGNETIC PLUG REPORT

LHF/FD:RHF/FD:F/DIFF:LHR/FD:RHR/FD:R/DIFF:

ALL DEFECTS ENTERED INTO GP.

JAN 2/14 - 1000 PM SKIPPED - 1500 DONEWANDAK

30-Nov-2013 WOC240180 - SRV > 750 HR 9,099CARRY OUT 750HR SERVICE AND REPAIRS AS REQUIRED

ENGINE HOURS:

DATE:

SERVICE CARRY OUT BY:

MAGNETIC PLUG REPORT

LHF/FD:RHF/FD:F/DIFF:LHR/FD:RHR/FD:R/DIFF:

ALL DEFECTS ENTERED INTO GP.

8-Nov-2013 WOC223305 - FIRE SUPPRESSION PM 8,689.

4-Sep-2013 WOC233314 - SRV > 500 HR 8,548CARRY OUT 500HR SERVICE AND REPAIRS AS REQUIRED

ENGINE HOURS:

DATE:

SERVICE CARRY OUT BY:

MAGNETIC PLUG REPORT

LHF/FD:RHF/FD:F/DIFF:LHR/FD:RHR/FD:R/DIFF:

ALL DEFECTS ENTERED INTO GP.

2013/10/06 SL-EL-8548SCOTT MCLENNANPERFORM 500 HR SERVICE, GATHER UP FILTERS FOR SERVICE FROM EXTRA FILTERS IN TRAILER. REPAIR AM/FM RADIO, REPAIR REVERSE LIGHTS

15-Aug-2013 WOC236786 - B/C SEAT BELTS 8,353Repalce seat belts - Back charge as per contract

4-Jul-2013 WOC232397 - B/C REPAIRS 8,209Back charge repairs

Page 3 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

21-Jun-2013 WOC231320 - INSTALL VISIONLINK GPS 8,209.

18-Jun-2013 WOC223320 - SRV > 250 HR 8,209CARRY OUT 250HR SERVICE AND REPAIRS AS REQUIRED

ENGINE HOURS:

DATE:

SERVICE CARRY OUT BY:

MAGNETIC PLUG REPORT:

LHF/FD:RHF/FD:F/DIFF:LHR/FD:RHR/FD:R/DIFF:

ALL DEFECTS ENTERED INTO GP.

2013/07/13 SERVICE/FRAMESCOTT MCLENNAN250 HR SERVICE. DRAIN LUBE TRUCK WASTE TANK AND FILL ALL OIL TANKS. HEAT UP AND STRAIGHTEN BOTH INJECTOR MOUNTING BRACKETS. REMOVE BROKEN BOLT FROM FUEL TANK FOR MUD FLAP CHAIN.

10-Jun-2013 WOC209446 - 2000HR SERVICE 7,754CARRY OUT 1750HR SERVICE AND REPAIRS AS REQUIRED

ENGINE HOURS:

DATE:

SERVICE CARRY OUT BY:

MAGNETIC PLUG REPORT

LHF/FD:RHF/FD:F/DIFF:LHR/FD:RHR/FD:R/DIFF:

ALL DEFECTS ENTERED INTO GP.

2013-05-13- 2000 HR PMMATTHEW BIAMONTE2000 HR SERVICE, PICK UP PARTS AT FINNING

14-May-2013 WOC223064 - FRONT TIRE ROTATION 8,561.

11-May-2013 WOC199174 - FIRE SUPPRESSION PM 7,753

3-Apr-2013 WOC206457 - PERFORM ENGINE VALVE SET 7,946.

2013-06-06- ENGINEMATTHEW BIAMONTEPERFORM ENGINE VALVE SET

1-Apr-2013 WOC199250 - 250HR SERVICE 7,464

Page 4 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

CARRY OUT 750HR SERVICE AND REPAIRS AS REQUIRED

ENGINE HOURS:

DATE:

SERVICE CARRY OUT BY:

MAGNETIC PLUG REPORT

LHF/FD:RHF/FD:F/DIFF:LHR/FD:RHR/FD:R/DIFF:

ALL DEFECTS ENTERED INTO GP.

11-Mar-2013 WOC193864 - 500HR SERVICE 7,107CARRY OUT 500HR SERVICE AND REPAIRS AS REQUIRED

ENGINE HOURS:

DATE:

SERVICE CARRY OUT BY:

MAGNETIC PLUG REPORT

LHF/FD:RHF/FD:F/DIFF:LHR/FD:RHR/FD:R/DIFF:

ALL DEFECTS ENTERED INTO GP.

2013-03-13-MATTHEW BIAMONTECHANGE ENG OIL, CHANGE SEAT SHOCK

7-Feb-2013 WOC177146 - 250HR SERVICE 6,927PERFORM A 250HR SERVICE

2-Jan-2013 WOC175073 - JAN 2 - DEC 31 2013 R&M WO 6,023

Page 5 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

*************************************************************************************************************************************************NEW FORMAT TO BE USED TO TRANSFER REPAIR NOTES:

DATE (YYYY-MM-DD) - COMPONENT - Work TypeMechanic Name

-NOTE DETAIL A-NOTE DETAIL B-NOTE DETAIL C

EXAMPLE:

2012-07-23 - ENGINE - Inspect for LeaksEd. S.

Removed panels and check for coolant and oil leaks on machine. No leaks. Check oil level, coolantlevel and hydraulic levels, ok. There is no leak from engine. Start Unit run fine, let run for about 45min. No leaks.

************************************************************************************************************************************************2013-01-15-MATTHEW BIAMONTEINSPECT FOR KICKOUT COMPLAIN AGAIN, 700-2 CODE, CHECK GROUND WIRE FROM TCM TOGROUND 0.0 OHMS (FULL HARNESS WITH JUMPER TO TRANS POSITION SENSOR) CHECK SENSORSUPPLY VOLTAGE ORG 25 VOLTS, CHECK GEAR SIGNAL WIRES. ALL 5 VOLTS EXCEPT FOR ONE AT 11VOLTS, DISCONNECT POSITION POSITION SWITCH SENSOR HARNESS FROM MAIN HARNESS. TESTALL GEAR SIGNAL WIRES @ 5 VOLTS, REMOVED HARNESS FOUND MOISTURE ON BACK SIDE OFCONNECTOR, BLEW OUT AND TESTED RESISTANCE APPEARED OKAY. REMOVED SHIFT CARD ANDBLEW OUT TESTED VOLTAGE DROPS THROUGH JUMPER HARNESS, FOUND INTERMETENT HIGHVOLTAGE DROP ON ONE WIRE. REINSTALLED TIGHT AD DRY COULD NOT DUPLICATE AGAINORDERED NEW JUMPER HARNESS AND GEAR SENSOR IN THE EVENT OF ANOTHER OCCURANCE

2013-01-12MATTHEW BIAMONTEFOUND HARNESS HAS INTERMITTENT FAULT ON GROUND WIRE, ORDER PARTS, HARNESS FAILEDDUE TO IMPROPER INSTALLATION, ALL PROPER CLIPS ORDERED

2013-01-14MATTHEW BIAMONTER & R TRANSMISSION HARNESS, CABE TO TRANSMISSION

2013-02-22SCOTT MCLENNONPERFORM 250 HOUR SERVICE

2013-02-24-SCOTT MCLENNONTRAVEL TO UNIT, REPLACE FRONT SIGNAL LIGHTS

2013-02-25-SCOTT MCLENNONTROUBLESHOOT STEERING COLUMN PLAY ORDERED NEW COLUMN, TROUBLESHOOT AND ORDERSEAT SHOCK ABSORBER

2013-03-01SCOTT MCLENNONINSTALL NEW MUDFLAPS, INSTALL NEW STEERING COLUMN, REPAIR SEAT ADJUSTER

2013-03-15-MATTHEW BIAMONTEWAS ABLE TO RESUSE OLD SHOCK AND INSTALL IN CORRECT POSITION TO FIX MAHCINE UP, NOTSEAT BASE IS BROKEN INSIDE WHERE SHOCK WOULD NORMALLY ATTACH TO, USED HOLES IN SEATFRAME FOR DUAL SHOC SET UP

2013-02-24-SCOTT MCLENNONTRAVEL TO UNIT, PAYLOAD CODE PRESENT ON DASH, TRAVEL TO TRAILER PICK UP NEW STRUTSENSOR AND INSTALL

2013-04-03-DAVE DEFEHRBLAST DOZER WITH CANNON, DEGREASE, PRESSURE WASH

2013-04-04-MATTHEW BIAMONTE

Page 6 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

HAD TO LEAVE MACHINE TO GET TO ANOTHER

2013-04-05- STEERINGMATTHEW BIAMONTEDISCONNECT SUP STEER MOTOR FOUND NO PRESSURE FROM STEER PUMP, NO PRESSURE INSTEERING SYSTEM WITH ENG RUNNING, PULL STEERING FILTER FOUND BRASS IN FILTER, ORDERSTEERING PUMP

2013-04-09- STEERINGMATTHEW BIAMONTEREMOVE STEER PUMP

2013-04-10-STEERINGMATTHEW BIAMONTEINSTALL STEER PUMP, REMOVE, CLEAN AND REINSTALL STEERING OIL RESERVIOUR, STARTCONNECTING STEERING LINES, REPLACE STEERING RETURN FILTER, REPLACE CASE DRAIN FILTER

2013-04-11- STEERINGMATTHEW BIAMONTERIG OUT HYD LINES, FINISH CONNECTING ALL LINES, REPAIR LEAK ON BRAKE COOLING LINE, GETLUBE TRUCK TO FILL TANK, TEST OK

