penerbitan jurnal mengikut jabatan$nerbitan...effect of layers and bullet type on impact properties...

1

2014 Senarai Penerbitan Fakulti Kejuruteraan UPM

PENERBITAN JURNAL MENGIKUT JABATAN

JABATAN KEJURUTERAAN AEROANGKASA

1. Djojodihardjo, H., Haur, T.J., 2014, An assessment of the influence of J2 on formation flying of micro-satellites in low orbits,

Advanced Science Letters, 20(2), pp 439-445, I.F. 1.253

2. Djojodihardjo, H., Thangarajah, N., 2014, Research, development and recent patents on aerodynamic surface circulation

control - a critical review, Recent Patents on Mechanical Engineering, 7(1), pp 1-37.

3. Hamdan, A. , Mustapha, F. , Ahmad, K.A. , Mohd Rafie, A.S., 2014, A review on the micro energy harvester in Structural

Health Monitoring (SHM) of biocomposite material for Vertical Axis Wind Turbine (VAWT) system: A Malaysia perspective,

Renewable and Sustainable Energy Reviews, 35(2014), pp 23-30, I.F 5.627.

4. S. N. S. Jamaludin, S. Basri, Ahmad Hussain, Dheya Shujaa Al-Othmany, F. Mustapha, and D. M. Nuruzzaman, 2014,

Three-Dimensional Finite Element Modeling of Thermomechanical Problems in Functionally Graded

Hydroxyapatite/Titanium Plate, Mathematical Problems in Engineering, 2014(2014), PP 20.

5. Lee, Chih Fang, Abdullah, Mohd. Zulkifly, Ahmad, Kamarul Arifin, Shuaib, Ibrahim Lutfi, 2014, Analytical Comparisons of

Standardized Nasal Cavity, Journal of Medical Imaging and Health Informatics, 4(1), pp 14-20, I.F. 0.642.

6. Rasid, Z.A. , Zahari, R. , Ayob, A., 2014, The instability improvement of the symmetric angle-ply and cross-ply composite

plates with shape memory alloy using finite element method, Advances in Mechanical Engineering, 2014(2014), I.F. 1.062.

7. Rahmanian, S., Suraya, A.R.b , Shazed, M.A., Zahari, R., Zainudin, E.S., 2014, Mechanical characterization of epoxy

composite with multiscale reinforcements: Carbon nanotubes and short carbon fibers, Materials and Design, 60(2014), pp

34-40.

8. Haery, H.A. , Zahari, R., Kuntjoro, W., Taib, Y.M., 2014, Tensile strength of notched woven fabric hybrid glass,

carbon/epoxy composite laminates, Journal of Industrial Textiles, 43(3), PP 383-395, I.F. 1.308.

9. Rasooliyazdi, E. , Zahari, R.B. , Ghadianlou, A., Farhaninejad, A., Sahari, B.B. , Aziz, F.A. , Jamali, H., 2014,

Crashworthiness design of vehicle side door beam based on elliptical geometry modification using multi-objective

optimization, International Review of Mechanical Engineering, 8(1), PP 28-35.

10. Abdul Rahman M.A., Omar Baki M.A., Mohd Rafie A.S., Varatharajoo R., 2014, Material properties of random oriented

pressed mat coir fibre/epoxy composites, International Review of Mechanical Engineering, 8(1), PP 89-93.

11. Abral, H. , Kadriadi, D., Rodianus, A., Mastariyanto, P., Ilhamdia, Arief, S., Sapuan, S.M., Ishak, M.R., 2014, Mechanical

properties of water hyacinth fibers - polyester composites before and after immersion in water, Materials and Design,

58(2014), PP 125-129, I.F. 2.913.

12. Alkbir M.F.M., Sapuan S.M., Nuraini A.A., Ishak M.R., 2014, Effect of geometry on crashworthiness parameters of natural

kenaf fibre reinforced composite hexagonal tubes, Materials and Design, 60(2014), PP 85-93, I.F 2.913.

13. Loughlan, J., Yidris, N., 2014, The local-overall flexural interaction of fixed-ended plain channel columns and the influence

on behaviour of local conditions at the constituent plate ends, Thin-Walled Structures, 81(2014), pp 132-137, I.F. 1.231.

14. Sufian S.F., Fairuz Z.M., Zubair M., Abdullah M.Z., Mohamed J.J., 2014, Thermal analysis of dual piezoelectric fans for

cooling multi-LED packages, Microelectronics Reliability, 54(8), pp 1534-1543, I.F 1.137.

15. Fairuz, Z.M. , Sufian, S.F., Abdullah, M.Z., Zubair, M., Abdul Aziz, M.S., 2014, Effect of piezoelectric fan mode shape on the

heat transfer characteristics, International Communications in Heat and Mass Transfer, 52(2014), pp 140-151, I.F 2.208.

16. Mohd Aris, K.D., Mustapha, F., Salit, M.S., Abdul Majid, D.L.A., 2014, Condition structural index using principal component

analysis for undamaged, damage and repair conditions of carbon fiber-reinforced plastic laminate, Journal of Intelligent

Material Systems and Structures, 25(5), pp 575-584, I.F. 1.523

17. Rosdi Ibrahim, Mohamad Azmirruddin Ahmad, Muhammad Jabir Suleiman @ Ahmad, Nurhaslina Johari, Mazlan Mohamad,

A.R.A. Talib, 2014, Effect of Solid Loading on the Physical Properties of the Sintered Inconel 718 Using Metal Injection

Moulding (MIM), Advanced Materials Research, 879(2014), pp 164-168

18. Mohamad Azmirruddin Ahmad, Nurhaslina Johari, Muhammad Jabir Suleiman @ Ahmad, Rosdi Ibrahim, Abdul Rahim Abu

Talib, 2014, Analysis of the Rheological Behavior and Stability of Inconel 718 Powder Injection Molding (PIM) Feedstock,

Advanced Materials Research, 879(2014), pp 63-72

19. Nurhaslina Johari, Rosdi Ibrahim, Mohamad Azmirruddin Ahmad, Muhammad Jabir Suleiman @ Ahmad, Abdul Rahim Abu

Talib, 2014, The Effect of Sintering Temperature on Physical Properties of Sintered Inconel 718 for Potential Aerospace

Industry Application, Advanced Materials Research, 879(2014), pp 139-143

20. Saffry, Z.A.C., Majid, D.L., Romli, F.I. , Mustapha, F. , Abdullah, E.J., 2014, Identification of modal properties of composite

thin plate using OMA in wind tunnel environment, Applied Mechanics and Materials, 446-447(2014), pp 606-610

21. Mohd, A.K.D., Mustapha, F. , Sapuan, S.M. , Majid, D., 2014, Experimental validation on time base analysis of various

aircraft CFRP panel conditions for structural health monitoring, Key Engineering Materials, 594-595(2014), pp 935-939

22. Haidzir, H., Majid, D.L. , Rafie, A.S.M. , Harmin, M.Y., 2014, Modal properties of hybrid carbon/kevlar composite thin plate

and hollow wing model, Applied Mechanics and Materials, 446-447(2014), pp 597-601

23. Mohd Aris, K.D., Mustapha, F., Salit, M.S., Abdul Majid, D.L.A., 2014, Condition structural index using principal component

analysis for undamaged, damage and repair conditions of carbon fiber-reinforced plastic laminate, Journal of Intelligent

Material Systems and Structures, 25(5), pp 575-584

2


24. Romli, F.I., 2014, Conceptual aircraft design exploration through functional approach, Applied Mechanics and Materials,

446-447(2014), pp 602-605

25. M.S. Abdul Aziz, M.Z. Abdullah, Kamarul Arifin Ahmad, 2014, Numerical Investigations of Membrane Surface Effects on

NACA 643- 218 Airfoil, Applied Mechanics and Materials, 564(2014), pp 60-65

26. Harijono Djojodihardjo, Muljo Widodo Kartidjo, 2014, Generic Theoretical and Experimental Development of Micro Aerial

Vehicle Using Fundamental Principles, Applied Mechanics and Materials, 564(2014), pp 110-117

27. Harijono Djojodihardjo, 2014, Overview of Coanda Jet and Vortex Cell Circulation Control, Applied Mechanics and

Materials, 564(2014), pp 118-125

28. Muhammad Kusni, Benjamin Soenarko, Harijono Djojodihardjo, 2014, Application of a Multipole Secondary Source for

Propeller Active Noise Control, Applied Mechanics and Materials, 564(2014), pp 135-142

29. A. Hamdan * , F. Mustapha, Kamarul Arifin Ahmad, A.S.M. Rafie, Mohamed Thariq Hameed Sultan, M.R. Ishak, 2014, A

Review on the Self-Energize Structural Health Monitoring (SHM) in Vertical Axis Wind Turbine (VAWT) System, Applied

Mechanics and Materials, 564(2014), pp 157-163

30. Nadiir Bheekhun * , Abd Rahim Abu Talib, Hasril Hasini, Mohd Roshdi Hassan, 2014, Flame Temperature Distribution from

ISO2685 Standard Propane-Air Burner Using CFD, Applied Mechanics and Materials, 564(2014), pp 240-244

31. N.S.B. Yusof * , A.S.M. Rafie, M.K.A.M. Ariffin, N Othman, 2014, Validation of Flow Impact to Detect the Energy Loss in Ball

Valve, Applied Mechanics and Materials, 564(2014), pp 281-286

32. M.M. Boroojerdian, Nor Maria Adam * , Azmin Shakrine Mohd Rafie , 2014, Wind Tunnel Study on the Pressure Coefficient

Performance of Different Venturi Shaped Roof Configurations for Wind Induced Natural Ventilation, Applied Mechanics and

Materials, 564(2014), pp 287-291

33. Munir Faraj M.A Ikbir * , S.M. Sapuan, A.A. Nuraini, Mohamad Ridzwan Ishak, 2014, Experimental Quasi-Static Axial

Crushing of Non-Woven Kenaf Fibre/Epoxy Hexagonal Composite Tubes, Applied Mechanics and Materials, 564(2014), pp

361-365

34. M.K.H. Muda, F. Mustapha * , K.D. Mohd Aris, Mohamed Thariq Hameed Sultan, 2014, Fabrication Technique for Bio-

Composite Patch Repair on Laminated Structures of CFRP Plate, Applied Mechanics and Materials, 564(2014), pp 366-371

35. N. Razali, Mohamed Thariq Hameed Sultan, S.N.A. Safri, Shahnor Basri * , Noorfaizal Yidris, Faizal Mustapha, 2014, High

Velocity Impact Test on Glass Fibre Reinforced Polymer (GFRP) Using a Single Stage Gas Gun (SSGG) - An Experimental

Based Approach, Applied Mechanics and Materials, 564(2014), pp 376-381

36. Mohamed Thariq Hameed Sultan * , Shahnor Basri, Azmin Shakrine Mohd Rafie, Noorfaizal Yidris, Faizal Mustapha, Rizal

Zahari, M.R. Ajir, 2014, Impact Damage Analysis for Glass Reinforced Epoxy Laminated Plates Using Single Stage Gas

Gun, Applied Mechanics and Materials, 564(2014), pp 382-387

37. Parnia Zakikhani * , R. Zahari, Mohamed Thariq Hameed Sultan, 2014, Simulation of Low Velocity Impact on Composite

Hemispherical Shell, Applied Mechanics and Materials, 564(2014), pp 406-411

38. Sairizal Misri * , S.M. Sapuan, Zulkiflle Leman, M.R. Ishak, 2014, Tensile Properties of Kenaf Yarn Fibre Reinforced

Unsaturated Polyester Composites at Different Fibre Orientations, Applied Mechanics and Materials, 564(2014), pp 412-417

39. S.N.A. Safri * , Mohamed Thariq Hameed Sultan, N. Razali, Shahnor Basri, Noorfaizal Yidris, Faizal Mustapha, 2014, The

Effect of Layers and Bullet Type on Impact Properties of Glass Fibre Reinforced Polymer (GFRP) Using a Single Stage Gas

Gun (SSGG), Applied Mechanics and Materials, 564(2014), pp 428-433

40. Noorfaizal Yidris * , Mohamed Thariq Hameed Sultan, Mohammad Yazdi Harmin, Azmin Shakrine Mohd Rafie, 2014,

Local-Overall Flexural Interaction of Pinned-Ended Thin-Walled I-Section Columns, Applied Mechanics and Materials,

564(2014), pp 444-448

41. Mohamed P. Hassab * , Abdullah S. Mahmud, A.S.M. Rafie, Rizal Zahari, 2014, Alternative Numerical Validation

Methodology for Short-Term Development Projects, Applied Mechanics and Materials, 564(2014), pp 638-643

42. K. Nadia, M. R. Ishak & S. Misri, 2014, Kenaf Fibre: Its Potential and Review on Bending Fatigue of Hollow Shaft

Composites, Applied Mechanics and Materials, 629(2014), pp 395-398

43. Mohammed Zubair, Kamarul Arifin Ahmad, Vizy Nazira Riazuddin, 2014, A Review on the Impact of Aircraft Cabin Air

Quality and Cabin Pressure on Human Wellbeing, Applied Mechanics and Materials, 629(2014), pp 388-394

44. Navanitha Marimuthu, Emira J. Abdullah, Dayang L. A. Majid & Fairuz I. Romli, 2014, Conceptual Design of Flapping Wing

using Shape Memory Alloy Actuator for Micro Unmanned Aerial Vehicle, Applied Mechanics and Materials, 629(2014), pp

152-157

45. H. Yusoff, M. Z. Abdullah, K. A. Ahmad, M. K. Abdullah, S. Suhaimi, 2014, Experimental Study on the Effect of Skin

Flexibility on Aerodynamic Performance of Flapping Wings for Micro Air Vehicles, Applied Mechanics and Materials,

629(2014), pp 18-23

46. S. M. A. Aftab & K. A. Ahmad, 2014, NACA 4415 Wing Modification using Tubercles- A Numerical Analysis, Applied


47. Muhammad Ihsan Abdul Latiff, Siti Nur Sakinah Jamaludin, Shahnor Basri, Ahmad Hussain, Dheya Shuja Alothmany, Faizal

Mustapha, Dewan Muhammad Nuruzzaman, Noor Mazni Ismail, Izwan Ismail, 2014, Effect of Sintering Temperature on

Functionally Graded Nickel/Alumina Plate, Applied Mechanics and Materials, 629(2014)

48. Samira Eshghi & Renuganth Varatharajoo, 2014, Sliding Mode Control Techniques for Combined Energy and Attitude

Control System, Applied Mechanics and Materials, 629(2014), pp 310-317

3


49. Mohd Amirul Abdul Rahman, A. S. Mohd Rafie, Regunath Varatharajoo, 2014, LCO Flutter Analysis on Coir Presses Mat

Fibre/Epoxy Composites Plate, Applied Mechanics and Materials, 629(2014), pp 71-77

50. Aaron Aw Teik Hong & Renuganth Varatharajoo, 2014, Tether Tension Performance Utilizing Various Materials for a

Coplanar and Non-Coplanar Model of A Flexible Tethered Satellite System, Applied Mechanics and Materials, 629(2014), pp

281-285

51. Harijono Djojodihardjo, Ali Yousefian, 2014, A Parametric Study of Interplanetary Mission using Solar Sail, Applied


52. Harijono Djojodihardjo & Abdullah Saad Mahmud, 2014, Finite Element Computational Modeling and Simulation Studies of

Non-Penetrating Impact using Fundimental Principles, Applied Mechanics and Materials, 629(2014), pp 62-70

53. Riyadh Ibraheem Ahmed, Harijono Djojodihardjo, Abd Rahim Abu Talib, Mohd Faisal Abd Hamid, 2014, Application of

Coanda Jet Generating Lift for Micro Air Vehicles - Preliminary Design Considerations, Applied Mechanics and Materials,

629(2014), pp 139-144

54. Harijono Djojodihardjo, Muhammad Anas Abd Bari, Azmin Shakrine Mohd Rafie, Surjatin Wiriadidjaja, 2014, Further

Development of the Kinematic and Aerodynamic Modeling and Analysis of Flapping Wing Ornithopter from Basic Principles,

Applied Mechanics and Materials, 629(2014), pp 9-17

55. Fairuz I. Romli, Azmin Shakrine Mohd Rafie & Surjatin Wiriadidjaja, 2014, Conceptual Product Design Methodology through

Functional Analysis, Applied Mechanics and Materials, 834-836(2014), pp 1728-1731

56. Surjatin Wiriadidjaja, Azmin Shakrine Mohd Rafie, Faizal Mustapha, Fadilah Hasim, Tabrej Khan & Harijono Djojodihardjo,

2014, Basic Geometries of the New Closed Circuit Wind Tunnel of the Universiti Putra Malaysia (UPM), Applied Mechanics

and Materials, 629(2014), pp 376-381

57. Priyanka Subhash Gaikwad, E. J. Abdullah, D. L. Majid & Azmin Shakrine Mohd Rafie, 2014, Experimental Study on

Variable Deflectrion Control of SMA Actuated Composite Plate, Applied Mechanics and Materials, 629(2014), pp 235-239

58. Tan Kai Jun, Mohammad Yazdi Harmin, Faruz I. Romli, 2014, Aeroelastic Tailoring of Composite Wing Design using Bee

Colony Optimisation, Applied Mechanics and Materials, 629(2014), pp 182-188

59. Amir Rasydan Mat, Liew Mun How, Omar Kassim Ariff, M. Amzari M. Zhahir, Ramly M. Ajir, 2014, Autonomous Aerial Hard

Docking of Fixed and Rotary Wing UAVs: Task Assessment and Solution Architecture, Applied Mechanics and Materials,

629(2014), pp 176-181

60. O. K. Ariff, E. Salami, M. T. Ahmad & T. H. Go, 2014, Investigation into Air Interception Guidance Algorithms for

Autonomous Aerial Hard Docking of Dissmilar Platform, Applied Mechanics and Materials, 629(2014), pp 214-218

61. Mohamed Tarmizi Ahmad, Michael Lam, A. S. Mohd Harithuddin, Amzari Zhahir & O. K. Ariff, 2014, Flight Data

Monitoring/Tracker System for Search and Rescue mission, Applied Mechanics and Materials, 629(2014), pp 350-354

62. Mohammad Jafari, Harijono Djojodihardjo, Kamarul Arifin Ahmad, 2014, Vibration Analysis of a Cantilevered Beam with

Spring Loading at the Tip as Generic Elastic Structure, Applied Mechanics and Materials, 629(2014), pp 407-413

4


JABATAN KEJURUTERAAN AWAM

1. Bahmani, S.H., Huat, B.B.K., Asadi, A., Farzadnia, N., 2014, Stabilization of residual soil using SiO2 nanoparticles and

cement, Construction and Building Materials, 64(2014), pp 350-359, I.F. 2.293.

2. Moayedi, H., Nazir, R., Kassim, K.A., Huat, B.K., 2014, Measurement of the electrokinetic properties of peats treated with

chemical solutions, Measurement: Journal of the International Measurement Confederation, 49(1), pp 289-295, I.F. 1.13.

3. Moayedi, H., Nazir, R., Kazemian, S., Huat, B.K., 2014, Microstructure analysis of electrokinetically stabilized peat,

Measurement: Journal of the International Measurement Confederation, 48(1), pp 187-194, I.F 1.13.

4. Liaghat, S., Mansor, S., Ehsani, R., Shafri, H.Z.M., Meon, S., Sankaran, S., 2014, Mid-infrared spectroscopy for early

detection of basal stem rot disease in oil palm, Computers and Electronics in Agriculture, 101(2014), PP 48-54, I.F. 1.766.

5. Muniandy, R., Moazami, D., Hamid, H., Hassim, S., 2014, Characterization of effective tire contact area for various tread

patterns, Instrumentation Science and Technology, 42(1), pp 15-26, I.F. 0.429.

6. Kheradmand, B., Muniandy, R., Hua, L.T., Yunus, R.B., Solouki, A., 2014, An overview of the emerging warm mix asphalt

technology, International Journal of Pavement Engineering, 15(1), I.F. 0.745.

7. H.Moayedi, R. Nazir, M. Mosallanezhad, S. Kazemian, B.K.Huat, 2014, Peaty Soil Improvement by Using Cationic Reagent

Grout and Electrokinetic Method, Geotechnical and Geological Engineering, 32(2014), pp 933-947.

8. Hamed A.Keykha, Bujang B.K.Huat, Afshin Asadi, 2014, Electrokinetic Stabilization of Soft Soil Using Carbonate-Producing

Bacteria, Geotechnical and Geological Engineering, 32(4), PP 739-747.

9. R. Sathyamurthy, Nagarajan, P. K., Kennady, H., Ravikumar, T. S., Paulson, V., Ahsan, A., H., 2014, Enhancing the heat

transfer of triangular pyramid solar still using phase change material as storage material, Frontiers in Heat and Mass

Transfer, 5(3), PP 1-7.

10. R. Sathyamurthy, H.J. Kennady, P.K. Nagarajan, A. Ahsan, 2014, Factors affecting the performance of triangular pyramid

solar still, Desalination, 344(2014), PP 383-390, I.F. 3.041.

11. M.M. Rahman, H. Öztop, S. Mekhilef, R. Saidur, A. Ahsan, K. Al-Salem, 2014, Modeling of unsteady natural convection for

double-pipe in a partially cooled enclosure, Numerical Heat Transfer, Part A: Applications (An International Journal of

Computation and Methodology), 66(5), PP 582-603, I.F. 1.803.

12. A. Ahsan, N. Syuhada, E. Jolhi, K.M. Darain, MK Rowshon, M. Jakariya, S. Shafie, AH Ghazali, 2014, Assessment of

Distillate Water Quality Parameters Produced By Solar Still for Potable Usage, Fresenius Environmental Bulletin, 23(3a), PP

859-866, I.F 0.641.

13. H.A. Arafat, K. Jijakli, A. Ahsan, 2014, Environmental performance and energy recovery potential of five processes for

municipal solid waste treatment, Journal of Cleaner Production, Publish Online(2014), I.F. 3.398.

14. MM Rahman, MAM Salleh, U Rashid, A Ahsan, MM Hossain, CS Ra, 2014, Production of slow release crystal fertilizer from

wastewaters through struvite crystallization-A review, Arabian Journal of Chemistry, 7(1), pp 139-155, I.F 2.266.

