petroleum testers...viscometer type modified ubbelohde viscometer(ui-b type) required sample amount...

Due to RIGOSHAs' product improvement, specifications subject to change without notice.

Saitama Sales & Technical CenterAdress: 3-14-20 Harayama Midori-ku Saitama-shi Saitama-ken 336-0931 JapanPhone: +81-48-882-3086 Facsimile: +81-48-811-1202Email: [email protected]

Distributors

PETROLEUM TESTERSDIGEST CATALOG

RIGOSHA & Co., Ltd.

RIGO2008_en.indd 1 2009/08/10 12:01:42

RIGO’ s software for measuring viscosity has been born from rich experience beyond 40 years. The

measurement system built based on MS – Excel is designed to minimize the effects of OS renewal, and the

“User-Friendly” system has also various options, such as Sample Feeder Addition and Weighting Data

Import Function.

In fine-tuning mode, Temperature Indicator registers

digitally the value of a thermometer reading, so a

consistency with the thermometer and a traceability of

the value are secured.

Additional installation of auto-changer, such as Sample

Feeder and Turntable is available to RIGO’ s Automatic

Viscometer as an option.

Interrupt measurement for urgent sample is possible

even in the course of a test, and processing program as

well as the number of continuous processing are able to

modify to user's needs.

A XYZ tri-axis robot in the unit pre-treats the sample

with batch operation. That is, the unit takes sample and

solvent to form a solution of a specified density, and

agitates the solution in dissolution bath.

Then the system processes in order the next steps of

measurement in conjunction with Automatic Viscometer

VMR or VMC.

A light guide made of glass fiber, which is adopted for

meniscus detection of viscometer, is little influenced by

any type of heat medium and temperature.

PID control method based on CPU Calculation, which

has been originally designed by RIGO, offers the stability

as within ±0.01˚C(under 100˚C) or ±0.03˚C(100~180˚C).

Selectable from various Calculation Formulae for the

followings.

• Kinematic viscosity (mm2/sec)

• Viscosity (mPa • s)

• Relative viscosity ( rel)

• Specific viscosity ( sp)

• Inherent viscosity ( inh)• Viscosity Number (VN)

• Intrinsic viscosity (by Schulz formula)

• Intrinsic viscosity (by Huggins formula)

• Intrinsic viscosity (polyvinyl chloride)

• Intrinsic viscosity (by Billmyer formula)

• Intrinsic viscosity number (ml/g)

• Viscosity mean molecular weight (by W. KuHu formula)

• Corrected specific viscosity

• Mean polymerization degree (polyvinyl chloride)

PETROLEUM TESTERS1

RIGO2008_en.indd 2 2009/08/10 12:01:50

RIGO’ s software for measuring viscosity has been born from rich experience beyond 40 years. The

measurement system built based on MS – Excel is designed to minimize the effects of OS renewal, and the

“User-Friendly” system has also various options, such as Sample Feeder Addition and Weighting Data

Import Function.

In fine-tuning mode, Temperature Indicator registers

digitally the value of a thermometer reading, so a

consistency with the thermometer and a traceability of

the value are secured.

Additional installation of auto-changer, such as Sample

Feeder and Turntable is available to RIGO’ s Automatic

Viscometer as an option.

Interrupt measurement for urgent sample is possible

even in the course of a test, and processing program as

well as the number of continuous processing are able to

modify to user's needs.

A XYZ tri-axis robot in the unit pre-treats the sample

with batch operation. That is, the unit takes sample and

solvent to form a solution of a specified density, and

agitates the solution in dissolution bath.

Then the system processes in order the next steps of

measurement in conjunction with Automatic Viscometer

VMR or VMC.

A light guide made of glass fiber, which is adopted for

meniscus detection of viscometer, is little influenced by

any type of heat medium and temperature.

PID control method based on CPU Calculation, which

has been originally designed by RIGO, offers the stability

as within ±0.01˚C(under 100˚C) or ±0.03˚C(100~180˚C).

Selectable from various Calculation Formulae for the

followings.

• Kinematic viscosity (mm2/sec)

• Viscosity (mPa • s)

• Relative viscosity ( rel)

• Specific viscosity ( sp)

• Inherent viscosity ( inh)• Viscosity Number (VN)

• Intrinsic viscosity (by Schulz formula)

• Intrinsic viscosity (by Huggins formula)

• Intrinsic viscosity (polyvinyl chloride)

• Intrinsic viscosity (by Billmyer formula)

• Intrinsic viscosity number (ml/g)

• Viscosity mean molecular weight (by W. KuHu formula)

• Corrected specific viscosity

• Mean polymerization degree (polyvinyl chloride)

PETROLEUM TESTERS

Full Automatic Viscometer System, 2 units (Desktop Type)

Cat.No. VMR-022UPC (for Medium Temp.) / VMR-023UPC (for High Temp.)

This, the original type of VMR Series, is a full-automatic viscometer system destined for determination of the Relative Viscosity, Viscosity Number, Intrinsic Viscosity, and Viscosity Mean Molecular Weight of polymer products. What is to do for the measurement is just to set sample container. Then, sampling, maintenance of the sample at a predetermined temperature and a measurement are done repeatedly at a designated number of times (1 to 4 at maximum). After completion of the process of measurement, the viscometer is cleaned by washing with a solvent, and dried with a purge of gas. By this cleaning procedure, the sample container(s) is also cleaned almost completely. Namely, this apparatus can be used to complete a series of operations of viscosity measurement in a generally full-automatic manner.

Related Standard

JIS K2283(Kinematic Viscosity)JIS K7367(Viscosity Number and Intrinsic viscosity of polymer.)JIS K6933(Viscosity Number of Plastics -Polyamides)

Operating Temp.

20~100°C/VMR-022UPC100~180°C/VMR-023UPC

Temp. Control Accuracy

Within ±0.01°C(Under 100°C) Within ±0.03°C(Over 100°C)

Viscometer Type Modified Ubbelohde viscometer(UI-b type)

Required sample amount

30~50mL

Measuring Range

0.3~2,500mm2/s

Measuring Accuracy

Within 0.02 sec in difference between two measurements of pure solvent

Washing Solvent washing

Full Automatic Viscometer System, 5 units (Standard Type)

Cat.No. VMR-052UPC (for Medium Temp.) / VMR-053UPC (for High Temp.)

This, the standard type of VMR Series, is a full -automatic viscometer system destined for determination of not only the kinematic viscosity of liquid, but also the Relative Viscosity, Viscosity Number, Intrinsic Viscosity, and Viscosity Mean Molecular Weight of polymer products. Sample feeder addition and weighting data import function are able to order optionally.

Related Standard


Operating Temp.

20~100°C / VMR-052UPC100~180°C / VMR-053UPC


Within ±0.01°C (Under 100°C)Within ±0.03°C (Over 100°C)

Viscometer Type Modified Ubbelohde viscometer(UIS type)


10~50mL

Measuring Range

0.3~2,500mm2/s

Measuring Accuracy



Full Automatic Viscometer System (2 units for Medium Temp. with turntable)

Cat.No. VMR-022UPC•F06 (6 consecutive tests) ~ F10 (10 consecutive tests)

This, equipped with turntable, is a full -automatic viscometer system destined for determination of the Relative Viscosity, Viscosity Number, Intrinsic Viscosity, and Viscosity Mean Molecular Weight of polymer products. What is to do for the measurement is just to set sample container on table, then, each viscometers measure up to 10 times consecutively (20 times totally). Interrupt measurement of urgent sample is also possible even in the course of test.

Related Standard


Operating Temp. 20~100°CTemp. Control Accuracy

Within ±0.01°C



10~50mL

Measuring Range

0.3~2,500mm2/s

Measuring Accuracy


Washing Solvent washingPhoto: VMR–022·F06

Full Automatic Viscometer System, (2 Units · 5 Units for Medium Temp. Pressurization Sampling Type)

Cat.No. VMR-022USPC (2 Units) / VMR-052USPC (5 Units)

This, the Pressurization Sampling Type of VMR Series, is a full -automatic viscometer system destined for determination of Viscosity Number and Intrinsic Viscosity of highly -volatile polymer products, such as polycarbonate. The pressurization sampling makes sample difficult to volatilize, and makes it possible that the solvent is maintained at a constant density level.