2013-04-19SCOTT MCLENNANTRAVEL TO UNIT T/S WEAK RADIO SIGNAL, FOUND ANTENNA CABLE AT BACK OF RADIO NOT FULLYCONNECTED, REATTACHED, REINSTALLED RADIO AND PANEL

2013-04-28SCOTT MCLENNANTRAVEL TO UNIT, REPAIR LOOSE PANEL ON DECK, CHECK OVER UNIT

2013-05-06- ENGINERYAN ELLISTRAVEL TO MACHINE, CONNECT ET AND FOUND THE LEVEL SENSOR FAULTS, CHECK ENGINE OILLEVEL, IT WAS AT THE ADD MARK, TRAVEL TO SHOP GOT A PAIL OF OIL AND TOPPED UP, CODESTILL SHOWED UP , NEED TO ORDER AND REPLACE LEVEL SENSOR AT NEXT SERVICE

2013-05-09-MATTHEW BIAMONTEWASH TRUCK FOR PM SERVICE, DO INITIAL TRUCK INSPECTION, FOUND STEERING BALLSTUDSNEED REPLACEMENT, ALL 8, ORDER NEW CYL, WIPER SEAL PUSHED OUT AND LEAKING

2013-05-11- STEERINGMATTHEW BIAMONTEREPLACE STEERING CYL L/H AND R/H SIDE WITH NEW, REPLACE BALLSTUDS STEER CYLS ANDINSIDE TRAILING LINKS

2013-05-12-STEERINGMATTHEW BIAMONTEINSTALL REMAINING BALLSTUDS IN MACHINE, REPLACE GREASE CONTROLLER, REPLACE ENGINE OILLEVEL SENSOR

2013-05-12- STEERINGRYAN ELLISCHANGE 2 OUTSIDE BALL STUDS AND TORQUE TO CAT SPEC, GREASE ALL BALLSTUDS, HAD TOBUILD A WEDGE TOOL TO BREAK STUDS FREE

2013-05-20-SCOTT MCLENNANTRAVEL TO UNIT, TROUBLESHOOT UNIT NOT GOING INTO GEAR, FOUND CONNECTOR AT TRANSLOOSE, TIGHTENED , TESTED FOR FUNCTION, UNIT UP

2013-06-04- ENGINERYAN ELLISPULLED VACCUM ON A/C, RECHARGED, COMPRESSOR SOUNDED LIKE IT WAS STARTING TO SIEZE,ORDERED NEW PARTS

2013-06-04- AIR CONDITIONINGINSPECT FOR COMPLAINT OF NO AC, FOUND LOW CHARGE IN SYSTEM, TOP UP AND TEST, BLOWINGCOOL, COMPRESSOR INTERMITTENTLY SLOWING DOWN, COULD BE STARTING TO SEIZE UP, WILLORDER OIL TO TOP UP SYSTEM AND RECEIVER DRYER

2013-06-09- ELECTRICALRYAN ELLISCHECK FOR POWER TO ALARM THERE WAS 24V, PICKED UP OLD ALARM OUT OF MATTS TRUCK ANDINSTALLED, REMOVE SEAT TO INSPECT BASE FOUND WAS BROKEN AGAIN AND SEAT BASE WAS

Page 7 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

BROKEN, ORDERED NEW SEAT BASE

2013-06-10- ENGINERYAN ELLISREMOVE AIR FILTERS AND BLEW OUT, CLEANED PRECLEANERS

2013/06/25 OTHERSCOTT MCLENNANPERFORM INSPECTION, REPAIR REAR SEAT SLIDES

2013/06/25 OTHERTREVOR VUNLOCK AND WIGGLE SEAT, FOUND RELEASE NOT WROKING CORRECTLY ON RIGHT HAND SIDE,PARTS HAVE BEEN ORDERED

2013/07/09 OTHERTREVOR VMOVE UNIT TO 211 RAMP, HAD TO WAIT FOR SHOVEL MOVE ON HAUL ROADS

2013/07/14TREVOR VHELP SCOTT WIITH SEAT INSTALL TRIM BASE TO FIT PROPERLY IN CAB. REPAIR GREASE LEAK ONGREASE TANK FILL LINE

2013/07/11 OTHERSCOTT MCLENNANBEGIN INSPECTION TO UNIT. TRAVEL TO TRAILER TO FIND ANT PARTS MARKED FOR UNITS ATLAYDOWN. REPAIR LOOSE HAND RAILS. STRAIGHTEN STEPS

2013/07/13 OTHERTREVOR VFINISH OFF INSPECTIONS AND OIL SAMPLES

2013/07/14 OTHERSCOTT MCLENNANINSTALL NEW SEAT BASE IN UNIT. NEW SEAT BASE DIFFERENT THAN EXISTING. PUT NOTCHES INORDER TO CLEAN MOUNTS. NEW BASE HAD DIFFERENT STYLE AIR LINE COULERS. TRAVEL TO SHOPTO PICK UP COUPLERS.

2013/07/21 ELECTRICALSCOTT MCLENNANT/S WIPER NOT WORKING. FOUND MOTOR TO BE FAULTY. ORDERED NEW MOTOR. REPLACED BLOWNHEADLIGHT.

2013/07/23 ELECTRICALSCOTT MCLENNANINSTALL WINDOW WIPER MOTOR. WASH TRUCK. CLEAN OUT TOOLS. DROP OFF TRUCK.

2013/07/29 - 8159 - HYSCOTT MCLENNANTRAVEL TO UNIT. REPLACE HOIST CYL HOSE

2013/08/05 - HYMATTHEW BIAMONTEHYDRAULIC LINE BLEW FOR HOIST CIRCUIT. BUILD LINE. REMOVE AND REPLACE. GOT LUBE TRUCKTO FILL UP

2013/08/16 - 8619 - OT BCRON DREPARIRED SEAT BELT. REPAIRED LOOSE, MISSING BOLTS AT SEAT BASE. CHECKED OVER

2013/08/28 - HC - 8424TREVOR VPREP UNIT FOR REPAIR CHIP AWAY MUD. HOIST AND PIN BOX REMOVE GREASE LINES REMOVE IHHOIST CYL UPPER PIN AREA

2013/09/29 SL-8503TREVOR VPREFORM 2000HR BRAKE AND STEERING TEST

2013/09/04 TA-OT-8425ROB GREASE BLOCK AND FITTING FROM EXE055 UNIT AT 211 RAMP. INSTALL ON TO RDC049. TESTOK, CYCLE GREASER MULTIPLE TIMES TO LUBE ALL GREASE POINTS WELL. START UP AND CHECKOVER FOR CUSTOMER UNIT WAS PUT TO WORK RIGHT AWAY.

2013/09/02 OT-TA-8424TREVOR V

Page 8 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

TROUBLESHOOT GREASE SYSTEM. CHECK OHMS AND VOLTAGE AT DUMP VALVE CHECK FELIEF FORBY PASSING. CHECK DUMP VALVE IS HANGING UP BYPASSING GREASE HAVE TO ORDER PARTS.COULD NOT GET TO UNSTICK.

2013/09/01 HC-OT-TA-8424TREVOR VINSTALL NEW SEAT BELTS AND COVERS. FINISH LH HOIST CYL INSTALL, TEST FOR LEAKS, BLEEDAIR FROM NEW CYL. START TROUBLESHOOTING OF LUBE SYSTEM ONLY BUILDING 500 PSIPRESSURE.

2013/10/14 OT-26073SCOTT MCLENNANCOLD START AND CHECKOVER UNIT, RUN ALCOHOL THROUGH AIR SYSTEM.

2013/10/09 OTSCOTT MCLENNANASSIST TIREMAN IN TIRE C/O. TRACK DOWN SPARE TIRE AND RECORD SERIAL NUMBERS.

2013/12/09-EL-9181RON DUYVEWAARDTCHECKED WIRING AND CONNECTIONS. LIGHTS ON COPONENT BEHIND CAB BLINKING. FOUNDANTENNA WAS LOOSE.

2013/12/12-EL-9255RON DUYVEWAARDTREPLACE LEFT HEADLIGHT BULB. INSTALL WINTER FRONT

2013/12/15-EL-9307RON DUYVEWAARDTDIAGNOSING TRANS NOT GOING INTO GEAR. CONNECTED ET, TRANS GEAR POSITION SENSOR NOTSENDING TO ECM. INSTALLED SENSOR FROM RDC030. STILL NOT READING. CHECKING HARNESS,TRUCK STILL DOWN.

2013/12/16-EL-9334RON DUYVEWAARDTREPAIR BRAKE TEMP SENSOR HARNESS. ORDER MONITOR FILM

2013/12/16-TR-9318MATTHEW BIAMONTEWOULD NOT SHIFT INTO GEAR. FOUND JUMPER HARNESS TO TRANSMISSION SWITCH FAULTY, SENDREGISTRATION AGAIN.

2013/12/17-EL-9351RON DUYVEWAARDTREPLACE MONITOR FILM

1-Jan-2013 WOC210885 - BRAKE AND STEERING TEST 8,503.

18-Dec-2012 WOC172909 - BI-WEEKLY DEC 18 - JAN 01, 13 6,023BI - WEEKLY DEC 19 - JAN 01, As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC13

18-Dec-2012 WOC170807 - 2000HR SERVICE 6,345CARRY OUT 2000HR SERVICE AND REPAIRS AS REQUIRED

ENGINE HOURS:

DATE:

SERVICE CARRY OUT BY:

MAGNETIC PLUG REPORT

LHF/FD:RHF/FD:F/DIFF:LHR/FD:RHR/FD:R/DIFF:

ALL DEFECTS ENTERED INTO GP.

