perforator · 2013. 12. 9. · acc. astm-e709 destructive testing 1tensile test acc. din50125...
TRANSCRIPT
2
PERFORATOR® Oil and Gasfield Drill Pipes
◊ API approved
◊ Upsetted pipe in grade E, X, G + S
◊ Tool joint material acc. API 5DP
◊ Dimensions up to 5 1/2“ pipe
◊ Hard banding acc. to ARNCO 100 XT, 150 XT, 300 XT Tuboscope TCS 8000, TCS Titanium
◊ Length: Range 1 – 3
◊Non-destructive testing1 Ultrasonic test acc. EN 1714 and1 Magnetic particle inspection
acc. ASTM-E709
◊Destructive testing1 Tensile test acc. DIN 501251 Bending test acc.
API SPEC 5DP, latest edition1 Charpy V-notch impact test
acc. ASTM-A370
1. Engineering 2. Pipes 3. Hardbanding
4. Friction Welding 5. Heat Treatment 6. Inspection
5DP00717-1-0051
3
Contents Pages
PERFORATOR® Drill Pipe and Tool Joint Grades 4
Dimensions of Drill Pipe with Weld-On Tool Joints 5
PERFORATOR® Drill Pipe: Dimensions and Performance Properties 6 – 27
Standard Practice for Marking Tool Joints and Drill Pipe 28
Internal Coating of Drill Pipe 29
Advantage of Internal Coating 30
Certificates 31
Rights of technical modification reserved. PERFORATOR® is a registered trademark.
4
PERFORATOR® Drill Pipe and Tool Joint Grades
Drill Pipe
Internal Upset IU
External Upset EU
Internal-External Upset IEU
acc. to API Spec. 5DP
Friction welded Tool Joints
Numbered Connections NC
Internal Flush IF
Full Hole FH
Additional requirements can be designed and supplied on request.
DRILL PIPE AND TOOL JOINT GRADES
Mechanical properties of API drill pipe grades
Grade Yield strengh Tensile strengh Elongation¹ APIpsi psi psi in 2 inches
N/mm² N/mm² N/mm² %min. min. min. min.
E-75 75 000 105 000 100 000 see Spec. 5DP515 725 690 footnote
X-95 95 000 125 000 105 000 Spec. 5DP655 860 725
G-105 105 000 135 000 115 000 see Spec. 5DP725 930 795
S-135 135 000 165 000 145 000 see Spec. 5DP930 1140 1000
Mechanical properties of API tool joint grades
Yield strengh Tensile strengh Elongation Box APIpsi psi psi Hardness
N/mm² N/mm² N/mm² Brinellmin. max. min. min.
120 000 140 000 165 000 13 285 Spec. 5DP827 965 1138
5
Dimensions of Drill Pipe with Weld-On Tool Joints
Optional with 90° shoulder on box
6
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
7
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
8
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
9
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
10
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
11
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
12
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
13
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
14
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
15
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
16
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
17
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
18
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
19
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
20
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
21
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
22
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
23
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
24
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
25
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
26
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
27
PERFORATOR® Drill Pipe: Dimensions and Performance Properties
Standard Practice for Marking Tool Joints and Drill Pipe
28
Drill Pipe Marking
The following marks are applied as standard to the drill pipe body.Paint stenciling on Pipe Body.
welding areawelding
area
Drill Pipe Bodymanufacturer
API license no.
API Logo month – yearsize
nominal weight (LB/FT)Grade
here “UP”for special upset dimensions
if applicable
here SR-InformationsL2 or L3 (PSL-2 or PSL-3)if applicable
heat code no.
Tool Joint Marking
The following marks are applied as standard to the tool joints.Die stamping on Pin and Box End.
Other marking on request.
Die stamping pin end
Die stamping box end
PERFORATOR®
PERFORATOR®
Internal Coating of Drill Pipe
29
WE OFFER TOGETHER WITH TUBOSCOPE VETCO INTERNALY COATED DRILL PIPE
The drilling fluids used today can be classified from ‘non corrosive’ up to ‘extremely corrosive’.
Since within the lifetime of a drill string, the utilization will be for all different enviroments, corrosion
caused by aggressive muds has to be considered.
Advantage of Internal Coating
30
Certificates
31
PERFORATOR GmbHBei dem Gerichte • 37445 Walkenried • Germany • Fon +49 (0)5525 / 2 01-0 • Fax +49 (0)5525 / 2 01-48
eMail: [email protected] • Internet: www.perforator.de
DRILL PIPES DRILLING TOOLS INJECTION TECHNIQUE FOR MINING
AND TUNNELLING