photoswitch® photoelectric sensors 42kl minisight …...description the 42kl minisight sensors...
TRANSCRIPT
Description
The 42KL MiniSight sensors offer a wide range of sensing modes in a compact housing that is designed to meet the requirements of the material handling and packaging industries. These sensors feature flexible mounting options to facilitate product installation by providing 18 mm threaded nose and 24.1 mm side mounting.
The high visibility indicators for power, output, and margin help customers troubleshoot and verify proper sensor operation.
Features
Easy access to sensor adjustments through a captive cover DC and two- wire universal AC/ DC models 0.3 ms high speed DC versions Selectable switch for light or dark operation Dual (NPN and PNP) output models No tools required to attach fiber optic cables IP67 with 1200 psi
Available Models
Retroreflective
Polarized Retroreflective
Standard Diffuse
Wide Angle Diffuse
Fixed Focus Diffuse
Large Aperture Fiber Optic
Small Aperture Fiber Optic
PHOTOSWITCH® Photoelectric Sensors42KL MiniSight™
INTRODUCTION
Visit our website: www.ab.com/ catalogs.Preferred availability cat. nos. are printed in bold.
Specifications
Certifications UL Listed, CSA Certified, and CE Marked for all applicable directives
Vibration 10… 55 Hz, 1 mm amplitude, meets or exceeds IEC 60947-5-2
Shock 30 g with 1 ms pulse duration, meets or exceeds IEC 60947-5-2
Environmental
Enclosure Type Rating NEMA 4X, 6P, IP67; 1200 psi (8270kPa) washdown
Operating Temperature [C (F)] -20… +70° (-4… +158°)
Relative Humidity 5… 95%
User Interface
Indicator LEDs Green, orange, and amber
Electrical
Current Consumption 30 mA max.
Protection Type Overload short circuit, reverse polarity, false pulse
Outputs
Output Function Selectable light or dark operate
Load Current 100 mA
Mechanical
Housing Material Noryl® 190X
Lens Material Acrylic
Supplied Accessory 18 mm mounting lock nut
For Output Type and Connection Type, see Product Selection.
Optical and Reponse Time Characteristics
Sensing Mode
Retroreflective Polarized Retroreflective
Diffuse Wide Angle Diffuse
Fixed Focus Transmitted Beam
Large Aperture Fiber Optic
Small Aperture Fiber Optic
Standard
Field of View
1.5° 1.5° 5° 18° Refer to Product Selection
7° Depends on glass fiber optic cable selected
Depends on glass fiber optic cable selected
Spot Size 134 mm (5.24 in.) @ 5 m65 mm (2.56 in.) @ 2 m
53 mm (2.1 in.) @ 2 m27 mm (1.06 in.) @ 1 m
42 mm (1.65 in.) @ 380 mm20 mm (0.79 in.) @ 190 mm
64 mm (2.52 in.) @ 180 mm27.4 mm (1.08 in.) @ 90 mm
— 1.12 m (3.7 ft)
— —
Light Source
Visible red 660 nm Infrared 880 nm Visible red 660 nmVisible green 525 nm
Infrared 880 nm Visible red 660 nm
Response Time
1 ms (DC), 0.3 ms (high speed DC), 8.3 ms (AC/ DC) — 1 ms ms (DC), 0.3 ms (high speed DC), 8.3 ms (AC/ DC)
PHOTOSWITCH® Photoelectric Sensors42KL MiniSight™
SPECIFICATIONS
Visit our website: www.ab.com/ catalogs.Preferred availability cat. nos. are printed in bold.
