poured in place rubber: aliphatic - gametime sbr rubber, and a wear layer, comprised of ½” thick...

Poured in Place Rubber: Aliphatic

Description

PIP Aliphatic is a great solution for play areas expecting regular use and/or larger numbers of children. It utilizes an aliphatic binder to provide clear bright colors immediately after installation and an upgrade in UV protection. It’s a great alternative for lighter or brighter shades, or school colors where initial ambering is not acceptable.

Aliphatic provides a seamless, accessible play surface, with several color choices that can be laid in patterns, or mixed to create different shades and tones of color. Higher use of black in the color mix can provide cost savings.

The product is easy to clean using a leaf blower to remove loose debris, and a mild soap solution for stains. Repair kits are available for small areas, ask about our maintenance program to maximize the life and performance of your surface.

Benefits

• Uniform, stable accessibility

• Aesthetically pleasing

• Themed graphic inlay options

• Easier cleaning and maintenance

• No initial binder ambering

Tips

• Mix black into your color choice for cost savings

• Mixing at least two colors within a large color field will provide more depth to your overall surface appearance

• Maintenance is required to keep high traffic areas sealed

Basic Specification

Product is comprised of two layers, consisting of an impact layer made of clean, recycled SBR rubber, and a wear layer, comprised of ½” thick EPDM rubber.

Binder is a basic, single component aliphatic agent. Product to be installed over asphalt, concrete, or compacted stone. Temperature should be a minimum of 40-45 degrees Fahrenheit during installation.

Thicknesses will vary to meet specific playground equipment fall heights.

This product meets all applicable ASTM standards. For more information, please refer to our complete product specification.

Basics at a glance:

A high traffic area surface with bright UV resistant color and design options

Price .................................... Mid

Maintenance ....................... Low

Access ................................ High

Color Options ....................... 12+

Warranty ........................ 5 years

1.800.235.2440 www.gametime.comAll colors shown are approximate and may vary nationwide

BlackPurple Blue GreenBright Yellow

Terra Cotta BrownOrange Tan Egg Shell Light

Grey Charcoal 50/50 Mix

Poured in Place Rubber: Aromatic

Description

A popular unitary surface choice, Aromatic provides a seamless, accessible play surface, with several color choices that can be laid in patterns, or mixed to create different shades and tones of color. Higher use of black in the color mix can provide cost savings. Other colors can be mixed to create a depth of color in the overall surface.

PIP Rubber utilizes trained installation crews to produce a surface that is as attractive as it is durable. Since the surface is created on the playground, it is critical that professional and experienced installation crews perform the work.

Although PIP Rubber carries one of the highest initial investment costs, it is often offset by lower maintenance over the life of the product. Because it is a unitary surface, maintenance is reduced to occasional cleaning, and the removal of foreign materials and leaves. Repair kits are available for small areas, ask about our maintenance program to maximize the life and performance of your surface.

Benefits

• Uniform stable route of travel. Attenuating (soft) cushion feeling

• Aesthetically beautiful, offers themed graphic options

• Lower maintenance

• Foreign materials more easily removed than in loose fill surfacing Tips

• Additional color choices may be available in your area

• Mixing less expensive black with your color choices will help reduce costs

• Aromatic binder may amber initially upon absorbing the sun’s UV rays. It eventually wears off with use and the initial vibrant color will reappear


Basic Specification

Product is comprised of two layers, consisting of an impact layer made of clean, recycled SBR rubber; and a wear layer, comprised of virgin EPDM rubber.

Binder is a basic single component aromatic polyurethane agent. Product is to be installed over asphalt, concrete, or compacted stone. Temperature should be a minimum of 40-45 degrees and a maximum of 95 degrees Fahrenheit during installation.



Basics at a glance:

A high traffic area surface with creative color and design options

Price .................................... Mid

Maintenance ....................... Low

Access ................................ High

Color Options ....................... 12+

Warranty ........................ 5 years


BlackPurple Blue GreenBright Yellow

Terra Cotta BrownOrange Tan Egg Shell Light

Grey Charcoal 50/50 Mix

Poured in Place Rubber: Classic

Description

Classic is a good product choice for play areas expecting light to medium traffic. Classic provides a seamless, accessible play surface, available in your choice of three colors, which can be laid in combinations to create graphic patterns in the surface.

All recycled tires used in the manufacture of our surfacing products are cleaned and purified of any steel or metal, to provide a child friendly product. The Cushion Course for this product is SBR rubber, wear course is 3/8” EPDM.

