PHE NordicYour independent service provider for Plate Heat Exchangers

• All Brand Service

• Quick and Reliable Service

• Skilled Service Team

• Fully Equipped

PHE Nordic ApSBaaringvad 18 - DK-5580 Nr. Aaby - Denmark - Phone: +45 70 202 303 - Fax: +45 70 202 404

VAT No. DK 31 89 48 32 - CVR No. 31 89 48 32 - E-Mail: phe@phe-nordic.com - www.phe-nordic.com

PHE Nordic ApSBaaringvad 18 - DK-5580 Nr. Aaby - Denmark - Phone: +45 70 202 303 - Fax: +45 70 202 404

VAT No. DK 31 89 48 32 - CVR No. 31 89 48 32 - E-Mail: phe@phe-nordic.com - www.phe-nordic.com

We are working for the following Industries:

The PHE Nordic Team is looking forward to serve you.

MarinePower plantsDairies / Cheese factoriesFood industriesSugar / Distilleries

BreweriesSanitary applicationsCosmeticsPharmaceuticalChemical industries

All brand ServiceWe are able to offer you a comprehensive cleaning and re-gasket Service, not only for our own Kähler &

Breum plate heat exchangers, but also for exchangers manufactured by other companies.

Service TeamWe have our own Service Team fully trained Service Engineers traveling worldwide to mantle and dismantle plate heat exchangers.In Denmark the Service Team brings the plate packs to PHE Nordicfor cleaning and renovation.

Cleaning of platesAfter reception we check all the plates and remove the old gaskets. One more check is made before cleaning the plates in big tanks. We use chemically alkaline/acid method of high efficiency without damaging the plates. The chemicals are carefully selected dependingon the type of soiling.

Crack test of platesWhen the plates are cleaned and the gasket tracks are checked. We are able to carry out a crack test. It is done using dye penetrate in order to find any cracks or even the smallest possible pinholes. After crack test we make a high pressure cleaning to removing the residues from the dye penetration test.

Re-gasketAfter cleaning and crack testing, we add new gaskets on the plates.We use different types of Glue depending on the material of the gaskets and the use of the plate heat exchanger. We put the plate pack in a big oven to cure the polymerisation precise to ensure a perfect gluing and gasket fit. Then we make a final check and despatch.

PHE Nordic GasketsOur commitment is to offer you the best material to ensure the best durability during its

application in any situation. The gaskets are adaptable to the most widely used equipment on the market.

• APV • Alfa-Laval • Nirex • Gea Ahlborn • Fischer• Schmidt – Bretten • Stork • Junkers • Reheat • Rosenblads • Swep • Kähler & Breum • Tranter • Sondex

One of the Service Engineers sampling a PHE unit on a power plant

Plate pack undergoing chemical cleaning

Dye penetrate crack test is carried out

Gluing on new gaskets on a well venti-lated table

Plate pack is compressed and baked in an oven in order to make the glue cure

Production of our high quality gaskets

The newest eqiupment in the quality department makes it possible to

monitor the quality of the gaskets

A new set of NBR gaskets ready to glue on

All brand ServiceWe are able to offer you a comprehensive cleaning and re-gasket Service, not only for our own Kähler &

Breum plate heat exchangers, but also for exchangers manufactured by other companies.

Service TeamWe have our own Service Team fully trained Service Engineers traveling worldwide to mantle and dismantle plate heat exchangers.In Denmark the Service Team brings the plate packs to PHE Nordicfor cleaning and renovation.

Cleaning of platesAfter reception we check all the plates and remove the old gaskets. One more check is made before cleaning the plates in big tanks. We use chemically alkaline/acid method of high efficiency without damaging the plates. The chemicals are carefully selected dependingon the type of soiling.

Crack test of platesWhen the plates are cleaned and the gasket tracks are checked. We are able to carry out a crack test. It is done using dye penetrate in order to find any cracks or even the smallest possible pinholes. After crack test we make a high pressure cleaning to removing the residues from the dye penetration test.

Re-gasketAfter cleaning and crack testing, we add new gaskets on the plates.We use different types of Glue depending on the material of the gaskets and the use of the plate heat exchanger. We put the plate pack in a big oven to cure the polymerisation precise to ensure a perfect gluing and gasket fit. Then we make a final check and despatch.

PHE Nordic GasketsOur commitment is to offer you the best material to ensure the best durability during its

application in any situation. The gaskets are adaptable to the most widely used equipment on the market.

• APV • Alfa-Laval • Nirex • Gea Ahlborn • Fischer• Schmidt – Bretten • Stork • Junkers • Reheat • Rosenblads • Swep • Kähler & Breum • Tranter • Sondex

One of the Service Engineers sampling a PHE unit on a power plant

Plate pack undergoing chemical cleaning

Dye penetrate crack test is carried out

Gluing on new gaskets on a well venti-lated table

Plate pack is compressed and baked in an oven in order to make the glue cure

Production of our high quality gaskets

The newest eqiupment in the quality department makes it possible to

monitor the quality of the gaskets

A new set of NBR gaskets ready to glue on

PHE NordicYour independent service provider for Plate Heat Exchangers

• All Brand Service

• Quick and Reliable Service

• Skilled Service Team

• Fully Equipped

PHE Nordic ApSBaaringvad 18 - DK-5580 Nr. Aaby - Denmark - Phone: +45 70 202 303 - Fax: +45 70 202 404

VAT No. DK 31 89 48 32 - CVR No. 31 89 48 32 - E-Mail: phe@phe-nordic.com - www.phe-nordic.com

PHE Nordic ApSBaaringvad 18 - DK-5580 Nr. Aaby - Denmark - Phone: +45 70 202 303 - Fax: +45 70 202 404

VAT No. DK 31 89 48 32 - CVR No. 31 89 48 32 - E-Mail: phe@phe-nordic.com - www.phe-nordic.com

We are working for the following Industries:

The PHE Nordic Team is looking forward to serve you.

MarinePower plantsDairies / Cheese factoriesFood industriesSugar / Distilleries

BreweriesSanitary applicationsCosmeticsPharmaceuticalChemical industries