patented universal low silicate formula · 2017-04-29 · volvo/gm heavy truck heavy-duty patented...
TRANSCRIPT
PATENTED UNIVERSAL LOW SILICATE FORMULA
• Freeze-Up Protection To -84˚F
• Boil-Over Protection To 276˚F
• Protects All Cooling System Metals, Including Aluminum, Against Rust And Corrosion
FOR AUTOMOBILES AND HEAVY-DUTY DIESEL ENGINES
Patented Universal Low Silicate Formula
Full Force Antifreeze & Coolant Provides5-Way Protection Against:
Freeze-UpScale Build-UpBoil-Over
Sludge CloggingRust, Corrosion
Specifications:Meets the performance requirements of these specifications:
ASTM D-3306ASTM D-4340Chrysler MS 7170Ford ESE-M97B-44-AG.M. 1825MJohn Deere H24C1SAE J1034
AutomobileASTM D-4985CaterpillarCummins 90T8-4G.M. 1899MJohn Deere H24B1Mack TruckNavistar B1SAE J1941TMC RP 302BVolvo/GM Heavy Truck
Heavy-Duty
Patented Corrosion Protection:Very low corrosion weight changes by standard ASTM Glassware (D-1384), Simulated Service, (D-2570) and Vehicle Service (D-2847) test methods. These methods use the 6 different metals: copper, solder, brass, steel, cast iron and aluminum commonly found in an automotive or truck cooling system. Compatible with all nationally distributed water filters and liquid supplemental coolant additives (SCAs).
Maximum Possible Rating
Aluminum WaterPump Cavitation
Corrosion
Aluminum Radiator Corrosion
Pitting Crevice
FULL FORCEFULL FORCERating
IndustryStandard
Specific Gravity at 60/60˚FBoiling Point, RefluxFoam TestpH, 50% Volume SolutionReserve AlkalinityFlash Point, COCTotal Water, Wt. %Total Glycols, Wt.%Silicon
1.120-1.130325˚ F Min.50 ml./3 sec. Max.10.5 Min. - 11.0 Max.11 ml. Min.250˚ F Min.5% Max.95% Min.250 ppm., Max.
D 1122D 1120D 1881D 1287D 1121D 92D 1123E 202
Chemical PropertiesProperties Typical Values ASTM
Test Method
At sea level atmospheric pressure with 15 lb. pressure cap. The boiling point decreases about 2˚Fper 1,000 feet of altitude and increases about 2.5˚F per pound of pressure developed in the system.
Full Force® Antifreeze & Coolant is a conventional green colored, ethylene glycol based antifreeze formulated for use in automotive and light duty diesel applications. It’s patiented formula protects all engine metals, including aluminum, against damaging rust and corrosion when used as recommended.
PROTECTS FROMFreezing Down to Boiling Up to*
506070
-34˚F-62˚F-84˚F
265˚F270˚F276˚F
% of CoolingSystem Capacity
FREEZE/BOILPROTECTION
CHART
*Using a 15 PSIPressure Cap
0-74804-00905-7
0-74804-10905-4
1-00-74804-00905-4
6/1 Gallon (3.78 Liter)
60 lbs./1.53 cu. ft.
151/2”L X 121/2”W X 121/4”H
36
Part Number
Pallets/Cases Per Truck
Units Per Truck
Truckload Weight*
Pallet Size
Pallet Weight (inc. A/F & pallet)
Cases/Rows High
FFA003
20/720
4,320
44,200 lbs.
48”L X 40”W X 533/4”H
2,210 lbs.
9/4
Gallon UPC Code
Case UPC Code
Case SCC-14 Code
Pack/Unit Case
Weight/Cube
Case Dimensions
Cases Per Pallet
(*) Includes Pallet Wt.: 20 @ 50 lbs. ea. = 1,000 lbs.Product Liability Information/Material Safety Data available upon request.
Old World Industries, Inc.4065 Commercial AvenueNorthbrook, IL 60062-18511-800-323-5440www.peakantifreeze.com FF-Ø4Ø4
Full Force® and the PEAK Mountain Design are Full Force® and the PEAK Mountain Design are registered trademarks of Old World Industries, Inc.registered trademarks of Old World Industries, Inc.©2004 Old World Industries, Inc.©2004 Old World Industries, Inc.
All laws and regulations should be observed when disposing ofAntifreeze/Coolant and Radiator Fluids. Call the EPA or the office of yourstate or local environmental agency for details on disposal procedures.
We Only Have One World…Please Help Protect It.