7/28/2019 PDS_NA_GTSPP100_3L.pdf

1/2

CANUSA-CPS is registered to ISO 9001:2008.

Product Data SProduct Data S

For more than 35 years, Canusa-CPS

has been a leading developer and

manufacturer of specialty pipeline

coatings for the sealing and corrosion

protection of pipeline joints and other

s u bs t ra t es . C a nu s a- C PS h i gh

p e r f o r m a n c e p r o d u c t s a r e

manufactured to the highest quality

standards and are available in a number

of configurations to accommodate

many specific project applications.

onshore up to 80C (176C)]

The GTS-PP-100 3L system providesexcellent adhesion and superiorcorrosion protection to polyethyleneand polypropylene coated pipelinesoperating offshore up to 100C (212F)[ . GTS-PP-100 3L sleeve has been designedw i t h a u n i q u e c r o s s l i n k e dpolypropylene backing and a highp e r f o r m a n c e a d he s i v e . T h ecombination allows sleeve installationand bonding to polyethylene andpolypropylene mainline coatings. Lowerpreheats are required versus othersystems and superior bonding isachieved without damaging the coatingduring installation.

Canusa's unique adhesive technologyallows for lower installation pre-heatsand superior bonding to polyethyleneand polypropylene coatings. Theadhesive has been formulated toeffectively bond directly to the mainlinecoating and the steel. The result is asuperior bond to both substrates withquicker application.

Unique Adhesive Technology

Product Description

Features & Benefits

GTS-PP-100 3L3-Layer High Performance Crosslinked PolypropyleneHeat Shrink Sleeve System for the Girth Weld Protection

of Polyolefin Coated Pipelines

Girth-Weld Joi

Applications

Oil & G

Temperature Rang

Pipe Sizes

115 - 1220 (4 - 4

up to 100C (212

up to 80C (176

Configurations

Polypropyle

Offshore Pipelin

3-Lay

Wrapid Sleeve

Superior Shear & Impact Resistance

The GTS-PP-100 3L sleeve has superiorimpact and shear resistance by virtue ofits polypropylene backing. The sleeveis particularly useful in offshoreapplications where in-service impact ise xp ec te d. T he ra pi d c oo li ngcharacteristic of polypropylene allowsbetter resistance to offshore layingrollers.

Lower pre-heat means less timeheating and improved production. Thepre-manufactured sleeve means lesstime in handling, positioning andinstallation. The overall systemminimizes installation time and labourcosts while promoting high productionrates onshore and offshore.

Canusas proven method of force curingthe epoxy primer to the steel allows theinstaller to pre-inspect the joint priorto sleeve application. The epoxy willnot be displaced during the aligning andshrinking stages of the sleeve installa-tion. This provides the assurance thatthe pipe is fully protected. Canusasepoxy primer can be applied to an even,nominal thickness for maximum

corrosion protection.

Rapid & Reliable Installation

Force Cured Epoxy Method

CANUSA-CP

S

- Epoxy

7/28/2019 PDS_NA_GTSPP100_3L.pdf

2/2

anusa warrants that the product conforms to its chemical and physical description and is appropriate for the use stated on the installation guide when used in compliance with Canusas written instructions. Sinceanyinstallationfactors arebeyondour control,the usershalldeterminethe suitabilityof theproducts forthe intended useand assumeall risks andliabilitiesin connection therewith. Canusas liability is stated in the

andardtermsand conditions of sale. Canusamakes no other warranty either expressed or implied.All informationcontainedin this installationguideis to be usedas a guide andis subjectto change withoutnotice.his installation guide supersedesall previousinstallationguides on thisproduct. E&OE

Printed on recycled paper. Recyclable.

ANUSA-CPSSHAWCOR LTD division of .