15. Huda ASN, S Mekhilef, A Ahsan, 2014, Biomass energy in Bangladesh: Current status and prospects, Renewable and

Sustainable Energy Reviews, 30(2014), pp 504-517, I.F 5.627.

16. A. Ahsan, M. Imteaz, U.A. Thomas, M. Azmi, A. Rahman, N.N. Nik Daud, 2014, Parameters affecting the performance of a

low cost solar still, Applied Energy, 114(2014), pp 924-930, I.F. 4.781.

17. Ehsan Nikbakht, Khalim Rashid, Farzad Hejazi, Siti A. Osman,2014, A numerical study on seismic response of self-centring

precast segmental columns at different post-tensioning forces, Latin American Journal of Solids and Structures, 11, 5, 864-

833, 1.24, ISI

18. Alireza Hamedianfar, Helmi Zulhaidi Mohd Shafri, Shattri Mansor & Noordin Ahmad, 2014, Improving detailed rule-based

feature extraction of urban areas from WorldView-2 image and lidar data, International Journal of Remote Sensing, 35(5), pp

1876-1899, I.F. 1.138.

19. Nik Mohd Ramli Nik Yusoff, Helmi Zulhaidi Mohd Shafri and Ratnasamy Muniandy, Islam Mohammad Wali, 2014,

Development of Obstacle Avoidance Technique in Web-Based Geographic Information System for Traffic Management

Using Open Source software, Journal of Computer Science, 10(8), pp 1259-1268.

20. Ladan Ebadi, Helmi Z. M. Shafri, 2014, Compression of remote sensing data using second-generation wavelets: a review,

Environmental Earth Sciences, 71(3), pp 1379-1387, I.F. 1.445

21. Raizal S.M. Rashid and Riyad S. Aboutaha, 2014, Analytical model for CFRP strengthened circular RC column under

elevated temperature, Computers and Concrete, 13(3), pp 517-529, I.F. 0.936

22. Behzad Nematollahi, Yen Lei Voo, and Raizal Saifulnaz M. R., 2014, Structural Behavior of Precast Ultra-High Performance

Fiber Reinforced Concrete (UHPFRC) Cantilever Retaining Walls: Part I- Analysis and Design Procedures and

Environmental Impact Calculations (EIC), KSCE Journal of Civil Engineering, 18(5), pp 1470-1480, I.F. 0.383

23. Behzad Nematollahi, Yen Lei Voo, and Raizal Saifulnaz M. R., 2014, Structural Behavior of Precast Ultra-High Performance

Fiber Reinforced Concrete (UHPFRC) Cantilever Retaining Walls: Part II - Full Scale Experimental Testing, KSCE Journal of

Civil Engineering, 18(5), pp 1481-1495, I.F. 0.383.

24. A. Ahsan, M. Alamgir, M. M. El-Sergany, S. Shams, M. K. Rowshon & N. N. Nik Daud, 2014, Assessment of Municipal Solid

Waste Management System in a Developing Country, Chinese Journal of Engineering, 2014(2014), pp 1-1

25. Sinan Jasim Hadi, Helmi Z. M. Shafri, Mustafa D. Mahir, 2014, Factors Affecting the Eco-Environment Identification Through

Change Detection Analysis by Using Remote Sensing and GIS:A Case Study of Tikrit, Iraq, Arabian Journal for Science and

Engineering, 39, pp 395-405, I.F. 0.385

5


26. Alireza Hamedianfar, Helmi Zulhaidi Mohd Shafri, Shattri Mansor, Noordin Ahmad,2014, Combining data mining algorithm

and object-based image analysis for detailed urban mapping of hyperspectral images, Journal of Applied Remote Sensing, 8,

1, , 1.025, ISI

27. Thamer Ahmad Mohammad, Ezzuldin Hasan Mohamed, Megat Johari Megat Mohd Noor, Abdul Halim Ghazali, 2014, Dual

Polyelectrolytes Incorporating Moringa Oleifera in the Dewatering of Sewage Sludge, Desalination and Water Treatment,

2014, pp 1-8, I.F. 0.968,

28. Ezzuldin Hasan Mohamed, Thamer Ahmad Mohammad, Megat Johari Megat Mohd Noor, Abdul Halim Ghazali, 2014,

Influence of Extraction and Freeze-Drying Durations on The Effectiveness of Moringa Oleifera Seeds Powder as a Natural

Coagulant, Desalination and Water Treatment, 2014, pp 1-7, I.F. 0.852

29. Megat Johari Megat Mohd Noor, Ezzuldin Hasan Mohamed, Thamer Ahmad Mohammad, Abdul Halim Ghazali,2014,

Effectiveness of Salt-Extracted Freeze-Dried Moringa Oleifera as a Coagulant, Desalination and Water Treatment, 2014, pp

1-7, I.F. 0.852, ISI

30. Ata Amini, Bruce W.Melville, Thamer M. Ali, 2014, Local Scour at Piled Bridge Piers Including an Examination of the

Superposition Method, Canadian Journal of Civil Engineering, 41(5), pp 461-471, I.F. 0.602

31. M. Rosli Hainin, Md Maniruzzaman A. Aziz, Manouchehr Shokri, Ramadhansah Putra Jaya, Norhidayah Abdul Hassan,

Amimul Ahsan, 2014, Performance of Steel Slag in Highway Surface Cource, Jurnal Teknologi, 71(3), pp 99-102

32. Pradhan, B., Hagemann, U., Tehrany, M., Prechtel, N., 2014, An easy to use ArcMap based texture analysis program for

extraction of flooded areas from TerraSAR-X satellite image, Computers & Geosciences, 63(2014), pp 34-43, I.F. 1.834

33. Saeidi, V., Pradhan, B., 2014, Fusion of Airborne LiDAR with Multispectral SPOT 5 Image for Enhancement of Feature

Extraction Using Dempster-Shafer Theory’, IEEE Transactions on Geoscience and Remote Sensing, 52(10), pp 6017 – 6025,

I.F. 3.467

34. Nampak, H., Pradhan, B. , Manap, M.A., 2014, Application of GIS based data driven evidential belief function model to

predict potential groundwater zonation in Langat basin, Malaysia, Journal of Hydrology , 513, pp 283-300, I.F. 2.964

35. Nourani, V., Pradhan, B. , Ghaffari, H., Sharifinia, S.S.,2014, Landslide susceptibility mapping at Zonouz plain, Iran using

genetic algorithm and comparison with frequency ratio, logistic regression, and artificial neural network models, Natural

Hazards, 71(1), pp 523-547, I.F. 1.639

36. Althuwaynee, O.F., Pradhan, B. , Park, H.J., Lee, J.H., 2014, A novel ensemble bivariate statistical evidential belief function

with knowledge-based analytical hierarchy process and multivariate statistical logistic regression for landslide susceptibility

mapping, Catena, 114, pp 21-36, I.F. 1.881

37. Althuwaynee, O.F., Pradhan, B. , Park, H.J., Lee, J.H.,2014, A novel ensemble decision-tree based CHi-squared automatic

interaction detection (CHAID) and multivariate logistic regression models in landslide susceptibility mapping, Landslides, 11,

1063-1078, 2.09, ISI

38. Abdullahi, S., Mahmud, A.R., Pradhan, B., 2014, Spatial modeling of site suitability assessment for hospitals using GIS

based multicriteria approach at Qazvin city, Iran, Geocarto International , 29(2), pp 164-184 , I.F. 0.575

39. Regmi, A.D., Devkota, K., Yoshida, K., Pradhan*, B., Pourghasemi, H.R., Khumamoto, T., Akgun, A. ,2014, Application of

frequency ratio, statistical index, and weights-of-evidence models and their comparison in landslide susceptibility mapping in

Central Nepal Himalaya, Arabian Journal of Geosciences , 7(2), pp 725-742, I.F. 1.265

40. Amani, A., Mansor, S. , Pradhan, B., Billa, L., Pirasteh, S.,2014, Coupling effect of ozone column and atmospheric infrared

sounder data reveal evidence of earthquake precursor phenomena of Bam earthquake, Iran, Arabian Journal of

Geosciences, 7(4), pp 1517-1527, I.F. 1.265

41. Pourghasemi, H.R., Moradi*, H.R., Fatemi Aghda, S.M., Gokceoglu, C., Pradhan, B., 2014, GIS-based landslide

susceptibility mapping with probabilistic likelihood ratio and spatial multi criteria evaluation models (North of Tehran, Iran,

Arabian Journal of Geosciences , 7(5), pp 1857 – 1878, I.F. 1.265

42. Pourghasemi, H.R., Moradi, H.R., Fatemi Aghda, S.M., Jirandeh, A.G., Pradhan, B. , Sezer, E.A., Gokceoglu, C., 2014,

Assessment of fractal dimension and geometrical characteristics of the landslides identified in North of Tehran, Iran,

Environmental Earth Sciences , 71(8), pp 3617-3626, I.F. 1.445

43. Manap, M.A., Nampak, H., Pradhan, B., Lee, S., Sulaiman, W.N.A., Ramli, M.F., 2014, Application of probabilistic-based

frequency ratio model in groundwater potential mapping using remote sensing data and GIS., Arabian Journal of

Geosciences, 7(2), pp 711-724, I.F. 1.265

44. Elbialy, S., Mahmoud, A., Pradhan, B. ,Buchroithner, M., 2014, Application of spaceborne SAR data for extraction of soil

moisture and its use in hydrological modelling at Gottleuba Catchment, Saxony, Germany, Journal of Flood Risk

Management, 7(2), pp 159-175, I.F. 1.492

45. Pradhan, B. , Abokharima, M.H., Jebur, M.N., Tehrany, M.S.,2014, Land subsidence susceptibility mapping at Kinta Valley

(Malaysia) using evidential belief function model in GIS, Natural Hazards , 73, 2, 1019-1042, 1.639, ISI

46. Yusuf, Y.A., Pradhan, B. , Idrees, M.O.,2014, Spatio-temporal Assessment of urban heat island effects in Kuala Lumpur

Metropolitan City using Landsat images, Journal of the Indian Society of Remote Sensing, 42, 4, 829-837, 0.344, ISI

47. Tehrany, M.S., Pradhan, B., Jebur, M.N., 2014, Flood susceptibility mapping using a novel ensemble weights-of-evidence

and support vector machine models in GIS, Journal of Hydrology, 512, pp 332-343, I.F. 2.964

48. Jebur, M.N., Pradhan, B. , Tehrany, M.S.,2014, Detection of vertical slope movement in highly vegetated tropical area of

Gunung pass landslide, Malaysia, using L-band InSAR technique, Geosciences Journal , 18(1), pp 61-68, I.F. 0.618

6


49. Regmi, A.D., Yoshida, K., Nagata, H., Pradhan, B. ,2014, Rock toppling assessment at Mugling-Narayanghat road section 'a

case study from Mauri Khola landslide', Nepal, Catena, 114, pp67-77, I.F. 1.881

50. Shoa, Z.T., Nateghi, S., Nohegar, H., Amiri, F., Pradhan, B. ,2014, Sediment yield assessment at basin scale using

geospatial technique, Arabian Journal of Geosciences , 7(7), pp 2841-2850, I.F. 1.265

51. Xu, C., Xu, X., Porghasemi, H.R., Pradhan, B., Iqbal., J. ,2014, Volume, gravitational potential energy reduction, and regional

centroid position change in the wake of landslides triggered by the 14 April 2010 Yushu earthquake of China, Arabian Journal

of Geosciences, 7(6), pp 2129-2138 , I.F. 1.265

52. Hassaballa, AA., Althuwaynee, O.F., Pradhan, B , 2014, Extraction of soil moisture from RADARSAT-1 and its role in the

formation of the 6 December 2008 landslide at Bukit Antarabangsa, Kuala Lumpur, Arabian Journal of Geosciences , 7(7), pp

2831-2840, I.F. 1.265

53. Idrees, M.O., Saeidi, V., Yusuf, Y.A., Pradhan, B., 2014, advanced differential interferometry SAR techniques for deformation

monitoring: A review on sensors and recent research development, Geocarto International, 29(5), pp 536-553, I.F. 0.575

54. Tehrany, M.S., Lee, M.J., Pradhan, B. , Jebur, N.M., Lee, S.,,2014, Flood susceptibility mapping using integrated bivariate

and multivariate statistical models, Environmental Earth Sciences , 72, 10, 4001-4015, 1.445, ISI

55. Ziaei, Z., Pradhan, B. , Mansor S.,2014, A rule based parameters aided with object-based oriented classification approach

for extraction of building and roads from WorldView-2 images, Geocarto International , 29(5), pp 554-569, I.F. 0.575

56. Alsharif, AAA., Pradhan, B. ,2014, Urban Sprawl Analysis of Tripoli Metropolitan City (Libya) Using Remote Sensing Data

and Multivariate Logistic Regression Model, Journal of the Indian Society of Remote Sensing, 42(1), pp 149-163 , I.F. 0.344

57. Neshat A., Pradhan, B*. , Pirasteh, S., Shafri, HZM.,,2014, Estimating groundwater vulnerability to pollution using modified

DRASTIC model in the Kerman agricultural area, Iran, Environmental Earth Sciences , 71(7), pp 3119-3131, I.F. 1.442

58. Youssef, A.M., Pradhan, B. , Maerz, N.H.,2014, Debris flow impact assessment caused by 14 April 2012 rainfall along the Al-

Hada Highway, Kingdom of Saudi Arabia using high resolution satellite imagery, Arabian Journal of Geosciences , 7(7), pp

2591-2601, I.F. 1.265

59. Neshat A., Pradhan, B., Dadras, M., 2014, Groundwater Vulnerability Assessment Using an Improved DRASTIC Method.

Resources, Conservation and Recycling, 86, pp 74-86, I.F. 2.319

60. Neshat A., Pradhan, B. , Shafri, HZM.,,2014, An integrated GIS based statistical model to compute groundwater vulnerability

index for decision maker in agricultural area, Journal of the Indian Society of Remote Sensing , 42, 4, 777-788, 0.344, ISI

61. Salleh, S.A., Latif, Z.A., Pradhan, B. , Wan Mohd, W.M.N., Chan, A.,2014, Functional relation of land surface albedo with

climatological variables: a review on techniques and recent research developments, Geocarto International , 29(2), pp 147–

163, I.F. 0.575

62. Regmi, A.D., Yoshida, K., Dhital, M.R., Pradhan, B , 2014, Weathering and mineralogical variation in gneissic rocks and their

effect in Sangrumba Landslide, East Nepal, Environmental Earth Sciences , 71(6), pp 2711-2727, I.F. 1.445

63. Tien Bui, D., Tran, C., Pradhan, B. , Revhaug, I., Seidu, R.,2014, iGeoTrans – A novel iOS application for GPS positioning in

geosciences, Geocarto International , 30, 2, 202-217, 0.575, ISI

64. Tehrany, M.S., Pradhan, B. , Jebur, M.N.,2014, A comparative assessment between object and pixel-based classification

approaches for land use/land cover mapping using Spot 5 imagery, Geocarto International, 29(4), pp 351-369, I.F. 0.575

65. Sathyamurthy, R. , Nagarajan, P.K., Kennady, H.J., Ravikumar, T.S., Paulson, V. Ahsan, A. ,2014, Enhancement of fresh

water production on triangular pyramid solar still using phase change material as storage material , Frontiers in Heat and

Mass Transfer, 5(1)

66. Pourakbar, S., Azadi, M., Huat, B.B.K., Asadi, A, 2014, Estimation of adjacent building settlement during drilling of urban

tunnels, Electronic Journal of Geotechnical Engineering, 19B, pp 469-476

67. Pauzi, N.I.M., Omar, H., Huat, B.B.K., Misran, H., 2014, Characterizations of waste soil of open dumping area, Electronic

Journal of Geotechnical Engineering, 19F, pp 1265-1279

68. Pauzi, N.I.M. , Radhi, M.S.M. , Wong, L.S., Omar, H. ,2014, Tunneling in limestone rock using TBM method for MRT projects

near cochrane station, Electronic Journal of Geotechnical Engineering, 19L, pp 2535-2552

69. Abdulkareem, S.H. , Ahmed, T.M. , Ghazali, A.H.B.,2014, Safety assessment of earth dams in kurdistan region, iraq based

on seepage simulation and surveillance data, Electronic Journal of Geotechnical Engineering, 19O, pp 3597-3613

70. Razali, S.M., Marin, A. , Nuruddin, A.A. , Shafri, H.Z.M. , Hamid, H.A.,2014, Capability of integrated MODIS imagery and

ALOS for oil palm, rubber and forest areas mapping in tropical forest regions, Sensors (Switzerland), 14(5), pp 8259-8282,

I.F. 2.457

71. Dadras, M. , Shafri, H.Z.M. Ahmad, N., Pradhan, B., Safarpour, S.,2014, Six decades of urban growth using remote sensing

and GIS in the city of Bandar Abbas, Iran, IOP Conference Series: Earth and Environmental Science, 20(1)

72. Jebur, M.N., Mohd Shafri, H.Z., Pradhan, B. , Tehrany, M.S. ,2014, Per-pixel and object-oriented classification methods for

mapping urban land cover extraction using SPOT 5 imagery , Geocarto International, 29(7), I.F. 0.897

73. Hamedianfar, A., Shafri, H.Z.M. ,2014, Combining object-based classification and data mining algorithm to classify urban

surface materials from worldview-2 satellite image, ICISA 2014 - 2014 5th International Conference on Information Science

and Applications

74. Yusoff, N.M.R.N., Shafri, H.Z.M., Muniandy, R., 2014, an effective road management system using web-based GIS software,

IOP Conference Series: Earth and Environmental Science, 20(1)

7


75. Mansor, N.S., Shafri, H.Z.M., Mansor, S., Paradhan, B., 2014, the influence of urban development and social mobility on

socioeconomic level: The application of GIS on urban ecosystems, IOP Conference Series: Earth and Environmental

Science, 20(1)

76. Hassaballa, A.A. , Matori, A.N. , Shafri, H.Z.M. ,2014, Effect of soil depth on the quantification of soil moisture content value

estimated from noaa satellite images , Applied Mechanics and Materials, 567, pp 705-710

77. Hamedianfar, A., Shafri, H.Z.M. ,2014, Development of fuzzy rule-based parameters for urban object-oriented classification

using very high resolution imagery, Geocarto International, 29(3), pp 268-292

78. Kafi, K.M. , Shafri, H.Z.M. , Shariff, A.B.M.,2014, An analysis of LULC change detection using remotely sensed data; A Case

study of Bauchi City, IOP Conference Series: Earth and Environmental Science, 20(1)

79. Karim, I.A., Lee, C.H., Gil, A.J., Bonet, J., 2014, A two-step taylor-galerkin formulation for fast dynamics, Engineering

Computations (Swansea, Wales), 31(3), pp 366-387, I.F. 1.574

80. Hejazi, F. , Zabihi, A. , Jaafar, M.S.,2014, Development of elasto-plastic viscous damper finite element model for reinforced

concrete frames , Soil Dynamics and Earthquake Engineering, 65, pp 284-293, I.F. 1.638

81. Alawad, O.A. , Alhozaimy, A., Jaafar, M.S. , Al-Negheimish, A., Aziz, F.N.A.,2014, Microstructure analyses of autoclaved

ground dune sand-Portland cement paste, Construction and Building Materials, 65(29), pp 14-19, I.F. 2.769

82. Abdulrazeg, A.A. , Noorzaei, J., Jaafar, M.S. , Khanehzaei, P., Mohamed, T.A.,2014, Thermal and structural analysis of RCC

double-curvature arch dam, Journal of Civil Engineering and Management, 20(3), pp 434-445, I.F. 1.57

83. Alhozaimy, A., Alawad, O.A., Jaafar, M.S. , Al-Negheimish, A., Noorzaei, J., 2014, Use of fine ground dune sand as a

supplementary cementing material, Journal of Civil Engineering and Management, 20(1), pp 32-37, I.F. 1.57

84. Alawad, O.A. , Alhoziamy, A. , Jaafar, M.S. , Al-Negheimish, A. , Abdul Aziz, F.N.,2014, Properties of mortar incorporating

ground dune sand as cement replacement material, Advanced Materials Research, 925, pp 334-338

85. Nik Daud, N.N. , Mohammed, A.S.,2014, Material characterization of palm oil fuel ash (POFA) mixed with granite residual

soil, Advanced Materials Research, 955-959, pp 2093-2097

86. Muniandy, R. , Binti Che Md Akhir, N.A. , Hassim, S. , Moazami, D.,2014, Laboratory fatigue evaluation of modified and

unmodified asphalt binders in Stone Mastic Asphalt mixtures using a newly developed crack meander technique,

International Journal of Fatigue, 59, pp 1-8, I.F. 2.118

87. Liaghat, S. , Ehsani, R., Mansor, S. , Shafri, H.Z.M., Meon, S., Sankaran, S., Azam, S.H.M.N.,2014, Early detection of basal

stem rot disease (Ganoderma) in oil palms based on hyperspectral reflectance data using pattern recognition algorithms,

International Journal of Remote Sensing, 35(10), pp 3427-3439, I.F. 1.72

88. Farah Nora Aznieta Abd Aziz, Sani Mohammaed Bida, Noor Azline Mohd Nasir, Mohd Saleh Jaafar,2014, Mechanical

properties of lightweight mortar modified with oil palm fruit fibre and tire crumb, Construction and Building Materials, 73, pp

544-550, I.F. 2.769

89. Amimul Ahsan, Massedah Kamaludin, M.M. Rahman, A.H.M.F. Anwar, M.A. Bek, S. Idrus, 2014, Removal of Various

Pollutants from Leachate Using a Low-cost Technique: Integration of Electrolysis with Activated Carbon Contactor, Water Air

Soil Pollut, 225, 12, 2163, pp1-9, 1.943, ISI

90. M.M. Rahman, H. Öztop, S. Mekhilef, R. Saidur, A. Ahsan, K. Al-Salem, 2014, A finite element analysis on combined

convection and conduction in a channel with a thick walled cavity, International Journal of Numerical Methods for Heat &

Fluid Flow, 24(8), pp 1888-1905, I.F. 0.919

91. Sangar Hasan Abdulkareem, Thamer Mohamed Ahmed, Abdul Halim Ghazali, 2014, Management of risk through seepage

reduction for two earth dams in Kurdistan Region, Iraq, Enginering and Applied Sciences, 9(11), 2241,

92. Shahriar Shahbazpanahi, Abang Abdullah Abang Ali, Farah Nora Aznieta, Alaleh Kamgar,Nima Farzadnia , 2014, A

Theoretical Method for Fracture Resistance of Shear-Strengthened RC Beams with FRP, Arabian Journal for Science and

Engineering, 39(5), pp 3591-3597, I.F. 0.385

93. Nabila Rossley, Farah Nora Aznieta Abdul Aziz, Heng Chiang Chew, Nima Farzadnia, 2014, Behaviour of Vertical Loop Bar

Connection in Precast Wall Subjected To Shear Load, Australian Journal of Basic and Applied Sciences, 8(1), pp 370-380

94. Mohammad Panjehpour, Abang Abdullah Abang Ali, Yen Lei Voo and Farah Nora Aznieta, 2014, Effective compressive

strength of strut in CFRP strengthened reinforced concrete deep beams following ACI 318-11, Computers and Concrete,

13(1), pp 135-165, I.F. 0.936

95. Sadegh Naserkhaki, Marwan El-Rich, Farah N.A. Abdul Aziz and Hassan Pourmohammad, 2014, Pounding between

adjacent buildings of varying height coupled through soil, Structural Engineering and Mechanics, 52(3), pp 573-593, I.F.

