personal protective equipment. protective headgear worn near electric lines and equipment shall be...
TRANSCRIPT
![Page 1: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/1.jpg)
Personal Protective Equipment
![Page 2: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/2.jpg)
Responsibilities The use of PPE is a control measure
that is to be used only after a hazard evaluation identifies hazards associated with a particular job or activity, and it is determined that the hazards cannot be eliminated and/or controlled to an acceptable level through engineering design or administrative actions. Utilize process and engineering controls before PPE to protect employees. 05.A.01.a
![Page 3: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/3.jpg)
Based on hazard evaluations conducted by supervisors, employers shall identity and select, and each affected employee shall use, PPE and safety equipment that will provide appropriate protection.
05.A.01.b
Responsibilities
![Page 4: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/4.jpg)
Employers shall communicate PPE and safety equipment decisions to each affected employee. Employees shall use all PPE and safety equipment that may be required to maintain their exposure within acceptable limits.
05.A.01.c
Responsibilities
![Page 5: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/5.jpg)
Employees shall be appropriately trained in the use and care of all required PPE and safety equipment.
Employees must be trained in and shall demonstrate an understanding of the following aspects of PPE prior to use:
- selection (for specific hazard); - donning, doffing and adjusting; - limitations and useful life; ` - inspection and testing; - and proper care including maintenance, storage
and disposal.
05.A.02.a
Training Requirements
![Page 6: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/6.jpg)
The employer shall verify through written certification that each affected employee has received and understood the required training. The written certification shall identify the name of each employee trained, the dates of the training, and the subjects taught.
05.A.02.c
Training Effectiveness
![Page 7: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/7.jpg)
Defective or damaged equipment shall not be used. It shall be tagged as out of service and/or immediately removed from the work site to prevent use.
05.A.04.a
Defective Equipment
![Page 8: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/8.jpg)
When employees provide their own safety equipment or PPE, the employer is responsible for assuring its adequacy in protecting against the hazard and its state of repair.
05.A.05
PPE by Employees
![Page 9: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/9.jpg)
Person in charge of the project site will assure that all visitors entering the site are properly protected and are wearing or provided with the appropriate PPE.
Site personnel should maintain a stock of common PPE, i.e., hard hats, eye protection, ear plugs, reflective vests, etc., for use by visitors.
01.B.04
Project Site Visitors
![Page 10: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/10.jpg)
Minimum Work PPE Shirt with sleeves Long trousers Hard hats Reflective apparel Steel-toed shoes
05.A.06
Minimum Requirements
![Page 11: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/11.jpg)
Minimum Work PPE Shirt with sleeves Long trousers Hard hats Reflective apparel Steel-toed shoes
05.A.06
Minimum Dress Code
![Page 12: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/12.jpg)
05.A.08
Persons involved in activities that subject the hands to injury (for example, cuts, abrasions, punctures, burns, chemical irritants, toxins, vibration, and forces that can restrict blood flow) shall select and use hand protection appropriate for the hazard in accordance with ANSI/International Safety Equipment Association (ISEA) 105.
Protective Equipment
![Page 13: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/13.jpg)
Eye Protection
![Page 14: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/14.jpg)
Persons shall be provided with eye and face protection equipment, as outlined in Table 5-1, when machines or operations present potential eye or face injury from physical, chemical, or radiation agents.
a. Eye and face protection equipment shall meet the requirements of ANSI/ American Society of Safety Engineers (ASSE) Z87.1, and bear a legible and permanent "Z87" logo to indicate compliance with the standard.
b. Eye and face protection equipment shall be distinctly marked to facilitate identification of the manufacturer.
c. Employees shall use eye protection providing side protection.
