parts manual - hackney · hackney-parts manual dear customer: this manual, designed specifically...

Parts Manual

WASHINGTON, N.C. 400 HACKNEY AVE.

P.O. BOX 880

WASHINGTON, N.C. 27889

HACKNEY-PARTS MANUAL Dear Customer: This manual, designed specifically for you, contains descriptions and numbers of parts for Hackney, Mickey, Hesse, and Centennial trucks. We encourage you to use it for ordering. This manual has six main sections: Parts Common to Bodies and Trailers, Exterior and Interior Parts for Bodies and Trailers, Trailer Parts, Optional Equipment, Miscellaneous Items, and Competitor Parts. Within these sections are subdivisions with pictures, drawings and parts lists to aid you in identifying the item you need. We also provide measuring instructions when measurements are necessary and a list of raw material numbers for ordering large pieces and cutting them to size. The Table of Contents will help you locate parts by identifying subdivisions within the manual. An alphabetical index of parts appears at the back for cross-reference purposes. We hope you find this manual helpful. If you desire to order by fax a form is provided in the back. You may of course call in your order or e-mail it. For instructions for safe installation of parts, consult the Hackney Service Manual. If you do not have a Service Manual, you should order one with your parts. To Order by Fax Print one of the forms provided. Fill in the information requested, and fax to Parts Dept. (252) 975-8368 To Order On Line Log on to web page www.hackneyparts.com then follow the instructions. To Order by Phone Call our resident experts toll free direct at (877) 238-7278. (877) BEV-PARTS

HACKNEY-PARTS MANUAL

TABLE OF CONTENTS

Page Parts Common to Bodies and Trailers Door Slat- 5” 2 Door Slat- 3” 3 Door Slat- 2” 4 Door Slat- Bottom New and Old Style 5 Door Slat- Top Rubber and Old Style Felt 6 Door Slat- Top New and Old Style Felt 7 Door Slat- 2.5” Aluminum and Plastic 8 Door Slat- 3” Fingerslot Slat 9 Door Slat- All Raw Material Lengths 10 Counterbalance Parts 11 Counterbalance Asm. For Units Until 1996 12 Counterbalance Asm. For Units 1997 to Current 13 Felt Door Seal 14 Bottom Door Rubber 14 Door Cable 14 Door Rollers 14 Washer- Offset 14 Door Straps 15 Rubber Top Slat Door Seal 15 Rubber Door Stop 15 Footman Door Loop 15 Door Handles 16 Lock Cylinders for Handles 16 Center Case Asm. 16 Combo Door Handles 17 Door Hold Backs 17 Door Keeper 17 Combo Door Seal 17 Combo Rubber Door Stop 17 Aluminum Rear Bumpers 18 Steel Rear Bumpers 19 Aluminum & Steel Rear End/Front Hand Truck Racks 20

HACKNEY-PARTS MANUAL PAGE-1

PARTS COMMON TO BODIES AND TRAILERS


5" DOOR SLATS

BAY Slat Slat Slat

WIDTH Width 5" slat Width 5" slat Width 5" slat 37 38 5/8 29138 38 3/8 67685 37 7/8 30657238 39 5/8 29143 38 7/8 306573

40 41 5/8 29151R 41 3/8 91175R 40 7/8 13121741 42 5/8 29156 42 3/8 62041 41 7/8 30657442 43 5/8 29169R 43 3/8 91125R 42 7/8 13121843 44 5/8 29174R 44 3/8 91077R 43 7/8 13121944 45 5/8 29179 45 3/8 91055 44 7/8 30657545 46 5/8 29184 46 3/8 91083R 45 7/8 13122046 47 5/8 29189 47 3/8 91186R 46 7/8 30657647 48 5/8 29194 48 3/8 73092R 47 7/8 30657748 49 5/8 29199 49 3/8 91062R 48 7/8 13122150 51 5/8 29209 51 3/8 67660 50 7/8 30657851 53 5/8 29224R 53 3/8 68516R 52 7/8 13122354 55 5/8 29234 55 3/8 69446R 54 7/8 13024255 56 5/8 29243 56 3/8 73492 55 7/8 30657956 57 5/8 29248 57 3/8 69734R 56 7/8 13024157 58 5/8 29253R 58 3/8 6953858 59 3/8 67798R

