physics by younes sina
DESCRIPTION
Younes Sina's Lecture at Pellissippi State Community CollegeTRANSCRIPT
Chapter 16
Waves and Sound
Younes Sina
A wave is the motion of a disturbance in a medium.The medium for ocean waves is water.When a string, fixed at both ends, is given a vertical hit by a stick, a dent appears in it that travels along the string. When it reaches an end point, it reflects and inverts and travels toward the other end. The following figure shows the motion of a single disturbance.
Types of Waves:classification of waves :MechanicalElectromagneticMechanical waves require matter for their transmission. Sound waves, ocean waves, and waves on a guitar string are examples. Air, water, and metal string are their media (matter), respectively.
Electromagnetic waves can travel both in vacuum and matter. If light (a wave itself) could not travel in vacuum, we would not see the Sun. Light is an electromagnetic wave. Radio waves, ultraviolet waves, and infrared waves are all electromagnetic waves and travel in vacuum.
Waves are also classified as: Transverse Longitudinal
For a transverse wave the disturbance direction is perpendicular to the propagation direction. Water waves are transverse. Waves on guitar strings are also transverse.
For a longitudinal wave the disturbance direction is parallel to the propagation direction. Waves on a slinky as well as sound waves are longitudinal.
Frequency ( f ):Frequency ( f )The number of full waveforms generated per second.The SI unit for frequency is (1/s), or (s -1), called "Hertz (Hz)“.Period ( T ):Period is the number of seconds per waveform, or the number of seconds per oscillation.T = 1 / fRelation between frequency ( f ) and the angular speed ( ω ):ω = 2π fω is the number of radians per secondf is the number of turns per secondEach turn is 2π radians
Wavelength ( λ ) is the distance between two successive points on a wave that arein the same state of oscillation.
Points A and B in the above Figure are the nearest or successive points that are both the same amount passed the maximum and therefore in the same state of oscillation.
At the following Figure the distance between any node and the anti-node
next to it is λ/4.
Wave Speed ( v )The wave speed is the distance a wave travels per second.
v = f λ
Example :The speed of sound waves at STP conditions is 331 m/s.Calculate the wavelength of a sound wave with a frequency of 1324 Hz at STP.
Solution:
v = f λ → λ = v/fλ = (331m/s) / (1324/s) = 0.250 m
The Vibrating String
Nodes are points of zero oscillation and antinodes are points of maximum oscillation as shown in following Figure.
Example:In a 60.0-cm long violin string, three antinodes are observed. Find the wavelength of the waves on it.
Solution: Each loop has a length of (60.0cm/3)=20.0 cm.Each wavelength (a full sine wave) contains two of such loops; therefore,
λ = 40.0 cm
Speed of Waves in a Stretched String:
The speed of waves in a stretched string depends on the tension F in the string aswell as the mass per unit length, μ, of the string as explained below:The more a string is stretched, the faster waves travel in it.The formula that relates tension F in the string and the waves speed, v, is:
mass per unit length
Example : A 120-cm guitar string is under a tension of 400 N. The mass of the string is 0.480 grams. Calculate (a) the mass per unit length of the string and (b) the speed of waves in it(c) In a diagram show the number of (1/2) λ that appear in this string if it is
oscillating at a frequency of 2083 Hz.
Solution:(a) μ = M / Lμ = (0.480x10-3 kg) /1.20 m = 4.00x10-4 kg/m(b) v = (F/μ)1/2
v = (400N / 4.00x10-4 kg/m)1/2 = 1000 m/s(c) v = f λ → λ = v / fλ = (1000 m/s) / (2083/s) = 0.480 m(1/2)λ = 0.480 m/ 2 = 0.240 mThe number of (λ/2)'s that fit in the string length of 120 cm is 1.20 m/ 0.240 m= 5.00
Resonance
In physics, resonance is the tendency of a system to oscillate with greater amplitude at some frequencies than at others. Frequencies at which the response amplitude is a relative maximum are known as the resonance frequencies.
"The phenomenon of making a body vibrate with its natural frequency underthe influence of another vibrating body having the same frequency is called RESONANCE“Two oscillatory (periodic) motions have the same period (or frequency) andare also in phase.
The Resonance of Sound Waves in Pipes:
From music point of view, a pipe open at both ends is called an "open pipe".
A pipe, closed at one end only, is called a "closed pipe.“
Sound waves are longitudinal (their disturbance direction is parallel to their propagation direction). In pipes, sound waves oscillate parallel to the pipe's length.
1) Closed Pipes:At the closed end of a closed pipe, only a node can form, because the air molecules (inside the pipe) that transmit sound waves have to bounce off the closed end after collision.They have to come to stop before bouncing off. Coming to stop means zero state of oscillation at that closed end that results in node formation.
At the open end of a closed pipe; however, both nodes and antinodes are possible to form depending on the wavelength of the sound waves as well as the pipe's length.
