pbm-5a mariner · pbm-5a mariner the pbm was designed in the late 1930’s and first deployed in...
TRANSCRIPT
PBM-5A Mariner
The PBM was designed in the late 1930’s and first deployed in 1940 as a sea based U.S. Navy patrol bomber. This versatile seaplane also provided transport for men and material and search and rescue service employing its unique water landing capability. The PBM was a large aircraft carrying a crew of 7 to10 crewmen with a flight range of over 2000 miles.
The Martin Mariner PBM 5A which featured retractable landing gear making it a true amphibian. Martin Mariners served the US Navy and Coast Guard until 1956 when they were retired from service. Many Mariners were sold to private operators and other nations for use by their military services. The last operational Martin Mariner was retired in 1964.
This model represents the only surviving Martin Mariner, PBM 5A owned by the Smithsonian Air and Space Museum and is currently on loan and displayed at the Pima Aerospace Museum in Tucson Az.
Markings included in this kit are:
.S. Navy PBM-5A, BuNo 59849, ca. 1945 U.S. Navy PBM-5A, BuNo 59349, ca. 1947
Minicraft Models (US) LLC, 1501 Commerce Drive, Elgin IL 60123 USA www.minicraftmodels.com
Printed in China
11669
58
84
91
140
10
141
9
62
79
57
SPRUE A
11669
52515354
59
98
97
100
99
27
78
6665
2360
44L 44R
21
139
95
94
24
7675
82
939241L
41R
137136
55
56
8832
8
Parts shaded in gray not for use
67
22
SPRUE B
109
148
143
87
134
135
132
133
142
72L
72R
77
147
SPRUE C
SPRUE D
145 144
149
19
150
68
69
138
108107
18
151
Parts shaded in gray not for use
SPRUE E (Sprue 1 of 2)
101
5083R
83L
83
49
34
70
35
48
43
42
31
40 32
105106
28
45104103
71
2596
61
29 3033 33 1 1
363738
644746
45L 45R
63 39 8174 73
26
102
SPRUE E (Sprue 2 of 2)
101
5083R
83L
83
49
34
70
35
48
43
42
31
40 32
105106
28
45104103
71
2596
61
29 3033 33 1 1
363738
644746
45L 45R
63 39 8174 73
26
102
SPRUE F
146
146
124
125
126
126
116
116
114
76
114
112
112
110
110
128
118 118 118 118 118
118
80
131
67
130 123 90 85 86 89
128
BEFORE BEGINNING ASSEMBLY, PLEASE NOTEThe Minicraft Martin Mariner offers 2 building options.
The first building option pertains to the radar array.
The Mariner carried different radar configurations but external details can be characterized as the physicallylarger early AN/ASP-15 and smaller late production radar. This kit offers the builder a choice
of systems but the aircraft marking options offered only used the earlier AN/ASP-15 (parts B92/93).
SEE STEP 5 for additional important building notes.
The second building option offers the builder a choice of showing the PBM-5A with landing gear deployed (down) or retracted. Building the PBM-5A model with landing gear retracted would represent the
aircraft in flight or as the aircraft would appear in the water.
For proper display of the model representing the airplane on the ground,it is recommended that the model be built with landing gear deployed (down).
SEE STEP 5 for additional important building notes.
COCKPIT1
All Parts
Cockpit floor/Rudder pedals/Control columns/Seats/Support struts
INTERIOR GREEN FS 34151
Instrument panel/Consoles/Trim wheels/ArmrestsFLAT BLACK-GRAY
CementCollerKlebenPegarIncollareColarKleven
DO NOT CementNe pas CollerNicht KlebenNo PegarNon IncollareNao ColarNiet Kleven
Cut awayCouperScheidenCortarTagliereCortarSnijden
Optional partsChoixAuswahlmoglichkeitEleccionSceltaOpacoKeuze
Repeat operationRŽpeeter l' opŽrationVorgang wiederholenRepitir la operacionRipetereRepitir a opera•aoHerhalen
Symmetrical assembly Drill hole
E35
E28
D18
B24
E28
E35
D19
E30E29
E31E32
E25
E34
PLEASE NOTEBefore beginning assembly, take a few moments to review the entire instruction sheet. Your MINICRAFT Mariner
features numerous options which require slight variations in assembly depending on your model's final configuration.It is recommended to "dry-fit" all parts before gluing together. Leave small parts attached to sprue until they
are needed. Paint small parts individually before proceeding with an assembly step.