5 Bethridge RoadRexdale, OntarioM9W 1M7,

anadael: +1 (416) 743-7111ax: +1 (416) 743-5927

Canada U.S.A./Latin AmericaCANUSA-CPS

SHAWCOR INC.a division of2408 Timberloch PlaceBuilding C-8

The Woodlands, Texas77380, U.S.A.

Tel: +1 (281) 367-8866Fax: +1 (281) 367-4304

www.canusacps.com

PDS-GTSPP1003L-rev012

Europe/Middle East Asia/PacificCANUSA SYSTEMS

SHAWCOR UK LIMITEDa division ofUnit 3, Sterling ParkGatwick RoadCrawley, West SussexEngland RH10 9QT

Tel: +44 (1293) 541254Fax: +44 (1293) 541777

CANUSA-CPSSHAWCOR LTD.a division of

#05-31, Blk 52, FrontierUbi Avenue 3Singapore408867

Tel: +65-6749-8918Fax: +65-6749-8919

GTS-PP-100 3Le product selection chart shown here is intended as a guide for standard products.

onsult your Canusa representative for specific projects or unique applications.

How To Order:

BK - Black

L, S

450, 600 mm (18", 24")

Product Name

Pipe Size

Colour

Thickness

115 - 1220 mm (4" - 48")

Sleeve Width

Backing (min. thickness as supplied)

* Non-standard sleeve widths are available from 250mm up to 900mm

Adhesive (min. thickness as supplied)

GTS-PP-100 3L 915-450 BK/L

Dimens

ions

&Ordering

Info

pipesize

sleevewidth

Min. Sleeve Width =50 mmBare St eel Di mens io n + ( 2")

on each side of the pipe joint.

Standard Ordering Options - GTS-PP-100 3L

L Thickness S Thickness

GTS-PP-100 3L

CANUSA

-CPS

Adhesive

Backing

Sleeve

Typical Product Properties

Unit

g/cm

C (F)

N/cm

N/cm

g/cm

Mpa

ohm.cm

--

kV/mm

hours

N/cm

Class C

J/mm

Class C

mm

3

%

Shore D

Test Standard

ASTM D792

ASTM E28

DIN 30672

DIN 30672

DIN 30672

DIN 30672

NF A 49-711

DIN 30672

ASTM G8

ASTM D792

ASTM D638

ASTM D638

ASTM D2240

ASTM D257

ASTM D746

ASTM D149

ASTM D1693

Specific Gravity

Softening Point

Lap Shear @ 23C (73F)

Lap Shear @ 50C (122F)

Peel Strength @ 23C (73F)

Indentation

Impact

Impact Strength

Cathodic Disbondment @ 23C (73F), 28 days

Density

Tensile Strength @ 23C (73F)

Elongation at Break @ 23C (73F)

Hardness

Volume Resistivity

Low Temperature Brittleness @ -40C (-40F)

Di-electric Breakdown Voltage

Stree Crack resistance @ 50 ( 122F)

1.01

124 (255)

52

2.75

> 50

pass

10

pass

< 7

0.93

28

425

65

2 x 10

pass

> 25

2000

17

GTS-PP-100 3L

Sleeve

Opera

ting

Charac

terist

ics

Product Selection Guide

Offshore Pipeline Operating Temperature C (F)

Minimum Installation Temperature C (F)

Resistance to Impact

Resistance to Circumferential Forces

Resistance to Pipe Laying Shear Forces

Resistance to Axial Pipe Movement

Rapid Quenching Ability

Main Line Coating Compatibility

Operating/InstallationTemperatures

100 (212)

90 (194)excellent

excellent

excellent

excellent

excellent

PE, PP

Celsius

100

90

80

70

60

50

Fahrenheit

212

194

176

158

140

122

Impact Resistance (J)

Hardness (Shore D)

0

25

3LPP FBE

50

65

GTS-PP Systems PE HSS Systems

GTS-PP Systems 3LPE HSS

3LPP

1.5 mm (0.060")1.4 mm (0.055)

1.1 mm (0.045")0.9 mm (0.035")