0.803

96. Moslih Amer Salih, Abang Abdullah Abang Ali, Nima Farzadnia, 2014, Characterization of mechanical and microstructural

properties of palm oil fuel ash geopolymer cement paste, Construction and Building Materials, 65, pp 592-603, I.F. 2.265

97. M. Panjehpour, A.A.A. Ali, Y.L. Voo, F.N. Aznieta,, Modification of strut effectiveness factor for reinforced concrete deep

beams strengthened with CFRP laminates, Materiales de ConstruCCión, 64(314), I.F. 0.734

98. Mohammad Panjehpour, Abang Abdullah Abang Ali and Farah Nora Aznieta, 2014, Energy absorption of reinforced

concrete deep beams strengthened with CFRP sheet, Steel and Composites, 16(5), pp 481-489, I.F. 0.719

99. S. Shabazpanahi1, Abang Abdullah Abang Ali, Farah Nora Aznieta, Alaleh Kamgar,and Nima Farzadnia2, 2014, Finite

element modeling of crack propagation in RC beam by using energy approach, Journal of Engineering Science and

Technology Review, 7(1), pp 65-70

8


100. Shahriar Shabazpanahi, Abang Abdullah Abang Ali, Alaleh Kamgar, Nima Farzadnia,2014, Fracture mechanic modeling of

fiber reinforced polymer shear-strengthened reinforced concrete beam, Composites: Part B: Engineering, 68, pp 113-120, I.F.

2.602

101. Ramin Vaghei, Farzad Hejazi, Hafez Taheri, Mohd Saleh Jaafar, Abang Abdullah Abang Ali, Evaluate Performance of

Precast Concrete wall to wall Connection, APCBEE Procedia , 9(2014), pp 285-290

102. Anggraini, V, Asadi, A., Huat, B.B.K., Nahazanan, H., 2014, Effects coir fibers on tensile and compressive strength of lime

treated soft soil, Measurement , 59, pp 372-381, I.F. 1.526

103. Sady. A. Tayh, Ratnasamy Muniandy, Salihudin Hassim, Fauzan Jakarni, Eltaher Aburkaba, 2014, An Overview of

Utilization of Bio-oil In Hot Mix Asphalt, WALIA Journal, 30(S3), pp131-141, IF 2.265

104. MM Rahman, MAM Salleh, U Rashid, A Ahsan, MM Hossain, CS Ra,2014, Production of slow release crystal fertilizer from

wastewaters through struvite crystallization-A review, Arabian Journal of Chemistry, 7(1), pp 139-155, I.F. 2.266

105. Amiri, F., Shariff, A.R.M., Tabatabaie, Pradhan, B.,2014, A geospatial model for the optimization grazing management in

semi-arid rangeland of Iran, Arabian Journal of Geosciences , 7(3), pp 1101-1114, I.F. 1.265

106. Mirzaei, M. , Huang, Y.F., Lee, T.S., El-Shafie, A., Ghazali, A.H.,2014, Quantifying uncertainties associated with depth

duration frequency curves, Natural Hazards, 71(2), pp 1227-1239

107. Palizdan, N. , Falamarzi, Y. , Huang, Y.F. , Lee, T.S. , Ghazali, A.H.,2014, Regional precipitation trend analysis at the Langat

River Basin, Selangor, Malaysia, Theoretical and Applied Climatology, 117(3-4), pp 589-606

108. Aini, I.N., Aimrun, W. , Amin, M.S.M., Ezrin, M.H., Shafri, H.Z.,2014, Auto guided oil palm planter by using multi-GNSS, IOP

Conference Series: Earth and Environmental Science, 20(1)

109. Bensaeed, O.M., Shariff, A.M. , Mahmud, A.B., Shafri, H., Alfatni, M,2014, Oil palm fruit grading using a hyperspectral device

and machine learning algorithm, IOP Conference Series: Earth and Environmental Science, 20(1)

110. Khorramnia, K. , Shariff, A.R.M., Rahim, A.A., Mansor, S, 2014, Toward malaysian sustainable agriculture in 21st century,

IOP Conference Series: Earth and Environmental Science, 18(1)

111. Ghobadifar, F.a , Wayayok, A.b, Shattri, M.c, Shafri, H., 2014, Using SPOT-5 images in rice farming for detecting BPH

(Brown Plant Hopper), IOP Conference Series: Earth and Environmental Science, 20(1)

112. Peter Adeoye Aderemi, Hasfalina Che Man, Mohd Amin Mohd Soom, Thamer Ahmad Mohammed, Akinbile Christopher

Aluwakunmi,2014, Groundwater Quality of Shallow Wells on Nigerian Poultry Farms, Polish Journal of Environmental

Studies, 23(4), pp 1079-1089, I.F. 0.762

113. Intan Suhana M. R., Hussain Hamid, Law Teik Hwa, and Ahmad Farhan, 2014, Identification of Hazardous Road Sections:

Crash Data versus Composite Index Method, ACSIT International Journa of Engineering and Technology, Vol.6, No. 6,

December 2014, Scopus

114. A. Ahsan, M. Alamgir, M.M. El-Sergany, S. Shams, M.K. Rowshon, N.N.N. Daud, 2014, Assessment of municipal solid waste

management system in a developing country., Chinese Journal of Engineering, 561935, pp 1-11,

115. Shams S., Mahruf M., Shohel C., Ahsan A., 2014, Housing Problems for Middle and Low Income People in Bangladesh:

Challenges of Dhaka Megacity., Environment and Urbanization Asia, 5(1), pp 175-184

116. K.M. Darain, A. Ahsan, A.B.M.S. Islam, M. Obaydullah, R. Rashid, 2014, Investigating the deterioration of an industrial

heritage structure., International Journal of Sustainable Materials and Structural Systems, 1(3), pp 282-302

117. Behzad Nematollahi,M.R. Raizal Saifulnaz and Yen Lei Voo, 2014, Sustainability Assessment of Precast Ultra-High

Performance Fiber Reinforced Concrete (UHPFRC) Cantilever Retaining Walls, Research Journal of Applied Sciences,

Engineering and Technology, 7(19), pp 3971-3977

118. Rahul Dev and Amimul Ahsan, 2014, Thermal Model and Characteristics of Double Slope Solar Still, International Journal of

Information Technology, 6(1)

119. K.M. Darain, A. Ahsan, A.B.M.S. Islam, M. Obaydullah, R. Rashid, 2014, Investigating the deterioration of an industrial

heritage structure, International Journal of Sustainable Materials and Structural Systems, 1(3), pp 282-302

120. Nordila A., Thamer M. Ali, Faisal A., Badronnisa Y., 2014, Local Scour at Wide Bridge Piers, Int. Journal of Engineering

Research & Technology (IJERT), 3(1)

121. Jafar M. Hassan, Thamer A. Mohamed, Wahid S. Mohammed, and Wissam H. Alawee, 2014, Modeling the Uniform of

Manifold with Various Configurations, Journal of Fluids, 2014(2014)

122. Jafar M. Hassan, Wahid S. Mohammed, Thamer A. Mohamed, Wissam H. Alawee, 2014, Review on Single-Phase Fluid

Flow Distribution in Manifold, Int Jornal of Science and Research, 3(1)

123. Navid Nasrolah, Rahinah Ibrahim, Thamer Ahmed Mohammad, Azni Idris, 2014, Hazardous Effect of Raw Sewage Diposal

from Indigenous Housing settlement on Natural Water Bodies, International Journal of Current Research and Academic

Review, 1, pp 90-94

124. Amir Fateh, Farzad Hejazi, Tan Boon Cheong, Seyed Mohammad Reza Ghadiri.,2014, Dynamic Response of Slender and

Light Balcony Deck under Wind Loading, International Journal of Engineering & Technology Sciences, 2(3), pp 211-222

125. P.A.Adeoye, C.M.Hasfalina, M.S.M.Amin, A.M. Thamer and C.O.Akinbile, 2014, Environmental Implication of Poultry Waste

Generation and Management Techniques in Minna, Semi-Arid Region of Nigeria, Annual Research & Review in Biology,

4(10), pp 1669-1681

9


JABATAN KEJURUTERAAN BIOLOGI DAN PERTANIAN

1. Muhammad Hazwan Hamzah, Hasfalina Che Man, Zurina Zainal Abidin & Hishamuddin Jamaludin, 2014, Comparison of

Citronella Oil Extraction Methods from Cymbopogon nardus Grass by Ohmic-heated Hydro-Distillation and Steam

Distillation, BioResources, 9(1), pp 256-272, I.F. 1.309.

2. A. Sani, M. Rashid, N. Hanira, C. M. Hasfalina, 2014, The Influence of pH on the Removal of Ammonia from a Schedule

Waste Landmill Leachate, Jurnal Teknologi, 68(5), pp 25-28

3. M.N.A. Uda, Tijjani Adam, C.M. Hasfalina, Faridah. S, Zamri. I, U.Hashim & Shahrul A. B Ariffin, 2014, Reviewed

Immunosensor Format Using Nanomaterial for Tungro Virus Detection, Advances Materials Research, 832(2014), pp 410-

414

4. Vudagandla Sreenivasulu, Nadavala Sivakumar, Hasfalina Che Man & Abburi Krishnaiah, 2014, Method Development and

Validation for Quantitative Determination of 2-Acetoxy Methyl-4-Methoxy-3,5-Dimenthyl Pyridine, in Esomeprazole

Magnesium (API) Active Pharmaceutical Ingredient by LC-ESI-MS/MS, Journal of Chemical and Pharmaceutical Research,

6(5), pp 1014-1021

5. Abdul Shukor Abdul Aziz, Latifah Abdul Manaf, Hasfalina Che Man & Nadavala Siva Kumar, 2014, Kinetic Modeling and

Isotherm Studies for Copper(II) Adsorption onto Palm Boiler Mill Fly Ash (POFA) as a Natural Low-Cost Adsorbent,

BioResources, 9(1), pp 336-356, I.F. 1.379

6. Ramin Shamsiri & Wan Ishak Wan Ismail, 2014, Implementation of Galerkin's Method and Modal Analysis for Unforced

Vibration Response of a Tractor Suspension Model, Research Journal of Applied Sciences, Engineering and Technology,

7(1), pp 49-55

7. Ramin Shamsiri & Wan Ishak Wan Ismail, 2014, A Comprehensice Comparison between Wave Propagation and Heat

Distribution via Analytical Solutions and Computer Simulations, Research Journal of Applied Sciences, Engineering and

Technology, 7(1), pp 111-122.

8. Muhamad Saufi Mohd Kassim, Wan Ishak Wan Ismail & Lim Ho Teik, 2014, Oil Palm Fruit Classifications by using Near

Infrared Images, Research Journal of Applied Sciences, Engineering and Technology, 7(11), pp 2200-2207

9. Siti Sharifah Bibi Hanibah, Siti Khairunniza-Bejo, Wan Ishak Wan Ismail & Aimrun Wayayok, 2014, Determination of

Physical Rice Composition using Image Processing Technique, Journal of Food, Agriculture & Environment, 12(1), pp 205-

209, I.F. 0.517

10. Saberioon, M.M., Amin, M.S.M, Anuar, A.R., Gholizadeh, A. Wayayok, A. & Khairunniza-Bejo, S., 2014, Assessment of Rice

Leaf Chlorophyl Content using Visible Bands at Different Growth Stages at Both the Leaf and Canopy Scale, International

Journal of Applied Earth Observation and Geoinformation, 32(2014), pp 35-45, I.F. 2.176

11. Farid, M., Khairunniza-Bejo, S. & Azman, A., 2014, An Approach to Estimate Moisture Content of Paddy Rice via Thermal

Imaging, Journal of Food, Agriculture & Environment, 12(1), pp 188-191, I.F. 0.517

12. Khairunniza-Bejo, S. & Kamaruddin, S., 2014, Determination of Chokanan Mango Sweetness (Mangifera Indica) using

Non-Destructive Image Processing Technique, Australian Journal of Crop Science, 8(4), pp 475-480.

13. Khairunniza-Bejo, S. & Nor, M.S, 2014, Mature and Immature Paddy Identification using Image Processing Technique,

Journal of Engineering Science and Technology, 9(3), pp 326-333

14. Norhashila Hashim, Rimfiel B. Janius, Russly Abdul Rahman, Azizah Osman, Mahendran Shitan, Manuela Zude, 2014,

Changes of Backscattering Parameters during Chilling Injury in Bananas, Journal of Engineering Science and Technology,

9(3), pp 314-325

15. Zubairu, Usman Bashar, Aimrun Wayayok, & Amin Mohd Soom Mohd, 2014, Determination of some Physical Properties of

Common Malaysia Rice MR219 Seeds, Australian Journal of Crop Science, 8(3), pp 332-337

16. Faranak Ghobadifar, Aimrun Wayayok, Shattri Mansor & Helmi Zulhaidi Shafri, 2014, Effects of Crop Evapotranspiration

Estimation Technique and Weather Parameters on Rice Crop Water Requirement, Australian Journal of Crop Science, 8(4),

pp 495-501

17. Zubairu Usman Bashar, Aimrun Wayayok, & Amin M. S. M. & Razif M. Mahadi, 2014, Comparison of Precision Farming and

Conventional Practices for Paddy Fertilizer Management, Bothalia Journal, 44(4), pp 15-27, I.F. 0.846

18. R. E. Putri, A. Yahya, N. M. Adam, S. Abd Aziz and T. A. Ishola, 2014, Calibration and Accuracy Determination of a

Microwave Type Sensor for Measuring Grain Flow, Journal of Advanced Materials Research, 931-932(2014), pp 1592-1596

19. P. A. Adeoye, C. M. Hasfalina, M. S. M. Amin, A.M. Thamer & C. O. Akinbile, 2014, Environmental Implication of Poultry

Waste Generation and management Techniques in Minna, Semi-arid Region of Nigeria, Annual Research & Review in

Biology, 4(10), pp 1669-1681

20. Siti Khairunniza-Bejo, Samihah Mustaffha, Wan Ishak Wan Ismail, 2014, Application of Artificial Neural Network in

Predicting Crop Yield: A Review, Journal of Food Science and Engineering, 4(2014), pp 1-9

21. Pardis Fazli, Hasfalina Che Man, Mohamed Azwan, Umi Kalsom Md. Shah, Nor Aini Abdul Rahman, Azni Idris, 2014,

Evaluation of Methane Oxidizer Bacteria in the Rice Soil in Malaysia, International Journal of Enhanced Research in Science

Technology & Engineering, 3(3), pp 360-367

22. Tengku Roslina Tuan Yusof, Hasfalina Che Man, Nor Aini Abdul Rahman & Halimatun Saadiah Hafid, 2014, Optimization of

Methane Gas Production from Co-digestion of Food Waste and Poultry Manure using Artificial Neural Network and

Response Surface Methodology, Journal of Agricultural Science, 6(6), pp 27-37

10


23. Bala Ibrahim & Wan Ishak Wan Ismail, 2014, Development of System Rice Intensification (SRI) Paddy Transplanter, Asian

Journal of Agricultural Sciences, 6(2), pp 48-53

24. Zubairu Usman Bashar, Aimrun Wayayok, & Amin M. S. M. & Razif M. Mahadi, 2014, Quality Seed: An Innovative Sorting

Technique to Sustainable, Uniform and Effective Seedling Establishment in Nursery for System of Rice Intensification,

Journal of Agricultural Science, 6(7), pp 185-193

25. P. A. Adeoye, C. M. Hasfalina, M. S. M. Amin, A.M. Thamer & C. O. Akinbile, 2014, Environmental Implication of Poultry

Waste Generation and management Techniques in Minna, Semi-arid Region of Nigeria, Annual Research & Review in

Biology, 4(10), pp 1669-1681

26. Siti Khairunniza-Bejo, Samihah Mustaffha, Wan Ishak Wan Ismail, 2014, Application of Artificial Neural Network in

Predicting Crop Yield: A Review, Journal of Food Science and Engineering, 4(2014), pp 1-9

27. Pardis Fazli, Hasfalina Che Man, Mohamed Azwan, Umi Kalsom Md. Shah, Nor Aini Abdul Rahman, Azni Idris, 2014,

Evaluation of Methane Oxidizer Bacteria in the Rice Soil in Malaysia, International Journal of Enhanced Research in Science

Technology & Engineering, 3(3), pp 360-367

28. Tengku Roslina Tuan Yusof, Hasfalina Che Man, Nor Aini Abdul Rahman & Halimatun Saadiah Hafid, 2014, Optimization of

Methane Gas Production from Co-digestion of Food Waste and Poultry Manure using Artificial Neural Network and

Response Surface Methodology, Journal of Agricultural Science, 6(6), pp 27-37

29. Bala Ibrahim & Wan Ishak Wan Ismail, 2014, Development of System Rice Intensification (SRI) Paddy Transplanter, Asian

Journal of Agricultural Sciences, 6(2), pp 48-53

30. Zubairu Usman Bashar, Aimrun Wayayok, & Amin M. S. M. & Razif M. Mahadi, 2014, Quality Seed: An Innovative Sorting

Technique to Sustainable, Uniform and Effective Seedling Establishment in Nursery for System of Rice Intensification,

Journal of Agricultural Science, 6(7), pp 185-193

31. Hamzah, M.H., Che Man, H., Abidin, Z.Z., Jamaludin, H., 2014, Comparison of citronella oil extraction methods from

Cymbopogon nardus grass by ohmic-heated hydro-distillation, hydro-distillation, and steam distillation, BioResources, 9(1),

pp 256-272, I.F. 1.309

32. Md. Akhir, H., Ahmad, D., Rukunudin, I. H., Shamsuddin, S. & A. Yahya, 2014, Design and Development of a sweet Potato

Digging Device, Pertanika Journal of Science & Technology, 22(1), pp 43-53

33. Diyana Jamaludin., Ahmad, D., Rezuwan Kamaruddin & Hawa Z. E. Jaafar, 2014, Microclimate inside a Tropical

Greenhouse Equipped with Evaporative Cooling Pads, Pertanika Journal of Science & Technology, 22(1), pp 243-259

34. Mohammad Reza Bakhtiari, Omid Ghahraei, Desa Ahmad, Ali Reza Yazdanpanah, Ali Mohammad Jafari, 2014, Selection

of Fertilization Method and Fertilizer Application Rate on Corn Yeild, Agricultural Engineering International: CIGR Journal,

16(2), pp 10-14

35. Ishola, T. A. Yahya, A., Shariff, A. R. M., Aziz, S. A., 2014, A Novel Variable Rate Pnuematic Fertilizer Application,

Instrumentation Science and Technology, 42(4), pp 369-384

36. El Pebrian, D., Yahya, A., Siang, T. C., 2014, Workers' Workload and Productivity in Oil Palm Cultivation in Malaysia,

Journal of Agricultural Safety and Health, 20(4), pp 235-254

37. C. H. Fizura, S. Abd Aziz, S. Hafizan, 2014, Effect of Diesel Contamination on Capacitance Values of Crude Palm Oil,

Journal of Engineering Science and Technology, 9(3), pp 286-292

38. M.M. Saberioon, M.S.M. Amin, A.R. Anuar, A. Gholizadeh, A. Wayayok, 2014, Assessment of Rice Leaf Chlorophyll

Content using Visible Bands at Different Growth Stages at Both the Leaf and Canopy Scale, International Journal of Applied

Earth Observation and Geoinformation, 32(2014), pp 35-45, I.F. 2.539

39. M. K. Rowshon, M. S. M. Amin, M. A. Mojid, M. Yaji, 2014, Estimated Evapotranspiration of Rice Based on Pan

Evaporation as a Surrogate to Lysimeter Measurement, Paddy Water Environment, 12(2014), pp 35-41

40. M. K. Rowshon, M.M. Mbaruk, Martin J. Marriott, M. S. M. Amin, Amimul Ahsan, Eric W.K. Loh, 2014, Geospatial Water

Quality Assessment System for the Sungai Buloh River Basin in Malaysia, International Journal of Water, 8(4), pp 401-421

41. Amer N. N. Kakahy, D. Ahmad, Md. Akhir, 2014, Effects of Mower Speeds on Vine Pulverization, International Journal of

Science, Engineering and Technology Research, 3(9), pp 2285-2289

42. Abdullahi Abubakar Sadiq, Sunusi Abubakar Amin, Desa Ahmad, Baba Gana Umara, 2014, Characteristics of Irrigation

Tube Wells on Major River Flood Plains in Bauchi State, Nigeria, Ambiente & Agua - An Interdisciplinary Journal of Applied

Science, 9(4), pp 602-609

43. Hassan Yeganeh, Seyed Jamale Khajedein, Fazel Amiri & A R M Shariff, 2014, Monitoring Rangeland Ground Cover

Vagetation using Multitemporal MODIS Data, Arabian Journal of Geoscience, 7(1), pp 287-298

44. Rabar Fatah Salih, Khalina Abdan & Aimrun Wayayok, 2014, Growth Response of Two Kenaf Varieties (Hibiscus

Cannabinus L.) Apllied by Different Levels of Potassium, Boron & Zinc, Journal of Agricultural Science, 6(9), pp 37-45

45. M. K. Rowshon, M. A. Mojid M. S. M. Amin, M. Azwan & M. Yazid, 2014, Improving Irrigation Water Delivery Performance of

a Large-scale Rice Irrigation Scheme, Journal of Irrigation and Drainage Engineering, 140(8)

11


JABATAN KEJURUTERAAN ELEKTRIK DAN ELEKTRONIK

1. M.Fadaeenejad, A.M. Saberian, Mohd Fadaee, M. A. M. Radzi, H. Hizam, M.Z.A. AbKadir, 2014, The Present and Future of

Smart Power Grid in Developing Countries, Renewable and Sustainable Energy Reviews, 29(2014), pp 824-834, I.F. 5.627

2. M. Fadaeenejad, R. Shamsipour, S.D. Rokni, C. Gomes, 2014, New Approaches in Harnessing Wave Energy: with special

attention to small islands, Renewable and Sustainable Energy Reviews, 29(2014), pp 345-354, I.F. 5.627

3. M. Fadaeenejad, M. A. M. Radzi, M. Z. A. AbKadir, H. Hizam, 2014, Assessment of Hybrid Renewable Power Sources for

Rural Electrification in Malaysia, Renewable and Sustainable Energy Reviews, 30(2014), pp 299-305, I.F. 5.627

4. Norhisam Misron, Noor Hasmiza Harun, Yeoh Kian Lee, Roslina Mohd Sidek, Ishak Aris, Hiroyuki Wakiwaka, Kunihisa

Tashiro, 2014, Improvement in Sensitivity of an Inductive Oil Palm Fruit Sensor, Sensors, 14(2), pp 2431-2448, I.F. 1.953

5. Veeraiyah Thangasamy, Noor Ain Kamsani, Mohd Nizar Hamidon, Muhammad Faiz Bukhori, 2014, An Overview of RF

Power Amplifier Techniques and Effect of Transistor Scaling on its Design Parameters, International Journal of Applied

Engineering Research, 9(2), pp 257-276.

