pcs0534 - skyair 60hz_tcm185-113920
TRANSCRIPT
PCS0534
r e a t io n o fCo m fo r tC
r e
o
AIR CONDITIONING SYSTEM
For high outdoor temperature use
C OOLING ONLY [60 Hz ]
HE AT PUMP [60 Hz ]
The specifications, designs, and information in this brochure are subject to change without notice.
All rights reservedPrinted in Japan 02/05/003 SW •HP •SSc
Ask a qualified installer or contractor to install this product. Do not try to install the product yourself.Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer orcontractor to install those parts and accessories. Use of unauthorized parts and accessories orimproper installation of parts and accessories can result in water or refrigerant leakage, electricalshock, fire or explosion.Read the User's Manual carefully before using this product. The User's Manual provides importantsafety instructions and warnings. Be sure to follow these instructions and warnings.
Warning
For any inquiries, contact your local distributor.
1. Air conditioners should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced.2. If the outdoor unit is to be installed close to the sea shore, direct exposure to the sea breeze should be avoided and choose anoutdoor unit with anti-corrosion treatment.
Cautions on product corrosion
Head Office:Umeda Center Bldg., 4-12, Nakazaki-Nishi2-chome, Kita-ku, Osaka, 530-8323 Japan
Tokyo Office:JR Shinagawa East Bldg., 18-1, Konan2-chome, Minato-ku, Tokyo, 108-0075 Japan
http://www.daikin.com/global/
All Daikin Industries locationsand subsidiaries in Japan havereceived environmentalmanagement system standardISO 14001 certification.
The air conditioners manufacturedby Daikin Industries havereceived ISO 9001 certification forquality assurance.
Certificate Number. JMI-0107JQA-0495JQA-1452
Daikin Industries, Ltd.Domestic GroupCertificate Number. EC99J2044
ISO 14001 is the standard defined by theInternational Organization for Standardization (ISO)relating to environmental management systems.Our group has been acknowledged by aninternationally accredited compliance organisationas having an appropriate programme ofenvironmental protection procedures and activitiesto meet the requirements of ISO 14001.
About ISO 14001
Cooling only
(Type without factory charged refrigerant)
19,1005.6
4,82023,2006.8
5,85027,8008.1
7,00038,90011.4
9,80048,80014.3
12,30053,90015.8
13,50099,60029.2
25,10081,80024.0
20,600163,50047.9
41,200199,40058.4
50,200
2 2.5 3 4 5 6 108 15 20kWCapacityBtu/hkcal/h
FDM03FAVAL FDM04FAVAL FDM05FAVAL FDYM06FAVAL
CEILING MOUNTEDCASSETTE TYPE
CEILING SUSPENDED TYPE
OUTDOOR UNIT
FLOOR STANDING TYPE
WALL MOUNTED TYPE
FA71FVEK FA100FVEK
FV71LAVE FV100LAVE FV125LAVE
R50GVAL R60GVAL R71FUVAL R100FUVALR125FUTAL RU06KTALR140KUTALKR125KUYALK
R140KUYALK
FHC50KVE FHC60KVE FHC71KVE FHC100KVE FH(Y)C125KVE FHYC140KVE
DUCTCONNECTION
MIDDLE STATICPRESSURE TYPE
LOW STATICPRESSURE TYPE
HIGH STATICPRESSURE TYPE
FDB50KVE FDB60KVE FDB71KVE
FH50BVE FH60BVE FH71BVE FH100BVE FH125BVE
FD06KTAL FD08KTAL FD10KTAL FD15KTAL FD20KTALFD03KVAL FD04KVAL FD05KTAL
RU08KTAL RU10KTAL RU08KTAL × 2 RU10KTAL × 2RU08KUTAL RU10KUTAL RU08KUTAL × 2 RU10KUTAL × 2
R50GVAL R60GVAL R140KUTALK/YALKR125FUTAL(R125KUYALK)R100FUVALR71FUVAL
R140KUTALKR125FUTALR100FUVALR71FUVAL
R50GVAL R60GVAL R125FUTALR100FUVALR71FUVAL
R50GVAL R60GVAL
R100FUVALR71FUVAL
R125FUTALR100FUVALR71FUVAL
RU08KUTAL RU10KUTALRU06KTALR125FUTALR100FUVALR71FUVAL
R71FUVAL
RU08KUTAL × 2 RU10KUTAL × 2RU08KTAL RU10KTAL RU08KTAL × 2 RU10KTAL × 2
Page 22Specifications
Page 22Specifications
Page 23Specifications
Page 23Specifications
Page 24Specifications
Page 24Specifications
Page 25– 26Specifications
Page 9– 11
Page 12
Page 14
Page 14
Page 15– 16
Page 17– 18
HP
PACKAGED AIR CONDITIONERS
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitOutdoor unit
Indoor unit
1 2
Notes)•*Capacities of FD series are gross capacities which do not include a deduction for evaporator fan motor heat.*1. The values given on the right are for the FHYC type. Values for other types may differ slightly.The values given for 8HP to 20HP are for the FD type.