E26
E25E26
E34
(Parts E29/30/31shown in place)
(Part E32 shown in place)
CREW STATIONS2
All Parts
STARBOARD FUSELAGE3
All Parts
Seat frame INTERIOR GREEN FS 34151
Cockpit area INTERIOR GREEN FS 34151Fuselage interior ZINC CHROMATE YELLOW FS 33481
Wheel well interiors FUSELAGE EXTERIOR COLOR
NOTE: Cockpit details not shown for clarity
Seat padding MEDIUM GREEN
Consoles FLAT BLACK-GRAY
B23
B22
B21E33
F125
F110
F112 F114 F126F116 F118 F118
F118 F128
B66
F67
(Steps 1/2)
B59
F123
A58
PORT FUSELAGE4
F128 F118 F118 F118 F116 F126 F114 F112
F110
F124
A57
B65
F67
Cockpit area INTERIOR GREEN FS 34151Fuselage interior ZINC CHROMATE YELLOW FS 33481
Wheel well FUSELAGE EXTERIOR COLORAll Parts
FUSELAGE ASSEMBLY5
All Parts
NOTEAdd 1 ounce
nose weightin forward fuselage.
If landing gear is to be posed in the down position, open hole in the
left and right fuselage below landing
Refer to Step 28.Open these flashed over holes
on left and right fuselage halvesfor installation of late styleAPS radar (parts B94/B95).
Refer to Step 28.Open this flashed over hole
on left and right fuselage halvesfor installation of EARLY style
APS radar (parts B92/B93).
gear bay (below location of part B65/B66)
BOMB BAY ASSEMBLY 16
All Parts
BOMB BAY ASSEMBLY 27
All Parts
C148 C147
B6B7
All internal parts FUSELAGE EXTERIOR COLORor ZINC CHROMATE YELLOW FS 33481
E4E5
E1
E1
(Part E1 shownin place)
All internal parts FUSELAGE EXTERIOR COLORor ZINC CHROMATE YELLOW FS 33481
BOMB BAY ASSEMBLY 38
All Parts
All internal parts FUSELAGE EXTERIOR COLORor ZINC CHROMATE YELLOW FS 33481
E5
E4
E1
E1
(Part E1 shownin place)
B3B2
BOMB BAY DOORS9
UPPER WING PANELS10
All Parts
All Parts
ENGINE AIR INTAKES11All Parts
F146
E42
E40
E43E45R
E45L
B41L/B44L
B41R/B44R
B136B137
Optional open bomb bay doors
D151
Interior surfaces LIGHT GRAYCooler faces ALUMINUM
D149
D150
F146
All internal parts FUSELAGE EXTERIOR COLORor ZINC CHROMATE YELLOW FS 33481
INTAKES / SPINE LIGHT12
AILERONS / FLAPS13
All Parts
All Parts
TAILPLANE 114
All Parts
Flaps and ailerons may be positionedat neutral position or deflected.
NOTE: L/R inboard & outboard flaps arepositioned symmetrically.
Ailerons deflect in opposite directions.
F130
(E45L/R)
(E45L/R)
(From Step 11)
(From Step 11)
A140
D144
C142
D108
D107
C109
D138
C135
C133
C143/D145(Shown in place)
B139/A141(Shown in place)
C132/C134(Shown in place)
TAILPLANE 215
FINS / RUDDERS16
All Parts
Elevators and rudders may be positioned atneutral position or deflected.