Product Selection
Retroreflective, Polarized Retroreflective, Diffuse, and Wide Angle Diffuse Sensing Modes
Sensing Mode Operating Voltage Light Source Sensing Distance Output Type Cat. No.⋆
Retroreflective 10.8… 30V DC Visible red 0.025… 5 m (0.08 … 16.4 ft) NPN and PNP
42KL- U2LB- F4
0.025… 2.5 m (0..08 … 8.2 ft)
42KL- U2LBQ- F4
21.6… 250V AC/ DC
0.025… 5 m (0.08 … 16.4 ft) MOSFET 42KL- U2TC- G3
Polarized Retroreflective
10.8… 30V DC Visible red 0.025… 2 m (0.08 … 6.6 ft) NPN and PNP
42KL- P2LB- F4
0.025… 1 m (0.08 … 3.3 ft) 42KL- P2LBQ- F4
21.6… 250V AC/ DC
0.025… 2 m (0.08 … 6.6 ft) 42KL- P2TC- G3
Diffuse 10.8… 30V DC Infrared 1… 380 mm (0… 15 in.) NPN and PNP
42KL- D1LB- F4
1… 190 mm (0… 7.5 in.) 42KL- D1LBQ- F4
21.6… 250V AC/ DC
1… 380 mm (0… 15 in.) MOSFET 42KL- D1TC- G3
Wide Angle Diffuse 10.8… 30V DC Infrared 880 nm
1… 180 mm (0… 7 in.) NPN and PNP
42KL- W1LB- F4
1… 90 mm (0… 3.5 in.) 42KL- W1LBQ- F4
21.6… 250V AC/ DC
1… 180 mm (0… 7 in.) MOSFET 42KL- W1TC- G3
Recommended standard 4- pin DC micro (M12) quick- disconnect cordset 889D- F4AC-2
Recommended standard 4- pin DC pico (M8) quick- disconnect cordset 889P- F4AB-2
⋆ Connection Options: The - F4 suffix describes a 4- pin DC micro (M12) quick- disconnect connector on a pigtail for DC models and the - G4 denotes a 4- pin AC micro (M12) quick- disconnect connector on a pigtail for AC models. For additional connection options, replace the - F4 suffix with: - A2 for a 2 m cable without quick- disconnect connection (for example, 42KL- P2LB- A2). - Y4 for a 4- pin pico (M8) quick- disconnect connection on a 150 mm (6 in.) pigtail (for example, 42KL- P2LB- Y4). This option is only available for DC sensors.
PHOTOSWITCH® Photoelectric Sensors42KL MiniSight™
PRODUCT SELECTION
Visit our website: www.ab.com/ catalogs.Preferred availability cat. nos. are printed in bold.
NA (emitter) NA 42KL- E1EZB- F4
30 m (98 ft) NPN and PNP
42KL- RLB- F4
NA (emitter) NA 42KL- E1EZB- Y4
21.6… 250V AC/ DC
30 m (98 ft) MOSFET 42KL- RTC- G3
Large Aperture Fiber Optic
10.8… 30V DC Infrared 880 nm Depends on Fiber Optic Cable
NPN and PNP
42KL- G1LB- F4
42KL- G1LBQ- F4
21.6… 250V AC/ DC
MOSFET 42KL- G1TC- G3
Small Aperture Fiber Optic
10.8… 30V DC Visible red 660 nm
Depends on Fiber Optic Cable
NPN and PNP
42KL- L2LB- F4
42KL- L2LBQ- F4
MOSFET 42KL- L2TC- G3
Recommended standard 4- pin DC micro (M12) quick- disconnect cordset. 889D- F4AC-2
Recommended standard 4- pin DC pico (M8) quick- disconnect cordset. 889P- F4AB-2
⋆ Connection Options: The - F4 suffix describes a 4- pin DC micro (M12) quick- disconnect connector on a pigtail for DC models and the - G4 denotes a 4- pin AC micro (M12) quick- disconnect connector on pigtail for AC models. For additional connection options, replace the - F4 suffix with: - A2 for a 2 m cable without quick- disconnect connection (for example, 42KL- P2LB- A2 ). - Y4 for a 4- pin pico (M8) quick- disconnect connection on a 150 mm (6 in.) pigtail (for example, 42KL- P2LB- Y4). This option is only available for DC sensors.
PHOTOSWITCH® Photoelectric Sensors42KL MiniSight™
PRODUCT SELECTION
Visit our website: www.ab.com/ catalogs.Preferred availability cat. nos. are printed in bold.