*1
TRIPLE MULTI OPERATION
Page 19– 20 Page 27– 28Specifications
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Page 17– 18
75,80022.2
19,10075,80022.2
19,10090,80026.6
22,900
kWBtu/hkcal/h
HP
R200KUYAL
OUTDOOR UNIT
FDYM03FAVAL × 3
FHYC50KVE × 3 FHYC71KVE × 3 FHYC50KVE × 4 FHYC60KVE × 4
FHY50BVE × 3 FHY71BVE × 3 FHY50BVE × 4 FHY60BVE × 4
R200KUYAL R250KUYAL
8 8 106
*1. The values given on the right are for the FHYC type.
*1. The values given on the right are for the FHYC type.
53,90015.8
13,500
R140KUTALK R200KUTAL R200KUTAL R250KUTAL
R140KUTALK R200KUTAL/YAL R200KUTAL/YAL R250KUTAL/YAL
R140KUTALK R200KUTAL/YAL R200KUTAL/YAL R250KUTAL/YAL
R200KUTAL/YAL
Cooling only
3 4
Capacity *1
kWBtu/hkcal/h
HPCapacity *1
CEILING MOUNTEDCASSETTE TYPE
CEILING SUSPENDEDTYPE
DUCT CONNECTIONMIDDLE STATIC PRESSURETYPE
Page 17– 18
OUTDOOR UNIT
CEILING MOUNTEDCASSETTE TYPE
CEILING SUSPENDEDTYPE
DUCT CONNECTIONMIDDLE STATIC PRESSURETYPE
Simultaneous operation system Simultaneous operation systemDOUBLE TWIN MULTI OPERATIONPage 19– 20Page 27– 29Specifications
TWIN MULTI OPERATIONSimultaneous operation systemPage 19– 20
Page 27– 29Specifications
53,90015.8
13,50090,80026.6
22,900
FHYC125KVE × 2FHYC71KVE × 2
FHY71BVE × 2 FHY125BVE × 2
6 10
FDYM05FAVAL × 2
R250KUYAL
R140KUTALK R250KUTAL/YAL
R140KUTALK R250KUTAL/YAL
R250KUTAL/YAL
R140KUTALK R250KUTAL
75,80022.2
19,100
FHYC100KVE × 2
FHY100BVE × 2
8
FDYM04FAVAL × 2
R200KUYAL
R200KUTAL/YAL
R200KUTAL/YAL
R200KUTAL/YAL
R200KUTAL
Simultaneous control with2 units in spacious room
Simultaneous control with3 units for irregularly shaped room
Large room air conditioned bysimultaneous control of fourdistributed units
Simultaneously running2 to 4 units completelydistributes comfort acrosswide spaces.