6. Muhammad Ammirul Atiqi Mohd Zainuri, Mohd Amran Mohd Radzi, Azura Che Soh, Nasrudin Abd Rahim, 2014,

Development of Adaptive Perturb and Observe-Fuzzy Control Maximum Power Point Tracking for Photovoltaic Boost DC-

DC Converter, IET Renewable Power Generation, 8(2), pp 183-194, I.F. 1.718

7. Nasim Heidari Bateni, Mohd Nizar Hamidon, Khairul Amin Matori, 2014, Effect of Soda-lime-silica glass addition on the

physical properties of ceramic obtained from white rice husk ash, Journal of the Ceramic Society of Japan, 122(2), pp 161-

165, I.F. 0.94

8. Veeraiyah Thangasamy, Noor Ain Kamsani, Mohd Nizar Hamidon, Nasri Sulaiman, Muhammad Faiz Bukhori, 2014, Q and

Frequency Tunable Second Order LC Bandpass Filter for Long Term Evolution (LTE) Receiver, Mitteilungen

Klosterneuburg, 64(3), pp 234-245, I.F 0.032

9. Mohammad Reza Shokrani, Mojtaba Khoddam, Mohd Nizar Hamidon, Noor Ain Kamsani, Fakhrul Zaman Rokhani, Suhaidi

Shafie, 2014, An RF Energy Harvester System Using UHF Micpower CMOS Rectifier Based on a Diode Connected CMOS

Transistor, The Scientific World Journal, 2014(2014), pp 1-11, I.F. 1.73

10. Farhad Larki, Arash Dehzangi, Sawal Hamid Md Ali, Azman Jalar, Md Shabiul Islam, Mohd Nizar Hamidon, Burhanuddin

Yeop Majlis, 2014, Effect of Geometric Parameters on the Performance of P-Type Junctionless Lateral Gate Transistors,

PLOS ONE, 9(4), pp 1-9, I.F. 3.73

11. Norhafiz Azis, Jasronita Jasni, Mohd Zainal Abidin Ab Kadir, Mohd Nazim Mohtar, 2014, Sitability of Palm Based Oil as

Dielectric Insulating Fluid in Transformers, Journal of Electrical Engineering & Technology, 9(2), pp 662-669, I.F. 0.725

12. N. Azis, Q. Liu, Z. D. Wang, 2014, Ageing Assessment of Transformer Paper Insulation Through Post Mortem Analysis,

IEEE Transaction on Dielectrics and Electrical Insulation, 21(2), pp 845-853, I.F. 1.36

13. S. Zahurul, N. Mariun, V. Grozescu, M. Lutfi, H. Hashim, M. Amrana, Izham, 2014, Development of A Prototype For Remote

Current Measurements of PV Panel Using WSN, International Journal of Smart Grid and Clean Energy, 3(2), pp 241-246

14. Arash Toudeshki, Norman Mariun, Hashim Hizam and Noor Izzri Abdul Wahab, 2014, Development of a New Cascade

Voltage-Doubler for Voltage Multiplication, Chinese Journal of Engineering, 2014(2014), pp 1-6

15. Ojo O. Adedayo, M. M. Isa, A. Che Soh and Z. Abbas, 2014, Multi-Adaptive Neuro-Fuzzy Inference System For Dielectric

Properties of Oil Palm Fruitlets, International Jornal of Applied Science and Engineering, 12(1), pp 1-8

16. S. Zahurul, N. Mariun, V. Grozescu, M. Lutfi, H. Hashim, M. Amrana, Izham, 2014, Development of A Prototype For Remote

Current Measurements of PV Panel Using WSN, International Journal of Smart Grid and Clean Energy, 3(2), pp 241-246

17. Arash Toudeshki, Norman Mariun, Hashim Hizam and Noor Izzri Abdul Wahab, 2014, Development of a New Cascade

Voltage-Doubler for Voltage Multiplication, Chinese Journal of Engineering, 2014(2014), pp 1-6

18. Ojo O. Adedayo, M. M. Isa, A. Che Soh and Z. Abbas, 2014, Multi-Adaptive Neuro-Fuzzy Inference System For Dielectric

Properties of Oil Palm Fruitlets, International Journal of Applied Science and Engineering, 12(1), pp 1-8

19. De Xing Lioe, Suhaidi Shafie, Harikrishnan Ramiah, and Gim Heng Tan, 2014, Low Power Upconversion Mixer for Medical

Remote Sensing, The Scientific World Journal , 2014(2014), pp 1-5

20. Mohd Hafiz B. Mohd Nordin, Mohd Khair B. Hassan, Azura Bt. Che Soh and Mohd. Amran B. Mohd. Radzi, 2014,

Hardware-In-Loop of Fault Detection System for Air-Fuel Ratio Control, Applied Mechanics and Materials, 663(2014), pp

233-237

21. Samad Shirzadi, H.Hizam, Noor Izzri Abdul Wahab, 2014, Mismatch Losses Minimization in Photovoltaic Arrays by

Arranging Modules Applying a Genetic Algorithm, Solar Energy, 108(2014), pp 467-478, I.F. 3.541

22. Mahdi Karami, Norman Mariun, Mohammad Rezazadeh Mehrjou, Mohd Zainal Abidin Ab Kadir, Norhisam Misron, and

Mohd Amran Mohd Radzi, 2014, Static Eccentricity Fault Recognition in Three-Phase Line Start Permanent Magnet

Synchronous Motor Using Finite Element Method, Mathematical Problems in Engineering, 2014(2014), pp 1-12, I.F. 1.082

23. Nasim Sobhani, Farzin Piltan, Maryam Rahmani, Farzin Matin, Hamid Cheraghi, and Nasri Sulaiman, 2014, Precision

Improvement Based on Intelligent Hype-plane Computed Torque Control, International Journal of Artificial Intelligence and

Applications for Smart Devices, 2(2), pp 9-22

24. M. Izadi, M. Z. A. Ab. Kadir, V.Cooray, M. Hajikhani, 2014, Estimation of Lightning Current and Return Stroke Velocity

Profile Using Measured Electromagnetic Fields, Electric Power Components and Systems, Vol.42, No. 2, pp. 103-111

12


25. Rezaee Jordehi, A., Jasni, J.,Abd Wahab, N., Kadir, M.Z.,Javadi, M.S., 2014, Enhanced leader PSO (ELPSO): A new

algorithm for allocating distributed TCSC's in power systems, International Journal of Electrical Power and Energy Systems,

Vol 64, pg. 771-784

26. Izadi, M., Ab Kadir, M.Z.A.,Hajikhani, M., 2014, An Algorithm for Evaluation of Lightning Electromagnetic Fields at Different

Distances with Respect to Lightning Channel, Mathematical Problems in Engineering, Vol 2014

27. Izadi, M., Ab Kadir, M.Z.A.,Hajikhani, M., 2014, On the Lightning Induced Voltage along Overhead Power Distribution Line,

Journal of Electrical Engineering and Technology, Vol 9, No. 5, pg. 1694-1703

28. Izadi, M., Ab Kadir, M.Z.A.,Hajikhani, M., 2014, Considering on Lightning Electric Fields in Presence of Ground Reflection

at Non-Perfect Ground, Journal of Electrical Engineering, Vol 65, No. 4, pg. 242-247

29. Izadi, M., Ab Kadir, M.Z.A.,Hajikhani, M., 2014, Evaluation of Lightning Current and Ground Reflection Factor using

Measured Electromagnetic Field, Applied Computational Electromagnetics Society Journal, Vol. 29, No. 1, pg. 107-115

30. Askari, M.T., Ab Kadir, M.Z.A., Hizam, H., Jasni, J., 2014, A New Comprehensive Model to Simulate the Restructured

Power Market for Seasonal Price Signals by Considering on the Wind Resources, Journal of Renewable and Sustainable

Energy, Vol. 6, No. 2

31. A. AL-Masri, M. Z. A. Ab Kadir, H. Hizam, N. Mariun, 2014, Simulation of an Adaptive Artificial Neural Network for Power

System Security Enhancement Including Control Action, Applied Soft Computing Journal , Vol. 29, pg. 1-11

32. Ojo O. Adedayo, M.M. Isa, A. Che Soh, Z. Abbas, 2014, Comparison of Feed Forward Neural Network Training Algorithms

for Intelligent Modeling of Dielectric Properties of Oil Palm Fruitlets, International Journal of Engineering and Advanced

Technology, Vol. 3, No. 3,pg. 39-42

33. M. Ahadi, M. M. Isa, M. I. Saripan, W. Z. W. Hasan, 2014, Square Monopole Antenna for Microwave Imaging, Design and

characterisation, IET Microwaves, Antennas & Propagation, Vol. 9, No. 1, pg. 49-57

13


JABATAN KEJURUTERAAN KIMIA DAN ALAM SEKITAR

1. Ahmad, A.A., Idris, A., Hameed, B.H., 2014, Modeling of disperse dye adsorption onto bamboo-based activated carbon in

fixed-bed column, Desalination and Water Treatment, 52(1-3), pp 248-256, I.F. 0.852

2. Roshanida A. Rahman, Abul Hossain Molla and Fakhru’l-Razi, A., 2014, Assessment of sewage sludge bioremediation at

different hydraulic retention times using mixed fungal inoculation by liquid-state bioconversion, Environ Sci Pollut Res,

21(2014), pp 1178-1187, I.F. 2.168

3. Solomon O. Giwa, Luqman A. Chuah, Nor M. Adam, 2014, Fuel properties and rheological behavior from egusi

(Colocynthis citrullus L.) seed kernel oil, Fuel Processing Technology, 122(3), pp 42-48, I.F. 2.816

4. F. Mirjalili, L. Chuah and E. Salahi, 2014, Mechanical and Morphological Properties of Polypropylene/Nano α-Al2O3

Composites, The Scientific World Journal, 2014(2014), pp 1-12, I.F. 1.73

5. Nor Fariza, Luqman Chuah A, Pin KY, Dayang Radiah AB, Umi Kalsom Yand Adawiah I , 2014, Optimisation of Extraction

of Phaleria Macrocarpa Leaves, Medicinal & Aromatic Plants, 3(1), pp 149

6. Mohammed Yusuf, Luqman Chuah, Moonis Ali Khan, Soraya Hosseini, Thomas S.Y. Choong, 2014, Adsorption of nickel

on electric arc furnace slag: batch and column studies, Separation Science and Technology, 49(3), pp 388-397, I.F. 1.164

7. Rafeah Wahi, Luqman Chuah Abdullah, Thomas Choong Shean Yew, Zainah Ngaini, Mohsen Nourouzi Mobarekeh, 2014,

Esterification of sagu bark as an adsorbent for removal of emulsified oil, J. Environmental Chemical Engineering, 2(2014),

pp 324-331

8. Maryam Jokar, Russly Abdul Rahman, Luqman Chuah Abdullah, 2014, Physical and Antimicrobial Characterization of Self

Assembled Silver nanoparticle/chitosan onto Low Density Polyethylene Film as Active Packaging Polymer, Journal of Nano

Research, 27(2014), pp 53-64, I.F. 0.341

9. Nayeri, M. D., Tahir, P. M., Jawaid, M., Ashaari, Z., Abdullah, L. C., Bakar, E. S., and Namvar, F., 2014, Medium density

fibreboard made from kenaf (Hibiscus cannabinus L.) stem: Effect of thermo-mechanical refining and resin content,

BioResources, 9(2), pp 2372-2381, I.F. 1.328

10. Rashid, U., Ahmad, J., Yunus, R., Ibrahim, M., Masood, H., Syam, A.M., 2014, Momordica Charantia seed oil methyl esters:

A kinetic study and fuel properties, International Journal of Green Energy, 11(7), pp 727-740, I.F. 2.069

11. Rashid, U., Knothe, G. , Yunus, R., Evangelista, R.L., 2014, Kapok oil methyl esters, Biomass & Bioenergy, 66 (2014), pp

419-425, I.F. 2.975

12. Muhamad Roddy Ramli, Siew Wai Lin, Luqman Chuah Abdullah, and Thomas Choong Shean Yaw, 2014, Fractionation of

Palm Kernel Oil by Short Path Distillation, Journal of Food Science and Engineering, 4(2014), pp 82-95

13. Nima Zohdi, Fariba Mahdavi, Luqman Chuah Abdullah and Thomas SY Choong, 2014, Removal of boron from aqueous

solution using magnetic carbon nanotube improved with tartaric acid, Journal of Environmental Health Science &

Engineering, 12(3), I.F. 1.230

14. Mustafa, I.H., Elkamel, A., Lohi, A., Ibrahim, G., Elnashaie, S.S.E.H., 2014, Structured mathematical modeling, bifurcation,

and simulation for the bioethanol fermentation process using Zymomonas mobilis, Industrial and Engineering Chemistry

Research, 53(14), pp 5954-5972, I.F. 2.206

15. Abashar, M.E.E., Elnashaie, S.S.E.H., 2014, Investigation of multistage circulating fast fluidized bed membrane reformers

for production of ultraclean hydrogen and syngas, Industrial and Engineering Chemistry Research, 53(12), pp 4565-4579,

I.F. 2.206

16. Nabeel S. Abo-Ghandera, Filip Logistb, John R. Gracea, Corresponding author contact information, E-mail the

corresponding author, Jan F.M. Van Impeb, Said S.E.H. Elnashaiea, C. Jim Lima, 2014, Heterogeneous modeling of an

autothermal membrane reactor coupling dehydrogenation of ethylbenzene to styrene with hydrogenation of nitrobenzene to

aniline: Fickian diffusion model, Chemical Engineering and Processing: Process Intensification, 77(2014), pp 50-65, I.F. 1.95

17. Hiroyuki Yoshida, Shamsul Izhar, Eiichiro Nishio, Yasuhiko Utsumi, Nobuaki Kakimori, Salak Asghari Feridoun, 2014,

Recovery of indium from TFT and CF glasses in LCD panel wastes using sub-critical water, Solar Energy Materials & Solar

Cells, 125(2014), pp 14-19, I.F. 4.630

18. Hiroyuki Yoshida, 2014, Reproduction and Use, Japan Sewage Works Association, 38(2014), pp 142

19. Nami Y, Abdullah N., Haghshenas B., Radiah D. A.B., Rosli R. and Yari Khosroushahi A., 2014, Probiotic potential and

biotherapeutic effects of newly isolated vaginal Lactobacillus acidophilus 36YL strain on cancer cells, Anaerobes, 28(2014),

pp 29-36, I.F. 2.022

20. Sivapragasam M and Abdullah N, 2014, Purification of Glutathione S-transferase (GST) using Mixed Mode Chromatograph,

International Journal of Engineering Research & Technology (IJERT), 3(2), pp 1292-1299, I.F. 1.76

21. Samavati R, Abdullah N, Tahmasbi Nowtarki K., Hussain, S.A. and Awang Biak D.R, 2014, The Prospect of Utilizing a

Cassava Derivative (Fufu) as a Fluid Loss Agent in Water based Drilling Muds, International Journal of Chemical

Engineering, 5(20), pp 161-169

22. Bidita, B.S., Aien, N., Suraya, A.R., Mohd Salleh, M.A., Idris, A., 2014, Effect of Experimental Variables on the Combustion

Characteristics of Water-in-Diesel Emulsion Fuels, Journal of Dispersion Science and Technology, 35(2), pp 185-192, I.F.

0.600

23. Bidita, B.S., Aien, N., Suraya, A.R., Mohd Salleh, M.A., Idris, A., 2014, Emission characteristics of water in diesel

nanoemulsions in diesel engine, Advanced Materials Research, 832(2014), pp 248-253

14


24. Koay, Y.S., Ahamad, I.S., Mohsen Nourouzi, M. And Chuah, T.G., 2014, Ion-exchange Adsorption of Reactive Dye Solution

onto Quaternized Palm Kernel Shell, Journal of Applied Sciences, 14(12), pp 1314-1318

25. Koay, Y.S , Ahamad, I.S., Nourouzi, M.M., Abdullah, L.C., Choong, T.S.Y., 2014, Development of novel low-cost quaternized

adsorbent from palm oil agriculture waste for reactive dye removal , BioResources, 9(1), I.F. 1.309

26. Hussain, S.A., Bano, S., Yeoh, H.S., Rozita, O., 2014, Simulation on temperature distribution of oil palm empty fruit bunches

during the microwave pyrolysis process, Asia-Pacific Journal of Chemical Engineering, 9(1), pp 39-49, I.F. 0.797

27. I.M. Nasir, T.I. Mohd Ghazi, R. Omar, and A. Idris, 2014, Bioreactor performance in anaerobic digestion of cattle manure,

ISSN: 1556-7036, Energy Sources Part A-Recovery Utilization and Environmental Effects, 36(2014), pp 1476-1483, I.F.

0.516

28. May Ying Koh, Tinia Idaty Mohd. Ghazi, Azni Idris, 2014, Synthesis of palm based biolubricant in an oscillatory flow reactor

(OFR), Industrial Crops and Products, 52(2014), pp 567-574, I.F. 2.468

29. Hosseini, S., Eftekhari, E. Masoudi Soltani, S., Babadi, F.E., Minggu, L.J., Ismail, M.H.S., 2014, Synthesis, characterization

and performance evaluation of three-layered photoanodes by introducing a blend of WO3 and Fe2O 3 for dye degradation,

Applied Surface Science, 289(15), pp 53-61, I.F. 2.112

30. Zurina Z. Abidin, Fatin N. Omar, Dayang R. A. Biak, Pavithiran Yogarajah, Yaakob C. Man., 2014, Dielectric characterization

of Liquid Containing Low Alcoholic Content for Potential Halal Authentication in the 0.5 - 50 GHz range, American Journal of

Applied Science, 11(7), pp 1104-1112

31. Zurina Z. Abidin, Fatin N. Omar, Dayang R. A. Biak, Yaakob C. Man., 2014, Dielectric characterization of Ethanol and

Sugar Aqueous Solutions for potential halal authentication, International Journal of Microwave and Optical Technology, 9(1),

pp 39

32. Zurina Zainal Abidin, Mohd Fadzli Mohamed, Abdul Ghani Liew Abdullah, 2014, Premilinary study of Rambutan

(Nephelium Lappaceum) Seed as Potential Biocoagulant for Turbidity Removal, Advanced Materials Research, 917(2014),

pp 96-105

33. Abidin, Z.Z., Mohd Salleh, M.A., Harun, M.Y., Abu Bakar, N., 2014, Biosorption of Zn (II) from aqueous solution by jatropha

curcas press cake, Journal of Scientific and Industrial Research, 73(3), pp 191-194, I.F. 0.505

34. Balavandy, S.K., Shameli, K , Biak, D.R.B.A., Abidin, Z.Z., 2014, Stirring time effect of silver nanoparticles prepared in

glutathione mediated by green method, Chemistry Central Journal, 8(1), pp 13, I.F. 1.312

35. Harun, R., Yip, J.W.S., Thiruvenkadam, S., Ghani, W.A.W.A.K., Cherrington, T., Danquah, M.K., 2014, Algal biomass

conversion to bioethanol-a step-by-step assessment, Biotechnology Journal, 9(1), pp 73-86, I.F. 3.446

36. Razif Harun, Michael K. Danquah,and Selvakumar Thiruvenkadam, 2014, Particulate Size of Microalgal Biomass Affects

Hydrolysate Properties and Bioethanol Concentration, BioMed Research International, 2014(2014), pp 1-8, I.F. 2.88

37. Omar, R. , Robinson, J.P, 2014, Conventional and microwave-assisted pyrolysis of rapeseed oil for bio-fuel production,

Journal of Analytical and Applied Pyrolysis, 105(2014), pp 131-142, I.F. 2.56

38. Mohd Amirul Syafiq Mohd Yunos, Siti Aslina Hussain, Hamdan Mohamed Yusoff, 2014, Preparation and quantification of

radioactive particles for tracking hydrodynamic behavior in multiphase reactors, Applied Radiation and Isotopes, 91(2014),

pp 57-61, I.F. 1.179

39. Siti Aslina Hussain, Tan Hong Tat and Azni Idris, 2014, Numerical Study of Fluid flow across multiple Cosmo ball, Int. J.

