patton hermetic condensing unit (nz)
DESCRIPTION
Patton reciprocating hermetic condensing units featuring Copeland compressors. From 1.0 to 5.0 Hp and suitable for R134a & R404A.TRANSCRIPT
www.pattonnz.com
Patton Hermetic Condensing Units
Air CooledCondensing Units
n Reliable and efficient Copeland
reciprocating hermetic compressors
n Generous wide finned, low noise level
condensers supplied with protective
coil coating
n Wide range of factory fitted
accessories available
n Specifically designed for
Australasian conditions
www.pattonnz.com
CCN Low / Medium
CC
N L
OW
/ME
D
1 3.3 hp
CAPACITY (Watts) @ 32°C Ambient
MODELNom.
hpRefrigerant
Evaporating Temp °C
-30 -25 -20 -15 -10 -5 0 5
CCNS100 1.0 R134a 750 1120 1550 2090 2690 3260
R404A 660 1230 1650 2040 2550
CCNS120 1.2 R134a 850 1330 1830 2390 2980 3750
R404A 880 1320 1780 2290 2900
CCNS140 1.4 R134a 950 1460 2040 2700 3440 4260
R404A 1010 1730 2240 2830 3350 4790
CCN140 1.4 R134a 950 1460 2040 2700 3440 4260
R404A 1010 1730 2240 2830 3350
CCNS180 1.8 R134a 1440 2000 2770 3640 4560 5710
R404A 1120 2090 2820 3650 4360 6440
CCN180 1.8 R134a 1440 2000 2770 3640 4560 5710
R404A 1120 2090 2820 3650 4360
CCN200 2.0 R134a 1720 2410 3190 4090 5100 6220
R404A 1860 2500 3170 3950 4660
CCN270 2.7 R134a 2120 3060 4140 5360 6740 8270
R404A 2300 3250 4250 5220 6410
CCN330 3.3 R134a 2960 3680 4820 6180 7610 8900
R404A 2850 3890 4860 5840 6970
www.pattonnz.com
The
com
pany
rese
rves
the
right
to m
ake
spec
ifica
tion
chan
ges
with
out n
otic
e. N
Z 21
/06/
16
1. Fan motors are suitable for 220-240/1/50
2. R404A pump down capacity shown @ 80% full for 32°C liquid temperature
3. Max valve connection size shown. May reduce for different refrigerants & applications
4. All noise level ratings are “free field” based at a distance of 3 metres from source and are given as a guide only
5. *Capacity ratings are based on suction gas returning to compressor @ 20°C, without liquid sub-cooling. Ratings may be increased by approximately 1% for every 1.1°K of sub-cooling
6. Standard condensers fitted. Ratings must not be extrapolated
7. Check with Patton’s nearest outlet for applications outside the specified range
8. Pictured unit configuration subject to change and selected accessory options.
NOTES:
DIMENSIONS
TECHNICAL DATA
CCNS100CCNS120CCNS140CCN140
CCNS180CCN180CCN200
CCN270CCN330
600 570 MC 15 500 MC
750
448
3
0
15
700 15 670 MC
40
800
458
(560
- C
CN
200)
500 MC 15
970 MC 1000
15
470
800 500 MC 15
52
CCNS100CCNS120CCNS140CCN140
CCNS180CCN180CCN200
CCN270CCN330
MC = MOUNTING BOLT CENTERS
D
E
F
C
1 2 3 4
B
A
321 5
C
D
4 6 7 8
A
B
PL01-ASM-CCN01
CRAIG P.
RAY K.
CAMERON W.
WEIGHT:
A3
SHEET 1 OF 1SCALE:
DWG NO.
TITLE:DATESIGNATURENAME
Q.A
MFG
APPV'D
DRAWN
CUT SIZE:
THE DRAWING AND INFORMATION CONTAINEDHEREIN ARE THE EXCLUSIVE PROPERTIES OF PATTON LIMITED. IT SHALL BE RETURNED UPONDEMAND AND SHALL NOT BE REPRODUCED INWHOLE OR IN PART, DISCLOSE TO ANYONE ELSEOR USED WITHOUT THE WRITTEN CONSENT OFPATTON LIMITED.
REVISED BY REV ECN NO.
- -
CHK'D
RAY K.