59 60 5/8 29263 60 3/8 63691R 59 7/8 306580

60 61 5/8 29268 61 3/8 68595 60 7/8 30658161 62 5/8 29273R 62 3/8 91115 61 7/8 13122462 63 5/8 29278 63 3/8 68981R 62 7/8 30658268 69 5/8 29315 69 3/8 64690R 68 7/8 306583

NOTE- Slats with a 5/8” pattern were used until 1992. Slats with a 3/8” pattern were used from 1992-1996 and slats with a 7/8” pattern were used from 1996 to current. NOTE- There is exceptions to the slat pattern within the years, especially in change over years. Please measure the slat. NOTE- Part numbers in italic are stock.

NOTE- Measure the face of slat to determine if it is a 5”, 3”, etc.


3" SLATS

BAY Slat Slat Slat

WIDTH Width 3" slat Width 3" slat Width 3" slat 37 38 5/8 29139 38 3/8 73296 37 7/8 30658438 39 5/8 29144 38 7/8 306585

40 41 5/8 29152R 41 3/8 91180R 40 7/8 13123041 42 5/8 29157 42 3/8 40590 41 7/8 30658642 43 5/8 29170R 43 3/8 91126R 42 7/8 13123143 44 5/8 29175R 44 3/8 69498R 43 7/8 13123244 45 5/8 29180 45 3/8 76360 44 7/8 30658745 46 5/8 29185 46 3/8 91466 45 7/8 13123346 47 5/8 29190 47 3/8 73409 46 7/8 30658847 48 5/8 29195 48 3/8 73093 47 7/8 30658948 49 5/8 29200 49 3/8 64792 48 7/8 13123450 51 5/8 29210 51 3/8 78418 50 7/8 30659051 53 5/8 29225R 53 3/8 91285R 52 7/8 13123654 55 5/8 29235 55 3/8 69452R 54 7/8 13018055 56 5/8 29244 56 3/8 77748 55 7/8 30659156 57 5/8 29249 57 3/8 69735R 56 7/8 13017557 58 5/8 29254R 58 3/8 73417R58 59 3/8 91979R

59 60 5/8 29264 60 3/8 76450 59 7/8 30659260 61 5/8 29269 61 3/8 68979 60 7/8 30659361 62 5/8 29274R 62 3/8 69504R 61 7/8 13123762 63 5/8 29279 63 3/8 69826 62 7/8 30659468 69 5/8 29316 69 3/8 64691 68 7/8 306595


NOTE- Measure face of slat to determine if it is a 5”, 3”, etc.


BAY Slat Slat

WIDTH Width 2" slat Width 2" slat

37 38 3/8 73480 37 7/8 306596

38 38 7/8 306597

40 41 3/8 91183R 40 7/8 306598

41 42 3/8 94081 41 7/8 306599

42 43 3/8 91453R 42 7/8 131244

43 44 3/8 91244R 43 7/8 131245

44 45 3/8 91056 44 7/8 306600

45 46 3/8 63683 45 7/8 131246

46 47 3/8 91217 46 7/8 306601

47 48 3/8 67869 47 7/8 306602

48 49 3/8 91063R 48 7/8 131247

50 51 3/8 76535R 50 7/8 306603

51 53 3/8 68517R 52 7/8 131249

54 55 3/8 69806 54 7/8 306604

55 56 3/8 75928 55 7/8 306605

56 57 3/8 73040 56 7/8 306606

57 58 3/8 73678R

58 59 3/8 79227R

59 60 3/8 63692R 59 7/8 306607

60 61 3/8 68596 60 7/8 306608

61 62 3/8 91507R 61 7/8 131250

62 63 3/8 91052R 62 7/8 306609

2” SLATS

NOTE- Slats with a 5/8” pattern were used until 1992. Slats with a 3/8” pattern were used from 1992-1996 and slats with a 7/8” pattern were used from 1996 to current. NOTE- There is exceptions to the slat pattern within the years, especially in change over years. Please measure slats. NOTE- Part numbers in italic are stock.

