part design ( u component ) - pandian...
TRANSCRIPT
PART DESIGN ( U COMPONENT )
From this diagram we have to know,
Selection of plane
Drawing circle
Drawing line
Pad the profile
Mirror extend
Hole making
Pocket definition h
Stiffener
Symmetry constraint
Trimming
Chamfer
Fillet
Rotate options
Views
CATIA v5 software is used to modeling this object.
Prepared by
Veerapandian.K Mechanical Engineering. SRVEC
DIAGRAM WITH DIMENSION
WORKING STEPS
First understand the dimensions given.
Select the suitable plane make sketch.
Draw the sketch like below with respect to given dimensions.
Prepare the diagram symmetry to UCS.
After completing above sketch give exit workbench.
Pad the sketch. Pick mirror extend option. Give dimension then make pad ok.
Draw the sketch like as below. We have known the dimensions given...
We need to derive some dimensions from other one.
Then draw the u sketch with given constraints.
Trim the excess profile from the sketch.
Complete the sketch without open profile.
Pick the pad tool.
Select the sketch give mirrors extend option.
Give dimension then click ok.
Select the other plane to draw the stiffener. Draw this for given dimension.
Mirror the stiffener component.
Then progress the diagram like follow as.
Make hole on the diagram respect to given diagram specification.