pat 001 gurucad v5 cabin layout generation en
TRANSCRIPT
-
8/9/2019 Pat 001 Gurucad v5 Cabin Layout Generation En
1/1
B R E A K I N G T H E K N O W L E D G E L I M I T S !
BENEFI T HI GHLI GHTS
GURUCAD V5 CABIN LAYOUTGENERATION product generate inonly few minutes a complete layoutin CATIA V5 2D and 3D.
Automatically position the cabincomponents (Galleys, Lavatories,Seats, Hatracks...) in the aircraft, inCATIA V5 - 2D and 3D. All FAR,JAR requirements concerning cabincomponents can be integrated in thisapplication.
Rendering capabilities can beimplemented for componentsfamilies
GURUCAD V5 CABI N LAYOUT
GENERATI ON
Based on software:CATIA V5
Operating System:Windows, Unix at customer request
Price:
Only the customization andintegration of this application in yourorganization will be subject of fees.
Business Challenges
Aircraft manufactures face the challenge at an early stage of the aircraft definition to
show to their customers a full 3D and 2D layout of the future cabin. Another issue is
to check if the FAR and JAR requirements are meet by the cabin. Rendering
capabilities in simulating the right texture and materials colors can have also a huge
impact in fixing from this early stage of the customer requirements and assuring that
a smaller number of changes will come in the time of the aircraft development.
Solution
GURUCAD V5 CABIN LAYOUT GENERATION product provides a standardized
tool to create an intelligent 2D and 3D layout directly in CATIA V5. All cabin
components can be integrated in this application and also new components types
can be created.
Automatically position the cabin components (Galleys, Lavatories, Seats,
Hatracks...) in the aircraft, in CATIA V5 - 2D and 3D. Positioning of one componentin the cabin is taking less than 1 second (CATIA V5 2D and 3D) depending on the
size and complexity of the models.
Possibility to customize/extend the application to work with any Cabin Interior
Components. Rendering capabilities can be implemented for components families.
All FAR, JAR requirements concerning cabin components can be integrated in this
application.
An XML file will be generated with all the positions of the cabin components so that
the suppliers working with other CAD systems can use this information and
automatically position their components (GURUCAD provide programming services
for up to 7 CAD systems)
Result
GURUCAD V5 CABIN LAYOUT GENERATION product generate in only few
minutes a complete layout in 2D and 3D. FAR and JAR requirements can be
checked and the cabin can be adapted to meet this requirements. The future aircraft
owner can see from early definition stage how the cabin will look and take important
decisions concerning materials and cabin components arrangement.
CATIA V5 Releases
The product is running starting with R14 CATIA V5 Release. All further
CATIA V5 Releases will be fully compatible.
CATIA is registered trademark of Dassault Systemes SA. All rights to this and other usedbrands, trademarks and registered trademarks, lie solely to the respective owners.G
URUCAD
V5
CABIN
LAYO
UTGENERATION
(PAT_
001)
GURUCAD GbR
Schlomhlendamm 1121073 Hamburg, GermanyWeb-Site: www.gurucad.com
GURUCAD IT Division
Tel.: +49 (0) 40 318 132 12Fax: +49 (0) 40 318 132 13E-Mail: [email protected]