NOTE- Measure face of slat to determine if it is a 3”, 2”, etc.

68 69 3/8 64692R 68 7/8 306610


BOTTOM SLAT 2.5”

BAY Slat Btm Slat Btm Slat Btm

WIDTH Width slat BHWC Width slat BHWC Width slat BHWC 37 38 5/8 29142 12690 38 3/8 67687 37 7/8 306527 30650738 39 5/8 29146 38 7/8 306528 306508

40 41 5/8 29155R 10384R 41 3/8 91177R 96143R 40 7/8 129617 30650941 42 5/8 29160 11209 42 3/8 62043 41 7/8 306529 30651042 43 5/8 29173 11207 43 3/8 91128R 94653R 42 7/8 129615 306511

43 44 5/8 29178 16606 44 3/8 91079R 108492 43 7/8 131268 30651244 45 5/8 29183 11205 45 3/8 91058 44 7/8 306530 30651345 46 5/8 29188 11211 46 3/8 91085R 108479K 45 7/8 131269 30651446 47 5/8 29193 11213 47 3/8 91188 323403 46 7/8 306531 30651547 48 5/8 29198 11215 48 3/8 73095 47 7/8 306532 30651648 49 5/8 29203 11217 49 3/8 91065R 95279R 48 7/8 129608 30651750 51 5/8 29213 11219 51 3/8 67662 103340 50 7/8 306533 30651851 53 5/8 29228R 10887 53 3/8 68520R 90322R 52 7/8 124640 30745354 55 5/8 29238 12861 55 3/8 69448R 95979R 54 7/8 130178 30651955 56 5/8 29247 11221 56 3/8 73494 306972 55 7/8 306534 30652056 57 5/8 29252 11223 57 3/8 69737R 94642R 56 7/8 130173 30652157 58 5/8 29257R 323554 58 3/8 69540 103759K 58 59 3/8 67800 59 60 5/8 29267 11229 60 3/8 63700R 119063K 59 7/8 306535 30652260 61 5/8 29272 11225 61 3/8 94876 117491K 60 7/8 306536 30652361 62 5/8 29277 10889 62 3/8 91117R 102158R 61 7/8 131271 30652462 63 5/8 29282 11227R 63 3/8 68983R 95178R 62 7/8 306537 30652568 69 5/8 29318 11233 69 3/8 64694 110460K 68 7/8 306538 306526

NOTE- Slats with a 5/8” pattern were NOTE- There is exceptions to the slat NOTE- Part numbers in used until 1992. Slats with a 3/8” pattern within the years, especially in italic are stock. pattern were used from 1992-1996 and change over years. Please measure slats with a 7/8” pattern were from the slat. 1996 to current.

NOTE- The bottom slats with hardware include a cable, strap, bottom door seal, and 2 rollers and a footman loop. NOTE- See pictures to left to determine which type of bottom slat you have.

Old Style- Used Prior to 1996. 5/8 & 3/8 Pattern Slats.

New Style- Used 1997 to Current. 7/8 Pattern Slats.

HACKNEY-PARTS MAUNAL PAGE-6

BAY Slat Top Top

WIDTH Width (r) (f) THWC 37 38 5/8 29140 2913638 39 5/8 29145 2914140 41 5/8 29153 29154 1006441 42 5/8 29158 29159 1120842 43 5/8 29171 29172R 1120643 44 5/8 29176 29177R 1660744 45 5/8 29181 29182 1120445 46 5/8 29186 29187 1121046 47 5/8 29191 29192 1121247 48 5/8 29196 29197 1121448 49 5/8 29201 29202 1121650 51 5/8 29211 29212 1121851 53 5/8 29226 29227 1039754 55 5/8 29236 29237 1286255 56 5/8 29245 29246 1122056 57 5/8 29250 29251 1122257 58 5/8 29225R 29256R58 59 60 5/8 29265 29266 1122860 61 5/8 29270 29271 1122461 62 5/8 29275 29276 1088862 63 5/8 29280 29281 1122668 69 5/8 29317 37362 11232