Related Standard

JIS K7367 / ISO 1628 (Viscosity Number and Intrinsic viscosity )

Operating Temp.

20~40°C


within ±0.01°C



30~50mL

Measuring Range

0.3~2,500mm2/s (Vary according to purpose and type.)

Measuring Accuracy


Washing Solvent washingPhoto: VMR–052USPC

2

RIGO2008_en.indd 3 2009/08/10 12:02:11

PETROLEUM TESTERS

Full Automatic Viscometer System, (2 Units ·5 Units for Medium Temp. “Rinse by Sample” Type)

Cat.No. VMS-022UPC (2 Units) / VMS-052UPC (5 Units)

This, the Standard Type of VMS Series, is a full-automatic viscometer system destined for determination of Viscosity Number and Intrinsic Viscosity of polymer products which phenol series and sulfuric acid are used as a diluting solvent. The viscometers are cleaned, before starting measurement, by repeating twice suction and emission of a sample to be measured. We call the process “Rinse by Sample”, and it is much safer than washing with a solvent.

Related Standard



Within ±0.01°C



30~50mL

Measuring Range

0.3~2,500mm2/s

Measuring Accuracy


Washing By Rinse by Sample

Full Automatic Viscometer System, (5 Units for Medium Temp. with Auto-Changer for consecutive tests, and consecutive dilution)

Cat.No. VMR-052UDPC·F06 (with auto-changer for 6 consecutive tests)

Up to 30 samples can be measured by using auto -changer for 6 consecutive tests. After measurement of the first solution, a dispensing pipette dilutes the density of solution, and then the system starts the next measurement after the process of Rinse by sample. Repeating the above process, a same solution is measured while diluting in order. Based on the graph on which the results of each densities are plotted, the value of [η] can be obtained by extrapolation method. After completion of the process of measurement, the viscometer is cleaned by washing with a solvent, and dried with a purge of gas.

Related Standard

JIS K7367(Viscosity Number and Intrinsic viscosity of polymer.)


within ±0.01°C



50mL

Measuring Range

0.3~2,500mm2/s

Measuring Accuracy



Full Automatic Viscometer System, (2 Units for Medium Temp. with turntable)

Cat.No. VMX-022APC·F06 (for high viscosity) / VMX-022RPC·F06 (for opaque liquid)

VMX series are a full automatic viscosity system designed for a special sample. APC is designed for measuring a transparent liquid with high viscosity, and RPC is designed for measuring opaque liquid, such as heavy oil and tar, with various viscosities. What is to do for the measurement is just to set sample container on table, then, each viscometers measure up to 10 times consecutively (20 times totally). Interrupt measurement of urgent sample is also possible even in the course of test.

Related Standard

JIS K2283 / ASTM D445·D446


within ±0.01°C

Viscometer Type Modified Atlantic Type Viscometer(for APC)Modified Lanz-Zeitfuchs Type Viscometer (for RPC)


30~80mL

Measuring Range

1~5,000mm2/s

Measuring Accuracy

The differences between two measurements are less than 1% of the mean.


Full Automatic Viscometer System, (5 Units for Medium Temp. with Auto Changer)

Cat.No. VMR-052UPC·F06~F10 (with auto-changer for 6~10 consecutive tests) / VMS-052UPC·F06 (with auto-changer for 6 consecutive tests, and “Rinse by Sample” Type)

These, based on VMR and VMS series, are Full Automatic Viscometer Systems having auto -changer for multi -consecutive tests. The VMR series, after the end of measurement, move into the next measurement while washing, but the VMS series conduct Rinse by Sample before starting measurement. Interrupt measurement of urgent sample is also possible even in the course of test. It is possible to design the sample processing No. and measurement program according to user's require.

Related Standard



within ±0.01°C



10~50mL(VMR Series)30~50mL(VMS Series)

Measuring Range

0.3~2,500mm2/s

Measuring Accuracy


Photo: VMR–052UPC·F10

Photo: VMS–052UPC

3

RIGO2008_en.indd 4 2009/08/10 12:02:26

PETROLEUM TESTERS

Automatic Viscometer System, 2 Units (with holder)

Cat.No. VMC-222 (for Medium Temp.) / VMC-223 (for High Temp.)

This, 2 unit type of very popular VMC Series, is equipped with cassette type viscometer holder that viscometers can be changed just in one - touch. What is only to do for the measurement is to input viscometer ID number which has been registered, then, the data is automatically calculated to Kinematic viscosity (mm2/sec) or Relative Viscosity (ηrel) and printed out. Up to 200 viscometers can be registered in advance.

Related Standard

JIS K2283 / ASTM D445·D446 (Kinematic viscosity)JIS K7367, etc. (Viscosity Number, Intrinsic viscosity)

Operating Temp.

15~100°C/VMC-222100~180°C/VMC-223



Viscometer Type

Cannon-Fenske type, Cannon-Fenske Reverse flow type, Ubbelohde type.

Measuring Range

0.3~20,000mm2/s

Measuring Accuracy


Sampling Suction type (changeable to Pressurization Sampling Type)

Option VMC-Type Viscometers

Automatic Viscometer System, 5 Units (with holder)

Cat.No. VMC-352 (for Medium Temp.) / VMC-353 (for High Temp.)

This, the standard type of very popular VMC Series, is equipped with cassette type viscometer holder that viscometers can be changed just in one- touch. What is only to do for the measurement is to input viscometer ID number which has been registered, then, the data is automatically calculated to Kinematic viscosity (mm2/sec) or Relative Viscosity (ηrel) and printed out. Up to 200 viscometers can be registered in advance.

Related Standard

JIS K2283 / ASTM D445·D446 (Kinematic viscosity)JIS K7367, etc. (Viscosity Number, Intrinsic viscosity)

Operating Temp.

15~100°C/VMC–352100~180°C/VMC–353



Viscometer Type

Cannon-Fenske type, Cannon-Fenske Reverse flow type, Ubbelohde type.

Measuring Range

0.3~20,000mm2/s

Measuring Accuracy


Sampling Suction type (changeable to Pressurization Sampling Type)

Option VMC-Type Viscometers

Ubbelohde type Cat.No. 410−UA

Series No.

Approx. Constantmm2/s2

Minimum flow time

SEC

Kinematic Viscosity range

mm2/s cSt

0 0.001 300 0.3 ~ 10C 0.003 200 0.6 ~ 30B 0.005 200 1 ~ 51 0.01 200 2 ~ 101C 0.03 200 6 ~ 301B 0.05 200 10 ~ 502 0.1 200 20 ~ 1002C 0.3 200 60 ~ 3002B 0.5 200 100 ~ 5003 1.0 200 200 ~ 10003C 3.0 200 600 ~ 30003B 5.0 200 1000 ~ 50004 10 200 2000 ~ 10000

Cannon·Fenske type Cat.No. 410−CA

Series No.


Minimum flow time

SEC


mm2/s cSt

25 0.002 250 0.5 ~ 2 50 0.004 200 0.8 ~ 4 75 0.008 200 1.6 ~ 8100 0.015 200 3 ~ 15150 0.035 200 7 ~ 35200 0.1 200 20 ~ 100300 0.25 200 50 ~ 250350 0.5 200 100 ~ 500400 1.2 200 240 ~ 1200450 2.5 200 500 ~ 2500500 8 200 1600 ~ 8000

Cannon·Fenske Reverse flow type Cat.No. 410−CRA

Series No.


Minimum flow time

SEC


mm2/s cSt

25 0.002 200 0.4 ~ 2 50 0.004 200 0.8 ~ 4 75 0.008 200 1.6 ~ 8100 0.015 200 3 ~ 15150 0.035 200 7 ~ 35200 0.1 200 20 ~ 100300 0.25 200 50 ~ 250350 0.5 200 100 ~ 500400 1.2 200 240 ~ 1200450 2.5 200 500 ~ 2500500 8 200 1600 ~ 8000600 20 200 4000 ~ 20000

VMC-Type Viscometer

Cat.No. 410-UA (Ubbelohde type) / 410-CA (Cannon·Fenske type) / 410-CRA (Cannon·Fenske Reverse flow type)

These Viscometers have been developed as a glass capillary especially for VMC Automatic Viscometer Systems so that it can be smoothly set to the special cassette holder.