Nano and Biomaterials, 5(1), pp 89-102

40. Nurfatimah Bakar,Ching Yern Chee, Luqman Chuah Abdullah, Chantara Thevy Ratnam, Nor Azowa, 2014, Effect of

Methyl Methacrylate Grafted Kenaf on Mechanical Properties of Polyvinyl Chloride/Ethylene Vinyl Acetate Composites,

Composites: Part A Applied Science and Manufacturing, 63(2014), pp 45-50, I.F. 2.744

41. Muhamad Roddy Ramli, Siew Wai Lin, Luqman Chuah Abdullah, and Thomas Choong Shean Yaw, 2014, Fractionation of

Palm Kernel Oil by Short Path Distillation, Journal of Food Science and Engineering, 4(2014), pp 82-95

42. Farhad Ostovan, Khamirul Amin Matori, Hamdan Mohamed Yusoff, Robiah Yunus, Azmah Hanim Mohamed Ariff,

Meysam Toozandehjani, Firouz Fadaeifard, Mohammad Reza Meschian, 2014, Occurrence of Pattern Formation of

Microstructural, Physical and Mechanical Properties of Sintered PM Steels Containing Pre-Alloyed Astaloy E Powder,

Transactions of the Indian Institute of Metals, 67(6), pp 881-888

43. Min Min Aung, Zahira Yaakob, Siti Kamarudin, Luqman Chuah Abdullah, 2014, Synthesis and Characterization of Jatropha

(Jatropha curcas L) oil-based polyurethane wood adhesive, Industrial Crops and Products, 60(2014), pp 177-185, I.F. 3.208

44. R. Rafiee-Moghaddam, J. Salimon, M.J. Haron, H. Jahangirian, M.H.S.Ismail, L.Afsah-Hejri, N.Vafaei, Y.Tayefehchamani,

2014, Application of Methyl fatty Hydroxamic Acids Based on Jathropha Curcas Seed Oil and Their Metal Complexes as Anti

Microbial Agents, Digest Journal of Nanomaterials and Biostructures, 9(1), pp 261-271, I.F. 1.123

45. R. Rafiee-Moghaddam, J. Salimon, M.Jelas Haron, H. Jahangirian, M.H.S.Ismail, S. Hosseini, M. Rezayi, 2014, Lipase

Epoxidation Optimizing of Jatropha Curcas Oil using Perlauric Acid, Digest Journal of Nanomaterials and Biostructures, 9(3),

pp 1159-1169, I.F. 1.123

46. Mohd Lias Kamal, Jamil Tajam, Sharizal Hasan, Mohd Halim Shah Ismail, Anies Suhaida Mohd Naspu, Nur Saliza Awatif

Zahala, 2014, A performance of hybrid biosorbent 'M-Bios' of Pb(II) and Cu(II) in aqueous solutions, International Journal of

Scientific and Research Publications, 4(7), pp 1-8

47. Zahra M. Esfahan, Soheil Nekoui, Mohd Halim Shah bin Ismail, Hamed Pourzolfaghar, 2014, Enhancement of

Biodegradable Polymer Properties by Physical and Chemical Revisited Method, International Journal of Chemical and

Environmental Engineering, 5(1), pp 18

15


48. Hamed-Pourzolfaghar, Mohd Halim-Shah Ismail, Shamsul-Izhar, Zahra-Maghareh Esfahan, 2014, Review of H2S Sorbents

at Low-Temperature Desulfurization of Biogas, International Journal of Chemical and Environmental Engineering, 5(2), pp

22

49. Fakhru'l-Razi, A., Peyda, M., Ab Karim Ghani, W.A.W., Abidin, Z.Z., Zakaria, M.P., and Moeini, H., 2014, Modeling of crude

oil biodegradation using two phase partitioning bioreactor, Biotechnology Progress, 30(4), pp 797-805, I.F. 1.883

50. C.K. Howa, Moonis Ali Khanb, Corresponding author contact information, E-mail the corresponding author, E-mail the

corresponding author, Soraya Hosseinia, T.G. Chuaha, c, Thomas S.Y. Choonga, c, 2014, Fabrication of mesoporous

carbons coated monolith via evaporative induced self-assembly approach: Effect of solvent and acid concentration on pore

architecture, Journal of Industrial and Engineering Chemistry, 20(6), pp 4286-4292, I.F. 2.063

51. Xiaotian Zhang, Mohd Halim Shah Ismail, Fakhru'l-Razi b. Ahmadun and Norhafizah bt. Hj. Abdullah, 2014, Synthesis and

Analysis of New Non-Corrosive Hot Aerosol Fire Suppression Agent, World Applied Sciences Journal, 32(5), pp 952-963,

I.F. 0.23

52. A. Mohd Azrie, A. Luqman Chuah, K.Y. Pin, and H.P. Tan, 2014, Effect of Solvents on Extraction of Kacip Fatimah (Labisia

Pumila) Leaves, Journal of Chemical and Pharmaceutical Research, 6(9), pp 172-176, I.F. 0.398

53. Chiou Moi Yeoh, Eng Tong Phuah, Teck Kim Tang, Wai Lin Siew, Luqman Chuah Abdullah and Thomas Shean Yaw

choong, 2014, Molecular distillation and characterization of diacyglycerol-enriched palm olein, European Journal of Lipid

Science and Technology, 116(2014), pp 1654-1663, I.F. 2.033

54. Sara, Y.Y., W.A.Amneera, Chuah T.G., Rashid M., Zakarya I.A., 2014, Source Apportionment of Atmospheric Aerosols in

Kuala Lumpur Malaysia, Advances in Environmental Biology, 8(15), pp 265-270

55. Y. Nami, N. Abdullah, B. Haghshenas, D. Radiah, R. Rosli and A. Yari Khosroushahi, 2014, A newly isolated probiotic

Enterococcus faecalis Strain from vagina microbiota enhances apoptosis of human cancer cells, Journal of Applied

Microbiology, 117(2), pp 498-508, I.F. 2.386

16


JABATAN KEJURUTERAAN SISTEM KOMPUTER DAN KOMUNIKASI

1. Che Ahmad Bukhari Che Ujang, Cyrus Jahanchahi, Clive Cheong Took, Danilo P. Mandic, 2014, Adaptive Convex

Combination Approach for the Identification of Improper Quaternion Processes, IEEE Transactions on Neural Networks and

Learning Systems, 25(1), pp 172-182, I.F. 3.766

2. HK Husham, AF Abas, GA Mahdiraji, MA Mahdi, FRM Adikan, 2014, Linewidth Optimization in Fiber Grating Fabry-Perot

Lasers, Optical Engineering, 53(2), pp 1-8, I.F. 0.880

3. Osamah L. Barakat, Shaiful J. Hashim, R.S.A., Abdul Rahman Ramli, Fazirulhisyam Hashim, Khairulmizam Samsudin,

Mahmud Ab Rahman, 2014, Malware analysis performance enhancement using cloud computing, Journal of Computer

Virology and Hacking Techniques, 10(1), pp 1-10

4. Zahraa Dahham, Aduwati Sali, BorhanuddinM. Ali, 2014, An Efficient Backoff Algorithm for IEEE 802.15.4 Wireless Sensor

Networks, Wireless Personal Communications, 75(2014), pp 2073-2088, I.F. 0.428

5. A.A.Zaidan, H.Abdul Karim, N.N.Ahmad, B.B.Zaidan, A.Sali, 2014, A four-phases methodology to propose anti-pornography

system based on neural and bayesian methods of artificial intelligence, International Journal of Pattern Recognition and

Artificial Intelligence, 28(1), pp 1-49, I.F. 0.562

6. A.A.Zaidan, H.Abdul Karim, N.N.Ahmad, B.B.Zaidan, A.Sali, 2014, On themulti-agent learning neuraland Bayesian methods

in skin detector and pornography classifier: An automated anti-pornography system, Neurocomputing, 131(2014), pp 397-

418, I.F. 1.634

7. A.A.Zaidan, H.Abdul Karim, N.N.Ahmad, B.B.Zaidan, A.Sali, 2014 Image skin segmentation based on multi-agent learning,

Engineering Application of Artificial Intelligence, 32(2014), pp 136-150, I.F. 1.625

8. A. K. Mwinyi, S.A.R AL-Haddad, S. J. bin Hashim, and R. bin Hj Abdullah, 2014, Review On Multi-Agent System

Collaboration In Learning Management System Domain By Deploying Wireless Sensor Networks For Student Location

Detection, Journal of Computer Science, 10(6), pp 995-1002

9. Asem Khmag, Abd Rahman Ramli, Syed Abdul Rahman Al-Haddad and Shaiful Jahari Bin Hashim, 2014, Additive and

Multiplicative Noise Removal Based On Adaptive Wavelet Transformation Using Cycle Spinning, American Journal of

Applied Sciences, 11(2), pp 316-328

10. Nurul Fariha Lokman, Ahmad Ashrif A. Bakar, Fatihah Suja, Huda Abdullah,Wan Baihaqi Wan Ab Rahman, Nay-Ming

Huang, Mohd Hanif Yaacob, 2014, Highly sensitive SPR response of Au/chitosan/graphene oxidenanostructured thin films

toward Pb (II) ions, Sensors and Actuators B: Chemical, 195(2014), pp 459-466, I.F. 3.535

11. A.A. Salah, R.S.A. Raja Abdullah, A. Ismail, F. Hashim and N.H. Abdul Aziz, 2014, Experimental study of LTE signals as

illuminators of opportunity for passive bistatic radar applications, Electronics Letters, 50(7), pp 545-547, I.F. 1.038

12. Faisul Arif Ahmad, Abd Rahman b. Ramli, Khairulmizam Samsudin, and Shaiful Jahari Hashim, 2014, Optimization of Power

Utilization in Multi-Mobile Robot Foraging Behavior Inspired by Honeybees System, Scientific World Journal, 2014(2014), pp

1-12, I.F. 1.730

13. Amir Reza Sadrolhosseini, A. S. M. Noor, Mahnaz M. Abdi, Ahmad Fauzi Abas, Mohd. Adzir Mahdi, and Yusser Al-Qazwini,

2014, Application of Conducting Polymer Layer for Measurement of Ag Nanoparticle Concentration Using Surface Plasmon

Resonance, Polymer-Plastics Technology and Engineering, 53(2014), pp 520-525, I.F. 1.481

14. Majid H.Kakaee, Saleh Seyedzadeh, Hilal Adnan Fadhil, Siti Barirah Ahmad Anas, Makhfudzah Mokhtar, 2014,

Development of Multi-Service(MS) for SAC-OCDMA Systems, Optics & Laser Technology, 60(2014), pp 49-55, I.F. 1.365

15. Abbas Mehdizadeh and Fazirulhisyam Hashim, and Mohammed Othman, 2014, Lightweight Decentralized Multicast-

Unicast Key Management Method in Wireless IPv6 Networks, Journal of Network and Computer Applications, 42(2014), pp

59-69, I.F. 1.467

16. Bassam M.S. Waheed, Borhanuddin B. Mohd. Ali, Sabira Khatun and Roslina bt. Mohd. Sidek, 2014, Enhanced Marking

Process (EMP) for Constructing Dominating Set in Mobile Ad-hoc Networks with Unidirectional Links, Asian Journal of

Scientific Research, 7(2), pp 131-146

17. Bassam M.S. Waheed, Borhanuddin B. Mohd Ali, Sabira Khatun and Roslina Bt. Mohd, 2014, Hybrid Low Cost Flooding

Scheme for On-demand Routing Protocols in MANETs, Asian Journal of Scientific Research, 7(2), pp 147-161

18. Ali K. Marzook, A. Ismail, B. M. Ali, A. Sali, S. Khatun, 2014, A new technique for multi-cell joint channel estimation in time

division code division multiple access based on reduced rank singular value decomposition, Wireless Networks, 20(4), pp

759-773, I.F. 0.736

19. Amir Reza Sadrolhosseini, A. S. M. Noor, Afarin Bahrami, H. N. Lim, Zainal Abidin Talib, Mohd. Adzir Mahdi, Application of

Polypyrrole Multi-Walled Carbon Nanotube Composite Layer for Detection of Mercury, Lead and Iron Ions Using Surface

Plasmon Resonance Technique, Plos One, 9(4), pp 1-10, I.F. 3.730

20. N.A. Cholan, M.H. Al-Mansoori, A.S.M. Noor, A. Ismail and M.A. Mahdi, 2014, Switchable and tunable single- and dual-

wavelength erbium-doped fiber laser by four-wave mixing with wide and continuous tenability, Applied Physics B: Lasers and

Optics, 115(2014), pp 251-256, I.F. 1.782

21. N.A. Cholan, M.H. Al-Mansoori, A.S.M. Noor, A. Ismail and M.A. Mahdi, 2014, Formation, properties and role of residual

waves as seeds in multiwavelength Brillouin-erbium fiber laser, Optics Communications, 329(2014), pp 163-167, I.F. 1.438

22. Elfarizanis Baharudin, Alyani Ismail, Adam Reda Hasan Alhawari, Edi Syams Zainudin, Dayang Laila Abang Abdul Majid

and Fauziahanim Che Seman, 2014, Investigation on the Dielectric Properties of Pulverized Oil Palm Frond and Pineapple

Leaf Fiber for X-Band Microwave Absorber Application, Advanced Materials Research, 893(2014), pp 488-491

17


23. Pooria Varahram, Borhanuddin Mohd Ali, Somayeh Mohammady, Nasri Sulaiman, 2014, Power amplifier linearisation

scheme to mitigate superfluous radiations and suppress adjacent channel interference, IET Communications, 8(2), pp 258-

265, I.F. 0.637

24. Rabah A. Ahmed, Khairulmizam Samsudin and Fakhrul Z. Rokhani, 2014, A Framework for System Dependability

Validation under the Influence of Intrinsic Parameters Fluctuation, International Journal of Software Engineering and its

Applications, 8(3), pp 233-250

25. Ambali Taiwo, Sulaiman Taiwo, R.K.Z. Sahbudin, M.H. Yaacob, M. Mokhtar, 2014, Fiber vibration sensor multiplexing

techniques for quasi-distributed sensing, Optics & Laser Technology, 64(2014), pp 34-40, I.F. 1.365

26. P. T. Arasu, A. S. M. Noor, A. A. Shabaneh, S. H. Girei, M. A. Mahdi, H. N. Lim, H. A. Abdul Rashid, M. H. Yaacob, 2014,

Absorbance properties of gold coated fiber Bragg grating sensor towards aqueous ethanol, Journal of the European Optical

Society-Rapid Publications, 9(2014), pp 1-5, I.F. 0.930

27. H. F. Zmezm, S.J. Hashim, Aduwati Sali, 2014, Fast and Secure Handover Authentication Scheme in Mobile WiMAX,

Journal of Theoretical and Applied Information Technology, 59(2), pp 520-526

28. Husam Kareem, S.J. Hashim, Shamala Suberamaniam, Aduwati Sali, 2014, Energy Efficient Two Stage Chain Routing

Protocol (TSCP) For Wireless Sensor Networks, Journal of Theoretical and Applied Information Technology, 59(2), pp 442-

450

29. S. Hashim, S.A.Ibrahim, S.S.CheOmar, Y.S.M.Alajerami, M.I.Saripan, N.M.Noor, N.M. Ung, G.A.Mahdiraji, D.A.Bradley,

K.Alzimami, 2014, Photon irradiation response of photonic crystal fibre sand flat fibres at radiation therapy doses, Applied

Radiation and Isotopes, 90(2014), pp 258-260, I.F. 1.179

30. Abbas Mehdizadeh and Fazirulhisyam Hashim, 2014, Secure Group Communication Scheme in Wireless IPv6 Networks,

ECTI Transactions on Computer and Information Technology, 8(1), pp 7-16

31. Asem Khmag, Abd Rahman Ramli, Syed Abdul Rahman Al-Haddad, Shaiful Jahari Hashim, 2014, A Detailed Study on

Image Denoising Algorithms by Using the Discrete Wavelet Transformation, International Journal of Computer Science &

Technology (IJCST), 5 (2014), pp 17-24

32. Abbas Mehdizadeh and Fazirulhisyam Hashim, 2014, Secure Group Communication Scheme in Wireless IPv6 Networks,

ECTI Transactions on Computer and Information Technology, 8(1), pp 7-16

33. Asem Khmag, Abd Rahman Ramli, Syed Abdul Rahman Al-Haddad, Shaiful Jahari Hashim, 2014, A Detailed Study on

Image Denoising Algorithms by Using the Discrete Wavelet Transformation, International Journal of Computer Science &

Technology (IJCST), 5(2014), pp 17-24

34. Ambali Taiwo, Sulaiman Taiwo, R.K.Z. Sahbudin, M. H. Yaacob, M. Mokhtar, 2014, Fiber Vibration Sensor Multiplexing

Techniques for Quasi-Distributed Sensing, Optics & Laser Technology, 64(2014), pp 34-40, I.F. 1.649

35. N.A. Cholan, M. H. Al-Mansoori, A.S.M. Noor, A. Ismail, M.A. Mahdi, 2014, Formation, Properties and Role of Residual

Waves as Seeds in Multiwavelength Brillouin-Erbium Fiber Laser, Optics Communications, 329(2014), pp 163-167, I.F.

1.542

36. Mohammad Ahmed Alomari, Khairulmizam Samsudin and Abdul Rahman Ramli, 2014, Implementation of a Parallel XTS

Encryption Mode of Operation, Indian Journal of Science and Technology, 7(11), pp 1813-1819

37. Ambali Taiwo, S. Seyedzadeh, Sulaiman Taiwo, R.K.Z. Sahbudin, M. H. Yaacob, M. Mokhtar, 2014, Performance and

Comparison of Fiber Vibration Sensing Using SAC-OCDMA with Direct Decoding Techniques, Optik, 125(2014), pp 4803-

4806

38. Faranak Khosravi, G.A. Mahdiraji, M. Mokhtar, A.F. Abas, M.A. Mahdi, 2014, Improving the Performance of Three Level

Code Division Multiplexing using the Optimization of Signal Level Spacing, Optik, 125(2014), pp 5037-5040

39. Saleh Seyedzadeh, Ghafour Amouzad Mahdiraji, Ratna Kalos Zakiah Sahbudin, Ahmad Fauzi Abas, Siti Barirah Ahmad

Anas, 2014, Experimental Demonstration of Variable Weight SAC-OCDMA system, Optical Fiber Technology, 20(2014), pp

495-500

40. Salasiah Hitam, Goh Chong Loong, Ratna Kalos Zakiah Sahbudin, Makhfudzah Mokhtar, Siti Barirah Ahmad Anas, Mohd

Adzir Mahdi, 2014, Performance Analysis in Multi-Channels Ellipsoid Structure Wireless Optical Communications, Optik,

125(2014), pp 7182-7185

41. Nor Zakiah Yahaya, Zulkifly Abbas, Borhanuddin Mohd Ali, Alif Ismail, and Farizah Ansarudin, 2014, Intercomparison of

Methods for Determination of Resonant Frequency Shift of a Microstrip Patch Antenna Loaded with Hevea Rubber Latex,

Journal of Sensors (Hindawi Publishing Corporation), 2014(2014), pp 1-9

18


JABATAN KEJURUTERAAN MEKANIKAL DAN PEMBUATAN

1. S.M. Sapuan and M.R. Mansor, 2014, Concurrent engineering approach in the development of composite products,

Materials & Design, 58(10), pp 161-167, I.F. 2.913

2. H. Abral, D. Kadriadi, A. Rodianus, P. Mastariyanto, Ilhamdi, S. Arief, S.M. Sapuan and M.R. Ishak, 2014, Mechanical

properties of water hyacinth fibers – polyester composites before and after immersion in water, Materials & Design, 58(10),

pp 125-129, I.F. 2.913

3. Y.A. El-shekeil, S.M. Sapuan, M. Jawaid, and O.M. Al-Shuja’a, 2014, Influence of fiber content on mechanical,

morphological and thermal properties of kenaf fibers reinforced poly(vinyl chloride)/thermoplastic polyurethane poly-blend

composites, Materials & Design, 58(10), pp 130-135, I.F. 2.913

4. M.R. Manshor, H. Anuar, M.N. Nur Aimi, M.I. Ahmad Fitrie, W.B. Wan Nazri, S.M. Sapuan, Y.A. El-shekeil, and M.U. Wahit,

2014, Mechanical, thermal and morphological properties of durian skin fibre reinforced PLA biocomposites, Materials &

Design, 59(10), pp 279-286, I.F. 2.913

5. M.D. Azaman, S.M. Sapuan, S. Sulaiman, E.S. Zainudin, and A. Khalina, 2014, Numerical simulation analysis of the in-

cavity residual stress distribution of lignocellulosic (wood) polymer composites used in shallow thin-walled parts formed by

the injection moulding process, Materials & Design, 55(10), pp 381-386, I.F. 2.913

6. M.R. Mansor, S.M. Sapuan, E.S. Zainudin, A.A. Nuraini and A. Hambali, 2014, Conceptual design of kenaf fiber polymer

composite automotive parking brake lever using integrated TRIZ–morphological chart–analytic hierarchy process method,

Materials & Design, 54(10), pp 473-482, I.F. 2.913

7. N. Nur Aimi, H. Anuar, M.R. Manshor, W.B. Wan Nazri, and S.M. Sapuan, 2014, Optimizing the parameters in durian skin

fiber reinforced polypropylene composites by response surface methodology, Industrial Crops and Products, 54(6), pp 291-

295, I.F. 2.468

8. A.A. Alfaryjat, H.A. Mohammed, Nor Mariah Adam, M.K.A. Ariffin, M.I. Najafabadi, 2014, Influence of geometrical

parameters of hexagonal, circular, and rhombus microchannel heat sinks on the thermohydraulic characteristics,

International Communications in Heat and Mass Transfer, 52(2014), pp 121-131, I.F. 2.208

9. M Sayuti, S Sulaiman, B Baharudin, MKA Ariffin, 2014, The Influence of Mechanical Mold Vibration on Temperature

Distribution and Physical Properties of Al-11.8% Si Matrix Composites, Materials Science Forum, 773-774(2014), pp 195-

202

10. Pourzolfaghar Z, Ibrahim I, Abdullah R and NM Adam, 2014, A Technique to Capture Multi-Disciplinary Tacit Knowledge

During the Conceptual Design Phase of A Building Project, Journal of Information and Knowledge Management, 13(2), pp 1-