5/8” Pattern Top Door Slats


NOTE- On top slats with 5/8” pattern please specify whether it has rubber or felt seal. NOTE- On top slats with 5/8” pattern, the top slat with hardware comes with the rubber seal and 2 rollers. (On 5/8 pattern the top slat with hardware is the rubber top slat) NOTE- See pictures to left to determine which type of top slat you have.

Rubber Style

Old Style- Felt


Slat Slat

Width TOP THWC Width TOP THWC 38 3/8 67686 126476 37 7/8 306560 306539

38 7/8 306561 306540

41 3/8 91176R 95902 40 7/8 131256 30654142 3/8 40591 41 7/8 306562 30654243 3/8 91127R 94654 42 7/8 131257 30654344 3/8 91078 315028 43 7/8 131258 30654445 3/8 91057 44 7/8 306563 30654546 3/8 91084R 45 7/8 131259 30654647 3/8 91187 46 7/8 306564 30654748 3/8 73094 47 7/8 306565 306548

49 3/8 91064 105654 48 7/8 131260 30654951 3/8 67661R 315029 50 7/8 306566 30655053 3/8 68519R 126477 52 7/8 131262 30655155 3/8 69447R 90103 54 7/8 130179 30655256 3/8 73493 306971 55 7/8 306567 30655357 3/8 69736 323169 56 7/8 130174 30655458 3/8 69539R 59 3/8 67799R

60 3/8 63699R 59 7/8 306568 30655561 3/8 68598R 60 7/8 306569 30655662 3/8 91116R 61 7/8 131263 30655763 3/8 68982 62 7/8 306570 30655869 3/8 64693R 68 7/8 306571 306559

3/8” and 7/8” Pattern Top Slats


NOTE- The top slats with hardware come with felt seal and 2 rollers. NOTE- See pictures to left to determine which top slat you have.

Old style- Used prior to 1996, 3/8 patter slats

New Style- Used 1997 to current, 7/8 pattern slat.


2.50” ALUMINUM 2.5” PLASTIC SLATS

PART DESCRIPTION PART NUMBER

DESCRIPTION PART NUMBER

DESCRIPTION NUMBER 2.50X27.19 122979 2.50X52.81 302746

2.50X40.88 315284 2.50X35.31 127318 2.50X53.31 122981

2.50X41.38 302913 2.50X40.81 130170 2.50X53.38 995701

2.50X43.38 312342 2.50X41.31 126710 2.50X54.81 130177

2.50X49.38 124728 2.50X41.38 995711 2.50X55.31 124726

2.50X52.88 302747 2.50X42.81 315026 2.50X56.31 302752

2.50X54.88 315834 2.50X43.31 312341 2.50X56.81 130172

2.50X55.38 124729 2.50X43.38 995702 2.50X57.31 126703

2.50X56.88 302753 2.50X46.81 315027 2.50X58.31 312348

2.50X58.38 312349 2.50X49.31 124723 2.50X58.38 114373

2.50X52.31 127313

NOTE- Slats with a 5/8” pattern were NOTE- There is exceptions to the slat NOTE- None of these used until 1992. Slats with a 3/8” pattern within the years, especially slats are stock. pattern were used from 1992-1996 and in change over years. Please slats with a 7/8” pattern were from measure the slats. 1996 to current.

NOTE- The 2.5” aluminum slat replaces the plastic slat. NOTE- Look at pictures to left to compare.