Related Standard

JIS K2283/ASTM D445·D446 (Kinematic Viscosity)JIS K7367· ISO 1628 (Viscosity Number, Instrinsic Viscosity)

VMCイメージ

4

RIGO2008_en.indd 5 2009/08/10 12:02:37

PETROLEUM TESTERS

Kinematic Viscosity Bath, 6 units.

Cat.No. 403-162

This, a succession model of 403-062, is a precision temperature bath manufactured in conformity to JIS K2283, ASTM D445·D446 and ISO 3104 ·3105, and designed by considering miniaturization, thrifty power consumption and safety improvement. The PID temperature control method adopted enables temperature accuracy to be kept within ±0.01°C of preset temperature.

Related Standard

JIS K2283 / ASTM D445·446 (Kinematic Viscometer)JIS K7367 / ISO 1628 (Viscosity Number, Intrinsic viscosity)

No. of Units 6 units Operating Temp.

30~100°C (30, 40, 50, 75 & 100°C/Standards – Selectable with rotary switch.)


Within ±0.01°C

Heater 1500WAgitator Propeller Agitator with Speed adjustor.Illumination Fluorescent LampBath Heat Proof Glass, about 17L.

Kinematic Viscosity Bath, 6 units. (With Digital Stop-watch)

Cat.No. 403DS-162

This, a succession model of 403-062, is a precision temperature bath manufactured in conformity to JIS K2283, ASTM D445·D446 and ISO 3104 ·3105, and designed by considering miniaturization, thrifty power consumption and safety improvement. The internal six stop-watches are able to measure six Viscometers or three Reverse Flow Viscometers at a time by switching its mode into 1TB or 2TB.

Related Standard


No. of Units 6 units Operating Temp.

30~100°C (30, 40, 50, 75 & 100°C / Standards)


Within ±0.01°C

Stop-watch 6 internal Stop-watches.Stop-Watch Indication

Green LED, 0~999.9 sec. (Crystal Oscillation Type)

Heater 1500WIllumination Fluorescent LampBath Heat Proof Glass, about 17L.

Brookfield Digital Viscometer (Manufacturer : Brookfield Engineering Laboratories, Inc. in USA.)

Model DV- I+/DV- II+PRO

The DV- II+ PRO Digital Viscometer combines traditional Brookfield accuracy, reliability and versatility with the advantages of continuous sensing, temperature measurement and data output to PC or printer. When controlled by PC, the DV- II+ PRO becomes a Rheometer with variable speed capability from 0.01 to 200 rpm. This instrument is the preferred choice for many Brookfield customers.• Connection to PC with optional software • Compatible with all Brookfield accessories• Auto -zero function & Auto - range function • Warns of under- or over- range torque measurement conditions

Main Specification (DV-II+Pro)

Temperature °C or °FViscosity cP or mPa·sAccuracy 1% of full scale range% Torque Brookfield value

Shear Rate sec- 1※

Shear Stress N/m2 or Dynes/cm2※

Revolution rpmSpindle Spindle No. Indication

※ In the case of coaxial cylinder geometry accessories and Cone Plate Type.

Digital Stop-watch (for Kinematic Viscosity Measurement)

Cat.No. WDS-102-1~WDS-102-3

This, a Digital Stop -watch for Kinematic Viscosity Measurement only, is used for measuring Kinematic Viscosity, Viscosity Number and Intrinsic Viscosity of polymer products. For example, WDS-102 -3 is able to measure six Viscometers or three Reverse Flow Viscometers at a time by switching its mode into 1TB or 2TB.

Related Standard


Counting Range

0~999.9 sec.

Indication Green LED, Digital Indication.Accuracy Within +0.01%Basic Signal Crystal Oscillation TypePower Supply AC100V 50/60Hz

Photo: WDS–102–2

5

RIGO2008_en.indd 6 2009/08/21 13:52:11

PETROLEUM TESTERS

Standard Liquids for Calibrating Viscometers (Manufacturer : Nippon Grease Co., Ltd. In Japan.)

Cat.No. 440-JVS

These standard liquids not only ensures traceability required by Japanese national standards, but also are considered to ensure quasi - traceability as an International Measurement Reference Material because they, under the control of National Institute of Advanced Industrial Science and Technology (AIST) in Japan, have been registered to The International Database for Certified Reference Material (COMAR) to which ISO/REMCO is supporting.

Related Standards

JIS K2283·Z8809 Quantity 500ml

Standard Liquids for Calibrating Viscometers (Manufacturer : Nippon Grease Co., Ltd. In Japan.) Cat.No. 440−JVS

Approx. Kinematic Viscosity mm2/s cSt

Viscosity Standard

20°C 25°C 30°C 40°C

JS 2.5 2.5 – 2.1 1.8 JS 5 5 – 3.9 3.2 JS 10 10 – 7.4 5.7 JS 20 20 – 14 10 JS 50 50 – 32 21 JS 100 100 – 59 38 JS 200 200 – 110 66 JS 500 500 – 260 150 JS 1000 1000 – 500 270 JS 2000 2000 – 940 480 JS 14000 14000 – 5500 2400 JS 52000 52000 – 20000 8500 JS 160000 160000 100000 – –

Approx. Dynamic Viscosity mPa·s cP

Viscosity Standard

20°C 25°C 30°C 40°C

JS 2.5 2.0 – 1.6 1.4 JS 5 4.1 – 3.2 2.5 JS 10 8.4 – 6.1 4.6 JS 20 17 – 11 8.2 JS 50 43 – 27 18 JS 100 86 – 51 32 JS 200 170 – 95 56 JS 500 440 – 230 130 JS 1000 890 – 430 230 JS 2000 1800 – 820 420 JS 14000 12000 – 4800 2100 JS 52000 46000 – 18000 7500 JS 160000 140000 90000 – –

CANNON Viscosity Standards (Manufacturer : Cannon Instrument Company Inc. in USA)

Cat.No. 440- IVS

Viscosities for all standards sold by CANNON are based on the National Institute of Standards and Technology (NIST) value of 1.0016 mPa·s (centipoise) for water at 20°C (68°F). All CANNON viscosity standards meet the precision specifications of ASTM D 445/446 and ISO 3104/3105, and are traceable to the NIST (National Institute of Standards and Technology).

Related Standards

JIS K2283 / ASTM D445·446 / ISO 3104 ·3105

Quantity 470ml

CANNON Viscosity Standards (Manufacturer : Cannon Instrument Company Inc. in USA) Cat.No. 440−IVS

Approx. Kinematic Viscosity mm2/s cSt

Viscosity Standard

20°C 25°C 40°C 100°C

N2 2.9 2.6 2.0 0.93S3 4.6 4.0 2.9 1.2N4 6.7 5.8 4.0 1.5S6 11 8.9 5.7 1.8N7.5 14 12 7.5 2.3N10 21 17 10 2.4N14 30 25 14 3.4S20 44 34 18 3.8N26 57 46 25 5.2N35 87 66 32 5.3N44 110 86 44 7.5S60 160 120 54 7.5N75 200 150 75 12N100 330 230 97 11N140 400 300 140 18S200 550 400 180 20N250 770 570 250 29N350 1000 720 310 32N415 1400 990 420 41S600 1700 1300 520 50N750 2600 1900 750 66N1000 3400 2400 940 80N1400 5100 3600 1400 120S2000 8300 5300 1600 72N2500 8400 6000 2500 230N4000 20000 12000 3400 120N5100 28000 18000 5100 170S8000 41000 25000 6700 215N10200 58000 36000 10200 300N15000 77000 47000 13000 360N18000 103000 64000 18000 500S30000 – 79000 22000 630

Approx. Dynamic Viscosity mPa·s cP

Viscosity Standard

20°C 25°C 40°C 100°C

N2 2.2 2.0 1.5 0.65S3 3.9 3.3 2.4 0.90N4 5.2 4.5 3.1 1.1S6 10 8.0 5.0 1.5N7.5 11 9.5 5.9 1.7N10 21 16 8.8 2.0N14 24 20 11 2.6S20 37 29 15 3.0N26 47 37 20 4.0N35 75 56 27 4.4N44 92 71 36 5.9S60 141 104 47 6.2N75 160 125 61 9.2N100 283 202 84 9.2N140 340 250 120 14S200 460 330 145 14N250 650 480 210 23N350 830 600 250 24N415 1200 830 350 33S600 1500 1100 440 40N750 2200 1600 620 53N1000 2900 2000 800 65N1400 4300 3000 1200 92S2000 7300 4700 1400 59N2500 7100 5100 2100 180N4000 17000 11000 2900 100N5100 25000 16000 4500 140S8000 33000 20000 5900 200N10200 52000 32000 9000 250N15000 68000 41000 11000 320N18000 92000 57000 16000 420S30000 – 71000 20000 540

6

RIGO2008_en.indd 7 2009/08/21 13:52:17

PETROLEUM TESTERS

Automatic Flash Point Tester (Tag Closed Cup)

Cat.No. RFT-301

This is used for measuring a Flash Point below 93°C on such samples as industrial gasoline, heating oil, and chemical products. Low-Temp. Type is used for measuring highly -volatile materials like gasoline.