2013-01-09 - 2000 HR SERVICEMATTHEW BIAMONTESERVICE

Page 9 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

4-Dec-2012 WOC169979 - BI-WEEKLY DEC 05 - DEC 18, 12 6,023BI- WEEKLY DEC 05 - DEC 18, 1As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC2Customer installed the heater motor , wheel and resistor.No B/C

1-Dec-2012 WOC169403 - RIGHT SIDE LIFT CYL LEAKING 6,024RHS box lift cylinder leaking

DEC 1/12 MATTHEW BIAMONTE

REPLACE RH HOIST CYLINDER, ONE INSTALLED WAS NFG

26-Nov-2012 WOC162413 - 1750HR SERVICE 6,010CARRY OUT 1750HR SERVICE AND REPAIRS AS REQUIRED

ENGINE HOURS:

DATE:

SERVICE CARRY OUT BY:

MAGNETIC PLUG REPORT

LHF/FD:RHF/FD:F/DIFF:LHR/FD:RHR/FD:R/DIFF:

ALL DEFECTS ENTERED INTO GP.

21-Nov-2012 WOC167117 - BI-WEEKLY NOV 21 - DEC 04, 12 5,804BI-WEEKLY NOV 21 - DEC 04 - 2As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC012

6-Nov-2012 WOC163789 - BI-WEEKLY NOV 07 - NOV 20, 12 5,804BI-WEEKLY NOV 07 - NOV 20, 12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC

NOV 27/12 MATTHEW BIAMONTE

REMOVE AND REPLACE RIGHT HAND HOIST CYLINDER, DRIVE TO EDSON

NOV 29/12 MATTHEW BIAMONTE

250HR SERVICE

27-Oct-2012 WOC177549 - FIRE SUPPRESSION RECERT 6,458ALWAYS ADD 17,554 HRS TO F/S. HR METER CHANGED OUT AT THOSE HRS.

PERFORM 1200HR FIRE SUPRESSION INSPECTION

COMPLETED BY ODIE MECHANICAL

23-Oct-2012 WOC160736 - BI-WEEKLY OCT 24 - NOV 06, 12 5,457BI-WEEKLY OCT 24 - NOV 06, 12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC

OCT 24/12- MATT BIAMONTE

500HR SERVICE

OCT 24/12- CHRIS RODGERSON

PICK UP FILTERS KITS AT FINNING AND DRIVE OUT TO WHITEWOOD MINE AND COMPLETE A 500 HR SERVICE

22-Oct-2012 WOC155601 - 500HR SERVICE 5,760

Page 10 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

CARRY OUT 500HR SERVICE AND REPAIRS AS REQUIRED

ENGINE HOURS:

DATE:

SERVICE CARRY OUT BY:

MAGNETIC PLUG REPORT

LHF/FD:RHF/FD:F/DIFF:LHR/FD:RHR/FD:R/DIFF:

ALL DEFECTS ENTERED INTO GP

9-Oct-2012 WOC157292 - BI-WEEKLY OCT 10 - OCT 23, 12 5,457BI-WEEKLY OCT 10 - OCT 23, 12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC

OCT 11/12- MATT BIAMONTE

PULL SAMPLES FROM TRANS OIL AND HYD OIL SAMPLE LH FRONT HUB AND REPLACE OIL CHARGE STRUTS ON TRUCK AS THEY WERE LOW

25-Sep-2012 WOC154878 - BI-WEEKLY SEPT 26 - OCT 09, 12 5,457BI-WEEKLY SEPT 26 - OCT 09, 1As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC2

11-Sep-2012 WOC152827 - BI-WEEKLY SEPT 13 - SEPT 26,12 5,277BI-WEEKLY SEPT 13 - SEPT 26,1As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC2

SEPT 20/12-MATT BIAMONTE

1000HR SERVICE TIRE REPORT

SEPT 20/12- CHRIS RODGERSON

COMPLETE 1000HR PM AND TIRE REPORT, AIR DRIER DESECANT WAS BACK ORDERED SO WAS NOT REPLACED

29-Aug-2012 WOC150625 - BI-WEEKLY AUG 29 - SEPT 12, 12 5,213BI-WEEKLY AUG 29 - SEPT 12, 1As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC2

15-Aug-2012 WOC148725 - BI-WEEKLY AUG 15 - AUG 28, 12 5,158BI-WEEKLY AUG 15 - AUG 28, 12

AUG 17/12- CARL LEATHERS

TAKE TRUCK TO TITAN FOR TIRES, CLEAN CAB

AUG 21/12- MATTHEW BIAMONTE, CHRIS RODGERSON

performed 250 hr service because only 250hr kits were ordered

31-Jul-2012 WOC146731 - BI-WEEKLY AUG 01- AUG 14, 12 5,000BI-WEEKLY AUG 01- AUG 14, 12

17-Jul-2012 WOC144493 - BI-WEEKLY JULY 18 - 31, 2012 5,000BI-WEEKLY JULY 18 - 31, 2012

JULY 30/12- CHRIS RODGERSON

Replace the transmission oil and filters and checked the screens and found no sign of iron as the oil sample came back with higher than normal iron content.

Will resample in 100 hrs

Page 11 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

4-Jul-2012 WOC142446 - BI WEEKLY WORK ORDER 4,61904/07/12 to 17/07/12

JULY 9/12 - CHRIS R

COMPLETE A 750 HR SERVICE, CHANGE THE FRONT HUB OILS (A LITTLE OVER FULL)

20-Jun-2012 WOC140193 - BI-WEEKLY WORK ORDER 4,619Bi-Weekly Work Order 20-06-12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC to 03-07-12

19-Jun-2012 WOC140073 - CHECK PARK BRAKE UPDATE 4,619CHECK FOR CORRECT VALVE ON PARK BRAKE UPDATE

5-Jun-2012 WOC137937 - BI-WEEKLY JUN 06 - JUN 20, 12 4,517BI-WEEKLY JUN 06 - JUN 20, 12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CCJUNE 15/12-CECIL/DAVE

500HR PM, REPAIRED 2 BROKEN GREASE HOSES ON LEFT STERING CYLINDER PUMP VALVE ON GREASE PUMP NOT WORKING NEW ONE ORDERD, BOTH FRONT HUBS OVERFULL, RH STEERING CYLINDER BALL STUD IS LOOSE ON BASE END, AIR CYLINDER FOR PARK BRAKE RELEASE VALVE SHOULD BE RESEALED LEAKING

22-May-2012 WOC135064 - BI-WEEKLY MAY 23 - JUNE 05, 12 4,369BI-WEEKLY MAY 23 - JUNE 05, 1As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC2

16-May-2012 WOC134317 - REPLACE FRONT TIRES 4,369Tires over the 5000 hr limit

MAY 29/12-LEVITT

REPLACE FRONT TIRES, TIRE OVER 5000HR

8-May-2012 WOC133804 - BI-WEEKLY MAY 09 - MAY 22, 12 4,369BI-WEEKLY MAY 09 - MAY 22, 12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC

MAY 15, 12 - CHRIS R

250 HR PMCOMPLETE A 250HR SERVICE AND TAKE MORE SAMPLES OF THE FRONT WHEEL HUBS

MAY 15/12- CHRIS RODGERSON

STEAM CLEAN, ENTIRE MACHINE, CLEAN DIRT COLLECTORS ON AIR, FILTER HOUSING, CHANGE ENGINE OIL, CHANGE ENGINE OIL FILTERS, CHANGE THE FUEL FILTERS, CHECK OPERATION OF ENGINE SHUTDOWN, CHECK COMPRESSOR CUTOUT PRESSURE, 120PSI, CHECK ENGINE AIR INTAKE SYSTEM FOR LEAKS, CHECK ALL COOLANT HOSES FOR LEAKS AND WEAR, CHECK FOR LEAKS AFTER STARTUP, CLEAN BATTERIES AND TERMINALS, BATTERY ELECTOLYTE LEVELS, ELECTROLYTE SPECIFIC GRAVITY, ADJUST ALTERNATOR BELT, CHECK CAB HEATER AND DEROSTER FOR PROPER OPERATION, GROUND STRAOS BETWEEN FRAME CAB AND ENGINE, CHECK DASH LIGHTS, SWITHCHES, GUAGES, CHECK CLEARANCE LIGHTS AND MIRRORS, ENSURE BOX UP LIMIT BYPASS IS OPERATIONAL CHECK BACK UP ALARM, CHECK EMERGENCY STEERING, INSPECT STEERING CYLINDER, INSPECT THE KING PINS, INSPECT TIE ROD ENDS, INSPECT PITMAN ARM LINKAGE, GREASE DRIVE & U JOINTS, CHECK AUTO LUBE SYSTEM & GREASE LINES, CHECK DRIVE SHAFT FOR DAMAGE, CHANGE TRANSMISISON FILTERS, CHECK OPERATIONS OF TRANSMISSION RETARDER, CHECK TRANSMISSION COOLER HOSES FOR LEAKS AND WEAR, CHECK TRANSMISSIONS FOR OIL LEAKS AFTER START UP, CHANGE THE STEERING FILTER, CHECK TIE ROD ENDS, KING PINS AND FRONT WHEEL BEARINGS FOR LOOSENESS & LUBE, CHECK STEERING STOPS FOR ADJUSTMENTS, CHECK FOR AIR LEAKS, CHECK FOR OPERATIONS OF PARK BREAK, CHECK TREADLE VALVES FOR AIR LEAKS, CHECK BREAK VALVES ON DASH FOR PROPER OPERATION, CHECK BREAK LINING WEAR & DRUM CONDITIONS, CHECK BREAK PADS (FRONT), CHECK DIFFERENTIAL PINION SEALS FOR LEAKS, CLEAN BREATERS ON REAR DIFFERENTIAL, DRAIN AIR TANKS, CHECK OIL LEVEL IN REAR PLANETARIES, EP 80W/90 OIL, CHECK CAB MOUNTING, CHECK FRAME FOR CRACKS, CHECK FIRE EXTINGUISHER, CHECK WHEEL NUTS FOR TIGHTNESS, CHECK ALL TIRES FOR CUTS & WEAR, FILL ALCOHOL VAPORIZER, CHECK THE BOX HYDRAULICS, CHECK OPERATOR'S SEAT, CHECK HEIGHT ADJUSTMENT ON SUSUPENSION CYLINDERS, ENSURE ALL FILLER CAPS IN PLACE, ENGINE , TRANSMISSION FRONT HUBS

