phoenix contact combicon accessories - … · 484 phoenix contact combicon accessories marking...
TRANSCRIPT
Inhalt 9 kaliert7% Breite s
484 PHOENIX CONTACT
COMBICON accessories Marking material, tools, test plugs
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
485PHOENIX CONTACT
An extensive range of accessories is available for COMBICON PCB terminal blocks and connectors.
Test plugs The single and multi-position test plugs
with spring-loaded lamellar contact allow an easy and safe contact of COMBICON plugs and PCB terminal blocks with a test connection.
Insertion bridges and fixed bridgesBridges allow potential distribution to
several terminal points or closing a circuit for testing purposes.
SK marking stripsThe 10-section marker strips are used
for consecutive numbering of PCB terminal blocks and connectors. The self-adhesive strips are arranged in several rows on a handy card and are available in all corresponding pitches.
ToolsPress-in punching sets are available for
proper assembly of press-in male connectors.
More tools for the operation of PCB terminal blocks and connectors and for crimping of ferrules and crimp contacts are available directly on the article pages under Accessories.
COMBICON accessories Marking material, tools, test plugs
SK marker cards 486
ZB/ZBF zack marker strip 492
Press-in devices 496
Crimp inserts 497
Insertion bridges 498
Fixed bridges 499
Mounting flanges 500
Keying tab MSTB 501
Guide rail pair FLRP/ICV 501
Pulling aid FKC 501
Ferrules 502
Test plugs 504
Dimensional drawings 508
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
Ordering data
General data
Material Polyester
Temperature range [°C] -40 ... 100
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Free from silicone and halogen
Description Color Type Order No.Pcs. /
Pkt.
Self-adhesive marker strips, unprinted, continuous, material
off the roll, for individual labeling with THERMOMARK X1... thermal
transfer printer, can be separated with the optional
THERMOMARK X1-CUTTER cutter, free pitch division, strip length
of up to 1000 mm, 14 strips, strip height 2.8 mm, 1 roll = 90 m
White SK 2,8 WH:REEL 0805205 1
Marker card, unprinted, DIN A 4 format, pitch as desired, self-
adhesive, with 50 stamped marker strips, strips 185 mm long, can
be labeled with the plotter, the laser printer or manually with the B-
STIFT or the X-PEN
White SK U/2,8 WH:UNBEDRUCKT 0803883 10
Marker card, printed horizontally, self-adhesive, 10-section
marking strips, 14 identical decades marked with 1-10, 11-20, etc.
up to 91-100, sufficient for 140 terminal blocks (SK 2,54...-SK
3,81... max. 2 characters per position)
White SK 2,54/2,8:FORTL.ZAHLEN 0804853 10
Marker card, special printing, self-adhesive, labeled acc. to
customer requirements, please specify the desired marking with
order, 14 identical marker strips per card, max. 25-position labeling
per strip (SK 2,54... -SK 3,81... max. 2 characters per position)
White SK 2,54/2,8:SO 0804879 1
Thermal transfer printer, incl. power supply unit, connecting
cable, Windows® printer driver and operating instructions, software
Gray THERMOMARK S1 5145313 1
Cutter, for THERMOMARK S1
THERMOMARK S1-CUTTER 5145339 1
External media hub, for THERMOMARK S1, maximum media
outer diameter up to 200 mm
THERMOMARK-ERH 200 5145342 1
Thermal transfer printer, incl. connecting cable, Windows®
printer driver and operating instructions, software
Gray THERMOMARK X1.1 5145274 1
Cutter, for THERMOMARK X1.1
THERMOMARK X1-CUTTER 5145290 1
Ink ribbon, length: 300 m, width: 110 mm, printing color: Black
THERMOMARK-RIBBON 110 5145384 1
Marker pen, refillable, for manual labeling, line thickness
0.35 mm, can be refilled with CMS-INK-RO-C5, delivered without ink
Black X-PEN 0,35 0811228 1
Marker pen, not refillable, for manual labeling, line thickness
0.5 mm
Black B-STIFT 1051993 10
486 PHOENIX CONTACT
THERMOMARK X1.1 THERMOMARK S1
X-PEN
Can be printed with:Marker cards SK Height of strip: 2.8 mm
COMBICON accessoriesSK marker cards
The SK self-adhesive marker strips can be used for all terminal blocks, modules and devices which do not have marker grooves. The strips are available in three heights: 2.8, 3.8 and 5 mm. Depending on the version, each card has 10, 12 or 14 marker strips which can be easily pulled off.
The cards are available labeled in the pitches of the following series:– Printed circuit terminal blocks– COMBICON connectors– MINI COMBICON connectors– COMBICON power connectors– Electronic housings
Unprinted and stamped material off the roll is available for individual marking and can be individually marked using the THERMOMARK S1... thermal transfer printer with an external media hub or the THERMOMARK X1... Using the optional cutter, the labeled marker strips can be detached at the corresponding length.
SK 2,54/2,8 ...
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
Polyester Polyester Polyester
-40 ... 100 -40 ... 100 -40 ... 100
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Free from silicone and halogen Free from silicone and halogen Free from silicone and halogen
Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
SK 2,8 WH:REEL 0805205 1 SK 2,8 WH:REEL 0805205 1 SK 2,8 WH:REEL 0805205 1
SK U/2,8 WH:UNBEDRUCKT 0803883 10 SK U/2,8 WH:UNBEDRUCKT 0803883 10 SK U/2,8 WH:UNBEDRUCKT 0803883 10
SK 3,5/2,8:FORTL.ZAHLEN 0804073 10 SK 3,81/2,8:FORTL.ZAHLEN 0804109 10 SK 5,08/2,8:FORTL.ZAHLEN 0804280 10
SK 3,5/2,8:SO 0805030 1 SK 3,81/2,8:SO 0805056 1 SK 5,08/2,8:SO 0805108 1
THERMOMARK S1 5145313 1 THERMOMARK S1 5145313 1 THERMOMARK S1 5145313 1
THERMOMARK S1-CUTTER 5145339 1 THERMOMARK S1-CUTTER 5145339 1 THERMOMARK S1-CUTTER 5145339 1
THERMOMARK-ERH 200 5145342 1 THERMOMARK-ERH 200 5145342 1 THERMOMARK-ERH 200 5145342 1
THERMOMARK X1.1 5145274 1 THERMOMARK X1.1 5145274 1 THERMOMARK X1.1 5145274 1
THERMOMARK X1-CUTTER 5145290 1 THERMOMARK X1-CUTTER 5145290 1 THERMOMARK X1-CUTTER 5145290 1
THERMOMARK-RIBBON 110 5145384 1 THERMOMARK-RIBBON 110 5145384 1 THERMOMARK-RIBBON 110 5145384 1
X-PEN 0,35 0811228 1 X-PEN 0,35 0811228 1 X-PEN 0,35 0811228 1
B-STIFT 1051993 10 B-STIFT 1051993 10 B-STIFT 1051993 10
487PHOENIX CONTACT
COMBICON accessoriesSK marker cards
SK 3,5/2,8 ... SK 3,81/2,8 ... SK 5,08/2,8 ...