Related Standard

JIS K2265-1 / ASTM D56

Measuring Range

10 ~ 93°C / -20 ~ 93°C (Low-Temp. Type)

Temp. Rising 1°C/min. and 3°C/min.Temp. Detection Platinum resistance thermometer (Pt 100Ω)

Flash Point Detection

Temp. differentiation by thermocouple

System Control Digital control by 16 bit CPUDisplay TFT Color Graphic Display, 5.7 inch, 256 colors,

320 x 240 dot.Input Input by touch panelAuto -Cooling by circulation of City Water or Coolant.

Automatic Flash Point Tester (Pensky-Martens Closed Cup)

Cat.No. RFP-301

This is used for measuring a Flash Point between 50~300°C on samples, such as light oil, heavy oil, electrical insulation oil, rust preventing oil, cutting oil, various lubricant oil, cut -back asphalt, high -viscosity materials. Both of A and B method can be applied to this flash point tester.

Related Standard

JIS K2265-3 / ASTM D93 / ISO 2719

Measuring Range

40 ~ 300°C

Temp. Rising 5~6°C/min. (A method). 1~1.5°C/min.(B method)

Temp. Detection Platinum resistance thermometer (Pt 100Ω)Flash Point Detection

Temp. differentiation by thermocouple

Sample Agitation

105±15rpm (A method)250±10rpm (B method)

System Control Digital control by 16 bit CPUDisplay TFT Color Graphic Display, 5.7 inch, 256 colors,

320 x 240 dot.Input Input by touch panelAuto -Cooling by air-cooling fan.

Automatic Flash Point Tester (Cleveland Open Cup)

Cat.No. RFC-301

This is used for measuring a Flash Point between 80~400°C on such samples as petroleum asphalt, petroleum wax, rust preventing oil, electrical insulation oil, cutting oil, heat treating oil, various lubricant oil. The flame-proof shutter equipped as a safety device extinguishes an unexpected flame in sample.

Related Standard

JIS K2265-4 / ASTM D92 / ISO 2592

Measuring Range

80 ~ 400°C

Temp. Rising 5~6°C/min. and 14~17°C/min.Temp. Detection Platinum resistance thermometer (Pt 100Ω)

Flash Point Detection

By detection of ion emitting from flash flame.

System Control Digital control by 16 bit CPUDisplay TFT Color Graphic Display,

5.7 inch, 256 colors, 320 x 240 dot.Input Input by touch panelAuto -Cooling by air-cooling fan.

AutomaticFlashPointTesterRF-301Series

RF-301 Automatic Flash Point Tester Series have three kinds of types which are selectable in accordance to the intended use. That is,

RFT-301 for Tag Closed Cup, RFP-301 for Pensky-Martens Closed Cup, and RFC-301 for Cleveland Open Cup. The ignition plug which

glows for 3 minutes from measurement start lights up a pilot burner. So there is no need of match or lighter for ignition.

By adopting a 5.7 Inch Large-Sized Color Graphic Display with Touch Panel, it became much easier to see and to operate. Heating

control, sample ignition and flash point detection are automatically carried out after a simple operation of setting an expected flash

point and touching a start switch. In addition, the display indicates not only the test status, but also the guidance of self-diagnosis on

error and false detection. The flash point is automatically revised according to atmospheric pressure, so that you can always have a

reliable result regardless of the altitude of measuring place. This series are composed of test unit and control unit, and the two units

can be placed separately according to your convenience. Printer interface and RS232C interface are equipped as standards.

7

RIGO2008_en.indd 8 2009/08/21 13:52:33

PETROLEUM TESTERS

Spectrophotometric Colorimeters (Manufacturer : The Tintometer Ltd. in UK)

Cat.No. PFX195Series

The Lovibond® PFX195 is an economical colorimeter for optically clear samples that meets the demand for consistent and reliable colour data. It removes all subjectivity involved in colour grading, supplying unbiased readings that are unaffected by operator or environment. PFX195 colorimeters automatically measure colour and display the results directly, either according to the traditional grading scales that have been widely adopted as industry standards for colour assessment and control, or in terms of internationally recognised CIE values and spectral data.

Spectrophotometric Colorimeters (Manufacturer : The Tintometer Ltd. in UK) Cat.No. PFX195/1~5Color Scale PFX195/1 PFX195/2 PFX195/3 PFX195/4 PFX195/5

Pt-Co/Hazen/APHA Gardner Saybolt ASTM D1500 Iodine FAC

Color Scale PFX195/1 PFX195/2 PFX195/3 PFX195/4 PFX195/5

EBC ASBC European Pharmacopoeia US Pharmacopoeia CIE

Digital Tensiometer (Automatic Surface / Interface Tensiometer)

Cat.No. RTM-101

RTM-101 which has been designed by improving the existing Torsion-Balance Type Tensiometer is fully applying the Du Nouy Platinum Ring Method. Du Nouy Platinum Ring Method is widely used for measuring Surface/Interface Tension which is one of important elements in study of liquid property. Although the method requires a lot of skill, it can obtain a high accuracy by using an appropriate correction method. Zero calibration is not required in RTM-101 because the ring factors (Ring diameter and Wire diameter) are in advance registered, and the measurement are operated by a simple operation that is just to push start button.

Related Standard JIS K2241Measuring Method Du Nouy Ring Method.Measuring Range 5 to 99.9 mN/m (dyne/cm)Measuring System By load meter using photo differential balance.Detection Method Torsion-Balance Type

Accuracy ±0.5% of reading.Ring Diameter 1.000~1.999 cm (Selectable)Wire Diameter 0.001~0.099 cm (Selectable)Sample Density 0.001~9.999g/cm3 (Selectable)

Printer: OPTION


Cat.No. PFX995Series/PFX950Series

The Lovibond® PFX995 is designed to meet the colour analysis requirements in oils and chemicals processing. PFX995/P is designed for the colour analysis requirements of petroleum fuels, oils, waxes and petrochemicals. PFX995·995/P can also be displayed in terms of spectral data and CIE values. The Lovibond® PFX950·950/P are an economical version of the PFX995·995/P incorporating the popular scales that meet the colour analysis requirements of many oil refineries. They include both Saybolt Colour and ASTM Color-scales that are accepted internationally for oil analysis -as well as Platinum Cobalt Colour for oil derivatives and petrochemicals.

Spectrophotometric Colorimeters (Manufacturer : The Tintometer Ltd. in UK) Cat.No. PFX995·PFX950 / PFX995P·PFX950P (Oils/Chemicals)Color Scale PFX995 PFX950 PFX995P PFX950P

Lovibond RYBN AOCS Gardner Hazen/APHA Saybolt ASTM D1500

Color Scale PFX995 PFX950 PFX995P PFX950PFAC Chlorophyll A & B Beta Carotene Iodine IP Units CIE

※ :Option


Cat.No. PFX880Series

This Series are limited scale colorimeters: the PFX880/L expresses colour in terms of the Red,Yellow, Blue and Neutral units that make up the Lovibond® Colour scale; the PFX880/AT gives colour data according to the AOCS-Tintometer Colour scale, a modified red and yellow version of the Lovibond® scale. PFX880/P is a high precision spectrophotometer for objective colour analysis of petroleum fuels, oils, waxes and petrochemicals according to the Saybolt and ASTM Color scales. On three instruments, results can also be displayed in terms of CIE values and spectral data.