30-Apr-2012 WOC132987 - F/S RECERT 4,255

Page 12 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

Yearly recertification - odie mechanicalInterface module has to be replaced

APR.20.2012-OODIE MECHANICALFIRE SUPRESSION RE CERTIFICATOIN

24-Apr-2012 WOC132315 - BI-WEEKLY APR 25 - MAY 08, 12 4,255BI-WEEKLY APR 25 - MAY 08, 12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC

11-Apr-2012 WOC131123 - BI-WEEKLY APR 11 - APR 24, 12 4,105BI-WEEKLY APR 11 - APR 24, 12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC1000 hr serviceChanged supplemental steerin pump and motor assembly

APR 17.2012- CHRIS R COMPLETE A 1000 HR SERVICE AND DIAGNOSE A EMERGENCY STEERING PROBLEM ( MOTOR BURNT UP)

29-Mar-2012 WOC129304 - BI-WEEKLY MAR 28, - APR 10, 12 3,815BI-WEEKLY MAR 28, - APR 10, 1As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC2

APR.5.2012-RENE K DRIVE TO AND FROM WHITEWOOD MINE,

APR.5.2012-CHRIS RDRIVE TO AND FROM WHITEWOOD MINE

15-Mar-2012 CME135 - CHANGE OUT TRANSMISSION 3,964OVER HOURED COMPONENT CHANGE OUTUSED OUR TRANSMISSION FROM STOCK PSC018

APR.5.2012-RENE KFINISH HOOKING UP TRANS FILL WITH OIL,REPLACE FILTERS

15-Mar-2012 CME136 - CHANGE OUT DIFFERENTIAL 3,964OVER HOURED COMPONENT CHANGE OUT

CHANGED OUT DIFFERENTIAL BEFORE FAILURE, USED OURS FROM STOCK - PSC017

APR.5.2012-RENE KFILL THE FINAL DRIVES WITH OIL-ADJUST THRUST PIN

14-Mar-2012 WOC126598 - BI-WEEKLY MAR 14 - MAR 27, 12 3,784BI-WEEKLY MAR 14 - MAR 27, 12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC

MAR 20,2012-DARRELL F GO TO OFFICE LOOK INTO PARTS AND SERVICE PARTS.CHANGE OUT DAMAGED PARTS WITH NEW.

27-Feb-2012 WOC123866 - BI-WEEKLY FEB 29 - MAR 13, 12 3,815BI-WEEKLY FEB 29 - MAR 13, 12

MAR 1, 2012 - DARRELL FHELP WITH 500 HR SERVICE.

14-Feb-2012 WOC122305 - BI-WEEKLY FEB 15 - FEB 22, 12 3,538BI-WEEKLY FEB 15 - FEB 22, 12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC

1-Feb-2012 WOC120450 - BI-WEEKLY FEB 02 - FEB 14, 12 3,296BI-WEEKLY FEB 02 - FEB 14, 12As per discussion with Chris McNeil & Julio, these won is to be closed.30/4/13 CC

25-Jan-2012 WOC118814 - S S STEERING MOTOR SHORTED 3,296Steering motor - eleetrical shortPark brake air cylinder seal kit

6-Jan-2012 WOC115224 - PARK BRAKE STICKING 3,269

Page 13 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

Park brake will not release all the time - mostly when cold.

3-Jan-2012 WOC114662 - 1000 HR SERVICE 3,2961000 hr service

JAN 5, 2012 - Replace engine, transmission, and hub oilsReplace all oil, air and breather filtersCheck that all points receiving grease and that there is no significant wear on any parts because the greaser hasn't been working since the 5th of December.

Replace the grease pump solenoid valveReplace the heater fan motorComplete a 1000hr work sheet

8-Dec-2011 WOC110867 - REPLACE GREASE SYSTEM VENT 2,759Replace vent blockReplace mining lights

DEC 8, 2011 - DARRELLREPLACE GREASE SYSTEM BLOCK. REPLACE MISSING/BROKEN MINING LIGHTS.

16-Nov-2011 WOC107883 - 750 HR SERVICE 2,759&50 service Prairie mines

NOV 16, 2011 - CHRIS/DARRELREPLACE ENGINE OIL FILTERS, AIR FILTERS, BLEW OUT THE CAB FILTERS AND COMPLETED A MULTI POINT INSPECTION SHEET. WE ALSO NOTICED THAT THE GUAGE ON THE GREASER WAS HOLDING PRESSURE WHICH INDICATES THAT THE VALVE NEEDS TO BE REPLACED. THERE DOESN'T SEEM TO BE ANY LEAKS AND THE TRUCK LOOKS TO BE IN GOOD SHAPE.

25-Oct-2011 WOC105252 - RHF STEP MISSING 2,365Back charge

OCT 25, 2011 - MISSING RIGHT FRONT STEP

NOV 8, 2011 - DARRYLPUT TOGETHER AND INSTALL RIGHT FRONT STEP.

6-Oct-2011 WOC102823 - 500 HR PM 2,132250 hr pm completed at highvale mine.

OCT 12, 2011 - 250 HR SERVICE - DARRYL FEDORUK250 HR SERVICE SEE SHEETChange vent valve on grease system

3-Oct-2011 WOC102323 - INSTALL BLOCK HEATERS 2,132Install 120V block heater system

OCT 3, 2011 - INSTALL BLOCK HEATERS - DARRYL

OCT 12, 2011 - INSTALL BLOCK HEATER - DARRYLDRAIN COOLANT, INSTALL BLOCK HEATERS, FILL AND TEST.

27-Sep-2011 WOC101624 - BLOWN HYD HOSE 1,635Blown hyd hose in the hoist circuit.Closed as per instructions, hours unknown CC 26/03/2013

12-Sep-2011 WOC00986 - PARK BRAKE WILL NOT RELEASE 1,932park brake will not release - takes between 15 min and 1 hr.

SEPT 12, 2011 - PARK BRAKE - DARRYL FEDORUKTALK WITH OPERATOR. CHECK AIR SYSTEM. CHECK THAT BRAKE PRESSURE TO FRONT WHEEL BRAKES IS DROPPING OFF. BUILDS VERY GOOD AIR PRESSURE. BRAKE PRESSURE APPLIED WAS 1000 PSI IDLE AND 1250 PSI FULL RPM.

29-Aug-2011 WOC00795 - 250 HR SVC 1,891250 hr svc @ 1891 hours on Sept. 7, 2011

1-Aug-2011 WOC00399 - 2000 HR PM 1,6352000HR PM SERVICE AT P MINE

TO BE PICKED UP IN THE AM IN EDMONTON.

AUG 2 - 3 ,2011 - 2000 HR PM SERVICE - DARRELLDO SERVICE. FIX FRONT LOW BEAM. TAKE OIL SAMPLES.

19-Jul-2011 WOC00269 - C/O TRANS HOSES 1,518

Page 14 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

Change out Trans hoses from filter

JULY 19, 11 - TRANS LEAK - DARRELLCHECK ON LEAK. FOUND HOSES THAT GO TO TRANS FILTER HAD RUBBED THROUGH.

JULY 20, 11 - TRANS LEAK - DARRELLINSTALL TWO NEW HOSES ON TRANS FILTER HOUSING AND FILL UP TRANS TANK AND TEST FORLEAKS.

7-Jul-2011 WOC00152 - REPAIR EMERGANCY STEER 1,518Repair Emergany Steer leaking.

JULY 20, 11 - LEAKING EMERGENCY STEERING PUMP - DARRELLREMOVE PUMP FROM UNIT. INSTALL SEAL KIT. RE-INSTALL ON UNIT AND TEST FOR LEAKS.

5-Jul-2011 WOC00123 - 500 HOUR SERVICE AND MECH CHEC 1,021Carry out 500 hour service and mech checkWork to be carried out on site at Whitewood

27-Jun-2011 WOC00058 - 1200 HR FIRE SUPPRESSION PM 1,0211200 hr fire suppression PMClosed as per instructions, hours unknown CC 26/03/2013

8-Jun-2011 WOC98266 - 250 HOUR SERVICE 1,021DARRYL TO PERFORM 250 HOUR SERVICE AT PRAIRIE MINES ON JUNE 9, 2011

8-Jun-2011 WOC98250 - TROUBLE SHOOT NO START 1,021Truck wouldnt start?

26-May-2011 WOC97037 - REPAIR LEFT FRT WHEEL BEARING 881REPAIR LEFT FRONT WHEEL BEARING REFERENCE TO WO# 75723 OPENED TO COVER COSTS FOR wo 75723 AS PO NOT ACCEPTING INTO SYSTEM

20-May-2011 WOC96428 - REPLACE SEAT BELT 961Replace Seat Belt and Fire Extinguisher

MAY 26, 11 - DAVE'S DIESEL REPAIRREPLACE FIRE EXTINQUISHERS ON UNIT BECAUSE DO NOT HAVE TAGS ON THEM FOR INSPECTION. HAD TO GO BACK TO MACHINE BECAUSE NEW ANSUL FIRE EXTINQUISHERS WERE NOT CERTIFIED, HAD TO PUT OLD ONES BACK ON.