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
Ordering data
General data
Material Polyester Polyester
Temperature range [°C] -40 ... 100 -40 ... 100
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components Free from silicone and halogen Free from silicone and halogen
Description Color Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
Self-adhesive marker strips, unprinted, continuous, material
off the roll, for individual labeling with THERMOMARK X1... thermal
transfer printer, can be separated with the optional
THERMOMARK X1-CUTTER cutter, free pitch division, strip length
of up to 1000 mm, 12 strips, strip height 3.8 mm, 1 roll = 90 m
White SK 3,8 WH:REEL 0805218 1 SK 3,8 WH:REEL 0805218 1
Marker card, unprinted, DIN A 4 format, pitch as desired, self-
adhesive, with 40 stamped marker strips, strips 185 mm long, can
be labeled with the plotter, the laser printer or manually with the
B-STIFT or the X-PEN
White SK U/3,8 WH:UNBEDRUCKT 0803906 10 SK U/3,8 WH:UNBEDRUCKT 0803906 10
Marker card, unprinted, with pitch divisions, self-adhesive,
10-section marker strip, 12 strips per card, can be labeled with
B-STIFT or X-PEN
White SK 5/3,8:UNBEDRUCKT 0805409 10 SK 5,08/3,8:UNBEDRUCKT 0805412 10
Marker card, printed horizontally, self-adhesive, 10-section
marker strip, 12 identical decades marked 0-9, sufficient for 120
terminal blocks
White SK 5,08/3,8: 0-9 0804303 10
Marker card, printed horizontally, self-adhesive, 10-section
marker strip, 12 identical decades marked, for example, with 1-10,
11-20 etc. up to 91-100, sufficient for 120 terminal blocks
White SK 5/3,8:FORTL.ZAHLEN 0804183 10 SK 5,08/3,8:FORTL.ZAHLEN 0804293 10
Marker card, special printing, self-adhesive, labeled acc. to
customer requirements, please specify the desired marking with
order, 12 identical marker strips per card, max. 25-position labeling
per strip
White SK 5/3,8:SO 0805072 1 SK 5,08/3,8:SO 0805085 1
Thermal transfer printer, incl. power supply unit, connecting
cable, Windows® printer driver and operating instructions, software
Gray THERMOMARK S1 5145313 1 THERMOMARK S1 5145313 1
Cutter, for THERMOMARK S1
THERMOMARK S1-CUTTER 5145339 1 THERMOMARK S1-CUTTER 5145339 1
External media hub, for THERMOMARK S1, maximum media
outer diameter up to 200 mm
THERMOMARK-ERH 200 5145342 1 THERMOMARK-ERH 200 5145342 1
Thermal transfer printer, incl. connecting cable, Windows®
printer driver and operating instructions, software
Gray THERMOMARK X1.1 5145274 1 THERMOMARK X1.1 5145274 1
Cutter, for THERMOMARK X1.1
THERMOMARK X1-CUTTER 5145290 1 THERMOMARK X1-CUTTER 5145290 1
Ink ribbon, length: 300 m, width: 110 mm, printing color: black
THERMOMARK-RIBBON 110 5145384 1 THERMOMARK-RIBBON 110 5145384 1
Marker pen, refillable, for manual labeling, line thickness
0.35 mm, can be refilled with CMS-INK-RO-C5, delivered without ink
Black X-PEN 0,35 0811228 1 X-PEN 0,35 0811228 1
Marker pen, not refillable, for manual labeling, line thickness
0.5 mm
Black B-STIFT 1051993 10 B-STIFT 1051993 10
488 PHOENIX CONTACT
SK 5/3,8 ... SK 5,08/3,8 ...
Marker cards SK Height of strip: 3.8 mm
COMBICON accessoriesSK marker cards
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
Polyester Polyester Polyester
-40 ... 100 -40 ... 100 -40 ... 100
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Free from silicone and halogen Free from silicone and halogen Free from silicone and halogen
Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
SK 3,8 WH:REEL 0805218 1 SK 3,8 WH:REEL 0805218 1 SK 3,8 WH:REEL 0805218 1
SK U/3,8 WH:UNBEDRUCKT 0803906 10 SK U/3,8 WH:UNBEDRUCKT 0803906 10 SK U/3,8 WH:UNBEDRUCKT 0803906 10
SK 6,2/3,8:UNBEDRUCKT 0805425 10
SK 6,2/3,8:FORTL.ZAHLEN 0804374 10 SK 7,5/3,8:FORTL.ZAHLEN 0804455 10 SK 7,62/3,8:FORTL.ZAHLEN 0804549 10
SK 6,2/3,8:SO 0805111 1 SK 7,5/3,8:SO 0805137 1 SK 7,62/3,8:SO 0805153 1
THERMOMARK S1 5145313 1 THERMOMARK S1 5145313 1 THERMOMARK S1 5145313 1
THERMOMARK S1-CUTTER 5145339 1 THERMOMARK S1-CUTTER 5145339 1 THERMOMARK S1-CUTTER 5145339 1
THERMOMARK-ERH 200 5145342 1 THERMOMARK-ERH 200 5145342 1 THERMOMARK-ERH 200 5145342 1
THERMOMARK X1.1 5145274 1 THERMOMARK X1.1 5145274 1 THERMOMARK X1.1 5145274 1
THERMOMARK X1-CUTTER 5145290 1 THERMOMARK X1-CUTTER 5145290 1 THERMOMARK X1-CUTTER 5145290 1
THERMOMARK-RIBBON 110 5145384 1 THERMOMARK-RIBBON 110 5145384 1 THERMOMARK-RIBBON 110 5145384 1
X-PEN 0,35 0811228 1 X-PEN 0,35 0811228 1 X-PEN 0,35 0811228 1
B-STIFT 1051993 10 B-STIFT 1051993 10 B-STIFT 1051993 10
489PHOENIX CONTACT
SK 6,2/3,8 ... SK 7,5/3,8 ... SK 7,62/3,8 ...
COMBICON accessoriesSK marker cards
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
Ordering data
General data
Material Polyester Polyester
Temperature range [°C] -40 ... 140 -40 ... 140
Wipe resistance DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Components Free from silicone and halogen Free from silicone and halogen
Description Color Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
Self-adhesive marker strips, unprinted, continuous, material
off the roll, for individual labeling with THERMOMARK X1... thermal
transfer printer, can be separated with the optional
THERMOMARK X1-CUTTER cutter, free pitch division, strip length
of up to 1000 mm, 10 strips, strip height 5.0 mm, 1 roll = 90 m
White SK 5,0 WH:REEL 0805221 1 SK 5,0 WH:REEL 0805221 1
Marker card, unprinted, DIN A 4 format, pitch as desired, self-
adhesive, with 35 stamped marker strips, strips 185 mm long, can
be labeled with the plotter, the laser printer or manually with the
B-STIFT or the X-PEN
White SK U/5,0 WH:UNBEDRUCKT 0803922 10 SK U/5,0 WH:UNBEDRUCKT 0803922 10
Marker card, printed horizontally, self-adhesive, 10-section
marker strip, 10 identical decades marked 1-10, 11-20 etc. up to
91-100, for example, sufficient for 100 terminal blocks
White SK 7,5/5:FORTL.ZAHLEN 0804468 10 SK 7,62/5:FORTL.ZAHLEN 0804552 10
Marker card, special printing, self-adhesive, labeled acc. to
customer requirements, please specify the desired marking with
order, 10 identical marker strips per card, max. 25-position labeling
per strip
White SK 7,5/5:SO 0805124 1 SK 7,62/5:SO 0805140 1
Thermal transfer printer, incl. power supply unit, connecting
cable, Windows® printer driver and operating instructions, software
Gray THERMOMARK S1 5145313 1 THERMOMARK S1 5145313 1
Cutter, for THERMOMARK S1
THERMOMARK S1-CUTTER 5145339 1 THERMOMARK S1-CUTTER 5145339 1
External media hub, for THERMOMARK S1, maximum media
outer diameter up to 200 mm
THERMOMARK-ERH 200 5145342 1 THERMOMARK-ERH 200 5145342 1
Thermal transfer printer, incl. connecting cable, Windows®
printer driver and operating instructions, software
Gray THERMOMARK X1.1 5145274 1 THERMOMARK X1.1 5145274 1
Cutter, for THERMOMARK X1.1
THERMOMARK X1-CUTTER 5145290 1 THERMOMARK X1-CUTTER 5145290 1
Ink ribbon, length: 300 m, width: 110 mm, printing color: black
THERMOMARK-RIBBON 110 5145384 1 THERMOMARK-RIBBON 110 5145384 1
Marker pen, refillable, for manual labeling, line thickness
0.35 mm, can be refilled with CMS-INK-RO-C5, delivered without ink
Black X-PEN 0,35 0811228 1 X-PEN 0,35 0811228 1
Marker pen, not refillable, for manual labeling, line thickness
0.5 mm
Black B-STIFT 1051993 10 B-STIFT 1051993 10
490 PHOENIX CONTACT
SK 7,5/5 ... SK 7,62/5 ...