Heat pump
kWBtu/h
HP
kcal/h38,90011.4
9,80048,80014.3
12,30053,90015.8
13,50019,8005.8
4,99022,2006.5
5,59027,8008.1
7,000
4 5 62 2.5 3
kWBtu/hkcal/h
43,70012.8
11,00055,20016.2
13,90061,90018.1
15,600
75,70022.2
19,100
8
79,20023.2
20,000
92,50027.1
23,300
10
100,70029.5
25,400
148,00043.5
37,400
15
153,00044.8
38,500
181,00053.0
45,600
20
194,00056.8
48,80021,5006.3
5,42024,5007.19
6,18030,6009.0
7,700
Cooling
Heating
FDY08KATAL/YAL FDY10KATAL/YAL FDY15KATAL/YAL FDY20KATAL/YAL
FDYM03FAVAL FDYM04FAVAL FDYM05FAVAL FDYM06FAVAL
FHYC50KVE FHYC60KVE FHYC71KVE FHYC100KVE FHYC125KVE
FHYB71FVAL FHYB100FVAL FHYB125FVAL
FAY100FVE
FVY71LAVE FVY100LAVE FVY125LAVE
RY50GVAL RY60GVAL RY71FUVAL RY100FUVAL RY125FUTAL
FHYC140KVE
LOW STATIC PRESSURETYPE
MIDDLE STATIC PRESSURETYPE
HIGH STATIC PRESSURETYPE
FDYB50KAVE FDYB60KAVE FDYB71KAVE
FHY50BVE FHY60BVE FHY71BVE FHY100BVE FHY125BVE
RY200KUYAL RY250KUYAL RY200KUYAL × 2 RY250KUYAL × 2RY200KUTAL
RY140KUYALKRY140KUTALK RY250KUTAL RY200KUTAL × 2 RY250KUTAL × 2
RY50GVAL RY60GVAL RY71FUVAL RY100FUVAL RY125FUTAL RY140KUTALK/YALK
RY50GVAL RY60GVAL RY71FUVAL RY100FUVAL RY125FUTAL
RY71FUVAL RY100FUVAL RY125FUTAL
RY71FUVAL RY100FUVAL
RY71FUVAL RY100FUVAL RY125FUTAL
RY50GVAL RY60GVAL RY71FUVAL
RY71FUVAL RY100FUVAL RY125FUTAL RY140KUTALK
RY200KUTAL/YAL RY250KUTAL/YAL RY200KUTAL/YAL × 2 RY250KUTAL/YAL × 2
Page 9– 11
Page 12
Page 13
Page 14
Page 14
Page 17– 18
PACKAGED AIR CONDITIONERS
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitIndoor unit
FAY71FVE
5 6
Notes)•*Cooling capacities of FDY series are gross capacities which do not include a deduction for evaporator fan motor heat.*1. The values given on the right are for the FHYC type. Values for other types may differ slightly.The values given for 8HP to 20HP are for the FDY type.
OUTDOOR UNIT
Page 30Specifications
CEILING MOUNTED CASSETTE TYPE
Page 30Specifications
CEILING SUSPENDED TYPE
Page 31Specifications
CEILING MOUNTED BUILT-IN TYPE
Page 31Specifications
WALL MOUNTED TYPE
Page 32Specifications
Page 33Specifications
Page 32Specifications
Page 34Specifications
FLOOR STANDING TYPE
DUCTCONNECTIONPage 15– 16
Capacity *1
Cooling /Heating
Heat pump
Simultaneous control with2 units in spacious room
Simultaneous control with3 units for irregularly shaped room
Large room air conditioned bysimultaneous control of fourdistributed units
Simultaneously running2 to 4 units completelydistributes comfort acrosswide spaces.
