pcn - welding inspectors (level 1, 2 &3) training and
TRANSCRIPT
Join with us – Exploit and Enrich Yourself
BIT Inspection Technology (NDT/ Welding Consultancy/ Third Party Inspection)
PCN - Welding Inspectors (Level 1, 2 &3)
Training and certification program
In accordance with ISO 17637 “Non‐Destructive testing of welds – Visual testing of fusion‐welded joints”
WHO SHOULD ATTEND?
All personnel responsible for making decisions, exercising judgments applicable to welding operations in power generation, petrochemical, oil and gas, fertilizer, shipbuilding and maintenance, structural fabrication, offshore & onshore structure fabrication, etc.....
Engineer & Inspectors
Quality Control Engineers & Supervisors
Quality Assurance Engineers & Supervisor
Technical Services Engineers & Supervisor
Erection & Construction Engineers & Supervisor
Fabrication Engineers & Supervisor
Chartered Engineers
Engineering and Welding Consultancy
Experienced Welder
Experienced Fabricator
Eligibility requirements for exam and certification:
PCN Welding Inspector
Experience Training
Level 1 1 month * 20 hours
Level 2 12 months * 50 hours
Level 3 2 years experience as Welding Inspector Level 2 (or)
5 years experience having typical job responsibilities of a Welding Inspector Level 3
40 hours
* Relevant weld inspection, welding qualification, material inspection, welding process and etc…
Join with us – Exploit and Enrich Yourself
Examination Content
PCN Welding
Inspector Examination Content Time
Level 1
Theory exam:
30 multiple choice questions 45 minutes
Practical Exam:
Assessment of Fit-up joint as per WPS 30 minutes
Assessment of completed fillet weld 1 hour
Assessment of completed plate groove weld 1 hour
Level 2
Theory exam:
30 multiple choice questions 45 minutes
4 narrative questions 1.5 hours
Practical Exam:
Assessment of joint preparation / Fit-up joint as per WPS 30 minutes
Assessment of completed plate groove weld 1 hour
Assessment of completed fillet weld 1 hour
Assessment of completed pipe groove weld 1.5 hour
Review and report macroscopic test and bend test or fillet fracture test specimen
30 minutes
Level 3
Candidates not holding valid BINDT recognised Weld Inspector certification will be required to successfully complete the Weld Inspection Level 2 examination prior to attempting the examination for Weld Inspection Level 3.
Theory exam:
30 multiple choice questions (questions from NDT Level 2 standard)
1 hour
4 narrative questions 1.5 hours
Practical Exam:
Scrutinise and comment on three inspection related documents
1 hour
Inspection of 2 weld failure samples 1 hour
Understanding of welding fabrication drawing symbols 1 hour
Interpretation of six radiographs of welds. 1.5 hour
Join with us – Exploit and Enrich Yourself
PCN Welding Inspector Schedule 2021
Month Level 1 Level 2 Level 3
Jan ‘ 2021 20.01.2021 - 23.01.2021 20.01.2021 - 25.01.2021 26.01.2021 - 30.01.2021
Feb ‘ 2021 20.02.2021 - 23.02.2021 20.02.2021 - 25.02.2021 26.02.2021 - 29.02.2021
Mar ‘ 2021 20.03.2021 - 23.03.2021 20.03.2021 - 25.03.2021 26.03.2021 - 30.03.2021
Apr ‘ 2021 20.04.2021 - 23.04.2021 20.04.2021 - 25.04.2021 26.04.2021 - 30.04.2021
May ‘ 2021 20.05.2021 - 23.05.2021 20.05.2021 - 25.05.2021 26.05.2021 - 30.05.2021
Jun ‘ 2021 20.06.2021 - 23.06.2021 20.06.2021 - 25.06.2021 26.06.2021 - 30.06.2021
Jul ‘ 2021 20.07.2021 - 23.07.2021 20.07.2021 - 25.07.2021 26.07.2021 - 30.07.2021