Marker cards SK Height of strip: 5 mm
COMBICON accessoriesSK marker cards
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
Polyester Polyester Polyester
-40 ... 140 -40 ... 140 -40 ... 140
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Free from silicone and halogen Free from silicone and halogen Free from silicone and halogen
Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
SK 5,0 WH:REEL 0805221 1 SK 5,0 WH:REEL 0805221 1 SK 5,0 WH:REEL 0805221 1
SK U/5,0 WH:UNBEDRUCKT 0803922 10 SK U/5,0 WH:UNBEDRUCKT 0803922 10 SK U/5,0 WH:UNBEDRUCKT 0803922 10
SK 9,5/5:SO 0805069 1 SK 10/5:SO 0805179 1 SK 12,5/5:SO 0805182 1
THERMOMARK S1 5145313 1 THERMOMARK S1 5145313 1 THERMOMARK S1 5145313 1
THERMOMARK S1-CUTTER 5145339 1 THERMOMARK S1-CUTTER 5145339 1 THERMOMARK S1-CUTTER 5145339 1
THERMOMARK-ERH 200 5145342 1 THERMOMARK-ERH 200 5145342 1 THERMOMARK-ERH 200 5145342 1
THERMOMARK X1.1 5145274 1 THERMOMARK X1.1 5145274 1 THERMOMARK X1.1 5145274 1
THERMOMARK X1-CUTTER 5145290 1 THERMOMARK X1-CUTTER 5145290 1 THERMOMARK X1-CUTTER 5145290 1
THERMOMARK-RIBBON 110 5145384 1 THERMOMARK-RIBBON 110 5145384 1 THERMOMARK-RIBBON 110 5145384 1
X-PEN 0,35 0811228 1 X-PEN 0,35 0811228 1 X-PEN 0,35 0811228 1
B-STIFT 1051993 10 B-STIFT 1051993 10 B-STIFT 1051993 10
491PHOENIX CONTACT
SK 9,5/5 ... SK 10/5 ... SK 12,5/5 ...
COMBICON accessoriesSK marker cards
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
Ordering data
General data
Material PA
Inflammability class acc. to UL 94 V2
Temperature range [°C] -40 ... 100
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Free from silicone and halogen
Description Color Type Order No.Pcs. /
Pkt.
Zack marker strip, 10-section, unprinted: for individual labeling
with TML (101X9.5)R TR, X-PEN or CMS-P1-PLOTTER, sufficient
for the labeling of 100 terminal blocks per pack
White ZB 7,5:UNBEDRUCKT 0803948 10
As above, however, large batch, sufficient for 1000
terminal blocks
White
Zack marker strip, printed horizontally, 10-section, with
consecutive numbers, e.g. 1-10, 11-20, etc. up to 91-1001)
White
Zack marker strip, printed horizontally, 10-section, with same
numbers, e.g. 1/1/1, 2/2/2, etc. up to 100/100/1001)
White
Zack marker strip, 10-section, printed horizontally:
with L1, L2, L3, N, PE1)
White
U, V, W, N, 6 White
Zack marker strip, printed vertically, 10-section, with
consecutive numbers, e.g. 1-10, 11-20, etc. up to 91-1001)
White
Zack marker strip, special printing, 10-section, divisible,
marking according to customer requirements, please specify the
desired marking with order
White ZB 7,5:SO/CMS 0803964 1
Marking foil for zack marker strip unprinted, for thermal
transfer printer, perforated, 1 roll = 1000 strips, strip length:
101 mm, height of strip: 9.5 mm
Transparent TML (101X9,5)R TR 0816647 1
492 PHOENIX CONTACT
CMS-P1-PLOTTER X-PEN
Can be printed with:Zack marker strip ZB
COMBICON accessoriesZB/ZBF zack marker strip
1) 10 identically marked strips make up one packing unit (PU).
ZB 7,5 ...For terminal width 7.5 mm
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
PA PA
V2 V2
-40 ... 100 -40 ... 100
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Free from silicone and halogen Free from silicone and halogen
Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
ZB 7,62:UNBEDRUCKT 1054000 10 ZB 10:UNBEDRUCKT 1053001 10
ZB 7,62/WH-100:UNBEDRUCKT 5060922 100 ZB10/WH-100:UNBEDRUCKT 5060883 100
ZB 7,62,LGS:FORTL.ZAHLEN 1054233 10 ZB10,LGS:FORTL.ZAHLEN 1053014 10
ZB10,LGS:GLEICHE ZAHLEN 1053030 10
ZB10,LGS:L1-N,PE 1053412 10
ZB10,LGS:U-N 1053438 10
ZB10,QR:FORTL.ZAHLEN 1053027 10
ZB 7,62:SO/CMS 1050509 1 ZB10:SO/CMS 1050525 1
TML (101X9,5)R TR 0816647 1 TML (101X9,5)R TR 0816647 1
493PHOENIX CONTACT
COMBICON accessoriesZB/ZBF zack marker strip
ZB 7,62 ...For terminal width 7.62 mm
ZB 10 ...For terminal width 10.2 mm
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
Ordering data
General data
Material PA
Inflammability class acc. to UL 94 V2
Temperature range [°C] -40 ... 100
Wipe resistance DIN EN 61010-1 (VDE 0411-1)
Components Free from silicone and halogen
Description Color Type Order No.Pcs. /
Pkt.
Zack marker strip, flat,10-section, unprinted: for individual
labeling with TML (EX4,2)R TR, X-PEN or CMS P1 PLOTTER,
sufficient for labeling 100 terminal blocks per pack
White ZBF 5:UNBEDRUCKT 0808642 10
White ZBF 5/WH-100:UNBEDRUCKT 0808668 100
Zack marker strip, flat, 10-section, printed horizontally: with
consecutive numbers, e.g. 1-10, 11-20, etc. up to 991-10001)
White ZBF 5,LGS:FORTL.ZAHLEN 0808671 10
Zack marker strip, flat, printed horizontally, 10-section, with
even numbers, e.g. 2-20, 22-40, etc. up to 82-1001)
White ZBF 5,LGS:GERADE ZAHLEN 0810821 10
Zack marker strip, flat, printed horizontally, 10-section, with
odd numbers, e.g. 1-19, 21-39, etc. up to 81-991)
White ZBF 5,LGS:UNGERADE ZAHLEN 0810863 10
Zack marker strip, flat, printed vertically, 10-section, with
consecutive numbers, e.g. 1-10, 11-20, etc. up to 91-1001)
White ZBF 5,QR:FORTL.ZAHLEN 0808697 10
Zack marker strip, flat, special printing, 10-section, divisible,
marking according to customer requirements, please specify the
desired marking with order
White ZBF 5:SO/CMS 0808707 1
5-section White
Marking foil for Zack marker strip, flat, unprinted, for thermal
transfer printer, perforated, 1 roll = 1000 strips, strip length:
101 mm, height of strip: 4.2 mm
Transparent TML (101X4,2)R TR 0816621 1
494 PHOENIX CONTACT
CMS-P1-PLOTTER X-PEN
Can be printed with:Terminal block and module marking with flat zack marker strip
COMBICON accessoriesZB/ZBF zack marker strip
The ZBF flat zack marker strip is designed for marking terminal blocks, equipment and smaller modules with Phoenix Contact marker grooves.
