8/7/2019 PGP-2010

1/8

acad;;; Program Parameters File For AutoCAD 2010; External Command and Command Alias Definitions

; Copyright (C) 1997-2009 by Autodesk, Inc. All Rights Reserved.

; Each time you open a new or existing drawing, AutoCAD searches; the support path and reads the first acad.pgp file that it finds.

; -- External Commands --; While AutoCAD is running, you can invoke other programs or utilities; such Windows system commands, utilities, and applications.; You define external commands by specifying a command name to be used; from the AutoCAD command prompt and an executable command string; that is passed to the operating system.

; -- Command Aliases --; The Command Aliases section of this file provides default settings for; AutoCAD command shortcuts. Note: It is not recommended that you directly; modify this section of the PGP file., as any changes you make to this section

of the; file will not migrate successfully if you upgrade your AutoCAD to a; newer version. Instead, make changes to the new; User Defined Command Aliases; section towards the end of this file.

; -- User Defined Command Aliases --; You can abbreviate frequently used AutoCAD commands by defining; aliases for them in the User Defined Command Aliases section of acad.pgp.; You can create a command alias for any AutoCAD command,; device driver command, or external command.

; Recommendation: back up this file before editing it. To ensure that; any changes you make to PGP settings can successfully be migrated; when you upgrade to the next version of AutoCAD, it is suggested that

; you make any changes to the default settings in the User Defined Command; Aliases section at the end of this file.

; External command format:; ,[],,[*],

; The bits of the bit flag have the following meanings:; Bit 1: if set, don't wait for the application to finish; Bit 2: if set, run the application minimized; Bit 4: if set, run the application "hidden"; Bit 8: if set, put the argument string in quotes;; Fill the "bit flag" field with the sum of the desired bits.; Bits 2 and 4 are mutually exclusive; if both are specified, only; the 2 bit is used. The most useful values are likely to be 0

; (start the application and wait for it to finish), 1 (start the; application and don't wait), 3 (minimize and don't wait), and 5; (hide and don't wait). Values of 2 and 4 should normally be avoided,; as they make AutoCAD unavailable until the application has completed.;; Bit 8 allows commands like DEL to work properly with filenames that; have spaces such as "long filename.dwg". Note that this will interfere; with passing space delimited lists of file names to these same commands.; If you prefer multiplefile support to using long file names, turn off; the "8" bit in those commands.

; Examples of external commands for command windows

DEL, DEL, 8,File to delete: ,DIR, DIR, 8,File specification: ,

SH, , 1,*OS Command: ,SHELL, , 1,*OS Command: ,

Pgina 1

8/7/2019 PGP-2010

2/8

acadSTART, START, 1,*Application to start: ,TYPE, TYPE, 8,File to list: ,

; Examples of external commands for Windows; See also the (STARTAPP) AutoLISP function for an alternative method.

EXPLORER, START EXPLORER, 1,,NOTEPAD, START NOTEPAD, 1,*File to edit: ,PBRUSH, START PBRUSH, 1,,

; Command alias format:; ,*

; The following are guidelines for creating new command aliases.; 1. An alias should reduce a command by at least two characters.; Commands with a control key equivalent, status bar button,; or function key do not require a command alias.; Examples: Control N, O, P, and S for New, Open, Print, Save.; 2. Try the first character of the command, then try the first two,; then the first three.

; 3. Once an alias is defined, add suffixes for related aliases:; Examples: R for Redraw, RA for Redrawall, L for Line, LT for; Linetype.; 4. Use a hyphen to differentiate between command line and dialog; box commands.; Example: B for Block, -B for -Block.;; Exceptions to the rules include AA for Area, T for Mtext, X for Explode.

; -- Sample aliases for AutoCAD commands --; These examples include most frequently used commands. NOTE: It isrecommended; that you not make any changes to this section of the PGP file to ensure the; proper migration of your customizations when you upgrade to the next versionof

; AutoCAD. The aliases listed in this section are repeated in the User Custom; Settings section at the end of this file, which can safely be edited while; ensuring your changes will successfully migrate.

