perfect fitâ„¢ solvent weld dwv fittings d injection molded in

Perfect Fit™ Solvent Weld DWV FittingsInjection Molded in Sizes 4” – 12” Fabricated in Sizes 10” – 24”

Short Specs

4” through 12” injection molded solvent weld Drain, Waste, and Vent

(DWV) fittings shall be manufactured in accordance with ASTM D2665,

F1866, F2135, and CSA B181.2, as applicable. Injection molded

solvent weld DWV fittings shall be certified by the National Sanitation

Foundation (NSF) to meet ASTM D2665, F1866, and ASTM F2135, as

applicable; and by the Canadian Standards Association (CSA) to meet

CSA B181.2 as applicable. They shall be certified by the International

Association of Plumbing and Municipal Officials (IAPMO) to meet the

requirements of the Uniform Plumbing Code (UPC), as applicable.

ATTENTION: Plastic Trends fittings are not to be used with

compressed air or gases. Plastic Trends does not recommend that

piping systems that include its products be tested with compressed air

or gases.

Applications

The most complex installations require the most advanced fittings.

Injection molded Perfect Fit™ DWV fittings from Plastic Trends

eliminate typical problems resulting from installing a DWV system

with inconsistent, inaccurate, or non-certified fittings. When installing

or specifying Perfect Fit™ DWV you can count on a 45° bend being

exactly that, a 45° bend. Literally from every angle, Plastic Trends

understands the importance of accuracy and consistency on the job

site and provides you with a perfect fit from roof to grade.

Perfect Fit™ DWV fittings make installation of the system quicker,

easier and less costly. Productivity gains are significant when Perfect

Fit™ DWV fittings are specified and installed. Combine with our

fabricated fittings to ensure a trouble-free installation.

Certifications

Perfect Fit™ PVC Solvent Weld DWV Molded Fittings are third party

tested and listed by NSF, UPC, and CSA to meet specifications

defined in ASTM D 2665, F 1866, and CSA B181.2, where applicable.

Fabricated fittings conform to ASTM F 1866.

Product Spotlights

Test Tees

Plastic Trends is the only manufacturer to offer molded threaded test

tees with plugs available up to 12” in diameter featuring the most

compact branch in the industry. Test tees are commonly used in

DWV systems around columns or in raceways because it is in these

areas where space is often a critical factor. Plastic Trends’ test tees

are offered with a raised or countersunk plug. Refer to page D2 for

available configurations and pricing.

Fit-Rite™ PVC Adjustable Floor Flange

An exclusive addition to the Plastic Trends Perfect Fit™ DWV product

line. Plastic Trends is the only manufacturer to offer this innovative

product. Adjustable to any floor height whether it is tile over concrete or

linoleum over plywood. It can be reduced with a 4” x 3” coupling or a 4”

x 3” 90˚ closet bend and still fit in a 2” x 10” joist. Refer to page D8 for

available configurations and pricing.

D

Third Party Tested

Sam Roberts & Associates, Inc.www.StanRoberts.com

South Texas3300 CapitolHouston, Texas 77003-3305713-224-9845800-392-6583Fax: 713-224-3611

North Texas1220 Round Table Dr.Dallas, Texas 75247-3504214-637-2816800-462-1195Fax: 214-688-4155

Page D2* Denotes Molded Fitting† Denotes Assembled from Molded Components • Additional Sizes Available upon Request

• Third party tested and listed by CSA, NSF and UPC• Specifications: ASTM D2665, F1866, CSA B181.2• Non-Stock items are non-cancelable, non-returnable

Stan Roberts & Associates, Inc Houston - 800-392-6583 • Dallas - 800-462-1195Plastic Trends, Inc. Solvent Weld DWV Fittings D

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Straight Tee HxHxH 45 Degree Wye HxHxH *4 x 4 D104 7 - 44.47 *4 x 4 D304 5 - 45.58 *6 x 4 D106-4 5 50 110.93 *6 x 4 D306-4 4 - 116.48 *6 x 6 D106 4 - 120.87 *6 x 6 D306 2 - 130.87 *8 x 4 D108-4 4 - 142.05 *8 x 4 D308-4 3 - 153.80 *8 x 6 D108-6 2 - 157.62 *8 x 6 D308-6 2 - 170.23 *8 x 8 D108 2 - 197.16 *8 x 8 D308 2 - 223.57 *10 x 4 D1010-4 1 12 248.19 *10 x 4 D3010-4 1 - 272.71 *10 x 6 D1010-6 1 10 305.38 *10 x 6 D3010-6 1 - 353.75 *10 x 8 D1010-8 1 10 342.61 *10 x 8 D3010-8 1 - 418.60 *10 x 10 D1010 1 10 386.58 *10 x 10 D3010 1 - 478.76 *12 x 4 D1012-4 1 8 335.58 *12 x 4 D3012-4 1 - 422.38 *12 x 6 D1012-6 1 8 383.17 *12 x 6 D3012-6 1 - 461.16 *12 x 8 D1012-8 1 8 438.27 *12 x 8 D3012-8 1 - 547.68 *12 x 10 D1012-10 1 7 522.95 *12 x 10 D3012-10 1 - 613.32 *12 x 12 D1012 1 6 642.67 *12 x 12 D3012 1 - 777.72 14 x 4 D1014-4 1 - 761.93 14 x 4 D3014-4 1 - 903.67 14 x 6 D1014-6 1 - 868.01 14 x 6 D3014-6 1 - 986.29 14 x 8 D1014-8 1 - 914.47 14 x 8 D3014-8 1 - 1,032.54 14 x 10 D1014-10 1 - 1,049.86 14 x 10 D3014-10 1 - 1,134.54 14 x 12 D1014-12 1 - 1,253.47 14 x 12 D3014-12 1 - 1,371.05 14 x 14 D1014 1 - 1,372.49 14 x 14 D3014 1 - 1,491.06 16 x 4 D1016-4 1 - 937.53 16 x 4 D3016-4 1 - 1,055.86 16 x 6 D1016-6 1 - 1,047.10 16 x 6 D3016-6 1 - 1,162.01 16 x 8 D1016-8 1 - 1,115.45 16 x 8 D3016-8 1 - 1,233.04 16 x 10 D1016-10 1 - 1,318.84 16 x 10 D3016-10 1 - 1,437.05 16 x 12 D1016-12 1 - 1,367.14 16 x 12 D3016-12 1 - 1,485.42 16 x 14 D1016-14 1 - 1,474.06 16 x 14 D3016-14 1 - 1,592.19 16 x 16 D1016 1 - 1,599.50 16 x 16 D3016 1 - 1,716.65 18 x 4 D1018-4 1 - 1,275.19 18 x 4 D3018-4 1 - 1,392.27 18 x 6 D1018-6 1 - 1,362.74 18 x 6 D3018-6 1 - 1,450.85 18 x 8 D1018-8 1 - 1,424.51 18 x 8 D3018-8 1 - 1,509.40 18 x 10 D1018-10 1 - 1,475.61 18 x 10 D3018-10 1 - 1,626.39 18 x 12 D1018-12 1 - 1,487.17 18 x 12 D3018-12 1 - 1,684.78 18 x 14 D1018-14 1 - 1,533.84 18 x 14 D3018-14 1 - 1,743.34 18 x 16 D1018-16 1 - 1,595.18 18 x 16 D3018-16 1 - 1,895.44 18 x 18 D1018 1 - 2,038.97 18 x 18 D3018 1 - 2,140.92 20 x 4 D1020-4 1 - 1,530.36 20 x 4 D3020-4 1 - 1,670.70 20 x 6 D1020-6 1 - 1,635.63 20 x 6 D3020-6 1 - 1,741.04 20 x 8 D1020-8 1 - 1,705.92 20 x 8 D3020-8 1 - 1,811.27 20 x 10 D1020-10 1 - 1,776.13 20 x 10 D3020-10 1 - 1,951.54 20 x 12 D1020-12 1 - 1,790.12 20 x 12 D3020-12 1 - 2,021.80 20 x 14 D1020-14 1 - 1,846.20 20 x 14 D3020-14 1 - 2,166.70 20 x 16 D1020-16 1 - 1,914.04 20 x 16 D3020-16 1 - 2,274.54 20 x 18 D1020-18 1 - 2,446.74 20 x 18 D3020-18 1 - 2,569.08 20 x 20 D1020 1 - 2,531.89 20 x 20 D3020 1 - 2,658.49 24 x 4 D1024-4 1 - 2,784.54 24 x 4 D3024-4 1 - 2,923.77 24 x 6 D1024-6 1 - 3,257.11 24 x 6 D3024-6 1 - 3,419.97 24 x 8 D1024-8 1 - 3,524.61 24 x 8 D3024-8 1 - 3,700.84 24 x 10 D1024-10 1 - 3,564.64 24 x 10 D3024-10 1 - 3,742.87 24 x 12 D1024-12 1 - 3,643.06 24 x 12 D3024-12 1 - 3,825.21 24 x 14 D1024-14 1 - 3,670.93 24 x 14 D3024-14 1 - 3,854.48 24 x 16 D1024-16 1 - 3,677.79 24 x 16 D3024-16 1 - 3,861.68 24 x 18 D1024-18 1 - 5,064.35 24 x 18 D3024-18 1 - 5,317.57 24 x 20 D1024-20 1 - 5,773.40 24 x 20 D3024-20 1 - 6,062.07 24 x 24 D1024 1 - 6,224.66 24 x 24 D3024 1 - 6,535.89