2.5" Aluminum

2.5” Plastic


3” FINGERSLOT

SLATS



3.00X37.88 302494 3.00X48.88 131276

3.00X40.88 131273 3.00X48.88 131277

3.00X41.38 126711 3.00X49.38 124724

3.00X41.62 306404 3.00X49.88 131278

3.00X42.88 131274 3.00X52.88 131279

3.00X43.38 312343 3.00X53.38 130051

3.00X43.88 131275 3.00X53.62 312033

3.00X44.38 130269 3.00X68.62 315084

3.00X44.62 312032

NOTE- Slats with a 5/8” pattern were used until 1992. Slats with a 3/8” pattern were used from 1992-1996 and slats with a 7/8” pattern were used from 1996 to current. NOTE- There is exceptions to the slat pattern within the years, especially in change over years. Please measure the slat. NOTE- These slats are not stock

NOTE- The finger slat is our new current standard. If you have a trailer or body that does not have the finger slat and you would like to have them, next measure the slats you have, then order one finger slat and one 2” slat to replace a 5” slat already in your door. NOTE- See picture to left for finger slat.


RAW MATERIAL SLAT LENGTHS

PART # DISCRIPTION LENGTH DRAWING #

807058 5” DOOR SLAT 138.25” D-85S-042B 3435 5” DOOR SLAT 167.25” D-85S-042B 3533 3” DOOR SLAT 216.00” D-85S-041B 65319 2” DOOR SLAT 216.00” D-89S-107A 803315 TOP SLAT NEW STYLE 216.00” PTC0169B 803337 BOTTOM SLAT NEW STYLE 216.00” PTC0168A 802125 TOP SLAT OLD STYLE 216.00” D-85B-114B 802126 BOTTOM SLAT OLD STYLE 216.00” D-85S-029B 803375 2.5” ALUMINUM SLAT 216.00” PTC0170B 83841 5” HEAVY DUTY SLAT 216.00” D-85S-040B 3488 TOP SLAT-RUBBER STYLE 167.25” D-85S-030D 803161 3” FINGERSLOT SLAT 216.00” D-95B-250 802428 2.5” PLASTIC SLAT 216.00” D-93B-227A


COUNTERBALANCE PARTS


SINGLE SPRING BAY ASM 1" TUBE BAY ASM 1" TUBE

WIDTH NUMBER LENGTH WIDTH NUMBER LENGTH20 40874 22.62 56 40912 58.62 21 40875 23.62 57 40913 59.62 22 119108 24.62 58 40914 60.62 23 40876 25.62 59 40915 61.62 24 40877 26.62 60 40916 62.62 25 40878 27.62 61 40917 63.62 26 40879 28.62 62 40918 64.62 27 N/A 29.62 63 40919 65.62 28 40880 30.62 64 40921 66.62 29 40881 31.62 DOUBLE SPRING 30 40882 32.62 COUNTERBALANCE 31 40883 33.62 65 40924 67.62 32 40884 34.62 66 40925 68.62 33 40885 35.62 67 40926 69.62 34 40886 36.62 68 40927 70.62 35 N/A 37.62 69 40928 71.62 36 40887 38.62 70 40929 72.62 37 40888 39.62 71 40930 73.62 38 40889 40.62 72 40931 74.62 39 40890 41.62 73 40932 75.62 40 40891 42.62 74 40933 76.62 41 40893 43.62 75 40934 77.62 42 40896 44.62 76 40935 78.62 43 40897 45.62 77 40936 79.62 44 40945 46.62 78 40937 80.62 45 40899 47.62 79 40938 81.62 46 40900 48.62 80 40939 82.62 47 40901 49.62 81 40940 83.62 48 40902 50.62 82 111475 84.62 48 40903 51.62 83 40941 85.62 50 40904 52.62 84 103125 86.62 51 40906 53.62 85 40942 87.62 52 40907 54.62 86 N/A 88.62 53 40908 55.62 87 40943 89.62 54 40909 56.62 88 N/A 90.62 55 40911 57.62 89 106158 91.62