3A, *3DARRAY3DMIRROR, *MIRROR3D3DNavigate,*3DWALK3DO, *3DORBIT3DP, *3DPRINT3DPLOT, *3DPRINT3DW, *3DWALK3F, *3DFACE3M, *3DMOVE

3P, *3DPOLY3R, *3DROTATE3S, *3DSCALEA, *ARCAC, *BACTIONADC, *ADCENTERAECTOACAD, *-ExportToAutoCADAA, *AREAAL, *ALIGN3AL, *3DALIGNAP, *APPLOADAPLAY, *ALLPLAYAR, *ARRAY-AR, *-ARRAYARR, *ACTRECORD

ARM, *ACTUSERMESSAGE-ARM, *-ACTUSERMESSAGE

Pgina 2

8/7/2019 PGP-2010

3/8

acadARU, *ACTUSERINPUTARS, *ACTSTOP-ARS, *-ACTSTOPATI, *ATTIPEDITATT, *ATTDEF-ATT, *-ATTDEF

ATE, *ATTEDIT-ATE, *-ATTEDITATTE, *-ATTEDITB, *BLOCK-B, *-BLOCKBC, *BCLOSEBE, *BEDITBH, *HATCHBO, *BOUNDARY-BO, *-BOUNDARYBR, *BREAKBS, *BSAVEBVS, *BVSTATEC, *CIRCLECAM, *CAMERA

CBAR, *CONSTRAINTBARCH, *PROPERTIES-CH, *CHANGECHA, *CHAMFERCHK, *CHECKSTANDARDSCLI, *COMMANDLINECOL, *COLORCOLOUR, *COLORCO, *COPYCP, *COPYCPARAM, *BCPARAMETERCREASE, *MESHCREASECSETTINGS, *CONSTRAINTSETTINGSCT, *CTABLESTYLECUBE, *NAVVCUBE

CYL, *CYLINDERD, *DIMSTYLEDAL, *DIMALIGNEDDAN, *DIMANGULARDAR, *DIMARCJOG, *DIMJOGGEDDBA, *DIMBASELINEDBC, *DBCONNECTDC, *ADCENTERDCE, *DIMCENTERDCENTER, *ADCENTERDCO, *DIMCONTINUEDCON, *DIMCONSTRAINTDDA, *DIMDISASSOCIATEDDI, *DIMDIAMETER

DED, *DIMEDITDELCON, *DELCONSTRAINTDI, *DISTDIV, *DIVIDEDJL, *DIMJOGLINEDJO, *DIMJOGGEDDL, *DATALINKDLI, *DIMLINEARDLU, *DATALINKUPDATEDO, *DONUTDOR, *DIMORDINATEDOV, *DIMOVERRIDEDR, *DRAWORDERDRA, *DIMRADIUSDRE, *DIMREASSOCIATE

DRM, *DRAWINGRECOVERYDS, *DSETTINGS

Pgina 3

8/7/2019 PGP-2010

4/8

acadDST, *DIMSTYLEDT, *TEXTDV, *DVIEWDX, *DATAEXTRACTIONE, *ERASEED, *DDEDIT

EL, *ELLIPSEER, *EXTERNALREFERENCESESHOT, *EDITSHOTEX, *EXTENDEXIT, *QUITEXP, *EXPORTEXT, *EXTRUDEF, *FILLETFI, *FILTERFREEPOINT, *POINTLIGHTFSHOT, *FLATSHOTG, *GROUP-G, *-GROUPGCON, *GEOMCONSTRAINTGD, *GRADIENT

GENERATESECTION, *SECTIONPLANETOBLOCKGEO, *GEOGRAPHICLOCATIONGR, *DDGRIPSH, *HATCH-H, *-HATCHHE, *HATCHEDITHI, *HIDEI, *INSERT-I, *-INSERTIAD, *IMAGEADJUSTIAT, *IMAGEATTACHICL, *IMAGECLIPIM, *IMAGE-IM, *-IMAGEIMP, *IMPORT

IN, *INTERSECTINF, *INTERFEREIO, *INSERTOBJQVD, *QVDRAWINGQVDC, *QVDRAWINGCLOSEQVL, *QVLAYOUTQVLC, *QVLAYOUTCLOSEJ, *JOINJOGSECTION, *SECTIONPLANEJOGL, *LINELA, *LAYER-LA, *-LAYERLAS, *LAYERSTATELE, *QLEADERLEN, *LENGTHEN

