patient trolley model 8000 t3 -...
TRANSCRIPT
8000 T3 is an economic and strong trolley with highlevel of safety. This is a suitable trolley for emergencysituations.
Patient Trolley Model 8000 T3
Technical dataDimensions
Overall . . . . . . . . . . . . . . . . . . . . . 2150mm L x 830mm WMattress platform . . . . . . . . . . . . . 1900mm L x 720mm WHeight from the floor . . . . . . . . . . . . . . . . . . . . . . . 700mm
Side rail level above mattress platform . . . . . . . . . 390mm
Back rest angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75º
Bed weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 kgSafe working load . . . . . . . . . . . . . . . . . . . . . . . . . 250 kg
Castors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150mmWith two independent brakes
Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN 980BS EN 1041
ISO 13485ISO 14971BS 5402
Back rest position canbe adjusted by a crank
Capability of attachingIV stand
150mm highwith two
independent brakes
diameterquality castors
2150mm
1900mm
830mm
720mm
700m
m
10
0m
m
Back rest
49 50
Three ABS mattress platformsThree-bar folding side rails
Pretreatment coating: zinc phosphateFinishing treatment: electrostatic powder coatingBumpers at four cornersPolyurethane rebound foam mattress with water proof coverOxygen capsule holderCentral locking castors (optional)
Innovative mechanism to decrease imposed pressure on crank
Standard Features