16

11. Tezara C, Adam NM, Juliana J, Mariani M, Siregar JP, 2014, Monitoring of the Indoor Air Quality Parameters in The Day

Care Centers in Tropical Country, Journal of Mechanical Engineering, 3(1), pp 47-52, I.F. 0.883

12. Qi Jie Kwong, Nor Mariah Adam, Sind Hoi Goh, Vijay R Raghavan, 2014, A study on energy efficiency improvement

opportunities for plug loads in buildings in the equatorial region, Journal Energy Procedia, 56(2014), pp 621-633

13. Ali M Wahhad, Nor Mariah Adam , SM Sapuan and Ahmad Alarabi, 2014, A Thermal Study of Modern Office Building in

Desert Climate in Southern Libya, Journal of Food, Agriculture and Environment,

14. Khai Mun Ng, Nor Mariah Adam, Othman Inayatullah and Mohd Zainal Abidin Ab Kadir, 2014, Assessment of solar

radiation on diversely oriented surfaces and optimum tilts for solar absorbers in Malaysian tropical latitude, International

Journal of Energy and Environmental Engineering, 5(75), pp 55-67

15. Qi Jie Kwong, Nor Mariah Adam, BB Sahari, 2014, Thermal Comfort Assessment and Potential for Energy fficiency

Enhancement in Modern Tropical Buildings, Journal Energy and Buildings, 68(2014), pp 547-557, I.F. 3.254

16. Mohammad, M., Abdullah, S., Jamaludin, N., Innayatullah, O., 2014, Predicting the fatigue life of the SAE 1045 steel using

an empirical Weibull-based model associated to acoustic emission parameters, Materials & Design, 54(2014), pp 039-1048,

I.F. 2.913

17. Z.N Ismarrubie, K. W. Loh, H. Yussof, 2014, Effect of Heat Treatment on Mechanical Properties and Susceptibility to Stress

Corrosion Cracking of Alumimium Alloy, Advanced Materials Research, 845(2014), pp 178-182

18. Hanafiah Yussof, Ahmad Khushairy Makhtar, Nur Ismarrubie Zahari, Masahiro Ohka, Siti Nora Basir, 2014, Tactile

Slippage Analysis in Optical Three-Axis Tactile Sensor for Robotic Hand, Applied Mechanics and Materials, 465-466 (2014),

pp 1375-1379

19. Hammajam Alhaji Abba, Ismarrubie Zahari Nur, Sapuan Mohd Salit, 2014, Effect of Fiber Loading on Mechanical

Properties of Millet Husk Filled High Density Polyethlene Composites, Applied Mechanics and Materials, 564(2014), pp 350-

354

20. Mahdi Nahavandi, M.A. Azmah Hanim, Z.N. Ismarrubie, 2014, Microstructural Evaluation of Bi-Ag and Bi-Sb Lead-Free

High Temperature Solder Candidates on Copper Substrate with Multiple Reflow Number, Applied Mechanics and Materials,

564(2014), pp 388-393

21. M.I.S. Ismail, Z. Taha, 2014, Surface Hardening of Tool Steel by Plasma Arc with Multiple Passes, International Journal of

Technology, 5(1), pp 79-87

22. Z. Mohid, N.M. Warap, S. Hassan, M.I.S. Ismail, R. Ibrahim, E.A. Rahim, 2014, Numerical Analysis of Laser Heating for

Laser Assisted Micro Milling Application, Applied Mechanics and Materials, 465-466(2014), pp 720-724

19


23. Z. Mohid, N.M. Warap, M.I.S. Ismail, R. Ibrahim, E.A. Rahim, 2014, Determination of Heat Flux Intensity Distribution and

Laser Absorption Rate of AISI D2 Tool Steel, Applied Mechanics and Materials, 465-466(2014), pp 730-734

24. H.T.Yamchello, R. Samin, A. Tamjidyamcholo and A. Rashidi, 2014, Prioritizing Lean Manufacturing Practices in Small and

Medium Enterprises by Applying TOPSIS in Fuzzy Environment, Advanced Materials Research, 903(2014), pp 438-443

25. Faris M. Al-Oqla, S.M. Sapuan, 2014, Natural Fiber Reinforced Polymer Composites in Industrial Applications: Feasebility of

date Palm Fibers for Sustainable Automotive Industry, Journal of Cleaner Production, 66(2014), pp 347-354,I.F. 3.398

26. A.R. Mohamed, S. M. Sapuan & A. Khalina, 2014, Machanical and Thermal Properties of Josapine Pineapple Leaf Fiber

Leaf Fiber (PALF) and PALF-reinforced Vinyl Ester Composites, Fibers and Polymers, 15(5), pp 1035-1041, I.F. 0.912

27. Qi Jie Kwong, Mohamad Afri Arsad & Nor Mariah Adam, 2014, Evaluation of Indoor Thermal Environment in a Radiant-

Cooled-Floor Office Building in Malaysia, Applied Mechanics and Materials, 564(2014), pp 228-233

28. Yusoff WF, Sapian AR, Salleh E, NM Adam and Hamzah Z, 2014, Mass flow rate of Induced by Combined Roof Solar

Collector and Vertical Stack in Hot Humid Climate, Journal Green Building, 9(1), pp 166-177

29. Tuqa Abduleazzaq, Hussein Togun, MKA Ariffin, SN Kazi, A Badarudin, NM Adam, S Masuri, 2014, Heat Transfer and

Turbulent Fluid Flow over Vertical Double Forward-Facing Step, International Journal of mechanical, Industrial Science and


30. C. H. Lee, Mohd Sapuan Salit, 2014, A Review of the Flammability Factors of Kenaf and Allied Reinforced Polymer

Composites, Advances in Materials Science and Engineering, 2014(2014), pp 1-8

31. M.K.A. Ariffin, R. Kamaluddin, SH Tang, S.B. Mohammed, 2014, Analysis of Automated G-Clip Machine Processes and

Substation Process with Simulation by Using CAD Software, Material Science Forum, 773(2014), pp 28-36

32. M Yusuf, M.K.A. Ariffin, N Ismail, S Sulaiman, 2014, Surface Quality and Chip Formation in Turning of LM6 Aluminium Alloy

and Particulate Reinforced Metal Matrix Composite, Materials Science Forum, 773(2014), pp 894-901

33. A Abdullah, S Sulaiman, B Baharudin, MKA Ariffin, N Haliza, 2014, Mechanical Properties of Tin Tailing Sand-Clay Mixture

from Batu Gajah, Perak, Malaysia for Making Greensand Casting Mould, Materials Science Forum, 773(2014), pp 211-217

34. A. Aziz Hairuddin, Talal Yusaf, Andrew P. Wandel, 2014, A review of hydrogen and natural gas addition in diesel HCCI

engines, Renewable and Sustainable Energy Reviews, 32(9), pp 739-761, I.F. 5.627

35. Yusoff WF, Sapian AR, Salleh E, NM Adam and Hamzah Z, 2014, Mass flow rate of Induced by Combined Roof Solar

Collector and Vertical Stack in Hot Humid Climate, Journal Green Building, 9(1), pp 166-177

36. Tuqa Abduleazzaq, Hussein Togun, MKA Ariffin, SN Kazi, A Badarudin, NM Adam, S Masuri, 2014, Heat Transfer and

Turbulent Fluid Flow over Vertical Double Forward-Facing Step, International Journal of mechanical, Industrial Science and


37. C. H. Lee, Mohd Sapuan Salit, 2014, A Review of the Flammability Factors of Kenaf and Allied Reinforced Polymer

Composites, Advances in Materials Science and Engineering, 2014(2014), pp 1-8

38. M.D. Azaman, S.M. Sapuan, S. Sulaiman, E.S. Zainudin, and A. Khalina, 2014, Numerical Simulation on Moulded thin-

walled Parts via Injection Moulding Process, Applied Mechanics and Materials, 575(2014), pp 73-77

39. Subramaniasarma Sreenivasan, Sameer Adnan Ibraheem, Shamsuddin Sulaiman, B. T. Hang Tuah Baharudin, Mohd K.

A. Ariffin & K. Abdan, 2014, Evaluation of Combined Treatments of Natural Fibers: Kenaf, Abaca & Oil Palm Using

Micromechanical & SEM Methods, Applied Mechanics and Materials, 912-914(2014), pp 1932-1939

40. J. Nemati, S. Sulaiman, G.H.Majzoobi, B.T.H.T. Baharudin, M.A.Azmah Hanim, 2014, Finite Element Study of Deformation

Behaviour of Al- 6063 Alloy Developed by Equal Channel Angular Extrusion, Advanced Materials Research, 1043(2014), pp

119-123

41. A.H.Lilehkoohi, A.A. Faieza, B.B. Sahari, Nuraini A.A., and M. Halali, 2014, Investigation on Adult Occupant Protection in

Car Pole Side Impact using Various Material and Thickness of Side Doors and B Pillar, Applied Mechanics and Materials,

663(2014), pp 579-584

42. Mohd Roshdi Hassan, Yong Thian Haw, 2014, Shape Memory Alloy Applications in Bone Fixation: State of the Art, Applied


43. Omit Motlagh, Tang Sai Hong, Sayed Mahdi Homayouni, George Grozev, Elpiniki I. Papageorgiou, 2014, Development of

Application-Specific Adjacency Models Using Fuzzy Cognitive Map, Journal of Computational and Applied Mathematics,

270(2014), pp 178-187

20


JABATAN KEJURUTERAAN PROSES DAN MAKANAN

1. M.Y. Ong, Y.A. Yusof, M.G. Aziz, N.L. Chin, N.A. Mohd. Amin, 2014, Characterisation of fast dispersible fruit tablets made

from green and ripe mango fruit powders, Journal of Food Engineering, 125(2014), pp 17-23, I.F. 2.276

2. M.S.H. Sarker, M. Nordin Ibrahim, N. Ab. Aziz, P. Mohd. Salleh, 2014, Energy and rice quality aspects during drying of

freshly harvested paddy with industrial inclined bed dryer , Energy Conversion and Management, 77(2014), pp 389-395, I.F.

2.775

3. Omar, F. N., Mohammed, M. A. P., Samsu Baharuddin, A., 2014, Microstructure modelling of silica bodies from oil palm

empty fruit bunch (OPEFB) fibres, Bioresources, 9(1), pp 938-951, I.F. 1.309

4. M.Z.M. Nor, R.A. Talib, M.A. Noranizan, N.L. Chin, K. Hashim, 2014, Increasing Resistant Starch Content in Fish Crackers

Through Repetitive Cooking-Chilling Cycles, International Journal of Food Properties, 17(5), pp 966-977, I.F. 0.877

5. F.S. Mohd Salleh, Y.A. Yusof, M.S. Anuar and N.L. Chin, 2014, Flow properties of ficus deltoidea extract powder and the

binders, acdisol and avicel, Journal of Food Process Engineering, 37(2014), pp 63-74, I.F 0.558

6. N. H. Mohd Rozalli, N. L. Chin, Y. A. Yusof, 2014, Simultaneous multiple responses modelling, optimisation and correlation

of Asian type peanuts (Arachis hypogaea L.) roasting using response surface methodology, Acta Alimentaria, 43(1), pp 142-

157, I.F. 0.475

7. Rosnah, S. and Chan, S. C., 2014, Enzymatic rettings of green pepper berries for white pepper production, International

Food Research Journal, 21(1), pp 237-245

8. Mohd. Afandi P. Mohammed, 2014, Visco-Hyperelastic Model for Soft Rubber-like Materials, Sains Malaysiana, 43(3), pp

451-457, I.F. 0.408

9. A. Shamjuddin, M. S. Anuar, S. M. Tahir, 2014, Characteristics of Tableted Roselle (Hibiscus sabdariffa Linn.) with Addition

of Sodium Starch Glycolate, Particulate Science and Technology, 32(2014), pp 384-391, I.F. 0.435

10. Nurfatimah Mohd Thani, Siti Mazlina Mustapa Kamal, Farah Saleena Taip, Dayang Rabiah Awang Biak, 2014,

Assessment on Rheological and Texture Properties of Xylitol-Substituted Dadih, Journal of Food Process Engineering,

37(5), pp 451-460, I.F. 0.558

11. M.K. Siti Mazlina, L. Sze Ying, M.S. Intan Shaidatul Shima, I. Iryane, 2014, Design Development of a Unit Operation for

Chilli Paste Process, American Journal of Food Technology, 9(1), pp 15-27

12. Rabitah Zakaria, Adam P. Harvey, 2014, Kinetics of reactive extraction/in situ transesterification of rapeseed oil, Fuel

Processing Technology, 125(2014), pp 34-40, I.F. 2.816

13. Muhammad Aqif Adam, Alawi Sulaiman, Che Mohd Som Said, Ayub M. Som, Azhari Samsu Baharuddin, Mohd Noriznan

Mokhtar, 2014, Preliminary Study of Oil Palm Decanter Cake Natural Polymer Composite (OPDC-NPC), Advanced Materials

Research, 911(2014), pp 40-44

14. Haj Najafi, A., Yusof, Y.A., Rahman, R.A., Ganjloo, A., Ling, C.N., 2014, Effect of osmotic dehydration process using

sucrose solution at mild temperature on mass transfer and quality attributes of red pitaya (Hylocereus polyrhizusis),

International Food Research Journal, 21(2), pp 625-630

15. Wan Razali, W. A., Samsu Baharuddin, A., Zaini, L. A., Mokhtar, M. N., Taip, F. S., and Zakaria, R., 2014, Effect of seed

sludge quality using oil palm empty fruit bunch (OPEFB) bio-char for composting, Bioresources, 9(2), pp 2739-2756, I.F.

1.309

16. N.A. Ghani, Y.A. Yusof, R.A. Talib, N.L. Chin and M.G. Aziz, 2014, Changes of Physical Properties during Microwave

Processing of Sagon, Journal of Food Processing and Preservation, 38(2014), pp 758-767, I.F. 0.45

17. Bo Yuan Lim, Rosnah Shamsudin, Robiah Yunus, 2014, Development and testing of a Jatropha fruit shelling process for

shell-free kernel recovery in biodiesel production, Biosystems Engineering, 121(2014), pp 46-55, I.F. 1.357

18. Rosnah Shamsudin, Noranizan Mohd Adzahan,Yap Pui Yee , Atikah Mansor, 2014, Effect of repetitive ultraviolet irradiation

on the physico-chemical properties and microbial stability of pineapple juice, Innovative Food Science and Emerging

Technologies, 23(2014), pp 114-120, I.F. 2.528

19. Ali, N.A., Khalid, N.I., Aziz, N.A., Shamsudin, R., Taip, F.S., 2014, Investigation of fouling deposit formation during

pasteurization of chili sauce by using lab-scale concentric tube-pasteurizer, Journal of Engineering Science and Technology,

9(3), pp 334-346

20. Fatin S.A., Rosnah S.,Yunus, R., 2014, Effect of chopping oil palm fruit spikelets on the free fatty acid content release rate

and its mechanical properties, International Journal of Research in Engineering and Technology, 3(1), pp 511-516

21. Fatin S.A., Rosnah S.,Yunus, R., 2014, Effect of chopping oil palm fruit spikelets on the free fatty acid content release rate

and its mechanical properties, International Journal of Research in Engineering and Technology, 3(1), pp 511-516

22. M. Nordin Ibrahim, M.S.H. Sarker, Ab. Aziz N., Mohd Salleh P., 2014, Drying Performance and Overall Energy Requisite of

Industrial Inclined Bed Paddy Drying in Malaysia, Journal of Engineering Science and Technology, 9(3), pp 398-409

23. Zanariah M. Dom, Ling T. Chuan, Rozita Yusoff, 2014, Production of medium-chain acylglycerols by lipase esterification in

packed bed reactor: Process optimisation by response surface methodology, Journal of Engineering Science and

Technology, 9(3), pp 384-397

24. Nurul A. Sani, Farah S. Taip, Siti M. M. Kamal, Norashikin Ab. Aziz, 2014, Effects of temperature and airflow on volume

development during baking and its influence on quality of cake, Journal of Engineering Science and Technology, 9(3), pp

303-313

21


25. Muhammad Fakhri Zainuddin, Rosnah Shamsudin, Mohd Noriznan Mokhtar, Dahlan Ismail, 2014, Physicochemical

Properties of Pineapple Plant Waste Fibers from the Leaves and Stems of Different Varieties, Bioresources, 9(3), pp 5311-

5324, I.F. 1.309

26. Christine Jamie Vincent, Rosnah Shamsudin, Azhari Samsu Baharuddin, 2014, Pre-Treatment Of Oil Palm Fruits: A

Review, Journal of Food Engineering, 143 (2014), pp 123-131, I.F. 2.276

27. Ahmad Tarmezee Talib, Mohd Noriznan Mokhtar, Azhari Samsu Baharuddin, Alawi Sulaiman, 2014, Effects of aeration

rate on degradation process of oil palm empty fruit bunch with kinetic-dynamic modeling, Bioresource Technology,

169(2014), pp 428-438, I.F. 5.039

28. Suryani Saallah, M. Nazli Naim, Mohd. Noriznan Mokhtar, Noor Fitrah Abu Bakar,Masao Gen, I. Wuled Lenggoro, 2014,

Transformation of cyclodextrin glucanotransferase (CGTase) fromaqueous suspension to fine solid particles via

electrospraying, Enzyme and Microbial Technology, 64-65(2014), pp 52-59, I.F. 2.966

29. Farah Nadia Omar, Mohd Afandi P. Mohammed, Azhari Samsu Baharuddin, 2014, Effect of Silica Bodies on the

Mechanical Behaviour of Oil Palm Empty Fruit Bunch Fibres, Bioresources, 9(4), pp 7041-7058, I.F. 1.549

30. Naimah Sahad, Ayub Md. Som, Azhari Samsu Baharuddin, Noriznan Mokhtar, Zainuri Busu, Alawi Sulaiman, 2014,

Physicochemical Characterization of Oil Palm Decanter Cake (OPDC) for Residual Oil Recovery, Bioresources, 9(4), pp

6361-6372, I.F. 1.549

31. Siti Noraida Abd-Rahim, Alawi Sulaiman, Nurul Aini Edama, Azhari Samsu Baharuddin, Mohd Noriznan Mokhtar, 2014,

Factorial Design Analysis of a Tapioca Slurry Saccharification Process Using Encapsulated Enzymes, Bioresources, 9(2), pp

3361-3368, I.F. 1.549

32. Nurul Aini Edama, Alawi Sulaiman, Ku Halim Ku Hamid, Siti Noraida Abd Rahim, Azhari Samsu Baharuddin, Mohd

Noriznan Mokhtar, 2014, Encapsulation of Multi-Enzymes on Waste Clay Material: Preparation, Characterization and

Application for Tapioca Starch Hydrolysis, Applied Mechanics and Materials, 548-549(2014), pp 77-82

33. Siti Hajar Othman, Nurul Raudhah Abd Salam, Norhazlizam Zainal, Roseliza Kadir Basha, Rosnita A. Talib, 2014,

Antimicrobial Activity of TiO2 Nanoparticle-Coated Film for Potential Food Packaging Applications, International Journal of

Photoenergy, 2014(2014), pp 1-6

34. Jumardi Roslan, Siti Mazlina Mustapa Kamal, Khairul Faezah Md. Yunos, Norhafizah Abdullah, 2014, Optimization of

Enzymatic Hydrolysis of Tilapia Muscle (Oreochromis niloticus) using Response Surface Methodology (RSM), Sains

Malaysiana, 43(11), pp 1715-1723, I.F. 0.48

35. Azmi, N.S., Md. Yunos, K.F., 2014, Effect of regenerated cellulose of ultrafiltration membranes on POME treatment, Jurnal

Teknologi (Sciences and Engineering), 70(2), pp 81-86

36. D. Novin, K.F. Md. Yunos, 2014, Effect of Pameters on Performance of Ultrafiltration (UF) to Fractionate Catfish Protein

Hydrolysate, Jurnal Teknologi (Sciences and Engineering), 70(2), pp 11-14

37. Siok Peng Kek, Nyuk Ling Chin, Yus Aniza Yusof, 2014, Simultaneous time-temperature-thickness superposition

theoretical and statistical modelling of convective drying of guava, Journal of Food Science and Technology, 51(12), pp

3609-3622, I.F. 2.024

38. K. Kusdianto, M. Nazli Naim, Keitaro Sasaki, I. Wuled Lenggoro, 20104, Immobilization of colloidal particles into sub-100

nm porous structures by electrophoretic methods in aqueous media, Colloids and Surfaces A: Physicochemical and

Engineering Aspects, 459(2014), pp 142-150, I.F. 2.354

39. Syahidah Kamaruddin, Rosnah Shamsudin, Noranizan Mohd Adzahan, Zaulia Othman & Anvarjon Ahmedov, 2014,

Modified Atmosphere Storage of Minimally Processed Cantaloupe (Cucumis melo L. var. Reticulatus cv. Glamour), Journal

of Agricultural Science, 6(10), pp 218-225

40. Yavari, J.B. Endan, Y, 2014, Study of the Lump System Analysis to Finding Constant Coefficients C and M, of the Equation

θ(t) = ce -mt to Predicting Malaysia Cockle Center Temperature at Different Heating Condition, International Journal of

Emerging Technology and Advanced Engineering, 4(7), pp 53-64

41. Siti Hajar Othman, Suraya Abdul Rashid, Tinia Idaty Mohd. Ghazi, Norhafizah Abdullah, 2014, 3D CFD Simulations: Effect

of Operation Parameters on the Deposition of Photocatalytic TiO2 Nanoparticles by MOCVD, Chemical Vapor Deposition,

20(2014), pp 1-12

22


SENARAI PROSIDING MENGIKUT JABATAN

JABATAN KEJURUTERAAN AEROANGKASA

1. Chen Ciang Chia, Omar Kassim Ariff, Hyomi Jeong, Chandima Gomes, Siow Chun Lim, Jung-Ryul Lee & Erfan Salami,

Evaluation of Lightning Damages in Composite Wing in proceedings of the Advances in Structural Health Management

and Composite Structures 2014 (ASHMCS 2014), Jeonju, Republic of Korea

JABATAN KEJURUTERAAN AWAM

1. Fateh, F. Hejazi, A. B. Omer , M. S. Jaafar,Seismic Performance of Reinforced Concrete Shear wall with Embedded

Viscous Damper,Conference Paper,First AUN/SEED-Net Regional Conference on Natural Disaster (RCND),Yogyakarta,

Indonesia,22-23 Jan 2014

2. F. Hejazi, M. Shahpasand, M. Mirnezhad, M. S. Jaafar, A. A. Abang Ali,A Web-Based Architecture for Interactive Finite

Element Program,Conference Paper,15th International Conference on Computing in Civil and Building

Engineering,Orlando, Florida, United State, 23-25 June 2014

3. Fateh , F. Hejazi, M. R. Khojasteh,Seismic performance Evaluation of Steel Shear Wall by Equivalent Truss Approach

Modeling,Conference Paper,15th International Conference on Computing in Civil and Building Engineering,Orlando,

Florida, United State, 23-25 June 2014

4. Moslih Amer Salih, Noor Azline Mohd Nasir, Abang Abdullah Abang Ali,High Strength Geopolymer Mortar from High

Volume of Palm Oil Fuel Ash blended with GGBS,Conference Paper,World Research & Innovation Convention on

Engineering & Technology 2014, Putrajaya, MalaysiaPutrajaya, 25-26 November 2014

5. Amir Fateh, Farzad Hejazi, Mohd Saleh Jaafar, Azlan Bin Adnan,Vibration of Variable Stiffness Bracing System

Subjected to Harmonic Load,Conference Paper,The 7th AUN/SEED-Net Regional Conference in Mechanical and

Manufacturing Engineering 2014 and University-Industry Forum,Hanoi, Vietnam,9-10 Oct 2014

6. A.A. Farah, S. A. Saad, A. K. Izian, S. Nor Azizi,Effect of Tropical Climate to Compressive Strength of High Performance

Fibre Reinforced Concrete ,Conference Paper,5th Brunei International Conference on Engineering & Technology (BICET

2014) ,Brunei Darussalam,1-3 November 2014

7. A.A. Farah N.A, M.J.M. Usamah1, Z.A. Siti Ashela, M.N. Noor Azline, A.A.A.Ali,Comparison of Unrestrained Shrinkage

Properties between Polypropylene Fiber Concrete and Coconut Fibres Concrete,Conference Paper,International

symposium on Applied Engineering & Sciences (SAES 2014),Japan ,20-21 Disember 2014

8. Biswajeet Pradhan, Synergistic Application of Geoinformation Techniques and Statistical and Data Mining Models in

Landslide Mapping, Keynote Paper, Proceedings of First Landslide Conference entitled “Awareness on Landslide Risks,

its causes, mitigation and prevention”, Bandar Seri Bagwan, Brunei Darussalam, 15 Januari 2014.