REMOVE PASSENGER SEAT BELT AND REPLACE AND MARK DATE TAG WHEN INSTALLED AND HAD TO LOOK UP DRIVERS SEAT BELT PARTS. SEAT BELT SUPPLIED FOR DRIVERS SEAT WAS WRONG AND DOES NOT WORK. LOOKED UP PART AND PHONED FRANK AND GIVE PART #280-8111.

MAY 30, 11 - DAVE'S DIESEL REPAIRREMOVE AND INSTALL NEW DRIVERS SEAT BELT ASSEMBLY, OLD ONE DOES NOT WORK.

12-May-2011 WOC95308 - 1000 HOUR PM 17,903PERFORM 1000 HOUR PM

7-Apr-2011 WOC90497 - 750 HOUR SERVICE 17,903750 hour service Changed engine oil and filters. Sampled all compartments. Changed transmission filters. Changed hydraulic filters. Changed steering filters. Changed fuel filters. Changed all air filters. Replaced leaking hydraulic hose. Replaced heater climate control cable.

8-Mar-2011 WOC86370 - 500 HOUR SERVICE. 17,903500 Hour Service. Done by John at Whitewood.

16-Feb-2011 WOC83869 - CHANGE WATER VALVE. 17,651Change water valve.

27-Jan-2011 WOC81931 - PARK BRAKE LIGHT ON. 17,599Park brake light on. Tested park brake release pressure. Spec is 650 PSI at high idle. Machine read 650. Test drove machine. Brakes worked correctly and was able to Feather them. Replaced park brake switch, but light stayed on. Tested all harnesses and connections. All wiring was good. Found that machine was not sending a signal from the monitor to the switch Switched monitors with the other truck, and confirmed the monitor was bad. Travel home. Travel to site. Removed old cat cms and sticker. Installed sticker on new cms. Installed dash. New monitor has to be flashed by Cat dealer.Travel to site. Do JHA. Dissassembled dash and disconnected monitor. Reattached old monitor and tried to communicate with machine. Found that on start up the screen display showed the brake, transmission, and monitoring system were programmed as a 771 instead of a 777D. Engine ECM was programmed as a 777D. Couldn't completely communicate with machine as it would lose communications with ECMs. When new monitor was hooked up, couldn't communicate at all with machine. Travelled back to base.John Garley from Finning went back out and found he'd used the wrong wire to flash the dash. Reflashed and it worked fine.

Page 15 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

27-Jan-2011 WOC81928 - LHS DUO-CONE SEAL LEAKING. 17,634LHS duo-cone seal leaking. Gathered parts and supplies, travelled to site and do JHA. Moved and positioned truck in bay. Removed tire and adapted air to tank. Steamed off hub and brake. Applied brake several times and found leak coming from cover. O-ring was missing off plug. Reinstalled plug with new o-ring and filled hub with 8 litres oil. No leaks.

21-Jan-2011 WOC81384 - RIGHT HAND REAR WHEEL GROUP 17,599Change out R/H/R Wheel groupRebuilt by Finning Emeco Exchange unit used

Travelled to site and performed JHA for the job required. Drained all the oils out of both rear final drives and the rear diff. Drained the oil out of the hydraulic tank. Jacked up truck and set on stands. Removed the axles from both rear final drives. Unloaded the new wheel groups off of Dennis' trailer and then waited for Kal Tire to show up and remove the rear wheels. Kal Tire couldnt get their manipulator into place and the on site wheel loader broke down. The wheel loader was not able to be repaired until the next day. Talked to the on site contact about the situation. Travelled back from the site to the Edmonton shop. Removed diff to wheel group mount bolts. Removed RHS wheel group and prepped it for transport. Picked up parts and travelled back to work site. Did JHA. Installed RHS wheel group on machine. Torqued bolts to 774 ft.lbs. Filled diff with 222 litres of oil. Installed both axles. Had some difficulty getting axles in for lack of correct tools. Installed all lines. Installed speed sensor. Installed new sun gears. Filled final drives with 42 litres each. Filled brake cooler tank with 504 litres of 10 weight. Bled the brakes. Installed inner rear tires. RHS tire valve stem got broken off during install. Measured brakes and found LHS side rear to be .266 of travel. RHS was .249 of travel. Park brake warning light stayed on. Cleaned up area and travel home.Took temp readings on all brakes. Front LHS-34 C. Front RHS-37C. Rear RHS-39C. Rear LHS-38C. No brake drag. Parked machine back inside. Talked to contact and drove back to shop.

Ended up being shipped to Kamloops for repair.

21-Jan-2011 WOC81383 - LEFT HAND REAR WHEEL GROUP 17,599Changeout wheel group Recond by Finning Emeco Exchange unit used Removed LHS wheel group and set it out of the way. Cleaned mounting surface and mounted exchange wheel group. Had major difficulty installing group as the wheel loader was to small for the job and ice was built up around the bay door.Washed wheel group. Dissassembled wheel group hub, spindle, and washed brake. Marked housings, evenly let off spring tension from piston, removed piston and housing, cleaned and measured all friction discs and plates and dampners for warpage and thickness. Spec for friction disc is .200 plus or minus .003. Spec for discs is .0950 plus or minus .0025. Spec for dampner is .270 plus or minus .010. No warpage or major wear apparant.Thickness of discs- .091,.091,.091,.092,.092,.092,.092,.093,.094,.091,..093,.093,.093

Thickness of friction discs-.195,.194,.196,.195,.196,.197,.199,.197,.197,.198,.198,.198,.198,.197,.197. Thickness of dampners-.243Disassembled piston and housing, cleaned and marked springs. Measured and marked spring free length.Inner springs->464-.486. Spec is .547. Outer springs-.566-.598. Spec is .590.Ordered parts. Discarded old seals, bearings, and sun gears. Removed planet gears with press. Etched parts for maintenance program.Removed planet gear bearings. Installed new bearings and spacers in planet gears.Moved carrier to press and pushed in all three pins. Cleaned cover, installed new o-ring and axle thrust plate. Torqued mount bolts to 35 ft.lbs.

Ended up being shipped to Kamloops for repair.

12-Jan-2011 WOC80179 - BRAKES NOT RELEASING. STEERING 17,555Brakes not releasing. Supplimental steering not working. Checked levels. Started truck, released park brake and found that brakes were dragging on driving into the shop. Drained air tank, removed lines, poured air line antifreeze into tank and service lines. Started truck and cycled service and park brake. Park brake now releases properly. Drove truck and service brakes also worked correctly. Customer complained of secondary steering not working right, so tested solenoid which worked. Motor had 25 volts at contact, but did not turn. Cleaned all contacts, motor had a resistance of 4.5 kohms. Installed new motor. Tested steering and it worked good. Started truck and released park brake with no problem. Drove to RDC024 and read code with laptop. Found cylinder #4 injector was throwing an intermittant code. Did a cylinder cutout test, and engine changed on all cutouts. Ghost code. Sent machine back to work.

5-Jan-2011 WOC79264 - CHANGE SUSPENSIONS 17,553Charge suspensions. Tire report. Check brakes. Remove small mirror. Checked brakes. Right side front-.071 travel. Left side front-.064 travel. Right side rear-.012 travel. Left side rear-.0195 travel.

4-Jan-2011 WOC79173 - COLD START MACHINE 17,552

Page 16 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

START MACHINE TO LOAD OUT

FIRE UP MACHINE TO LOAD

NO OTHER INFO.

24-Dec-2010 WOC78453 - 1200 FIRE SUPP 17,548levitt did a 1200 fire supp.

NOV 21, 10 - LEAVITT1200 PM INSPECTED HOSES, INSPECTED WRING, GREASED AND TESTED ACUTATORS. BLEW LINES, REPLACED CAPS, CHECK IRS, FLAME TESTED IRS.SHUT DOWN NEEDS TESTING.

DEC 24, 10 - LEAVITTCOMPLETION OF 1200HR PM . CHECK HOSES/NOZZLES, FITTINGS. CHECKED ACTIVATION HEAD, TESTED ENGINE SHUTDOWN. SYSTEM OK.

19-Dec-2010 WOC77825 - REPLACE HYD HOSES 17,534changed hyd hoses

DEC 19, 10 - INSTALL HYDRAULIC HOSES - LUCASWROTE JHA. INSTALLED HOSES ONTO HYDRAULIC COOLER WITH NEW O-RINGS ON HOSES. CONNECTED VARIOUS HYDRAULIC HOSES ON TRANS PUMP AND GEAR PUMP. NEW O-RINGS USED ON ALL FITTINGS. INSTALLED MAIN DRIVESHAFT ONTO TORQUE CONVERTER. TORQUED SPIDER BOLTS TO 200 FT LBS AS PER OEM SPECS.

DEC 19, 10 - BILLHOOK UP TORQUE HOSES.

16-Dec-2010 WOC77368 - WASH TRUCK 17,534wash truck for comp. change out

DEC 20, 10 - CLEAN OUT BOX - BILLMOVE UNIT TO YARD. RAISE BOX AND SCRAP DIRT OUT OF BOX.

16-Dec-2010 WOC77327 - CHANGE OUT HMU 17,534Change hand metering unit, return core

DEC 18, 10 - REPLACE HMU - LUCASWROTE JHA. REMMOVED ACCESS PANEL, WINDSHIELD WIPER MOTOR AND ASSOCIATED BRACKETS. REMOVED OLD HMU FROM MACHINE, TRANSFERRED HYDRAULIC FITTINGS ONTO NEW HMU AND INSTALLED NEW O-RINGS ON FITTINGS. INSTALLED NEW HMU ONTO MACHINE. REINSTALLED HYDRAULIC LINES, WINDSHIELD WIPER MOTOR AND ASSOCIATED BRACKETS. REINSTALLED ACCESS PANEL.

