phoenix mmxi 7 foot 3 in 1 billiard tableplease read and understand all instructions before...

GLD Products Phoenix MMXI 3 in 1 Billiard Table

Item 64-0145

Item 64-0145

June 2011 UPC Code 7-19265-52219-5

PHOENIX MMXI 7 FOOT

3 IN 1 BILLIARD TABLE

Replacement Parts

Order direct at www.gldproducts.com or call our Customer Service department at

(800) 225-7593 ext. 1138 am to 4:30 pm Central Standard Time


Item 64-0145

Staple your receipt here.Important: A copy of your receipt will be needed to activate your warranty (see page page 14)


Item 64-0145

GLD Products Phoenix MMXI 3 in 1 Billiard TableItem 64-0145

3 1-800-225-7593www.gldproducts.com

Congratulations and THANK YOU for purchasing the Phoenix MMXI 7 Foot 3 in 1 Billiard Table. You have chosen a product that should provide years of enter-tainment. To assist you with customer service and warranty claims, staple your receipt to the inside cover, then keep this manual in a safe place for future reference.

GLD ProductsS84 W19093 Enterprise Drive

Muskego, WI 53150 USA1-800-225-7593 ext. 113

Fax: 1-800-841-6944Email: [email protected]

Web: www.gldproducts. com

This manual may have been updated. For the latest manual visit the GLD products website.

Place your package near the location where it will be used. Carefully unpack all components and verify you have all the correct pieces.

If you notice missing or defective parts, please call us at:1-800-225-7593 ext. 113

Please read and understand all instructions before beginning assembly.

This assembly will require 2 adults.

This product is not for use by children without adult supervision.


1-800-225-7593 4www.gldproducts.com

GLD Products Phoenix MMXI 3 in 1 Billiard TableParts Identifier Item 64-0145


Part No./Qty

Illustration/Order Number

PartNo./Qty


Part No./Qty


1

Qty. 2 Left Leg

Order No. 1-213

2

Qty. 2 Right Leg

Order No. 1-214

3

Qty. 4 Leg Support

Order No. 1-215

4

Qty. 1

Table Top AssemblyOrder No. 1-225

5

Qty. 2 Leg End Panel

Order No. 1-217

6

Qty. 16 1/4" x 2" Bolt

Order No. 2-180

7

Qty. 16

1/4" Washer 19 mmOrder No. 1-220

8

Qty. 16 1/4" Barrel Nut

Order No. 2-12

9

Qty. 12 5/16" x 2" Bolt

Order No. 1-11

10

Qty. 12 5/16" Washer 19 mm

Order No. 1-90

11

Qty. 1

Hockey Table with Table TennisOrder No. 1-218

12

Qty. 4 Leg Leveler

Order No. 1-219

13

Qty. 1

Billiard BallsOrder No. 2-21

14

Qty. 1 Triangle

Order No. 2-27

15

Qty. 2

CueOrder No. 2-23

16

Qty. 2 Chalk

Order No. 2-24

17

Qty. 1 Brush

Order No. 1-221

18

Qty. 2 Goalie

Order No. 2-18

19

Qty. 2 Hockey Felt

Order No. 2-19

20

Qty. 2 Hockey Puck

Order No. 2-20

21

Qty. 2

Table Tennis PostOrder No. 1-222

22

Qty. 2

Table Tennis RacketOrder No. 8-5

23

Qty. 2

Table Tennis BallOrder No. 8-4

24

Qty. 1

Table Tennis NetOrder No. 1-223

GLD Products Phoenix MMXI 3 in 1 Billiard TableParts Identifier Item 64-0145


25

Qty. 1

WrenchOrder No. 1-17

26

Qty. 1

Allen WrenchOrder No. 2-116



IF YOU HAVE A WARRANTY CLAIM, CALL US FIRSTPlease see page 14.

GLD ProductsAvailable 8 am to 4:30 pm Central Standard Time

S84 W19093 Enterprise DriveMuskego, WI 53150 USA1-800-225-7593 ext. 113


Web: www.gldproducts.com

For all claims, please have your receipt and item number when you call. The product item number can be found on the front cover.