COUNTERBALANCE

NOTE- Counterbalances that are .62” long were used until 1996


SINGLE SPRING BAY ASM 1"TUBE BAY ASM 1"TUBE

WIDTH NUMBER LENGTH WIDTH NUMBER LENGTH20 131722 22.12 56 131704 58.12 21 131724 23.22 57 131706 59.12 22 131726 24.22 58 132331 60.12 23 131728 25.22 59 131710 61.12 24 131730 26.22 60 131495 62.12 25 131083 27.22 61 116691 63.12 26 131112 28.22 62 131708 64.12 27 N/A 29.22 63 131712 65.12 28 130263 30.22 64 131714 66.12 29 131734 31.22 DOUBLE SPRING 30 131736 32.22 COUNTERBALANCE 31 131738 33.22 65 130265 67.1232 124581 34.22 66 131742 68.1233 131740 35.22 67 131120 69.1234 131732 36.22 68 131744 70.1235 N/A 37.22 69 131746 71.1236 131432 38.12 70 131582 72.1237 131716 39.12 71 131748 73.1238 131718 40.12 72 131750 74.1239 131720 41.12 73 131752 75.1240 129596 42.12 74 129598 76.1241 131692 43.12 75 131754 77.1242 129603 44.12 76 131756 78.1243 131114 45.12 77 130246 79.1244 131694 46.12 78 131758 80.1245 131116 47.12 79 131760 81.1246 132032 48.12 80 131762 82.1247 131696 49.12 81 131764 83.1248 129601 50.12 82 131766 84.1249 131073 51.12 83 131768 85.1250 131698 52.12 84 131770 86.1251 131700 53.12 85 131772 87.1252 131118 54.12 86 N/A 88.1253 130274 55.12 87 131774 89.1254 131671 56.12 55 131702 57.12

COUNTERBALANCE

NOTE- Counterbalances that are .12” and .22” long were used from 1996 to current.


Felt Top Door Slat Seal- Part Number 1798 (used till 1996) Part Number 806458 (1997-Current)

Rubber Bottom Door Seal- Part Number 803332 (1997 to current) Use With New Style Bottom Slat. Rubber Bottom Door Seal- Part Number 1782 (pre-1997 units) Use With Old Style Bottom Slat

Door Cable- Part Number 1776 110” Part Number 2703 124” Part Number 802674 156”

Door-Roller- Part Number 65313 Use with 3/8 and 7/8 Door slat Will be replaced by the 805444.

Door-Roller- Part Number 805444 Replaces the 65313

Door-Roller- Part Number 1780 Used with 5/8 Door Slat

Washer-Offset Part Number 1775 Use with 1780 Roller


Door Strap- Part Number 1788 22.5” 1793 36”

Door Stop- Part Number 1813

Door Rubber- Top slat Part Number 1783. (Comes in 166” pieces) Use on rubber style top slat.

Footman Loop- Part Number 1781 Nuts and Bolts Sold Separate

Crutch Tip (For lock rod) Part Number 1805


Deluxe Lock Handle Part Number 805747 (Fits Left and Right Side)

Lock cylinder for Deluxe Lock Handle. Part Number- Key Series 1820- H501 3118- H502 1822- H503 1823- H504 1824- H505 1825- H506 1826- H507 1827- H508 1828- H509 1829- H510 1841- Spring 1455- Pin

Padlock Door Handle Part Number- 5248R (Left) 5249R (Right)

Padlock Door Handle Part Number 41263 (Fits Left or Right Side)

Center Case Asm. Part Number 25250R


PICTURE NOT

AVAILABLE

Combo Door Handle Part Number 992989 (Old Style)

Door Hold Back Part Number 30903

Door Keeper (Recessed) Part Number 30904

Door Keeper (Flush Mount) Part Number 30905

Combo Door Seal Part Number 1868

Combo Rubber Door Stop Part Number 1816

Combo Door Handle Part Number 811953 (Current Style)

HACKNEY-PARTS MANUAL PAGE 18

ALUMINUM REAR BUMPERS

Bumper- Rear Double HTR with Strap. Part Number 338076 (Also Available with Locking Bar)