15-Dec-2010 WOC77269 - R & I TORQUE CONVERTER 17,534R & I TORQUE CONVERTER

DEC 18, 10 - REPOWER - BILLSWAP TORQUE. REMOVE OLD TORQUE AND INSTALL NEW TORQUE ON NEW ENGINE. HAD TO DIG TORQUE OUT OF TENT.

15-Dec-2010 WOC77262 - R & I SCAVANGE PUMP 17,534R & I SCAVENGE PUMP

DEC 20, 10 - REPLACE SCAVANGE PUMP - BILLREMOVE SCAVENGE PUMP FROM TORQUE AND REPLACE WITH NEW REBUILD. HOOK UP LINES AND INSTALL BACK INTO MACHINE.

15-Dec-2010 WOC77265 - 2000 HR PM SERVICE 17,5342000 HR PM SERVICE

15-Dec-2010 WOC77268 - R & I ENGINE 17,534

Page 17 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

R & I ENGINE

DEC 17, 1`0 - REPOWER - BILLREMOVE AND TAG WIRES AND HOSES. REMOVE ENGINE, CLEAN BAY.

DEC 18, 10 - BILLSWAP ENGINE PARTS. ORDER MISSING PARTS.

DEC 19, 10 - BILLFINISH DRESSING ENGINE AND INSTALL IN FRAME. HOOK UP ENGINE HOSES.

DEC 20, 10 - BILLSWAP ENGINE AND HOSES AS NEEDED.

DEC 22, 10 - BILLPERFORM ENGINE STARTUP WITH FINNING.

DEC 23, 10 - FINNINGTOP UP ALL FLUIDS. TRY TO TURN KEY ON, BUT FOUND OUT NO POWER TO KEY. T/SHOOT ANDFOUND WIRE ON ENGINE WAS NOT HOOKED UP. PERFORM DRY START AND FOUND LEAK ON LINEGOING TO TORQUE. FIX LEAK AND FIRE UP UNIT. CHECK FOR LEAK, DID NOT FIND ANY LEAK.RELEASE UNIT TO CUSTOMER.

15-Dec-2010 WOC77267 - R & I RADIATOR 17,534R & I RADIATOR

DEC 20, 10 - INSTALL RADIATOR - LUCAS, AARONWROTE JHA. INSTALLED FRAME CROSS MEMBER. BENT BACK RADIATOR SHROUD MOUNT (DAMAGED DURING SHIPPING). INSTALLED RADIATOR SHROUDS AND MOUNTED RADIATOR ONTO MACHINE AND BOLTED IT DOWN. INSTALLED LOWER RADIAOTR HOSES, ONE HOSE WAS RUBBING THROUGH INSULATION, NEW HOSE IS ON ORDER. INSTALLED FAN GUARD. WHILE BELTING DOWN RADIATOR, BUMPED INTO AN A/C COMPRESSOR LINE THAT WAS LOOSE. REFRIDGERANT LEAKED OUT AND A/C WILL NEED TO BE RECHARGED LATER. ROUTED WIRING, FIREWIRE, HEATER HOSE AND HOOKED UP BATTERY CABLES TO MASTER SWITCH.

15-Dec-2010 WOC77263 - R & I STEERING PUMP 17,534R & I STEERING PUMP

COMPLETED BY AARON, SHAWNREMOVED OLD STEERING PUMPINSTALLED NEW STEERING PUMP ONTO NEW PUMP DRIVE, HOOKED UP HOSES WITH NEW O-RINGS.

15-Dec-2010 WOC77264 - FRAME INSPECTION 17,534FRAME INSPECTION

DEC 20, 10 - FRAME INSPECTION - BILLINSPECT FRAME. NO CRACKS EVIDENT, FOUND 2 PREVIOUS REPAIRS. LEFT FRONT STRUT UPPER BEARING AREA AND LEFT BODY CYLINDER, UPPER PIN BORE.

15-Dec-2010 WOC77266 - R & I PUMP DRIVE AND U-JOINTS 17,534R & I PUMP DRIVE AND U-JOINTS

COMPLETED BY SHAWN, AARON, BILLREMOVED PUMPS OFF OF OLD PUMP DRIVE. INSTALLED NEW PUMP DRIVE ON MACHINE. INSTALLED 3 PUMPS ONTO PUMP DRIVE. INSTALLED NEW SPIDERS ON AUX DRIVE SHAFT AND INSTALLED.

30-Nov-2010 WOC75358 - DEFECT LIST 17,536minnor repairs

COMPLETED LIST PROVIDED

30-Nov-2010 WOC75301 - R/R BATTERYS 17,536replace all the batterys in the machine

NOV 30, 10 - REPAIR AXLES AND REPLACE BATTERIES ETC. - NOT SIGNEDMACHINE IS ON STANDS FOR TIRE REMOVAL. FRONT BRAKE AXLE LINES ARE HOOPED, RIGHT REA AXLE LEAKS OUT BADLYBATTERIES HAVE BEEN REPLACED.

30-Nov-2010 WOC75275 - R/R RIGHT REAR WHEEL SEAL 17,536

Page 18 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

replace right rear wheel seal group check bearings

COMPLETED FROM KEVIN'S WORK ORDER LISTNO OTHER INFO

DEC 10, 10 - IRON SMITHGOUGE OUT BUSHING ON REAR FINAL DRIVE,

30-Nov-2010 WOC75269 - R/R FRONT RIGHT WHEEL SEAL 17,536Replace right front wheel seals bearings and seals were just done in field by Jim

NOV 28, 10 - REPAIR LEAK WHEEL SEALS AND OVERFILLING AXLES - RENEGET PREPARED FOR WORK. CLEAR SNOW/ MOVE MACHINES / GET MACHINE UP ON STANDS.

DEC 04, 10 - REPAIR AXLE LEAKS -RENEDO THE FRONT AXLE SEALS INNER AND OUTER HAVE BEEN REPLACED. LEFT AND RIGHT FRONT BEARINGS REPLACED. OIL HAS BEEN ADDED TO FRONT BEARING CAVITIES. REPLACED WHEEL BEARINGS RIGHT SIDE.

30-Nov-2010 WOC75236 - CONVERT TO BODY HEAT 17,536Remove current muffler set up and convert to tray heat

DEC 22, 10 - LUCASWROTE JHA. REMOVED MUFFLER. INSTALLED ENGINE COVERS. REPAIRED THE THREADS IN THE MOUNTING PAD ON THE BUMPER TO INSTALL THE FIRE EXTINQUISHER BRACKET. CUT A 3/8" BOLT TO PROPER LENGTH AND INSTALLED FIRE EXT. I HAD TO LOOSEN THE GRILL AND SPLIT IT SIDEWAYS TO GET THE BRACKET BOLT HOLES TO LINE UP.

REMOVED MUFFLER FOR BOX HEAT.

28-Nov-2010 WOC75096 - B/S TEST 17,548HAND IN SHEET

DEC 23, 10 - B & S TEST - RICARTEBOLTED DECK PLATE ON ENGINE COVER AND REMOVED FIRE EXTINQUISHER AND BRACKET DUE TO FRONT GRILL REMOVAL ACCESS FOR HOUSING NEUTRALIZER SWITCH INDICATOR LIGHT AND ENGINE KILL SWITCH AND HARNESS. STARTED TO TROUBLE SHOOT THE PROBLEMS AND REMOVED SIWTCH. BRING TO THE BENCH, TESTED FOR CONTINUITY, IT WAS WORKING WELL. BUT IT DOESN'T KILL THE ENGINE SO I WENT TO GET THE KIT AND REPLACED CONNECTOR CLOSER TO THE SWITCH BUT DOESN'T SOLVE THE PROBLEM I FOLLOWED THE HARNESS AND FOUND OUT THAT HARNESS WAS MISMATCHED. REPLACED CONNECTOR AND PUT FRONT GRILL BACK TOGETHER. FIND AND INSTALLED RAD DRAIN PLUG AND BOLTED BOTTOM PLATE RAD GUARD. ALSO BRANE AND STEERING TEST AND MOVED UNIT OUTSIDE FOR BRAKE ABILITY TEST AND CHECK FOR OIL LEAK. BROUGHT INSIDE THE SHOP AGAIN. FINNING FUN FOR PARTS.

27-Nov-2010 WOC75273 - R/R LEFT FRONT WHEEL SEALS 17,536remove and change left front wheel seal check bearings

NOV 27, 10 - CARLDIFF WAS WAY OVERFULL. R/F WHEEL WAS OVERFULL AND UNDER PRESSURE. L/F WHEEL WAS A LITTLE OVERFULL. NO PRESSURE IN REAR PLANETARIES.

DEC 08, 10 - KARLREMOVED HUB AND PLANETARY FROM RIGHT REAR FORNT BRAKE SEALS AND BEARINGS CHANGED. PULLED HUBS.

DEC 12, 10 - REECEINSTALL FINAL DRIVESET BEARING PRE-LOADINSTALL AXLE SHAFT AND SUN GEAR

DEC 13, 10 - REECECHECKED BRAKE COOLING PRESSURE @ 120 PSI. SHOULD BE AT 85 PSI.

DEC 14, 10 - REECEDIAGNOSE BRAKE COOLING SYSTEM PRESSURE ISSUES.

26-Nov-2010 WOC74810 - IN SHEET 17,534do in sheet oil samples tire report

NOV 26, 10 - INSHEET - CARLBOOST TO START. MOVED TRUCK INTO THE WASH BAY. (BRAKES ARE NOT WORKING RIGHT BECAUSE THEY ARE LOADING UP WITH OIL). DID TIRE REPORT. SOME OF THE RENTAL RETURN INSPECTION.