The flat zack marker strip is available in all common pitches in labeled or unlabeled versions.
Further pitches and labelings are possible on request.1) 10 identically marked strips make up one packing unit (PU).
ZBF 5 ...For terminal width 5.2 mm
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
PA PA PA
V2 V2 V2
-40 ... 100 -40 ... 100 -40 ... 100
DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1) DIN EN 61010-1 (VDE 0411-1)
Free from silicone and halogen Free from silicone and halogen Free from silicone and halogen
Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
ZBF 7,5:UNBEDRUCKT 0809942 10 ZBF10:UNBEDRUCKT 0809997 10 ZBF 15:UNBEDRUCKT 0811202 10
ZBF 7,5,LGS:FORTL.ZAHLEN 0809955 10 ZBF10,LGS:FORTL.ZAHLEN 0810009 10
ZBF 7,5,QR:FORTL.ZAHLEN 0809968 10 ZBF10,QR:FORTL.ZAHLEN 0810025 10
ZBF 7,5:SO/CMS 0809971 1 ZBF10:SO/CMS 0809984 1
ZBF 15:SO/CMS 0814717 1
TML (101X4,2)R TR 0816621 1 TML (101X4,2)R TR 0816621 1 TML (101X4,2)R TR 0816621 1
495PHOENIX CONTACT
COMBICON accessoriesZB/ZBF zack marker strip
ZBF 7,5 ...For terminal width 7.5 mm
ZBF 10 ...For terminal width 10.2 mm
ZBF 15 ...For terminal width 15 mm
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
EMC 1,5-SH
Description Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
Stamp holder, for EMC press-in male connectors, for upper and
lower stamp
EMC 1,5-SH 1877258 1
Stamp set, for EMCV press-in male connectors, consisting of
upper and lower stamp for 3.81 mm pitch, 2 to 16-pos.
EMCV 1,5-SS 1 1877274 1
COMBICON accessoriesPress-in devices
EMCV 1,5-SS 1
EMSTB 2,5-SH
Description Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
Stamp holder, for EMSTB press-in male connectors, for upper
and lower stamp
EMSTB 2,5-SH 1877203 1
Stamp set, for EMSTBVA press-in male connectors, consisting of
lower stamp 2 to 24-pos. and upper stamp 2 to 16-pos.
EMSTBVA 2,5-SS-1-5,08 1877216 1
Upper stamp, 17-24-pos., 5.08 mm pitch EMSTBVA 2,5-SS-2-5,08 1877229 1
Upper stamp, 17-24-pos., 5.0 mm pitch EMSTBVA 2,5-SS-3-5,0 1914810 1
496 PHOENIX CONTACT
EMSTBVA 2,5-SS-1-5,08
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
MSTBC-MT...
Description Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
Module female contact, is inserted into the plug after the
conductor has been crimped; for conductors from
0.5 to 1.0 mm2 MSTBC-MT 0,5-1,0 3190564 100
0.5 to 1.0 mm2 ribbon contacts MSTBC-MT 0,5-1,0 BA 3190645 4000
1.5 to 2.5 mm2 MSTBC-MT 1,5-2,5 3190551 100
1.5 to 2.5 mm2 ribbon contacts MSTBC-MT 1,5-2,5 BA 3190658 3500
Module male contact, is inserted into the plug after the conductor
has been crimped; for conductors from
0.5 to 1.0 mm2 ICC-MT 0,5-1,0 3190577 100
0.5 to 1.0 mm2 ribbon contacts ICC-MT 0,5-1,0 BA 3190603 4000
1.5 to 2.5 mm2 ICC-MT 1,5-2,5 3190580 100
1.5 to 2.5 mm2 ribbon contacts ICC-MT 1,5-2,5 BA 3190593 4000
COMBICON accessoriesCrimp inserts
ICC-MT...
STZ ...-PCC 4-7,62
Description Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
Strain relief for MCC 1/...ST:.., for snapping into the latching
chambers of the plug components, can be labeled with ZB 6; for
plug components:
3 to 4-pos. STZ 2-PCC 4-7,62 1840214 50
5 to 10-pos. STZ 3-PCC 4-7,62 1840227 50
11 to 15-pos. STZ 5-PCC 4-7,62 GN 1842005 50
16 to 20-pos. STZ 8-PCC 4-7,62 1840230 50
Strain relief for MSTBC 2,5/... and ICC 2,5/..., for snapping into the
latching chambers of the plug components, can be labeled with ZB 6
2-pos. STZ 2-MSTBC-5,08 1810529 50
4-pos. STZ 4-MSTBC-5,08 1810532 50
8-pos. STZ 8-MSTBC-5,08 1810516 50
12-pos. STZ 12-MSTBC-5,08 1810503 50
497PHOENIX CONTACT
STZ ...-MSTBC-5,08
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
EBPL ...-3,81
Description Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
Insertion bridge, fully insulated, for connectors with a 3.81 mm
pitch
2-pos. EBPL 2-3,81 1733495 50
3-pos. EBPL 3-3,81 1733505 50
4-pos. EBPL 4-3,81 1733518 50
Insertion bridge, long contact area, divisible, fully insulated, for
connectors with 5.0 or 5.08 mm pitch
2-pos. EBL 2- 5 2303145 10
3-pos. EBL 3- 5 2303158 10
COMBICON accessoriesInsertion bridges
EBL ...- 5
EBP...- 5
Description Type Order No.Pcs. /
Pkt.
Insertion bridge, fully insulated, for plug connectors with 5.0 or
5.08 mm pitch
2-pos. EBP 2- 5 1733169 10
3-pos. EBP 3- 5 1733172 10
4-pos. EBP 4- 5 1733185 10
5-pos. EBP 5- 5 1733198 10
6-pos. EBP 6- 5 1733208 10
498 PHOENIX CONTACT
Please note the information on the bridges, see page 37.
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
FBSK ...-7,5
Description Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
Fixed bridge, for ZFKDS 4 PCB terminal blocks, fully insulated,
7.5 mm pitch1)
2-pos. FBSK 2-7,5 1928343 50
3-pos. FBSK 3-7,5 1928356 50
4-pos. FBSK 4-7,5 1928369 50
5-pos. FBSK 5-7,5 1928372 50
10-pos. FBSK 10-7,5 1928385 50
Fixed bridge, for ZFKDS 4 PCB terminal blocks, fully insulated,
10 mm pitch1)
2-pos. FBSK 2-10 1928398 50
3-pos. FBSK 3-10 1928408 50
4-pos. FBSK 4-10 1928411 50
5-pos. FBSK 5-10 1928424 50
10-pos. FBSK 10-10 1928437 50
COMBICON accessoriesFixed bridges
Please note the information on the bridges, see page 37.
1) Current carrying capacity 20 A. Laboratory data sheet available on
request.
FBSK...-10
FBSK ...-10/ZFKDS 10
Description Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
Fixed bridge, for ZFKDS 10 PCB terminal blocks, fully insulated,
10 mm pitch1)
2-pos. FBSK 2-10/ZFKDS 10 1986644 50
3-pos. FBSK 3-10/ZFKDS 10 1986657 50
4-pos. FBSK 4-10/ZFKDS 10 1986660 50
Fixed bridge, for ZFKDS 10 PCB terminal blocks, fully insulated,
pitch: 15 mm1)
2-pos. FBSK 2-15/ZFKDS 10 1986699 50
3-pos. FBSK 3-15/ZFKDS 10 1986686 50
4-pos. FBSK 4-15/ZFKDS 10 1986673 50
499PHOENIX CONTACT
Please note the information on the bridges, see page 37.