LESS, *MESHSMOOTHLESSLI, *LISTLINEWEIGHT, *LWEIGHTLMAN, *LAYERSTATELO, *-LAYOUTLS, *LISTLT, *LINETYPE-LT, *-LINETYPELTYPE, *LINETYPE-LTYPE, *-LINETYPELTS, *LTSCALELW, *LWEIGHTM, *MOVEMA, *MATCHPROPMAT, *MATERIALS

ME, *MEASUREMEA, *MEASUREGEOM

Pgina 4

8/7/2019 PGP-2010

5/8

acadMI, *MIRRORML, *MLINEMLA, *MLEADERALIGNMLC, *MLEADERCOLLECTMLD, *MLEADERMLE, *MLEADEREDIT

MLS, *MLEADERSTYLEMO, *PROPERTIESMORE, *MESHSMOOTHMOREMOTION, *NAVSMOTIONMOTIONCLS, *NAVSMOTIONCLOSEMS, *MSPACEMSM, *MARKUPMT, *MTEXTMV, *MVIEWNORTH, *GEOGRAPHICLOCATIONNORTHDIR, *GEOGRAPHICLOCATIONNSHOT, *NEWSHOTNVIEW, *NEWVIEWO, *OFFSETOP, *OPTIONS

ORBIT, *3DORBITOS, *OSNAP-OS, *-OSNAPP, *PAN-P, *-PANPA, *PASTESPECRAPIDPROTOTYPE, *3DPRINTPAR, *PARAMETERS-PAR, *-PARAMETERSPARAM, *BPARAMETERPARTIALOPEN, *-PARTIALOPENPE, *PEDITPL, *PLINEPO, *POINTPOFF, *HIDEPALETTES

POL, *POLYGONPON, *SHOWPALETTESPR, *PROPERTIESPRCLOSE, *PROPERTIESCLOSEPROPS, *PROPERTIESPRE, *PREVIEWPRINT, *PLOTPS, *PSPACEPSOLID, *POLYSOLIDPTW, *PUBLISHTOWEBPU, *PURGE-PU, *-PURGEPYR, *PYRAMIDQC, *QUICKCALCQCUI, *QUICKCUI

R, *REDRAWRA, *REDRAWALLRC, *RENDERCROPRE, *REGENREA, *REGENALLREC, *RECTANGREFINE, *MESHREFINEREG, *REGIONREN, *RENAME-REN, *-RENAMEREV, *REVOLVERO, *ROTATERP, *RENDERPRESETSRPR, *RPREFRR, *RENDER

RW, *RENDERWINS, *STRETCH

Pgina 5

8/7/2019 PGP-2010

6/8

acadSC, *SCALESCR, *SCRIPTSE, *DSETTINGSSEC, *SECTIONSET, *SETVARSHA, *SHADEMODE

SL, *SLICESMOOTH, *MESHSMOOTHSN, *SNAPSO, *SOLIDSP, *SPELLSPL, *SPLINESPLANE, *SECTIONPLANESPLAY, *SEQUENCEPLAYSPLIT, *MESHSPLITSPE, *SPLINEDITSSM, *SHEETSETST, *STYLESTA, *STANDARDSSU, *SUBTRACTT, *MTEXT

-T, *-MTEXTTA, *TABLETTB, *TABLETEDIT, *TEXTEDITTH, *THICKNESSTI, *TILEMODETO, *TOOLBARTOL, *TOLERANCETOR, *TORUSTP, *TOOLPALETTESTR, *TRIMTS, *TABLESTYLEUC, *UCSMANUN, *UNITS-UN, *-UNITS

UNCREASE, *MESHUNCREASEUNI, *UNIONV, *VIEWVGO, *VIEWGOVPLAY, *VIEWPLAY-V, *-VIEWVP, *DDVPOINT-VP, *VPOINTVS, *VSCURRENTVSM, *VISUALSTYLES-VSM, *-VISUALSTYLESW, *WBLOCK-W, *-WBLOCKWE, *WEDGEWHEEL, *NAVSWHEEL

X, *EXPLODEXA, *XATTACHXB, *XBIND-XB, *-XBINDXC, *XCLIPXL, *XLINEXR, *XREF-XR, *-XREFZ, *ZOOM

; The following are alternative aliases and aliases as supplied; in AutoCAD Release 13.