53,900/61,90015.8/18.1
13,500/15,60075,800/77,50022.2/22.7
19,100/19,50090,800/97,00026.6/28.4
22,900/24,400
FHYC100KVE × 2 FHYC125KVE × 2FHYC71KVE × 2
FHY71BVE × 2 FHY100BVE × 2 FHY125BVE × 2
6 8
75,800/77,50022.2/22.7
19,100/19,500
8
75,800/77,50022.2/22.7
19,100/19,500
8
10
90,800/97,00026.6/28.4
22,900/24,400
10
FDYM04FAVAL × 2 FDYM05FAVAL × 2
FHYC50KVE × 3 FHYC71KVE × 3
FHY50BVE × 3 FHY71BVE × 3
RY200KUYAL RY250KUYALRY140KUTALK
RY140KUTALK
RY200KUTAL
RY200KUYALRY200KUTAL
RY200KUYALRY200KUTAL
RY250KUTAL
RY250KUYAL
RY140KUTALK RY200KUTAL/YAL RY250KUTAL/YAL
RY140KUTALK RY200KUTAL/YAL RY250KUTAL/YAL
RY200KUTAL/YAL RY250KUTAL/YAL
RY140KUTALK RY200KUTAL/YAL RY200KUTAL/YAL RY250KUTAL/YAL
RY140KUTALK RY200KUTAL/YAL RY200KUTAL/YAL RY250KUTAL/YAL
RY200KUTAL/YAL RY200KUTAL/YAL RY250KUTAL/YAL
RY200KUTAL/YAL
RY250KUTAL
FDYB71KAVE × 3
FHYC50KVE × 4 FHYC60KVE × 4
FHY50BVE X 4 FHY60BVE × 4
FDYM03FAVAL × 3
106
FDYB50KAVE × 4 FDYB60KAVE × 4
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitIndoor unit
53,900/61,90015.8/18.1
13,500/15,600
7 8
TWIN MULTI OPERATIONSimultaneous operation systemPage 19– 20
Page 34– 36Specifications
TRIPLE MULTI OPERATIONSimultaneous operation systemPage 19– 20
Page 34– 36Specifications
Page 19– 20 Page 34– 36Specifications
Simultaneous operation systemDOUBLE TWIN MULTI OPERATION
kWBtu/hkcal/h
HPCapacity *1
CEILING MOUNTEDCASSETTE TYPE
CEILING SUSPENDEDTYPE
DUCT CONNECTIONMIDDLE STATIC PRESSURE TYPE
Cooling /Heating
Outdoor unitIndoor unit
Outdoor unitIndoor unit
Outdoor unitIndoor unit
kWBtu/hkcal/h
HPCapacity *1
CEILING MOUNTEDCASSETTE TYPE
CEILING SUSPENDEDTYPE
DUCT CONNECTIONLOW STATIC PRESSURE TYPE
Outdoor unitIndoor unit
DUCT CONNECTIONMIDDLE STATIC PRESSURE TYPE
Page 17– 18
OUTDOOR UNIT
Page 17– 18
OUTDOOR UNIT
*1. The values given on the right are for the FHYC type.
10
Diffuser
3-Dimensional blade
Quiet design
Compact and aesthetic square panel type
Uses the newly developed "Diffuser Turbo Fan" with applicationof aircraft technology.
Quiet operation is realized by a unified structure of 3-dimensionalblades and air diffuser for arranging the flow of air in the airconditioner.
Uniform panel size for all models.The conventional 100– 140models' rectangular panel types have all beenconverted to the same compact square type as the 50– 71models. Thispermits smooth interior harmony of ceilings with the lighting fixtures.Installation of multiple air conditioners of different capacities will also be
FH(Y)C71K 35 dB 30 dBFH(Y)C125K 42 dB
Indoor unit
Note: Operating sound may increase more than that when used with 3-way air flowor 2-way air flow, or when used together with a optional kit.
High Low
36 dB
Top class of the industry
Super cassette type is more compact, lighter andeasier to install than the conventional types.Maintainability also greatly improved.
Simplifies height adjustment of the mainunit.Adjustment pockets in the four corners ofthe panel make height adjustment of themain unit much easier.
Main unit is lighter and more compact tofurther simplify installation
Because of the light weight, suspension is possible without anupper lift.
Provided with high lift drainwater lift-up mechanism(Increased lift of drain pipe upto 750 mm from the ceiling).
The FH(Y)C50K– 71K are thinmodels (230 mm) which canbe installed in narrow falseceiling space.
Min. 245 mm
FH(Y)C100K– 140K
750 mm
Two Select thermo-sensors
Thermo-sensors on both indoor unit and wired remote con-troller (option). Temperature detection can be set closer tothe living area to further improve comfort level.* Indoor unit's thermo-sensor must be used when the air conditioner is controlled
from another room. (Wireless remote controller does not have a thermo-sensor.)
( FHYC125F)
100~140
50~71
50( )
9
There are 3 patterns in auto swing operation
Swings within the range of 10° to 65°. Swing angle is set from 10° to 40° sopeople are not subjected to strong winds(Recommended where there are seats nearthe air conditioner).
Swing angle is within a range of 30° to 65°
to prevent blowing against the ceiling. (Thisrecommended for those who are particularabout cleanliness of the ceiling).
10° 10°
40° 40°30° 30°
65° 65°
10° 10°
65° 65°
•Has been set to standard setting at time of shipment. This can be changed using the remote control.