DESCRIPTION DATE
ECN-21-AUG-2013
CCNS100, CCNS120, CCNS140, CCN140,CCNS180, CCN180, CCN200, CCN270 &CCN330 GA
DD-MM-YY
PROPRIETARY AND CONFIDENTIALNTS (mm)
MC = Mounting Bolt Centers
Accessories not shown
MODEL
COMPRESSOR CONDENSOR RECEIVER CONNECTION (3)Noise Level (dbA)
(4)
Weight (kg)NOM.
hpMODEL VOLTAGE
DISP (cc)
FLA Amps
LRA Amps
Airflow I/sec
Fan Motor (1) Capacity (kg) (2)
Rec. Outlet
Rotolock
Comp. Suction
RotolockWatts Amps
CCNS100 1.0 CS10K6E-PFJ 220-240/1/50 38.1 10.1 55.0 730 145 0.75 3.7 3/8” F.Sw. 3/4” F.Sw. 60 67
CCNS120 1.2 CS12K6E-PFJ 220-240/1/50 44.4 10.9 55.0 730 145 0.75 3.7 3/8” F.Sw. 3/4” F.Sw. 60 67
CCNS140 1.4 CS14K6E-PFJ 220-240/1/50 48.6 12.5 58.0 730 145 0.75 3.7 3/8” F.Sw. 3/4” F.Sw. 60 67
CCN140 1.4 CS14K6E-TFD 380-420/3/50 48.6 4.7 28.0 736 145 0.75 3.7 3/8” F.Sw. 3/4” F.Sw. 60 67
CCNS180 1.8 CS18K6E-PFJ 220-240/1/50 61.4 13.6 64.0 710 145 0.75 3.7 3/8” F.Sw. 3/4” F.Sw. 61 77
CCN180 1.8 CS18K6E-TFD 380-420/3/50 61.4 4.7 33.0 710 145 0.75 3.7 3/8” F.Sw. 3/4” F.Sw. 61 77
CCN200 2.0 CS20K6E-TFD 380-420/3/50 74.3 5.1 40.0 980 260 1.5 3.7 1/2” F.Sw. 3/4” F.Sw. 61 79
CCN270 2.7 CS27K3E-TFD 380-420/3/50 92.4 8.5 41.0 1460 290 1.5 6.2 1/2” F.Sw. 7/8” F.Sw. 64 90
CCN330 3.3 CS33K3E-TFD 380-420/3/50 106.2 9.9 45.0 1460 290 1.5 6.2 1/2” F.Sw. 7/8” F.Sw. 64 92
www.pattonnz.com
CCK Medium / High
CC
K M
ED
/HIG
H
1.75 5 hp
Air CooledCondensing Units
n Reliable and efficient Copeland
reciprocating hermetic compressors
n Generous wide finned, low noise level
condensers supplied with protective
coil coating
n Wide range of factory fitted
accessories available
n Specifically designed for
Australasian conditions
CAPACITY (Watts) @ 32°C Ambient
MODELNom.
hpRefrigerant
Evaporating Temp °C
-25 -20 -15 -10 -5 0 5 10
CCKS175 1.75 R134a 1200 1590 2130 2810 3490 4200
R404A 1250 1710 2180 2710 3310 3940
CCKS200 2.0 R134a 1330 1830 2390 2980 3750 4510
R404A 1320 1780 2290 2900 3380 4230
CCKS225 2.25 R134a 1580 2190 2840 3700 4630 5700
R404A 1820 2420 3050 3720 4380 5250
CCK225 2.25 R134a 1580 2190 2840 3700 4630 5700
R404A 1820 2420 3050 3720 4380 5250
CCKS275 2.75 R134a 2120 2920 3890 4970 6340 7500
R404A 2200 3060 3970 5010 6030 7060
CCK275 2.75 R134a 2120 2920 3890 4970 6340 7500
R404A 2200 3060 3970 5010 6030 7060
CCK300 3.0 R134a 2600 3430 4380 5570 6760 7880
R404A 2720 3490 4330 5460 6460 8150
CCK400 4.0 R134a 3230 4380 5620 7200 8840 10410
R404A 3470 4510 5710 7000 8370 10290
CCK500 5.0 R134a 3980 5210 6700 8510 10130 11650
R404A 4180 5460 6760 8260 9990 12030
www.pattonnz.com
The
com
pany
rese
rves
the
right
to m
ake
spec
ifica
tion
chan
ges
with
out n
otic
e. N
Z 21
/06/
16
1. Fan motors are suitable for 220-240/1/50
2. R404A pump down capacity shown @ 80% full for 32°C liquid temperature
3. Max valve connection size shown. May reduce for different refrigerants & applications
4. All noise level ratings are “free field” based at a distance of 3 metres from source and are given as a guide only
5. *Capacity ratings are based on suction gas returning to compressor @ 20°C, without liquid sub-cooling. Ratings may be increased by approximately 1% for every 1.1°K of sub-cooling