Fixed Focus Diffuse, Transmitted Beam, Large Aperture, and Small Aperture Fiber Optic Sensing Modes
Sensing Mode Operating Voltage Light Source Sensing Distance Output Type Cat. No.⋆
Fixed Focus Diffuse 10.8… 30V DC Visible red 16 mm (0.63 in.) NPN and PNP
42KL- F2LBS- F4
43 mm (1.7 in.) 42KL- F2LBL- F4
16 mm (0.63 in.) 42KL- F2LBSQ- F4
43 mm (1.7 in.) 42KL- F2LBLQ- F4
21.6… 250V AC/ DC
16 mm (0.63 in.) MOSFET 42KL- F2TCS- G3
43 mm (1.7 in.) 42KL- F2TCL- G3
10.8… 30V DC Visible green 16 mm (0.63 in.) NPN and PNP
42KL- F3LBS- F4
42KL- F3LBSQ- F4
Transmitted Beam Emitter
10.8… 30V DC Infrared NA (emitter) NA 42KL- E1EZBQ- F4
10 m (33 ft) NPN and PNP
42KL- RLBQ- F4
Cat. No. Explanation
PHOTOSWITCH® Photoelectric Sensors42KL MiniSight™
CAT. NO. EXPLANATION
Visit our website: www.ab.com/ catalogs.Preferred availability cat. nos. are printed in bold.
User Interface
DC Sensors LED Color State Status
Green OFF Power is OFF*
OFF Power is ON
Orange OFF Margin < 2.5X
ON Margin > 2.5X
Flashing Output short- circuit protection active
Amber OFF Output de- energized
ON Output energized
AC Sensors LED Color State Status
Green OFF Power is OFF*
OFF Power is ON
Orange OFF Margin < 2.5X
ON Margin > 2.5X
Flashing Output short- circuit protection active
Amber OFF Output de- energized
ON Output energized
PHOTOSWITCH® Photoelectric Sensors42KL MiniSight™
USER INTERFACE
Visit our website: www.ab.com/ catalogs.Preferred availability cat. nos. are printed in bold.
Wiring Diagrams⋆ �
⋆ For Allen- Bradley programmable controller compatible interface, refer to publication 42�2.0.� All wire colors on quick- disconnect models refer to Allen- Bradley 889D cordsets.
PHOTOSWITCH® Photoelectric Sensors42KL MiniSight™
WIRING DIAGRAMS⋆ �
Visit our website: www.ab.com/ catalogs.Preferred availability cat. nos. are printed in bold.
Approximate Dimensions
Dimensions are shown in mm (in.). Dimensions are not intended to be used for installation purposes.
Special Glass Fiber Optic cables are also available with 2.2 mm (0.09 in) diameter control end tips.Note: Cat. No. 61-6731 adaptors are required for smaller fiber optic cables with jacket diameters of 1.25 mm (0.05 in).
Refer to www.ab.com/ e- tools or Proposal Works for 2D and 3D CAD drawings.
PHOTOSWITCH® Photoelectric Sensors42KL MiniSight™
APPROXIMATE DIMENSIONS
Visit our website: www.ab.com/ catalogs.Preferred availability cat. nos. are printed in bold.
Typical Response Curves
PHOTOSWITCH® Photoelectric Sensors42KL MiniSight™
TYPICAL RESPONSE CURVES
Visit our website: www.ab.com/ catalogs.Preferred availability cat. nos. are printed in bold.
Cordsets and Accessories
Description Cat. No. Description Cat. No.
DC Micro QD Cordset, Straight, 4- pin, 2 m (6.5 ft) 889D- F4AC-2 Spare reflector, corner cube, 76 mm (3 in.) diameter with mounting hole 92-39
DC pico (M8), right angle, 2 m 889P- F4AB-2 Spare reflector, corner cube, 32 mm (1.25 in.) diameter with mounting hole 92-47
Mounting bracket, right angle 60-2664 Replacement cover and locking clip 60-2679
Mounting bracket, right angle 60-2657 Aperture mounting kit 60-2676
Mounting bracket, side 60-2656 Replacement fiber optic retaining clip 60-2680
PHOTOSWITCH® Photoelectric Sensors42KL MiniSight™
CORDSETS AND ACCESSORIES
Visit our website: www.ab.com/ catalogs.Preferred availability cat. nos. are printed in bold.