PICTURE NOT

AVAILABLE

PICTURE NOT

AVAILABLE

Bumper- Rear Single HTR with Strap. Part Number 338077 (Also Available with Locking Bar)

Bumper- Rear Standard (No HTR) Part Number 338018


STEEL REAR BUMPERS

PICTURE NOT

AVAILABLE

PICTURE NOT

AVAILABLE

PICTURE NOT

AVAILABLE

Bumper- Rear Double HTR Part Number 22889R

Bumper- Rear Single HTR Part Number 22896R

Bumper- Rear Standard (No HTR) Part Number 13007R

NOTE- Bumpers also available in stainless steel and with a locking bar.


PICTURE NOT

AVALIABLE

PICTURE NOT

AVALIABLE

PICTURE NOT

AVALIABLE

PICTURE NOT

AVALIABLE

PICTURE NOT

AVALIABLE

PICTURE NOT

AVALIABLE

Rear Hand Truck Rack Steel

Double HTR P/N 28901

Single HTR P/N 28900

Front Hand Truck Rack Steel

Double HTR P/N

40009R

Single HTR P/N 4008R

Front & Rear Hand Truck Racks Aluminum

Front HTR P/N 338178

Rear HTR Kit Single P/N 338277 Double P/N 338278

Note- Both available with

lock bar


PICTURE NOT

AVALIABLE

PICTURE NOT

AVALIABLE

Wheelhouse Step Bar Steel

Bolt On Step Bar

Part Number 33419R

Spring Loaded Step Bar

Part Number 33420R

Wheelhouse Step Bar Aluminum

Part Number 323975

Spring for Wheelhouse Step Bar. Part Number 2502 Molded ABS Step 6” Part Number 3000 12” Part Number 3001 17” Part Number 32601

PICTURE NOT

AVALIABLE

Safety Hook Assembly (J-Hook) Left Side- Part Number 43844 Right Side- Part number 43972

PICTURE NOT

AVALIABLE

Step Assembly- Pull Out Aluminum- Part Number 118173R 24” Steel- Part number 34100R 21.75” Steel- Part Number 33474R

HACKNEY-PARTS MAUNAL PAGE 22

Lamps and Reflectors 12V

Light-Amber 2” Sealed Lamp Only Part Number 1742 Light-Red 2” Sealed Lamp Only Part Number 1743 (Not pictured)

Grommet For 2” Sealed Lamp Part number 83518

Light-Red S/T/T Sealed Lamp Part Number 1757

Grommet For 4” Sealed Lamp Part Number 83271

License Plate Lamp Part Number 3850

Grommet For License Plate Lamp Part Number 3851

PICTURE NOT

AVALIABLE

Reflector- Amber Part Number 1773 Reflector- Red Part Number 1774

Light- Amber Arrow Directional 7” Part Number 30213

Light- Stop/Tail 7” Part Number 30211

Light-Back Up/Dome Part Number 30212

PICTURE NOT

AVALIABLE

Shows Desktop.lnk HACKNEY-PARTS MANUAL PAGE 23

Wiring Harness


TRACK PLATES

Pictured Plate- FE Curved Track Cast Left Taper Part Number 83872 Plate- FE Curved Track Cast Right Taper Part Number 83873 Plate- RE Curved Track Cast Right Taper Part Number 83870 Plate- RE Curved Track Cast Left Taper Part Number 83871

Pictured Plate- MS Curved Track Cast Right Taper Part Number 83875 Plate- MS Curved Track Cast Left Taper Part Number 83874