1) Current carrying capacity 57 A. Laboratory data sheet available on
request.
FBSK ...-15/ZFKDS 10
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
Description Type Order No.Pcs. /
Pkt.
Mounting flange, for fixing both ends of the header onto the PCB,
with M2 x 14 screws and nuts
MSTB-BF 1759981 50
Keying tab, for MSTB male connectors, for forming sections,
plugged onto the header pin, green insulating material
Pair of guide rails, inserted into the groove of ICV ...-G, for
accommodating a printed circuit board (mother/daughter PCB
connection) height: 86 mm, hole diameter: 3.4 mm
Strain relief, for FKIC plugs with 5.08 pitch, snapped into the
latching chambers of the plug components
4 to 7-pos.
≥ 8-pos.
500 PHOENIX CONTACT
MSTB-BFAdditional fastening for horizontal and vertical MSTB headers
COMBICON accessoriesMSTB mounting flange/keying tab
Please note the information on the mounting flanges, see page 36.
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
MSTB-BL 1755477 100
FLRP/ICV 80 1808353 10
STZ 4-FKC-5,08 1876877 50
STZ 8-FKC-5,08 1876880 50
501PHOENIX CONTACT
MSTB-BLInsertable keying tab
FLRP/ICV 80 STZ...-FKC-5,08
COMBICON accessoriesMSTB mounting flange/keying tab
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
b
h
dk
j
Inhalt 9 kaliert7% Breite s
Ordering data
General data
Material / coating E-CU / tin-plated (galvanic)
Description Cross section Color Dimensions [mm] Type Order No.Pcs.
Pkt.[mm2] AWG a b d h i j k
Ferrules, without plastic sleeves, CSA-certified
0.251) 24 Silver - 5.00 1.70 - - 0.15 0.80 A 0,25- 5 3202465 1000
0.251) 24 Silver - 7.00 1.70 - - 0.15 0.80 A 0,25- 7 3202478 1000
0.341) 22 Silver - 7.00 1.80 - - 0.15 0.90 A 0,34- 7 3009202 1000
0.5 20 Silver - 6.00 2.10 5.30 - 0.15 1.00 A 0,5 - 6 3200218 1000
0.51) 20 Silver - 8.00 2.10 7.30 - 0.15 1.00 A 0,5 - 8 3202481 1000
0.5 20 Silver - 10.00 2.10 9.30 - 0.15 1.00 A 0,5 -10 3202494 1000
0.75 18 Silver - 6.00 2.30 5.30 - 0.15 1.20 A 0,75- 6 3200221 1000
0.751) 18 Silver - 8.00 2.30 7.30 - 0.15 1.20 A 0,75- 8 3202504 1000
0.75 18 Silver - 10.00 2.30 9.30 - 0.15 1.20 A 0,75-10 3200234 1000
1 18 Silver - 6.00 2.50 5.30 - 0.15 1.40 A 1 - 6 3200247 1000
11) 18 Silver - 8.00 2.50 7.30 - 0.15 1.40 A 1 - 8 3202517 1000
1 18 Silver - 10.00 2.50 9.30 - 0.15 1.40 A 1 -10 3200250 1000
1.5 16 Silver - 7.00 2.80 6.00 - 0.15 1.70 A 1,5 - 7 3200263 1000
1.5 16 Silver - 10.00 2.80 9.00 - 0.15 1.80 A 1,5 -10 3200276 1000
1.5 16 Silver - 12.00 2.80 11.00 - 0.15 1.70 A 1,5 -12 3202588 1000
1.5 16 Silver - 15.00 2.80 14.00 - 0.15 1.70 A 1,5 -15 3202591 1000
1.5 16 Silver - 18.00 2.80 17.00 - 0.15 1.70 A 1,5 -18 3202601 1000
2.5 14 Silver - 7.00 3.40 6.00 - 0.15 2.20 A 2,5 - 7 3200289 1000
2.5 14 Silver - 12.00 3.40 11.00 - 0.15 2.20 A 2,5 -12 3200292 1000
2.5 14 Silver - 18.00 3.40 17.00 - 0.15 2.20 A 2,5 -18 3202821 1000
4 12 Silver - 9.00 4.00 8.00 - 0.20 2.80 A 4 - 9 3200302 1000
4 12 Silver - 12.00 4.00 11.00 - 0.20 2.80 A 4 -12 3200315 1000
4 12 Silver - 18.00 4.00 17.00 - 0.20 2.80 A 4 -18 3202834 1000
6 10 Silver - 10.00 4.70 9.00 - 0.20 3.50 A 6 -10 3202520 500
6 10 Silver - 12.00 4.70 11.00 - 0.20 3.50 A 6 -12 3200328 500
10 8 Silver - 12.00 5.80 10.80 - 0.20 4.50 A 10 -12 3200331 500
10 8 Silver - 18.00 5.80 16.80 - 0.20 4.50 A 10 -18 3200344 500
16 6 Silver - 12.00 7.50 10.50 - 0.20 5.80 A 16 -12 3200425 100
251) 4 Silver - 12.00 9.50 10.00 - 0.20 7.30 A 25 -12 3200357 100
25 4 Silver - 15.00 9.50 13.00 - 0.20 7.30 A 25 -15 3200360 100
25 4 Silver - 18.00 9.50 16.00 - 0.20 7.30 A 25 -18 3200373 100
251) 4 Silver - 20.00 9.50 18.00 - 0.20 7.30 A 25 -20 3200386 100
35 2 Silver - 18.00 11.00 16.00 - 0.20 8.30 A 35 -18 3200399 100
351) 2 Silver - 20.00 11.00 18.00 - 0.20 8.30 A 35 -20 3200409 100
A ...
502 PHOENIX CONTACT
Ferrules without plastic insulating sleeves from Phoenix Contact are made of soft electrolytic copper with tin plating.
The dimensions of the ferrules correspond to DIN 46228-1.
Ferrules without insulating collar, in acc. with DIN 46228 -1
COMBICON accessoriesFerrules
For more technical data, drawings and accessories, visit
www.phoenixcontact.net/eshop.
1) These ferrules are not included in DIN 46228-4:1990-09.
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
i
d
j
k
b
h
Inhalt 9 kaliert7% Breite s
Ordering data
General data
Material / coating E-CU / tin-plated (galvanic)
Plastic sleeve material Polypropylene
Long/short-term temperature 105°C / 120°C
Description Cross section Color Dimensions [mm] Type Order No.Pcs.