18-Nov-2010 WOC74094 - HOIST PUMP 17,532

Page 19 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

REPLACE HOIST PUMP

NOV 18, 10 - OIL LEAKING - JIM MREMOVED PUMP TO INSTALL NEW LIP SEALS. PUMP WORN AND PLATES ERODED. SOME FILLING INPUMP. ORDERED A REMAN PUMP, INSTALLED , OK.

4-Nov-2010 WOC75810 - 1500 HR PM SERVICE 17,4951500 HR PM SERVICECOMPLETED BY KMC

4-Nov-2010 WOC72803 - RIGHT FRONT WHEEL GROUP 17,532RIGHT SIDE WHEEL GROUP

NOV 04, 10 - RIGHT FRONT WHEEL GROUP LEAKING OIL - GRANTORDER PARTS TO REPAIR.

NOV 07, 10 - RIGHT FRONT WHEEL GROUP LEAKING OIL. - JIMTRAVELLED TO MACHINE. REMOVED COVER. BEARINGS COMPLETELY FAILED. REMOVED HUB, BEARINGS AND BRAKES. ORDERED PARTS. WELDED OUT DUPS IN HUB. CLEANED THE HUB OFF METAL AND DEBRIS. WE CLEANED ALL THE BRAKE PLATES AND DISCS. DISASSEMBLED PISTON AND CLEANED. CLEANED UP THE SPINDLE. TRAVELLED TO FINNING, PICKED UP PARTS. ONE BEARING AND CUP BACK ORDERED. RETURNED TO THE UNIT. RESEALED BRAKE PISTON. INSTALLED DISCS AND PLATES. INSTALLED PISTON. PRESSURE CHECKED OK. COVER UP ALL PIECES. CLEANED UP WORK AREA, RETURNED TO SHOP.

NOV 08, 10 - RIGHT FRONT WHEEL BEARINGS - JIMPICKED UP PARTS. TRAVELLED TO THE SITE. FILLED OUT JHA. WAITED FOR THE FOREMAN TO SIN OFF ON JHA. SET UP JOB. HEATED WHEEL HUB. INSTALLED BEARING CUPS. INSTALLED NEW DUO-CONE SEALS, NEW BEARINGS AND HUB. SET BEARING PRELOAD. INSTALLED COVERS. CALLED FOR OIL. INSTALLED FRONT TIRE AND REMOVED STAND AND JACK. STARTED UNIT, MAN Y OTHER OIL LEAKS.

28-Oct-2010 WOC72033 - OPERATOR SEAT BROKEN 17,404OPERATOR SEAT BROKENMachine will not shift into reverse.

OCT 29, 10 - SEAT BROKEN. MIRROR LOOSE, WON'T GO INTO REVERSAL SOMETIMES - GRANTTRAVEL TO SYNCRUDE FROM KMC SUNCOR. HAND IN PASS, SIGN IN, TRAVEL TO 608 SHOVEL PIT. FILL OUT KMC FLRA AND EMECO FLRA. WAIT FOR KMC FOREMAN TO SIGN OFF ON FLRA BEFORE WORK CAN START, 30 MIN, CALL TRUCK IN. WAIT FOR TRUCK, 20 MIN. LOCKS, AND WHEEL CHOCKS. REMOVE SEAT BASE AND REPLACE WITH NEW BROKEN SIDE OUT OF OLD BASE. ADJUSTED MIRROR AND TIGHTEN LOOSE BOLTS. CHECK FOR NO REVERSE, CONNECT LAPTOP AND TEST FOR LOGGED CODES, FOUND 702-02 ERRATIC TRANSMISSION GEAR SHIFT SENSOR AND 773-03 HOIST LEVER SENSOR VOLTAGE ABOVE NORMAL ABOUT 40 HITS LAST 2 HRS AGO. CLEARED OUT CODES AND WILL CHECK AT LATER DATE. UNABLE TO GET PROBLEM TO REOCCUR, SHIFTED INTO REVERSE ABOUT 30 TIMES. REMOVE TOOLS, LOCKS AND CHOCKS. CHECK ELECTRICAL SCHAMATIC BACK AT SHOP TO SEE IF ANY COMMON WIRING BETWEEN SENSOR, FOUND COMMON GROUND. CHECKED AVAILABILITY OF BOTH SENSORS AND HARNESSES.

15-Oct-2010 WOC70834 - CHARGE STRUTS 17,532

Page 20 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

CHARGE STRUTS

MODIFY GREASE TANK (LEAKIN ON DECK)EMG STEERING PUMP LEAKINGREPLACE T/Q OUTPUT SEAL (LEAKING)PERAIR AIR LEAK P BRAKE SIDE

OCT 14, 10 - LOW STRUTTS - GRANTFIND LOCATION OF MACHINE. TRAVEL TO SYNCRUDE KMC, SIGN IN, TRAVEL TO MACHINE ON 850LEFT OF CUMP. CHECK OVER TRUCK, FOUND LEFT FRONT STRUT VERY LOW ABOUT 2" HIGH, SET UPNITROGEN CHARGE KIT AND CHARGED STRUT TO SPEC. REPAIRED ONE BROKEN GREASE LINE.NOTICED SEVERAL OTHER DEFECTS. CALLED UNIT UP AT 3 . TRAVELED BACK TO KMC. SWAPPEDOUT NITROGEN BOTTLE AS GETTING LOW.

OCT 26, 10 - CHECK AND REPAIR FRONT OF TRUCK BANGING - FINNINGREPAIR SUSPENSION CYLINDER FRONT, REPAIR FRONT SUSPENSION CYLINDER FOR BANGING.TRUCK WOULDN'T START, BOOSTED AND WARMED UP. LEFT FRONT SUSPENSION OVER CHARGEDAND STUCK. LOWERED PSI AND MOVED TRUCK AROUND TO UN STICK CYLINDER. ADJUSTED BOTHFRONT FRONT STUTS TO SIS SPEC. CHANGED OUT FILL VALVE.

OCT 26, 11 - TROUBLESHOOT NOT WORKING CAB HEATER - FINNINGREPAIR COOLANT HOSE/LINES, REPAIR FOR NO CAB HEATNO HEATER COMPLAINT FOUND, HEATER WORKING, NO HOT AIR. CHECKED TAPS AND FOUND ONETAP CLOSED AND HEATER LINE TO CAB PINCHED, REPAIRED.

OCT 26, 11 - ENGINE OVER SPEED LIGHT ON - FINNINGTROUBLESHOOT ENGINE OVER SPEED LIGHTOVER SPEED RIGHT FLASHING ON DASH. TRACED WIRING FROM ECM TO SPEED SENSOR; FOUNDBAD WIRE AT SENSOR. CHANGED OUT SENSOR AND ADJUSTED. CODE WENT AWAY.

NOV 08, 10 - OIL LEAKS - JIM MSTARTED MACHINE AND CHECKED IT OVER. OIL LEAKS . MADE A PARTS LIST. MACHINE IS VERYDIRTY. REMOVED COOLER LINES AND BYPASS, RESEALED. REINSTALLED, TESTED OK.

NOV 09, 10 - OI LEAKS - JIM MMOVED LUBE TRUCK TO MACHINE, FILLED WITH OIL. STARTED MACHINE. WARMED , RAISED BODY.BODY PIN RETAINERS BENT. UNABLE TO PIN BODY. LOWERED BODY, INFORMED KMC FOREMAN DNTHEY WILL STRAIGHTEN.

NOV 12, 10 - KEVIN LDRIVE TO KMC SHOP AND SIGN IN. DRIVE TO MACHINE. CHECKED FOR LEAKS, FOUND I NEEDEDTO RAIS EBOX TO ACCESS LEAKING COMPONENTS. R/S BOS PIN UP EAR WAS VERY BADLY BENT,HAD TO STRAIGHTEN IT WITH KMC WELDER. UNI6T WOULD NOT START, FOUND BATTER4IES DEADAND LOOSE CONNECTIONS AT BATTERIES AND STARTING SOLENOID. CLEANED AND TIGHTENEDCONNECTIONS AND CHARGE BATTERIES. STARTED UNIT, LET IT WARM UP FOR A FEW MINUTERS.RAISED AND PINNED UP BOX. FOUND LOOSE HOSES AND DAMAGED O-RINGS. CLEANED AREA ANDORDERED PARTS.

NOV 13, 10 - HYD OIL AND ENG OIL LEAKS - KEVIN LDRIVE TO KMC AND SIGN IN. REPLACED FAULTY O-RINGS AND MISSING BOLTS AT HOIST PUMPLINES. REMOVED ENGINE ACCESSORY DRIVE SHAFT AND GUARDS AND CLEANED AREA.ATTEMPTED TO REMOVE YOLK TO ACCESS LEAKING SEAL. YOLK IS BADLY SEIZED, DROVE TO SHOP,GOT PULLER, YOLK WOULD STILL NOT COME OFF, NEED TO HEAT YOLK TO REMOVE IT.

NOV 16, 10 - OI LEAKS - STEVEREMOVED OUTPUT SEAL, INSTALLED NEW SEAL, INSTALLED YOKE, INSTALLED DRIVE SHAFT. NEEDSTRANNY OI. NEEDS TO BE RUN TO FIND THE REST OF LEAKS.

NOV 17, 10 - CALLED FOR OIL, TOPPED UP OIL LEVELS - JIM M

NOV 18, 10 - OIL LEAKS - JIM MCHECK PART BRAKE AIR LEAK. NO LEAK FOUND. REMOVED GTUARD, U-JOINT AND SEAL. YOKEHAD WORN OUT. TRIED TO INSTALL SEAL, WRONG SEAL FOR TRANS. RESEARCHED PARTS ANDFOUND A SERVICE MAGAZINE REFERING TO OLD PART #. ORDERED PARTS. PPICKED UP PARTS ATFINNING, INSTALLED, TRIED TO START UNIT, BATTERIES DEAD. END OF SHIFT.HOIST PUMP WAS REPLACED. TORQUE LOCK UP VALVE. CHANGED LINE FITTING, REPLACED ANDRESEALED.

