pdf online

1

Design, construction and use of septic tanks

http://www.septictank.co.uk

2

Introductionhttp://www.septictank.co.uk

Septic tanks first appeared in France in 1860, and was

invented by Fosse Mouras engineers. So far, the type

of work-site wastewater treatment has been popular

all over the world.

3


Septic tanks can serve for a toilet, a family or group households for wastewater objects such as collective kitchens, restaurants, hotels, resorts, schools, health institutions, offices and establishments breeding and processing of agricultural products, food, etc. ...

4


Septic tanks are widely used in many places because of many advantages such as stable handling performance, even when the wastewater has large fluctuations, occupying a small area, cheap, and the construction, management are simple, so they are easy to be accepted.

5


However, to promote the role of wastewater treatment facilities in place, the engineers need to design, construction, installation and operation management and maintenance of septic tanks properly, especially with conditions in some areas, while most domestic wastewater after primary treatment in septic tank, wastewater is discharged directly into receiving water without going through any of the next stage of treatment.

6


Understanding and work effectively on design, construction installation and operation management - maintenance of septic tanks also contribute to raising awareness and mobilizing community participation in construction, infrastructure management techniques of urban and environmental protection.

7

Construction, installation of septic tankhttp://www.septictank.co.uk

Septic tanks are built of brick, precast reinforced concrete or reinforced concrete poured in place, or made available by materials such as composites, HDPE, ... Septic tanks must be built tight, close, ensure the safety of structures, even in conditions they filled with water or non aqueous media, the impact of the above works and neighboring, the transport, soil and groundwater.

8


Septic tank lid must have at least two holes in the sewage pipes in and out of tanks to manage (check, vacuum residue). The width of the hole at least 200 mm vacuum residue. Suction holes need to be capped, close knit cap with reinforced concrete or plastic, attached with glue, rubber rings threaded with shells or catch basin. Where the septic tank cover set below ground, must have neck knit cap. Ages knit cap is constructed of brick, reinforced concrete or prefabricated plastic, fitted to ensure tight, close.

9


The design of septic tanks up to now have been prehistoric, and so have general septic tank installation methods. The Epurbloc is ground breaking technology, and will hopefully convince other septic tank manufacturers to follow suit and release similar style septic tanks. Until then, the Epurbloc is the undisputed king of the 6 person septic tank.

pdf online

Business