Pattern 1 Standard setting
CEILING-MOUNTED CASSETTE TYPE
Sound level
3 5 /3 0 dB[High] [Low]
FHYC71K
CEILING MOUNTED CASSETTE TYPEF H (Y )C 5 0 – 1 4 0 K
Freedom of selection of installation location
Since a multi-flow system is used, 4-way, 3-
way or 2-way air flow can easily be
selected, permitting installation in
locations corresponding to interior
Can also be installed in high ceilings.
Max. 4.2 m
Pattern 2 Draft prevention setting Pattern 3 Setting to prevent soiling of ceiling
Number of air flow outlets used
3-wayair flow
FH(Y)C50K–71K FH(Y)C100K–140K
3.0 m
3.3 m
3.5 m
3.5 m
3.8 m
4-wayair flow
2.7 mStandard
High ceiling
High ceiling
3.0 m
3.5 m
3-wayair flow
3.6 m
4.0 m
4.2 m
2-wayair flow
2-wayair flow
4.2 m
4.2 m
4-wayair flow
3.2 m
3.6 m
4.2 m
Ceilingheight
Note: Set to standard 4-way air flow when shipped.High ceiling types and will be set forremote control operation.
Criteria for ceiling height and number of air flow outlets
Note : For 3-way or 2-way air flow installation,the sealing member (option) for airdischarge outlet must be used toclose off the unused outlet(s).
(FHYC100K–140K)
Wired LCD remote controller Wireless LCD remote controller
A signal rec eiver must beadded to the indoor unit.
Wireless remote c ontroller and signalrec eiver unit are sold as a set.
Note: R emote c ontroller c able notinc luded. C ables must beproc ured loc ally.
Accessory required for indoor unit (option)
BRC1C61
Signal receiver unit(Installed type)
BRC7C613W(for c ooling only type)
BRC7C612W(for heat pump type)
11 12
Soiling of ceiling reduced 30– 40% (compared to conventional models).
Maintenance is simple
Maintenance cost is reduced by using a high-efficiency long-life filtersince maintenance is required only once every 3 years as comparedto once every 2 years as was previously the case.
Maintenance cost reduced since cleaning of the heat exchangeris only necessary once every 3 years.
Cleaning is simple because of the "Non-dew Flap" with no flocking.
Although flocking is presently used on flaps to prevent dewing, thenew flaps are "Non-dew Flaps" that do not soil easily and are easy to
A high efficiency mildew-proof long-life filter is provided asstandard parts. Maintenance not required for about one year(2, 500 hrs).
The ceiling tends to become soiled bydust in the air temporarily blowing outhorizontally when resetting the flap angle.
Thanks to the stepping motor,the flap canbe set to the new setting directlypreventing soiling due to the air flow nothitting the ceiling.
Horizontaldischarge
Newly set angle
Presently set angle
Newly set angle
Stepping motor
Presently set angle
New systemConventional system
Non-dew flap
(Conventional model) (New model)
Once
2years
Once
3years
Heat pump only
(Option)
Fresh air intake kit (Option) Branch duct chamber (Option)
In addition to discharging air from the outlet on the decoration panel,a duct can be connected to the air conditioner itself for an additionaldischarge outlet. The additional discharge outlet is useful for areaswhich tend to be crowded or near doors or windows where thetemperature is affected by the outside temperature.
Note : Intake duct, hood, air filter, insect screen, fireproof damper, etc. must be procured at a local outlet if needed.
Allows intake of fresh air from the outdoors. When neither heatingnor cooling is required, fresh air can be circulated by only using thefan. This is especially useful in buildings in which ventilation fans
Three types of kits are available forspecific installation conditions.For the details, see page.37. Notes : Use only one branch duct chamber per air conditioner.
Close the decoration panel's outlet on the chamber installation side with the sealerfor the air discharge outlet.
Discharge ductBranch duct chamber
Discharge panel
Note :Discharge duct, discharge panel, etc.must be procured at a local outlet ifneeded.