9. Biswajeet Pradhan, Regional Mineral Potential Mapping in Malaysia Using Bivariate and Multivariate Probabilistic Based

Models and GIS, Keynote Paper, Annual Jabatan Mineral dan Geosains Conference - 2014, Langkawi, 18 Jun 2014.

10. Abubakr A. A. Al-sharif, Biswajeet Pradhan, Helmi Zulhaidi Mohd Shafri, Shattri Mansor Quantitative Analysis of Urban

Sprawl in Tripoli using Pearson’s Chi-Square Statistics and Urban Expansion Intensity Index, Proceedings of IGRSM

2014 Conference, Kuala Lumpur, Malaysia, 21-22 April 2014

11. Omar F. Althuwaynee, Biswajeet Pradhan, Noordin Ahmad, Landslide Susceptibility Mapping Using Decision-Tree

Based Chi-Squared Automatic Interaction Detection (CHAID) and Logistic Regression (LR) Integration, Proceedings of

IGRSM 2014 Conference, Kuala Lumpur, Malaysia, 21-22 April 2014

12. Mohsen Dadras, Helmi Zulhaidi Mohd Shafri, Noordin Ahmad, Biswajeet Pradhan, Sahabeh Safarpour, Spatial-

Temporal of Urban Sprawl Pattern and Fragmentation in Bandar Abbas City, Iran, Proceedings of IGRSM 2014

Conference, Kuala Lumpur, Malaysia, 21-22 April 2014

13. Tathiri, Anahita, Shafri, Helmi Zulhaidi Mohd, Hamedianfar, Alireza, Development of Transferable Rule-Sets For Urban

Areas Using QuickBird Satellite Imagery, IEEE International Conference on Aerospace Electronics and Remote Sensing

Technology (ICARES), Yogyakarta, Indonesia, 13-14 Nov 2014

14. Norbazlan M. Yusof, Biswajeet Pradhan, Landslide Susceptibility Mapping Along PLUS Expressways in Malaysia Using

Probabilistic Based Model in GIS, 7th IGRSM International Remote Sensing & GIS Conference and Exhibition, Kuala

Lumpur, 21-22 April 2014

JABATAN KEJURUTERAAN BIOLOGI DAN PERTANIAN

1. Hashim N., & Wan Ahmad W. M. A., Effect of Corn Stem as a Soil Conditioner on a Sandy Loam Soil in Proceedings of

the National Conference on Agricultural & Food Mechanization 2014 (NCAFM 2014), Kota Kinabalu Sabah.

2. Maina Mamodu Mohd, Mohd Soom Mohd Amin, Md Rowshon Kamal, Aimrun Wayayok, Samsuzana Abd Aziz & Mohd

Yazid, Application of Web Geospatial Decision Support System for Tanjung Karang Rice Precison Irrigation Water

Management in proceedings of the International Conference on Agriculture, Food and Environmental Engineering

(ICAFEE'2014), Kuala Lumpur, Malaysia.

23


3. Ebrahim Jahansiri & Abdul Rashid Mohd Shariff, Developing Web-Based Data Analysis Tools for Precision Farming

using R and Shiny in proceedings of the 7th IGRSM International Conference and Exhibition on Remote Sensing & GIS,

Kuala Lumpur, Malaysia

4. Faranak Ghobadifar, Aimrun Wayayok, Shattri Mansor & Helmi Shafri, Using Spot-5 Images in Rice Farming for

Detecting BPH (Brown Plant Hopper) in proceedings of the 7th IGRSM International Conference and Exhibition on

Remote Sensing & GIS, Kuala Lumpur, Malaysia.

5. Nur Aini, W. Aimrun, M.S.M Amin, M.H. Ezrin & H.Z. Shafri, Auto-Guided Oil Palm Pkaner by using Multi-GNSS in

proceedings of the 7th IGRSM International Conference and Exhibition on Remote Sensing & GIS, Kuala Lumpur,

Malaysia.

6. K Khorramnia, A R M Shariff, A Abdul Rahim & S Mansor, Toward Malaysian Sustainable Agriculture in 21st Century in

proceedings of the IOP Conference Series: Earth & Environmental Science, Kuala Lumpur, Malaysia.

7. Ruzinoor Che Mat, Abdul Rashid Mohammed Shariff, Abdul Nasir Zulkifli, Mohd Shafry Mohd Rahim &Mohd Hafiz

Mahayudin, Using Game Engine for 3D Terrain Visualisation of GIS Data: A review in proceedings of the 7th IGRSM Inter.

Remote Sensing & GIS Conference and Exhibition (IOP Conference Series: Earth & Environmental Science), Kuala

Lumpur, Malaysia

8. M S M Alfatni, A R M Shariff, M Z Abdullah, M H Marhaban, S B Shafie, M D Bamiruddin, O M B Saaed, Oil Palm Fresh

Fruit Bunch Ripeness Classification based on Rule-based Expert System of ROI Image Processing Technique Results in

proceedings of the 7th IGRSM Inter. Remote Sensing & GIS Conference and Exhibition (IOP Conference Series: Earth &

Environmental Science), Kuala Lumpur, Malaysia

9. O.M. Bensaeed, A.M. Shariff, A. B. Mahmud, H. Shafri, M. Alfatni, Oil Palm Fruit Grading using a Hyperspectral Device

and Machine Learning Algorithm in proceedings of the 7th IGRSM Inter. Remote Sensing & GIS Conference and

Exhibition (IOP Conference Series: Earth & Environmental Science), Kuala Lumpur, Malaysia

10. Haniffah WH, Khalina A, Sapuan SM & Bakae ES, Drying of Heat Treated Fibre Stored in High Moisture Environment in

proceedings of the The Postgaduate Symposium on Composites Science & Technology 2014 & 4th Postgraduate

Seminar on Natural Fibre Composites 2014, IOI Palm Garden Hotel, Putrajaya, Malaysia

11. Ramin Shamsiri, Wan Ishak Wan Ismail, Desa Ahmad, Determining Tomato's Growth Response to Air Temperature,

Relative Humadity and Vapor Pressure Deficit in Tropical Lowland Conditions in proceedings of the 2014 ASABE &

CSBE/SCGAB Annual International Meeting, Montreal, Quebec, Canada

12. Ramin Shamsiri, Wan Ishak Wan Ismail, Desa Ahmad, Adaptive Analysis Framework for Controlled Environments Plant

Production, Case Study in Tropical Lowland Malaysia in proceedings of the 2014 ASABE & CSBE/SCGAB Annual

International Meeting, Montreal, Quebec, Canada

13. Amer N. N. Kakahy, D. Ahmad, M.D. Akhir, S. Sulaiman, A. Ishak, Effects of Rotary Mower Blade Cutting Angles on the

Pulverization of Sweet Potato Vine in proceedings of the Agriculture and Agricultural Science Procedia (2nd International

Conference on Agricultural and Food Engineering, CAFAEi2014), Berjaya Time Square Hotel, Kuala Lumpur, Malaysia

14. Dauda SM., Desa A., Khalina A. & Jamarei O., Physical and Mechanical Properties of Kenaf Stems at Varying Moisture

Contents in proceedings of the Agriculture and Agricultural Science Procedia (2nd International Conference on

Agricultural and Food Engineering, CAFAEi2014), Berjaya Time Square Hotel, Kuala Lumpur, Malaysia

15. A. Muazu, A. Yahya, W.I.W. Ishak, S. Khairunniza-Bejo, Machinery Utilization and Production Cost of Wetland, Direct

Seeding Paddy Cultivation in Malaysia in proceedings of the Agriculture and Agricultural Science Procedia (2nd

International Conference on Agricultural and Food Engineering, CAFAEi2014), Berjaya Time Square Hotel, Kuala

Lumpur, Malaysia

16. A. Muazu, A. Yahya, W.I.W. Ishak, S. Khairunniza-Bejo, Yield Prediction Modeling using Data Envelopment Analysis

Methodology for Direct Seeding, Wetland Paddy Cultivation in proceedings of the Agriculture and Agricultural Science

Procedia (2nd International Conference on Agricultural and Food Engineering, CAFAEi2014), Berjaya Time Square Hotel,

Kuala Lumpur, Malaysia

17. Rabar Fatah Salih, Khalina Abdan, Aimrun Wayayok, Anuar Abdul Rahim, Norhashila Hashim, Response of Nitrogen

Content for some Varieties of Kenaf Fiber (Hibiscus Cannabinus L.) by apllying Different Levels of Potassium, Boron &

Zinc in proceedings of the Agriculture and Agricultural Science Procedia (2nd International Conference on Agricultural and

Food Engineering, CAFAEi2014), Berjaya Time Square Hotel, Kuala Lumpur, Malaysia

18. Pardis Fazli, Hasfalina Che Man, Comparison of Methane Emission from Conventional and Modified Paddy Cultivation

Malaysia in proceedings of the Agriculture and Agricultural Science Procedia (2nd International Conference on

Agricultural and Food Engineering, CAFAEi2014), Berjaya Time Square Hotel, Kuala Lumpur, Malaysia

19. M.N.A. Uda, C.M. Hasfalina, A.A. Samsuzana, S. Faridah, I. Zamri, B. Siti Noraini, W. Nur Sabrina, U. Hashim,

Comparison of Two Different Isolation & Purification Method for Rice Tungro Bacilliform Virus (RTBV) in proceedings of

the Agriculture and Agricultural Science Procedia (2nd International Conference on Agricultural and Food Engineering,

CAFAEi2014), Berjaya Time Square Hotel, Kuala Lumpur, Malaysia

20. Siti Khairunniza-Bejo, Chin Nee Vong, Detection of Basal Stem Rot (BSR) Infected Oil Palm Tree using Laser Scanning

Data in proceedings of the Agriculture and Agricultural Science Procedia (2nd International Conference on Agricultural

and Food Engineering, CAFAEi2014), Berjaya Time Square Hotel, Kuala Lumpur, Malaysia

24


21. Norazlida Jamil, Siti Khairunniza Bejo, Husk Detection using Thermal Imaging Technology in proceedings of the

Agriculture and Agricultural Science Procedia (2nd International Conference on Agricultural and Food Engineering,

CAFAEi2014), Berjaya Time Square Hotel, Kuala Lumpur, Malaysia

22. Diyana Jamaludin, Samsuzana Abd Aziz & Desa Ahmad, Application of Impedance Spectroscopy Sensing for Leaf

Water Status in proceedings of the International Conference of Agricultural Engineering (AgEng 2014), Zurich.

23. Nur Aini, M.H. Ezrin, W. Aimrun, Relationship between Soil Apparent Electrical Conductivity and pH Value of Jawa Series

in Oil Palm Plantation in proceedings of the Agriculture and Agricultural Science Procedia (2nd International Conference

on Agricultural and Food Engineering, CAFAEi2014), Berjaya Time Square Hotel, Kuala Lumpur, Malaysia

24. E. Nurnadiah, W. Aimrun, M.S.M. Amin, A.S. Idris, Preliminary Study on Detection of Basal Stem Rot (BSR) Disease at

Oil Palm Tree using Electrical Resistance in proceedings of the Agriculture and Agricultural Science Procedia (2nd

International Conference on Agricultural and Food Engineering, CAFAEi2014), Berjaya Time Square Hotel, Kuala

Lumpur, Malaysia

25. N.S. Dlamini, M.K. Rowshon, M. Makhanya, S. Sithole, The CDAA Framework for Development of Sustainable Large-

scale Smallholder Irrigation Schemes in Swaziland in proceedings of the Agriculture and Agricultural Science Procedia

(2nd International Conference on Agricultural and Food Engineering, CAFAEi2014), Berjaya Time Square Hotel, Kuala

Lumpur, Malaysia

26. Abdallah Alsayed, Muhammad Razif Mahadi, Precise Positioning Based on Pixel Differential in Linear Optical Sensor

Array in proceedings of the Agriculture and Agricultural Science Procedia (2nd International Conference on Agricultural

and Food Engineering, CAFAEi2014), Berjaya Time Square Hotel, Kuala Lumpur, Malaysia

27. Nawi Nazmi Mat, Kamal Md Rowshon, Chen Guangnan, Jensen Troy, Prediction of Sugarcane Quality Parameters using

Visible-shortwave near Infrared Spectroradiometer in proceedings of the Agriculture and Agricultural Science Procedia

(2nd International Conference on Agricultural and Food Engineering, CAFAEi2014), Berjaya Time Square Hotel, Kuala

Lumpur, Malaysia

28. Muhamad Saufi Mohd Kassim, Wan Ishak Wan Ismail, Abdul Rahman Ramli, Siti Khairunniza Bejo, Image Clustering

Technique in oil Palm Fresh Fruit Bunch (FFB) Growth Modeling in proceedings of the Agriculture and Agricultural

Science Procedia (2nd International Conference on Agricultural and Food Engineering, CAFAEi2014), Berjaya Time

Square Hotel, Kuala Lumpur, Malaysia

JABATAN KEJURUTERAAN ELEKTRIK DAN ELEKTRONIK

1. Mohammad Seifi, Azura Che Soh, Mohd Khair Hassan, Noor Izzri Abdul Wahab, An Innovative Demand Side

Management for Vulnerable Hybrid Microgrid in proceedings of the 2014 IEEE Innovative Smart Grid Technology - Asia

(ISGT ASIA 2014), Kuala Lumpur, Malaysia.

2. Salah Eldeen Gasim M.H., J. Jasni, M.A. M. Radzi, H. Hizam, Power System Security Enhancement and Loss Reduction

using the SMART Power Flow Controller in proceedings of the 2014 IEEE Innovative Smart Grid Technology - Asia (ISGT

ASIA 2014), Kuala Lumpur, Malaysia.

3. Ahmad Syukri Mohamad, Norman Mariun, Nasri Sulaiman, Mohd Amran Mohd Radzi, A New Cascaded Multilevel

Inverter Topology with Minimum Number of Conducting Switches in proceedings of the 2014 IEEE Innovative Smart Grid

Technology - Asia (ISGT ASIA 2014), Kuala Lumpur, Malaysia.

4. Aliyu Sabo, Noor Izzri Abdul Wahab, Mohd Amran Mohd Radzi, Nor Farahaida Abdul Rahman, Nashiren Farzilah

Mailah, A Modified Digital Hysteresis and Artificial Neural Network (ANN) Algorithm in Single Phase Shunt Active Power

Filter Control in proceedings of the 2014 IEEE Innovative Smart Grid Technology - Asia (ISGT ASIA 2014), Kuala Lumpur,

Malaysia.

5. Mohd Izhwan Muhamad, Mohd Amran Mohd Radzi, Noor Izzri Abdul Wahab, Hashim Hizam, Optimal Design of Hybrid

Renewable Energy System Based on Solar and Biomass for Halal Products Research Institute, UPM in proceedings of

the 2014 IEEE Innovative Smart Grid Technology - Asia (ISGT ASIA 2014), Kuala Lumpur, Malaysia.

6. Payam Farzan, Mahdi Izadi, Chandima Gomes, On the Fault Location Algorithm for Distribution Networks in Presence of

DG in proceedings of the 2014 IEEE Innovative Smart Grid Technology - Asia (ISGT ASIA 2014), Kuala Lumpur,

Malaysia.

7. Pouya Borazjani, Noor Izzri Abdul Wahab, Hashim Hizam, Azura Che Soh, A Review on Microgrid Control Techniques

in proceedings of the 2014 IEEE Innovative Smart Grid Technology - Asia (ISGT ASIA 2014), Kuala Lumpur, Malaysia.

8. S. S. Sinan, S. N. Shawaludin, J. Jasni, N. Azis, M. Z. A. Ab Kadir, M. N. Mohtar, Investigation on the AC Breakdown

Voltage of RBDPO Olein in proceedings of the 2014 IEEE Innovative Smart Grid Technology - Asia (ISGT ASIA 2014),

Kuala Lumpur, Malaysia.

9. Fauzani. N Jamaluddin, Siti A. Ahmad, Samsul Bahari Mohd Noor, Wan Zuha Wan Hassan, Future Direction of the

Electromyography Based Method to Evaluate Muscle Fatigue in proceedings of the 2014 4th International Conference on

Engineering Technology & Technopreneurship (ICE2T), Kuala Lumpur, Malaysia

10. Ahurra Kulyaka Mary, Chandima Gomes, Ashen Gomes, Wan Fatinhamamah Wan Ahmad, Lightning Hazard Mitigation

in Uganda in proceedings of the 2014 International Conference on Lightning Protection (ICLP), Shanghai, China

25


11. S.N.M. Arshad, M.Z.A Ab Kadir, M. Izadi, M.N. Hamzah, Chandima Gomes and J. Jasni, Characterization of Measured

Lightning Electric Fields Observed in Malaysia in proceedings of the 2014 International Conference on Lightning

Protection (ICLP), Shanghai, China

12. N. Rameli, M.Z.A Ab Kadir, M. Izadi, Chandima Gomes and N. Azis, Effect of the Grounding System Arrangment on the

Lightning Current along Tall Structures in proceedinjgs of the 2014 International Conference on Lightning Protection

(ICLP), Shanghai, China

13. Siow Chun Lim, Chandima Gomes, Mohd Zainal Abidin Ab Kadir, Norhafiz Azis, Steady State Performance of

Improvised Ufer Grounding Practice in proceedings of the 2014 International Conference on Lightning Protection (ICLP),

Shanghai, China

14. Sara Razavi, Nasri Sulaiman, Roslina Mohd Sidek, Somayeh Mohammady, Analysis on the Parameters of Selected

Mapping without Side Information on PAPR Performance in proceedings of the 2014 IEEE 5th Control and System

Graduate Research Colloquium, Shah Alam, Malaysia

JABATAN KEJURUTERAAN KIMIA DAN ALAM SEKITAR

1. Luqman Chuah, Thermal degradation kinetics of flavonoid derived from Orthosiphon stamineus in proceedings of the

2014 International Conference on Food Properties (ICFP 2014), Kuala Lumpur, Malaysia.

2. Rabiatuladawiyah Danial, Chuah Teong Guan, Mohsen Nourozi Mobarekeh, Shafreeza Sobri, Yvonne Koh Wei Ling,

Improvement of Electrocoagulation Process Using Magnetic Field for Iron Electrodes In removing Glyphosate from

Aqueous Solutions in proceedings of the Vietnam Malaysia International Chemical Congress (VMICC 2014), Hanoi,

Vietnam.

3. N.Z. Rebitanim, W.W.A.K.Ghani, M.A.M.Salleh, A.B. Alias, Carbon Dioxide adsorption on coconut shell biochar in

proceedings of 13th International Conference on Clean Energy, Istanbul, Turkey.

4. Sariah Saalah, Luqman Chuah Abdullah, Min Min Aung, Mek Zah Salleh, Dayang Radiah Awang Biak, Mahiran Basri,

Emiliana Rose Jusoh, Physical, Mechanical Thermal Properties of Vegitable Oil-based waterborne polyurethane

dispersions in proceedings of 9th International Materials Technology Conference & Exhibition (IMTCE2014), Kuala

Lumpur, Malaysia

5. Emiliana Rose Jusoh@Taib, Luqman Chuah Abdullah, Min Min Aung, Mek Zah Salleh, Mahiran Basri, Sariah Saalah,

UV Radiation Curing of Expoxidized Jatropha Oil Acrylate for Surface Coatings, 9th International Materials Technology

Conference & Exhibition (IMTCE2014), Kuala Lumpur, Malaysia

JABATAN KEJURUTERAAN SISTEM KOMPUTER DAN KOMUNIKASI

1. Varahram, P, Ali. B.M, Mohammady, S, Sulaiman, N.B., A recursive optimum frequency domain matrix to reduce crest

factor in OFDM systems in proceedings of the 2014 IEEE International Conference on Consumer Electronics (ICCE), Las

Vegas, United States.