NOV 19, 10 - OIL LEAKS - JIM MFILLED TANKS WITH OIL. MACHINE HAD THE HEATER ON THE ENGINE, HYDRAULIC TANK ANDPUMPS FOR 18 HRS. STARTED MACHINE AND IT WAS WARMING UP. NOTICED THAT THEHYDRAULIC OI LEVEL WAS GOING DONW. CHECKED THE LEFT FRONT WHEEL AND IT WAS OVERFULL WITH OIL AND THE OIL WAS PUMPING RIGHT THROUGH. CHECKED RIGHT FRONT WHEEL ANDIT WAS FULL OF HYDRAULIC OIL. THE DIFF IS ALSO OVERFULL. MACHINE IS COMING TO THE

Page 21 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

SHOP. INSIDE DU-CONE SEALS ARE LEAKING.

13-Oct-2010 WOC72572 - 1250 HR PM SERVICE (KMC) 17,2171250 HR PM SERVICE COMPLETED BY KMC

12-Oct-2010 WOC70524 - NO REVERSE 17,085New operator - box was up - gearshift in wrong position when Mechanic arrived.

OCT 11, 10 - NO REVERSE - GRANTPACK UP OFF 4R-33. TRAVEL 8KM TO WI DUMP. FOUND UNIT UP. PROBLEM WAS OPERATOR WAS NEW, GEARSHIFT IN WRONG POSITION. TRAVEL BACK AND RESET UP AT 4R-33.

30-Sep-2010 WOC69495 - REPLACE FUEL PEDAL 17,018Roller and pivot pin (parts supplied by KMC)

SEPT 30, 10 - DARRENDROVE TO KMC SHOP AND PICKED UP PARTS. GOT DIRECTIONS TO TRUCK AND DROVE TO IT. SET UP, REPLACED THROTTLE PEDAL ROLLER AND PIVOT PIN. CHECKED OPERATION AND CLEANED UP. SIGNED OUT @ KMC AND DROVE BACK TO THE SHOP.

28-Sep-2010 WOC69354 - BACKCHARGE 16,990No reverse gear - operator did not press yellow button so reverse would engage.

SEPT 28, 10 - NO REVERSE - KEVIN L DRIVE TO MACHINE, FILLED OUT FLRA. LOCKED AND CHOCKED UNIT OUT OF SERVICE. CHECKED COMPLAINT. FOUND CUSTOMER DID NOT PRESS YELLOW PARK BRAKE RELEASE BUTTON SO MACHINE WOULD NTO GO INTO GEAR. CALLED CUSTOMER JOHN, NOTIFIED WHAT I HAD FOUND AND THAT MACHINE WAS UP.

24-Aug-2010 WOC66269 - 750 HR SERVICE 16,822KMC DID A 750 HR SERVICE AUG 24 AT 16822 HRS

20-Aug-2010 WOC65008 - REAR STRUTS 16,723CHARGE REAR STRUTS.

AUGUST 19,10: DRIVE TO UNIT. FILLED OUT FLRA. LOCKED OUT FLRA. LOCKED AND CHOCKED UNIT OUT OF SERVICE. CHARGED REAR STRUTSTO 4 INCHES FROM TO NUT TO BOTTOM NUT. NOTIFIED CUSTOMER UNIT IS READY FOR USE.

28-Jul-2010 WOC62462 - 500 HR PM 16,382KMC DID A 500 HR PM AT 16382 HR

21-Jul-2010 WOC61602 - INSTALL NEUTRAL RUN COVER 16,910Modify to accept lock

23 SEPT REPAIR SIGNAL LIGHTS

SEPT 23, 10 - NEUTRAL RUN COVER - GRANTTRAVEL TO SITE, TO YARD AND ONTO MACHINE. INSTALL NEUTRAL RUN COVER. PACK UP WELDING CABLES. PAINT TAB. REPAIR VENTS BROKEN PARTS SUPPLIED KMC. 5 MIN.

SEPT 23, 10 - SIGNAL LIGHT NOT WORKING - GRANTTRAVEL TO MACHINE. LOCK OUT UNIT WHEEL CHOCKS, FLRA. RUNNING REPAIRS ADD. TEST SIGNAL LIGHT. FOUND ONLY 6 LED WORKING. SET UP LADDER, CHECK WIRING, FOUND 2 DETER PINS (REPLACED PINS). TEST VOLTAGE FOUND GOOD. TEST STILL NOT WORKING. GET LIGHT FROM KMC. REMOVE OLD LED. CUT STRIPPED BOLT HEAD OFF. INSTALL NEW LED, TEST OK. PACK UP. KMC SUPPLIED PARTS, 334-5409 LED LIGHT.

19-Jul-2010 WOC61430 - L/H TURBO OIL LEAK 16,195Possible return line gasket.

JULY 18,10: TURBO OIL LEAK L/H TURBO:TVL TO UNIT. QUICK CHECK ON MACHINE. HEAVY OIL LEAK AT TURBO LOOKS LIKE OIL FEED LINE. BUT TO HOT TO GET VERY CLOSE AND INSPECT.. LOCK OUT UNIT. REMOVED CHOCKS AND LOCKS.NOTICED KMC D6R 2-80 HAD LOOSE SEGMENTS WHEN IT PARKED ALONGSIDE TAG UNIT DOWN AND RANG KMC.

JULY 19,10: TURBO OIL LEAK:WAIT FOR RIDE TO MACHINE AS EMECO TRUCK ONLY TWO WHEEL DRIVE. LOCKS AND WHEEL CHOCKS. CLEAN AREA. REMOVE TURBO COOLANT LINES AND CAP. REMOVE OIL FEED LINE AND CHANGE GASKET MOUNTING BOLTS WERE LOOSE. CLEAN UP GASKET AND RESEAL. TOP UP COOLANT. WAIT FOR ONE HOUR FOR STEAM CLEANER TO CLEAN OFF OIL. TEST RUN AND CHECK.

16-Jul-2010 WOC61318 - BLOWN HIOSTCYLINDER HOSE 16,167

Page 22 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016

Meter Reading (Hrs)Start Date Job Number / Description

Maintenance History Continued for Equipment ID: RDC049

TOP HOSE RHS HOISTHOSE PN: 218-3778

NOVEMBER 17,10: BLOWEN R/H HOIST LINE:LOAD TOOLS FROM SOUTHERN MAN TO EMECO FIELD TRUCK, PICK UP HOSE AT FINNING. TVL TOKMC LAYDOWN SYNCRUDE. ESCORT TO MACHINE. CHOCK AND LOCKOUT TRUCK. CHANGE HOISTLINE. TEST AND TOP UP OIL OK. CLEAN UP.

8-Jul-2010 WOC60184 - CHECK BLOWER MOTOR 16,037Fan speeds 1 and 3 working.

JULY 8,10: TROUBLESHOOT FAN SPEED:REMOVE FRONT COVER , REMOVE FAN MODULE TEST RESISTOR AND SWITTH FOUND. RESISTOR BURNT OUT. ORDER PARTS. WAIT FINNING FOR PARTS TO BE PICKED. REASSEMBLE AND TEST OK.

28-Jun-2010 WOC58606 - GPS INSTALLS 16,032TITAN TO INSTALL GPS SYSTEM

23-Jun-2010 WOC58215 - INSTALL FIRE SUPPRESSION 16,037Install Ansul fire systemInstall by Odie Mechanical at Gladiator equipment.

WE DID A COMMISION ON UNIT 49. CONNECTED PANEL. PUT FUSES IN PACE. METERED PANEL. BLEW 1/4" LINES. CONDUCTED ENGINE SHUTDOWN. CHECKED I/R'S FIREWIRE, WIRING AND HOSE CONNECTION. UPON CHECKING FOUND, I LOOSE CONNECTION AND USED 1' OF 7/4" HOSE WRAP. SYSTEM OK. COMISSIONED.

23-Jun-2010 WOC58214 - INSTALL AUTO LUBE 16,032Install Autio Lube Installation carried out at Gladiator Equipment

21-Jun-2010 WOC57983 - PREP FOR RENT 16,305Assemble trucksFit Fire Suppression

JULY 5,10: PREPERATION FOR RENT:DRIVE TO KMC CROSS YARD. FILLED OUT FLRA, LOCKED ANC CHOCKED UNIT OUT OF SERVICE. CHARGED STRUTS, TOPPED UP FLUIDS. INSTALLED CHAINS ON HAND RAIL BESIDE OPERATOR DOOR. RAPAIRED AIR LEAK AT SAFETY VALVE ON AIR TANK. INSTALLED EVACUATOR VALVE ON AIR FILTER HOUSING, TOPPED UP WASHER FLUID. HOOKED UP HOIST CYLINDERS TO BASE. INSTALL MUD FLAPS, ROCKEJECTORS. INSTALLED BROCE FOR REAR TIRES VALVE STEMS, REPAIRED AIRLINES RUBBING. REPAIRED COOLANT LEAKS, REPAIR AIR COMPRESSOR OIL LEAK, REPLACED WASHER PUMP TIGHTENED A/C BELT. INSTALLED ETHER BOTTLE. REPAIRED TRANS FILTER HOUSING LEAK.

Page 23 of 23Emeco Canada Limited GST Registration # 104545959RTweb www.emecogroup.com Printed on: 12-Jan-2016