6. Standard condensers fitted. Ratings must not be extrapolated
7. Check with Patton’s nearest outlet for applications outside the specified range
8. Pictured unit configuration subject to change and selected accessory options.
NOTES:
DIMENSIONS
TECHNICAL DATA
NTS (mm)
MC = Mounting Bolt Centers
Accessories not shown
MODEL
COMPRESSOR CONDENSOR RECEIVER CONNECTION (3)Noise Level (dbA)
(4)
Weight (kg)NOM.
hpMODEL VOLTAGE
DISP (cc)
FLA Amps
LRA Amps
Airflow I/sec
Fan Motor (1) Capacity (kg) (2)
Rec. Outlet
Rotolock
Comp. Suction
RotolockWatts Amps
CCKS175 1.75 CS10K6E-PFJ 220-240/1/50 38.1 10.1 55.0 730 145 0.75 3.7 3/8” F.Sw. 3/4” F.Sw. 60 67
CCKS200 2.0 CS12K6E-PFJ 220-240/1/50 44.4 10.9 55.0 980 260 1.5 3.7 3/8” F.Sw. 3/4” F.Sw. 61 70
CCKS225 2.25 CS14K6E-PFJ 220-240/1/50 48.6 12.5 58.0 980 260 1.5 3.7 3/8” F.Sw. 3/4” F.Sw. 61 70
CCK225 2.25 CS14K6E-TFD 380-420/3/50 48.6 4.7 28.0 980 260 1.5 3.7 3/8” F.Sw. 3/4” F.Sw. 61 70
CCKS275 2.75 CS18K6E-PFJ 220-240/1/50 61.4 13.6 64.0 1460 290 1.5 6.2 1/2” F.Sw. 3/4” F.Sw. 64 86
CCK275 2.75 CS18K6E-TFD 380-420/3/50 61.4 4.7 33.0 1460 290 1.5 6.2 1/2” F.Sw. 3/4” F.Sw. 64 86
CCK300 3.00 CS20K6E-TFD 380-420/3/50 74.3 5.1 40.0 1460 290 1.5 6.2 1/2” F.Sw. 3/4” F.Sw. 64 88
CCK400 4.00 CS27K3E-TFD 380-420/3/50 92.4 8.5 41.0 1510 290 1.5 6.2 1/2” F.Sw. 7/8” F.Sw. 62 98
CCK500 5.00 CS33K3E-TFD 380-420/3/50 106.2 9.9 45.0 1470 290 1.5 8.8 5/8” F.Sw. 7/8” F.Sw. 63 108
CCKS175
CCKS275 CCK275 CCK300
CCK500
CCK400
CCKS200 CCKS225 CCK225
600 570 MC 15 500 MC
750
448
3
0
15
700 15 670 MC
40
800
560
500 MC 15
970 MC 1000
15
470
800 500 MC 15
52
CCKS175
CCKS200CCKS225CCK225
CCKS275CCK275CCK300
MC = MOUNTING BOLT CENTERS
D
E
F
C
1 2 3 4
B
A
321 5
C
D
4 6 7 8
A
B
PL01-ASM-CCK01
CRAIG P.
RAY K.
CAMERON W.
WEIGHT:
A3
SHEET 1 OF 1SCALE:
DWG NO.
TITLE:DATESIGNATURENAME
Q.A
MFG
APPV'D
DRAWN
CUT SIZE:
THE DRAWING AND INFORMATION CONTAINEDHEREIN ARE THE EXCLUSIVE PROPERTIES OF PATTON LIMITED. IT SHALL BE RETURNED UPONDEMAND AND SHALL NOT BE REPRODUCED INWHOLE OR IN PART, DISCLOSE TO ANYONE ELSEOR USED WITHOUT THE WRITTEN CONSENT OFPATTON LIMITED.REVISED BY REV ECN NO.
- -
CHK'D
RAY K.