Using the optional accessories produces an even higher level of comfort
Intake ductFresh air intake kit (Outdoor)
Hood
Air filter
3 9 /3 5 dB[High] [Low]
FHY71B
CEILING SUSPENDED TYPECEILING SUSPENDED TYPE
Sound level
Heat pump only
F H (Y )5 0–1 2 5 B
Two Select thermo-sensors
Thermo-sensors on both indoor unit and wired remote con-troller (option). Temperature detection can be set closer tothe living area to further improve comfort level.* Indoor unit's thermo-sensor must be used when the air conditioner is controlled
from another room. (Wireless remote controller does not have a thermo-sensor.)
Auto-swing for comfort in all directions.
Wide air discharge openings produce a spreading 100° air flow.
Installable on ceilings3. 5 m high.
Distributes comforting air flow throughout the room
Upgrade to an even more quiet andcompact system.
Maintenance is simple100°
New model
Two time settings (2500 hrs and 1250 hrs) are available to match the installationenvironment. Maintenance time warning is displayed on the remote controller(filter sign).
Long-life filter lasts about 1 year *Maintenance not required.* For dust concentration of 0.15 mg/m3
Drain-up kit (option) can beeasily incorporated.
Drain-up kit (built inside main unit)
600 mm
Wired LCD remote controller Wireless LCD remote controller
A signal rec eiver must beadded to the indoor unit.
Wireless remote c ontroller and s ignalrec eiver unit are sold as a set.
Note: R emote c ontroller c able notinc luded. C ables must beproc ured loc ally.
Accessory required for indoor unit (option)
BRC1C61 Signal receiver unit(Installed type)BRC7E66
(for c ooling only type)
BRC7E63W(for heat pump type)
1413
CEILING MOUNTED BUILT-IN TYPE
With the use of simple ducts, discharge outlets can belocated in a multitude of ways. Top priority given to interiordecor, built-in type units realize ideal air current distribution.
By separating the air outlet from the main unit and blowing air, variousconditions will be cleared such as in modified stores, state of sunshineand gathering of people to realize comfortable air conditioning.
4 1 /3 5 dB[High] [Low]
FHYB71F
CEILING MOUNTED BUILT-IN TYPEF H Y B 7 1–1 2 5 F
Sound level
Highly Flexible for Various Application
Highly flexible installation is possible with a complete line-up of optional kits to satisfy the various needs, such asthe design concept, interior decoration and so on.
Long-life Filter is provided as a standard accessory.
Drain-up pump is equipped as Standard accessory with250 mm lift.
The unit can be installed, if there is a space of 350 mmabove ceiling. (when suction panel is used.)
Min.350 mm
250 mm
Standard
With duct (case 1)
With duct (case 2)
Cassette style (standard filter)
Cassette style (high efficiency filter)
Long-life filter
Long-life filter
Air suctioncanvas bellows*
Air suction panel*
Installation examples(*Optional parts)
Air suction panel*
Access panel* Access panel*
Access panel*
Air suctioncanvas bellows*
Ceiling returnLong-life filterLong-life filter
Screeningdoor*
Screeningdoor*
High-efficiencyfilter*
(Option)
Wired LCD remote controller
Note: R emote c ontroller c able notinc luded. C ables must beproc ured loc ally.
Accessory required for indoor unit (option)
BRC1C61
WALL MOUNTED TYPE
Wall mounted type units feature the lowest soundlevels in the industry and greatly upgraded comfort,thanks to the high fan speed mode.
"High fan speed mode" for further comfort.If an indoor "High fan speed mode" type unit isinstalled in a long, narrow store or in the cornerof a room,there is approximately a 10% increasein air volume. A comfortable air stream will reachdistant areas.
WALL MOUNTED TYPEF A (Y ) 7 1 /1 0 0 F
4 1 /3 7 dB[High] [Low]
FAY71F(Cooling)
Sound level
FLOOR STANDING TYPE
Floor standing type units are easy to installand maintain; their slimness is suitable forinstallation in high-ceiling stores and offices.
The panel can also be removed and used for remotecontrol such as controlling air conditioning from adifferent room or from near the cashier.
FLOOR STANDING TYPEF V (Y )7 1–1 2 5 L A
4 1 /3 5 dB[High] [Low]
FVY71LA
Sound level
These units are number one in the world in quietness and lightness.The use of a high-efficiency, long-life filter reduces maintenance time and cost.
The heat exchanger has been subjected to antibacterial treatment and mildew proofing.