Pkt.[mm2] AWG a b d h i j k
Ferrules, with plastic sleeve, color range as per DIN 46228-4:
1990-09, CSA-certified
0.251) 24 Yellow - 10.50 2.00 6.00 0.25 0.15 0.80 AI 0,25- 6 YE 3203024 100
0.251) 24 Yellow - 12.50 2.00 8.00 0.25 0.15 0.80 AI 0,25- 8 YE 3203037 100
0.5 20 White - 12.00 2.50 6.00 0.25 0.15 1.10 AI 0,5 - 6 WH 3200687 100
0.5 20 White - 14.00 2.50 8.00 0.25 0.15 1.10 AI 0,5 - 8 WH 3200014 100
0.5 20 White - 14.00 2.50 8.00 0.25 0.15 1.10 AI 0,5 - 8 WH -1000 3200881 1000
0.5 20 White - 16.00 2.50 10.00 0.25 0.15 1.10 AI 0,5 -10 WH 3201275 100
0.51) 20 White - 18.00 2.50 12.00 0.25 0.15 1.10 AI 0,5 -12 WH 3200506 100
0.75 18 Gray - 12.00 2.80 6.00 0.25 0.15 1.30 AI 0,75- 6 GY 3200690 100
0.75 18 Gray - 14.00 2.80 8.00 0.25 0.15 1.30 AI 0,75- 8 GY 3200519 100
0.75 18 Gray - 14.00 2.80 8.00 0.25 0.15 1.30 AI 0,75- 8 GY -1000 3200894 1000
0.75 18 Gray - 16.00 2.80 10.00 0.25 0.15 1.30 AI 0,75-10 GY 3201288 100
0.75 18 Gray - 18.00 2.80 12.00 0.25 0.15 1.30 AI 0,75-12 GY 3200849 100
1 18 Red - 12.00 3.00 6.00 0.30 0.15 1.50 AI 1 - 6 RD 3200742 100
1 18 Red - 14.00 3.00 8.00 0.30 0.15 1.50 AI 1 - 8 RD 3200030 100
1 18 Red - 14.00 3.00 8.00 0.30 0.15 1.50 AI 1 - 8 RD -1000 3200904 1000
1 18 Red - 16.00 3.00 10.00 0.30 0.15 1.50 AI 1 -10 RD 3200182 100
1 18 Red - 18.00 3.00 12.00 0.30 0.15 1.50 AI 1 -12 RD 3200674 100
1.51) 16 Black - 12.00 3.40 6.00 0.30 0.15 1.80 AI 1,5 - 6 BK 3200755 100
1.5 16 Black - 14.00 3.40 8.00 0.30 0.15 1.80 AI 1,5 - 8 BK 3200043 100
1.5 16 Black - 14.00 3.40 8.00 0.30 0.15 1.80 AI 1,5 - 8 BK -1000 3200917 1000
1.5 16 Black - 18.00 3.40 10.00 0.30 0.15 1.80 AI 1,5 -10 BK 3200195 100
1.5 16 Black - 18.50 3.40 12.00 0.30 0.15 1.80 AI 1,5 -12 BK 3201482 100
1.5 16 Black - 24.00 3.40 18.00 0.30 0.15 1.80 AI 1,5 -18 BK 3200056 100
2.5 14 Blue - 14.00 4.20 8.00 0.30 0.15 2.30 AI 2,5 - 8 BU 3200522 100
2.5 14 Blue - 14.00 4.20 8.00 0.30 0.15 2.30 AI 2,5 - 8 BU -1000 3200920 1000
2.51) 14 Blue - 17.00 4.20 10.00 0.30 0.15 2.30 AI 2,5 -10 BU 3202533 100
2.5 14 Blue - 18.00 4.20 12.00 0.30 0.15 2.30 AI 2,5 -12 BU 3200962 100
2.5 14 Blue - 24.00 4.20 18.00 0.30 0.15 2.30 AI 2,5 -18 BU 3200580 100
4 12 Gray - 17.00 4.80 10.00 0.30 0.20 2.80 AI 4 -10 GY 3200535 100
4 12 Gray - 19.00 4.80 12.00 0.30 0.20 2.80 AI 4 -12 GY 3200959 100
4 12 Gray - 26.00 4.80 18.00 0.30 0.20 2.80 AI 4 -18 GY 3200593 100
6 10 Yellow - 20.00 6.20 12.00 0.30 0.20 3.50 AI 6 -12 YE 3200548 100
6 10 Yellow - 26.00 6.20 18.00 0.30 0.20 3.50 AI 6 -18 YE 3200603 100
10 8 Red - 22.00 7.50 12.00 0.30 0.20 4.60 AI 10 -12 RD 3200551 100
10 8 Red - 28.00 7.50 18.00 0.30 0.20 4.60 AI 10 -18 RD 3200616 100
16 6 Blue - 24.00 8.80 12.00 0.40 0.20 5.80 AI 16 -12 BU 3200564 100
16 6 Blue - 28.00 8.80 18.00 0.40 0.20 5.80 AI 16 -18 BU 3200629 100
25 4 Yellow - 30.00 11.00 16.00 0.50 0.20 7.30 AI 25 -16 YE 3200577 50
25 4 Yellow - 32.00 11.00 18.00 0.50 0.20 7.30 AI 25 -18 YE 3201505 50
25 4 Yellow - 35.00 11.00 22.00 0.50 0.20 7.30 AI 25 -22 YE 3200700 50
35 2 Red - 30.00 12.50 16.00 0.50 0.20 8.30 AI 35 -16 RD 3200441 50
35 2 Red - 32.00 12.50 18.00 0.50 0.20 8.30 AI 35 -18 RD 3201495 50
35 2 Red - 39.00 12.50 25.00 0.50 0.20 8.30 AI 35 -25 RD 3200713 50
50 1/0 Blue - 36.00 15.00 20.00 0.60 0.35 10.30 AI 50 -20 BU 3200454 50
50 1/0 Blue - 40.00 15.00 25.00 0.60 0.35 10.30 AI 50 -25 BU 3200726 25
701) 2 Yellow - 37.00 16.00 20.00 0.60 0.35 12.70 AI 70 -20 YE 3201848 25
951) 4 Red - 44.00 18.00 25.00 0.60 0.35 14.70 AI 95 -25 RD 3201853 25
1201) 5 Blue - 48.00 21.00 27.00 0.70 0.45 16.70 AI120 -27 BU 3201822 25
AI ...
503PHOENIX CONTACT
Ferrules with plastic insulating sleeves from Phoenix Contact are made of soft electrolytic copper with tin plating.
The insulation reliability of close connections is increased, and the splicing of wires is prevented.
Ferrules with insulating collar, in acc. with DIN 46228-4
COMBICON accessoriesFerrules
For more technical data, drawings and accessories, visit
www.phoenixcontact.net/eshop.
1) These ferrules are not included in DIN 46228-4:1990-09.
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
2510
46
16
,5
Inhalt 9 kaliert7% Breite s
Description Type Order No.Pcs. /
Pkt.
Test plug, 5-pos., 5/5.08 mm pitch with 2 mm Ø test pins, gold-
plated test pins
ST-MKDSP 3/5 1718207 10
Test plug, 10-pos., 5/5.08 mm pitch with 2 mm Ø lamellar pins and
10 firmly welded 1 m test conductors, gold-plated lamellar pins
Test plug, 5-position, 5/5.08 mm pitch, with special multiple-spring
wire connector, makes contact in the connection space
Test plug, 5-position, 7.5/7.62 mm pitch, with special multiple-
spring wire connector, makes contact in the connection space
Technical data
Single-wire/terminal point, stranded 0.14 mm² - 0.75 mm²
Single-wire/terminal point, AWG 26 - 18
Nominal current IN
2 A
Nominal voltage UN
125 V
504 PHOENIX CONTACT
ST-MKDSP 3/55-position test plug
COMBICON accessoriesTest plugs
COMBICON Select
The combination options of the connectors are documented in
COMBICON Select. See:
www.phoenixcontact.net/searchassistants
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
504
15
15
,5
24,96
35
12
37,46
35
12
Inhalt 9 kaliert7% Breite s
Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
SPB 10-MKDSP 1301355 5
SPB 5-MKDS 3 1301216 10
SPB 5-GMKDS 3 1301203 10
0.75 mm² 0.75 mm² 0.75 mm²
- - -
2 A 2 A 2 A
125 V 25 V 25 V
505PHOENIX CONTACT
SPB 10-MKDSP10-pos. test plug, with 10 welded-on test conductors
SPB 5-MKDS 35-pos. test plug contacted in the conductor connection space
SPB 5-GMKDS 3
COMBICON accessoriesTest plugs
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
MPS-...
