User Manual

CONNECTMOBILITY-E2C PDA Standard Edition English

answers 2

Are there ...

... any technical problems or other questions which you would like to be clarified? Please contact: ● your sales partner ● your sales outlet The latest information on our products, tips, updates, etc., can be found on the internet under: http://www.fujitsu-siemens.com

Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt.

Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.: A26391-K151-Z200-1-7619 Ausgabe/Edition 1 Printed in the Federal Republic of Germany AG 0704 07/04

A26391-K151-Z200-1-7619

CONNECTMOBILITY-E2C PDA Standard Edition

User Manual

Introduction

Getting started

Managing destinations

Managing applications

Managing devices

July 2004 Edition

Microsoft, MS, MS-DOS, Windows and Windows NT are registered trademarks of Microsoft Corporation.

The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A.

Windows Mobile is a trademark of Microsoft Corporation.

All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged.

Copyright © Fujitsu Siemens Computers GmbH 2004

All rights, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole, are reserved.

Offenders will be liable for damages.

All rights, including rights created by patent grant or registration of a utility model or design, are reserved.

Delivery subject to availability. Right of technical modification reserved.

This manual was produced by cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de

A26391-K151-Z200-1-7619, edition 1

Contents Introduction .....................................................................................................................................1 Notational conventions ......................................................................................................................1 System requirements.........................................................................................................................1

Basic requirements ....................................................................................................................1 Supported third party software ...................................................................................................1 Certified devices ........................................................................................................................1 Supported mobile phones ..........................................................................................................1

Overview............................................................................................................................................2 Getting started .................................................................................................................................3 Installing CONNECTMOBILITY .........................................................................................................3 First steps CONNECTMOBILITY.......................................................................................................4 Managing destinations....................................................................................................................5

Editing GPRS / GSM destinations..............................................................................................5 Editing WLAN destinations ......................................................................................................10

Managing applications..................................................................................................................13 Directly starting the application ........................................................................................................13 Add or remove applications .............................................................................................................13 Managing devices..........................................................................................................................17 Editing the GPRS/GSM devices ......................................................................................................17

Bluetooth (BT) mobile phone ...................................................................................................17 CONNECT2AIR GPRS Card ...................................................................................................19 Infrared (IrDA) mobile phone....................................................................................................19 Additional Bluetooth options ....................................................................................................19

Editing the WLAN device settings....................................................................................................20

A26391-K151-Z200-1-7619, edition 1 1

Introduction Notational conventions The meanings of the symbols and fonts used in this manual are as follows:

i

Supplementary information, remarks, and tips follow this symbol.

► Text which follows this symbol describes activities that must be performed in the order shown. "Quotation marks" indicate names of chapters or terms. Texts in italics indicate filenames and menu items.

System requirements Basic requirements ● PDA with Windows Mobile 2003 ● Intel compatible PC with Windows 98, ME, 2000 Pro, XP Pro/Home Edition and

ActiveSync 3.5 or higher installed

Supported third party software ● Microsoft Windows Mobile 2003 Connection Manager ● Certicom movianVPN v4

Certified devices ● Fujitsu Siemens Computers Pocket LOOX 410, 420 ● Fujitsu Siemens Computers Pocket LOOX 710, 720 ● Fujitsu Siemens Computers LOOX 610 (with limited Bluetooth support)

Supported mobile phones ● Siemens S55, Sony Ericsson T610, Sony Ericsson T68 ● Any GPRS mobile phone that supports the AT+CIMI commands

Introduction

2 A26391-K151-Z200-1-7619, edition 1

Overview CONNECTMOBILITY helps you to connect to the Internet or your company intranet quickly and easily. Even complex connection procedures can be automated, e.g.: ● Connecting via modem (i.e. GPRS mobile phone, GPRS CF-Card, �) ● Logging on to your company network over VPN ● Launching follow-up applications (e.g. for email synchronization)

A26391-K151-Z200-1-7619, edition 1 3

Getting started Before installing CONNECTMOBILITY: ● Backup the data on your Pocket PC. ● Make sure the Pocket PC is connected to your PC. ● Make sure ActiveSync is running on your PC and is connected.

Installing CONNECTMOBILITY ● Run Setup.exe in order to install the application on your device.

