pcomp brochure
TRANSCRIPT
8/2/2019 PComP Brochure
http://slidepdf.com/reader/full/pcomp-brochure 1/2
MesoCoat, the new Duracell of the coa
industry, is a venture-backed nanotech
materials science company, fast becom
world leader in metal protection and r
through their revolutionary ‘long life’ c
and ‘high speed’ cladding technologie
IMAGINE PCmP™Imagine advanced coating materials that are put through the
toughest abuse and still come out shining, coatings that last
longer than us, coatings that are not just good or one applica-
tion but can withstand severe wear, corrosion and thermal con-
ditions in a variety o applications. Imagine coatings that make
the impossible - possible, that increase the lie o components
by 3-20 times and yet are cheaper, lighter, and save us rom the
use o toxic materials.
Applicain
Hard Chrome replacementh
Aerospace and Deenseh
Oil and Gash
Energy Generationh
Processing and Refningh
Chemical and Petrochemicalh
Pulp and Papersh
Other applications to replace tungsten carbide cobalth
Phne: 216.453.0866Fax: 216.404.0054Email: [email protected]
MeCa Inc.24112 Rockwell Drive,Euclid, OH, 44117
www.MEsoCoAt.CoM
TrANsforMING ThE World ThrouGh surfACE ENGINEErING
8/2/2019 PComP Brochure
http://slidepdf.com/reader/full/pcomp-brochure 2/2
PCmP™ CErMETsMicr/Nancmpie CeramicMeallic CmpiePComP™ metal-ceramic coatings replace electrolytic
hard chrome, electroplating, spray and use, and ther-
mal spray carbides; to impart wear and corrosion resis-
tance, and reduce riction in sliding wear applications.
Cermet coatings are easy and ast to apply, and ma-
chine to tight tolerances or dimensional restoration o
OEM or worn E&P components.
Hierarchically srucuredMicr/Nan Cmpie
Near-Nan Cmpie Cre
High Hardness and Wear resistanceh
Contains nano-dispersed riction modifersh
Provides or ast machiningh
Binder Caing
Improves Adhesion and Efciencyh
Provides Toughness and Resiliencyh
Provides Corrosion Resistance and Bondingh
Prevents compositional changes during sprayh
PCmP Prduc LinePCmP™ t-Ht: High Toughness, corrosion resistant Nanostructured
Titanium cermet. It is highly resilient, machines quickly, has very low
riction and replaces chrome and carbides in shat, seal, plunger, and
valve applications. PComP™ T-HH can be machined with alumina or
SiC wheels, and has build-up rates 3-5X that o carbides (cuts spray
time up to 80%); and with its high build rate and low stress can be
readily used to repair worn components up to 0.025 inches.
PCmP™ s: Lower density, spallation-resistant nanocomposite ther-
mal spray coating or chrome replacement in aerospace and other
weight critical applications.
PCmP™ t-HH: Higher hardness wear resistant nanocomposite cer-
met with cobalt-based matrix. It provides higher wear resistancethan T-HT when in contact with drilling mud, with good corrosion
resistance. It is primarily used in sliding wear with environments
that contain suspended solids.
PCmP™ w: Premium High toughness nanoengineered WC-Co sys-
tem. High deposition efciency, and 4-7X the toughness o con-
ventional carbide at 1400-1600VHN. It is ideal or use in valve trim
and seats on gate valves, and in sand erosion and three body wear
environments. Shows 3-7X lie in downhole applications.
Value Prpiin
Lowest lie cycle costh
Drop-In Replacementh
Spray eedstocks, a
patible with most th
equipments
Lower Density produh
spray cell productivity
3-5X grinding efcieh
cost and improves
productivity by 3-5X
burning o high streng
4-10X toughness/duch
dard carbide coatings
lie, reduces risk o in
(spallation)
Up to 100X lower systh
Environmentally-riendh
no hexavalent chrome
Ctm stin
PComP™ nanocomposite thermal spray powders offer an unpar-
alleled combination of toughness, hardness, low friction, and
affordability that provide a unique, patented coating micro-
structure that combines high hardness zones of a ductile metal
in an optimum geometry.
Iea ha Cme repacement
Recent changes in federal acquisition regulations have banned
the purchase of systems and components which have been
treated using hexavalent chrome plating techniques, creating
a burgeoning demand for cost-effective, rapidly deployable
alternatives such as thermal spray cermets within the military
procurement system. PcomP ST is an ideal chrome replacement
in aerospace and other weight critical applications.
EXTrEME CoATINGs. suPrEME rEsu
PCmP™ Cerme
Bin
Nan
www.MEsoCoAt.CoM www.MEs