Test Tee with Countersunk Plug HxHxFIPT Test Tee with Raised Plug HxHxFIPT *4 x 4 D12804 8 - 42.70 *4 x 4 D12904 7 - 43.36 *6 x 4 D12806-4 1 12 146.50 *6 x 4 D12906-4 1 12 144.42 *6 x 6 D12806 1 15 214.66 *6 x 6 D12906 1 24 206.37 8 x 4 D12808-4 4 - 162.67 8 x 4 D12908-4 1 17 160.59 *8 x 6 D12808-6 1 13 244.24 *8 x 6 D12908-6 1 26 235.93 *8 x 8 D12808 1 10 540.75 *8 x 8 D12908 1 10 540.79 *10 x 4 D12810-4 1 12 421.62 *10 x 4 D12910-4 1 12 421.77 *10 x 6 D12810-6 1 9 572.38 *10 x 6 D12910-6 1 9 572.34 *10 x 8 D12810-8 1 8 891.19 *10 x 8 D12910-8 1 8 891.24 *10 x 10 D12810 1 11 909.18 *10 x 10 D12910 1 11 909.18 *12 x 4 D12812-4 1 8 545.38 *12 x 4 D12912-4 1 8 545.54 *12 x 6 D12812-6 1 7 700.63 *12 x 6 D12912-6 1 7 700.52 *12 x 8 D12812-8 1 6 976.40 *12 x 8 D12912-8 1 6 976.45 *12 x 10 D12812-10 1 8 1,021.82 *12 x 10 D12912-10 1 8 1,021.82 *12 x 12 D12812 1 7 1,079.63 *12 x 12 D12912 1 7 1,079.63 14 x 4 D12814-4 1 - 971.89 14 x 4 D12914-4 1 - 970.20 14 x 6 D12814-6 1 - 1,182.31 14 x 6 D12914-6 1 - 1,176.27 14 x 8 D12814-8 1 - 1,547.95 14 x 8 D12914-8 1 - 1,533.86 16 x 4 D12816-4 1 - 1,079.52 16 x 4 D12916-4 1 - 1,077.83 16 x 6 D12816-6 1 - 1,313.56 16 x 6 D12916-6 1 - 1,307.52

16 x 8 D12816-8 1 - 1,686.83 16 x 8 D12916-8 1 - 1,672.74 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC

Page D1 †Denotes Assembled from Molded Components Specifications: ASTM D2665, F1866, CSA B181.2 Additional Sizes Available upon Request Non-Stock items are non-cancelable, non-returnable

