Pharmaceutical WastewaterTreatment System---Case Study

About Pharmaceutical Wastewater

There is a microbial fermentation process in the biopharmaceutical unit, producing large amount of organic components after the extraction of useful substances, this chemical residue contains certain acids, bases and organic agents. These materials eventually mix with the clean rinse water, eventually forming a difficult wastewater. Pharmaceutical products take only 5 percent to 15 percent of all feedstock, the remaining form the residual as wastewater or gas.

Practical Case Basic InfoProject name ： zero emission water reuse project of a pharmaceutical company in Inner MongoliaCapacity ： 6300m³/dFeed water type ： pharmaceutical wastewaterEffluent water quality ： water quality standard for urban miscellaneous water consumption （ GB18920-2002 ）

Feed water type capacity Feed water quality Effluent water quality

pharmaceutical wastewater/ water purification system brine/recycled water discharge/biochemical effluent

Feed water capacity: 6300 m3/d ， recovery rate ＞ 92%

Conductivity: 14000μs/cm Conductivity: 500μs/cm

TDS: 8000mg/L TDS: 300mg/LHardness （ CaCO3 ） :580mg/L

Hardness （ CaCO3 ） :200mg/L

Alkalinity:333mg/L Alkalinity: 150mg/LCOD: 260mg/L COD: 50mg/LChloride: 3200 mg/L Chloride: 100 mg/L

One-site Photos ShowIf any questions, please no hesitate to contact us.Visit our website: www.conhoo.com Email: info@conhoo.com

Contact infoWeb: www.conhoo.comEmail: info@conhoo.comTel: +86 20 3112 9583Fax: +86 20 3112 6793

Thank You