2. Kazemian. M, Varahram. P, Hashim. S.J.B, Ali. B.B.M, Mohammady. S, Sulaiman. N, Peak-to-average power ratio

reduction based on Cross-Correlation in OFDM systems in procceedings of the 16th International Conference on Advanced

Communication Technology (ICACT 2014), PyeongChang, South Korea.

3. Abbas Mehdizadeh and Fazirulhisyam Hashim, and Mohammed Othman, Lightweight Decentralized Multicast-Unicast

Key Management Method in Wireless IPv6 Networks in procceedings of the 2014 IEEE International Conference on

Communication, Hotel Hilton, Sydney, Australia

4. M. H. Kakaee, S. I. Essa, Saleh Seyedzadeh, M. Mokhtar, S. B. Anas and R. K. Sahbudin, Proposal of Multi-Service (MS)

Code to Differentiate Quality of Services for OCDMA Systems in proceedings of the 2014 IEEE 5th International

Conference on Photonics (ICP), Kuala Lumpur, Malaysia

5. N. F. Razali, M. H. Abu Bakar, N. Tamchek, M.H. Yaacob, M.A. Mahdi, Temperature Sensitivity Comparison Between Bare

FBG and Buffered FBG in proceedings of the 2014 IEEE 5th International Conference on Photonics (ICP), Kuala Lumpur,

Malaysia

JABATAN KEJURUTERAAN MEKANIKAL DAN PEMBUATAN

1. M. F. M. Alkbir, S. M. Sapuan, Nuraini A. A. and M.R. Ishak, Effect Of Hexagonal Angle on Energy Absorption Capability

and Load-Carrying Capacity of Natural Kenaf Fibre Reinforced Composite Hexagonal Tubes in proceedings of The

Postgraduate Symposium on Composite Science and Technology 2014 & 4th Postgraduate Seminar on Natural Fibre

Composites 2014, IOI Palm Garden Hotel, Putrajaya.

2. M. R. Mansor, S. M. Sapuan, E. S. Zainudin, A. A. Nuraini and A. Hambali, Topsis Method for Materials Selection of

Hybrid Bio-Composites Thermoset Matrix for Automotive Bumper Beam Application in proceedings of The Postgraduate

26


Symposium on Composite Science and Technology 2014 & 4th Postgraduate Seminar on Natural Fibre Composites 2014,

IOI Palm Garden Hotel, Putrajaya.

3. M.D. Azaman, S.M. Sapuan, S. Sulaiman, E.S. ainudin and A. Khalina, The optimization on residual stresses analysis for

moulded thin walled parts fabricated using wood-filled polypropylene composites via plastic injection moulding in

proceedings of The Postgraduate Symposium on Composite Science and Technology 2014 & 4th Postgraduate Seminar

on Natural Fibre Composites 2014, IOI Palm Garden Hotel, Putrajaya.

4. L. Yusriah, S.M. Sapuan, E.S. Zainudin and M. Mariatti, Thermal degradation behavior of alkali treated betel nut husk fibre

reinforced VE composites in proceedings of The Postgraduate Symposium on Composite Science and Technology 2014 &

4th Postgraduate Seminar on Natural Fibre Composites 2014, IOI Palm Garden Hotel, Putrajaya.

5. S.M. Sapuan, Conceptual design in products from natural fibre composites in proceedings of the 2014 International

Conference on Mechanical Design, Manufacture and Automation Engineering (MDMAE 2014), Phuket, Thailand.

6. Maryam Mousavi, Faieza Abdul Aziz and Napsiah Ismail, Investigation of 3D Modelling and Virtual Reality Systems in

Malaysian Automotive Industry in proceedings of the International Conference on Computer, Communications and

Information Technology (CCIT 2014), Beijing, China

7. Nur Suraya Sahol Hamid, Faieza Abdul Aziz, Amir Azizi, Virtual Reality Applications in Manufacturing System in

proceedings of the Science and Information Conference 2014, London, UK

JABATAN KEJURUTERAAN PROSES DAN MAKANAN

1. Tan, M.C., Chin, N.L., Yusof, Y.A., Taip, F.S., and Abdullah, J., Aerated Properties of Ultrasonic Treated Whey Protein

Foam for Cake Making in proceedings of the 2014 International Conference on Food Properties (ICFP2014), Kuala

Lumpur, Malaysia.

2. Faridatul Ain, M. R., Yusof, Y.A., Aziz, M.G., Chin, N.L., Mohd Amin, N.A., Mohd Ghazali, H., Taufiq, A. M,

Physicochemical and Dissolution Properties of Pulp and Freeze-Dried Powder of Pineapple Tablets in proceedings of the

2014 International Conference on Food Properties (ICFP2014), Kuala Lumpur, Malaysia.

3. Abu Bakr Mohd Hanim, Nyuk Ling Chin, Yus Aniza Yusof, Flowability Properties of Sweet Potato Flour in proceedings of

the 2014 International Conference on Food Properties (ICFP2014), Kuala Lumpur, Malaysia.

4. Mohd Rozalli, N. H., Chin, N. L., and Yusof, Y. A., Particle Size Distribution of Natural Peanut Butter and its Dynamic

Rheological Properties in proceedings of the 2014 International Conference on Food Properties (ICFP2014), Kuala

Lumpur, Malaysia.

5. Bo Yuan Lim, Rosnah Shamsudin, Robiah Yunus, The Effect of Jatropha Fruits Moisture Content on Shelling Process by

Compression Roller in proceedings of the 2014 International Conference on Food Properties (ICFP2014), Kuala Lumpur,

Malaysia.

6. Liew, S.Q., Chin, N.L. and Yusof, Y.A., Optimization of Pectin Extraction from Passion Fruit Peel using Response Surface

Methodology in proceedings of the 2014 International Conference on Food Properties (ICFP2014), Kuala Lumpur,

Malaysia.

7. M. Saifullah, Y.A. Yusof, N.L. Chin, M.G. Aziz, M.A.P. Mohammed, N.A. Aziz, Tableting and Dissolution Characteristics of

Mixed Fruit Powder in proceedings of the 2nd International Conference on Agricultural and Food Engineering (CAFEi2014),

Hotel Berjaya Times Square, Kuala Lumpur, Malaysia

8. Thing Chai Tham, Ching Lik Hii, Sze Pheng Ong, Nyuk Ling Chin, Luqman Chuah Abdullah, Chung Lim Law, Technical

Review on Crumb Rubber Drying Process and the Potential of Advanced Drying Technique in proceedings of the 2nd

International Conference on Agricultural and Food Engineering (CAFEi2014), Hotel Berjaya Times Square, Kuala Lumpur,

Malaysia

9. P.H. Chong, Y.A. Yusof, M.G. Aziz, N. Mohd. Nazli, N.L. Chin, S.K. Syed Muhammad, Effects of Spray Drying Conditions

of Microencapsulation of Amaranthus gangeticus Extract on Drying Behaviour in proceedings of the 2nd International

Conference on Agricultural and Food Engineering (CAFEi2014), Hotel Berjaya Times Square, Kuala Lumpur, Malaysia

10. Nor Nadiah Abdul Karim Shah, Rosnah Shamsuddin, Russly Abdul Rahman, Noranizan Mohd Adzahan, Effects of

Physicochemical Characteristics of Pummelo Fruit Juice towards UV Inactivation of Salmonella Typhimurium in

proceedings of the 2nd International Conference on Agricultural and Food Engineering (CAFEi2014), Hotel Berjaya Times

Square, Kuala Lumpur, Malaysia

11. A.M. Taufiq, Y.A. Yusof, N.L. Chin, S.H. Othman, A. Serikbayeva, M.G. Aziz, In-Vitro Dissolution of Compressed Tamarind

and Pineapple Powder Tablets in proceedings of the 2nd International Conference on Agricultural and Food Engineering

(CAFEi2014), Hotel Berjaya Times Square, Kuala Lumpur, Malaysia

12. Nasrul Fikry Che Pa, Nyuk Ling Chin, Yus Aniza Yusof, Norashikin Abdul Aziz, Power Ultrasound Assisted Mixing Effects

on Bread Physical Properties in proceedings of the 2nd International Conference on Agricultural and Food Engineering


13. M.R.I. Shishir, F.S. Taip, N.A. Aziz, R.A. Talib, Physical Properties of Spray-dried Pink Guava (Psidium Guajava) Powder

in proceedings of the 2nd International Conference on Agricultural and Food Engineering (CAFEi2014), Hotel Berjaya Times


27


14. C.J. Etti, Y.A. Yusof, N.L. Chin, S. Mohd Tahir, Flowability Properties of Labisia Pumila Herbal Powder in proceedings of

the 2nd International Conference on Agricultural and Food Engineering (CAFEi2014), Hotel Berjaya Times Square, Kuala

Lumpur, Malaysia

15. Mei Ching Tan, Nyuk Ling Chin, Yus Aniza Yusof, Farah Saleena Taip, Jaafar Abdullah, Gel Strength and Stability

Characterization of Ultrasound Treated Whey Protein Foams in proceedings of the 2nd International Conference on

Agricultural and Food Engineering (CAFEi2014), Hotel Berjaya Times Square, Kuala Lumpur, Malaysia

16. Siok Peng Kek, Nyuk Ling Chin, Yus Aniza Yusof, Sheau Wei Tan, Lee Suan Chua, Total Phenolic Contents and Colour

Intensity of Malaysian Honeys from the Apis spp. and Trigona spp. Bees in proceedings of the 2nd International Conference

on Agricultural and Food Engineering (CAFEi2014), Hotel Berjaya Times Square, Kuala Lumpur, Malaysia

17. Fatin Syakirah Ali, Rosnah Shamsudin, Robiah Yunus, The Effect of Storage Time of Chopped Oil Palm Fruit Bunches on

the Palm Oil Quality in proceedings of the 2nd International Conference on Agricultural and Food Engineering (CAFEi2014),

Hotel Berjaya Times Square, Kuala Lumpur, Malaysia

18. Atikah Mansor, Rosnah Shamsudin, Noranizan Mohd Adzahan, Mohd Nizar Hamidon, Efficacy of Ultraviolet Radiation as

Non-thermal Treatment for the Inactivation of Salmonella Typhimurium TISTR 292 in Pineapple Fruit Juice in proceedings

of the 2nd International Conference on Agricultural and Food Engineering (CAFEi2014), Hotel Berjaya Times Square, Kuala

Lumpur, Malaysia

19. Lai Yee Lee, Nyuk Ling Chin, Choh Hock Lim, Yuz Aniza Yusof, Rosnita A. Talib, Saturated Distilled Monoglycerides

Variants in Gel-form Cake Emulsifiers in proceedings of the 2nd International Conference on Agricultural and Food

Engineering (CAFEi2014), Hotel Berjaya Times Square, Kuala Lumpur, Malaysia

20. M.R. Faridatul Ain, Y.A. Yusof, N.L. Chin, Z. Mohd Dom, Storage Study of Arenga Pinnata Juice in proceedings of the 2nd


Malaysia

21. M.F. Zainuddin, S. Rosnah, M. Mohd Noriznan, I. Dahlan, Effect of Moisture Content on Physical Properties of Animal

Feed Pellets from Pineapple Plant Waste in proceedings of the 2nd International Conference on Agricultural and Food


22. Shan Qin Liew, Nyuk Ling Chin, Yus Aniza Yusof, Extraction and Characterization of Pectin from Passion Fruit Peels in

proceedings of the 2nd International Conference on Agricultural and Food Engineering (CAFEi2014), Hotel Berjaya Times


23. Patpen Penjumras, Russly B. Abdul Rahman, Rosnita A. Talib, Khalina Abdan, Extraction and Characterization of

Cellulose from Durian Rind in proceedings of the 2nd International Conference on Agricultural and Food Engineering


24. R. Begum, M.G. Aziz, M.B. Uddin, Y.A. Yusof, Characterization of Jackfruit (Artocarpus Heterophyllus) Waste Pectin as

Influenced by Various Extraction Conditions in proceedings of the 2nd International Conference on Agricultural and Food


25. Nazatul Shima Azmi, Khairul Faezah Md. Yunos, Wastewater Treatment of Palm Oil Mill Effluent (POME) by Ultrafiltration

Membrane Separation Technique Coupled with Adsorption Treatment as Pre-treatment in proceedings of the 2nd


Malaysia

26. N.I. Khalid, N.Ab Aziz, A.A. Nuraini, F.S. Taip, M.S. Anuar, Alkaline Cleaning-in-Place of Pink Guava Puree Fouling

Deposit Using Lab-scale Cleaning Test Rig in proceedings of the 2nd International Conference on Agricultural and Food


27. Yee Bond Tee, Rosnita A. Talib, Khalina Abdan, Nyuk Ling Chin, Roseliza Kadir Basha, Khairul Faezah Md Yunos,

Toughening Poly(Lactic Acid) and Aiding the Melt-compounding with Bio-sourced Plasticizers in proceedings of the 2nd


Malaysia

28. Siti Hajar Othman, Bio-nanocomposite Materials for Food Packaging Applications: Types of Biopolymer and Nano-sized

Filler in proceedings of the 2nd International Conference on Agricultural and Food Engineering (CAFEi2014), Hotel Berjaya

Times Square, Kuala Lumpur, Malaysia

29. Nor Mazlana Main, Rosnita A. Talib, Rushdan Ibrahim, Russly Abdul Rahman, Ainun Zuriyati Mohamed, Suitability of Coir

Fibers as Pulp and Paper in proceedings of the 2nd International Conference on Agricultural and Food Engineering


30. Jumardi Roslan, Khairul Faezah Md. Yunos, Norhafizah Abdullah, Siti Mazlina Mustapa Kamal, Characterization of Fish

Protein Hydrolysate from Tilapia (Oreochromis Niloticus) by-Product in proceedings of the 2nd International Conference on

Agricultural and Food Engineering (CAFEi2014), Hotel Berjaya Times Square, Kuala Lumpur, Malaysia

31. Norazlin Abdullah, Nyuk Ling Chin, Application of Thermosonication Treatment in Processing and Production of High

Quality and Safe-to-Drink Fruit Juices in proceedings of the 2nd International Conference on Agricultural and Food


32. N.Z. Noor Hasnan, N.Ab. Aziz, N. Zulkifli, F.S. Taip, Food Factory Design: Reality and Challenges Faced by Malaysian

SMEs in proceedings of the 2nd International Conference on Agricultural and Food Engineering (CAFEi2014), Hotel Berjaya

Times Square, Kuala Lumpur, Malaysia

28


33. M.A. Ali, Y.A. Yusof, N.L. Chin, M.N. Ibrahim, S.M.A. Basra, Drying Kinetics and Colour Analysis of Moringa Oleifera

Leaves in proceedings of the 2nd International Conference on Agricultural and Food Engineering (CAFEi2014), Hotel

Berjaya Times Square, Kuala Lumpur, Malaysia

34. Alawi Sulaiman, Nasuddin Othman, Azhari Samsu Baharuddin, Mohd Noriznan Mokhtar, Meisam Tabatabaei, Enhancing

the Halal Food Industry by Utilizing Food Wastes to Produce Value-added Bioproducts in proceedings of the 2nd


Malaysia

35. Taufiq A.M., Yusof Y.A., Chin N.L., Othman S.H., Serikbaeva A., Aziz M.G., Effect of Vitamin C Release upon Dissolution

of Pineapple and Tamarind Tablets in proceedings of the National Conference on Agricultural and Food Mechanization

2014 (NCAFM 2014), Kota Kinabalu, Sabah.

36. M. Saifullah, Yusof Y.A., Aziz M.G., Chin N.L., Mohammed M.A.P., Aziz N.A., Dissolution Behaviour of Fast Dissolve

Pitaya and Guava Fruit Powder Tablet in proceedings of the National Conference on Agricultural and Food Mechanization

2014 (NCAFM 2014), Kota Kinabalu, Sabah.

Zainudin M.F., Rosnah S., Mohd Noriznan M., Dahlan I., Effect of Moisture Content on Tensile Strength of Pineapple Waste Pellet

in proceedings of the National Conference on Agricultural and Food Mechanization 2014 (NCAFM 2014), Kota Kinabalu, Sabah.

29


PENERBITAN BUKU

Jabatan Kejuruteraan Awam

1. Bujang B.K.Huat, Arun Prasad, Afshin Asadi, Sina Kazemian,2014,Geotechnics of Organic Soils and Peat,Taylor &

Francis, ISBN 415659418

PENERBITAN BAB DALAM BUKU


1. Omar F. Althuwaynee and Biswajeet Pradhan,2014,An Alternative Technique for Landslide Inventory Modeling Based on

Spatial Pattern Characterization,Geoinformation for Informed Decisions,35-48,A. Abdul Rahman et al. (eds.),Springer

International Publishing Switzerland 2014,978-3-319-03643-4

2. Habibeh Valizadeh Alvan and Shattri Mansor, Earthquake Precursory Signals From Satellite Imagery and

Seismography:A Review,Geoinformation for Informed Decisions,119-,A. Abdul Rahman et al. (eds.),Springer International

Publishing Switzerland 2015,978-3-319-03643-4

Jabatan Kejuruteraan Kimia dan Alam Sekitar

1. Hiroyuki Yoshida, 2014, Chapter 8: Adsorption, Chemical Engineering Web Teaching Material (Advanced) Production,

Public Interest Incorporated Association Publishing

2. Shamsul Izhar, Mohd Halim Shah Ismail and Lee Yuan Chuan, 2014, Chapter 79: Removal of Boron and Arsenic From

Petrochemical Wastewater Using Zeolite as Adsorbent, From Sourcers to Solution, pp 439-443, Springer Publishing, No

ISBN: 978-981-4560-69-6.

3. Azni Idris, Abdul Ghani Liew Abdullah, Yung Tse Hung and Lawrence Wang, 2014, Chapter 13: Wetlands for Wastewater

Treatment and Water Reuse, Volumn 15 Handbook Modern Water Resources Engineering, pp 643-678, Humana Press,

New York Publishing, No ISBN: 978-1-62703-594-1

4. Jing Jing Chang, S. Syafiie, Raja Kamil Raja Ahmad, Thiam Aun Lim, 2014, ANFIS Based Model for Bispectral Index

Prediction, Advances in Intelligent Systems and Computing 287, pp 133-142, Springer Publishing, No ISBN: 978-3-319-

07692-8.

5. Maryam Valizadeh, S. Syafiie, I.S. Ahamad, 2014, Multi-objective Particle Swarm Optimization for Optimal Planning of

Biodiesel Supply Chain in Malaysia, Advances in Intelligent Systems and Computing 287, pp 293-302, Springer Publishing,

No ISBN: 978-3-319-07692-8

6. Mahnaz M. Abdi, Luqman C Abdullah, Paridah M. Tahir, 2014, Chapter 12: Cellulosic Nanomaterials for Sensing

Applications, Handbook of Green Materials- Self and direct-assembling of bionanomaterials, pp 197-212, World Scientific

Publishing, No ISBN: 978-981-4566-46-9

7. Luqman Chuah Abdullah and Yen Chen Tan, 2014, Chapter 84: Case Study: Comparison of Air Dispersion from Solid

Waste Incinerator Emission using AERMOD and ISCST3, From Sourcers to Solution, pp 469-474, Springer Publishing, No

ISBN: 978-981-4560-69-6

Jabatan Kejuruteraan Proses dan Makanan

1. Nyuk Ling Chin, Peter J. Martin, 2014, Rheology of Bread and Other Bakery Products, Bakery Products Science and

Technology, 2nd Edition, Wiley-Blackwell Publishing

PENERBITAN MAJALAH

Jabatan Kejuruteraan Biologi dan Pertanian

1. Wan Ishak Wan Ismail, 2014, Guna telefon pintar periksa tahap kemasakan buah, MegaFokus, Utusan Malaysia, pp 1-4

2. Desa Ahmad, 2014, Mesin Penuai Kenaf, Sains & Teknologi, Utusan Melayu

Jabatan Kejuruteraan Elektrik dan Elektronik

30


1. P Susthita Menon, Mohd Nizar Hamidon, 2014, Report in EDS Mini-Colloquia Organized by the ED Malaysia Chapter,

IEEE Electron Devices Society Newsletter, pp 29-30

Jabatan Kejuruteraan Kimia dan Alam Sekitar

1. Hiroyuki Yoshida, 2014, Functional Materials, Science Megazine, 34(1)

2. Luqman Chuah, 2014, Driven to Innovate, The Star, 27 Ogos 2014

Jabatan Kejuruteraan Proses dan Makanan

1. Farah Saleena Taip, Norashikin Ab Aziz, Zamzuri Zabidin, 2014, The Food Engineering Group in UPM, Jurutera,

2014(11), pp 24-27

2. Chin Nyuk Ling, 2014, Food Factories Visits by AFETD, Jurutera, 2014(11), pp 24-27

3. Rosnah Shamsudin, 2014, Mesin basuh limau bali, Harian Metro, Selasa, 9 Disember 2014, Segmen Agro: V4

4. Rosnah Shamsudin, 2014, Pellet Haiwan Ternakan dari Sisa Bahan Buangan Ladang Nanas, Buletin Nanas (Lembaga

Perindustrian Nanas Malaysia 2014), Buletin Nanas 2014, pp 7

5. Yus Aniza Yusof, 2014, Jurutera Makanan, Utusan Malaysia, Isnin 8 September 2014, Mega: 2

6. Rosnah Shamsudin, 2014, Inovasi dapur solar, Utusan Malaysia, Isnin 17 November 2014, Mega: 1-3

LAIN-LAIN PENERBITAN


1. Abang Abdullah Abang Ali ,Building on Peat; Challenges for Engineers,Peat Technology - Opportunity And Challenges

Seminar - keynote speaker,41651, IBS For Housing Construction

2. Helmi Zulhaidi Mohd Shafri,Mengesan Objek Dari Udara,Utusan Malaysia,17 Mac 2014,4

3. Shattri Mansor,Inmarsat Kesan Isyarat MH370 Selepas Sistem Komunikasi Dimatikan,KOSMO,26 Mac 2014,3

penerbitan jurnal mengikut jabatan$nerbitan...effect of layers and bullet type on impact properties...

Documents