Aug ‘ 2021 20.08.2021 - 23.08.2021 20.08.2021 - 26.08.2021 26.08.2021 - 30.08.2021
Sep ‘ 2021 20.09.2021 - 23.09.2021 20.09.2021 - 26.09.2021 26.09.2021 - 30.09.2021
Oct ‘ 2021 20.10.2021 - 23.10.2021 20.10.2021 - 26.10.2021 26.10.2021 - 30.10.2021
Nov ‘ 2021 20.11.2021 - 23.11.2021 20.11.2021 - 26.11.2021 26.11.2021 - 30.11.2021
Dec ‘ 2021 20.12.2021 - 23.12.2021 20.12.2021 - 26.12.2021 26.12.2021 - 30.12.2021
Course Fee - PCN Welding Inspector (Level 1, 2 and 3)
Course Fee per
candidate in INR GST @ 18% Total fee in INR
PCN Welding Inspector Level 1
60000 .00 10800.00 70800.00
PCN Welding Inspector Level 2
70000.00 12600.00 82600.00
PCN Welding Inspector Level 3
80000.00 14400.00 94400.00
Training Faculty R.Baskar, AMIE (Mech),
ASNT NDT Level III RT, UT, PT, MT,VT& ET PCN NDT level 3 RT,PT,MT,UT,PAUT,TOFD ISO NDT Level 3 UT, RT, VT AWS - SCWI CSWIP 3.2 Managing Director – BIT Inspection Technology
www.bitndtindia.com
Contact +91 44 22250317 / +91 9840800863
[email protected] / [email protected] /
www.bitndtindia.com
Join with us – Exploit and Enrich Yourself
Additional Coaching How to perform Welding Procedure Qualification Record ( PQR ) How to prepare Welding Procedure Specification ( WPS ) from existing qualified PQR
How to prepare Welding Procedure Specification ( WPS ) from pre - qualified PQR
How to prepare Proposed Welding Procedure Specification ( pWPS ) Selection of consumable based on base material to be joined
Selection of Joint Design
Selection of welding process
Welding parameters
Welding technique
Other essential variable, supplementary variables, non-essential variables involved in the welding procedure qualification
How to prepare Inspection Test Plan (ITP)
How to prepare Material, Welding & NDT log sheet
How to perform Hydro - testing ( Pressure Testing ) and necessary Test Pack (Documentation)
Final documentation ie, Manufacturing Record Book ( MRB )
How to refer Engineering Drawings General Arrangement Drawing (GA drawing) Isometric Drawing Process Instrumentation Diagram Drawing (P&ID Drawing)
All the above practice based on International code
ASME IX / AWS D1.1 / API 1104
ISO 15614 / ISO 9606
Hand on training conducted at BIT
Inspection Technology, Chennai
Join with us – Exploit and Enrich Yourself
Hand on training conducted at BIT Inspection
Technology Workshop, Chennai
BIT Inspection Technology focus with sincerity and authentic approach in giving
new dimension to NDT / Welding Inspection Training
Join with us – Exploit and Enrich Yourself
Sample Proposed welding Qualification Record (PWPS)
Join with us – Exploit and Enrich Yourself
Sample Proposed Welding Procedure Specification (pWPS)
Join with us – Exploit and Enrich Yourself
Sample Procedure Qualification Record (PQR)
Join with us – Exploit and Enrich Yourself
Sample Welding Procedure Specification (WPS)
Join with us – Exploit and Enrich Yourself
Sample Welder qualification Test Record
Join with us – Exploit and Enrich Yourself
BIT Inspection Technology proudly announces that, the weld defect specimens
and Radiographic films are developed to the customer requirement. Our
specimens and radiographic reference films are used worldwide
Join with us – Exploit and Enrich Yourself
Exchange experience through Case studies
Join with us – Exploit and Enrich Yourself
BIT Training and Accommodation Facility
Join with us – Exploit and Enrich Yourself