Description Color Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
Test connector, consisting of: metal part for 2.3 mm Ø socket
hole and
MPS-MT 0201744 10
Insulating sleeve for MPS metal part White MPS-IH WH 0201663 10
Red MPS-IH RD 0201676 10
Blue MPS-IH BU 0201689 10
Yellow MPS-IH YE 0201692 10
Green MPS-IH GN 0201702 10
Violet MPS-IH VT 0201715 10
Gray MPS-IH GY 0201728 10
Black MPS-IH BK 0201731 10
Test plug, consisting of 1 mm Ø test pin, conductor length
150 mm and socket Ø 2 mm
MPS-MT 1-S 1944372 1
MPS-MT 1-S4-B RD 1982800 50
COMBICON accessoriesTest plugs
For more technical data, drawings and accessories, visit
www.phoenixcontact.net/eshop.
MPS-MT 1-S
PS ...
Description Color Type Order No.Pcs. /
Pkt.Type Order No.
Pcs. /
Pkt.
Test plug, consisting of: metal part for 4 mm Ø socket hole
and
PS-MT 0311647 10
Insulating sleeve for PS metal part White PS-IH WH 0311566 10
Red PS-IH RD 0311579 10
Blue PS-IH BU 0311582 10
Yellow PS-IH YE 0311595 10
Green PS-IH GN 0311605 10
Violet PS-IH VT 0311618 10
Gray PS-IH GY 0311621 10
Black PS-IH BK 0311634 10
Reducing connector, for connecting a 4 mm Ø test plug to a
2.3 mm Ø test socket
Gray RPS 0201647 10
506 PHOENIX CONTACT
RPS
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
Inhalt 9 kaliert7% Breite s
507PHOENIX CONTACT
COMBICON accessoriesTest plugs
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
1,5
16
42
44
40,4 12,7
1,5
16
42
44
40,4 12,7
1,90,6
4,3
2,5
1,5
12
42
32
28,4 11,7
1,5
12
42
32
28,4 11,7
2,89 0,61
2,9
5
3,5
11,2
1,5
16
42
72
68,5 11,2
1,5
16
42
72
68,5
2,89 0,61
2,9
5
3,5
3,2 0,61
2,9
5
3,81
Inhalt 9 kaliert7% Breite s
COMBICONTape drawings/path geometry/free spaces
MC 0,5-R44 even, see page 139. MC 0,5-R44 odd, see page 139. MC 0,5, see page 139.
MC 1,5-R32 even, see page 160. MC 1,5-R32 odd, see page 160. MC 1,5, see page 160.
MC 1,5-R72 even, see page 160. MC 1,5-R72 odd, see page 160. MC 1,5, see page 160.
508 PHOENIX CONTACT
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
1,5
16
42
44
40,4 15,8
1,90,6
5,7
5
2,5
67
5
8
9,9
==
10,1
11,1
1,5
12 4
2
56
52,4 11,7
1,5
12 4
2
56
52,4 11,7
3,2 0,61
2,9
5
3,81
21,05
44
40,4
1,5
20
42
1,4
3
55
51
,5
2,50,3
19,95
16
14,65 0,7
9,15
6
4,6
3
18
Inhalt 9 kaliert7% Breite s
COMBICONTape drawings/path geometry/free spaces
MCV 0,5-R44, see page 139. MCV 0,5-R44, see page 139.
MC 1,5-R56 even, see page 160. MC 1,5-R56 odd, see page 160. MCV 1,5, see page 160.
MSTBO 2,5 THR R44, see page 244. MSTBO 2,5/...THR R44, see page 244.
509PHOENIX CONTACT
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
1,5
16
42
32
28,4 14,9
2,890,61
3
3,5
3,20,61
3
3,81
9,2
10,26
7
5
8
9,9
==
14,8
1,5
20
42
56
52,4
1,5
16
42
32
28,4 12,7
1,5
16
42
32
28,4 12,7
4,0
5
2
0,5
5 4,42 0,66
5,08
13,6
1,5
16 4
2
88
84,4 13,6
1,5
16
42
88
84,4
4,0
5
2
0,5
5 4,42 0,66
5,08
Inhalt 9 kaliert7% Breite s
COMBICONTape drawings/path geometry/free spaces
MCV 1,5-R32, see page 166. MCV 1,5-R32-G-THT, see page 166. MCV 1,5-R56, see page 166.
CC 2,5-R32 even, see page 238. CC 2,5-R32 odd, see page 238. CC 2,5-R32-G-THR, see page 238.
CC 2,5-R88 even, see page 238. CC 2,5-R88 odd, see page 238. CC 2,5-R88-G-THT, see page 238.
510 PHOENIX CONTACT
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
2,890,61
3
3,5
3,20,61
3
3,81
9,2
10,2
67
5
8
9,9
==
14,5
1,5
16
42
72
68,4
2,890,61
3
3,5
3,20,61
3
3,81
9,2
10,2
67
5
8
9,9
==
12,7
1,5
16
42
56
52,4 12,7
1,5
16
42
56
52,4
4,0
5
2
0,5
5 4,42 0,66
5,08
44
40,4
4
16
21
,5
5,7
44
40,4
4
16
21
,5
5,7
44
40,4
4
16
21
,5
11,1
Inhalt 9 kaliert7% Breite s
COMBICONTape drawings/path geometry/free spaces
MCV 1,5-R56-G-THT PAD, see page 166. MCV 1,5-R72, see page 166.
CC 2,5-R56 even, see page 238. CC 2,5-R56 odd, see page 238.
MCV 1,5-R72-THT PAD, see page 166.
CC 2,5-R56-G-THR, see page 238.
511PHOENIX CONTACT
PTSM 0,5/...-H-SMD R44 even, see page 465. PTSM 0,5/...-H-SMD R44 odd, see page 465. PTSM 0,5/...-V-SMD R44 even, see page 465.
For odd numbers of positions, see data sheet
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
17,8
1,5
24
42
32
28,4
5,7
3,9
1,2
4,42 0,66
5,08
12
13
9
12
==
11
,6
77
,7
17,8
1,5
24
42
56
52,4
12
42
24
22,25 15,1 15,1
16
42
56
52,4
==
10,54
,35
,5
13,8
10
9,2
20,5±0,13
11
,4±
0,1
3
25±0,13
10°±1°
32
28,4 8,3
4
16
21
,5
44
40,4 14,1
4
16
21
,5
Inhalt 9 kaliert7% Breite s
COMBICONTape drawings/path geometry/free spaces
CCV 2,5-R32, see page 240. CCV 2,5-R32, see page 240. CCV 2,5-R56, see page 240.
PST 1,0-R24, see page 479. PST 1,0-R56, see page 479. PST 1,0, see page 479.
512 PHOENIX CONTACT
Mounting cutout in accordance with DIN 41652-3 for wall
thicknesses up to 2.0 mm
PSC 1,5/3..M(-PE),
see page 301.
PTSM 0,5/..-H THR R32 see page 463.
For belts for odd nos. of pos., see data sheet
PTSM 0,5/..-V THR R44 see page 463.
For belts for odd numbers of positions, see data sheet
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
5,7
3,9
1,2
4,42 0,66
5,08
12
13
9
12
==
11
,6
77
,7
16,6
1,5
20
42
88
84,4
5,7
3,9
1,2
4,42 0,66
5,08
12
13
9
12
==
11
,6
77
,7
12
42
24
22,25 15,1 15,1
16
42
56
52,4
==
10,55
,95
3,8
5
13,8
10,3
9,5
28,8±0,13
11
,4±
0,1
3
33,3±0,13
10°±1°
20,5±0,13
11
,4±
0,1
3
6,2
25±0,13
10°±1°
28,8±0,13
11
,4±
0,1
3
6,2
33,3±0,13
10°±1°
Inhalt 9 kaliert7% Breite s
COMBICONTape drawings/path geometry/free spaces
CCV 2,5-R56, see page 240. CCV 2,5-R88, see page 240.