Filter
Maintenance cycle
Heat exchanger
Parts Previous model New model
Once2 weeks
Once2 year
Once1 year
Once3 year
Heat pump only
Liquid crystal control panel(Standard equipment)
Signal receiver unit
Wired LCD remote controller Wireless LCD remote controller
A signal rec eiver must beadded to the indoor unit.
Wireless remote c ontroller and s ignalrec eiver unit are sold as a set.
Note: R emote c ontroller c able notinc luded. C ables must beproc ured loc ally.
Accessory required for indoor unit (option)
BRC1C61(Installed type)BRC7C69W
(for c ooling only type)
BRC7C64W(for heat pump type)
Heat pump only
16
These duct type air conditioners can be installed in the ceiling spacefor an attractive interior finish. Daikin's middle static pressure duct typeair conditioners are compact and quiet, well-suited for use in a widevariety of duct type air conditioning systems for homes, stores, andoffices.
DUCT CONNECTION MIDDLE STATICPRESSURE TYPEDUCT CONNECTION MIDDLE STATICPRESSURE TYPE F D (Y ) M 0 3 –0 6 F A
[Low]4 2 dBFDM03FA
Sound level
•The duct system allows the most efficient location of discharge outlets inaccordance with the room layout.
Air c onditioner295 mm
Ordinary duc t(proc ured loc ally)
Ordinary duc t(proc ured loc ally)
Air blow Air intake
305 mm or more
Superior freedom of layout
•The standard-equipment rear intake chamber simplifies the ductconnecting work.
•Compact, 295 mm height design makes installation possible where theceiling space is limited.
Note : The under-door cutout method should be used onlywhen there is a small volume of air flow.
Ventilation grille Ventilation grille Under-door cutout
Simultaneous air conditioning of two rooms and ventilation grille (ventilation opening)
Door-installedventilation grille
Wall-installedventilation grille Under-door cutout
When air conditioning two rooms simultaneously, the airdischarged into each room must be circulated back to the airconditioner. To ensure this, a ventilation duct should beinstalled for each room or one of the indicated ventilationgrilles should be installed on the partitioning wall or under thedoor between the rooms.
Ventilates air through thepartitioning wall. (see right)
Partitioning wall
15
Heat pump only
Wired LCD remote controller Wireless LCD remote controller
A signal rec eiver must beadded to the indoor unit.
Wireless remote c ontroller and signalrec eiver unit are sold as a set.
Note: R emote c ontroller c able notinc luded. C ables must beproc ured loc ally.
Accessory required for indoor unit (option)
BRC1C61 Signal receiver unit(Separate type)
BRC4C62 (for heat pump type)
BRC4C64 (for c ooling only type)
Signal receiver unit
Wired LCD remote controller Wireless LCD remote controller
Wireless remote c ontroller and s ignalrec eiver unit are sold as a set.
Note: R emote c ontroller c able notinc luded. C ables must beproc ured loc ally.
BRC1C61(Separate type)
BRC4C62
A signal rec eiver must beadded to the indoor unit.
DUCT CONNECTION LOW STATICPRESSURE TYPE
DUCT CONNECTION HIGH STATICPRESSURE TYPE
By placing the main unit into the false ceiling, the room'sdesign and finish remain beautiful and undisturbed. Togetherwith minimal operating sound,the units are perfect for roomswhere atmosphere is important.
DUCT CONNECTION LOW STATICPRESSURE TYPE F D (Y )B 5 0–7 1 K (A )
High static pressure that allows long duct and longrefrigerant piping enables flexible installation.Recommended for spacious and large-volume areas likelarge stores or factories.
DUCT CONNECTION HIGH STATICPRESSURE TYPE F D (Y )0 3–2 0 K (A )
4 1 /3 8 dB[Low]
FDB50K
[High]
Sound level
Note: The unit shown in the photo is a dedicated cooling type.Switch box dimensions differ for combination cooling/heating type.
[Low]4 6 dBFD03K
Sound level
FD05K FDY15KA
Suction Chamber(standard equipment)
Air Filter (Field supply)fig.1.0.