Getting started

4 A26391-K151-Z200-1-7619, edition 1

First steps CONNECTMOBILITY After the installation is finished you are able to connect to the internet with CONNECTMOBILITY. If you want to configure some specific settings follow the steps below.

Destinations In the Destinations field you can choose the destination to which you want to connect (e.g. the Internet or your corporate network).

i

These destinations are related to the connection device. If, e.g., you choose WLAN only the WLAN destinations are available here.

Applications In the applications field you can choose the application that will be started after the connection is set up (e.g. a browser, a mail client or an FTP client).

Connect / Disconnect Button This button allows you to connect if you are offline and to disconnect if you are online.

Connection devices In the WLAN and GPRS / GSM fields you can choose the device to which you want to connect: ● your WLAN device ● any Bluetooth (BT) capable Mobile

Phone with GPRS ● your CONNECT2AIR GPRS CF Card ● any Infrared (IRdA) capable Mobile

Phone with GPRS

Menubar ● The Config menu allows you to edit your

destinations. ● The HelpButton opens the help dialogue. ● The Information Button shows version

and license information.

A26391-K151-Z200-1-7619, edition 1 5

Managing destinations Normally there is no need to edit the predefined destination of CONNECTMOBILITY because your provider settings are detected automatically. Nevertheless it may be necessary in some cases to manually enter these settings.

Editing GPRS / GSM destinations The following steps explain how to change GPRS / GSM provider specific settings.

► Make sure the destination you want to edit is selected in the destinations field (1).

► Tap Config in the menu bar and choose Edit Destination (2).

The Dial Up Destination Configuration page is displayed.

Managing destinations

6 A26391-K151-Z200-1-7619, edition 1

► Enter a name for the destination (3). ► Choose the desired connection type (4).

(GPRS connection or GSM connection, e.g. for RAS Dial in)

► Choose the connection manager to be used (5). (Microsoft CM in Standard Edition)

► Tap this button to configure your connection in detail (6). (For GPRS see "GPRS configuration", for GSM see "GSM configuration".)

The GPRS or GSM Configuration page is displayed.

GPRS configuration ► If auto detection is active the following

steps are configured automatically (7). In order to configure the GPRS settings manually: ► Enter the GPRS Provider name (8). ► Enter the GPRS phone number (9).

(e.g. *99***1#) ► Enter your GPRS username (10). ► Enter your GPRS password (11). ► Here you can enter the extra dial string (12).

(only for advanced users) or ► You can enter the APN (AccessPoint

Name) and the authentication settings (13). (only for advanced users)

i

Standard edition supports only one auto configuration. If you change your SIM card you have to enter the new settings manually.

Managing destinations

A26391-K151-Z200-1-7619, edition 1 7

GSM configuration ► Enter the phone number you want to dial

(14). ► Enter an extra dial string if necessary (15).

(AT commands) ► Tap here to choose the desired

authentication method (16). On the next screen you are able to choose the authentication method you want to use (Username/Password and Username/RLA supported).

TCP/IP Configuration ► Tap here (17) to enter special TCP/IP

settings .

Managing destinations

8 A26391-K151-Z200-1-7619, edition 1

Servers Configuration ► Tap here (18) to enter your WINS and

DNS servers.

Proxy Configuration ► Tap here (19) to enter your Proxy

settings. ► When you have completed your

configuration tap ok (20). The Save Configuration File page is displayed.

Managing destinations

A26391-K151-Z200-1-7619, edition 1 9

Saving the new configuration ► Tap here (21) to save your new

configuration settings.

Managing destinations

10 A26391-K151-Z200-1-7619, edition 1

Editing WLAN destinations

► Make sure the destination you want to edit is selected in the destinations field (1).

► Tap Config and choose Edit Destination (2).

The WLAN Destination Configuration page is displayed.

► Enter a name for the destination (3). ► Choose the WLAN authentication type (4).

(Shared WEP Key or Open). ► Choose the encryption (5).

(WEP or None). ► Enter the WEP Key if used (6). ► Select your network (7).

Any SSID automatically connects to the first open network available. Specific SSID allows you to specify which network to connect to. Scan allows you to scan the current available networks.

► Check this if you are running in Ad-Hoc mode (device to device). You also need to specify the WLAN Channel in this case (8).