PST 1,3-R24, see page 481. PST 1,3-R56, see page 481.
CCV 2,5-R88, see page 240.
PST 1,3, see page 481.
513PHOENIX CONTACT
Mounting cutout in accordance with DIN 41652-3 for wall
thicknesses up to 2.0 mm
PSC 1,5/5..M(-PE),
see page 301.
Mounting cutout in accordance with DIN 41652-3 for wall
thicknesses up to 4.5 mm
PSC 1,5/3..M(-PE),
see page 301.
Mounting cutout in accordance with DIN 41652-3 for wall
thicknesses up to 4.5 mm
PSC 1,5/5..M(-PE),
see page 301.
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
c+0,2
11,2
50
,1±
b 0,1±
2,3
2,8
8,7
0,2
±
3,4
a
a+20,32
1,8
55
,08
1,4
30°
2
5 a
2,5
-10
45
4
a+10,1
Ø1,4
86
12
3,4
1,4
a
a+20,76
1,8
55
,08
30°
2
5,25a
2,5
-10
45
4
a+10,5
Ø1,4
86
12
8,3
37
19,8a
c
5,3
b
3,5
13
,5+
0,5
1,3
Inhalt 9 kaliert7% Breite s
COMBICONSheet metal cutout dimensions, drilling diagrams, dimensional drawings
Sheet metal cutout dimensions DFK-MC 1,5/...-GF
see page 188.
No. of positions b c
2 13.81 18.50
3 17.62 22.30
4 21.43 26.10
5 25.24 29.90
6 29.05 33.80
7 32.86 37.60
8 36.67 41.40
9 40.48 45.10
10 44.29 49.00
11 48.10 52.80
12 51.91 56.60
13 55.72 60.40
14 59.53 64.20
15 63.34 68.00
16 67.15 71.90
Cable housing Plug components
KGG-MSTB 2,5/3 GMSTB 2,5/2-ST*
KGG-MSTB 2,5/4 GMSTB 2,5/3-ST
KGG-MSTB 2,5/6 GMSTB 2,5/4-ST*
KGG-MSTB 2,5/7 GMSTB 2,5/5-ST
KGS-MSTB 2,5/9 GMSTB 2,5/6-ST*
KGS-MSTB 2,5/10 GMSTB 2,5/7-ST
KGS-MSTB 2,5/12 GMSTB 2,5/8-ST*
KGS-MSTB 2,5/13 GMSTB 2,5/9-ST
KGS-MSTB 2,5/15 GMSTB 2,5/10-ST*
KGS-MSTB 2,5/16 GMSTB 2,5/11-ST
KGS-MSTB 2,5/18 GMSTB 2,5/12-ST*
No. of positions b c
2 21.00 26.83
3 26.08 31.91
4 31.16 36.99
5 36.24 42.07
6 41.32 47.15
7 46.40 52.23
8 51.48 57.31
9 56.56 62.39
10 61.64 67.47
11 66.72 72.55
12 71.80 77.63
13 76.88 82.71
14 81.96 87.79
15 87.04 92.87
16 92.12 97.95
PCB cutout ICV 2,5/...G-5,08 with FLRP-ICV 80 ,
see page 265.
FLRP-ICV 80, see page 264.
Drilling diagram GICV 2,5/...-G-7,62 with FLRP-ICV,
see page 279.
PCB cutout GICV 2,5/...-G-5,08 with FLRP-ICV 80,
see page 279.
FLRP-ICV 80, see page 278.
KGG-MSTB 2,5/..., see page 280.
Sheet metal cutout dimensions IC-DFR..., see page 282.
Drilling diagram ICV 2,5/...-G-5,08 with FLRP-ICV 80,
see page 265.
Adjacent KGG-MSTB 2,5 or KGS-MSTB 2,5 can be combined
with GMSTB 2,5/...ST and GMSTB 2,5/...ST-7,62.
* The pitch of the cable housing is approximately 2 mm wider
than that of the plug components.
514 PHOENIX CONTACT
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com
3,2
b 0,1±
c 0,1±
12
0,1
±
11
0,1
±
3,6
3,6
3,2
b 0,1±
c 0,1±
12
0,1
±
11
0,1
±
6,5
0,1
±
4,1 0,1±
c 0,1±
10,4
0,2
±
4,1
0,1
±
b 0,2±
3,2+0,1
2,541,5
2,5
43,1
1,1
6,2
2,54
3,1
3,5
8,5
8,08
2,541,5
2,4 3,5
5,6
5
1,5
1,2
1,2
2,4 3,5
5,6
5
3,5
1,5
1,2
1,2
11,3
3,5
4,45
9,9
8,3
2,4 3,5
11,8
2,4 3,5
11,3
3,5
4,45
9,9
3
3,3 a
16
,2
22
1,0 - 1,2
3
3,3 a
16
,2
22
,4
1,4 - 1,6
Inhalt 9 kaliert7% Breite s
COMBICONSheet metal cutout dimensions, drilling diagrams, dimensional drawings
Cutout dimensions DFK-MSTB(V)A 2,5/...-G(F), see page 286.
No. of
positions
Pitch 5.0 Pitch 5.08
b c b c
2 12.7 20 13.18 20.32
3 17.7 25 18.26 25.40
4 22.7 30 23.34 30.48
5 27.7 35 28.42 35.56
6 32.7 40 33.50 40.64
7 37.7 45 38.58 45.72
8 42.7 50 43.66 50.80
9 47.7 55 48.74 55.88
10 52.7 60 53.82 60.96
11 57.7 65 58.90 66.04
12 62.7 70 63.98 71.12
13 67.7 75 69.06 76.20
14 72.7 80 74.14 81.28
15 77.7 85 79.22 86.36
16 82.7 90 84.30 91.44
No. of
positions
DFK...-G DFK...-GF
b c b c
2 12.54 19.76 20.65 29.92
3 17.62 24.84 25.73 35.00
4 22.70 29.92 30.81 40.08
5 27.78 35.00 35.89 45.16
6 32.86 40.08 40.97 50.24
7 37.94 45.16 46.05 55.32
8 43.02 50.24 51.13 60.40
9 48.10 55.32 56.21 65.48
10 53.18 60.40 61.29 70.56
11 58.26 65.48 66.37 75.64
12 63.34 70.56 71.45 80.72
13 68.42 75.64 76.53 85.80
14 73.50 80.72 81.61 90.88
15 78.58 85.80 86.69 95.96
16 83.66 90.88 91.77 101.04
Sheet metal cutouts DFK-MSTB 2,5/...-G see page 284. Sheet metal cutouts DFK-MSTB 2,5/...-GF see page 285.
MKDSFW 1,5/2-3,5 (with locating pin, see page 55).
MKDSFW 1,5/3-3,5 (with locating pin, see page 55).
515PHOENIX CONTACT
MPT 0,5/...-2,54, 4 to 12 positions, see page 51.Drilling diagram MPT 0,5/...-2,54, 2 to 3 positions
The 2 and 3-position versions have an additional locating pin
(1.5 mm long) to support the mechanical load.
Drilling diagram MKDSFW 1,5/2-3,5
Drilling diagram MKDSFW 1,5/3-3,5
Panel feed-through CIOC...FL, see page 305.
Dimension a = 6.5 mm
Panel feed-through CIOC...FL, see page 305.
Dimension a = 6.5 mm
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 [email protected] - 800-843-9859 - www.powermation.com