Spectrophotometric Colorimeters (Manufacturer : The Tintometer Ltd. in UK) Cat.No. PFX880L·PFX880AT·PFX880PColor Scale PFX880L PFX880AT PFX880P

Lovibond RYBN AOCS GardnerHazen/APHASaybolt ASTM D1500

Color Scale PFX880L PFX880AT PFX880PFACChlorophyll A & B Beta Carotene Iodine IP UnitsCIE

※ :Option

8

RIGO2008_en.indd 9 2009/08/21 13:52:49

PETROLEUM TESTERS

Visual Colorimeter Model F (Manufacturer : The Tintometer Ltd. in UK)

Cat.No. 370-AF900F

The Lovibond® Tintometer is a visual colorimeter designed to optimise the use of Lovibond® glass filters. The Lovibond® glasses are introduced into the comparison field by a simple system of sliding racks, allowing the user to compare the colour of light which is either transmitted through or reflected from the sample with that transmitted through the glasses. A series of neutral glasses in racks is also supplied; these can be introduced into the sample field to dull the colour of products which are too bright to obtain a good colour match using Lovibond® Red, Yellow or Blue glasses. The racks are varied until a visual colour match is found for the light from the sample and its colour can then be expressed in Lovibond® units.

Measuring principle

Visual, in terms of Lovibond® units

Modes Transmittance, reflectanceReading Lovibond RYBN

Range Red 0.1 -79.9, Yellow 0.1 -49.9 Blue 0.1 -3.9, Neutral 0.1 -3.0

Light source 2 x 12 Volt, 10 Watt tungsten halogen lampIlluminant Approximates to daylightPath length Up to 153 mm (6”)

Gardner Comparator 3000 (Manufacturer : The Tintometer Ltd. in UK)

Cat.No. 374-AF228

The Gardner Colour scale is a single number colour scale for grading light transmitting Scale samples with colour characteristics ranging from light yellow to brownish red. It is widely used for oils, paint and chemicals, such as resins, varnishes, lacquers, drying oils, fatty acids, lecithin, sunflower oil, linseed oil. With a 3 -section field of view, the sample and two adjacent standards on the Gardner Colour scale are viewed simultaneously, making it easier to achieve the optimum colour match.

Related Standard

JIS K0071·K3331

Measuring range 1~18Disc 4/30-1 (left hand) 1, 3, 5, 7, 9, 11, 13, 15, 17

4/30-2 (right hand) 2, 4, 6, 8, 10, 12, 14, 16, 18Path Length 10mm (Test Tube)Light source Tungsten halogen lamp, 12 Volt, 20 Watt

Petroleum Oils Comparator (Manufacturer : The Tintometer Ltd. in UK)

Cat.No. 379-AF650

The Lovibond® Petroleum Oils Comparator (POC) conforms to ASTM D1500 for visual determination of ASTM Color by direct comparison with coloured glass standards. It is widely used for colour grading of petroleum products such as lubricating oils, heating oils and diesel fuel. The POC is a 3-field instrument which incorporates the 16 glass standards that make up the scale in a pair of discs. With a 3-section field of view, the sample and two adjacent standards on the ASTM Color scale are viewed simultaneously, making it easier to achieve the optimum colour match.

Related Standard

JIS K2580 / ASTM D1500

Measuring range 0.5 -8Disc Disc 1 0.5, 1.5, 2.5, 3.5, 4.5, 5.5, 6.5, 7.5

Disc 2 1, 2, 3, 4, 5, 6, 7, 8 Path Length 33mm (Test Tube)Light source Tungsten halogen lamp, 12 Volt, 20 Watt

Photo: 374–AF228

Automatic Softening Point Tester (Ball and Ring Method)

Cat.No. RSP-102

RSP -102, which is consisted of Test Unit, Control Unit, and In -Output Unit, is designed for automatically measuring Softening Point of asphalt, resins, edible oils etc. The detection system has been designed to distinguish the heat haze hovering around and the drop of ball. The micro computer equipped in control unit controls test program, Data input -output, Safety Management etc.

Related Standard

JIS K2207 ·K5601-2 -2 ·K6863 ·K7234

Measuring range 5~80°C / 80~200°C(two ranges)Temp. detection Platinum resistance thermometer (Pt 100Ω)Detection Method By Photo -Electric DetectionSystem Control Digital Control by 8 bit CPU

Temp. Gradient 5±0.5°C/min.Temp. Control P.I. ControlAgitator Magnetic AgitatorHeating Bath Glass BeakerHeating Medium

Water (low Softening point)Glycerin (high softening point)

Printer: OPTION

Automatic Penetrometer

Cat.No. RPM-101

This apparatus can be used widely in various fields of industry to measure the hardness not only of petroleum products such as asphalt, wax, grease, etc., but also of silicone, cosmetics and foods. The operational performance has been improved by adopting VFD (vacuum fluorescent display) Display which has high level of visibility and by developing switches which have been minimized in number. By changing plunger, it is able to measure Needle-Penetration, Standard Cone- Penetration, or Micro Cone-Penetration.

Related standards

ASTM D 5, JIS K 2207 and K 2208 (for asphalt)ASTM D 1321 and JIS K 2235 (for wax)ISO 2137 and JIS K 2220 (for grease)

Measuring range 0 to 63 mmWait time 0 to 9999.9 secDuration time 0 to 9999.9 sec

Bound pair Setting

0.1 to 63.0 mm (Selectable)

Display VFD (vacuum fluorescent display), 24 digits x 2 linesPlunger leveling

Manual (two-step adjustment by the coarse- and fine- leveling knobs)

System control Digital control by 4 -bit CPU

9

RIGO2008_en.indd 10 2009/08/21 13:53:00

PETROLEUM TESTERS

Automatic Pour Point Tester ( 1 unit ~ 3 units)

Cat.No. RPP-01CML (1 unit) / RPP-02CML (2 units) / RPP-03CML (3 units)

The apparatus generally consists of a cooling unit and measuring unit. The cooling unit incorporates a cooling bath and two refrigerators. The measuring unit has built in it a test bath having a compact, special structure made of a metal, and being able to tilt itself. Each test bath can separately control the temperature by linear gradient, or in stages.This apparatus is used for testing pour point of light and heavy oils as well as lubricants and other kinds of oils, and its detection system using photo-sensor enables the test to be completed, under similar conditions to visual checking, without disturbing the sample surface. It can also detect highly accurately any delicate Pour Point Changes caused by a continuous change of viscosity, or caused by a change of added amount of Flow-Improver.

Related standards

JIS K2269/ASTM D97

Measuring range 45~-60°CTemp. detection Platinum resistance thermometer (Pt 100Ω)PP Detection Photo-electric detection

Measuring pitch 1°C, 2.5°C and 3°C selectableCooling Method

Dual refrigerator circulation type (Automatic coolant circulation)

Temp. Program In stages according to JIS, or by linear gradient.Temp. Control Proportional Control and heater On/Off

Automatic Pour, Cloud & Cold Filter Plugging Point Tester ( 1 unit~3 units)

Cat.No. RPCF-01CML (1 unit) / RPCF-02CML (2 units) / RPCF-03CML (3 units)

This, a sister model which Cold Filter Plugging Point Measurement Function has been added to RPC Series, is a multifunctional model which can measure major three kinds of low temperature fluidity tests in one set.A clump type photo-sensor is adopted for CFPP Detection. Upside photo-sensor detects the sample surface and decides suction time. Low side photo-sensor detects if the sample sucked up has been returned or not, and decides fall time.

Related standards

JIS K2269/ASTM D97 (Pour Point)JIS K2269/ASTM D2500 (Cloud Point)JIS K2288/ASTM D6371/IP 309 (Cold Filter Plugging Point)

Measuring range 45~-60°CTemp. detection

Platinum resistance thermometer (Pt 100Ω)

PP Detection Photo-electric detectionCP Detection Photo-electric detection ( with glass-fiber light guides)

CFPP Detection Photo-electric detectionMeasuring pitch

1°C, 2.5°C and 3°C selectable (Pour Point)Sequential measurement at every 0.1°C (Cloud Point)1°C (Cold Filter Plugging Point)

Cooling Method



Photo: RPCF–03CML

Photo: RPP–01CML

Automatic Pour & Cloud Point Tester ( 1 unit ~ 3 units)

Cat.No. RPC-01CML (1 unit) / RPC-02CML (2 units) / RPC-03CML (3 units)

This is a sister model which Cloud Point Measurement Function has been added to RPP Series. It measures Cloud Point continuously after measuring Pour Point (Only when using Continuous PP/CP Sensor). For detection of cloud point, RPC Series adopt a photo-sensor and glass-fiber light guides in combination to continuously detect temperatures at which the bottom of a sample-filled test tube becomes clouded.