Solvent Weld DWV Fittings D



www.StanRoberts.com Company Logo Solvent Weld DWV Fittings D

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Test Tee without Plug HxHxFIPT Sanitary Tee (T-Y) HxHxH *4 x 4 D1104 8 - 48.03 *4 x 4 D156 6 - 46.72 *6 x 4 D1106-4 3 - 124.80 *6 x 4 D157-4 5 - 136.91 *6 x 6 D1106 4 25 137.34 *6 x 6 D157 2 - 141.58 8 x 4 D1108-4 3 - 134.14 *8 x 4 D158-4 2 - 250.01 *8 x 6 D1108-6 2 26 173.32 *8 x 6 D158-6 2 - 308.67 *8 x 8 D1108 2 - 443.36 *8 x 8 D158 2 - 388.92 *10 x 4 D11010-4 1 12 413.57 10 x 4 D1510-4 1 - 397.90 *10 x 6 D11010-6 1 11 542.43 10 x 6 D1510-6 1 - 486.96 *10 x 8 D11010-8 1 11 737.79 10 x 8 D1510-8 1 - 657.26 *10 x 10 D11010 1 11 749.42 10 x 10 D1510 1 - 895.64 *12 x 4 D11012-4 1 8 537.31 12 x 4 D1512-4 1 - 505.54 *12 x 6 D11012-6 1 8 670.65 12 x 6 D1512-6 1 - 525.18 *12 x 8 D11012-8 1 8 827.77 12 x 8 D1512-8 1 - 728.96 *12 x 10 D11012-10 1 8 833.74 12 x 10 D1512-10 1 - 815.72 *12 x 12 D11012 1 7 742.70 12 x 12 D1512 1 - 972.15 14 x 4 D11014-4 1 - 955.66 14 x 4 D1514-4 1 - 873.14 14 x 6 D11014-6 1 - 1,145.39 14 x 6 D1514-6 1 - 1,100.62 14 x 8 D11014-8 1 - 1,432.53 14 x 8 D1514-8 1 - 1,239.55 16 x 4 D11016-4 1 - 1,063.29 14 x 10 D1514-10 1 - 1,338.76 16 x 6 D11016-6 1 - 1,276.64 14 x 12 D1514-12 1 - 1,754.94 16 x 8 D11016-8 1 - 1,571.41 14 x 14 D1514 1 - 1,938.38 Tee Cross HxHxHxH 16 x 4 D1516-4 1 - 1,116.04 4 x 4 D1794 1 - 75.34 16 x 6 D1516-6 1 - 1,181.25 6 x 4 D1796-4 1 - 149.76 16 x 8 D1516-8 1 - 1,437.05 6 x 6 D1796 1 - 169.22 16 x 10 D1516-10 1 - 1,674.16 8 x 4 D1798-4 1 - 191.77 16 x 12 D1516-12 1 - 1,730.51 8 x 6 D1798-6 1 - 220.67 16 x 14 D1516-14 1 - 1,854.90 8 x 8 D1798 1 - 290.21 16 x 16 D1516 1 - 1,999.90 10 x 4 D17910-4 1 - 390.84 18 x 4 D1518-4 1 - 1,453.19 10 x 6 D17910-6 1 - 427.53 18 x 6 D1518-6 1 - 1,532.15 10 x 8 D17910-8 1 - 558.62 18 x 8 D1518-8 1 - 1,611.15 10 x 10 D17910 1 - 665.09 20 x 4 D1520-4 1 - 1,743.85 12 x 4 D17912-4 1 - 453.03 20 x 6 D1520-6 1 - 1,838.57 12 x 6 D17912-6 1 - 536.44 20 x 8 D1520-8 1 - 1,933.37 12 x 8 D17912-8 1 - 635.49 24 x 4 D1524-4 1 - 3,191.00 12 x 10 D17912-10 1 - 784.43 24 x 6 D1524-6 1 - 3,375.54 12 x 12 D17912 1 - 996.14 24 x 8 D1524-8 1 - 3,965.19 14 x 4 D17914-4 1 - 1,072.05 14 x 6 D17914-6 1 - 1,215.21 Combo Wye & 1/8 Bend HxHxH (2 Piece) 14 x 8 D17914-8 1 - 1,354.87 †4 x 4 D1654 4 - 81.14 14 x 10 D17914-10 1 - 1,574.79 †6 x 4 D1656-4 1 20 234.77 14 x 12 D17914-12 1 - 1,942.88 †6 x 6 D1656 1 16 252.51 14 x 14 D17914 1 - 2,195.98 †8 x 4 D1658-4 1 14 212.07 16 x 4 D17916-4 1 - 1,282.88 †8 x 6 D1658-6 1 10 307.61 16 x 6 D17916-6 1 - 1,468.58 †8 x 8 D1658 1 10 404.26 16 x 8 D17916-8 1 - 1,750.41 †10 x 4 D16510-4 1 10 357.49 16 x 10 D17916-10 1 - 1,997.04 †10 x 6 D16510-6 1 8 459.54 16 x 12 D17916-12 1 - 2,119.07 †10 x 8 D16510-8 1 8 599.29 16 x 14 D17916-14 1 - 2,358.50 †10 x 10 D16510 1 6 1,017.61 16 x 16 D17916 1 - 2,639.18 †12 x 4 D16512-4 1 8 555.97 18 x 4 D17918-4 1 - 1,721.51 †12 x 6 D16512-6 1 6 577.52 18 x 6 D17918-6 1 - 1,907.84 †12 x 8 D16512-8 1 6 728.37 18 x 8 D17918-8 1 - 2,065.54 †12 x 10 D16512-10 1 4 1,043.38 18 x 10 D17918-10 1 - 2,213.42 †12 x 12 D16512 1 3 1,199.92 18 x 12 D17918-12 1 - 2,305.11 14 x 4 D16514-4 1 11 950.79 18 x 14 D17918-14 1 - 2,454.14 14 x 6 D16514-6 1 9 1,092.08 18 x 16 D17918-16 1 - 2,632.05 14 x 8 D16514-8 1 6 1,213.23 18 x 18 D17918 1 - 3,466.25 14 x 10 D16514-10 1 4 1,415.27 20 x 4 D17920-4 1 - 2,065.99 14 x 12 D16514-12 1 3 1,793.25 20 x 6 D17920-6 1 - 2,289.88 14 x 14 D16514 1 3 2,233.55 20 x 8 D17920-8 1 - 2,473.58 16 x 4 D16516-4 1 5 1,238.27 20 x 10 D17920-10 1 - 2,664.20 16 x 6 D16516-6 1 5 1,267.80 20 x 12 D17920-12 1 - 2,774.69 16 x 8 D16516-8 1 4 1,385.20 20 x 14 D17920-14 1 - 2,953.92 16 x 10 D16516-10 1 3 1,717.78 20 x 16 D17920-16 1 - 3,158.17 16 x 12 D16516-12 1 3 1,907.62 20 x 18 D17920-18 1 - 4,159.46 16 x 14 D16516-14 1 - 2,334.68 20 x 20 D17920 1 - 4,430.81 16 x 16 D16516 1 - 2,552.58 24 x 4 D17924-4 1 - 3,759.13 18 x 4 D16518-4 1 - 1,598.09 24 x 6 D17924-6 1 - 4,559.95 18 x 6 D16518-6 1 - 1,684.95 24 x 8 D17924-8 1 - 5,110.69 18 x 8 D16518-8 1 - 1,771.72 24 x 10 D17924-10 1 - 5,346.96 20 x 4 D16520-4 1 - 1,917.66 24 x 12 D17924-12 1 - 5,646.74 20 x 6 D16520-6 1 - 2,021.87 24 x 14 D17924-14 1 - 5,873.49 20 x 8 D16520-8 1 - 2,126.12 24 x 16 D17924-16 1 - 6,068.35 24 x 4 D16524-4 1 - 3,509.20 24 x 18 D17924-18 1 - 8,609.40 24 x 6 D16524-6 1 - 3,712.10 24 x 20 D17924-20 1 - 10,103.45 24 x 8 D16524-8 1 - 3,835.97 24 x 24 D17924 1 - 11,204.39

*Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC




Stan Roberts & Associates, Inc Houston - 800-392-6583 • Dallas - 800-462-1195Company Logo Solvent Weld DWV Fittings D

