pd205fr-hydrogard_10
DESCRIPTION
http://www.alumascwaterproofing.co.uk/media/18260/pd205fr-hydrogard_10.pdfTRANSCRIPT
![Page 1: pd205fr-hydrogard_10](https://reader030.vdocuments.us/reader030/viewer/2022020220/568bda091a28ab2034a9464b/html5/thumbnails/1.jpg)
ALUMASC EXTERIOR BUILDING PRODUCTS LTD Tel: +44 (0)1744 648400 Fax: +44 (0)1744 648401 Email: [email protected] www.alumascwaterproofing.co.uk
Sheet No: PD205FR
Issued: May 2012
Pages: 1 of 2
Product Datasheet Hydrogard 10
Description Hydrogard 10 is a glass reinforced oxidised bitumen base layer/protection sheet with a sanded finish to both sides. Use a) As a base layer in traditional built-up roofing systems, in both new construction and refurbishment projects. b) As a preparation layer for an Euroroof Impermax warm roof system. c) As a protection sheet over Hydrotech waterproofing. Approvals Not applicable. Application a) Fully bonded in hot bitumen. Not suitable for torch application. b) Bonded in Euroroof PU Membrane Adhesive to the specified insulation boards. Storage Store upright in a clean, dry location, away from heat sources. Fire Rating The overall fire rating (to BS476 pt3:2000) will be determined by the nature of the waterproofing and surfacing applied. Hydrogard 10 is combustible, and once ignited will burn readily and produce dense black smoke. Product Data
Thickness 2.0mm
Width 1.0m
Length 20m
Weight 2.0 kg/m2
Weight per roll 40 kg
Performance Data
Tensile Strength - longitudinal >266 N/50mm
Tensile Strength - transverse >185 N/50mm
Elongation at break - longitudinal
3%
Softening point 80°C
Health & Safety Material Safety Data Sheets are available upon request, and can also be downloaded directly from www.alumascwaterproofing.co.uk
![Page 2: pd205fr-hydrogard_10](https://reader030.vdocuments.us/reader030/viewer/2022020220/568bda091a28ab2034a9464b/html5/thumbnails/2.jpg)
ALUMASC EXTERIOR BUILDING PRODUCTS LTD Tel: +44 (0)1744 648400 Fax: +44 (0)1744 648401 Email: [email protected] www.alumascwaterproofing.co.uk
Sheet No: PD205FR
Issued: May 2012
Pages: 2 of 2
Product Datasheet Hydrogard 10
Technical Support Technical advice is available from Alumasc Technical Services at: Telephone: +44 (0)1744 648400 Facsimile: +44 (0)1744 648401 Email: [email protected] The company pursues a policy of constant product development and information contained in this publication is therefore subject to change without notice. The customer is responsible for ensuring that each product is fit for its intended purpose and that the conditions for use are suitable. All quoted data is nominal and subject to production tolerances.