For a closed pipe, resonance occurs when the pipe's length is an odd multiple of ( λ/4 )
L1 = 1 λ/4
L3 = 3 λ/4
L5 = 5 λ/4
L7 = 7 λ/4
2) Open Pipes:An open pipe is open at both ends; therefore, both ends must form antinodes forthe pipe to be "in resonance."The pipe length must be an even multiple of ( λ/4 ) for resonance.
For an open pipe, resonance occurs when pipe's length is an even
multiple of (λ/4 ).
L1 = 2 λ/4
L3 = 4 λ/4
L5 = 6 λ/4
L7 = 8 λ/4
The Speed of Sound in a Gas:The speed of sound in a medium is a function of the physical properties of thatmedium. The speed of sound in a gas is a function of:gas temperaturePressuredensity
Example :A tuning fork oscillating at a rate of 686 Hz is brought close to the open end of a closed tube in a room at a certain temperature. The tube's length is changed from 0.0 to 40.0 cm and two resonances (load sounds) are heard:the first one, at a tube length of 12.5 cm, and next, at a tube length of 37.5 cm.Calculate the speed of sound at that temperature.
v(T)=[331+0.6T] m/s T (in oC)
Solution:The smallest length of a closed pipe for resonance is λ/4. The first resonance length of 12.5 cm means λ/4 = 12.5 cm.The second resonance occurring at a length of 37.5 cm means 3λ/4 = 37.5 cm
λ/4 = 12.5 cmλ = 4(12.5cm) = 50.0 cm3λ/4 = 37.5cmλ = (4/3)(37.5 cm)λ = 50.0 cm
Getting the same results should not be surprising because they are both measurements of the same thing.Knowing λ and the frequency of the waves: f = 686 Hz, the sound speed at that temperature isv = f λvsound = [686 (1/s)] (0.500m) = 343m/s
Speed of sound at STP conditions (0oC and 1atm pressure) is 331 m/s
The Doppler Effect:When an ambulance is approaching us, a higher pitch sound is heard than when it is going away from us. The reason is that when the sound source is moving toward us, more number of wavelengths per second arrive at our ears than when it is at rest. When the sound source (ambulance) is going away from us, less number of wavelengths arrive at our ears than when the source (ambulance) is at rest.
Cases (1) and (2) are when the observer is at rest and the source is approaching or receding.
❷❶
Five cases for the frequency heard by the observer:
Cases (3) and (4) are when the source is at rest and the observer is approaching or going away.
❹
❸
❺
Case (5) is when both observer and source are moving, either approaching or receding.
fo = the frequency heard by the observerfs is the frequency of the sound sourcevs is the speed of the sourcevo is the speed of the observerv is the speed of sound in the medium.
1) Denom. < Numerator →fo > fs
2) Denom. > Numerator →fo < fs
3) Denom. < Numerator →fo > fs
4) Denom. > Numerator →fo < fs
5) Choose (+) and (-) signs that make sense
Case 5: If both the observer and the source are approaching, the highest possible frequency is heard. To make the fraction the greatest, chose the (+) in the numerator and the (-) in the denominator.
If both the observer and the source are receding, the lowest possible frequency is heard. To make the fraction the least, chose the (-) in the numerator and the (+) in the denominator.
If the source is chasing the observer, choose (-) in the numerator and (-) in the denominator.
If the observer is chasing the source, choose (+) in the numerator and (+) in the denominator.
)(s
oso
vv
vvff
)(s
oso
vv
vvff
)(s
oso
vv
vvff
)(s
oso
vv
vvff
S O
S
S
S
O
O
O
Example :If an ambulance with its siren on at a frequency of 1350 Hz is approaching you at a speed of 33.1 m/s at STP conditions, calculate(a) the frequency you hear.(b) If you are driving at a speed of 16.55 m/s toward the coming ambulance,
what frequency do you hear?(c) If you are driving at a speed of 16.55 m/s away from the moving
ambulance, what frequency do you hear?(d) What frequency do you hear when the ambulance passes your car and
continues in front of you?(e) What frequency do you hear if both of you and the ambulance stop?
a
d
c
b
e
Solution:(a) Case 1: fo = fs [ (Vo) / (V - Vs) ]fo = 1350Hz [(331 + 0) /( 331 - 33.1 )] = 1500 Hz
(b) Case 5, source & observer moving toward each other: fo= fs[(V + Vo)/(V-Vs)]= 1575 Hz
(c) Case 5, source chasing the observer: fo = fs [(V-Vo)/(V-Vs)] = 1425 Hz
(d) Case 5, observer chasing the source: fo = fs [(V + Vo)/(V + Vs)] = 1290Hz
(e) Case 5, Vo = 0 and Vs = 0. ; fo = fs [(V+0)/(V+0)] = 1350Hz
)(s
so
vv
vff
)(s
oso
vv
vvff
)(s
oso
vv
vvff
)(s
oso
vv
vvff