The product meets all applicable ASTM standards, utilizes an aromatic binder, which may amber initially, causing color variation. The product thicknesses can be varied to meet critical fall heights as per specification.

Repair kits are available for small areas, ask about our maintenance program to maximize the life and performance of your surface.

Benefits

• Lower cost poured surface

• Easier maintenance


• Great for light-medium use playgrounds when color variety is not a priority

Tips

• Ideal for low-mid use play areas

• Use a leaf blower to remove debris, and a mild soap solution for stains



Basic Specification

The product is comprised of two layers, consisting of an impact layer made of clean, recycled SBR rubber , and a wear layer comprised of 3/8” thick EPDM rubber granules mixed with a polyurethane binder and liquid pigment.

Product to be installed over asphalt, concrete, or compacted stone. Temperature should be a minimum of 40-45 degrees Fahrenheit during installation.



Basics at a glance:

An affordable surface formulated for small or low-traffic areas

Price .................................... Mid

Maintenance ....................... Low

Access ................................ High

Color Options ......................... 3+

Warranty ........................ 3 years

1.800.235.2440 www.gametime.com

Blue Green 50/50 MixTerra Cotta Red

All colors shown are approximate and may vary nationwide

Poured in Place Rubber: Econo Turf

Description

Econo Turf was specially formulated for small or low-traffic preschool play areas. Poured in a single layer of 100% recycled Styrene Butadiene Rubber (SBR) with an Aromatic binder. EconoTurf provides a seamless, accessible play surface, without the upkeep and maintenance of loose fill options.

Made of recycled tires, it helps keep waste out of landfills, a truly green choice for your playground. All tires used are cleaned and purified of any steel or metal, to provide a child friendly product. Cushion and wear course are a combined single layer of SBR rubber.

The product meets all applicable ASTM standards. EconoTurf is only available for playgrounds with a fall height under 4’, and not recommended for heavy use play areas. Repair kits are available for small areas, ask about our maintenance program to maximize the life and performance of your surface.

Benefits


• Single layer means faster installation



Tips

• This product was only designed for lighter use, and a 4’ maximum fall height

• For early childhood (under 5) play areas only



Basic Specification

The product shall consist of 100% recycled, shredded tire buffings mixed with a polyurethane binder and a specified color pigment which will make up the system. Product to be installed over asphalt, concrete, or compacted stone. Temperature should be a minimum of 40-45 degrees Fahrenheit during installation.

Thicknesses will vary to meet specific playground equipment fall heights, fall attenuation requirements cannot exceed 4’.


Basics at a glance:

An affordable surface formulated for small or preschool play areas

Price ............................Low-Mid

Maintenance ....................... Low

Access ................................ High

Color Options ...........................3

Warranty ........................ 2 years


Blue GreenTerra Cotta Red


Poured in Place Rubber: Pigmented

Description

Pigmented is appropriate for small or low-traffic play areas. It is a two layer surface that carries a fall height rating up to 12’, and may be used on play spaces for children aged 2-5 or 5-12. Pigmented provides a seamless, accessible play surface without the upkeep and maintenance of loose fill options at a lower initial cost than some other poured rubber choices.

The cushion course is SBR rubber, wear course is ½” SBR. The wear course can be pigmented in one of three color choices. All recycled tires used are cleaned and purified of any steel or metal, to provide a child friendly product.

The is easy to clean using a leaf blower to remove loose debris, and a mild soap solution for stains. Repair kits are available for small areas, ask about our maintenance program to maximize the life and performance of your surface.

Benefits




Tips

• Choose only for lower use play areas

• Use a leaf blower to remove debris, and a mild soap solution for stains



Basic Specification

The product is comprised of two layers, consisting of an impact layer made of clean, recycled SBR rubber , and a wear layer comprised of recycled, treated SBR rubber granules mixed with a polyurethane binder and liquid pigment.

Product to be installed over asphalt, concrete, or compacted stone. Temperature should be a minimum of 40-45 degrees Fahrenheit during installation.



Basics at a glance:

An affordable surface formulated for small or low-traffic areas

Price ............................Low-Mid

Maintenance ....................... Low

Access ................................ High

Color Options ...........................3

Warranty ........................ 2 years


Blue GreenTerra Cotta Red


Poured in Place Rubber: Splash Turf

Description

If you’re planning a ground level water play area, you need Splash Turf! Formulated especially for wet play areas, it features a non- absorbent, slip- resistant surface that withstands repeated exposure to water. It is perfect for splash pads, pool decks, and other wet play areas. Choose a single color, or create a fun graphic with two or more colors. Colors can also be mixed together to create variations in shade and tone.