If you are instructed to return the product for service, you are responsible for shipping the unit at your expense.

PRODUCT REGISTRATION

Important: The product registration form on page 15 and a copy of your receipt must be completed and returned within 10 days of purchase to validate your warranty.

Preparing for Assembly• Be sure to unpack all of the parts included in this package. Some

parts may be in obscure locations of the packaging. Check inside any tubes or sleeves. Save all packing material until the product is fully assembled and functional.

• Compare the parts in your package with the Parts Identifier description on page 5.

Tools Required• Wrench (#25)• Allen Wrench (#26) • Level (not included)• Electric screwdriver may be helpful. CAUTION: You must set at LOW

TORQUE and use extreme caution because you could overtighten the hardware, strip the screws, or damage the table.



Assembly TipsMake sure you understand the following before you begin to assemble your pool table.

1. READ THIS MANUAL all the way through before beginning assembly.

2. When installing parts that have more than one bolt, start ALL bolts in that part by hand before tightening anything.

3. Some drawings or images in this manual may not look exactly like your product.

4. You will need a second adult to assist with this assembly.

Note: Save all packing materials until the parts have been inspected and the table is assembled.

Unpack the Pieces • Lay the box top side down on a flat surface (floor). You may want this

near your area of assembly.• Unpack the boxes and part bags. Inspect and count the parts. The

Parts Identifier page can be used to record your results. • If any parts are damaged or missing contact GLD customer service.• Missing fasteners may be purchased at a hardware store using the

descriptions on the Parts Identifier page(s).

STEP 1 - ASSEMBLE THE LEGS

1. Lay the leg supports (#3) on the floor with the side that has the four holes facing up. Put a barrel nut (#8) in each hole with the threaded hole facing the short edge.

2. Hold one of the legs (#1 or #2) on edge. Hold the leg support (#3) against the leg, lining up the bolt holes. The holes for the barrel nuts (#8) should face toward the bottom of the leg.

3. Place a washer (#7) over a bolt (#6) and insert the bolt through the leg into the barrel nut in the leg supports. Finger start the bolt. Repeat for the second bolt and finger tighten both bolts.

4. Hold the second leg in position. Insert the two bolts (#6) with washers (#7) through the leg and finger tighten.

5. Repeat Steps 3 & 4 for the bottom leg support (#3).



6. The leg end panel (#5) should slide into the channels on the legs. It may be helpful to stand the leg assembly up as shown. This will help prevent the leg assembly from becoming angled and preventing the leg end panel from sliding into place. The side of the leg end panel that is visually better should be to the outside of the curve.

7. When the leg end panel (#5) is in place tighten all eight support bolts (#6) using the allen wrench (#26).

8. Repeat for the second leg assembly



STEP 2 - CONNECT LEG ASSEMBLIES

1. Place the table top upside down on a flat surface.

2. Position one leg assembly from Step 1 inside the framework of the table top.

3. Place a washer (#10) over a bolt (#9). Insert the bolt through the frame and into the threaded hole in the leg assembly. Finger tighten.

4. Repeat for the other five bolts.

5. Tighten all six bolts using the wrench (#25)

6. Repeat for the second leg assembly.

7. Screw a leg leveler (#12) halfway into the hole in each leg.

STEP 3 - TURN BASE OVER



The base assembly is ready to be turned over.USE AT LEAST TWO PEOPLE TO LIFT THE BASE ASSEMBLY AND TURN IT OVER TO REST ON THE LEGS.

DO NOT ROLL THE TABLE OVER. This will place a sideways force on the legs. The legs should be off the floor until the base assembly is rotated completely. Set the base assembly down.

If visually the leg positions need adjusting, loosen the bolts, adjust, and retighten.

STEP 4 - LEVEL THE TABLE BASE

1. Place table into position in your room (13' 4" x 17' 0" minimum). Measure ends at base frame to walls, making sure there is at least 60" between the table and the wall. You do not want to move the table after this step.