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Double Sanitary Tee (T-Y) HxHxHxH Double 45 Degree Wye HxHxHxH 4 x 4 D1534 1 - 157.99 4 x 4 D364-4 1 - 108.61 6 x 4 D1536-4 1 - 238.34 *6 x 4 D366-4 2 - 185.73 6 x 6 D1536 1 - 404.10 *6 x 6 D366-6 2 - 189.76 8 x 4 D1538-4 1 - 244.95 8 x 4 D368-4 1 - 195.57 8 x 6 D1538-6 1 - 468.67 8 x 6 D368-6 1 - 257.09 8 x 8 D1538 1 - 691.42 8 x 8 D368-8 1 - 330.04 10 x 4 D15310-4 1 - 417.54 10 x 4 D3610-4 1 - 368.16 10 x 6 D15310-6 1 - 706.83 10 x 6 D3610-6 1 - 495.25 10 x 8 D15310-8 1 - 968.35 10 x 8 D3610-8 1 - 606.97 10 x 10 D15312-4 1 - 1,279.60 10 x 10 D3610 1 - 718.14 12 x 4 D15312-4 1 - 619.59 12 x 4 D3612-4 1 - 570.21 12 x 6 D15312-6 1 - 857.20 12 x 6 D3612-6 1 - 645.62 12 x 8 D15312-8 1 - 1,155.52 12 x 8 D3612-8 1 - 794.14 12 x 10 D15312-10 1 - 1,489.27 12 x 10 D3612-10 1 - 927.81 12 x 12 D15312 1 - 2,049.87 12 x 12 D3612 1 - 1,205.47 14 x 4 D15314-4 1 - 1,269.34 14 x 4 D3614-4 1 - 1,219.96 14 x 6 D15314-6 1 - 1,592.39 14 x 6 D3614-6 1 - 1,380.81 14 x 8 D15314-8 1 - 1,858.56 14 x 8 D3614-8 1 - 1,497.18 14 x 10 D15314-10 1 - 2,263.27 14 x 10 D3614-10 1 - 1,701.81 14 x 12 D15314-12 1 - 2,969.53 14 x 12 D3614-12 1 - 2,125.13 14 x 14 D15314 1 - 3,874.68 14 x 14 D3614 1 - 2,385.70 16 x 4 D15316-4 1 - 1,474.79 16 x 4 D3616-4 1 - 1,425.41 16 x 6 D15316-6 1 - 1,838.39 16 x 6 D3616-6 1 - 1,626.81 16 x 8 D15316-8 1 - 2,147.74 16 x 8 D3616-8 1 - 1,786.36 16 x 10 D15316-10 1 - 2,717.04 16 x 10 D3616-10 1 - 2,155.58 16 x 12 D15316-12 1 - 3,146.80 16 x 12 D3616-12 1 - 2,302.40 16 x 14 D15316-14 1 - 4,036.48 16 x 14 D3616-14 1 - 2,547.50 16 x 16 D15316 1 - 4,471.33 16 x 16 D3616 1 - 2,832.47 18 x 4 D15318-4 1 - 1,928.85 18 x 4 D3618-4 1 - 1,879.57 18 x 6 D15318-6 1 - 2,242.77 18 x 6 D3618-6 1 - 2,031.19 18 x 8 D15318-8 1 - 2,539.35 18 x 8 D3618-8 1 - 2,188.63 18 x 10 D15318-10 1 - 3,001.06 18 x 10 D3618-10 1 - 2,439.59 18 x 12 D15318-12 1 - 3,455.81 18 x 12 D3618-12 1 - 2,611.41 18 x 14 D15318-14 1 - 4,278.32 18 x 14 D3618-14 1 - 2,789.34 18 x 16 D15318-16 1 - 4,769.34 18 x 16 D3618-16 1 - 3,127.48 18 x 18 D15318 1 - 5,840.76 18 x 18 D3618 1 - 3,639.56 20 x 4 D15320-4 1 - 2,632.21 20 x 4 D3620-4 1 - 2,254.50 20 x 6 D15320-6 1 - 2,649.04 20 x 6 D3620-6 1 - 2,437.46 20 x 8 D15320-8 1 - 2,987.72 20 x 8 D3620-8 1 - 2,626.34 20 x 10 D15320-10 1 - 3,488.77 20 x 10 D3620-10 1 - 2,927.31 20 x 12 D15320-12 1 - 3,978.19 20 x 12 D3620-12 1 - 3,133.79 20 x 14 D15320-14 1 - 4,955.70 20 x 14 D3620-14 1 - 3,466.72 20 x 16 D15320-16 1 - 5,394.85 20 x 16 D3620-16 1 - 3,752.99 20 x 18 D15320-18 1 - 6,282.76 20 x 18 D3620-18 1 - 4,081.56 20 x 20 D15320 1 - 7,727.69 20 x 20 D3620 1 - 4,330.53 24 x 4 D15324-4 1 - 2,910.13 24 x 4 D3624-4 1 - 3,755.61 24 x 6 D15324-6 1 - 4,771.53 24 x 6 D3624-6 1 - 4,559.95 24 x 8 D15324-8 1 - 5,472.07 24 x 8 D3624-8 1 - 5,110.69 24 x 10 D15324-10 1 - 5,908.42 24 x 10 D3624-10 1 - 5,346.96 24 x 12 D15324-12 1 - 6,491.14 24 x 12 D3624-12 1 - 5,646.74 24 x 14 D15324-14 1 - 7,362.47 24 x 14 D3624-14 1 - 5,873.49 24 x 16 D15324-16 1 - 7,709.74 24 x 16 D3624-16 1 - 6,067.88 24 x 18 D15324-18 1 - 11,073.14 24 x 18 D3624-18 1 - 8,871.94 24 x 20 D15324-20 1 - 13,438.94 24 x 20 D3624-20 1 - 10,044.28 24 x 24 D15324 1 - 16,632.40 24 x 24 D3624 1 - 11,764.60 Long Radius Sanitary Tee HxHxH 2-Way Cleanout HxHxH *4 x 4 D1644 4 - 55.07 *4 x 4 D1004 6 - 57.50 *6 x 6 D1006 3 - 480.42 1/4 Bend (90) Vent HxH 1/4 Bend (90) Vent SxH *4 D204 8 - 34.91 *4 D224 1 - 36.66 *6 D206 4 - 151.73 *6 D226 1 - 159.32 *8 D208 2 - 158.16 *8 D228 2 - 166.07 *10 D2010 1 9 316.45 *10 D2210 1 9 348.89 *12 D2012 1 6 487.31 *12 D2212 1 6 518.29 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC






Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

1/4 Bend (90) HxH Long Sweep 1/4 Bend (90) SxH Long Sweep *4 D256 10 - 24.98 *4 D274 10 - 26.39 *6 D257 4 - 87.72 *6 D277 4 - 122.16 *8 D258 2 - 177.61 *8 D278 2 - 243.35 †10 D2510 1 8 546.23 †10 D2710 1 8 546.46 †12 D2512 1 6 824.07 †12 D2712 1 6 829.40 14 D2514 1 - 865.27 14 D2714 1 - 845.75 16 D2516 1 - 1,184.25 16 D2716 1 - 1,170.14 18 D2518 1 - 1,465.79 18 D2718 1 - 1,452.11 20 D2520 1 - 2,129.42 20 D2720 1 - 2,129.42 24 D2524 1 - 2,949.09 24 D2724 1 - 2,949.09 1/6 Bend (60) HxH 1/6 Bend (60) SxH 4 D1354.60 1 - 55.22 4 D1344.60 1 - 56.60 6 D1356.60 1 - 111.02 6 D1346.60 1 - 113.80 8 D1358.60 1 - 184.03 8 D1348.60 1 - 188.63 10 D13510.60 1 - 381.62 10 D13410.60 1 - 391.16 12 D13512.60 1 - 518.39 12 D13412.60 1 - 531.35 14 D13514.60 1 - 774.40 14 D13414.60 1 - 793.76 16 D13516.60 1 - 952.19 16 D13416.60 1 - 976.00 18 D13518.60 1 - 1,759.85 18 D13418.60 1 - 1,803.85 20 D13520.60 1 - 2,507.86 20 D13420.60 1 - 2,570.76 24 D13524.60 1 - 3,134.36 24 D13424.60 1 - 3,212.72 1/8 Bend (45) HxH 1/8 Bend (45) SxH *4 D504 8 - 19.85 *4 D404 8 - 17.19 *6 D506 5 - 80.25 *6 D406 5 - 98.29 *8 D508 2 - 159.50 *8 D408 2 - 173.19 *10 D5010 1 12 265.50 *10 D4010 1 12 265.73 *12 D5012 1 8 401.87 *12 D4012 1 8 407.20 14 D5014 1 - 745.17 14 D4014 1 - 727.49 16 D5016 1 - 805.93 16 D4016 1 - 805.93 18 D5018 1 - 1,097.57 18 D4018 1 - 1,085.60 20 D5020 1 - 1,683.58 20 D4020 1 - 1,683.58 24 D5024 1 - 2,418.90 24 D4024 1 - 2,418.90 1/12 Bend (30) HxH 1/12 Bend (30) SxH 4 D1354.30 1 - 54.40 4 D1344.30 1 - 55.76 6 D1356.30 1 - 109.38 6 D1346.30 1 - 112.12 8 D1358.30 1 - 181.31 8 D1348.30 1 - 185.84 10 D13510.30 1 - 375.98 10 D13410.30 1 - 385.38 12 D13512.30 1 - 510.73 12 D13412.30 1 - 523.51 14 D13514.30 1 - 671.17 14 D13414.30 1 - 767.70 16 D13516.30 1 - 830.29 16 D13416.30 1 - 851.06 18 D13518.30 1 - 990.82 18 D13418.30 1 - 1,015.60 20 D13520.30 1 - 1,791.92 20 D13420.30 1 - 1,836.72 24 D13524.30 1 - 2,580.08 24 D13424.30 1 - 2,644.58 1/16 Bend (22.5) HxH 1/16 Bend (22.5) SxH *4 D1704 8 - 18.26 *4 D1714 8 - 26.08 *6 D1706 6 - 106.17 *6 D1716 6 - 106.12 *8 D1708 3 - 165.50 *8 D1718 3 - 185.38 *10 D17010 1 24 254.39 *10 D17110 1 24 275.79 *12 D17012 1 8 407.03 *12 D17112 1 8 380.67 14 D17014 1 - 651.48 14 D17114 1 - 745.17 16 D17016 1 - 805.93 16 D17116 1 - 805.93 18 D17018 1 - 961.75 18 D17118 1 - 961.75 20 D17020 1 - 1,739.35 20 D17120 1 - 1,739.35 24 D17024 1 - 2,504.38 24 D17124 1 - 2,504.38 1/32 Bend (11.25) HxH 1/32 Bend (11.25) SxH 4 D1934 1 - 53.60 4 D1834 1 - 54.94 6 D1936 1 - 107.76 6 D1836 1 - 110.45 8 D1938 1 - 178.63 8 D1838 1 - 188.16 10 D19310 1 - 370.44 10 D18310 1 - 379.70 12 D19312 1 - 503.18 12 D18312 1 - 515.76 14 D19314 1 - 661.25 14 D18314 1 - 756.35 16 D19316 1 - 818.02 16 D18316 1 - 838.48 18 D19318 1 - 976.18 18 D18318 1 - 1,000.59 20 D19320 1 - 1,765.44 20 D18320 1 - 1,809.58 24 D19324 1 - 2,541.95 24 D18324 1 - 2,605.50 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC





Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Cap (H) Spigot Plug (S) *4 D1604 27 - 22.38 *4 T1164 4 - 32.64 *6 D1606 8 - 56.44 *6 T1166 6 - 102.35 *8 D1608 6 - 95.57 *8 T1168 1 - 116.02 *10 D16010 2 - 170.43 *10 D11610 2 36 169.27 *12 D16012 2 - 215.60 *12 D11612 2 27 212.23 14 D16014 1 - 359.73 14 D11614 1 - 409.52 16 D16016 1 - 460.51 16 D11616 1 - 513.74 18 D16018 1 - 532.61 18 D11618 1 - 592.09 20 D16020 1 - 1,168.79 20 D11620 1 - 958.84 24 D16024 1 - 1,334.03 24 D11624 1 - 1,441.76 Drain Grate (S) Male Adapter HxMPT *4 D911 25 - 21.90 *4 x 4 D1304 4 - 21.70 *6 D916 10 - 47.40 *6 x 6 D1306 8 - 140.59 Stop Coupling HxH Repair Coupling HxH *4 D604 12 - 10.79 *4 D624 12 - 25.03 *6 D606 10 - 35.14 *6 D626 10 - 51.12 *8 D608 3 - 66.91 *8 D628 3 - 83.64 *10 D6010 2 24 116.78 *10 D6210 2 24 145.98 *12 D6012 1 18 198.90 *12 D6212 1 18 248.63 14 D6014 1 - 306.62 14 D6214 1 - 383.28 16 D6016 1 - 342.01 16 D6216 1 - 427.51 18 D6018 1 - 560.75 18 D6218 1 - 700.94 20 D6020 1 - 842.41 20 D6220 1 - 1,053.01 24 D6024 1 - 947.76 24 D6224 1 - 1,184.70 Concentric Reducer Coupling HxH Concentric Reducer Bushing SxH *6 x 4 D606-4 8 - 66.75 *6 x 4 D1216 10 - 63.57 *8 x 4 D608-4 5 - 115.76 *8 x 4 D1217 5 - 109.68 *8 x 6 D608-6 6 - 125.08 *8 x 6 D1218 4 - 119.12 *10 x 4 D6010-4 2 - 187.35 *10 x 4 D1210-4 2 - 178.45 *10 x 6 D6010-6 2 - 193.27 *10 x 6 D1210-6 2 - 184.07 *10 x 8 D6010-8 2 - 199.18 *10 x 8 D1210-8 2 - 189.69 *12 x 4 D6012-4 2 - 283.85 *12 x 4 D1212-4 2 - 270.33 *12 x 6 D6012-6 2 - 331.91 *12 x 6 D1212-6 2 - 316.11 *12 x 8 D6012-8 2 - 348.51 *12 x 8 D1212-8 2 - 331.91 *12 x 10 D6012-10 2 - 365.93 *12 x 10 D1212-10 2 - 348.51 14 x 4 D6014-4 1 - 428.51 14 x 4 D1214-4 1 - 408.10 14 x 6 D6014-6 1 - 433.67 14 x 6 D1214-6 1 - 413.02 14 x 8 D6014-8 1 - 489.47 14 x 8 D1214-8 1 - 466.16 14 x 10 D6014-10 1 - 618.69 14 x 10 D1214-10 1 - 589.23 14 x 12 D6014-12 1 - 649.63 14 x 12 D1214-12 1 - 618.70 16 x 4 D6016-4 1 - 511.09 16 x 4 D1216-4 1 - 486.75 16 x 6 D6016-6 1 - 526.28 16 x 6 D1216-6 1 - 501.22 16 x 8 D6016-8 1 - 607.28 16 x 8 D1216-8 1 - 578.36 16 x 10 D6016-10 1 - 682.01 16 x 10 D1216-10 1 - 649.53 16 x 12 D6016-12 1 - 689.40 16 x 12 D1216-12 1 - 656.57 16 x 14 D6016-14 1 - 715.10 16 x 14 D1216-14 1 - 681.05 18 x 4 D6018-4 1 - 871.68 18 x 4 D1218-4 1 - 830.17 18 x 6 D6018-6 1 - 918.45 18 x 6 D1218-6 1 - 874.71 18 x 8 D6018-8 1 - 989.22 18 x 8 D1218-8 1 - 942.11 18 x 10 D6018-10 1 - 1,058.85 18 x 10 D1218-10 1 - 1,008.43 18 x 12 D6018-12 1 - 1,076.37 18 x 12 D1218-12 1 - 1,025.11 18 x 14 D6018-14 1 - 1,170.07 18 x 14 D1218-14 1 - 1,114.35 18 x 16 D6018-16 1 - 1,228.57 18 x 16 D1218-16 1 - 1,170.07 20 x 4 D6020-4 1 - 1,046.10 20 x 4 D1220-4 1 - 996.29 20 x 6 D6020-6 1 - 1,102.09 20 x 6 D1220-6 1 - 1,049.61 20 x 8 D6020-8 1 - 1,131.97 20 x 8 D1220-8 1 - 1,078.07 20 x 10 D6020-10 1 - 1,158.31 20 x 10 D1220-10 1 - 1,103.15 20 x 12 D6020-12 1 - 1,174.09 20 x 12 D1220-12 1 - 1,118.18 20 x 14 D6020-14 1 - 1,249.41 20 x 14 D1220-14 1 - 1,189.91 20 x 16 D6020-16 1 - 1,265.98 20 x 16 D1220-16 1 - 1,205.69 20 x 18 D6020-18 1 - 1,352.09 20 x 18 D1220-18 1 - 1,287.70 24 x 4 D6024-4 1 - 1,911.75 24 x 4 D1224-4 1 - 1,820.71 24 x 6 D6024-6 1 - 1,924.30 24 x 6 D1224-6 1 - 1,832.67 24 x 8 D6024-8 1 - 1,946.19 24 x 8 D1224-8 1 - 1,853.51 24 x 10 D6024-10 1 - 1,974.44 24 x 10 D1224-10 1 - 1,880.42 24 x 12 D6024-12 1 - 2,005.86 24 x 12 D1224-12 1 - 1,910.34 24 x 14 D6024-14 1 - 2,074.72 24 x 14 D1224-14 1 - 1,975.92 24 x 16 D6024-16 1 - 2,106.04 24 x 16 D1224-16 1 - 2,005.75 24 x 18 D6024-18 1 - 2,178.19 24 x 18 D1224-18 1 - 2,074.47 24 x 20 D6024-20 1 - 2,547.84 24 x 20 D1224-20 1 - 2,426.51 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC






Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Eccentric Reducer Coupling HxH Eccentric Reducer Bushing SxH 6 x 4 D6106-4 1 - 70.42 6 x 4 D1306-4 1 - 74.98 8 x 4 D6108-4 1 - 121.49 8 x 4 D1308-4 1 - 129.74 8 x 6 D6108-6 1 - 131.96 8 x 6 D1308-6 1 - 132.86 10 x 4 D6110-4 1 - 197.65 10 x 4 D13010-4 1 - 188.26 10 x 6 D6110-6 1 - 298.45 10 x 6 D13010-6 1 - 234.65 10 x 8 D6110-8 1 - 210.13 10 x 8 D13010-8 1 - 260.10 12 x 4 D6112-4 1 - 299.46 12 x 4 D13012-4 1 - 285.20 12 x 6 D6112-6 1 - 350.17 12 x 6 D13012-6 1 - 349.08 12 x 8 D6112-8 1 - 367.68 12 x 8 D13012-8 1 - 359.20 12 x 10 D6112-10 1 - 386.06 12 x 10 D13012-10 1 - 367.68 14 x 4 D6114-4 1 - 452.08 14 x 4 D13014-4 1 - 430.55 14 x 6 D6114-6 1 - 457.52 14 x 6 D13014-6 1 - 435.74 14 x 8 D6114-8 1 - 516.39 14 x 8 D13014-8 1 - 491.80 14 x 10 D6114-10 1 - 652.72 14 x 10 D13014-10 1 - 621.64 14 x 12 D6114-12 1 - 685.36 14 x 12 D13014-12 1 - 652.73 16 x 4 D6116-4 1 - 539.20 16 x 4 D13016-4 1 - 513.52 16 x 6 D6116-6 1 - 555.23 16 x 6 D13016-6 1 - 528.79 16 x 8 D6116-8 1 - 640.68 16 x 8 D13016-8 1 - 610.17 16 x 10 D6116-10 1 - 719.52 16 x 10 D13016-10 1 - 685.25 16 x 12 D6116-12 1 - 727.32 16 x 12 D13016-12 1 - 692.68 16 x 14 D6116-14 1 - 754.43 16 x 14 D13016-14 1 - 718.51 18 x 4 D6118-4 1 - 919.62 18 x 4 D13018-4 1 - 875.83 18 x 6 D6118-6 1 - 968.96 18 x 6 D13018-6 1 - 922.82 18 x 8 D6118-8 1 - 1,043.63 18 x 8 D13018-8 1 - 993.93 18 x 10 D6118-10 1 - 1,117.09 18 x 10 D13018-10 1 - 1,063.89 18 x 12 D6118-12 1 - 1,135.57 18 x 12 D13018-12 1 - 1,081.49 18 x 14 D6118-14 1 - 1,234.42 18 x 14 D13018-14 1 - 1,175.64 18 x 16 D6118-16 1 - 1,296.14 18 x 16 D13018-16 1 - 1,234.42 20 x 4 D6120-4 1 - 1,103.64 20 x 4 D13020-4 1 - 1,051.09 20 x 6 D6120-6 1 - 1,162.70 20 x 6 D13020-6 1 - 1,107.34 20 x 8 D6120-8 1 - 1,194.23 20 x 8 D13020-8 1 - 1,137.36 20 x 10 D6120-10 1 - 1,222.02 20 x 10 D13020-10 1 - 1,163.82 20 x 12 D6120-12 1 - 1,238.66 20 x 12 D13020-12 1 - 1,179.68 20 x 14 D6120-14 1 - 1,318.13 20 x 14 D13020-14 1 - 1,255.36 20 x 16 D6120-16 1 - 1,335.61 20 x 16 D13020-16 1 - 1,272.00 20 x 18 D6120-18 1 - 1,426.45 20 x 18 D13020-18 1 - 1,358.52 24 x 4 D6124-4 1 - 2,016.90 24 x 4 D13024-4 1 - 1,920.85 24 x 6 D6124-6 1 - 2,030.14 24 x 6 D13024-6 1 - 1,933.47 24 x 8 D6124-8 1 - 2,053.23 24 x 8 D13024-8 1 - 1,955.45 24 x 10 D6124-10 1 - 2,083.03 24 x 10 D13024-10 1 - 1,983.84 24 x 12 D6124-12 1 - 2,116.18 24 x 12 D13024-12 1 - 2,015.41 24 x 14 D6124-14 1 - 2,188.83 24 x 14 D13024-14 1 - 2,084.60 24 x 16 D6124-16 1 - 2,221.87 24 x 16 D13024-16 1 - 2,116.07 24 x 18 D6124-18 1 - 2,297.99 24 x 18 D13024-18 1 - 2,188.57 24 x 20 D6124-20 1 - 2,687.97 24 x 20 D13024-20 1 - 2,559.97 Expansion Joint Coupling HxH Flush Reducer Bushing SxH 2 x 2 D632 10 - 99.77 10 x 4 D12510-4 1 - 263.88 3 x 3 D633 9 - 122.94 10 x 6 D12510-6 1 - 271.13 4 x 4 D634 5 - 255.36 10 x 8 D12510-8 2 - 285.32 6 x 6 D636 1 - 539.20 12 x 4 D12512-4 1 - 372.98 Supplied in Grey PVC 12 x 6 D12512-6 1 - 382.31 12 x 8 D12512-8 1 - 391.87 12 x 10 D12512-10 1 - 401.67 DWV Adapter Coupling HxH (SDR35) DWV Adapter Bushing SxH (SDR35) Solvent Sewer Hub x Solvent DWV Hub Solvent (Short) Sewer Spigot x Solvent DWV Hub *4 x 3 P655 45 - 7.26 *3 x 1! P1202 15 - 15.13 *4 x 4 P657 15 - 10.47 *3 x 2 P1203 15 - 13.65 *6 x 4 P658 10 - 28.15 *4 x 1! P1204 8 - 14.05 *6 x 6 P659 12 - 35.91 *4 x 2 P1205 8 - 14.25 †8 x 8 P6508 1 - 109.64 *4 x 3 P1211 15 - 31.13 10 x 8 P6510-8 1 - 251.44 *4 x 4 P1213 20 - 19.94 10 x 10 P6510 2 - 267.29 *6 x 4 P1214 15 - 34.41 12 x12 P6512 1 - 393.48 *6 x 6 P1215 12 - 45.52 Gasketed DWV Adapter Coupling GxDWV G Gasketed DWV Adapter Bushing SxDWV G SDR26 Gasket Sewer Hub x Gasket DWV Hub SDR26 Chamfer Sewer Spigot x Gasket DWV Hub *4 x 4 H657 6 - 55.11 *4 x 4 H1213 6 - 51.04 *6 x 4 H658 4 - 73.93 *6 x 4 H1214 5 - 69.82 *6 x 6 H659 3 - 80.90 *6 x 6 H1215 4 - 76.76 8 x 8 H6508 1 - 193.14 8 x 8 H9208 1 - 188.31 10 x 10 H6510 1 - 267.29 10 x 10 H9210 1 - 260.62 12 x 12 H6512 1 - 393.49 12 x 12 H9212 1 - 383.65 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC





Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Gasketed DWV Adapter Coupling HxDWV G Gasketed DWV Adapter Bushing SxDWV G SDR26 Solvent Sewer Hub x Gasket DWV Hub SDR26 Solvent Sewer Spigot x Gasket DWV Hub *4 x 4 H954 6 - 49.11 *4 x 4 H924 6 - 51.04 *6 x 4 H956-4 4 - 62.96 *6 x 4 H926-4 4 - 69.82 *6 x 6 H956 4 - 74.87 *6 x 6 H926 4 - 76.76 8 x 8 H958 1 - 180.19 8 x 8 H928 1 - 188.31 10 x 10 H9510 1 - 306.74 10 x 10 H92210 1 - 260.62 12 x 12 H9512 1 - 448.87 12 x 12 H92212 1 - 383.65

DWV Adapter Bushing SxH (SDR35) DWV Adapter Bushing SxH (SDR26) Chamfer (Long) Sewer Spigot x Solvent DWV Hub Chamfer (Long) Sewer Spigot x Solvent DWV Hub *4 x 4 G944 8 - 19.98 4 x 4 H944 1 - 37.09 *6 x 4 G946-4 5 - 45.52 6 x 4 H946-4 1 - 56.83 *6 x 6 G946 4 - 57.44 6 x 6 H946 1 - 59.82 *8 x 8 G948 4 - 125.13 8 x 8 H948 1 - 140.77 10 x 10 L9410 1 - 213.83 10 x 10 H9410 1 - 240.56 12 x 12 L9412 1 - 314.79 12 x 12 H9412 1 - 354.14

DWV Adapter Sleeve DWV SxG DWV Adapter Sleeve DWV SxG Solvent DWV Spigot x SDR35 Gasket Sewer Hub Solvent DWV Spigot x SDR26 Gasket Sewer Hub *4 x 4 G1208 16 - 38.12 *4 x 4 H1208 4 - 40.03 *6 x 6 G1209 8 - 65.17 *6 x 6 H1209 4 - 76.61 8 x 8 L12008 1 - 159.34 8 x 8 H12008 1 - 199.18 10 x 10 L12010 1 - 264.52 10 x 10 H12010 1 - 267.29 12 x 12 L12012 1 - 374.06 12 x 12 H12012 1 - 393.49

DWV Adapter Sleeve DWV SxH Gasketed DWV Hub Adapter SxG Solvent DWV Spigot x SDR35 Solvent Sewer Hub Solvent DWV Spigot x Gasket DWV Hub *4 x 4 P1208 36 - 7.83 *4 x 4 D904 6 - 34.67 *6 x 6 P1209 20 - 33.75 *6 x 6 D906 4 - 72.13 8 x 8 P12008 1 - 108.09 *8 x 8 D908 4 - 119.47 10 x 10 P12010 1 - 143.90 10 x 10 D9010 1 - 308.12 12 x 12 P12012 1 - 228.47 12 x 12 D9012 1 - 450.89

Temporary Plug Polyethylene (S) Vertical Riser Adapter SxS *4 x 4 G1184 36 - 7.26 *4 x 4 T984 6 - 57.94 *6 x 6 G1186 40 - 10.76 *6 x 6 T986 4 - 102.57 *8 x 8 G1188 8 - 25.54 *8 x 8 T988 4 - 224.81

In-Line Backwater Valve HxH Terminal Backwater Valve H *4 x 4 D0104 1 - 116.68 4 D0204 1 - 188.97 *6 x 4 D0106 1 - 281.85 6 D0206 1 - 208.36 8 x 8 D0108 1 - 1,461.37 8 D0208 1 - 657.62 10 x 10 D0110 1 - 1,873.93 10 D0210 1 - 843.27 12 x 12 D0112 1 - 1,971.33 12 D0212 1 - 887.10

IntelliCap with 3M Marker IntelliDisc with 3M Marker *4 P1614-SN 14 - 69.00 *4 P1624-SN 20 - 57.50 *6 P1616-SN 10 - 86.25 *6 P1626-SN 10 - 71.88

Fit-Rite Adjustable Closet Flange Locator for 3M Marker *4 D1864 1 - 27.05 - P1634 1 - POR

Downspout Adapter (H) Flushmount Downspout Adapter (H) Downspout x Solvent DWV Hub Flushmount Downspout x Solvent DWV Hub *2x3 x 4 D1904 35 - 13.69 *4x6 x 6 D1928 4 - 75.29 *3x4 x 3 D1905 65 - 19.68 *3x4 x 4 D1906 60 - 21.61 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC






Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Threaded Plug - Raised Threaded Plug - Countersunk *4 D1154 36 - 7.04 *4 D1144 20 - 12.04 *6 D1156 20 - 23.38 *6 D1146 20 - 30.97 *8 D1158 9 - 93.83 *8 D1148 4 - 117.08 *10 D11510 2 - 159.77 *10 D11410 2 - 176.08 *12 D11512 2 - 238.79 *12 D11412 3 - 249.14 Female Adapter HxFIPT Fitting Cleanout SxFIPT *4 x 4 D1404 18 - 14.87 *4 x 4 D1504 18 - 19.11 *6 x 6 D1406 4 - 49.89 *6 x 6 D1506 5 - 51.19 *8 x 8 D1408 4 - 157.91 *8 x 8 D1508 4 - 178.07 *10 x 10 D14010 2 - 507.12 *10 x 10 D15010 2 - 473.12 *12 x 12 D14012 2 - 735.71 *12 x 12 D15012 2 - 687.29 Female Adapter with Countersunk Plug Fitting Cleanout with Countersunk Plug †4 x 4 D8404 10 - 31.51 †4 x 4 D8504 10 - 35.75 †6 x 6 D8406 4 - 109.80 †6 x 6 D8506 4 - 111.10 †8 x 8 D8408 4 - 292.58 †8 x 8 D8508 4 - 312.74 †10 x 10 D84010 2 - 749.88 †10 x 10 D85010 2 - 768.22 †12 x 12 D84012 2 - 1,082.25 †12 x 12 D85012 2 - 1,109.05 Female Adapter with Raised Plug Fitting Cleanout with Raised Plug †4 x 4 D9404 10 - 26.51 †4 x 4 D9504 10 - 30.75 †6 x 6 D9406 4 - 102.21 †6 x 6 D9506 4 - 103.51 †8 x 8 D9408 4 - 269.33 †8 x 8 D9508 4 - 289.49 †10 x 10 D94010 2 - 733.57 †10 x 10 D95010 2 - 751.91 †12 x 12 D94012 2 - 1,071.90 †12 x 12 D95012 2 - 1,098.70 Saddle Tee with SS Clamps Saddle Wye with SS Clamps Solvent Skirt x Solvent Inlet Solvent Skirt x Solvent Inlet 6 x 4 D2106-4 1 - 60.31 6 x 4 D2306-4 1 - 64.83 8 x 4 D2108-4 1 - 85.25 8 x 4 D2308-4 1 - 91.64 8 x 6 D2108-6 1 - 87.78 8 x 6 D2308-6 1 - 94.36 10 x 4 D2110-4 1 - 107.44 10 x 4 D2310-4 1 - 115.50 10 x 6 D2110-6 1 - 125.18 10 x 6 D2310-6 1 - 134.57 10 x 8 D2110-8 1 - 281.18 10 x 8 D2310-8 1 - 302.27 12 x 4 D2112-4 1 - 129.63 12 x 4 D2312-4 1 - 139.35 12 x 6 D2112-6 1 - 150.71 12 x 6 D2312-6 1 - 162.01 12 x 8 D2112-8 1 - 395.98 12 x 8 D2312-8 1 - 425.68 12 x 10 D2112-10 1 - 474.13 12 x 10 D2312-10 1 - 509.69 14 x 4 D2114-4 1 - 144.52 14 x 4 D2314-4 1 - 155.36 14 x 6 D2114-6 1 - 164.67 14 x 6 D2314-6 1 - 177.02 14 x 8 D2114-8 1 - 405.33 14 x 8 D2314-8 1 - 435.73 14 x 10 D2114-10 1 - 483.51 14 x 10 D2314-10 1 - 519.77 14 x 12 D2114-12 1 - 492.65 14 x 12 D2314-12 1 - 529.60 16 x 4 D2116-4 1 - 154.02 16 x 4 D2316-4 1 - 165.57 16 x 6 D2116-6 1 - 175.74 16 x 6 D2316-6 1 - 188.92 16 x 8 D2116-8 1 - 414.59 16 x 8 D2316-8 1 - 445.68 16 x 10 D2116-10 1 - 493.15 16 x 10 D2316-10 1 - 530.14 16 x 12 D2116-12 1 - 501.92 16 x 12 D2316-12 1 - 539.56 16 x 14 D2116-14 1 - 511.16 16 x 14 D2316-14 1 - 549.50 18 x 4 D2118-4 1 - 231.18 18 x 4 D2318-4 1 - 248.52 18 x 6 D2118-6 1 - 244.13 18 x 6 D2318-6 1 - 262.44 18 x 8 D2118-8 1 - 541.45 18 x 8 D2318-8 1 - 582.06 18 x 10 D2118-10 1 - 604.18 18 x 10 D2318-10 1 - 649.49 18 x 12 D2118-12 1 - 724.66 18 x 12 D2318-12 1 - 779.01 18 x 14 D2118-14 1 - 778.23 18 x 14 D2318-14 1 - 836.60 18 x 16 D2118-16 1 - 863.62 18 x 16 D2318-16 1 - 928.39 20 x 4 D2120-4 1 - 236.35 20 x 4 D2320-4 1 - 254.08 20 x 6 D2120-6 1 - 257.81 20 x 6 D2320-6 1 - 277.15 20 x 8 D2120-8 1 - 543.76 20 x 8 D2320-8 1 - 557.35 20 x 10 D2120-10 1 - 606.53 20 x 10 D2320-10 1 - 652.02 20 x 12 D2120-12 1 - 726.96 20 x 12 D2320-12 1 - 781.48 20 x 14 D2120-14 1 - 780.52 20 x 14 D2320-14 1 - 839.06 20 x 16 D2120-16 1 - 863.62 20 x 16 D2320-16 1 - 928.39 20 x 18 D2120-18 1 - 912.56 20 x 18 D2320-18 1 - 981.01 24 x 4 D2124-4 1 - 240.87 24 x 4 D2324-4 1 - 258.94 24 x 6 D2124-6 1 - 262.32 24 x 6 D2324-6 1 - 281.99 24 x 8 D2124-8 1 - 546.07 24 x 8 D2324-8 1 - 587.03 24 x 10 D2124-10 1 - 608.87 24 x 10 D2324-10 1 - 654.54 24 x 12 D2124-12 1 - 729.26 24 x 12 D2324-12 1 - 783.96 24 x 14 D2124-14 1 - 782.81 24 x 14 D2324-14 1 - 841.52 24 x 16 D2124-16 1 - 878.74 24 x 16 D2324-16 1 - 944.65 24 x 18 D2124-18 1 - 958.79 24 x 18 D2324-18 1 - 1,030.70 24 x 20 D2124-20 1 - 1,079.34 24 x 20 D2324-20 1 - 1,160.29 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC





Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Skirt Gasket for Saddle Tee Skirt Gasket for Saddle Wye 4” Inlet G5004 6 - 13.70 4” Inlet G5054 6 - 15.30 6” Inlet G5006 4 - 17.95 6” Inlet G5056 4 - 20.55 Stainless Steel Clamp (QuickLock) U Bend (Two Piece) 6 P5128 1 - 13.95 †4 x 4 D1844 3 - 79.67 8 P5188 1 - 19.21 †6 x 6 D1866 3 - 222.88 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC †Denotes Assembled from Molded Components Specifications: ASTM D2665, F1866, CSA B181.2 Additional Sizes Available upon Request Non-Stock items are non-cancelable, non-returnable

Page D9

perfect fitâ„¢ solvent weld dwv fittings d injection molded in

Documents