05.B.01
Eye Protection
![Page 15: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/15.jpg)
Made with metal/plastic safety frames Require side shields Used for moderate impact from
particles produced by jobs such as carpentry, woodworking, grinding, and scaling
Safety Glasses
![Page 16: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/16.jpg)
When required by this regulation to wear eye protection, persons whose vision requires the use of corrective lenses in eyeglasses shall be protected by one of the following:
a. Prescription safety glasses providing optical correction and equivalent protection;
b. Protective glasses with side shields designed to fit over corrective lenses without disturbing the adjustment of the glasses;
c. Goggles that can be worn over corrective lenses without disturbing the adjustment of the glasses, or
d. Goggles that incorporate corrective lenses mounted behind the protective lenses. 05.B.02
Eye and Face Protection
![Page 17: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/17.jpg)
Protects eyes and area around the eyes from impact, dust, and splashes
Some goggles fit over corrective lenses
Goggles
![Page 18: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/18.jpg)
Laser (Welding) Safety Goggles Protects eyes from intense concentrations
of light produced by lasers Protects eyes from intense concentrations of light produced by lasers.
![Page 19: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/19.jpg)
Full face protection Protects face from dusts and splashes or sprays of
hazardous liquids Does not protect from impact hazards Face shields shall only be worn over primary eye
protection.
Face Shields
![Page 20: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/20.jpg)
Protects eyes against burns from radiant light, and protects face and eyes from flying sparks, metal spatter, and slag chips produced during welding, brazing, soldering, and cutting.
Welding Shields
![Page 21: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/21.jpg)
Operations that require the use of, or exposure to hot or molten substances (e.g. babbitting, soldering, pouring or casting of hot metals, handling of hot tar, oils, liquids and molten substances shall require eye protection:
Goggles with safety lenses and screens for side protection
Face masks, shields, and helmets giving equal protection
Lens mounting shall be able to retain in
position all parts of a cracked lens.
Eye Protection
![Page 22: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/22.jpg)
05.C HEARING PROTECTION AND NOISE CONTROL
![Page 23: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/23.jpg)
Practical engineering or administrative controls shall be considered and used when personnel are subjected to sound pressure levels exceeding the limits specified in Tables 5-3 and 5-4. When such controls fail to reduce sound-pressure levels to within the specified limit, PPE shall be selected, evaluated, provided, and used in accordance with the hearing conservation program.
05.C.02
Hearing Protection
![Page 24: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/24.jpg)
Table 5-4
Permissible DoD Noise Exposures (Government)
Duration/day Sound-pressure (hours) level dB(A) No limit 80 9 ½ 84 8 85 4 ¾ 88 3 ¼ 90 1 ½ 95 ½ 100 ¼ 105
TABLE 5-3 Permissible Non-DoD Noise Exposures (Contractor) Duration/day Sound-pressure (hours) level dB(A) 8 90 6 92 4 95 3 97 2 100 1-1/2 102 1 105 ½ 110 ¼ 115
Hearing Protection
![Page 25: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/25.jpg)
Earmuffs Earplugs Canal Caps
Examples of Hearing Protectors
05.C.07 Ear insert devices, to include disposable, preformed, or custom molded earplugs, shall be fitted to the exposed individual by an individual trained in such fitting and able to recognize the difference between a good and a poor fit. Plain cotton is not an acceptable protective device.
![Page 26: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/26.jpg)
Noise hazard areas (areas in which sound-pressure levels exceed the limits specified in paragraph 05.C.01) shall be marked with caution signs indicating both the presence of hazardous noise levels and the requirement for hearing protection.
05.C.08
Hearing Protection
![Page 27: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/27.jpg)
Head Protection
![Page 28: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/28.jpg)
All persons working in or visiting hard hat areas shall be provided with and required to wear Type I or Type II, Class G (General - low voltage electrical protection) or Class E (Electrical – high voltage electrical protection) headgear.
05.D.01
Head Protection
![Page 29: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/29.jpg)
Hard hat areas or activities are those areas with potential hazard of head injury; in general, all construction areas are considered hard hat areas.
Head Protection
![Page 30: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/30.jpg)
Points of entry to a hard hat area shall have a sign warning of the requirement to wear hard hats.