2. Use a carpenters level to find the low side.

3. Lift the table leg off the floor and unscrew the leveler in the base a small amount.

4. Repeat until the base is level. Be sure to check level at both ends side to side as well as the longer length. Readjustment may be needed in the future.

5. Your table is ready for use.

DO THIS NOT THIS



STEP 5 - USING THE ADDITIONAL TABLE TOPA second table top insert is used to provide a playing surface for Table Tennis and Hockey. When using the insert, the Pool Table surface must be clean. Any debris may create an imperfection in the pool playing surface.Place the insert on the pool playing surface and inside the bumpers. When using the Table Tennis surface, press the table tennis posts (#21) in place. Tie the table tennis net (#24) in place. The net should be stretched enough to be tight but not bend the two posts.

Side 1Table Tennis

Side 2Hockey Table



Care and Use of your Table• This product is intended for INDOOR use only.• DO NOT sit, climb, or lean on the table.• DO NOT drag the table when moving it. This will damage the legs.• Keep your table covered. The playing surface can be brushed to

keep clean.• DO NOT lift the table by placing your hands under the pockets, and

do not sit, lean or put pressure on the pockets.• The cloth playing surface can rip or tear. Keep sharp objects off the

playing surface. • Some “trick shots” may tear or dimple the cloth surface. • To clean the hard surfaces spray a cloth with a mild cleaner and

wipe.



90-DAY LIMITED WARRANTY The Manufacturer warrants to the original retail purchaser that this product is free fromdefects in material and workmanship under normal use and conditions for a period of ninety(90) days from the date of original purchase. The Manufacturer’s liability is limited to therepair or replacement, at its option, of any defective product and shall not include any liabilityfor indirect, incidental or consequential damages of any kind. Should this product become defective due to material or workmanship within the warrantyperiod, contact our Customer Service Department. This warranty is not transferable anddoes not cover normal wear and tear or damage caused by improper usage, negligence,misuse, abuse, transportation damage, acts of nature, or accident (including failure to followthe instructions in this manual). It does not cover expendable items such as batteries, lightbulbs, fuses, accessories, cosmetic parts and other items that wear out due to normalusage, including felt covered areas of the playing surface. This warranty is also void if theproduct is disassembled and reassembled, damaged, modified from its original state, orused for other than indoor personal residential use (no commercial or rental applications). This warranty gives you specific legal rights, and you may have other rights which vary fromstate to state.

IF YOU HAVE A WARRANTY CLAIM, CALL US FIRST (8 - 4:30 CST)Please have your receipt and item number (found on the front cover) when you call.

GLD ProductsS84 W19093 Enterprise Drive

Muskego, WI 53150 USA1-800-225-7593 ext. 113


Web: www.gldproducts.com

If you are instructed to return the product for service, you are responsible for ship-ping the unit at your expense to the above address in packaging that will protectagainst further damage. All warranty or repair requests require a Return Authoriza-tion Number prior to returning the item.

PRODUCT REGISTRATION

Important: The product registration form on page 15 must be completed and returnedalong with a copy of your receipt within 10 days of purchase to validate your warranty.

REGISTER YOUR PRODUCT Place postage here

Complete this form, include a copy of your receipt, fold, tape (do not staple) and return within 10 days of purchase. This protects your warranty and will help us develop new products!

GLD ProductsWarranty Department

S84 W19093 Enterprise DriveMuskego, WI 53150 USA

1. What are the top two reasons that influenced the purchase of this product? Select two.

Name Date of PurchaseAddress Phone-DayCity Phone-EveningState Zip Email

Purchase Price: Item: 64-0145 Phoenix MMXI 3 in 1 Billiard Table

Store Name:

Brand reputation Prior experience with another GLD productSaw in an advertisement Color/appearanceQuality/durability OtherValue for price

www.gldproducts.comGAME TABLES HOME CASINO

GAMES AND ACCESSORIES BILLIARD CUES

BILLIARD ACCESSORIES DARTBOARDS

SOFT-TIP DARTS STEEL-TIP DARTS

FLIGHTS AND SHAFTS DART CASES AND ACCESSORIES

Fold here second.