Related standards

JIS K2269/ASTM D97 (Pour Point)JIS K2269/ASTM D2500 (Cloud Point)

Measuring range 45~-60°CTemp. detection Platinum resistance thermometer (Pt 100Ω)PP Detection Photo-electric detectionCP Detection Photo-electric detection ( with glass-fiber light guides)

Measuring pitch

1°C, 2.5°C and 3°C selectable (Pour Point)Sequential measurement at every 0.1°C (Cloud Point)

Cooling Method



Photo: RPC–02CML

Automatic Pour/ Pour & Cloud/ Pour, Cloud & Cold Filter Plugging Point Tester (4 Units / 6 Units Type)

Cat.No. RPP-104J / RPC-104J / RPCF-104J (4 units) RPP-106J / RPC-106J / RPCF-106J (6 units)

This is 4 Units/6 Units Type of RPP, RPC and RPCF Series. The vacant space in the upper part of test bath enables the operation to be easy.

Related standards

JIS K2269/ASTM D97 (Pour Point)JIS K2269/ASTM D2500 (Cloud Point)JIS K2288/ASTM D6371/IP 309 (Cold Filter Plugging Point)

Measuring range

45~-60°C

Temp. detection


PP Detection Photo-electric detectionCP Detection Photo-electric detection ( with glass-fiber light guides)

CFPP Detection

Photo-electric detection

Measuring pitch

1°C, 2.5°C and 3°C selectable (Pour Point)Sequential measurement at every 0.1°C (Cloud Point)1°C (Cold Filter Plugging Point)

Cooling Method



Photo: RPC–106J

10

RIGO2008_en.indd 11 2009/08/10 12:04:06

PETROLEUM TESTERS

Rapid Pour & Cloud Point Tester ( 1 unit, 6 units)

Cat.No. RPC-201 (1 unit) / RPC-206 (6 units)

RPC-201/RPC-206 Series have been developed to meet the increasing demands for rapid data acquisition and environmental consideration. It detects sample of –60°C just in 40 minutes, and the measurement accuracy by using dual-sensor of photo-electric detection and pressure detection is even equal to existing tilt method of JIS. RPC-201/RPC-206 Series is one of promising next generation rapid testers for Pour Point and Cloud Point.

Related standards

JIS K2269/ASTM D97 (Pour Point)JIS K2269/ASTM D2500 (Cloud Point)

Measuring Range

48~–30°C (with Circulation of Tap Water at 20°C )48~–60°C (with Circulation of Coolant at less than –38°C)

Temp. Detection Platinum resistance thermometer (Pt 100Ω)

PP Detection by dual-sensor of photo-electric detection and pressure detection

CP Detection Photo-electric detection (Reflecting light detection)Measuring pitch

1°C, 2.5°C, and 3°C selectable (Pour Point)Sequential measurement at every 0.1°C (Cloud Point)

Cooling Method Electric Cooling by Thermo-module

Automatic Cold Filter Plugging Point Tester (1 unit ~ 3 units)

Cat.No. RCF-01ML / RCF-02ML / RCF-03ML RCF-01CML / RCF-02CML / RCF-03CML

Low side photo-sensor, which detects if the sample sucked up has been returned or not, is equipped as standards.Each test bath can separately control the temperature by linear gradient, or in stages.In the staged control by circulation between two refrigerators, the temperature of test bath are orderly shifted into 48°C, –34°C, –51°C and –67°C. In the linear gradient mode, the bath can be controlled not only at a rate of °C per minute, but also at a slow rate of °C per hour which is usually used for field test.

Related standards

JIS K2288/ASTM D6371/IP 309

Measuring Range

45~–60°C

Temp. Detection Platinum resistance thermometer (Pt 100Ω)Meniscus Detection


Reverse Plugging Point Detection


Measuring pitch

1°C

Cooling Method


Staged Control

Automatic 4 staged temperature control 48°C, –34°C, –51°C and –67°C

Linear Gradient Control

°C/min. or °C/hr.

Temp. Control Proportional Control and heater On/Off

Rapid Freezing Point Tester

Cat.No. RFZ-101

Just by injecting the sample into the apparatus and pushing Start Button, you can have a freezing point of the sample in a time as short as 5 to 10 min. The test unit is cleaned by a sample itself, not using any solvent. No needs to input conditions at every test. The Cloud Point Measurement Function can be added as an option.

Related Standards

JIS K2276/ASTM D2386

Measuring Range

10~-70°C/ When circulating coolant at –40°C

Temp. Detection Platinum resistance thermometer (Pt 100Ω)

Freezing Point Detection

Photo-electric Detection

System Control Digital Control by 8 bit CPUCell Aluminum CellCooling Electronic Refrigeration by two thermo modules

Automatic Vacuum Distillation Analyzer

Cat.No. RVD-201-10 (10 Torr) / RVD-201-100 (100 Torr) RVD-201MF-10 (10 Torr) / RVD-201MF-100 (100 Torr)

RVD-201 Series automatically analyze, at a reduced pressure, the distillation of petroleum products which are thermally decomposed under normal pressure. Fractionation Stop Function according to Distillates Quantity or Top Temperature is equipped. Data measured and distillation curve are output by printer. RVD-201MF(4 fractionation type), to which RVD-201 has been upgraded, separates the distillates into 4 cylinders according to conditions prescribed based on temperature or distillates quantity under same pressure. There are two type, 1~10 Torr (0.133~1.33kPa) and 1~100 Torr (0.133~13.3kPa).

Related standards

JIS K2254/ASTM D1160

Measuring Range

Room Temp. ~ 400°C(at reduced pressure)

Resolution 1°CTemp. Display LED Digital DisplayTemp. Detection J Thermoelectric Couple (Top/Bottom)Distillation Rate 4~8mL/Min.

Distillation Control

PID Control

Meniscus Detection

Photo-electric Detection

Pressure Detection

Capacitance Type Pressure Transducer

Cooling Water Circulation

Tap Water/ Hot Water, Automatic Switching

Photo: RVD–201MF

Printer: OPTION

11

RIGO2008_en.indd 12 2009/08/10 12:04:14

PETROLEUM TESTERS

Automatic Aniline Point Tester (U-Tube Method)

Cat.No. RAP-01UF

RAP-01UF automates the procedure of U-Tube Method for measuring Aniline Point of petroleum products. The Photo-electric Sensor monitors the turbidity of aniline-sample mixture flowing through the center of U-Tube, records the temperatures at which the mixture becomes clearest and most turbid, and calculates the aniline point which is between the two temperatures by applying constants. Rapid mode is available, and a mixed aniline point can be also measured by low temperature model (5~40°C).

Related Standards

JIS K2256/ASTM D611

Measuring Range

Room Temp.~170°C5~40°C(Only when using low-temp. unit)

Temp. Display 0~299.9°CTemp. Detection Platinum resistance thermometer (Pt 100Ω)Aniline Point Detection

Photo-electronic Detection

System Control Digital control by 8 bit CPUTemp. Rising 1~2°C/Min. or Rapid heatingTemp. Descending

0.5~1°C/Min.(with air pump)

Cooling Introduction of external air through a solenoid valveOption Air Pump

Micro Carbon Residue Tester (Manufacturer : ALCOR Petroleum Instruments, Inc. in USA)

Model MCRT-160

Alcor's MCRT-160 provides safe, simple measurement of a petroleum product's tendency to thermally degrade and form coke under high temperature pyrolyzing conditions. Its powerful digital control over all ASTM D 4530 test steps delivers results equivalent to Conradson Carbon (ASTM D 189) with significantly less inconvenience or fuss. The operator only has to weigh the initial and final samples and start the test. The MCRT-160 automatically executes the factory programmed ASTM D 4530 test program. Plus, for added convenience and versatility, it can even be programmed to automate your own specialized time-temperature test profiles.