DESCRIPTION DATE
ECN-21-AUG-2013
CCKS175, CCKS200, CCKS225, CCK225,CCKS275, CCK275 & CCK300 GA
DD-MM-YY
PROPRIETARY AND CONFIDENTIAL
600 570 MC 15 500 MC
750
448
3
0
15
700 15 670 MC
40
800
560
500 MC 15
970 MC 1000
15
470
800 500 MC 15
52
CCKS175
CCKS200CCKS225CCK225
CCKS275CCK275CCK300
MC = MOUNTING BOLT CENTERS
D
E
F
C
1 2 3 4
B
A
321 5
C
D
4 6 7 8
A
B
PL01-ASM-CCK01
CRAIG P.
RAY K.
CAMERON W.
WEIGHT:
A3
SHEET 1 OF 1SCALE:
DWG NO.
TITLE:DATESIGNATURENAME
Q.A
MFG
APPV'D
DRAWN
CUT SIZE:
THE DRAWING AND INFORMATION CONTAINEDHEREIN ARE THE EXCLUSIVE PROPERTIES OF PATTON LIMITED. IT SHALL BE RETURNED UPONDEMAND AND SHALL NOT BE REPRODUCED INWHOLE OR IN PART, DISCLOSE TO ANYONE ELSEOR USED WITHOUT THE WRITTEN CONSENT OFPATTON LIMITED.REVISED BY REV ECN NO.
- -
CHK'D
RAY K.
DESCRIPTION DATE
ECN-21-AUG-2013
CCKS175, CCKS200, CCKS225, CCK225,CCKS275, CCK275 & CCK300 GA
DD-MM-YY
PROPRIETARY AND CONFIDENTIAL
600 570 MC 15 500 MC
750
448
3
0
15
700 15 670 MC
40
800
560
500 MC 15
970 MC 1000
15
470
800 500 MC 15
52
CCKS175
CCKS200CCKS225CCK225
CCKS275CCK275CCK300
MC = MOUNTING BOLT CENTERS
D
E
F
C
1 2 3 4
B
A
321 5
C
D
4 6 7 8
A
B
PL01-ASM-CCK01
CRAIG P.
RAY K.
CAMERON W.
WEIGHT:
A3
SHEET 1 OF 1SCALE:
DWG NO.
TITLE:DATESIGNATURENAME
Q.A
MFG
APPV'D
DRAWN
CUT SIZE:
THE DRAWING AND INFORMATION CONTAINEDHEREIN ARE THE EXCLUSIVE PROPERTIES OF PATTON LIMITED. IT SHALL BE RETURNED UPONDEMAND AND SHALL NOT BE REPRODUCED INWHOLE OR IN PART, DISCLOSE TO ANYONE ELSEOR USED WITHOUT THE WRITTEN CONSENT OFPATTON LIMITED.REVISED BY REV ECN NO.
- -
CHK'D
RAY K.
DESCRIPTION DATE
ECN-21-AUG-2013
CCKS175, CCKS200, CCKS225, CCK225,CCKS275, CCK275 & CCK300 GA
DD-MM-YY
PROPRIETARY AND CONFIDENTIAL
15 970 MC
1000
500 MC 15
800
572
5
2
970 MC
1000
15
52
674
500 MC 15 800
CCK400
CCK500
MC = MOUNTING BOLT CENTERS
D
E
F
C
1 2 3 4
B
A
321 5
C
D
4 6 7 8
A
B
PL01-ASM-CCK02
CRAIG P.
RAY K.
CAMERON W.
WEIGHT:
A3
SHEET 1 OF 1SCALE:
DWG NO.
TITLE:DATESIGNATURENAME
Q.A
MFG
APPV'D
DRAWN
CUT SIZE:
THE DRAWING AND INFORMATION CONTAINEDHEREIN ARE THE EXCLUSIVE PROPERTIES OF PATTON LIMITED. IT SHALL BE RETURNED UPONDEMAND AND SHALL NOT BE REPRODUCED INWHOLE OR IN PART, DISCLOSE TO ANYONE ELSEOR USED WITHOUT THE WRITTEN CONSENT OFPATTON LIMITED.
REVISED BY REV ECN NO.
- -
CHK'D
RAY K.
DESCRIPTION DATE
ECN-21-AUG-2013
CCK400 & CCK500 GA
DD-MM-YY
PROPRIETARY AND CONFIDENTIAL