Splash Turf is a single layer system, utilizing the same ultra fine .5 mm granule as our Supreme play surfacing. When used in Splash Turf, these granules create a tight, waterproof bond that is durable, attractive, and perfect for water play fun. The aliphatic binder provides additional wear resistance, UV protection, and color brilliance.

Don’t settle for products that aren’t formulated for water play, choose Splash Turf and get the perfect surface for aquatic fun!

Benefits

• Non slip, non-absorbent

• UV protection

• Withstands repeated exposure to water because it is formulated especially for wet play areas



Tips

• Ask about other colors that may be available in your area


Basic Specification

Product is comprised of a single layer made of 1/2” thick .5 mm TPV granules. Binder is a basic single component, aliphatic agent, with water-resistant poly-urea coating.

Product to be installed over asphalt or concrete. Temperature should be a minimum of 40-45 degrees Fahrenheit during installation.


Basics at a glance:

Made just for water or wet play areas with non slip, non absorbent qualities.

Price .................................. High

Maintenance ....................... Low

Access ................................ High

Color Options ...........................4

Warranty ........................ 2 years


BlueBeige GreenTerra Cotta Red


Poured in Place Rubber: Supreme

Description

The toughest grade of poured rubber available. The wear layer consists of a .5 mm granule, which is much smaller than the standard poured rubber granule, allowing a tighter, more durable bond. This is the toughest surfacing available, perfect for play areas expecting large crowds and heavy use.

The aliphatic binder provides additional durability, as well as UV resistance. Supreme provides a tough, seamless, accessible play surface, in colors that can be laid in patterns, or mixed to create different shades and tones of color.

The product meets all applicable ASTM standards, and is easy to clean using a leaf blower to remove loose debris, and a mild soap solution for stains. Repair kits are available for small areas, ask about our maintenance program to maximize the life and performance of your surface.

Benefits

• The toughest poured rubber available, for high traffic and heavy use

• Colors can be mixed and inlaid to create interest

• Lower maintenance

Tips

• Ask about other colors that may be available in your area


Basic Specification

Product is comprised of two layers, consisting of an impact layer made of clean, recycled SBR rubber, and a wear layer, comprised of ½” thick .5 mm TPV granules.

Binder is a basic, single component aliphatic agent. Product to be installed over asphalt, concrete, or compacted stone. Temperature should be a minimum of 40-45 degrees Fahrenheit during installation.



Basics at a glance:

A high traffic area surface with the maximum durability and warranty available

Price .................................. High

Maintenance ....................... Low

Access ................................ High

Color Options ...........................4

Warranty ........................ 7 years


Blue GreenTerra Cotta Red Beige


Poured in Place Rubber: Thermoplastic

Description

Thermoplastic utilizes Thermo Plastic Vulcanized (TPV) material as the wear layer, providing an upgrade in durability from standard poured surfaces. This makes Thermoplastic a great choice for play areas expecting heavy use. It is offered with your choice of aromatic or aliphatic binder. Ask your GameTime representative which might be a better choice for your surface color.

Thermoplastic is a great choice for playgrounds that will get heavy use, when bright true colors are a priority, as the TPV material is vibrant and brilliant. Cushion Course is SBR rubber, wear course is ½” TPV.

The product meets all applicable ASTM standards, and is easy to clean using a leaf blower to remove loose debris, and a mild soap solution for stains. Repair kits are available for small areas, ask about our maintenance program to maximize the life and performance of your surface.

Benefits

• Bright, vibrant colors

• Upgraded durability

• Choice of aromatic or aliphatic binder

• Uniform stable accessibility

Tips

• Blend colors for additional depth of field

• Choose aliphatic binder for light and bright colors



Basic Specification

Product is comprised of two layers, consisting of an impact layer made of clean, recycled SBR rubber, and a wear layer, comprised of ½” thick TPV.

Binder is a basic, single component, in customer choice of aromatic or aliphatic agent. Product to be installed over asphalt, concrete, or compacted stone. Temperature should be a minimum of 40-45 degrees Fahrenheit during installation.



Basics at a glance:

A high traffic area surface with vibrant color and design options

Price .................................. High

Maintenance ....................... Low

Access ................................ High

Color Options ....................... 12+

Warranty ........................ 5 years


Blue Green Bright Yellow

Terra Cotta BrownOrange Tan Egg Shell Light Grey

CharcoalPurple

poured in place rubber: aliphatic - gametime sbr rubber, and a wear layer, comprised of ½” thick...

Documents