E106
E105
E106
B100
E101 E102
E101
NOTE ALIGNMENT
(E104)
(E103)
(E103)
(E104)
E102
B98
B97
B99
E105
Finished assembly
ENGINE / CRANKCASE / COWLING / COWL FLAPS18
All Parts
WING FLOATS17
All Parts
B54
E50 E50
B55
E39
E46
E47
Crankcase MEDIUM GRAYCylinders ALUMINUM
Cylinder heads BLACKCowl interior LIGHT GRAY
E36
E38Open cowl flaps
E37Closed cowl flaps
B56
B52
B53
B51
STARBOARD (RIGHT) WINGPORT (LEFT) WING
NOTE: Slots on parts 37/38/46/47 key to alignment spline on crankcase (Part 39)
PROPELLERS19
NOSE TURRET20
All Parts
All Parts
E48
A79
B75
E83L
E83E83R
E81
F85
F86
A84
C77
C77
F80
B78
E49
Hub BLACK or ALUMINUMBlades FLAT BLACK with YELLOW tips
Turret interior INTERIOR GREEN FS 34151Gun barrels and receivers GUNMETAL
NOTE: You may elect to attach propellers as thefinal step to avoid damaging them
UPPER TURRET21
All Parts
Turret interior INTERIOR GREEN FS 34151Gun barrels and receivers GUNMETAL
Control panel FLAT BLACK-GRAY
E83L
E83E83R E81
F89F90
TAIL TURRET22
All Parts
Turret interior INTERIOR GREEN FS 34151Gun barrels and receivers GUNMETAL
Control panel FLAT BLACK-GRAY
A10
A62
E61
E61
A10
NOTE:Underside of nose shownAll parts shown in place
Closed position Open position
A9
A9
B8 B8
(F123)
BOMBSIGHT DOORS23
All Parts
NOSE GEAR24
All Parts
Interior UNDERSIDE FUSELAGE COLORor ZINC CHROMATE YELLOW FS 33481
Struts WHITE or ALUMINUMWheel hubs WHITE or ALUMINUM
Tires FLAT BLACK-GRAY
E64
E63E63
E64
E70
E73
E74
C72L/C72R
B60
NOTE:Omit parts E70Finished
Right sideFinishedLeft side
Trim away pin and sand smooth
Trim away pin and sand smooth
E71
MAIN GEAR25
All Parts
OPTIONAL RETRACTED LANDING GEAR26
All Parts
Interior UNDERSIDE FUSELAGE COLORor ZINC CHROMATE YELLOW FS 33481
Struts WHITE or ALUMINUMWheel hubs WHITE or ALUMINUM
Tires FLAT BLACK-GRAY
B60
F131
C87
Tail turret
Upper turret
Nose turret
MAIN COMPONENT ASSEMBLY27
All Parts
RADAR ASSEMBLY28
All Parts
E96
A91
Open flashed overlocating hole
B93
B92
B94B95
E96
11669
U.S. Navy PBM-5A, BuNo 59849, ca. 1945
PAINTSA U.S. Navy Dark Sea Blue (ModelMaster 1718, Acryl 4686)B U.S. Navy Intermediate Blue (ModelMaster 1720, Acryl 4744)C U.S. Navy White (ModelMaster 1745, Acryl 4696)D Black (ModelMaster 1749, Acryl 4768)E Aluminum (ModelMaster 1781, Acryl 4677)
11669
U.S. Navy PBM-5A, BuNo 59349, ca. 1947
Your Minicraft model includes high-quality waterslide decals. These decals adhere best to a glossy surface; and it is recommended that you apply a clear gloss coat over your painted model. Use a sharp scissors or knife to cut individual decals from the carrier sheet. Do not cut into the clear film surrounding the individual decals.
* It is recommended that you apply one decal at a time. * Place the decal section in warm water, when first inserted in the water your decal will curl, after approximately ten seconds the decal will uncurl. Remove from water and lay on a paper towel. After approximately 10 - 20 seconds the decal will slide freely from the backing paper. Use a small brush to help slide the decal from the backing paper and into position on the model. Carefully blot excess water from the decal, using care not to move the decal or tear it. * If you choose to use a setting solution, apply a thin coat over the decal following the manufacturer’s instruction. * Allow the decal to dry overnight. Wash any adhesive residue off the model with a small amount of clean water and dry thoroughly. * Apply clear gloss, matte or flat coat to seal decals following the instructions from the manufacturer.
Visit our Website- www.minicraftmodels.com
Minicraft Models (US) LLC 1501 Commerce Drive
Elgin, IL 60123
Phone: 847-429-9676