ph dg termi

8/4/2019 ph dg termi

1/14

First we termi parts, it goes well I tons since the drama (before I had tons also must not believe).

For the occasion I took a mold resin small parts that I had already prepared for another project.

There is in these parts of the leggings, briefs, and thighs, resculpte head. The idea of the project

is also, since the DG are sparsely decorated, to the "detailing" as they say in the classical model

i.e. detail parts as much as possible. So for this figurine I was directed at my usual for in the

brass tubes provide me dealer and plastic in all diameters in order to create pistons, viewfinders,

etc... Frankly to ex post is not so detailed as that but many will be with. The first thing to do was

to rebuild partially molded parts because they are still not of sufficient quality for a fig contest

parts (Oh yes it is for a genus Gratin Dauphinois competition if you know what I mean, if not I

understand me). Therefore adding white miliput, drying on the radiator and sanding appointment

to redraw a little the leggings and thighs I withdrew Central reinforcements to replace them with

pistons brass.

The bolter aussi has been somewhat reconstructed, probable a Land Raider bolter with replaced

Chargers. I sanded top (always to make possible the most exposed tip) and just added the viewfinder of

the bolter Commander Cullen (termi at ForgeWorld). Chargers come year Ork pool, I ' m not sure to

keep them and perhaps will replace them with bands of bolts.


2/14

Then I prepared the first jambire with rivets, these are actually inserted 1 mm diameter steel ball in 0.

95 mm drill hand-made holes. It is not too much glue to otherwise it overflows and it just ruins the

sharpness of the ball. Can also use beads of purification filter (as in the censers of the inquisition or the

popular water filters in our regions). Me I like the bling-bling so I put some steel balls.

Torso him is expanded as usual with the plastic card and the white miliput sanded to the 600 and 1000. I

covered the hatch on the roof of the armour for a little me away from the current design of termi armor.


3/14

Good happens incredibly when the establishment parts in order to obtain the desired installation. I find

it easiest to work with all the moving parts in order to play on multiple tables simultaneously. Once good

found laying, few glue just freeze and then a whole history of duro to joins balls of stiffening membersbetween them once and for all.

Side details and others; the right arm was cleaned of its original bolter and wrist 'broken' to engage

further sought dynamics. The elbow and shoulder joints are removed to the x-acto as not quite fine and

precise, especially when casting line in the Middle, so zou it turns everything to remake everything itself.

A genouillre was prepared on the right jambire, it's a little breaks large surface and it will put a

different color (surely of white) on the leg. The necklace in plastic card has been pasted and sanded to

arrive at the correct height so the eyes have a line of sight on the target referred (without it, made it a

little con anyway). The Imperial Eagle is cutting FW photo course.


4/14


5/14

The epaulette is made in plastic tubes of different diameters, I hesitate yet to put a small space between

the two layers, ca could add something more flexible. I will see it later when the second will be made.

The glove is a test, too I hesitate to keep a glove, if yes in what position (I don't like the position on the

photo). Or then glove poses on the thigh, or a weapon? I look carefully for trononneuse axe... The

bolter received a few details, brass square to hold ammunition bands and a so-called strip ammunition...

brief to see it all! Here again me micro; then I decided to remake the shoulder pads and as a result of

doing both simultaneously. The goal is to have a small space between the 2 plates. So I take the inner

tube and I glue two strips in plasticard which I just paste the outer tube. It's very complicated!

I myself am then launched also in the achievement of the Basic, is a bit trickier since the pose of the fig,must be that the feet touch the ground, walking has the good height, etc. First I did a miliput, cut and

polished to monitor stand GW plastic plate. Then a walk was made by miliput also, edge is in plastic card

(easiest to have a right thing), then I have factory with a basic plastic tube in which I have a hole, hollow

and covered all with the lead sheet. The goal here is to have a more realistic than if it was a plastic tube

"shredded" effect. I've pasted a photo cut floor and a shelf plastic. Some cracks on the part of the stand

"stone" that's it.


6/14


7/14


8/14


9/14


10/14

So it is time for painting course! First white sublayer GW in 2-3 steps, then a layer bleached

followed everywhere by znithal lighting white bomb Brown P3 + bone. End of September I

painted the head and the base and I then started to degrade the right jambire (without rivets) to

see what it was. The recipe is inspired by David DeathWing termi but with more than more than

black and white. Therefore the basic mixture is BB + P3 + one Brown little black.

Assombrissements with black and clarification with white, nothing very magical. At the

beginning I left the darkening area rather narrow and not very darkening precisely.


11/14

Then comes the winter, it's cold, I have something else to do in life and poum, early April I say to myself

that it is time to do a thing for the GD. Not too interested in doing the termi because I am more

convinced of hue, so I take on board a dio for the weekend "boostage pr-GD" pieces of painting with

the zozos. Barely on the spot, I am dismount in 20 pieces with a "you will never have the time, is not

finished, not own it, it's, it's, it's, it is, and also it, it's, it's, it and then it, must retake". In short I am

almost obliged fold me on the termi, one thing I had in my cash in addition to the dio. In 3 days I finished

one side of the torso, I put to see what it gives, the loincloth is first painted in red, but it will not at all, so

it is painted black and the BB clairci and green. I add small details like an eagle on the roof of the

armor. It is painted, and all things Golden, with the gold, shinning clarified the mithril, juice black chaos


12/14

+ leather brown for shading and then ink purple and green. All parchments and the axe handle receive a

layer of brown leather and the metal layer of mithril.

The stand is painted with a trick Foundation mixture which I can't remember the name, there are blue

gray, clarified with the bone bleached, everything I can remember. I continue with armor and the

shoulder pads, axe, and add a small Death Guard symbol of photodecoupe FW and a skull FW on small

ventral shield. A desire to last minute for a little break the large blank area.


13/14

I then wraps my stuff, make a break for 2 days and Thursday noon I arrive at Ploucland for 1 day and a

half of intensive painting with Vivien as partner of Office and David as a cleaner to eat, racing,... anyway

he abandoned a few days earlier and has it to do. The bolter black is a small free hand on the knee and

the loincloth, parchments also and I do another test with head based on and I start to tell me that it is

not badly eventually.


14/14

ph dg termi

Documents