patents – za pat.app.2010/01846 design – za des.app.2010/00397 to 2010/00404

9
Patents – ZA PAT.APP.2010/01846 Design – ZA DES.APP.2010/00397 to 2010/00404

Upload: cindy-st-george

Post on 31-Mar-2015

215 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Patents – ZA PAT.APP.2010/01846 Design – ZA DES.APP.2010/00397 to 2010/00404

Patents – ZA PAT.APP.2010/01846 Design – ZA DES.APP.2010/00397 to 2010/00404

Page 2: Patents – ZA PAT.APP.2010/01846 Design – ZA DES.APP.2010/00397 to 2010/00404

- Please follow the given steps in assuring the correct application of the Eazi-Price stickers. - Each step represents a vital part in applying the sticker correctly to the windscreen. - Failure in following the steps may result in incorrect application of the Eazi-Price sticker. - Should you require assistance please find our contact details at the end of the presentation.

EAZI-PRICE WILL NOT TAKE RESPONSIBILITY IN INCORRECT APPLICATION OF STICKERS OR UNDESIRED RESULTS IN STICKER APPLICATION.

Page 3: Patents – ZA PAT.APP.2010/01846 Design – ZA DES.APP.2010/00397 to 2010/00404

Preparation:Wipe windscreen with dry cloth to removeall dust and dampness.

FOLLOW ALL STEPS TO APPLY STICKER(S) CORRECTLY

Page 4: Patents – ZA PAT.APP.2010/01846 Design – ZA DES.APP.2010/00397 to 2010/00404

Preparation:Separate the tape from the backing as shown in the picture on the right.

FOLLOW ALL STEPS TO APPLY STICKER(S) CORRECTLY

Page 5: Patents – ZA PAT.APP.2010/01846 Design – ZA DES.APP.2010/00397 to 2010/00404

Preparation:Align the sticker-tape to the window holding both ends and carefully dropping the oneside then the other.

FOLLOW ALL STEPS TO APPLY STICKER(S) CORRECTLY

Page 6: Patents – ZA PAT.APP.2010/01846 Design – ZA DES.APP.2010/00397 to 2010/00404

Preparation:Press the tape at the points of the lettering using your thumb or a squeegee.

FOLLOW ALL STEPS TO APPLY STICKER(S) CORRECTLY

Page 7: Patents – ZA PAT.APP.2010/01846 Design – ZA DES.APP.2010/00397 to 2010/00404

Preparation:Lift the tape from any end by carefully separating it from the lettering already stuck to the window.

N.B.* Should the lettering lift with the tape, then reattach the tape to the windscreen and re-press the tape and thereafter repeat the process of separating the excess tape.

* To avoid the lifting of vinyl with the tape, pull the tape off gradually from thedirection closest to the windscreen. (this instruction is only for small sticker slides).

FOLLOW ALL STEPS TO APPLY STICKER(S) CORRECTLY

Page 8: Patents – ZA PAT.APP.2010/01846 Design – ZA DES.APP.2010/00397 to 2010/00404

Preparation:Peel excess stickers to form appropriate number.

IMPORTANT:

1. On completion ensure to press sticker digits to the windscreen firmly before walking away to avoid curling in the sun.

2. If dust is not removed from the windscreen before applying the sticker, then it may also result in curling at the points.

FOLLOW ALL STEPS TO APPLY STICKER(S) CORRECTLY

Page 9: Patents – ZA PAT.APP.2010/01846 Design – ZA DES.APP.2010/00397 to 2010/00404

Anwar Bismilla

Cell: 084 674 5089

Tel/Fax: 016 556 3781

Email: [email protected]

Web: www.alifprinters.co.za

Don’t hesitate to contact Eazi-Price with any questions or queries concerning the application of your sticker.