Fold here first.

Cut

her

e.

2. How did you become aware of this product? Select two.

3. Rate your satisfaction with each of the following?

4. Were there any parts missing?

5. Based on your experience, would you buy another GLD product?

6. Is this the first GLD product that you’ve owned? If No, what other product have you owned?:

7. Have you owned products from:

8. When did you decide to purchase this product?

9. How many times per month will you use it?

10. Are you the intended user of this product?

11. Where will you use this product?

12. Please tell us your gender? 13. And your marital status?

14. Age?

15. Which best describes your family income?

16. Education:

Remember to attach a copy of your receipt.

Saw in an advertisement Saw it in the storeSaw or used a friend’s or relative’s Recommended by another personReceived as a gift Other

Excellent Good Fair PoorAssembly instructionsEase of assemblyPackagingOverall product satisfaction

Yes No If so, which ones? Order No.

Yes No

Yes No

Sportcraft Harvard Classic Sport Other

Before entering the store. While in the store/impulse purchase

1 to 3 4 to 8 9 to 15 16 +

Yes No, indicate who:

Home Other:

Male Female Married Single

Under 25 25 - 40 40 - 60 Over 60

Under $25,000 $25,000 - $49,999 $50,000 - $99,999$100,000 - 149,999 $150,000 - $199,999 Over $200,000

Some high school College degreeCompleted high school Graduate degree

Phoenix MMXI 3 in 1 Billiard TableItem 64-0145


Parts Re-Order FormName DateAddress Phone-DayCity Phone-EveningState Zip Email

Order No. Description Unit Price Qty. Total

Amount1-213 Left Leg 15.001-214 Right Leg 15.001-215 Leg Support 10.001-217 Leg End Panel 15.002-180 1/4" x 2" Bolt 0.751-220 1/4" Washer 19 mm 0.202-12 1/4" Barrel Nut 0.251-11 5/16" x 2" Bolt 1.001-90 5/16" Washer 19 mm 0.201-218 Hockey Table With Table Tennis 110.001-219 Leg Leveler 10.002-21 Billiard Balls 30.002-27 Triangle 6.002-23 Cue 12.002-24 Chalk 2.001-221 Brush 5.002-18 Goalie 6.002-19 Hockey Felt 1.002-20 Hockey Puck 1.501-222 Table Tennis Post 4.008-5 Table Tennis Racket 6.008-4 Table Tennis Ball 1.001-223 Table Tennis Net 6.001-17 Wrench 1.002-116 Allen Wrench 1.001-225 Table Top Assembly 150.00

SubtotalShipping will be added. If paid by Check or Money Order, call for quote. S/H

5.1% Waukesha Wisconsin tax will apply (subject to change). TaxTotal

Mail To: GLD ProductsS84 W19093 Enterprise Drive

Muskego, WI 53150 USA1-800-225-7593 · FAX 800-841-6944

Email: [email protected] Site: www.gldproducts.com



Method of Payment_________Check or Money Order_________ Credit Card

_____ Visa _____ MasterCard _____ Discover _____ American ExpressCard #________________________________________________________Security Code #__________________Billing Address Zipcode____________Signature______________________________________Exp. Date________

Shipping AddressName___________________________________________________________________________________

Address___________________________________________Phone_________________________________

City______________________________________________State________________Zip________________

GAME TABLES

HOME CASINO

GAMES AND ACCESSORIES

BILLIARD CUES

BILLIARD ACCESSORIES

DARTBOARDS

SOFT-TIP DARTS

STEEL-TIP DARTS

FLIGHTS AND SHAFTS

DART CASES AND ACCESSORIES

www.gldproducts.com

PROUD MANUFACTURER OF

S84 W19093 Enterprise Drive • Muskego, WI 53150 USA262.679.8730 or 1.800.225.7593 tele262.679.8738 or 1.800.841.6944 fax

262.679.8739 international faxEmail: [email protected]

phoenix mmxi 7 foot 3 in 1 billiard tableplease read and understand all instructions before...

Documents