PICTURE NOT

AVALIABLE

Large Removable Curve Track Part Number 1107

Small Removable Curve Track Part Number 1106

Permanent track Curve Right/Left Part Number 4074

Hackney Parts Ordering Guide

Page 28

Exterior Parts for Bodies and Trailers

See next page for Exterior parts reference table


Page 29

Parts Reference Table for Exterior Bodies & Trailers

Exterior Parts for Bodies & TrailersRef. Part Number

A Rear End Section Upper Panel *B Rear End Section Lower Panel *C Rivet of Upper & Lower Panel 83397D Side Corner Post - Specify front, rear, passenger or driver side *E Corner Cap - Specify front, rear, passenger or driver side *F Top Post � Specify front or rear *G Roof Sheet Coil *H Roof Edge Molding 807930I Top Rail *J Top Rail Molding (Newer units, the top rail molding is extruded with the top rail) *K Side Track Assembly - Specify deep bay or short bay *L Bottom Rail *M Wheel House Skirt - Specify driver side or passenger side *N Skirt Ring *O Skirt Rail *P End Section Side Track *Q Upper Front Cover *R Lower Front Cover *

* If part number was not indicated, please call the Hackney Parts Departmentfor price and availability.

** Please have serial number ready when calling.


Page 30

Interior Parts for Bodies from the 1960� to 1986 & for Trailers from the1970�s to 1985.

See next page for Interior parts reference table


Page 31


Page 32

Parts Reference Table for Interior Bodies from the 1960�s to 1986 & Trailersfrom the 1970�s to 1985.

Interior Parts For Bodies From 1960's to 1986 & for Trailers from 1970's to 1985Ref. Part Number

A Middle Section Multiple Track *B Vertical Partition Channels *C Read End Section Vertical Channels *D Read End Section Top Channel *E Deep Short Section Bottom Channel *F Partition Top Channel *G Partition Hat Section *H Cross Seal � Specify Rear, Front, Deep/Short, or Short/Short *L Front/Rear Track Plate - Specify Rear, Front, Passenger or Driver side *M Support Channel *N Mid Section Track Plate - Specify Passenger or Driver side *




Page 33

Interior Partsfor Bodies from 1987 to Present

and for Trailers from 1986 to Present

See next page for Interior parts reference table


Page 34

Parts reference Table for Exterior Bodies from 1987 to Present &Trailers from 1986 to Present.

Exterior Parts for Bodies from 1987 to Present & Trailers from 1986 to PresentRef. Part Number

A Rear End Section Upper Panel *B Rear End Section Lower Panel *C Rivet of Upper & Lower Panel 83397D Side Corner Post - Specify front, rear, passenger or driver side *E Corner Cap - Specify front, rear, passenger or driver side *F Top Post � Specify front or rear *G Roof Sheet Coil *H Roof Edge Molding 807930I Top Rail *J Top Rail Molding (Newer units, the top rail molding is extruded with the top rail) *K Side Track Assembly - Specify deep bay or short bay *L Bottom Rail *M Wheel House Skirt - Specify driver side or passenger side *N Skirt Ring *O Skirt Rail *P End Section Side Track *Q Upper Front Cover *R Lower Front Cover *




Page 35

Section 4Trailer Parts


Page 36

Landing Gear Assembly

Ref. Description Part Number

A Landing Gear Assembly -- Old UTX -- Butler 6079B Landing Gear Assembly -- New UTX -- Butler 4420C Landing Gear Assembly -- PDX � Butler 10798D Landing Gear Assembly -- TRH � Holland 49622E Handle for Butler Landing Gear 3643F Handle for Holland Landing Gear 1932* Crankshaft Bracket for Transport Trailer 1926* Landing Gear Hex Screw 1444


Page 37

Section 4Competitor Parts


Page 38

Competitor Parts

Make Description Part Number

Mickey Top slat 177" 811452

Mickey 5" Slat 177" 811453

Mickey Finger Slat 177" 811454

Mickey Bottom Slat 177" 811455

Mickey 3" Slat 177" 811456

Mickey Door Roller 811480

Mickey Counterbalance 323384

Mickey Track Liner 120" 811556

Hesse Bottom Slat 167.25" 3218

Hesse 2" Slat 167.25" 3220

Hesse 5" Slat 167.25" 3219

Hesse Door Roller 3221

Remke Bottom Slat 167.25" * 3174

* While stocks last

parts manual - hackney · hackney-parts manual dear customer: this manual, designed specifically...

Documents