CPP20511 Certificate II in Fire Protection Inspection and Testing WORKPLACE PROJECT ASSESSMENT

Version: 2015.WP.1 Issued: 01/01/2015 1

PHASE 4: Task 1 – Inspect & Test Fire Hose Reels

Conduct a yearly inspection on a fire hose reel in the workplace in accordance with AS1851. Provide evidence of your work:

a. list the inspection tasks as per AS1851 on the table provided; and

b. provide a copy of the AS1851 maintenance log sheet; and

c. provide a photo of the fire hose reel that you have inspected.

This assessment task satisfies the knowledge and skills required to demonstrate competence in the following competency unit: CPPFES2010A Inspect & test fire hose reels This task may be completed in a simulated environment.

a. TASK SCHEDULE

Inspection Records Schedule- Hose Reel

Item Action required & pass fail requirement Six-

monthly Yearly

Pass/ Fail

Comments

Accessibility Check that the hose reel is readily accessible with no obstacles restricting its access P

Inspection Records Schedule- Hose Reel (cont)

Item Action required & pass fail requirement Six-

monthly Yearly

Pass/ Fail

Comments

CPP20511 Certificate II in Fire Protection Inspection and Testing WORKPLACE PROJECT ASSESSMENT

Version: 2015.WP.1 Issued: 01/01/2015 3

b. MAINTENANCE LOG SHEET

QBSA Lic NO.

DELTRA AUSTRALIA ABN:

JOB NO.

Record of Service – Hose Reel SITE NO.

SITE NAME:

Unit no.

Unit type INSTAL DATE

Make LENG-

TH Location of Equip LEVEL

SERVICE

PASS/ FAIL COMMENTS

1 FHR 1998 EXEL

FLOW RATE MOST DISADVANTAGE HOSE: SERVICE COMMENTS :

LITRES PER SECOND :

ANNUAL SITE SURVEY COMPLETED YES NO

ALL EQUIPMENT SERVICED TO AS 1851 REQUIREMENTS

DATE :

TECH NAME (Print):

TECH SIGNATURE:

CPP20511 Certificate II in Fire Protection Inspection and Testing WORKPLACE PROJECT ASSESSMENT

Version: 2015.WP.1 Issued: 01/01/2015 4

a. INSPECTION LIST

Inspection Records Schedule- Fire Hydrant

Item Action required & pass fail requirement Six-

monthly Yearly

Pass/ Fail

Comments

Water supply stop valves

Check all isolating valves including underground key-operated valves are in the correct operating position P

PHASE 4: Task 2 – Inspect & Test Fire Hydrants

Conduct a 6-monthly inspection of a pillar fire hydrant in the workplace in accordance with AS1851. Provide evidence of your work:

a. list the inspection tasks as per AS1851 on the table provided; and

b. provide a copy of the AS1851 maintenance log sheet; and

c. provide a photo of the fire hydrant that you have inspected.

This assessment task satisfies the knowledge and skills required to demonstrate competence in the following competency unit: CPPFES2037A Inspect & test fire hydrant systems This task may be completed in a simulated environment.

Inspection Records Schedule- Fire Hydrant (cont)

Item Action required & pass fail requirement Six-

monthly Yearly

Pass/ Fail

Comments

CPP20511 Certificate II in Fire Protection Inspection and Testing WORKPLACE PROJECT ASSESSMENT

Version: 2015.WP.1 Issued: 01/01/2015 6

b. MAINTENANCE LOG SHEET

QBSA Lic NO.

DELTRA AUSTRALIA ABN:

JOB NO.

Record of Inspection - Hydrant SITE NO.

SITE NAME:

Unit no. Unit type

Last P/T

Make Size Location of Equip LEVEL

SERVICE

PASS/ FAIL COMMENTS

1 HYD 2000 CSP 65MM MAIN GATE- ENTRY

ALL EQUIPMENT SERVICED TO AS1851 REQUIREMENTS

DATE :

TECH NAME (Print):

TECH SIGNATURE:

CPP20511 Certificate II in Fire Protection Inspection & Testing Monthly Activity Log & Summary

Task: You are required to complete a log of activities that you have completed this month relating to the CPP20511 course. A separate log must be kept for each month. Activities include:

Installing fire extinguishers and/or fire blankets*

Inspecting and testing fire extinguishers, fire blankets, fire hose reels, fire hydrants and/or emergency and exit lighting*

Preparing work method statements, work plans or schedules, risk assessments etc

Professional reading/further research on topics covered in the CPP20511 course All activities must be recorded on this template. Add additional log pages as required. You must also complete the monthly activity summary which is to be submitted with your activity log. The instructions for the summary are provided following the activity log. * Reminder: If you are doing this work in Queensland, you must be under personal supervision of an appropriately qualified person.

Student Name:

(Please print)

Student Signature:

Month of Activity:

To be completed by Assessor

Assessment: Activities Acceptable Activities Not Acceptable

Assessor Name:

(Please print)

Assessor Signature:

Date Activity Work Tasks Performed Supervised? Initials Yes No

Date Activity Work Tasks Performed Supervised? Initials Yes No

CPP20511 Monthly Summary

Task: You are required to select ONE activity that you have completed this month. This can be any activity from your workplace tasks or your monthly diary. Write a report on all aspects of that activity using the outline provided. Your report can be in dot-point format. Your summary may be hand-written on the template provided or completed in an electronic format using the headings provided and printed. Hand-Written Guidelines:

Hand-written summaries must be legible, or the assessment will be returned.

It is recommended that you print the pages single-sided. This will allow you to continue writing on the back of each page if you run out of space.

Add more pages if you require additional space, but make sure that you record the topic number and title on each additional page (eg. “1. Work Health and Safety”)

Workplace Assessment PHASE ________ of 6 (insert phase number)

Student Name:

Student Signature:

Activity Performed:

Date Activity Performed:

Location of Activity Performed:

Was the activity supervised? YES NO

Supervisor’s Name (if applicable):

Was the activity performed in the workplace, or was it simulated? Workplace Simulated

* Reminder: If you are doing this activity in Queensland, you must be under personal supervision of an appropriately qualified person.

1. Health & Safety Consider:

Risk assessment of work area

Hazards, risks, controls

Work method statements

Safety signs, site safety plans

Personal protective equipment

Communication and procedures for reporting OHS issues

Participation in OHS training

2. Manual Handling Consider:

Assessing hazards and risks of movement paths and safe working loads

Interpreting safety signs

Dangerous Goods requirements

Manual handling techniques

Preventing ODS & SGG emissions

3. Legislation & Standards Consider:

Building Code of Australia

Relevant Australian Standards

State/Territory legislation

Importance of applying legislative requirements

Implications of not applying legislative requirements

4. Organisational Requirements Consider:

Organisational policies and procedures Organisational documentation Communication and reporting

5. Client Service and Quality Consider:

Customer service

Problem-solving

Client confidentiality

Communication

Company client service standards, code of conduct, complaints handling procedures

Range of company products and services

The relevance of client service, good communication and your own role in delivering effective client service

Quality control methods, including completing documentation

6. Work Organisation Write a list of each step that you undertook to complete this activity. Include steps such as:

Receiving work order

Organising resources (equipment, products)

Scheduling time, making appointments, planning activity

Practical steps undertaken [eg. Selected correct hardware (screws, drill, extinguisher bracket), measured correct installation height, screwed extinguisher bracket to wall, checked height again… etc]