05.D.01.b
Head Protection
![Page 31: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/31.jpg)
All protective headgear shall meet the requirements of ANSI Z89.1.
a. No modification to the shell or suspension is allowed except when such changes are approved by the manufacturer.
b. Hard hats shall be worn with the bill facing forward unless the GDA has determined exceptions for certain trades in order to accommodate appropriate mission accomplishments. Headgear must be designed to accommodate these needs.
c. Protective headgear worn near electric lines and equipment shall be Class E.
d. No ball caps, knit caps, or other headdress shall be worn under the hard hat that could interfere with the fit or stability of the hard hat.
05.D.02
Head Protection
![Page 32: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/32.jpg)
Hard hats worn with reversed bill and headdress worn under the hat.
05.D.02
Head Protection
![Page 33: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/33.jpg)
05.E.01 Protective footwear that addresses the hazards identified in the PHA/AHA shall be provided and worn.
Protective Footwear
![Page 34: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/34.jpg)
Add-on type devices, such as strap-on foot, toe or metatarsal guards, shall not be used as a substitute for protective footwear and must be demonstrated by the employer to be equally effective via independent testing data for these devices.
05.E.03
Protective Footwear
![Page 35: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/35.jpg)
Personnel shall, as a minimum, wear safety-toed boots meeting ASTM Standards F2412 and F2413 while working on construction sites unless it can be demonstrated by a PHA/AHA to the GDA’s satisfaction that a different type of foot protection is required.
05.E.05
Foot Protection
![Page 36: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/36.jpg)
05.E.06 Footwear providing protection against impact and compressive forces, conduction hazards, electrical hazards, and sole puncture shall comply with the applicable requirements of ASTM F 2412-05 and F 2413-05. Footwear providing protection against impact and compression hazards shall be rated as I/75 and C/75.
05.A.08
Foot Protection
![Page 37: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/37.jpg)
a. Unexploded ordnance (UXO) personnel whose job tasks required protective footwear but require no metal parts in or on their footwear shall wear Conductive footwear (Cd) with protective toe cap/composite toe footwear.
b. Personnel participating in wild land fire
management activities shall wear leather lace-up boots with slip-resistant soles, such as a hard rubber lug-type or tractor tread, a top height of 8 in (20.3 cm) or more with composite toes. Soles shall not be made of composition rubber or plastic, which have low melting points.
Safety Shoes
![Page 38: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/38.jpg)
05.F.01 High-visibility apparel meeting, at minimum, ANSI/ISEA 07-2004
Performance Class 2 requirements, shall be worn by workers (such as, but not limited to, signal persons, spotters, survey crews and inspectors) whenever:
a. Workers are exposed to vehicular or equipment traffic at speeds up to 45 mph (72.4 kph);
b. There is limited visibility of workers exposed to mobile/heavy
equipment operations, vehicles, load handling, or other hazardous activities;
c. Reduced visibility conditions exist due to weather conditions, illumination, or visually complex backgrounds where ambient visibility is at least 50 ft (15.2 m); OR
d. Workers are involved in activities in close proximity to vehicular traffic with no protective barriers.
Note: Must wear high-visibility vest in all NAVFAC contracts.
High Visibility Apparel
![Page 39: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/39.jpg)
The apparel background material color shall be either fluorescent yellow-green, fluorescent orange-red, or fluorescent red (see ANSI/ISEA 107-2004). When choosing color, optimization of color conspicuity between the wearer and work environment shall
05.F.03
Background Colors
![Page 40: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/40.jpg)
The use of respirators is required when occupational exposure levels exceed OSHA Permissible Exposure Limits (PELs) or American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Values (TLVs), and engineering or administrative exposure controls are not feasible to implement.
05.G.01
Respiratory Protection
![Page 41: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/41.jpg)
The voluntary use of dust masks (filtering face piece respirators) is permissible in atmospheres that are not hazardous.
05.G.02
Dust Masks
![Page 42: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/42.jpg)
A written respiratory protection program shall be developed and implemented when respirators are used.