Related Standards


Measuring Method

Micro Method

Number of Samples

Up to 12 samples (Simultaneously)

Temp. Range Ambient to 600°C

Temp. Indication Digital IndicationSystem Control Programmable ControllerTemp. Detection Type J thermocoupleMeasuring Range

Carbon Residue from 0.01% to 30%

Flow contro 150ml/min. or 600ml/min. (Automatic flow control)Purge Gas N2 gas

Automatic Dropping Point Tester (2 units)

Cat.No. RDP-102

Just by setting the name of a specimen to be tested and an expected dropping point using the keyboard of the apparatus, the specimen is automatically heated along a predetermined temperature gradient, the first drop of the specimen from the grease cup is optically detected, and the dropping point thus determined is printed out from the printer. In Rapid Mode, even a specimen having Dropping-Point over 200°C can be measured rapidly. The equipped magnetic grease receiver makes it easy to clean dropped grease.

Related Standards

JIS K2220/ASTM D566

Measuring Range

Room Temp.~280°C

Temp. Display 0~299.9°CTemp. Detection


Dropping Point Detection

Photo-electronic Detection

System Control Digital control by 8 bit CPUTemp. gradient 5~7.5°C/min. or 1~2°C/min.Cooling Automatic cooling by air fanHeating Bath Integrated two columnar air bath. (made of glass)Heating Medium #100 Silicon Oil(Option),or equivalent

Printer: OPTION

Automatic Frass Breaking Point Tester

Cat.No. RBP-01L (1 unit) / RBP-02L (2 units) / RBP-03L (3 units)

An asphalt to be tested is coated thin on a plaque (Springy steel), the sample on the plaque is cooled under specified conditions, the plaque carrying the sample on is bent each time the test temperature falls by 1°C and the temperature at which the sample first becomes brittle is measured. A Microphone equipped detects the cracking sound which indicates the appearance of cracks in the sample. The operation is so easy that what to do is just to set a sample and to press start button.

Related Standards

JIS K2207/IP 80

Measuring Range

Room Temp.~-30°C

Temp. Detection Platinum resistance thermometer (Pt 100Ω)Breaking Point Detection

Detection of cracking sound by microphone

System Control Digital control by 8 bit CPUMeasuring Pitch at every 1°C fall.Temp. Gradient 1°C/min.Cooling Dual refrigerator circulation type (Automatic

coolant circulation)Temp. Control Proportional Control and heater On/OffPhoto: RBP–01L

12

RIGO2008_en.indd 13 2009/08/10 12:04:35

PETROLEUM TESTERS

RBOT Photo-Electric Pressure Recording System.

Cat.No. RBOT-02 (2 units) / RBOT-04 (4 units)

Pressure Transmission Method by Telemeter Type or Pressure Transformer with Slip Ring has been designed as an alternative to Self-Registering Pressure Gauge, but its expensive price has been one of the greatest weaknesses. The Photo-Electric Pressure Recorder adopted in this tester is inexpensive, fails scarcely, and has simple structure. It continuously reads the deflection of the Bourdon Tube Pressure Gage Pointer optically from outside without contact with gage pointer, and outputs analog data. If optional Computer Data Process System is adopted additionally, it determines pressure drop point and saves data in hard disc.

Related Standards


Operating Temp. 150°CTemp. Control Accuracy

± 0.1°C

Temp. Control PID ControlTemp. Detection Platinum resistance thermometer (Pt 100Ω)Motor Synchronous Motor

Pressure Gauge Bourdon Tube Pressure Gage, 150mm¢Pressure Range

0~1.5 Mpa (Min. Scale Value 0.02 Mpa)

Photo-Electric Detector

By LED and Photo-Transistor

Pressure Reading Accuracy

±1% of full scale

Analog Output 4 Range ( 10mV. 100mV, 1V, 10V)Photo: RBOT–02

Existent Gum Appratus (Air and/or Steam-jet Type) (5 units)

Cat.No. REG-05 / REG-05S

This apparatus which is for measuring existent gum in gasoline and aviation fuel has a compact size and space-saving design. The fume hoods equipped to prevent steam from being left out can be connected to external exhaust pipe. REG-05S equips Automatic Water Supply Function for Steam-Jet Evaporation Test.

Related Standards

JIS K2261/ASTM D381· ISO 6246

Operating Temp.

160~165°C (Air Jet)232~246°C (Steam Jet)


±1.5°C

Temp. Control PID Control

Temp. Detection Platinum resistance thermometer (Pt 100Ω)Evaporation Bath

Aluminum Block, 2kW

Steam Superheater

Aluminum Block, 2kW

Steam Generator Stainless-steel Pressure-resistant Vessel, 25L, 6kWFlowmeter Bourdon Tube Gauge

Gasoline Oxidation Stability Test Apparatus / Gasoline Oxidation Stability Test Apparatus (with PC for data process)

Cat.No. 640DX-02 (2 units) / 640DX-04 (4 units)

640DXPC-02 (2 units) / 640DXPC-04 (4 units)

This is a new system which adopts Pressure Transducer instead of Self-Registering Pressure Gauge having double needle. The pressure change which has been converted into electric signal is continuously recorded by dotting recorder, so long time measurement can be operated with this system. If optional Computer Data Process System is adopted additionally, it determines pressure drop point and saves data in hard disc.

Related Standards


Operating Temp. 99.5 ~ 100.0°CTemp. Control Accuracy

± 0.1°C

Temp. Control PID Control

Temp. Detection Platinum resistance thermometer (Pt 100Ω)Analog Output 90.0 ~ 105.0°C / 0 ~ 5V DCPressure Range 0 ~ 1.5 Mpa Resolution 0.001 MpaAnalog Output 0 ~ 1.5 Mpa / 0 ~ 5V DC

Photo: 640DXPC–04

Apparent Viscosity Test Apparatus / Low Temp. Apparent Viscosity Test Apparatus (with PC for data process)

Cat.No. RAV-101 / RAV-101M

This apparatus sequentially switches the range of pressure gauge to 0.5Mpa, 2.0Mpa, and 10Mpa according to pressure rise, and stops pump as soon as the pressure reaches to 10Mpa. Pressure changes during the above procedure are recorded in real time into PC through data collection software, and can be displayed even in MS-Excel graph. When the pressure has come to equilibrium after sample was ejected from capillary, the read of pressure gauge can be imported by pushing import button of screen. This apparatus calculates Apparent Viscosity from the pressure obtained by using two tooth-gears, and displays graphs of Apparent Viscosity as well as Shear Rate Curve.

Related Standards


Pressure Range 0~10MPaPressure Designation

0~0.500MPa0~2.000MPa0~10.00MPa

Operating Temp. Ordinary Temp, or –20~80°C

Temp. Indication -99.9~99.9°CTemp. Detection Platinum resistance thermometer (Pt 100Ω)Tooth-Gear Pump

ZENITH, BPB-4776 Type.

Calculation Item

Shear Rate, Apparent Viscosity, Shear Stress.

Graph Apparent Viscosity, Shear Rate Curve.