Managing destinations

A26391-K151-Z200-1-7619, edition 1 11

TCP/IP Configuration ► Tap here (9) to enter special TCP/IP

settings.

Servers Configuration ► Tap here (10) to enter your WINS and

DNS servers.

Managing destinations

12 A26391-K151-Z200-1-7619, edition 1

Proxy Configuration ► Tap here (11) to enter your Proxy settings. ► When you have completed your

configuration tap ok (12). The Save Configuration File page is displayed.

Saving the new configuration ► Tap here (13) to save your new

configuration settings.

A26391-K151-Z200-1-7619, edition 1 13

Managing applications CONNECTMOBILITY allows you to configure the applications that will be started after the connection is set up.

Directly starting the application If you want to start an application from the CONNECTMOBILITY application bar simply perform a long press on the desired application and choose Execute from the context menu. The application will be started immediately without checking whether a connection is set up or not.

Add or remove applications In order to add or remove an icon from the application bar follow these steps:

► Tap the wrench on the right of the application bar (1).

The Application Button Configuration page is displayed.

Managing applications

14 A26391-K151-Z200-1-7619, edition 1

► To add a connection select New (2). The page for defining new applications is displayed.

► Enter the file name (including the whole path) of the application you want to add (3).

► Enter commandline parameters if needed (4).

Managing applications

A26391-K151-Z200-1-7619, edition 1 15

► To remove an application select the application and tap Delete (5).

► To change the order of the applications use the up and down arrow (6).

► To edit an existing application choose Edit (7).

► Edit the file name (including the whole path) of the application (8).

► Edit commandline parameters if needed (9).

A26391-K151-Z200-1-7619, edition 1 17

Managing devices Editing the GPRS/GSM devices The above defined GPRS /GSM destinations are available for every GPRS / GSM capable device connected to your PDA. In some cases a few configuration steps are necessary to enable a device.

Bluetooth (BT) mobile phone PocketLOOX 410, 420, 710, 720 In order to connect your Bluetooth (BT) mobile Phone to one of these PDAs simply perform a long press on the BT icon and choose Add/Remove Devices� from the context menu.

PocketLOOX 610 In order to connect your Bluetooth (BT) mobile Phone to the PocketLOOX you have to follow these steps:

► Run Start � Programms � Pocket Plugfree. ► Use the wizard to configure your BT if not

already done. ► Choose your mobile phone (3). The Services page is displayed showing the services available for your mobile phone.

Managing devices

18 A26391-K151-Z200-1-7619, edition 1

► Choose Internet (4).

► Enter any phone number and tap ok in the title bar (5).

► On the next screen just click ok. ► Enter your BT PIN on your mobile phone

and on your PDA. ► After the PDA starts dialing you can

cancel the connection.

Managing devices

A26391-K151-Z200-1-7619, edition 1 19

► After these steps open the context menu for BT by long pressing the Bluetooth icon (9). Your mobile phone will be listed among the devices.

CONNECT2AIR GPRS Card For the CONNECT2AIR GPRS CF-Card no additional configuration is required. Simply enter the card, choose the CF icon and connect to the internet.

Infrared (IrDA) mobile phone For using an IrDA mobile phone simply activate the IrDA interface on your mobile phone. Afterwards you have to choose the IrDA icon. Now you are ready to connect.

Additional Bluetooth options To open the additional Bluetooth options you have to perform a long press on the Bluetooth icon. The context menu shows the following options: ● Bluetooth On � switches the integrated Bluetooth module on ● Bluetooth Off � switches the integrated Bluetooth module off ● All Wireless Off � switches the integrated Bluetooth and WLAN module off ● Deactivate BT on Disconnect � the Bluetooth module will be deactivated after the connection is

closed (good for saving battery time)

Managing devices

20 A26391-K151-Z200-1-7619, edition 1

Editing the WLAN device settings To open the additional WLAN options you have to perform a long press on the WLAN icon. The context menu shows the following options: ● WLAN On � switches the integrated WLAN module on ● WLAN Off � switches the integrated WLAN module off ● All Wireless Off � switches the integrated Bluetooth and WLAN module off ● Deactivate WLAN on Disconnect � the WLAN module will be deactivated after the connection is

closed (good for saving battery time)