Heat pump only
Heat pump onlyCooling only
Accessory required for indoor unit (option)
KRC47-2 / KRC47-4 KRC47-1
Digital remote controller Remote controllerFor cooling only type
Wired LCD remote controller Wireless LCD remote controller
Wireless remote c ontroller and signalrec eiver unit are sold as a set.
Note: R emote c ontroller c able notinc luded. C ables must beproc ured loc ally.
BRC1C61
BRC4C62
A signal rec eiver must beadded to the indoor unit.
Signal receiver unit(Separate type)
KRC47-5 KRC47-3
Digital remote controller Remote controller
For heat pump type
For cooling only type
Accessory required for indoor unit (option)
For heat pump type
FDY08-10KA only
1817
Auto-swing Timer selector
High ceilingapplication
Long life filter High fanspeed mode
Twin / triple /double twin multiapplication(See page 19–20)
Program "Dry" Fan operationmode
Mold resistanttreatment for filter
Anti-corrosiontreatment ofoutdoor heatexchanger fins
Self diagnosisfunction
Auto-restart
Ceiling soilingprevention
Fresh air intake
Filter sign
OPTIONALFUNCTIONS
Main functions for extra comfort.*Please look for available functions for the model you select.Greater of corrosion resistance
Construction.
Against acid corrosionAgainst salt corrosion
Non-treated finNon-treated fin
Aluminium
PE fin PE fin
11 5– 6 5– 6Corrosion
resistance grade
AluminiumC orros ion res istanc e ac rylic res in
Hydrophilic film
Also adapts to year-round cooling
RY200KU and RY250KU can adapt up to 0°C.(Heat pump only)
200 and 250 models can be combined forcentralized, horizontal-series installationCommon width and depth make series installation easy.
RU08/10K models are availablein two types depending oninstallation conditionsRU08/10KU models are factory shipped withrefrigerant charged for 5 meters of piping.RU08/10K models are factory shipped with norefrigerant charged.
Outdoor Unit
Two selectthermo-sensors
Draft preventivefunction
Automatic Cool/HeatChange-over
Hot start
R50GR60GRY50G R(Y)71FU R(Y)100/125FU
R(Y)200KU R(Y)250KURU08K(U)R125KU
RU06KR(Y)140KU
RU10K(U)
RY60G
Flexible designfor large room ormulti-use
Piping can be drawn out from three directions - front, left side, or below.
Max. length Max. heightdifference
Pre-charged*1
50 m(Equivalent length 70 m) 30 m
50 m(Equivalent length 70 m) 30 m
5 mR(Y)200KU
5 mR(Y)250KU
Note: 1Additional refrigerant charging is required if the refrigerant pipe islonger than the indicated length.
Allowable refrigerant pipe length and height difference
R(Y)250KU
1280 mm
R(Y)200KU
1280 mm
R(Y)200KU
1280 mm
690 mm
Reduces installation space.Equipped with "high static pressure" fan.
Long hypotenuse blades with a gentle camber make the pressure rise on thesurface of the blades smooth and uniform, while suppressing break away ofthe flow. As a result, it prevents rise in draft resistance produced due to lack ofopen space behind the unit, and prevents air power from dropping.
"Air Flow Adjustment Guide" (standard equipment).Cross-section of "Air Flow Adjustment Guide".
As show in the diagram, the air flow adjustment guide is factory setso that exhaust air flow is inclined 30 degrees. The guide can be setto direct the air flow to the left, right or down as well as upward, soyou can adjust the direction according to the place of installation.
Outdoor units include as standard equipment the "Air Flow AdjustmentGuide" which lets you set as desired the air flow in any one of fourdirections in accordance with your layout. Cushions effect of air flowstriking against obstructions in front of the unit (walls,etc.) and prevents"short circuits" from being formed.
Anti-Corrosion treatment of heat exchange fins.The special acrylic precoated fin (PE fin) for anti-corrosion treatmenton the outdoor unit heat exchanger ensures greater resistance againstsalt damage and atmospheric pollution than ever.
R125KUYALK has been added to the list ofmodels capable of operating with outdoor airtemperatures of up to 54°C.
Long hypotenuse blades(Optimal camber)
500
50
30°
( Applies to R71–125FU and 140KU )
( Applies to R71–125FU and 140KU )
( Applies to all outdoor units )
(Refer to the Specifications for details on other model)