Photo: RAV–101

13

RIGO2008_en.indd 14 2009/08/10 12:04:51

PETROLEUM TESTERS

Other Petroleum TestersSampling Bottle, Density, Distillation & Vapor Pressure

Weighted Beaker 100Weight Beaker (Wide Mouth) 101Cylinder Sampler 105Capillary tube 106Shieve 107Sampling Rope 100-06RPetroleum Densimeter I -A 110- I -10ASPetroleum Densimeter I -B 110- I -10BSPetroleum Densimeter II 110- II -10SGraduated Pycnometer I 122Specific Gravity Bottle, Wadon 123Specific Gravity Bottle, Hubbard 124Constant Temp. Bath for Density Determination. 125R-051Gas Density Determination Apparatus (Schilling Method) 130-J 130-UEngler Distillation Apparatus 150-01ECrude Distillation Apparatus 160-01EVacuum Distillation Apparatus 170-01EConstant Temp. Bath for Vapor Pressure Determination 180-032Bomb for Vapor Pressure Determination 182Pressure Gauge for Vapor Pressure Determination 184Pressure Correction Apparatus (Mercury Column) 186-HGPressure Correction Apparatus (Weight Drop) 186-DW

Flash Point TesterTag Closed Cup (TCC) 210-ERPensky-Martens Closed Cup (PMCC) 200-ESRCleveland Open Cup (COC) 220-ERTag Open Cup (TOC) 256-ERSimple Flash Point Tester (Medium Temp.) 230-CMSimple Flash Point Tester (High Temp.) 230-CH

Water Separability, Foaming Characteristics, etc.Water Separability Tester 300-03Vapor Separability Tester 320-01Foaming Test apparatus 330-022Air Release Properties tester 335-01Panel Coking Tester 350-01P

Visual ColorimeterSaybolt Colorimeter 360-01Lovibond Colorimeter F, A, C 375-AF229Lovibond Colorimeter E, B, C 376-AF607Lovibond Hazen/A.P.H.A 377-#2150Lovibond Hazen/A.P.H.A 377-#2250

Kinematic Viscosity BathFor Medium∙Low Temp. 4 units 403C-142For Medium Temp.7 units 404-072For High Temp. 7 units 404-073For Low Temp. 2 units 405-121For Low Temp. 2 units 405C-121LFor Low Temp. 3 units 405R-031MFor Low Temp. 3 units 405R-031LViscosity meter of Asphalts by Capillary Viscometer, 3 units 824-03

Glass Capillary ViscometerUbbelohde Viscometer 410-UCannon-Fenske Viscometer 410-CCannon-Fenske Reverse Flow Viscometer (Opapue) 410-CRCannon-Manning Semi -micro Viscometer 410-CMSAtlantic Viscometer 410-ATZeitfuchs Viscometer 410-ZZeitfuchs Cross-Arm Viscometer 410-ZRLantz -Zeitfuchs Reverse Flow Viscometer (Opaque) 410-LZBS/IP Reverse Flow U-Tube Viscometer 410-BSModified Ubbelohde Viscometer 410-UI -aModified Ubbelohde Viscometer 410-UI -bModified Ubbelohde Viscometer 410-UISVMC-Type Ubbelohde Viscometer 410-UAVMC-Type Ubbelohde Viscometer (Dilution) 410-UDAVMC-Type Cannon-Fenske Viscometer 410-CAVMC-Type Cannon-Fenske Reverse Flow Viscometer 410-CRAAsphalt Institute Vacuum Viscometer 410-AIVCannon-Manning Vacuum Viscometer 410-CMV

Rotational Viscometer & Low Temp. BathLow Temp. Viscosity Bath (1 bath, 5 units) 405R-051RVLow Temp. Viscosity Bath (1 bath, 6 units) 405R-061RVLow Temp. Viscosity Bath (1 bath, 8 units) 405R-081RVLow Temp. Viscosity Bath (2 bathes, 5 units) 405R-051RV- IILow Temp. Viscosity Bath (2 bathes, 8 units) 405R-081RV- IIBrookfield Viscometer LVTBrookfield Viscometer LVDV-EBrookfield Viscometer LVDV- III Ultra

Viscometers for Inks & Paints, etc.Rigo's Zahn Cup (No. 2 ~ No. 7) 417Spread Meter 419Ford Cup No. 4 420Flow Cup (No. 3 & No. 4) 421Visco-Gauge (Field Viscometer) 418Density Cup 135

Pour and Cloud Point TestersPour and Cloud Point Tester, 2 units 500-02LPour and Cloud Point Tester, 4 units 500-04LPour and Cloud Point Tester, 4 units 510R-14MPour and Cloud Point Tester, 4 units 510R-14LPour and Cloud Point Tester, 1 Bath, 4 units 520R-14LPour and Cloud Point Tester, 3 Bathes, 4 units 520R-34MPour and Cloud Point Tester, 4 Bathes, 4 units 520R-44MPour and Cloud Point Tester, 4 Bathes, 4 units 520R-44L

Oxidation Stability, Corrosion, GumISOT Tester (Belt Dri ve) 600-06ISOT Tester (Direct Dri ve) 600-06DRust Preventing Characte r istics Apparatus (Belt Drive) 610-06Rust Preventing Characteri s tics Apparatus (Direct Drive) 610-06DTurbine Oil Oxidation S tability Tester, 10 units 620-10Turbine Oil Oxidation S tability Tester, 20 units 620-20Turbine Oil Oxidation S tability Tester, 30 units 620-30Rotating Bomb Type Oxidat ion Stability Tester, 2 units 630-02Rotating Bomb Type Oxidat ion Stability Tester, 3 units 630-03Rotating Bomb Type Oxidat ion Stability Tester, 4 units 630-04Rotating Bomb Type Oxidation Stability Tester (with Photo-Electric Pressure Recorder), 2 units RBOT-02Gasoline Oxidation Stability Tester, 2 units 640-02Lubricant Oil Thermal Stability Tester 645-FAircraft Lubricating Oil Oxidation Stability Tester 655-08Heat Treating O i l Stability Tester 657-08Gasoline Rust Preventing Characteristics Apparatus 659-04Copper Strip Corrosion Apparatus (Bomb Type), 5 units 660-05BCopper Strip Corrosion Apparatus (Tube Type), 12 units 660-12TSilver Strip Cor rosion Apparatus, 3 units 665-03Existent Gum Tester (air jet evaporation type) 672-05

Aniline Point, FIA, Freezing Point, Carbon Residue, etc.Aniline Point Tester (Tube Method) 710Aniline Point Tester (U-Tube Method) 712Aniline Point Tester (Thin Film Method) 714Hydrocarbon Types Analyzer (FIA Method) 720-02Depentanization Apparatus 725-01Aviation Fuel Freezing Point Tester 730-01Antifreeze Liqu id Freezing Point Tester 735-01Salt content Apparatus of Crude Oil 745-02Quantitative Analyzer of Precipitate 750-01Water Content Testing Apparatus 760-01EWater and Sediment Analyzer 765-04Carbon Residue Apparatus (Conradson) 767-01GCarbon Residue Apparatus (Ramsbottom) 770-05

Asphalt TesterPenetrometer 840S-01Asphalt Penetrometer 802Wax Penetrometer 804Constant Temp. Bath for Penetrometer 806Softening Point Tester (Ring and Ball Method) 808-02EAsphalt Brittleness Point Tester 810-01Asphalt Ductilit y Testing Apparatus 812-03Asphalt Ductility Testing Apparatus 812C-03Asphalt Evaporation Loss Tester 848-03Asphalt Vacuum Capi l lary Viscometer 824-03

Lubricating Grease TestersCone Penetrat ion Apparatus 840S-01Micro Cone Penet ration Apparatus 840M-01Grease Worker 844-A, BMechanical Grease Worker 846-02Evaporation Loss Tester (B Method) 848-03Oil Separation Tester 850Dropping Po int Tester 852-02EGrease Oxidation S tability Tester 854-03Apparent Viscosity Testing Apparatus 858-01, 858-01DLow Temp. Apparen t Viscosity Testing Apparatus 860R-01DMEWater Washout Tester 864-01Leakage Tendencies of Automotive Wheel Bearing Grease 866-01Low Temp. Torque Tester 868R-02MRoll Stability Test Apparatus for Lubricating Grease 870-02

LP Gas TestersLPG Density Determina t ion Apparatus (Type I) 882- ILPG Density Determina t ion Apparatus (Type II) 882- IIPressure -Resistant Container for LPG Density Determination 884LPG Vapor Pressure Tester 888-03LPG Copper St r ip Corrosion Apparatus 892-03LPG Sulfur Testing Apparatus 894LPG Evaporation Loss Tester 894

14

RIGO2008_en.indd 15 2009/08/10 12:04:52

Due to RIGOSHAs' product improvement, specifications subject to change without notice.

Saitama Sales & Technical CenterAdress: 3-14-20 Harayama Midori-ku Saitama-shi Saitama-ken 336-0931 JapanPhone: +81-48-882-3086 Facsimile: +81-48-811-1202Email: [email protected]

Distributors

PETROLEUM TESTERSDIGEST CATALOG

RIGOSHA & Co., Ltd.

RIGO2008_en.indd 16 2009/08/10 12:04:53

petroleum testers...viscometer type modified ubbelohde viscometer(ui-b type) required sample amount...

Documents