AV, *DSVIEWERCP, *COPY

DIMALI, *DIMALIGNEDDIMANG, *DIMANGULAR

Pgina 6

8/7/2019 PGP-2010

7/8

acadDIMBASE, *DIMBASELINEDIMCONT, *DIMCONTINUEDIMDIA, *DIMDIAMETERDIMED, *DIMEDITDIMTED, *DIMTEDITDIMLIN, *DIMLINEAR

DIMORD, *DIMORDINATEDIMRAD, *DIMRADIUSDIMSTY, *DIMSTYLEDIMOVER, *DIMOVERRIDELEAD, *LEADERTM, *TILEMODE

; Aliases for Hyperlink/URL Release 14 compatibilitySAVEURL, *SAVEOPENURL, *OPENINSERTURL, *INSERT

; Aliases for commands discontinued in AutoCAD 2000:AAD, *DBCONNECTAEX, *DBCONNECT

ALI, *DBCONNECTASQ, *DBCONNECTARO, *DBCONNECTASE, *DBCONNECTDDATTDEF, *ATTDEFDDATTEXT, *ATTEXTDDCHPROP, *PROPERTIESDDCOLOR, *COLORDDLMODES, *LAYERDDLTYPE, *LINETYPEDDMODIFY, *PROPERTIESDDOSNAP, *OSNAPDDUCS, *UCS

; Aliases for commands discontinued in AutoCAD 2004:

ACADBLOCKDIALOG, *BLOCKACADWBLOCKDIALOG, *WBLOCKADCENTER, *ADCENTERBMAKE, *BLOCKBMOD, *BLOCKBPOLY, *BOUNDARYCONTENT, *ADCENTERDDATTE, *ATTEDITDDIM, *DIMSTYLEDDINSERT, *INSERTDDPLOTSTAMP, *PLOTSTAMPDDRMODES, *DSETTINGSDDSTYLE, *STYLEDDUCS, *UCSMANDDUCSP, *UCSMAN

DDUNITS, *UNITSDDVIEW, *VIEWDIMHORIZONTAL, *DIMLINEARDIMROTATED, *DIMLINEARDIMVERTICAL, *DIMLINEARDOUGHNUT, *DONUTDTEXT, *TEXTDWFOUT, *PLOTDXFIN, *OPENDXFOUT, *SAVEASPAINTER, *MATCHPROPPREFERENCES, *OPTIONSRECTANGLE, *RECTANGSHADE, *SHADEMODEVIEWPORTS, *VPORTS

EDWFX, *EXPORTDWFXEDWF, *EXPORTDWF

Pgina 7

8/7/2019 PGP-2010

8/8

acadEPDF, *EXPORTPDF-QPUB, *-EXPORT; Aliases for commands discontinued in AutoCAD 2007:RMAT, *MATERIALSFOG, *RENDERENVIRONMENTFINISH, *MATERIALS

SETUV, *MATERIALMAPSHOWMAT, *LISTRFILEOPT, *RENDERPRESETSRENDSCR, *RENDERWIN

; Aliases for commands discontinued in AutoCAD 2009:DASHBOARD, *RIBBONDASHBOARDCLOSE, *RIBBONCLOSE

; -- User Defined Command Aliases --; Make any changes or additions to the default AutoCAD command aliases in; this section to ensure successful migration of these settings when you; upgrade to the next version of AutoCAD. If a command alias appears more; than once in this file, items in the User Defined Command Alias take; precedence over duplicates that appear earlier in the file.

; **********----------********** ; No xlate ; DO NOT REMOVE

C, *COPYCC, *CIRCLERT, *ROTATECH, *CHAMFER

LM, *LMANLMM, *LAYMCHLC, *LAYCURLII, *LAYISOLCC, *COPYTOLAYERLW, *LAYWALKLN, *LAYON

LO, *LAYOFFLF, *LAYFRZLUF, *LAYTHWLK, *LAYLCKLUK, *LAYULKLMG, *LAYMRGLD, *LAYDEL

Pgina 8