05.G.03
Respiratory Protection Program
![Page 43: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/43.jpg)
The program administrator shall have the documented knowledge and experience to understand OSHA’s respiratory protection standard (29 CFR 1910.134), evaluate respiratory hazards at the facility/project, select appropriate respirators based on facility/project hazards or potential hazard, and train employees on the use of selected respirators. 05.G.03.b.(2)
Program Administrator Qualifications
![Page 44: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/44.jpg)
All employees, with the exception of employees voluntarily using filtering face pieces, shall be medically evaluated to ensure they are fit enough to wear the selected respirators.
05.G.04
Medical Evaluation
![Page 45: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/45.jpg)
Employees wearing respirators with tight-fitting face pieces [Supplied Air Respirators (SARs) and Self-Contained Breathing Apparatus (SCBAs) included] shall be fit tested to ensure that selected respirators achieve a proper face to face piece seal.
05.G.05
Fit Testing
![Page 46: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/46.jpg)
The program administrator or his designee shall provide respirator user training annually (or when requirements change significantly due to process changes or changes in site specific operations) to personnel using respirators at the facility or project.
05.G.06
Training and Information
![Page 47: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/47.jpg)
Full body harnesses, lanyards and lifelines are considered components of personal fall protection systems.
Requirements for these components w ill be discussed later.
Fall Protection
![Page 48: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/48.jpg)
Persons working on electrical distribution systems shall be provided with the appropriate electrical protective equipment.
05.I.01
Electrical Protective Equipment
![Page 49: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/49.jpg)
Electric arc flash protection shall be provided for any person who enters the flash protection zone.
05.I.04
Arc Flash Protection
![Page 50: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/50.jpg)
Employees must wear rubber-insulating gloves where there is a danger of hand or arm injury from electric shock or arc flash burns due to contact with energized parts.
05.I.04.c
Hand Protection
![Page 51: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/51.jpg)
Inherently buoyant Type III, Type V work vests, or better USCG-approved personal flotation devices (PFDs) shall be provided and properly worn (zipped, tied, latched, etc., in closed fashion) by all persons in the following circumstances: > See 05.J.02; See Figure 5-1.
a. On floating pipelines, pontoons, rafts, or stages; b. On structures or equipment extending over or next to
water except where guardrails, personal fall protection system, or safety nets are provided for employees;
c. Working alone at night where there are drowning hazards, regardless of other safeguards provided;
d. In skiffs, small boats, or launches, unless in an enclosed cabin or cockpit; or
e. Whenever there is a drowning hazard. 05.J.01
Personal Flotation Devices (PFD)
![Page 52: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/52.jpg)
Type III Type II
Type V Type IV
Type 1
Survival Suit
Personal Flotation Devices (PFD)
![Page 53: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/53.jpg)
05.J.02.f
The USCG-approval for auto-inflatable PFD’s is contingent upon the PFD being worn, not stowed. All auto-inflatable PFDs must be worn at all times drowning hazard exists.
Inflatable PFD
![Page 54: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/54.jpg)
At least one skiff shall be immediately available at locations where employees work over or immediately next to water.
Skiffs shall be kept afloat or ready for instant launching.
05.K.01
Lifesaving and Safety Skiffs
![Page 55: Personal Protective Equipment. Protective headgear worn near electric lines and equipment shall be Class E. d. No ball caps, knit caps, or other headdress shall be worn under the hard](https://reader031.vdocuments.us/reader031/viewer/2022030506/5ab4a6487f8b9a1a048c28bd/html5/thumbnails/55.jpg)
Assess the workplace for hazards Use engineering and work practice controls to
eliminate or reduce hazards before using PPE Select appropriate PPE to protect employees
from hazards that cannot be eliminated Inform employees why the PPE is necessary, how
and when it must be worn Train employees how to use and care for their
PPE, including how to recognize deterioration and failure
Require employees to wear selected PPE
Employers must implement a PPE program where they:
Summary